N-Tron 316TX Manuel utilisateur

316TX
N-Tron
Marque
N-Tron
Modèle
316TX
Catégorie
Commutateurs réseau
Taper
Manuel utilisateur

Ce manuel convient également à

N-Tron
®
Series
308FX2, 309FX, 316TX, 317FX
Industrial Ethernet Switches
User Guide | December 2015
COPYRIGHT
Copyright, © 2015 Red Lion Controls, Inc.
20 Willow Springs Circle
York, PA 17406
All rights reserved. Red Lion, the Red Lion logo and N-Tron are registered trademarks of Red Lion Controls,
Inc. All other company and product names are trademarks of their respective owners.
CONTACT INFORMATION:
AMERICAS
York, PA: +1 (717) 767-6511
Mobile, AL: +1 (251) 342-2164
Ballston Lake, NY: +1 (518) 877-5173
Hours: 8am-6pm Eastern Standard Time
(UTC/GMT -5 hours)
ASIA-PACIFIC
Shanghai, P.R. China: +86 21-6113-3688 x767
Hours: 10am-6pm China Standard Time
(UTC/GMT +8 hours)
EUROPE
The Netherlands: +31 33-4723-225
Hours: 9am-6pm Central European Time
(UTC/GMT +1 hour)
Website: www.redlion.net
Email: [email protected]
N-Tron® Series 300 TX/FX Models User Guide i
Table of Contents Revised 2015-12-04
Preface ................................ .. .................................. ........................ iii
Disclaimer ...................................................................................... iii
ComplianceInformation ................................... ..................................... iii
Part15oftheFederalCommunicationsCommission(FCC)‐ARules:Interference ........ iii
IndustryCanada ............... .................. ........................................ iii
EnvironmentalImpactStatement ................................................. ....... iv
ToxicEmissions ........... ............................................................... iv
TrademarkAcknowledgments ................................................................... iv
Applicable300TX/FXModelsIndustrialEthernetSwitches .......................................v
ReleaseNotesandDocumentUpdates ........................................... ............... vi
PublicationHistory .................... .................. ................................ vi
RelatedDocuments ............... .................. ..................................... vi
DocumentComments .................... .. ............................................. vi
AdditionalProductInformation .................................. ............................... vi
WarningsandCautions/Avertissementsetmisesengarde ..................... ................ vi
GeneralSafetyCautionsandWarnings/Précautionsetavertissements
desécuritégénérale ............... .................. ............................... . vi
ElectricalSafetyWarnings/Avertissementsdesécuritéélectrique ..................... ..vii
EnvironmentalSafetyCautionsandWarnings/Sécuritéenvironnementale
misesengardeetavertissements ..................................... .............. viii
UL/cULHazardousLocationWarning/UL/cULAvertissementd'emplacement
dangereux ....................................... .................................. . viii
LaserSafetyWarning/Consignesdesécuritérelativesaulaser .......................... ix
Section 1
IntroductionandSpecifications ........................ .................. ...............1‐1
Introduction ...................................................................................1‐1
308FX2and308FXE2 ..... .................. ............................................1‐1
316TX ............................................ .................................. ....1‐1
309FXand317FX ............................ .................. .................. .......1‐1
309FXEand317FXE ................. .................. .................................1‐1
KeyFeatures ..................................................................... ..............1‐2
KeySpecifications ........ .................. ................................................. ...1‐3
RegulatoryApprovals ................................... .......................................1‐7
Safety ............................... .................. .................. ...............1‐7
EMI ................. .................. .. ...............................................1‐7
EMS ................ ................................................................. .. .1‐7
ConductedLowFrequency:IEC60533 ............................... ....................1‐7
Shock:IEEE1613(250mm) .............................................................1‐7
Vibration ................................. .................................. ............1‐7
Cold:IEC60068‐2‐1 .......................... .................. .. .......................1‐7
DryHeat:IEC60068‐2‐2 ...................... ...........................................1‐7
DampHeat:IEC60068‐2‐30(TestD
b
) ....................................................1‐7
Certifications ...... ................................. .................................. .........1‐8
Table of Contents Revised 2015-12-04
ii N-Tron® Series 300 TX/FX Models User Guide
Section 2 Installation .......................................................................... ....2‐9
Introduction ...................................................................................2‐9
Unpacking ................................. ................................................. ...2‐9
Inspection .................... .................................................................2‐9
Installing/Mounting ............................................................................2‐9
ATEXInstallationRequirements .................................. ......................2‐10
DIN‐RailMounting ....................................................................2‐11
PanelandRackMounting.............................................................2‐11
Connections ................................................ ..................................2‐12
PowerConnection(SideView) .................................... .....................2‐12
300TX/FXModelsGroundingTechniques ................................... ..........2‐13
RJ45ConnectorCrimpSpecifications .................... ..............................2‐14
ConnectingtheUnit .............................................. .............................2‐14
SerialInterface ...................................................................... ..2‐15
SerialCable...........................................................................2‐15
HyperTerminal ................ .................. ............................... .......2‐15
Section 3
OperationandMaintenance ..................... ......................................3‐17
Introduction ..................................................................................3‐17
300TX/FXModelsPortsandIndicators ........................................... .. ...........3‐17
300TX/FXModelsLED’sandOperatingModes ................................................3‐18
SoftwareConfiguration ....... .............................................................. ..3‐18
CommandLineInterpreter(CLI) .................................................. .....3‐18
LoggingIn(passwordprotection) ............................................ ..........3‐19
CLINavigation .......... ................................. .................................. ...3‐20
CLIMenuTree .................... .................. ...................................3‐20
CLIMenusandCommands ............... .................. ...........................3‐20
HomeMenu .............................................. .............................3‐21
HomeMenuInfoCommand ............................. ..............................3‐21
SystemMenu .......... .................. ..............................................3‐21
N‐View™Menu .......................... ..............................................3‐22
SystemInfoMenu ............................... ......................................3‐23
Restore(RestoringDefaults) . .................. .................. ......................3‐23
SwitchMenu ........................................ ..................................3‐23
PortsCommands ............................................................ ..........3‐24
FiltersCommands ................................................................... ..3‐26
TroubleShooting ............................................................................ ..3‐26
Cleaning ........................................................................ ..............3‐27
Maintenance ...................................................................... ...........3‐27
N‐Tron®Series300TX/FXModelsLimitedWarranty ...........................................3‐27
N-Tron® Series 300 TX/FX Models User Guide iii
Preface Revised 2015-12-04
Preface
Disclaimer
Portions of this document are intended solely as an outline of methodologies to be followed during the
maintenance and operation of N-Tron® series 300 TX/FX equipment. It is not intended as a step-by-step guide or a
complete set of all procedures necessary and sufficient to complete all operations.
While every effort has been made to ensure that this document is complete and accurate at the time of release, the
information that it contains is subject to change. Red Lion Controls is not responsible for any additions to or
alterations of the original document. Industrial networks vary widely in their configurations, topologies, and traffic
conditions. This document is intended as a general guide only. It has not been tested for all possible applications,
and it may not be complete or accurate for some situations.
Users of this document are urged to heed warnings and cautions summarized at the front of the document, such as
electrical hazard warnings.
ComplianceInformation
It is recommended that the owner of this equipment determine and ensure conformance with any specific and
applicable local regulations.
Part15oftheFederalCommunicationsCommission(FCC)‐ARules:Interference
Every effort has been made to ensure that this equipment is designed to comply with the limits for a Class A digital
device, as described in the FCC Rules.
This product complies with Part 15 of the FCC-A Rules.
Operation is subject to the following conditions:
1. This device may not cause harmful Interference
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this device in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
IndustryCanada
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. Operation is subject to the following two conditions; (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Cet appareillage numérique de la classe A répond à toutes les exigences de l'interférence canadienne causant des
règlements d'équipement. L'opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas
causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle interférence reçue, y compris
l'interférence qui peut causer l'opération peu désirée.
Preface Revised 2015-12-04
iv N-Tron® Series 300 TX/FX Models User Guide
EnvironmentalImpactStatement
Red Lion equipment contains no hazardous materials as defined by the United States Environmental Protection
Agency (USEPA). Red Lion recommends that all failed product be returned to Red Lion for failure analysis and
proper disposal.
ToxicEmissions
Red Lion equipment releases no toxic emissions.
TrademarkAcknowledgments
Ethernet is a registered trademark of Xerox Corporation.
N-Tron® Series 300 TX/FX Models User Guide v
Preface Revised 2015-12-04
Applicable300TX/FXIndustrialEthernetSwitches
This User and Installation Guide applies to the 300 TX/FX models presented in Table 1.
Table 1.
OrderingGuide
Part Number Description
308FX2-N-XX
Eight port - six 10/100BaseTX RJ-45 ports
and two 100BaseFX multimode fiber ports
with ST or SC connectors
308FXE2-N-XX-YY
Eight port - six 10/100BaseTX RJ-45 ports and two 100BaseFX singlemode 15km, 40km
o
r 80km fiber ports with ST or SC connectors
309FX-N-XX
Nine port - eight 10/100BaseTX RJ-45 ports an
d one 100BaseFX multimode fiber port
with ST or SC connectors
309FXE-N-XX-YY
Nine port - eight 10/100BaseTX RJ-45 ports and one 100BaseFX singlemode 15km,
4
0km or 80km fiber port with ST or SC connectors
316TX-N 16 ports- 16 10/100BaseTX RJ-45 ports
317FX-N-XX
17 port - 16 10/100BaseTX RJ-45 ports and one 100BaseFX multimode port with ST or
SC connectors
317FXE-N-XX-YY
17 port - 16 10/100BaseTX RJ-45 ports and one 100BaseFX singlemode 15km, 40km or
8
0km fiber port with ST or SC connectors
Where:
N = N-View Option
E = Singlemode
XX = ST for ST style fiber connector, SC for
SC style fiber connector
YY = Segment length
15 for 15km maximum fiber segment length
40 for 40km maximum fiber segment length
80 for 80km maximum fiber segment length
308FX2 309FX 316TX 317FX
Preface Revised 2015-12-04
vi N-Tron® Series 300 TX/FX Models User Guide
ReleaseNotesandDocumentUpdates
The hard copy and electronic media versions of this document are revised only at major releases and therefore,
may not always contain the latest product information. As needed, Documentation Notes and/or Product Bulletins
will be provided between major releases to describe any new information or document changes.
The latest online version of this document and all product updates can be accessed through the Red Lion web site
at
http://www.redlion.net
PublicationHistory
The following information lists the release history of this document.
RelatedDocuments
Visit the Technical Resources page on the Red Lion website at the following link to view available documents
related to this product.
http://www.redlion.net/documentation/red-lion-documentation
DocumentComments
Red Lion appreciates all comments that will help us to improve our documentation quality. The user can submit
comments through the Red Lion Customer Service. Simply email us at customer.s[email protected].
AdditionalProductInformation
Additional product information can be obtained by contacting the local sales representative or Red Lion through the
contact numbers and/or e-mail addresses listed on the inside of the front cover.
WarningsandCautions/Avertissementsetmisesengarde
Warnings apply to situations where personal injury or death may result.
Mises en garde s'appliquent aux situations où des blessures corporelles ou la mort peuvent en résulter.
Cautions apply to where reduced function or damage to equipment may result.
Avertissements s'appliquent à où fonction réduite ou d'endommagement de l'équipement peut entraîner.
GeneralSafetyCautionsandWarnings/Précautionsetavertissementsdesécuritégénérale
Issue/Revision Release Date Content Description
Revised 2013-06-21 June 2013 Document Updates
Revised 2015-11-09 November 2015 Added safety information and reformatted document.
CAUTION: Do not perform any services on the unit unless qualified to do so. Do not substitute
unauthorized parts or make unauthorized modifications to the unit.
ATTENTION: Ne pas effectuer de services sur l'appareil s'il n'est pas qualifié pour le faire. Ne pas
substituer pièces non autorisées ou de modifications non autorisées de l'appareil.
N-Tron® Series 300 TX/FX Models User Guide vii
Preface Revised 2015-12-04
ElectricalSafetyWarnings/Avertissementsdesécuritéélectrique
WARNING - Do not operate the unit with the top cover removed, as this could create a shock or
fire hazard.
AVERTISSEMENT -
Nepasfairefonctionnerl'unitéaveclecouvercleretiré,cecipourraitcréer
unedéchargeélectriqueouunincendie.
CAUTION: Donotblockanyairventsontheunit.
ATTENTION: N'obstruezpaslesfentesd'aérationdel'unité.
CAUTION: Do not operate the equipment in a manner not specified by this manual.
ATTENTION: Ne pas faire fonctionner l'équipement d'une manière non spécifiée par ce manuel.
CAUTION: If the equipment is used in a manner not specified by Red Lion, the protection provided
by the equipment may be impaired.
ATTENTION: Si l'équipement est utilisé d'une façon non spécifiée par Red Lion, la protection
fournie par l'équipement peut être compromise.
WARNING: Do not work on equipment or cables during periods of lightning activity.
AVERTISSEMENT: Ne pas travailler sur le matériel ou les câbles pendant les périodes d'activité de
la foudre.
WARNING: Properly ground the unit before connecting anything else to the unit. Units not
properly grounded may result in a safety risk and could be hazardous and may void the warranty.
See the grounding technique section of this Hardware Guide for proper ways to ground the unit.
AVERTISSEMENT: Correctement à la terre de l'unité avant tout raccordement à l'unité. Unités pas
correctement mise à la terre peut entraîner un risque de sécurité et pourraient être dangereux et
peut annuler la garantie. Voir la section technique de mise à la terre de ce mode d'emploi des
moyens appropriés à la masse de l'appareil.
WARNING: Disconnect the power cable before removing the enclosure top.
AVERTISSEMENT: Débranchez le câble d'alimentation avant de retirer le boîtier supérieur.
Preface Revised 2015-12-04
viii N-Tron® Series 300 TX/FX Models User Guide
EnvironmentalSafetyCautionsandWarnings/Sécuritéenvironnementalemisesengardeetavertissements
UL/cULHazardousLocationWarning/UL/cULAvertissementd'emplacementdangereux
WARNING: Do not operate the unit with the top cover removed.
AVERTISSEMENT : Ne pas faire fonctionner l'unité avec le capot retiré.
CAUTION: Observe proper DC Voltage polarity when installing power input cables. Reversing volt-
age polarity can cause permanent damage to the unit and voids the warranty.
ATTENTION: Respecter la polarité correcte de tension DC lors de l'installation des câbles
d'alimentation d'entrée. Inversion de polarité de tension peut causer des dommages permanents à
l'appareil et annule la garantie.
WARNING: Disconnect the power and allow to cool 5 minutes before touching.
AVERTISSEMENT: Déconnectez le câble d'alimentation et laisser refroidir 5 minutes avant de la
toucher.
WARNING: Do not operate the equipment in the presence of flammable gases or fumes. Operating
electrical equipment in such an environment constitutes a definite safety hazard.
AVERTISSEMENT : Ne pas utiliser le matériel en présence de gaz ou de vapeurs inflammables.
L'utilisation de matériel électrique dans un tel environnement constitue un danger certain.
WARNING – Explosion Hazard – Do not connect or disconnect any connections while circuit is live
unless area is known to be non-hazardous.
AVERTISSEMENT - Risque d'explosion - Ne pas brancher ou débrancher les connexions lorsque
le circuit est sous tension sauf si la zone est connue pour être non dangereux.
WARNING: Install only in accordance with Local and National Codes of authorities having
jurisdiction.
AVERTISSEMENT: Installer uniquement, conformément aux codes locaux et nationaux des
autorités ayant compétence.
CAUTION: Power must be supplied by an isolating source, and a 3.3A max rated UL recognized
fuse must be installed immediately before the unit.
ATTENTION: celui-ci doit être alimenté par une source à isolation et un 3.3A nominale max. fusible
homologué UL doit être installé immédiatement avant l'unité.
N-Tron® Series 300 TX/FX Models User Guide ix
Preface Revised 2015-12-04
LaserSafetyWarning/Consignesdesécuritérelativesaulaser
CAUTION: Class I, Division 2 installations require that all devices connected to this product must be
UL listed for the area in which it is installed.
ATTENTION: Classe I, division 2 installations nécessitent que tous les périphériques connectés à
ce produit doit être homologué UL pour la zone dans laquelle il est installé.
CAUTION: Only UL listed wiring with temperature ratings greater than 90°C permitted for Class I,
Division 2 installations operating at temperatures up to 70°C ambient.
ATTENTION: uniquement listés UL câblage avec cotes de température supérieure à 90 °C Permis
de classe I, division 2 équipements fonctionnant à des températures allant jusqu'à 70°C de
température ambiante.
CAUTION: Limited Operating Voltage range of 12-30V for Class I, Division 2 installations.
ATTENTION: limiter la plage de tension de fonctionnement de 12-30 V pour la classe I, division 2
installations..
CAUTION: This equipment is suitable for use in Class I, Division 2, Groups A, B, C, and D or non-
hazardous locations only.
ATTENTION: Cet équipement est adapté pour une utilisation dans la classe I, Division 2, Groupes
A, B, C et D ou non dangereux endroits seulement.
CAUTION (FXE-40 and FXE-80 only): CLASS 1 LASER PRODUCT. Do not stare into the laser.
ATTENTION (FXE-40 et FXE-80 uniquement):
PRODUIT LASER CLASSE 1. Ne pas regarder
dans le laser.
Preface Revised 2015-12-04
x N-Tron® Series 300 TX/FX Models User Guide
N-Tron® Series 300 TX/FX Models User Guide 1-1
Introduction and Specifications Revised 2015-12-04
Section1 IntroductionandSpecifications
Introduction
The Red Lion N-Tron® series 308FX2/309FX/316TX/317FX Industrial Ethernet switches support high speed layer
2 switching between ports. The copper ports in this line are Category 5 compliant 10/100-BaseTX connections for
high performance network design, and hub/repeater upgrades. These copper ports are capable of auto negotiating
10/100 Mb and half/full duplex communications, or the user can configure these parameters.
The 300 series provides Fast Ethernet connectivity from 8 to 17 ports. These unmanaged switches are available in
copper and fiber port combinations for maximum deployment flexibility.They are also optionally available with
N-View™ monitoring technology, which can be found in the Red Lion monitored family of products.
308FX2and308FXE2
The 308FX2 is an affordable 8 port switch that has 6 copper ports plus two additional multimode fiber optic up-link
ports. The two fiber links are capable of 2 Kilometers of 100 Mb communications without the use of repeaters.The
308FXE2 is similar to the 308FX2, but is populated with singlemode extended range fiber optics.
316TX
The 316TX is an affordable 16 port copper port switch.
309FXand317FX
The 309FX (317FX) is a 9 (17) port switch that has 8 (16) copper ports, plus an additional multimode fiber optic up-
link port in the 309FX and in the 317FX. The fiber links are capable of 2 Kilometers of 100 Mb communications
without the use of repeaters.
309FXEand317FXE
The 309FXE (317FXE) is a 9 (17) port switch that is similar to the 309FX (317FX), but with extended range. The
FXE versions utilize a singlemode fiber transceiver that is capable of 15-80 Kilometers of 100 Mb communications
All FX, FX2, FXE, and FXE2 models utilize the IEEE compliant SC or ST duplex connector for fiber optic
communications. The 10/100Base-TX ports utilize the RJ45 shielded connector.
All N-Tron® series switches come housed in a steel ruggedized DIN-Rail enclosure, designed to withstand the
most demanding industrial applications, and have been fully tested and certified at industrial environmental
extremes. All units operate on 10-30VDC.
1-2 N-Tron® Series 300 TX/FX Models User Guide
Introduction and Specifications Revised 2015-12-04
KeyFeatures
• Full IEEE 802.3 & 100Base-FX Compliance
• Full IEEE 1613 Compliance (Communications Networking Devices in Electric Power Stations)
• American Bureau of Shipping (ABS) Type Approval (Maritime and Offshore Applications)
• Extended Environmental Specifications
• Support for Full/Half Duplex Operation
• LED Link/Activity Status Indication
• Autosensing Speed and Flow Control
• Up to 2.6 Gb/s Maximum Throughput
• Industry Standard 35mm DIN-Rail Mounted Enclosure
• Optional N-View™ Monitoring on -N units.
N-Tron® Series 300 TX/FX Models User Guide 1-3
Introduction and Specifications Revised 2015-12-04
KeySpecifications
Table 2.
Switch Properties
# of MAC Addresses Aging Time Latency Minimum Backplane Speed Switching Method
4,000 Programmable 2.2 μs 2.6 Gb/s
Store & Forward
Physical
Height Width Depth Weight DIN-Rail
5.9 in (15cm) 2.3 in (5.8cm) 3.8 in (9.7cm) 1.7 lbs (0.8kg)
35mm
Electrical
Redundant Input Volt-
age
Input Current Inrush Current Input Ripple
10-30 VDC
380mA max. @ 24VDC
(m
ax current 1.0 A)
8.5 Amp/0.2 ms
@ 24VDC
Less than 100 mV
Environmental
Operating and Storage Temperature Operating Humidity Operating Altitude
-40°C to 85°C 10% to 95% (non condensing)
0 to 10,000 ft.
Shock and Vibration
Shock Vibration/Seismic Note
200g @ 10ms 50g, 5-200Hz, Triaxial
Unit must be bulkhead mounted to achieve these
levels.
Reliability
MTBF (Mean Time Between Failure) > Two (2) Million Hours
Network Media
10BaseT > Cat-3 Cable
100BaseTX > Cat-5 Cable
100BaseFX
Multimode: 50-62.5/125μm
Singlemode:
7-10/125μm
Connectors Serial Port
10/100BaseT Six (6) RJ45 Copper Ports Com Parameters 9600, n, 8, 1
100BaseFX Two (2) SC or ST Duplex Ports
Recommended Minimum Wiring Clearance
Top 1" (2.54 cm)
Front 4” (10.16 cm)
308FX2/FXE2KeySpecifications
1-4 N-Tron® Series 300 TX/FX Models User Guide
Introduction and Specifications Revised 2015-12-04
Table 3. 309FX/FXEKeySpecifications
Switch Properties
# of MAC Addresses Aging Time Latency Minimum Backplane Speed Switching Method
4,000 Programmable 2.2 μs 2.6 Gb/s Store & Forward
Physical
Height Width Depth Weight DIN-Rail
5.5 in (13.9cm) 2.3 in (5.8cm) 3.5 in (8.9cm) 1.6 lbs (0.8kg) 35mm
Electrical
Redundant Input
Voltage
Input Current Inrush Current Input Ripple
10-30 VDC
260mA max. @ 24VDC
(max current 0.5 A)
8.5 Amp/0.7 ms
@ 24VDC
Less than 100 mV
Environmental
Operating & Storage Temperature Operating Humidity Operating Altitude
-40°C to 85°C 10% to 95% (non condensing) 0 to 10,000 ft.
Shock and Vibration
Shock Vibration Seismic Note
200g @ 10ms 50g, 5-200Hz, Triaxial
Unit must be bulkhead mounted to achieve these
levels.
Reliability
MTBF (Mean Time Between Failure) Two (2) Million Hours
Network Media
10BaseT > Cat-3 Cable
100BaseTX > Cat-5 Cable
100BaseFX
Multimode: 50-62.5/125μm
Singlemode:
7-10/125μm
Connectors Serial Port
10/100BaseT Eight (8) RJ45 Copper Ports Com Parameters 9600, n, 8, 1
100BaseFX One (1) SC or ST Duplex Port
Recommended Minimum Wiring Clearance
Top 1" (2.54 cm)
Front 4” (10.16 cm)
N-Tron® Series 300 TX/FX Models User Guide 1-5
Introduction and Specifications Revised 2015-12-04
Table 4. 316TXKeySpecifications
Switch Properties
# of MAC Addresses Aging Time Latency Minimum Backplane Speed Switching Method
4,000 Programmable 2.2 μs 2.6 Gb/s Store & Forward
Physical
Height Width Depth Weight DIN-Rail
7.4 in (18.8cm) 2.3 in (5.8cm) 3.5 in (8.9cm) 1.9 lbs (0.9 kg) 35mm
Electrical
Redundant Input
Voltage
Input Current Inrush Current Input Ripple
10-30 VDC
400mA max. @ 24VDC
(max current 1.0 A)
7.0 Amp/0.8 ms @
24VDC
Less than 100 mV
Environmental
Operating & Storage Temperature Operating Humidity Operating Altitude
-40°C to 85°C 10% to 95% (non condensing) 0 to 10,000 ft.
Shock and Vibration
Shock Vibration Seismic Note
200g @ 10ms 50g, 5-200Hz, Triaxial
Unit must be bulkhead mounted to achieve these
levels.
Reliability
MTBF (Mean Time Between Failure) Two (2) Million Hours
Network Media
10BaseT > Cat-3 Cable
100BaseTX > Cat-5 Cable
Connectors Serial Port
10/100BaseT Sixteen (16) RJ45 Copper Ports Com Parameters 9600, n, 8, 1
Recommended Minimum Wiring Clearance
Top 1" (2.54 cm)
Front 2” (5.08 cm)
1-6 N-Tron® Series 300 TX/FX Models User Guide
Introduction and Specifications Revised 2015-12-04
Table 5. 317FX/FXEKeySpecifications
Switch Properties
# of MAC Addresses Aging Time Latency Minimum Backplane Speed Switching Method
4,000 Programmable 2.2 μs 2.6 Gb/s Store & Forward
Physical
Height Width Depth Weight DIN-Rail
7.4 in (18.8cm) 2.3 in (5.8cm) 3.5 in (8.9cm) 1.9 lbs (0.9kg) 35mm
Electrical
Redundant Input
Voltage
Input Current Inrush Current Input Ripple
10-30 VDC
440mA max. @ 24VDC
(max current 1.0 A)
8.5 Amp/0.8 ms
@ 24VDC
Less than 100 mV
Environmental
Operating & Storage Temperature Operating Humidity Operating Altitude
-40°C to 85°C 10% to 95% (non condensing) 0 to 10,000 ft.
Shock and Vibration
Shock Vibration Seismic
200g @ 10ms 50g, 5-200Hz, Triaxial
Reliability
MTBF (Mean Time Between Failure) Two (2) Million Hours
Network Media
10BaseT > Cat-3 Cable
100BaseTX > Cat-5 Cable
100BaseFX
Multimode: 50-62.5/125μm
Singlemode:
7-10/125μm
Connectors Serial Port
10/100BaseT Sixteen (16) RJ45 Copper Ports Com Parameters 9600, n, 8, 1
100BaseFX One (1) SC or ST Duplex Fiber Port
Recommended Minimum Wiring Clearance
Top 1" (2.54 cm)
Front 4” (10.16 cm)
N-Tron® Series 300 TX/FX Models User Guide 1-7
Introduction and Specifications Revised 2015-12-04
Table 6.
Fiber Length 2km* 15km** 40km** 80km**
TX Power Minimum
-19dBm -15dBM -5dBm -5dBm
RX Sensitivity Maximum
-31dBm -31dBm -34dBm -34dBm
Wavelength
1310nm 1310nm 1310nm 1550nm
FiberTransceiverCharacteristicsFX/FXEModels
* = Multimode **= Singlemode
RegulatoryApprovals
Safe ty
Suitable for use in Class I, Division 2, Groups A, B, C and D Hazardous Locations, or Nonhazardous Locations
only.
ATEX Zone 2, Category Ex nA IIC Gc DEMKO 03 ATEX 0316686U.
EMI
•
EN61000-6-4, EN55011 - Class A
• FCC 47 CFR, Part 15, Subpart B - Class A
EMS
•
EN61000-6-2
• EN61000-4-2 (ESD)
• EN61000-4-3 (RS)
• EN61000-4-4 (EFT)
• EN61000-4-5 (Surge)
• EN61000-4-6 (Conducted Disturbances)
ConductedLowFrequency:IEC60533
Shock:IEEE1613(250mm
)
Vibration
•
IEEE 1613 (V.S.4 150mm/s)
• IEC60068-2-6 (Test F
c
)
Cold:IEC60068‐2‐1
DryHe
at:IEC60068‐2‐2
DampHe
at:IEC60068‐2‐30(TestD
b
)
1-8 N-Tron® Series 300 TX/FX Models User Guide
Introduction and Specifications Revised 2015-12-04
Certifications
GOST-R Certified
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

N-Tron 316TX Manuel utilisateur

316TX
N-Tron
Marque
N-Tron
Modèle
316TX
Catégorie
Commutateurs réseau
Taper
Manuel utilisateur
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents