Whirlpool WEE750H0HV Le manuel du propriétaire

Marque: Whirlpool

Modèle: WEE750H0HV

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Ce manuel convient également à

THANK YOU for purchasing this high-quality product. Register your new range at www.whirlpool.com. In Canada, register your range

at www.whirlpool.ca.

For future reference, please make a note of your product model and serial numbers. These can be located on the oven frame behind the

top right side of the oven door.

Model Number__________________________________________ Serial Number__________________________________________

Table of Contents

W11085352E

USER GUIDE

ELECTRIC RANGE

RANGE SAFETY .............................................................................2

The Anti-Tip Bracket ....................................................................2

KEY USAGE TIPS ...........................................................................4

AquaLift

Self-Cleaning Technology ............................................4

Surface Temperatures ..................................................................4

Preheating ....................................................................................4

Ceramic Glass Cooktop Cleaning ...............................................4

FEATURE GUIDE ............................................................................5

Touch Panel ..................................................................................6

Display ..........................................................................................6

Display Navigation .......................................................................6

Setup and Demo Mode ................................................................ 6

Cooking Methods ......................................................................... 6

Favorites .......................................................................................8

Assisted Cooking .........................................................................8

Tools .............................................................................................9

More Modes ...............................................................................10

COOKTOP ....................................................................................11

Cookware ...................................................................................13

Home Canning ...........................................................................14

OVEN USE .....................................................................................14

Aluminum Foil .............................................................................14

Positioning Racks and Bakeware ..............................................14

Oven Vent ...................................................................................15

Baking and Roasting ..................................................................15

Broiling........................................................................................16

Convection Cooking ..................................................................16

Oven Light ..................................................................................17

RANGE CARE ...............................................................................17

Clean Cycle ................................................................................17

General Cleaning ........................................................................18

TROUBLESHOOTING ..................................................................20

ACCESSORIES .............................................................................21

WARRANTY ..................................................................................22

RANGE SAFETY

The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the

anti-tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed.

Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

WARNING

Anti-Tip

Bracket

Range Foot

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the range, follow

basic precautions, including the following:

■ WARNING:

TO REDUCE THE RISK OF TIPPING OF

THE RANGE, THE RANGE MUST BE SECURED BY

PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK

IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE

RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO FLOOR OR WALL, AND

SLIDE RANGE BACK SO REAR RANGE FOOT IS

UNDER ANTI-TIP BRACKET.

■

CAUTION:

Do not store items of interest to children in

cabinets above a range or on the backguard of a range –

children climbing on the range to reach items could be

seriously injured.

■

Proper Installation – Be sure the range is properly installed

and grounded by a qualified technician.

■

Never Use the Range for Warming or Heating the Room.

■ Do Not Leave Children Alone – Children should not be left

alone or unattended in area where the range is in use.

They should never be allowed to sit or stand on any part of

the range.

■ Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the range.

■ User Servicing – Do not repair or replace any part of the

range unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

■ Storage in or on the Range – Flammable materials should

not be stored in an oven or near surface units.

■ Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

■ Use Only Dry Potholders – Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

■ DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS – Surface units may be hot even though they are

dark in color. Areas near surface units may become hot

enough to cause burns. During and after use, do not touch,

or let clothing or other flammable materials contact surface

units or areas near units until they have had sufficient time

to cool. Among those areas are the cooktop and surfaces

facing the cooktop.

■

Use Proper Pan Size – The range is equipped with one or

more surface units of different size. Select utensils having

flat bottoms large enough to cover the surface unit heating

element. The use of undersized utensils will expose a

portion of the heating element to direct contact and may

result in ignition of clothing. Proper relationship of utensil to

burner will also improve efficiency.

■ Never Leave Surface Units Unattended at High Heat

Settings – Boilover causes smoking and greasy spillovers

that may ignite.

■ Make Sure Reflector Pans or Drip Bowls Are in Place –

Absence of these pans or bowls during cooking may

subject wiring or components underneath to damage.

■ Protective Liners – Do not use aluminum foil to line surface

unit drip bowls or oven bottoms, except as suggested in the

manual. Improper installation of these liners may result in a

risk of electric shock, or fire.

■

Glazed Cooking Utensils – Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for range-top service without breaking

due to the sudden change in temperature.

■ Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units – To reduce the risk of burns,

ignition of flammable materials, and spillage due to

unintentional contact with the utensil, the handle of a

utensil should be positioned so that it is turned inward, and

does not extend over adjacent surface units.

■ Do Not Soak Removable Heating Elements – Heating

elements should never be immersed in water.

■

Do Not Cook on Broken Cooktop – If cooktop should

break, cleaning solutions and spillovers may penetrate the

broken cooktop and create a risk of electric shock. Contact

a qualified technician immediately.

■

Clean Cooktop With Caution – If a wet sponge or cloth is

used to wipe spills on a hot cooking area, be careful to

avoid steam burn. Some cleaners can produce noxious

fumes if applied to a hot surface.

■ Use Care When Opening Door – Let hot air or steam

escape before removing or replacing food.

■

Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in injury.

■ Keep Oven Vent Ducts Unobstructed.

■ Placement of Oven Racks – Always place oven racks in

desired location while oven is

cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

■ DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot even

though they are dark in color. Interior surfaces of an oven

become hot enough to cause burns. During and after use,

do not touch, or let clothing or other flammable materials

contact heating elements or interior surfaces of oven until

they have had sufficient time to cool. Other surfaces of the

appliance may become hot enough to cause burns – among

these surfaces are oven vent openings and surfaces near

these openings, oven doors, and windows of oven doors.

For self-cleaning ranges –

■ Do Not Clean Door Gasket – The door gasket is essential

for a good seal. Care should be taken not to rub, damage,

or move the gasket.

■ Do Not Use Oven Cleaners – No commercial oven cleaner

or oven liner protective coating of any kind should be used

in or around any part of the oven.

■ Clean Only Parts Listed in Manual.

■ Before Self-Cleaning the Oven – Remove broiler pan and

other utensils.

For units with ventilating hood –

■ Clean Ventilating Hoods Frequently – Grease should not

be allowed to accumulate on hood or filter.

■ When flambeing foods under the hood, turn the fan on.

For smart enabled ranges and ovens:

■ Remote operation – This appliance is configurable to allow

remote operation at any time. Do not store any flammable

materials or temperature sensitive items inside, on top or

near surface units of the appliance.

KEY USAGE TIPS

AquaLift

Self-Cleaning Technology

AquaLift

Self-Cleaning Technology is a ﬁrst-of-its-kind

cleaning solution designed to minimize the time, temperature,

and odors that ordinarily come with traditional self-cleaning

methods. With AquaLift

Self-Cleaning Technology, an innovative

coating on the interior of the oven is activated with heat and

water to release baked-on soil. To use AquaLift

Self-Cleaning

Technology, simply wipe out loose debris, pour water into the

oven bottom, and run the AquaLift

Self-Cleaning cycle. When

the cycle ﬁnishes in under 1 hour at a lower temperature than

in traditional self-cleaning methods, just wipe out the remaining

water and loose debris. See the “Clean Cycle” section for more

detailed instructions. For additional information, frequently

asked questions and videos on using AquaLift

Self-Cleaning

Technology, visit our website at http://whirlpoolcorp.com/

aqualift.

Surface Temperatures

When the range is in use, all range surfaces may become hot,

such as the knobs and oven door.

Warming or Storage Drawer

When the oven is in use, the drawer may become hot. Do not

store plastics, cloth, or other items that could melt or burn in

the drawer.

Oven Vent

The oven vent releases hot air and moisture from the oven and

should not be blocked or covered. Do not set plastics, papers,

or other items that could melt or burn near the oven vent.

Preheating

When beginning a Bake, Convect Bake, or Convect Roast cycle,

the oven will begin preheating after Start is pressed. The oven

will take approximately 12 to 15 minutes to reach 350°F (177°C)

with all of the oven racks provided with your oven inside the

oven cavity. Higher temperatures will take longer to preheat.

The preheat cycle rapidly increases the oven temperature. The

actual oven temperature will go above your set temperature to

offset the heat lost when your oven door is opened to insert food.

This ensures that when you place your food in the oven, the

oven will begin at the proper temperature. Insert your food when

the preheat tone sounds. Do not open the door during preheat

before the tone sounds.

Ceramic Glass Cooktop Cleaning

To avoid damaging the cooktop, do not use steel wool, abrasive

powder cleansers, chlorine bleach, rust remover, or ammonia.

1. Remove food/residue with the Cooktop Scraper.

■ For best results, use the Cooktop Scraper while the

cooktop is still warm but not hot to the touch. It is

recommended to wear an oven mitt while scraping

the warm cooktop.

■ Hold the Cooktop Scraper at approximately a 45° angle

against the glass surface and scrape the residue. It

will be necessary to apply pressure in order to remove

the residue.

Allow the cooktop to cool down completely before

proceeding to Step 2.

2. Apply a few dime-sized drops of affresh

Cooktop Cleaner

to the affected areas.

■ Rub affresh

Cooktop Cleaner onto the cooktop surface

with the blue Cooktop Cleaning Pad. Some pressure is

needed to remove stubborn stains.

■ Allow the cleaner to dry to a white haze before

proceeding to Step 3.

3. Polish with a clean, dry cloth or a clean, dry paper towel.

■ Repeat steps 1 through 3 as necessary for stubborn

or burned-on stains.

The Complete Cooktop Cleaner Kit is available for order and

includes the following:

■ Cooktop Scraper

■ Affresh

Cooktop Cleaner

■ Blue Cooktop Cleaning Pads

See the “Accessories” section for part numbers and information

on ordering.

FEATURE GUIDE

These instructions cover several models. Your model may have some or all of the items listed. Refer to these instructions or the

Frequently Asked Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions. In Canada, visit our

website at www.whirlpool.ca.

Keypad Feature Instructions

Oven Power Oven function

power

The Oven Power keypad begins oven function and wakes it from sleep mode.

Home Home screen

If pressed once, the Home Screen enables the user to return to the “Cooking Methods” and

“Assisted Cooking” screen.

Oven Light Oven cavity light

The oven light is controlled by a keypad on the oven control panel. While the oven door

is closed, press the oven light keypad to turn the light on and off. When the oven door is

opened, the Oven Light will automatically turn on.

Oven Cancel Oven function

cancel

The Oven Cancel keypad stops any oven function except the Clock, Timer, and Control Lock.

Tools Oven use

functions

Enables you to personalize the audible tones and oven operation to suit your needs. See the

“Tools” and “More Modes” sections.

Favorites Favorites screen

The Favorites keypad allows the user to save and access the cycles that they use on a

frequent basis.

Touch Panel

The touch panel houses the control menu and function controls.

The touch keypads are very sensitive and require only a touch to

activate.

Scroll up, down, left, or right to explore the different options and

features.

For more information about the individual controls, see their

respective sections in this manual.

Display

The display is for both the menu and oven function controls. The

touch panel allows you to scroll through the oven menus. The

display is very sensitive and requires only a light touch to activate

and control.

When the oven is in use, the display will show the clock, mode,

oven temperature, kitchen timer, and oven timer, if set. If the oven

timer is not set, you can set it from this screen.

During use, the display will show menus and the appropriate

selections for the options being chosen.

Display Navigation

If the oven is off, touch the Home keypad to activate the menu.

From this screen, all automatic cooking programs can be

activated, all manual cooking programs can be set, options

can be adjusted, and instructions, preparation, and tips can be

accessed.

Setup and Demo Mode

1. Select STORE DEMO MODE to enter Demo Mode.

1. Select NEXT to enter into product use.

2. Follow the prompts on the display screen to select a

language, set up Wi-Fi/connect to network, accept the terms

of service, and set the time.

NOTE: The display screen will show the time and date

(default screen/standby mode).

3. If you selected Store Demo Mode, select TRY THE PRODUCT

to explore various features and options of the product.

OPTIONAL: Select VIEW PRODUCT VIDEOS to view a video

about how to navigate and interact with the product, explore

Voice Control, and Scan-To-Cook.

4. Scroll and select EXPLORE.

5. Select the Tools keypad.

To exit Demo mode, see the “Tools” section.

Cooking Methods

The Cooking Methods keypad allows users to select one of the cooking methods below according to their cooking needs:

■ Bake

■ Broil

■ Convect Bake

■ Convect Broil

■ Convect Roast

■ Keep Warm

To Use:

1. Touch the Home keypad.

2. Select the Cooking Methods keypad.

3. Select desired cooking method.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

Cooking Method Feature Instructions

BAKE Baking and

roasting

1. Select BAKE.

2. Select the desired temperature by scrolling left to right or manually by selecting the grid in

the upper right corner and entering the BAKE temperature into the keypad.

3. Select START to begin preheating. A tone will sound when preheating is complete.

(Optional) To quickly preheat the oven, see the “Rapid” section for more information in this

section.

4. Press the Cancel keypad when ﬁnished.

BROIL Broiling

1. Select BROIL.

2. Select the desired temperature by scrolling left to right or manually by selecting the grid in

the upper right corner and entering the BROIL temperature into the keypad.

3. Select START to begin broiling.

4. Press the Cancel keypad when ﬁnished.

Cooking Method Feature Instructions

CONVECT BAKE Convection

baking

1. Select CONVECT BAKE.

2. Select the desired temperature by scrolling left to right or manually by selecting the grid in

the upper right corner and entering the CONVECT BAKE temperature into the keypad.

3. Select START to begin preheating. A tone will sound when preheating is complete.

(Optional) To quickly preheat the oven, see the “Rapid” section.

4. Press the Cancel keypad when ﬁnished.

For more information, see the “Convection Cooking” section.

CONVECT BROIL Convection

broiling

1. Select CONVECT BROIL.

2. Select the desired temperature by scrolling left to right or manually by selecting the grid in

the upper right corner and entering the CONVECT BROIL temperature into the keypad.

3. Select START.

4. Press the Cancel keypad when ﬁnished.

For more information, see the “Convection Cooking” section.

CONVECT

ROAST

Convection

roasting

1. Select CONVECT ROAST.

2. Select the desired temperature by scrolling left to right or manually by selecting the grid in

the upper right corner and entering the CONVECT ROAST temperature into the keypad.

3. Select START.

4. Press the Cancel keypad when ﬁnished.

For more information, see the “Convection Cooking” section

KEEP WARM Keep warm

Food must be at serving temperature before placing it in the warmed oven.

1. Select KEEP WARM.

2. Select the desired temperature by scrolling left to right or manually by selecting the grid in

the upper right corner and entering the desired temperature into the keypad.

3. Press START.

4. Press the Cancel keypad when ﬁnished.

RAPID Rapid oven

preheating

Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to off.

1. Select RAPID to toggle between turning the rapid preheat off and on.

2. The current setting will be displayed.

IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be

removed prior to Rapid Preheat. A standard rack should be used for Rapid Preheat.

If preheating for the BAKE cycle has already started, Rapid Preheat may be started by selecting

RAPID.

DELAY Delayed start

Delay is used to enter the ending cook time for an oven function with a delayed start. Once the

cooking method is selected, input the bake temperature. Select DELAY and follow the prompts

on the screen.

NOTE: Delay Start should not be used for foods such as breads and cakes because they may

not bake properly.

COOK TIME Timed cooking

Cook Time allows the oven to be set to turn on, cook for a set length of time, and/or shut off

automatically.

Favorites

The Favorites feature stores the oven mode and temperature for

your favorite recipe.

As you continue to utilize your Favorites tool, your product will

reﬁne and tailor suggestions towards your cooking cravings/

needs.

NOTE: A select set of Favorites and suggestions may be

automatically shown on the Home screen based on your meal

times.

To save a recipe, select the Favorites keypad (heart icon) and

follow the prompts on the screen to customize your favorites.

Add an image or name to the favorite to customize it to your

preferences.

Assisted Cooking

Assisted cooking helps you select the right mode for your everyday cooking needs. Some modes allow you to skip preheat. Follow the

prompts on screen for guidance throughout the cooking process.

NOTE: Traditional bake temperatures will be converted to convection bake temperatures. Convect Bake requires time and temperature

input. It also requires preheat. Traditional roast times will be converted to convection roast times. Convect Roast requires time and

temperature input, but preheat is not required. Some modes will convert standard bake times for convection cooking. Input your time

and temperature and your screen will convert accordingly.

Assisted

Cooking Modes

Food Selections Tips for best results

FROZEN

■ Frozen Pizza

■ Frozen Pie

■ Frozen Fries

■ Frozen Lasagna

■ Frozen Nuggets

■ Frozen Meals

Frozen foods do not require preheat. Insert food right away. Input the

manufacturer’s maximum recommended time and temperature.

For more information, see the “Frozen Bake™” section.

POULTRY

■ Chicken Pieces

■ Whole Chicken

Poultry food items do not require preheat. Insert food right away.

SEAFOOD

■ Fish Fillet

■ Fish Sticks

Fish Fillet and Fish Sticks require preheat. Insert food when preheat is complete.

BAKED GOODS

■ Biscuits

■ Croissants

Baked Goods require preheat. Insert food when preheat is complete.

DESSERTS

■ Cake

■ Fresh Pie

■ Cookies

■ Frozen Pie

Cake, Cookies, and Fresh Pies requires preheat. Insert food when preheat is

complete.

Frozen Pie does not require preheat. Insert food right away. Input the

manufacturer’s maximum recommended time and temperature.

PIZZA

■ Fresh Pizza

■ Frozen Pizza

Fresh Pizza does require preheat.

Frozen Pizza does not require preheat. Insert food right away, and then input

the manufacturer’s maximum recommended time and temperature. For more

information, see the “Frozen Bake™” section.

MEATS

■ Meatloaf

■ Pork Roast

■ Beef Roast

■ Lamb Roast

Meatloaf requires preheat. Insert food when preheat is complete.

Lamb, Beef, and Pork Roasts do not require preheat. Insert food right away.

VEGGIES

■ Baked Potato

■ Roasted Fresh Veggies

Roasted Fresh Veggies and Baked Potato do not require preheat. Insert food right

way.

CASSEROLES

■ Casserole

■ Frozen Lasagna

Casserole does require preheat. Insert food when preheat is complete.

Frozen Lasagna does not require preheat. Insert food right away. Input the

manufacturer’s maximum recommended time and temperature. For more

information, see the “Frozen Bake™” section.

SNACKS

N/A Snacks require preheat. Insert food when preheat is complete.

Tools

The Tools keypad allows you access to functions and

customization options for your oven. These tools allow you to set

the clock, change the oven temperature between Fahrenheit and

Celsius, turn the audible signals and prompts on and off, adjust

the oven calibration, change the language, and more.

Select the Tools keypad to view the Tools features.

See the “More Modes” section for more information.

Tool Notes

Remote Enable

Select Remote Enable to enable the ability to

utilize the Whirlpool

app.

NOTE: Remote Enable does not turn off

when the door is opened. Do not store any

ﬂammable materials or temperature sensitive

items inside the oven.

Kitchen Timer

Set a kitchen timer by manually entering the

desired time into the keypad.

1. Select KITCHEN TIMER.

2. Manually input the time to the desired

timer length.

3. Select START.

4. Select the Cancel keypad to end the

Kitchen Timer.

Light

Select the LIGHT keypad to turn the light on

and off. When the oven door is opened, the

oven light will automatically turn on.

Self-Clean

See the “Range Care” section.

Mute

Select MUTE to mute or unmute the

oven sounds.

Control Lock

The Control Lock locks the control panel

keypads to avoid unintended use of the

oven(s). If set before the power failure

occurs, the CONTROL LOCK keypad will

remain set after a power failure.

The Control Lock is preset unlocked, but can

be locked.

To Lock or Unlock Control:

1. Check that the oven is off.

2. Select the CONTROL LOCK keypad.

3. “CONTROL LOCK” will display.

4. Scroll up to unlock.

No keypads will function with the controls

locked. The cooktop functions are not

affected by the oven control lockout.

Preferences

Times and Dates

Set time and date preferences.

NOTE: If user is connected to Wi-Fi, time and date will be set

automatically.

■ Your Meal Times: Adjust when breakfast/lunch/dinner

is shown

■ Time

■ Date

■ Time Format (AM/PM vs 24 Hour [Military Time])

Sound Volume

Set sound volume preferences.

■ Timers and Alerts

■ Buttons and Effects

Display Settings

Set the screen brightness.

■ Display Brightness

Regional

Set regional preferences.

■ Language: English, Spanish, or French

■ Temperature Units: Fahrenheit and Celsius

Wi-Fi

■ Connect to Network: Download the Whirlpool

app from the

app store on your mobile phone. See the Connectivity Setup

sheet for more detailed instructions.

■ SAID Code: The SAID code is used to sync a smart

device with your appliance. Enter the SAID code in the

Whirlpool

app.

■ MAC Address: MAC Address is displayed for the Wi-Fi

module.

■ Wi-Fi Radio: Turn Wi-Fi on or off.

Info

■ Service and Support: Displays model number, Customer

Support contact info, and Diagnostics.

■ Store Demo Mode: Select STORE DEMO MODE to toggle

Demo Mode off and on.

To Start Demo Mode:

1. Select the Tools keypad.

2. Scroll and select INFO.

3. Select STORE DEMO MODE and select ON.

NOTE: The display screen will show the time (default screen/

standby mode).

4. Select the Tools keypad.

5. Select TRY THE PRODUCT or VIEW PRODUCT VIDEOS.

If the unit is in Demo Mode after power up, follow these steps to

exit the Demo Mode.

To Exit Demo Mode:

1. Select TRY THE PRODUCT.

2. Scroll and select EXPLORE.

3. Select the Tools keypad.

4. Scroll and select INFO.

5. Select STORE DEMO MODE and select OFF.

6. Select YES on the conﬁrmation screen.

■ Restore Factory: This will restore your product to the original

factory default settings.

■ Wi-Fi Terms and Conditions: www.whirlpool.com/connect.

■ Software Terms and Conditions.

More Modes

Sabbath Mode

For guidance on usage and a complete list of models with

Sabbath Mode, visit www.star-k.org.

The Sabbath Mode sets the oven to remain on in a bake setting

until disabled.

When the Sabbath Mode is activated, only the Bake cycle will

operate. All other cooking and cleaning cycles are disabled. No

tones will sound, and the displays will not indicate temperature

changes. When the oven door is opened or closed, the oven light

will not turn on or off, and the heating elements will not turn on or

off immediately.

If a cook timer is set, the countdown will appear. Countdown will

begin once the timer is set.

NOTE: If a power failure happens while Sabbath Mode is running,

the oven will show Sabbath Mode is on, but the Bake cycle will

not be on. If the oven door is opened during this time, the oven

light will not turn on.

To Enable and Activate Sabbath Mode:

1. Press the Tools keypad.

2. Select MORE MODES.

3. Select SABBATH MODE.

4. Press SABBATH MODE again to enable Sabbath Mode

(Sabbath Mode is preset to Off).

5. Select YES if you would like to have your oven on and baking

during the Sabbath.

6. Enter the desired temperature.

(Optional) For timed cooking in Sabbath Mode, press ADD

A COOK TIME for the selected oven, Enter the desired cook

time and then press NEXT.

7. Select START.

To Disable and Exit Sabbath Mode:

1. Press the Oven Cancel keypad.

2. Press and hold the display screen for three seconds.

To Adjust Temperature:

1. Press the +/- 25 on the display screen to select the new

temperature.

NOTE: The temperature adjustment will not appear on the

display, and no tones will sound.

Temperature Calibration

IMPORTANT: Do not use a thermometer to measure the oven

temperature. Elements will cycle on and off as needed to

maintain a consistent temperature but may run slightly hot or cool

at any point in time due to this cycling. Opening the oven door

will affect cycling of the elements and impact the temperature.

The oven provides accurate temperatures and has been

thoroughly tested at the factory. However, it may cook faster

or slower than your previous oven, causing baking or browning

differences. If necessary, the temperature calibration can be

adjusted in either Fahrenheit or Celsius.

A minus sign means the oven will be cooler by the displayed

amount. The absence of a minus sign means the oven will be

warmer by the displayed amount.

Adjust the oven temp up to (+,-) 30° (-18°C). It is recommended

to make changes in 5°F (3°C) increments until desired results are

achieved.

NOTE: The oven display will continue to show the original

set temperature and will not reﬂect the calibration offset. For

example, if set to 350° (177°C) and calibrated to -20, the display

will continue to show 350° (177°C).

To Adjust Oven Temperature Calibration:

1. Press the Tools keypad.

2. Select MORE MODES.

3. Select TEMPERATURE CALIBRATION.

4. Scroll from left to right to increase or decrease the

temperature.

COOKTOP

The control knobs can be set to anywhere between HI and LO.

Push in and turn to setting.

Ceramic Glass (on some models)

The surface cooking area may glow red when an element is on.

Some parts of the surface cooking area may not glow red when

an element is on. The glow will also randomly cycle off and back

on again, even while on Hi, to keep the cooktop from extreme

temperatures. This is normal operation.

It is normal for the surface of light-colored ceramic glass to

appear to change color when surface cooking areas are hot.

As the glass cools, it will return to its original color.

Cleaning off the cooktop before and after each use will help

keep it free from stains and provide the most even heating. On

cooktops with light-colored ceramic glass, soils and stains may

be more visible, and may require more cleaning and attention.

Cooktop cleaner and a cooktop scraper are recommended.

For more information, see the “General Cleaning” section.

IMPORTANT: To avoid permanent damage to the cooktop

surface and to make soils easier to remove, clean the cooktop

after each use to remove all soils.

■ Avoid storing jars or cans above the cooktop. Dropping

a heavy or hard object onto the cooktop could crack

the cooktop.

■ To avoid damage to the cooktop, do not leave a hot lid on

the cooktop. As the cooktop cools, air can become trapped

between the lid and the cooktop and the ceramic glass

could break when the lid is removed.

■ For foods containing sugar in any form, clean up all spills

and soils as soon as possible. Allow the cooktop to cool

down slightly. Then, while wearing oven mitts, remove the

spills using a scraper while the surface is still warm. If sugary

spills are allowed to cool down, they can adhere to the

cooktop and can cause pitting and permanent marks.

■ To avoid scratches, do not slide cookware or bakeware

across the cooktop. Aluminum or copper bottoms and rough

ﬁnishes on cookware or bakeware could leave scratches or

marks on the cooktop.

■ Do not cook popcorn in prepackaged aluminum containers

on the cooktop. They could leave aluminum marks that

cannot be removed completely.

■ To avoid damage to the cooktop, do not allow objects that

could melt, such as plastic or aluminum foil, to touch any

part of the entire cooktop.

■ To avoid damage to the cooktop, do not use the cooktop

as a cutting board.

■ Use cookware about the same size as the surface cooking

area. Cookware should not extend more than 1/2" (13 mm)

outside the area.

■ Use ﬂat-bottomed cookware for best heat conduction and

energy efﬁciency. Cookware with rounded, warped, ribbed,

or dented bottoms could cause uneven heating and poor

cooking results.

■ Determine ﬂatness by placing the straight edge of a ruler

across the bottom of the cookware. While you rotate the

ruler, no space or light should be visible between it and

the cookware.

■ Cookware designed with slightly indented bottoms or small

expansion channels can be used.

■ Make sure the bottoms of pots and pans are clean and dry

before using them. Residue and water can leave deposits

when heated.

■ To avoid damage to the cooktop, do not cook foods directly

on the cooktop.

Coil Elements and Burner Bowls (on some models)

Coil elements should be level for optimal cooking results. Burner

bowls, when clean, reﬂect heat back to the cooktop. They also

help catch spills.

Cookware should not extend more than 1/2" (13 mm) over the

coil element. If cookware is uneven or too large, it can produce

excess heat, causing the burner bowl to change color.

Cooktop On Indicator Light

The Cooktop On indicator light is located on the console panel.

When any control knob on the console panel is turned on, the

Cooktop On indicator light will glow.

WARNING

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

OFF

REMEMBER: When range is in use, the entire cooktop area

may become hot.

A. Surface cooking area

B. Cookware/canner

C. 1/2" (13 mm) maximum overhang

Hot Surface Indicator Light

On ceramic glass models, the Hot Surface indicator light

is located on the console panel.

The Hot Surface indicator light will glow as long as any surface

cooking area is too hot to touch, even after the surface cooking

area is turned off.

Triple Zone Cooking Element

The Triple Zone cooking element offers ﬂexibility depending on

the size of the cookware. Single size can be used in the same

way as a regular element. The dual and triple sizes combine the

single, dual, and outer elements and is recommended for larger

cookware, larger quantities of food, and home canning.

Dual Zone Cooking Element (on some models)

The Dual Zone cooking element offers ﬂexibility depending on the

size of the cookware. Single size can be used in the same way as

a regular element. The dual size combines both the single and

outer element and is recommended for larger size cookware.

Rapid Boil Element (right front element)

The Rapid Boil cooking element offers additional cooking

ﬂexibility. The Rapid Boil cooking element can be used to boil

liquids faster. The lowest melt setting can be used to prepare

sauces, to brown or saute foods, and to keep foods at a low

temperature. Use cookware appropriate in size for the Rapid

Boil cooking element.

Melt Element

The Melt cooking element offers ﬂexibility due to a wide range

of settings between High and Melt. The High heat option can be

used to boil small amounts of liquid quickly. To reduce the power

setting, turn the knob clockwise. The Melt setting is designed

for delicate foods that require low heat, such as when melting

chocolate or holding sauces. Use cookware appropriate in

size for the Melt cooking element.

Warm Zone Element

Use the Cooktop Warm Zone element to keep cooked foods

warm. One hour is the recommended maximum time to maintain

food quality.

Do not use it to heat cold foods.

The Warm Zone element can be used alone or when any of the

other surface cooking areas are being used.

The Warm Zone element area will not glow red when cycling on.

However, the Cooktop On indicator light will be displayed when

the Warm Zone is in use.

■ Use only cookware recommended for oven and cooktop use.

■ Cover all foods with a lid or aluminum foil. When warming

baked goods, allow a small opening in the cover for moisture

to escape.

■ To avoid damage to the cooktop, do not use plastic wrap to

cover food because the plastic wrap may melt.

■ Use pot holders or oven mitts to remove food.

To use:

To turn on, turn knob to the On position.

To turn off, turn knob to the Off position.

Off

Hi Lo

SingleTriple

Hi Lo

Double

Off

Hi Lo

Single

Double

OFF

Melt

Max

OFF

Melt

Max

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

OFF

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element, or surface burner.

Ideal cookware should have a ﬂat bottom, straight sides, and a

well-ﬁtting lid, and the material should be of medium-to-heavy

thickness.

Rough ﬁnishes may scratch the cooktop or coils. Aluminum

and copper may be used as a core or base in cookware.

However, when used as a base, they can leave permanent

marks on the surfaces.

Cookware material is a factor in how quickly and evenly heat

is transferred which affects cooking results. A nonstick ﬁnish

has the same characteristics as its base material. For example,

aluminum cookware with a nonstick ﬁnish will take on the

properties of aluminum.

Cookware with nonstick surfaces should not be used under

the broiler.

Check for ﬂatness by placing the straight edge of a ruler across

the bottom of the cookware. While you rotate the ruler, no space

or light should be visible between it and the cookware.

Use the following chart as a guide for cookware material

characteristics.

Cookware Characteristics

Copper

■ Heats very quickly and evenly.

■ May leave copper residues which may

be diminished if cleaned immediately

after cooking.

■ Can leave a permanent stain or bond

to the cooktop if overheated.

Earthenware

■ Follow manufacturer’s instructions.

■ Use on low heat settings.

■ May scratch the cooktop.

Porcelain

enamel-on-steel

or cast iron

■ See stainless steel or cast iron.

■ Porcelain enamel bakeware without the

metal base may bond to the cooktop if

overheated.

Stainless steel

■ Heats quickly, but unevenly.

■ A core or base of aluminum or copper

on stainless steel provides even

heating.

Cookware Characteristics

Aluminum

■ Heats quickly and evenly.

■ Suitable for all types of cooking

■ Medium or heavy thickness is best

for most cooking tasks.

■ May leave aluminum residues

which may be diminished if cleaned

immediately after cooking.

Cast iron

■ Heats slowly and evenly.

■ Good for browning and frying

■ Maintains heat for slow cooking.

■ Rough edges or burrs may scratch

the cooktop.

Ceramic or

ceramic glass

■ Follow manufacturer’s instructions.

■ Heats slowly, but unevenly.

■ Ideal results on low-to-medium heat

settings

■ May scratch the cooktop.

Use ﬂat-bottomed cookware for best cooking results and energy

efﬁciency. The cookware should be about the same size as

the cooking area outlined on the cooktop or the coil element.

Cookware should not extend more than 1/2" (13 mm) beyond

the surface cooking area or element.

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

2 0

Home Canning

Canning can be performed on a glass smoothtop cooking

surface or traditional coil element cooktop. When canning for

long periods, alternate the use of surface cooking areas or

elements between batches. This allows time for the most recently

used areas to cool.

■ Center the canner on the largest surface cooking area or

element. On electric cooktops, canners should not extend

more than 1/2" (13 mm) beyond the surface cooking area or

element.

■ Do not place canner on two surface cooking areas or

elements at the same time.

■ On ceramic glass models, use only ﬂat-bottomed canners

to avoid damage to the cooktop and elements.

■ For more information, contact your local agricultural

extension ofﬁce or refer to published home canning guides.

Companies that manufacture home canning products can

also offer assistance.

OVEN USE

Odors and smoke are normal when the oven is used the ﬁrst

few times or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive

to the fumes given off by the oven. Exposure to the fumes may

result in death to certain birds. Always move birds to another

closed and well-ventilated room.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

ﬁnish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain

ﬁnish, do not place food or bakeware directly on the oven door

or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5 cm) of space around bakeware and oven walls. Make sure

that no bakeware piece is directly over another.

Racks

■ Position racks before turning on the oven.

■ Do not position racks with bakeware on them.

■ Make sure racks are level.

To position a rack, pull it out to the stop position, raise the front

edge, and then lift out. Use the following illustration and charts

as a guide.

The oven has 7 positions for a ﬂat rack, as shown in the previous

illustration and the following table.

Flat Rack Position* Type of Food

7 Broiling/searing meats,

hamburgers, steaks

6 Broiled meats, poultry, ﬁsh

3 or 4 Most baked goods, casseroles,

frozen foods

2 Roasted meats

1 Large roasts or poultry

For hamburger patties to have a well-seared exterior and a rare

interior, use a ﬂat rack in rack position 7. Preheat the oven for

2 minutes. Side 1 should cook for approximately 2

to 3

minutes. Side 2 should cook for approximately 4 to 5 minutes.

Expect a moderate degree of smoke when broiling.

* If your model has a Max Capacity Oven Rack, the recessed

ends must be placed in the rack position above the desired

position of the food. See the following illustration.

IMPORTANT: These rack positions are for ﬂat racks. If a Max

Capacity Oven Rack is used, the rack position must be adjusted

as shown in the previous ﬁgure.

Multiple Rack Cooking

Two-rack (non-convection): Use rack positions 2 and 5 or 3

and 6.

Two-rack (convection): Use rack positions 2 and 5 or 3 and 6.

Three-rack (convection): Use rack positions 2 and 7 and a Max

Capacity Oven Rack in rack position 5.

Baking Cookies and Layer Cakes on Two Racks

Baking Layer Cakes

For best results when baking cakes on two racks, use the Bake

function, a ﬂat rack in rack position 5, and a ﬂat rack in rack

position 2. If you do not have two ﬂat racks, use a Max Capacity

Oven Rack in rack position 6. Place the cakes on the racks as

shown. Keep at least 3" (7.6 cm) of space between the front of

the racks and the front cakes.

Baking Cookies

For best results when baking cookies on two racks, use

the Convection Bake function, a ﬂat rack in rack position 5,

and a ﬂat rack in rack position 2.

If you do not have two ﬂat racks, use a ﬂat rack in rack position

2 and a Max Capacity Oven Rack in rack position 6.

If you do not have Convection Bake, use the standard

Bake function.

Oven Vent

The oven vent releases hot air and moisture from the oven

and should not be blocked or covered. Blocking or covering the

oven vent will cause poor air circulation, affecting cooking and

cleaning results. Do not set plastics, paper, or other items that

could melt or burn near the oven vent.

Baking and Roasting

Preheating

When beginning a Bake, or Convect Bake cycle, the oven

will begin preheating after Start is pressed. The oven will take

approximately 12 to 15 minutes to reach 350°F (177°C) with all

of the oven racks provided with your oven inside the oven cavity.

Higher temperatures will take longer to preheat. The preheat

cycle rapidly increases the oven temperature. The actual oven

temperature will go above your set temperature to offset the heat

lost when your oven door is opened to insert food. This ensures

that when you place your food in the oven, the oven will begin at

the proper temperature. Insert your food when the preheat tone

sounds. Do not open the door during preheat before the tone

sounds.

Rapid Preheat

Rapid Preheat can be used to shorten the preheating time. Only

one standard ﬂat oven rack should be in the oven during Rapid

Preheat. Extra racks should be removed prior to starting. The

preheating cycle should be completed before placing food in the

oven. When the Rapid Preheat cycle is complete, the oven starts

a normal Bake cycle.

IMPORTANT: Rapid Preheat should be used only for one-rack

baking.

Oven Temperature

While in use, the oven elements will cycle on and off as needed

to maintain a consistent temperature, but they may run slightly

hot or cool at any point in time due to this cycling. Opening the

oven door while in use will release the hot air and cool the oven

which could impact the cooking time and performance. It is

recommended to use the oven light to monitor cooking progress.

NOTE: On models with convection, the convection fan may run

in the non-convection Bake mode to improve oven performance.

Temperature Management System

The temperature management system electronically regulates the

oven heat levels during preheat and Bake to maintain a precise

temperature range for optimal cooking results. The bake and broil

elements or burners cycle on and off in intervals. On convection

range models, the fan will run while preheating and may be

cycled on and off for short intervals during Bake to provide the

best results. This feature is automatically activated when the oven

is in use.

Before baking and roasting, position racks according to the

“Positioning Racks and Bakeware” section. When roasting, it is

not necessary to wait for the oven preheat cycle to end before

putting food in, unless it is recommended in the recipe.

A. Ends of rack in position 3

B. Food in position 2

A. Oven vent

Frozen Bake™

Frozen Bake™ Technology automatically adjusts the

manufacturer’s bake time by combining preheating and baking,

to deliver great packaged frozen food results without the wait.

There are six programmed food options to choose from: Pizza,

Lasagna, Nuggets, Fries, Pie and Meal. The Frozen Bake™

cycles have been customized to work only with these foods.

When using Frozen Bake™ Technology, it is important that

you follow all manufacturer’s instructions including venting,

covering, stirring or placing on a baking sheet to ensure a good

result. When cooking frozen meals, only cook items that provide

instructions for cooking in a conventional oven. Place your dish

in the center of the rack and select one of the rack positions

recommended for Frozen Bake™ in the “Positioning Racks and

Bakeware” section and bake only one package or pan at a time.

Use the temperature and maximum bake time from the package.

A tone will alert you to check the food for doneness before the

cook time is complete and again at the end of the cook time. The

display will prompt you to add additional cook time if desired.

Broiling

When broiling, preheat the oven for 2 minutes before putting

food in, unless recommended otherwise in the recipe. Position

food on grid in a broiler pan, and then place it in the center of

the oven rack.

IMPORTANT: Close the door to ensure proper broiling

temperature.

Changing the temperature when broiling allows more precise

control when cooking. The lower the broil setting is, the slower

the cooking. Thicker cuts and unevenly shaped pieces of meat,

ﬁsh and poultry may cook better at lower broil settings. Use rack

6 or 7 for broiling. Refer to the “Positioning Racks and Bakeware”

section for more information.

On lower settings, the broil element will cycle on and off to

maintain the proper temperature.

■ For best results, use a broiler pan and grid. It is designed

to drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be

ordered. See the “Accessories” section.

Convection Cooking

In a convection oven, the fan-circulated hot air continually

distributes heat more evenly than the natural movement of air

in a standard thermal oven. This movement of hot air helps

maintain a consistent temperature throughout the oven, cooking

foods more evenly, crisping surfaces while sealing in moisture,

and yielding crustier breads.

During convection baking or roasting, the bake, broil, and

convection elements cycle on and off in intervals while the fan

circulates the hot air. During convection broiling, the broil and

convection elements cycle on and off.

If the oven door is opened during convection cooking, the fan

will turn off immediately. It will come back on when the oven

door is closed.

With convection cooking, most foods can be cooked at a lower

temperature and/or a shorter cooking time than in a standard

thermal oven. Use the following chart as a guide.

Convection Mode Time/Temp. Guidelines

Convection Bake 25°F (15°C) lower temperature;

possible shortened cooking time

Convection Roast Cooking time shortened by up to 30%

Convection Broil Shortened cooking time

Convect Options

Convect Bake: multiple-rack baking or cookies, biscuits, breads,

casseroles, tarts, tortes, cakes

Convect Roast: whole chicken or turkey, vegetables, pork roasts,

beef roasts

Convect Broil: thicker cuts or unevenly shaped pieces of meat,

ﬁsh, or poultry

Oven Light

The oven light is a standard 40-watt appliance bulb. Before

replacing, make sure the oven and cooktop are cool and the

control knobs are in the Off position.

To Replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb by turning clockwise.

5. Replace bulb cover by turning clockwise.

6. Plug in range or reconnect power.

RANGE CARE

Clean Cycle

AquaLift

Technology is an innovative cleaning solution that

utilizes heat and water to release baked-on spills from the oven

in less than 1 hour. This new cleaning technology is a low-heat,

odor-free alternative to traditional self-cleaning options.

Allow the oven to cool to room temperature before using the

Clean cycle. If your oven cavity is above 200°F (93°C), “Oven

Cooling” will appear in the display, and the Clean cycle will

not be activated until the oven cavity cools down.

To Clean:

1. Remove all racks and accessories from the oven cavity,

and wipe excess soil. Use a plastic scraper to remove

easily removed soils.

2. Pour 2 cups (16 oz [500 mL]) of distilled or ﬁltered water onto

the bottom of the empty oven, and close the oven door.

IMPORTANT: Do not use chemicals or other additives with

the water. Do not open the oven door during the Clean cycle.

The water on the oven bottom is hot.

3. Press AQUALIFT SELF CLEAN and then START on the oven

control panel.

NOTE: Do not start Self Clean before the oven has cooled

down.

4. Allow 40 minutes for cleaning and cooldown. A beep will

sound when the Clean cycle is complete.

5. Press CANCEL at the end of the cycle. Cancel may be

pressed at any time to stop the Clean cycle.

6. Remove the residual water and loosened soils with a sponge

or cloth immediately after the Clean cycle is complete. Much

of the initial 2 cups (16 oz [500 mL]) of water will remain in the

oven after the cycle is completed. If additional soils remain,

leave a small amount of water in the oven bottom to assist

with the cleaning.

7. If any soils remain, remove them with a nonscratch scrubbing

sponge or plastic scraper. Additional Clean cycles may be run

to help remove the stubborn soils.

IMPORTANT: Do not use oven cleaners. The use of chemicals,

including commercial oven cleaners or metal scouring pads,

may cause permanent damage to the porcelain surface of the

oven interior.

NOTES:

■ The range should be level to ensure that the entire surface

of the bottom of the oven cavity is covered by water at the

beginning of the Clean cycle.

■ For best results, use distilled or ﬁltered water. Tap water

may leave mineral deposits on the oven bottom.

■ Before removing the residual water and loosened soils at the

end of the Clean cycle, insert a cloth or paper towel between

the lower edge of the oven door and the front frame to keep

water from spilling onto the front of the range and the ﬂoor.

■ Soil baked on through several cooking cycles will be more

difﬁcult to remove with the Clean cycle.

■ Nonabrasive scrub sponges or eraser-style cleaning pads

(without cleaners) can be effective for cleaning the oven

cavity walls, oven door, and oven bottom for difﬁcult soils.

For best results, moisten the pads and sponges before use.

■ Run an additional Clean cycle for stubborn soils.

■ Affresh

Kitchen Appliance Cleaner and affresh

Cooktop

Cleaner may be used to clean the oven bottom, walls, and

door when the oven has ﬁnished the cycle and returned to

room temperature. If affresh

Cooktop Cleaner is used, it

is recommended to wipe out the cavity with distilled water

as well. Refer to the “Accessories” section for information

on ordering.

■ Additional AquaLift

Technology Cleaning Kits may be

obtained by ordering Part Number W10423113RP. See

the “Accessories” section for more information.

■ For assistance with AquaLift

Technology, call 1-877-258-

0808 in the U.S.A. or 1-800-807-6777 in Canada, or visit our

website at http://whirlpoolcorp.com/aqualift.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Always follow label instructions

on cleaning products. For additional information, you can visit our

website at www.whirlpool.com. In Canada, visit our website at

www.whirlpool.ca.

Soap, water, and a soft cloth or sponge are suggested ﬁrst unless

otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES

(on some models)

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire range is cool. These spills may

affect the ﬁnish.

Cleaning Method:

■ Glass cleaner, mild liquid cleaner or nonabrasive

scrubbing pad:

Gently clean around the model/serial/rating plate

because scrubbing may remove numbers.

■ Affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-ﬁlled scouring pads, abrasive cleaners, cooktop cleaner,

steel-wool pads, gritty washcloths, or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-

time or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

■ Affresh

Stainless Steel Cleaner Part Number W10355016

(not included):

See the “Accessories” section for more information.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust

removers, ammonia, or sodium hydroxide (lye) because the

paint surface may stain.

CERAMIC GLASS

Cleaning Method:

To avoid damaging the cooktop, do not use steel wool, abrasive

powder cleansers, chlorine bleach, rust remover, or ammonia.

1. Remove food/residue with the Cooktop Scraper.

■ For best results, use the Cooktop Scraper while the

cooktop is still warm but not hot to the touch. It is

recommended to wear an oven mitt while scraping

the warm cooktop.

■ Hold the Cooktop Scraper at approximately a 45° angle

against the glass surface and scrape the residue. It will

be necessary to apply pressure in order to remove the

residue.

Allow the cooktop to cool down completely before

proceeding to Step 2.

2. Apply a few dime-sized drops of Cooktop Cleaner to the

affected areas.

■ Rub Cooktop Cleaner onto the cooktop surface with the

blue Cooktop Cleaning Pad. Some pressure is needed to

remove stubborn stains.

■ Allow the cleaner to dry to a white haze before

proceeding to Step 3.

3. Polish with a clean, dry cloth or a clean, dry paper towel.

■ Repeat steps 1 through 3 as necessary for stubborn

or burned-on stains.

The Complete Cooktop Cleaner Kit is available for order and

includes the following:

■ Cooktop Scraper

■ Cooktop Cleaner

■ Blue Cooktop Cleaning Pads

See the “Accessories” section for part numbers and information

on ordering.

COIL ELEMENTS (on some models)

Cleaning Method:

■ Damp cloth:

Make sure control knobs are off and elements are cool.

Do not clean or immerse in water. Soil will burn off when hot.

BURNER BOWLS (on some models)

Before removing or replacing coil elements and burner bowls,

make sure they are cool and the control knobs are in the Off

position.

Remove the coil element by pushing the edge of the coil element

toward the receptacle. Lift it enough to clear the burner bowl. Pull

the coil element straight away from the receptacle to remove. Lift

out the burner bowl.

Cleaning Method:

Chrome burner bowls

Wash frequently in warm, soapy water. It is not recommended to

wash chrome bowls in a dishwasher. A mild abrasive cleaner and

a plastic scrubber can be used to remove stubborn stains.

For heavily soiled bowls, place an ammonia soaked paper towel

on the stains and allow to soak for a short time, then gently scrub

with a plastic scrubber.

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool,

abrasive cleansers, or oven cleaner.

To avoid damage, do not soak knobs. When replacing knobs,

make sure knobs are in the Off position.

On some models, do not remove seals under knobs.

Cleaning Method:

■ Soap and water:

Pull knobs straight away from control panel to remove.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive

cleaners, steel-wool pads, gritty washcloths, or abrasive

paper towels.

Cleaning Method:

■ Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly

on panel.

■ Affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

OVEN RACKS

Cleaning Method:

■ Steel-wool pad

■ For racks that have discolored and are harder to slide,

a light coating of vegetable oil applied to the rack guides

will help them slide.

STORAGE DRAWER OR WARMING DRAWER

(on some models)

Check that storage drawer or warming drawer is cool and empty

before cleaning.

Cleaning Method:

■ Mild detergent

OVEN CAVITY

Use AquaLift

Technology regularly to clean oven spills.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At

high temperatures, foods react with porcelain. Staining,

etching, pitting, or faint white spots can result.

Cleaning Method:

Clean cycle:

See the “Clean Cycle” section.

TROUBLESHOOTING

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid

a service call, refer to the warranty page in this manual or visit producthelp.www.whirlpool.com. In Canada, visit www.whirlpool.ca.

In the U.S.A.:

Whirlpool Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

In Canada:

Whirlpool Brand Home Appliances

Customer eXperience Centre

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

Problem Possible Causes and/or Solutions

Nothing will operate

Power supply cord is unplugged: Plug into a grounded outlet.

Household fuse is blown or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker.

If the problem continues, call an electrician.

The control displays an F9 or F9 E0 error code: The electrical outlet in the home may be miswired.

Contact a qualiﬁed electrician to verify the electrical supply.

Cooktop will not

operate

The control knob is not set correctly: Push in knob before turning to a setting.

On ceramic glass models, the oven control lockout is set: See “Control Lock” in the “Feature Guide”

section.

Excessive heat

around cookware

on cooktop

Cookware is not the proper size: Use cookware about the same size as the surface cooking area, element,

or surface burner. Cookware should not extend more than 1/2" (13 mm) outside the cooking area.

Cooktop cooking

results not

what expected

Control knob set to incorrect heat level: See the “Cooktop” section.

Range is not level: Level the range. See the Installation Instructions.

Cooktop element

cycles on and off

on High setting

Element cycling due to a temperature limiter: This is normal operation. The element may cycle on and off

to keep the cooktop from overheating.

Oven will not operate

Delay Start is set: See the “Cook Time” section.

Control is locked: See “Control Lock” in the “Tools” section.

The range is in Demo Mode: Demo Mode will deactivate all oven elements. See “Info” in the “Tools”

section.

Electronic oven control set incorrectly: See the “Tools” and “More Modes” sections.

Oven temperature

too high or too low

Oven temperature needs adjustment: See “Temperature Calibration” in the “More Modes” section.

Oven indicator

lights ﬂash

Power to range is turned on or restored: See the “Tools” and “More Modes” sections. If the indicator

lights keep ﬂashing, call for service.

Display shows

messages

Power failure: On some models, reset the clock, if needed. See “Preferences” in the “Tools” section.

Error code (Display shows letter followed by number.): Depending on your model, press the Cancel

keypad to clear the display. See the “Tools” and “More Modes” sections. If it reappears, call for service.

Range is in Sabbath mode (display shows “Sabbath Mode”): See the “Sabbath Mode” section to exit

Sabbath mode.

Demo Mode (product is in Demo Mode): See the “Tools” section to exit Demo Mode.

Clean cycle did not

work on all spills

Several cooking cycles between Clean cycles or spills on oven walls and doors: Run additional

Clean cycles. Use the AquaLift

Technology Cleaning Kit. See the “Clean Cycle” section for more

information.

Mineral deposits

are left on the oven

bottom after the

Clean cycle

Tap water was used in the Clean cycle: Use distilled or ﬁltered water in the Clean cycle.

To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to thoroughly

remove any vinegar residue.

Range is not level: Mineral deposits will collect on dry areas of the oven bottom during the Clean cycle.

Level the range. See the Installation Instructions.

To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to thoroughly

remove any vinegar residue.

La page charge ...

Whirlpool WEE750H0HV Le manuel du propriétaire

Marque: Whirlpool

Modèle: WEE750H0HV

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Whirlpool WEE750H0HV Owner's manual
español: Whirlpool WEE750H0HV El manual del propietario

Whirlpool WEE750H0HV Le manuel du propriétaire

Ce manuel convient également à

Whirlpool WEE750H0HV Le manuel du propriétaire

dans d''autres langues

Documents connexes