Sony FX3 Mode d'emploi

\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\00COV-ILMEFX3CEC\000COV.indd

2020/11/05 09:26

ILME-FX3

5-025-887-41(1)

\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\00COV-ILMEFX3CEC\000COV.indd

2020/11/05 09:26

ILME-FX3

5-025-887-41(1)

ILME-FX3

5-025-887-41(1)

E-mount

Interchangeable Lens Digital Camera/Startup Guide GB

Fotocamera digitale con obiettivo intercambiabile/Guida di avvio IT

Digitalkamera med utbytbart objektiv/Startguide SE

Digitalkamera mit Wechselobjektiv/Einführungsanleitung DE

Цифровой фотоаппарат со сменным объективом/Руководство по началу работы

RU

Digitale camera met verwisselbare lens/Beknopte gids NL

Digitalkamera med utskiftbart objektiv/Startveiledning NO

Appareil photo à objectif interchangeable/Guide de démarrage FR

Câmara Digital de Objetivas intercambiáveis/Guia de início PT

Digitaalinen kamera vaihdettavalla objektiivilla/Aloitusopas FI

Cámara Digital de Lentes Intercambiables/Guía de inicio ES

Цифрова камера зі змінним об’єктивом/Посібник із початку роботи

UA

Aparat cyfrowy z wymiennymi obiektywami/Przewodnik uruchamiania

PL

Digitalkamera med udskifteligt objektiv/Startvejledning DK

https://rd1.sony.net/help/ilc/2035/h_zz/

“Help Guide” (Web manual)

Refer to “Help Guide” for in-depth

instructions on the many

functions of the camera.

ILME-FX3

5-025-887-41(1)

GB

2

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

English

About the manual for this camera

This guide describes the necessary preparations to start using the

product, basic operations, etc. For details, refer to the “Help Guide” (web

manual).

https://rd1.sony.net/help/ilc/2035/h_zz/

“Help Guide” (Web manual)

ILME-FX3 Help Guide

ILME-FX3

5-025-887-41(1)

GB

3

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

GB

Preparations

Checking the supplied items

The number in parentheses indicates the number of pieces.

• Camera (1)

• Battery charger (1)

• Power cord (mains lead) (1)*

(supplied in some countries/

regions)

* Multiple power cords may be

supplied with this equipment. Use

the appropriate one that matches

your country/region. See “Notes

on use.”

• Rechargeable battery pack

NP-FZ100 (1)

• USB Type-C® cable (1)

• XLR handle unit (1)

• Accessory shoe kit (1)

• Body cap (1) (attached to the

camera)

• Shoe cap (1) (attached to the

camera)

• Handle shoe cap (1) (attached to

the handle)

• Startup Guide (this manual) (1)

• Reference Guide (1)

Identifying parts

For details on identifying parts, refer to the following Help Guide URL:

https://rd1.sony.net/help/ilc/2035_parts/h_zz/

ILME-FX3

5-025-887-41(1)

GB

4

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

Preparing the battery pack

1 Insert the battery pack into the

battery charger, and connect it to a

wall outlet (wall socket) using the

power cord (supplied).

• Place the battery pack on the

battery charger in the direction

of . Slide the battery pack in the

direction of the arrow as far as it

will go.

• When charging starts, the CHARGE

lamp on the battery charger will

light up. When charging is finished,

the CHARGE lamp and all indicators

turn off.

CHARGE lamp

To a wall outlet

(wall socket)

2 Insert the battery pack into the

camera.

• Open the battery cover, and then

insert the battery pack while

pressing the lock lever.

Lock lever

ILME-FX3

5-025-887-41(1)

GB

5

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

GB

Inserting a memory card into the camera

You can use CFexpress Type A memory cards and SD memory cards with this

camera.

Slot 1 Slot 2

Open the memory card cover and insert the memory card into Slot

1.

• Both Slot 1 and Slot 2 support CFexpress Type A memory cards and SD

memory cards.

• Insert a CFexpress Type A memory card with the label facing the

monitor, and an SD memory card with the terminal facing the monitor.

Insert the card until it clicks into place.

• You can change which memory card slot to use by selecting

MENU 

(Shooting)  [Media]  [ Rec. Media Settings] 

[Prioritize Rec. Media]. The Slot 1 is used in the default settings.

Hint

• When you use a memory card with the camera for the first time, it is recommended

that you format the card on the camera for more stable performance of the memory

card.

ILME-FX3

5-025-887-41(1)

GB

6

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

Attaching a lens

Mounting indexes

1 Remove the body cap from the camera and the rear lens cap from the

rear of the lens.

2 Mount the lens by aligning the two white index marks (mounting

indexes) on the lens and camera.

3 While pushing the lens lightly toward the camera, turn the lens slowly

in the direction of the arrow until it clicks into the locked position.

Attaching the XLR handle unit (supplied)

By attaching the XLR handle

unit, up to four audio devices

can be connected to the camera

simultaneously.

1 Remove the shoe cap from the

camera and the handle shoe cap

from the XLR handle unit.

2 Slide the XLR handle unit into

the Multi Interface Shoe until

it reaches the back of the shoe.

Then, be sure to securely tighten

the screws on either side using a

coin, etc.

Screw

ILME-FX3

5-025-887-41(1)

GB

7

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

GB

Setting the language and the clock

Power switch

Control wheel

Select items : ////

/

Confirm : Center button

1 Set the power switch to “” (On) to turn on the camera.

2 Select the desired language and then press the center of the control

wheel.

3 Make sure that [Enter] is selected on the area/date/time confirmation

screen, and then press the center of the control wheel.

4 Select the desired geographic location, set [Daylight Savings], and then

press the center.

• [Daylight Savings] can be switched on/off using the top/bottom of

the control wheel.

5 Set the date format (year/month/day), and press the center.

6 Set the date and time (hour/minute/second), and press the center.

• To set the date and time or geographic location again at a

later point, select MENU 

(Setup)  [Area/Date] 

[Area/Date/Time Setting].

ILME-FX3

5-025-887-41(1)

GB

8

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

Shooting

Shooting movies

MODE (Mode) button REC (Recording) button

Control wheel

6/REC (Custom 6/Recording)

button

1 Press the MODE (Mode) button, use the control wheel to select

(Movie), and then press the center.

2 Press the REC (Recording) button to start recording.

Movie recording can be started from any shooting mode in the default

setting.

3 Press the REC button again to stop recording.

Shooting still images

1

Press the MODE (Mode) button,

use the control wheel to select

the desired shooting mode, and

then press the center of the control

wheel.

Shutter button

MODE (Mode) button

Control wheel

2 Press the shutter button halfway

down to focus.

3 Press the shutter button all the way

down.

ILME-FX3

5-025-887-41(1)

GB

9

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

GB

Viewing

1 Press the (Playback) button to

switch to the playback mode.

(Playback) button

Control wheel

2 Select an image with the control

wheel.

You can move to the previous image/

next image by pressing the left/right

side of the control wheel.

To start playing back a movie, press

the center button on the control

wheel.

List of MENU items

For details on menu settings on the camera, refer to the following Help

Guide URL:

https://rd1.sony.net/help/ilc/2035_menu/h_zz/

ILME-FX3

5-025-887-41(1)

GB

10

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

Notes on use

Refer to “Precautions“ in the “Help Guide”

as well.

Notes on handling the product

• This camera is designed to be dust-

and moisture-resistant, but is not

waterproof or dust-proof.

• Do not leave the lens exposed to a

strong light source such as sunlight.

Because of the lens’s condensing

function, doing so may cause smoke,

fire, or a malfunction inside the camera

body or the lens.

• If sunlight or other strong light enters

the camera through the lens, it may

focus inside the camera and cause

smoke or fire. Attach the lens cap when

storing the camera. When shooting

with backlighting, keep the sun

sufficiently far away from the angle

of view. Even if it is slightly away from

the angle of view, smoke or fire may

still occur.

• Do not directly expose the lens to

beams such as laser beams. That may

damage the image sensor and cause

the camera to malfunction.

• Do not look at sunlight or a strong

light source through the lens when

it is detached. This may result in

unrecoverable damage to the eyes or

cause a malfunction.

• This camera (including accessories)

has magnet(s) which may interfere

with pacemakers, programmable shunt

valves for hydrocephalus treatment, or

other medical devices. Do not place this

camera close to persons who use such

medical devices. Consult your doctor

before using this camera if you use any

such medical device.

• Increase the volume gradually. Sudden

loud noises can damage your ears. Be

especially careful when listening to

headphones.

• Do not leave the camera, the supplied

accessories, or memory cards within

the reach of infants. They may be

accidentally swallowed. If this occurs,

consult a doctor immediately.

• While the cooling fan is in operation,

be careful not to let any objects get

sucked into the fan.

Notes on the monitor

• The monitor is manufactured using

extremely high-precision technology,

and over 99.99% of the pixels

are operational for effective use.

However, there may be some small

black dots and/or bright dots (white,

red, blue or green in color) that

constantly appear on the monitor.

These are imperfections due to the

manufacturing process and do not

affect the recorded images in any way.

• If the monitor is damaged, stop using

the camera immediately. The damaged

parts may harm your hands, face, etc.

Notes on continuous shooting

During continuous shooting, the monitor

may flash between the shooting screen

and a black screen. If you keep watching

the screen in this situation, you may

experience uncomfortable symptoms

such as feeling of unwellness. If you

experience uncomfortable symptoms,

stop using the camera, and consult your

doctor as necessary.

Notes on recording for long periods of

time or recording 4K movies

• The camera body and battery may

become warm with use – this is normal.

• If the same part of your skin touches

the camera for a long period of time

while using the camera, even if the

camera does not feel hot to you, it may

cause symptoms of a low-temperature

burn such as redness or blistering.

Pay special attention in the following

situations and use a tripod, etc.

- When using the camera in a high

temperature environment

- When someone with poor circulation

or impaired skin sensation uses the

camera

- When using the camera with

[Auto Power OFF Temp.] set to [High]

ILME-FX3

5-025-887-41(1)

GB

11

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

GB

Notes on using memory cards

• When recording is finished, the

memory card may become hot. This is

not a malfunction.

• If (overheating warning icon) is

displayed on the monitor, do not

remove the memory card from the

camera right away. Instead, wait for a

while after turning off the camera, and

then remove the memory card. If you

touch the memory card while it is hot,

you may drop it and the memory card

may be damaged. Be careful when

removing the memory card.

Notes on using a tripod

Use a tripod with a screw less than

5.5mm (7/32 inches) long. Otherwise,

you cannot firmly secure the camera, and

damage to the camera may occur.

Sony lenses/accessories

Using this unit with products from

other manufacturers may affect its

performance, leading to accidents or

malfunction.

Warning on copyrights

Television programs, films, videotapes,

and other materials may be copyrighted.

Unauthorized recording of such materials

may be contrary to the provisions of the

copyright laws.

Notes on location information

If you upload and share an image

tagged with a location, you may

accidentally reveal the information to a

third party. To prevent third parties from

obtaining your location information,

set [Location Info Link] to [Off] before

shooting images.

Notes on discarding or transferring this

product to others

Before discarding or transferring this

product to others, be sure to perform the

following operation to protect private

information.

• Select [Setting Reset]  [Initialize].

Notes on discarding or transferring a

memory card to others

Executing [Format] or [Delete] on

the camera or a computer may not

completely delete the data on the

memory card. Before transferring a

memory card to others, we recommend

that you delete the data completely using

data deletion software. When discarding

a memory card, we recommend that you

physically destroy it.

Note on network functions

When you use network functions,

unintended third parties on the network

may access the camera, depending on

the usage environment. For example,

unauthorized access to the camera may

occur in network environments to which

another network device is connected or

can connect without permission. Sony

bears no responsibility for any loss or

damage caused by connecting to such

network environments.

Note on the 5GHz band for wireless LAN

When using the wireless LAN function

outdoors, set the band to 2.4GHz

by following the procedure below.

(WW728473 only)

• MENU  (Network)  [Wi-Fi] 

[Wi-Fi Frequency Band]

How to turn off wireless network

functions (Wi-Fi, etc.) temporarily

When you board an airplane, etc., you

can turn off all wireless network functions

temporarily using [Airplane Mode].

Notes on the XLR handle unit (supplied)

• Before connecting/disconnecting an

external microphone or device to/from

the INPUT1 or INPUT2 jack, be sure to

set the INPUT1 (LINE/MIC/MIC+48V)

or INPUT2 (LINE/MIC/MIC+48V) switch

to a position other than “MIC+48V.”

Plugging/unplugging the cable into/

from the external microphone or device

while the switch is set to “MIC+48V”

may cause loud noise or a malfunction

of the device.

• While recording is in progress,

operating and handling noises from

the camera or lens may be recorded.

Touching the handle while recording

is in progress will cause noise to be

included in the recording.

ILME-FX3

5-025-887-41(1)

GB

12

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

• While recording is in progress, do not

change the INPUT1 or INPUT2 switch

settings.

• If the microphone of the handle is

in proximity to a speaker, acoustic

feedback may occur. In this case, move

the handle away from the speaker to

allow the maximum distance between

the microphone and the speaker, or

lower the speaker volume.

• If dust or water droplets are present

on the surface of the microphone,

successful recording may not be

possible. Be sure to clean the

microphone surface before using the

handle.

• Turn off the camera before attaching/

removing the handle.

• When the handle is connected

to the camera and the

HANDLE AUDIO ON/OFF switch is set

to ON, the internal microphone of the

camera cannot record audio input.

• When attaching the handle to the

camera, fasten the two handle-

attachment screws securely.

• Using the handle without fastening

the handle-attachment screws may

damage the Multi Interface Shoe

terminal or cause the handle to fall off.

Power Cord

For the customers in the UK, Ireland,

Malta, Cyprus and Saudi Arabia

Use the power cord (A).

For safety reasons, the power cord (B) is

not intended for above countries/regions

and shall therefore not be used there.

For the customers in other EU

countries/regions

Use the power cord (B).

(A) (B)

For Customers in the U.S.A.

For question regarding your product or

for the Sony Service Center nearest you,

call 1-800-222-SONY (7669) .

Supplier’s Declaration of Conformity

Trade Name : SONY

Model : WW728473

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego,

CA 92127 U.S.A.

Telephone Number : 858-942-2230

This device complies with part 15 of

the FCC rules. Operation is subject

to the following two conditions: (1)

This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

Specifications

Camera

[System]

Camera Type: Interchangeable Lens

Digital Camera

Lens: Sony E-mount lens

[Image sensor]

Image format: 35mm full frame

(35.6mm × 23.8mm), CMOS image

sensor

Effective pixel number of camera:

Approx. 12100000 pixels

Total pixel number of camera:

Approx. 12900000 pixels

[Monitor]

7.5 cm (3.0 type) TFT drive, touch

panel

ILME-FX3

5-025-887-41(1)

GB

13

C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd

DTP data saved: 2020/11/06 20:15

PDF file created: 2020/11/06 20:16

GB

[General]

Rated input: 7.2V

, 7.3W

(during movie recording)

Operating temperature:

0 to 40°C (32 to 104°F)

Storage temperature:

–20 to 55°C (–4 to 131°F)

Dimensions (W/H/D) (Approx.):

129.7 × 77.8 × 84.5mm

51/8 × 31/8 × 33/8in.

Mass (Approx.):

715g (1lb 9.3oz) (including battery

pack, SD card)

[Wireless LAN]

WW728473 (see name plate on the

bottom of camera)

Supported format:

IEEE802.11a/b/g/n/ac

Frequency band: 2.4GHz/5GHz

Security: WEP/WPA-PSK/WPA2-PSK

Connection method:

Wi-Fi Protected Setup™ (WPS)/

Manual

Access method: Infrastructure mode

WW558244 (see name plate on the

bottom of camera)

Supported format: IEEE 802.11 b/g/n

Frequency band: 2.4 GHz

Security: WEP/WPA-PSK/WPA2-PSK

Connection method:

Wi-Fi Protected Setup™ (WPS)/

Manual

Access method: Infrastructure mode

XLR handle unit

Mass (Approx.): 300 g (10.6 oz)

Battery charger BC-QZ1

Rated input:

100- 240V

, 50/60Hz, 0.38A

Rated output: 8.4V , 1.6A

Rechargeable battery pack

NP-FZ100

Rated voltage: 7.2V

Design and specifications are subject

to change without notice.

Trademarks

• XAVC S and are registered

trademarks of Sony Corporation.

• XAVC HS and are registered

trademarks of Sony Corporation.

• USB Type-C® and USB-C®

are registered trademarks of

USB Implementers Forum.

• Android and Google Play are

trademarks or registered trademarks of

Google LLC.

• Wi-Fi, the Wi-Fi logo and

Wi-Fi Protected Setup are registered

trademarks or trademarks of the

Wi-Fi Alliance.

• QR Code is a trademark of

Denso Wave Inc.

• In addition, system and product names

used in this manual are, in general,

trademarks or registered trademarks

of their respective developers or

manufacturers. However, the ™ or 

marks may not be used in all cases in

this manual.

Additional information on this

product and answers to frequently

asked questions can be found at our

Customer Support Website.

ILME-FX3

5-025-887-41(1)

FR

2

\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd

DTP data saved: 2020/11/05 11:31

PDF file created: 2020/11/06 13:23

Français

À propos du manuel pour cet

appareil

Ce guide décrit les préparatifs nécessaires pour commencer à utiliser le

produit, les fonctions de base, etc. Pour plus d’informations, consultez le

«Guide d’aide» (manuel en ligne).

https://rd1.sony.net/help/ilc/2035/h_zz/

«Guide d’aide» (Manuel en ligne)

ILME-FX3 Guide d’aide

ILME-FX3

5-025-887-41(1)

FR

3

\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd

DTP data saved: 2020/11/05 11:31

PDF file created: 2020/11/06 13:23

FR

Préparatifs

Vérification des éléments fournis

Le nombre indiqué entre parenthèses correspond au nombre d’éléments

fournis.

• Appareil photo (1)

• Chargeur de batterie (1)

• Cordon d’alimentation (1)* (fourni

dans certains pays/régions)

* Plusieurs cordons d’alimentation

peuvent être fournis avec cet

équipement. Utilisez le cordon

approprié qui correspond à votre

pays ou région. Voir «Remarques

sur l’utilisation».

• Batterie rechargeable NP-FZ100

(1)

• Câble USB Type-C® (1)

• Poignée XLR (1)

• Trousse de griffe porte-accessoire

(1)

• Capuchon de boîtier (1) (fixé à

l’appareil photo)

• Capuchon de la griffe (1) (fixé à

l’appareil photo)

• Cache de la griffe de la poignée

(1) (fixé sur la poignée)

• Guide de démarrage (ce manuel)

(1)

• Guide de référence (1)

Identification des pièces

Pour en savoir plus sur l’identification des pièces, consultez l’URL du Guide

d’aide suivante:

https://rd1.sony.net/help/ilc/2035_parts/h_zz/

ILME-FX3

5-025-887-41(1)

FR

4

\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd

DTP data saved: 2020/11/05 11:31

PDF file created: 2020/11/06 13:23

Préparation de la batterie

1 Insérez la batterie dans le chargeur

de batterie et branchez-la à une

prise murale à l’aide du cordon

d’alimentation (fourni).

• Insérez la batterie sur le chargeur

de batterie dans le sens de . Faites

glisser la batterie à fond dans la

direction de la flèche.

• Lorsque la charge commence, le

témoin CHARGE s’allume sur le

chargeur de batterie. Lorsque la

batterie est chargée, le témoin

CHARGE et tous les autres témoins

s’éteignent.

Témoin CHARGE

Vers la prise

murale

2 Insérez la batterie dans l’appareil.

• Ouvrez le couvercle du

compartiment de la batterie, puis

insérez la batterie tout en appuyant

sur le levier de verrouillage.

Levier de verrouillage

ILME-FX3

5-025-887-41(1)

FR

5

\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd

DTP data saved: 2020/11/05 11:31

PDF file created: 2020/11/06 13:23

FR

Insertion d’une carte mémoire dans l’appareil photo

Vous pouvez utiliser les cartes mémoire CFexpress Type A et les cartes

mémoire SD avec cet appareil.

Fente 1 Fente 2

Ouvrez le couvercle de carte mémoire et insérez la carte mémoire

dans la fente 1.

• La fente 1 et la fente 2 acceptent toutes deux les cartes mémoire

CFexpress Type A et les cartes mémoire SD.

• Insérez une carte mémoire CFexpress Type A avec l’étiquette tournée

vers l’écran, et une carte mémoire SD avec le connecteur tourné vers

l’écran. Insérez la carte jusqu’au clic d’enclenchement.

• Vous pouvez changer la fente de carte mémoire utilisée en

sélectionnant MENU 

(Prise de vue)  [Support] 

[

Réglag. supp. enr.]  [Prior. support d'enr.]. La fente 1 est utilisée

par défaut.

Astuce

• Lorsque vous utilisez une carte mémoire pour la première fois avec cet appareil,

nous vous recommandons de la formater avec l’appareil, afin de garantir une

performance stable de la carte mémoire.

ILME-FX3

5-025-887-41(1)

FR

6

\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd

DTP data saved: 2020/11/05 11:31

PDF file created: 2020/11/06 13:23

Fixation d’un objectif

Repères de montage

1 Retirez le capuchon de boîtier de l’appareil et le capuchon d’objectif

arrière de l’arrière de l’objectif.

2 Installez l’objectif en alignant le repère blanc de l’objectif et celui de

l’appareil photo (repères de montage).

3 Tout en poussant doucement l’objectif vers l’appareil, tournez

lentement l’objectif dans le sens de la flèche jusqu’à ce qu’il s’enclenche

en position verrouillée.

Fixation de la poignée XLR (fourni)

En fixant la poignée XLR, vous pouvez

raccorder simultanément jusqu’à

quatre périphériques audio à l’appareil.

1 Retirez le capuchon de la griffe de

l’appareil et le cache de la griffe de

la poignée XLR.

2 Faites glisser la poignée XLR dans

la griffe multi-interface jusqu’à ce

qu’elle atteigne l’arrière de la griffe.

Ensuite, assurez-vous que les vis

sont bien serrées de chaque côté à

l’aide d’une pièce de monnaie, etc.

Vis

ILME-FX3

5-025-887-41(1)

FR

7

\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd

DTP data saved: 2020/11/05 11:31

PDF file created: 2020/11/06 13:23

FR

Réglage de la langue et de l’horloge

Interrupteur d’alimentation

Molette de commande

Pour sélectionner des éléments:

////

/

Pour confirmer: Bouton central

1 Placez l’interrupteur d’alimentation sur «» (activé) pour allumer

l’appareil.

2 Sélectionnez la langue souhaitée et appuyez au centre de la molette de

commande.

3 Assurez-vous que [Entrer] est sélectionné sur l’écran de confirmation

de la zone/date/heure, puis appuyez au centre de la molette de

commande.

4 Sélectionnez l’emplacement géographique souhaité, réglez

[Heure d'été], puis appuyez au centre.

• [Heure d'été] peut être activé/désactivé en appuyant sur le côté

supérieur/inférieur de la molette de commande.

5 Réglez le format de la date (année/mois/jour), puis appuyez au centre.

6 Réglez la date et l’heure (heure/minute/seconde), puis appuyez au

centre.

• Pour régler à nouveau la date et l’heure ou l’emplacement

géographique ultérieurement, sélectionnez MENU 

(Réglage) 

[Zone/date]  [Réglag. zone/date/h].

ILME-FX3

5-025-887-41(1)

FR

8

\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd

DTP data saved: 2020/11/05 11:31

PDF file created: 2020/11/06 13:23

Prise de vue

Enregistrement de films

Bouton MODE (Mode) Bouton REC (Enregistrement)

Molette de commande

Bouton 6/REC

(Personnalisée 6/Enregistrement)

1 Appuyez sur le bouton MODE (Mode) et utilisez la molette de

commande pour sélectionner (Film), puis appuyez au centre.

2 Appuyez sur le bouton REC (Enregistrement) pour commencer l’enregistrement.

L’enregistrement de films peut être lancé depuis n’importe quel mode de

prise de vue par défaut.

3 Appuyez à nouveau sur le bouton REC pour arrêter l’enregistrement.

Prise d’images fixes

1

Appuyez sur le bouton MODE

(Mode) et utilisez la molette de

commande pour sélectionner le

mode de prise de vue souhaité, puis

appuyez au centre la molette de

commande.

Déclencheur

Bouton MODE (Mode)

Molette de commande

2 Enfoncez le déclencheur à mi-course

pour effectuer la mise au point.

3 Enfoncez complètement le

déclencheur.

La page charge ...

Sony FX3 Mode d'emploi

Ce manuel convient également à

Sony FX3 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents