Sony KDL-55NX810 Setup Manual

4-178-827-15(1)

LCD

Digital Color TV

Setup Guide (Operating Instructions)

Setting up your TV

To watch TV

Additional Information

KDL-60EX703 / 60EX701 / 60EX700 / 55EX713 / 55EX711 / 55EX710 / 52EX703 / 52EX701

KDL-52EX700 / 46EX713 / 46EX711 / 46EX710 / 46EX703 / 46EX701 / 46EX700 / 40EX713

KDL-40EX710 / 40EX703 / 40EX700 / 32EX710 / 32EX700

Sony Customer Support

U.S.A.: www.sony.com/tvsupport

Canada: www.sony.ca/support

United States Canada

1.800.222.SONY 1.877.899.SONY

Please Do Not Return

the Product to the Store

2

CAUTION

To prevent electric shock and blade exposure,

do not use this polarized AC plug with an

extension cord, receptacle or other outlet

unless the blades can be fully inserted.

• Operate the TV only on 110-240 V

AC (U.S.A./Canada 120 V AC)

• Avoid operating the TV at

temperatures below 41°F (5°C).

Licensing Information

Macintosh is a trademark of Apple Inc.,

registered in the U.S. and other countries.

HDMI, the HDMI Logo, and High-Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing

LLC in the United States and other countries.

Fergason Patent Properties, LLC:

U.S. Patent No. 5,717,422

U.S. Patent No. 6,816,141

Manufactured under license from Dolby

Laboratories. Dolby and the double-D

symbol are trademarks of Dolby

Laboratories.

In the United States, TV Guide and TV Guide

On Screen are registered trademarks of TV

Guide Entertainment Group, Inc. and/or its

subsidiaries or affiliates, and are used under a

license by Gemstar-TV Guide International,

Inc. and/or its subsidiaries. In Canada, TV

Guide is a registered mark of

Transcontinental Inc., and is used under a

license by Gemstar-TV Guide International,

Inc. and/or its subsidiaries.

The TV Guide On Screen system is

manufactured under license from Gemstar-

TV Guide International, Inc. and/or its

subsidiaries.

The TV Guide On Screen system is protected

by one or more of the following United States

patents 6,498,895; 6,850,693; 6,396,546;

5,940,073; 6,239,794 to Gemstar-TV Guide

International, Inc. and/or its subsidiaries.

Gemstar-TV Guide International, Inc. and/or

its related affiliates are not in any way liable

for the accuracy or availability of the program

schedule information or other data in the TV

Guide On Screen system and cannot

guarantee service availability in your area. In

no event shall Gemstar-TV Guide

International, Inc. and/or its related affiliates

be liable for any damages in connection with

the accuracy or availability of the program

schedule information or other data in the TV

Guide On Screen system.

Blu-ray Disc is a trademark.

“BRAVIA” and , S-Force,

Motionflow, BRAVIA Sync, and are

trademarks or registered marks of Sony

Corporation.

“XMB” and “xross media bar” are

trademarks of Sony Corporation and Sony

Computer Entertainment Inc.

“PlayStation” is a registered trademark and

“PS3” is a trademark of Sony Computer

Entertainment Inc.

DLNA

®

, the DLNA Logo and DLNA

CERTIFIED

®

are trademarks, service marks,

or certification marks of the Digital Living

Network Alliance.

Your BRAVIA TV is

ENERGY STAR

®

qualified

in the “Home” mode.

It meets strict energy

efficiency guidelines set by

the U.S. Environmental

Protection Agency and

Department of Energy. ENERGY STAR is a

joint program of these government agencies,

designed to promote energy efficient products

and practices.

Changes to certain features, settings, and

functionalities of this TV (i.e. TV Guide,

Picture/Sound, Light Sensor, Power Savings)

can increase or change the power

consumption.

Depending upon such changed settings, the

power consumption may exceed the limits

required for the ENERGY STAR

qualification in the “Home” mode.

~

• The illustrations of the remote

control used in this manual are of the

RM-YD033 unless otherwise stated.

Owner’s Record

The information label are located on the

rear of the TV. Record model name and

serial numbers on the information label

in the spaces provided below. Refer to

them whenever you call upon your

Sony dealer regarding this TV.

Model Name

Serial No.

The 32 class has a 31.5 inch viewable

image size (measured diagonally).

The BRAVIA

®

Full HDTV Experience

Thank you for choosing Sony! Your new BRAVIA

®

TV

opens the door to the “Full HDTV Experience.” This

document will help you get the most out of your TV.

Please take a moment to register your TV at:

U.S.A.: http://productregistration.sony.com

Canada: http://www.SonyStyle.ca/registration

Four Steps to a Full HD Experience

Set, Source, Sound, and Setup.

1 Set

Now that you have made the best selection in LCD TV

technology, be sure to remove all accessory contents

from the packaging before setting up your TV.

2 Source

To experience the stunning detail of your BRAVIA TV,

you need access to HD programming.

• Upgrade your signal or content source to high-

definition (HD) by contacting your HD service

provider.

• Receive over-the-air HD broadcasts with an HD-

quality antenna connected directly to the back of your

TV.

Visit www.antennaweb.org for more

information on antenna selection and setup.

• Discover the wealth of entertainment now available

on super-high resolution Blu-ray Disc™ player and

other Sony HD equipment.

3 Sound

Complete the high-definition experience with a

BRAVIA Sync™ surround sound system or A/V

receiver from Sony.

4 Setup

Install your TV and connect your sources. See page 6 for

sample connection diagrams.

To help assure the highest quality for your HD experience,

use Sony HDMI (High-Definition Multimedia Interface)

cables.

To learn more about HDTV, visit:

U.S.A.: http://www.sony.com/HDTV

Canada: http://www.SonyStyle.ca/hd

This TV displays all video input signals in a resolution of 1,920 dots × 1,080 lines.

3

Table of Contents

Checking the accessories..............................................................................................................4

Inserting batteries into the remote control .....................................................................................4

Setting up your TV

Attaching the Table-Top Stand......................................................................................................5

Connecting the TV.........................................................................................................................6

Securing the TV...........................................................................................................................10

Organizing the AC power cord ....................................................................................................11

Running initial setup ....................................................................................................................11

Detaching the Table-Top Stand from the TV...............................................................................12

Using a Wall-Mount Bracket........................................................................................................13

Installing the TV Against a Wall or Enclosed Area ......................................................................13

To watch TV

To watch programs......................................................................................................................14

To use the TV features................................................................................................................14

To use i-Manual...........................................................................................................................15

Additional Information

Troubleshooting...........................................................................................................................16

Specifications ..............................................................................................................................18

• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation

(page 15).

• Retain this manual for future reference.

4

Checking the accessories

AC power cord (1)

Table-Top Stand (1)*

1

(except KDL-60EX700/60EX701/60EX703

models)

Stand Rear Cover (1)*

2

Fixing screws for Table-Top Stand

(M5 × 16) (4) (except KDL-60EX700/

60EX701/60EX703 models)

Assembling Screws for Table-Top

Stand (M5 × 16) (4) (for KDL-40EX713/

40EX710/40EX700/40EX703/32EX710/

32EX700 models)

Remote control (1)*

3

Size AAA batteries (2)

USB Wireless LAN Adapter UWA-BR100 (1)

(for KDL-55EX711/46EX711 and KDL-

60EX701/52EX701/46EX701 models)

*1 The 32" and 40" models require assembling.

Refer to other leaflet to assemble the Table-Top

Stand.

*2 The Stand Rear Cover is attached to the Table-

Top Stand for 46, 52, 55 and 60 inch models.

*3 Please refer to the model name printed on the

remote control.

Inserting batteries into the

remote control

1 Remove the protection sheet.

2 Push and slide the cover upward.

Guidelines for Remote Control

• Point your remote control directly at the IR

sensor located on your TV.

• Make sure that no objects are blocking the

path between the remote control and the IR

sensor on your TV.

• Fluorescent lamps can interfere with your

remote control; try turning off the fluorescent

lamps.

• If you are having problems with the remote

control, reinsert or replace your batteries and

make sure that they are correctly inserted.

5

Setting up your TV

Some TV models are packaged with a detached

Table-Top Stand so you can mount your TV to

a wall right away. If you are not mounting the

TV to a wall, you will need to attach the

Table-Top Stand. You will need a Phillips

screwdriver and the supplied screws to

complete the task. Look for the attachment

instructions provided with the TV.

Be sure to consider the following while setting

up your TV:

• Disconnect all cables when carrying the

TV.

• Carry the TV with the adequate number of

people; larger size TVs require two or more

people.

• Correct hand placement while carrying the

TV is very important for safety and to avoid

damage.

• Ensure your TV has adequate ventilation,

see page 13.

• For best picture quality, do not expose the

screen to direct illumination or sunlight.

• Avoid installing the TV in a room with

reflective wall and floor materials.

• Avoid moving the TV from a cold area to a

warm area. Sudden room temperature

changes may cause moisture condensation.

This may cause the TV to show poor picture

and/or poor color. Should this occur, allow

moisture to evaporate completely before

powering the TV on.

Attaching the Table-Top

Stand

(except KDL-60EX700/60EX701/

60EX703 models)

Refer to the supplied Table-Top Stand

instruction leaflet for proper attachment.

1 Gently slide the TV unit onto the

Table-Top Stand and align the screw

holes.

~

• Do not put stress on the LCD panel or the frame

around the screen.

• Be careful to not pinch your hands or the AC

power cord when you install the TV unit to the

Table-Top Stand.

2 Use the supplied screws to attach the

TV unit to the Table-Top Stand.

~

• If you use an electric screwdriver, set the

tightening torque at approximately 1.5 N·m

{15 kgf·cm}.

3 After all the screws are tighten cover

the Table-Top Stand with the supplied

Stand Rear Cover.

~

• You can attach the TV to the Table-Top Stand

with the Stand Rear Cover on with the exception

of the 32" and 40" models. The 32" and 40"

models must follow the above instructions.

6

Connecting the TV

The following chart shows the high-definition (HD) and standard-definition (SD) video formats

supported by your BRAVIA TV inputs.

* For supported PC formats refer to the i-Manual.

Recommendation of the F type plug

Projection of the inner wire from the

connection part must be less than 1.5 mm.

1.5 mm

7

Setting up your TV

Shown with a Set Top Box with HDMI

connection

Shown with a Set Top Box with

COMPONENT connection

Cable System or VHF/UHF Antenna System

Set Top Box

Cable

or

Antenna

(Continued)

8

Shown with HD BRAVIA

®

Sync™ Basic Connection

Shown with HD Basic Connection with Home Theater System

VIDEO

OUT

COMPONENT

VIDEO OUT

DIGITAL OUT

PCM/DTS/DOLBY DIGITAL

5.1CH OUTPUT

VIDEO

Y

L

R

AUDIO

OUT

L

R

WOOFER

COAXIAL OPTICAL

FRONT REAR CENTER

S VIDEO

HDMI

OUT

AC IN

P

B

/

C

B

P

R

/

C

R

OPT IN

SAT

OPT IN

VIDEO 1

COAX IN AUDIO IN

DVD

DVD I NSAT IN VIDEO 2/BD IN OUT

AUDIO IN AUDIO IN

FRONT R

AM

R

L

R

L

FRONT L SUR R SUR L CENTER SUBWOOFER

*Rear of TV

*Blu-ray Disc

Cable/

Antenna

SAT

(Dish)

HD Cable Box or

HD Satellite Receiver

*A/V Receiver

* Signifies a BRAVIA Sync capable device.

Rear of TV

Cable/SAT

(Dish)

or

Home Theater System

SD Cable Box or

SD Satellite Receiver

Cable/

Antenna

Blu-ray Disc/DVD

9

Setting up your TV

Shown with PC Connection with SD VCR/DVD

Rear of TV Notebook PC

PC

DVDVCR

Splitter

Cable/Antenna

VCR/DVD Combo

or

10

Securing the TV

Sony strongly recommends

taking measures to prevent the

TV from toppling over.

Unsecured TVs may topple and

result in property damage,

serious bodily injury or even

death.

Preventing the TV from

Toppling

• Secure the TV to a wall and/or stand.

• Do not allow children to play or climb on

furniture and TV sets.

• Avoid placing or hanging items on the TV.

• Never install the TV on:

– slippery, unstable and/or uneven surfaces.

– furniture that can easily be used as steps,

such as a chest of drawers.

• Install the TV where it cannot be pulled,

pushed, or knocked over.

• Route all AC power cords and connecting

cables so that they are not accessible to

curious children.

Recommended Measures to

Secure the TV

Consider the following measures when

securing your TV to a TV stand (not supplied).

1 Secure the Stand for the TV

Make sure the TV stand can adequately

support the weight of the TV. Use two angle

braces (not supplied) to secure the stand. For

each angle brace use the appropriate hardware

to:

• Attach one side of the angle brace to the

wall stud.

• Attach the other side to the TV stand.

2 Secure the TV to the Stand

Use the optional hardware listed below (not

supplied):

• M4 × 16 machine screw (screwed into the

TV’s Table-Top Stand)

• A screw or similar (attach it to the TV

stand)

• Rope or chain (strong enough to support the

weight of the TV). Make sure that there is

no excess slack in the rope or chain.

An alternative way to secure the TV is with an

optional Sony Support Belt Kit.

~

Contact Sony Customer Support to obtain the

optional Support Belt Kit by providing your TV

model name.

• For United States call: 1-800-488-7669 or visit:

www.sony.com/accessories

• For Canada call: 1-877-899-7669

Stand

Angle brace

(not supplied)

M4 × 16

machine

screw (not

supplied)

Rope or

chain (not

supplied)

Screw hole on

the Table-Top

Stand

Screw

(not supplied)

11

Setting up your TV

3 Anchor the TV to the Wall

Anchor the TV to the wall by using bolts, wall

anchor and chain (or rope).

~

• Your TV is shipped with screws attached to the

rear of the TV. (They are fastened in the screw

holes for wall mounting.) Be sure to remove the

upper two screws prior to anchoring the TV on a

wall. (Except KDL-46EX713/46EX711/

46EX710/40EX713/40EX710/32EX710

models)

• Securing the TV to the stand without securing

the TV and the stand to the wall provides

minimum protection against the TV toppling

over. For further protection, be sure to follow the

three measures recommended.

Organizing the AC power

cord

Running initial setup

1 Complete your cable connections

before proceeding with the Initial

Setup.

Connect the TV to your nearest power

outlet.

2 Check the ENERGY SAVING

SWITCH setting is on (z).

3 Press POWER on the TV.

When you switch the TV on for the first

time, the Language menu appears on

the screen.

4 Follow the instructions on the screen.

~

• The ENERGY SAVING SWITCH must be

on (z) to set the clock and obtain program

information for the TV Guide.

• Home mode sets the TV to display the settings

optimized for home viewing (this setting is

ENERGY STAR compliant).

5 Select Continue to scan for available

channels and enable the

TV Guide On

Screen

®

feature. If you receive channels

from a cable box or satellite receiver

and do not wish to use the TV’s built-in

tuner, select

Skip.

Selecting

Skip will disable the TV Guide

On Screen

feature, which is only

available when the TV’s tuner is used.

~

• If you skip the channel scan while in the setup

menus, TV Guide will be disabled.

Anchor bolts (not supplied)

Wall-

mount

holes

Rope

or

chain

(not

supplied)

Wall-anchor

(not supplied)

POWER

12

Detaching the Table-Top

Stand from the TV

Remove only the screws marked with on

the TV.

~

• KDL-32EX710/32EX700 models must remove

the stand rear cover prior to detaching the Table-

Top Stand.

• Do not remove the Table-Top Stand for any

reason other than to install corresponding

accessories on the TV.

• When installing the TV on a wall, remove the four

screws from the rear of the TV. (They are fastened

in the screw holes for wall mounting.) Be sure to

store the removed screws in a safe place, keeping

them away from children.

• When attaching the Table-Top Stand again, be

sure to fasten the four screws (previously

removed) to the original holes on the rear of the

TV.

• Do not hold by the Stand Rear Cover while

carrying the Table-Top Stand to prevent dropping

the stand which may cause an injury or damage to

the property.

13

Setting up your TV

Using a Wall-Mount Bracket

Your TV can be mounted on a wall using a

Wall-Mount Bracket (not supplied) out of the

box as packaged. Some larger size TV may

require detaching the Table-Top Stand; see

“Detaching the Table-Top Stand from the TV”

(page 12).

Prepare the TV for the Wall-Mount Bracket

before making cable connections.

For product protection and safety reasons,

Sony strongly recommends that you use the

Wall-Mount Bracket designed for your TV

and the installation should be performed by

a Sony dealer or licensed contractor.

• Follow the instruction guide provided with

the Wall-Mount Bracket for your model.

Sufficient expertise is required in installing

this TV, especially to determine the

strength of the wall for withstanding the

TV’s weight.

• Be sure to use the screws supplied with the

Wall-mount bracket when attaching the

mounting hooks to the TV set.

The supplied screws are designed so that

they are 8 mm to 12 mm in length when

measured from the attaching surface of the

mounting hook.

The diameter and length of the screws differ

depending on the Wall-mount bracket

model. Use of screws other than those

supplied may result in internal damage to

the TV set or cause it to fall, etc.

• Be sure to store the unused screws and

Table-Top Stand in a safe place until you

are ready to attach the Table-Top Stand.

Keep the screws away from small children.

~

• Read the supplied Safety Booklet for additional

safety information.

Installing the TV Against a

Wall or Enclosed Area

Make sure that your TV has adequate

ventilation. Allow enough space around the

TV as shown below. Avoid operating the TV at

temperatures below 41 °F (5 °C).

~

• Inadequate ventilation can lead to overheating of

the TV and may cause damage to your TV or

cause a fire.

8-12 mm

Screw

(supplied with the

Wall-mount bracket)

Mounting Hook

Hook attachment on rear of TV

set

(30 cm)

11

7

/

8

inches

(6 cm)

inches

4 inches

(10 cm)

4 inches

(10 cm)

2

3

/

8

Leave at least this much space around the set.

Installed with stand

inches

11

7

/

8

4 inches

(10 cm)

4 inches

(10 cm)

4 inches (10 cm)

(30 cm)

Installed on the wall

Leave at

least this

much space

around the

set.

Never install the TV set as follows:

Air circulation is blocked.

Wall Wall

14

To watch TV

To watch programs

To use the TV features

Press HOME to display TV Home Menu/

XMB

™

to access TV Settings and other

media and network related content.

Press

OPTIONS

to display a list of convenient

functions and menu shortcuts. The Options menu

items vary based on current input and/or content.

1

Turn on the TV.

1 Check the ENERGY SAVING

SWITCH setting is on (z).

2 Press POWER on the TV or on the

remote control to turn on the TV. (You

may use the 1 button located on the

front or back of the remote control.)

2

Select a TV channel.

To use the Guide

Press GUIDE to display the TV Guide On

Screen to view scheduled programs or to

select a program to watch. Press again to exit

the Guide. Use with 0-9 and ENT to select

digital channels. For example, to enter 2.1,

press , , and ENT.

GUIDE

OPTIONS

HOME

0-9

ENT

2

1-2

Settings

TV

Picture & Display

Adjust the picture and screen settings

Press for:

Picture Adjustments

Ambient Sensor

Screen

Pro Picture Setup

Picture Adjustments

Sound Adjustments

Add to Favorites

Speakers

15

To watch TV

To use i-Manual

x Welcome to i-Manual

x BRAVIA TV Features

x Watching TV

Introduces convenient features such as TV

Guide, Favorites, etc.

x Using the Home Menu

You can find how to customize your TV

settings, etc.

x Fun Features with Connected

Equipment

Introduces how to connect and enjoy optional

equipment.

x Parts Description

x Troubleshooting

You can find solutions for your problems.

x Index

~

• Images and illustrations may differ from what you are watching on this TV.

Your BRAVIA TV comes with an on-screen

manual. You can browse your i-Manual anytime

you need to find the varieties of convenient

functions.

1

Press i-MANUAL.

2

Press F/f/G/g/ to navigate and

select items.

1

2

Welcome to i-Manual

BRAVIA TV Features

Watching TV

Using the Home Menu

Fun Features with Connected Equipment

Parts Description

Troubleshooting

Index

i-Manual

RETURN

Back

16

Troubleshooting

The TV will indicate any problems with the STANDBY indicator flashing in red.

When the STANDBY indicator is flashing

The self-diagnosis function is activated.

1 Count how many times the STANDBY indicator flashes between each three second

break.

For example, the indicator may flash three times, go off for three seconds, then flash

again three times.

2 Press POWER on the TV to turn it off, disconnect the AC power cord, and inform your

dealer or Sony service center of how the indicator flashes (number of flashes).

When the STANDBY indicator is not flashing

1 Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)

2 If the problem persists, contact Sony Customer Support (information provided on the

front cover).

Condition Explanation/Solution

Picture

There is no picture (screen

is dark) and no sound.

• Check the antenna/cable connection.

• Connect the TV to the AC power, and press POWER on the TV.

• If the STANDBY indicator lights up in red, press POWER on the

remote control.

Tiny black dots and/or

bright dots appear on the

screen.

• The screen is composed of pixels. Tiny black dots and/or bright

dots (pixels) on the screen do not indicate a malfunction.

General

The TV’s power cannot be

turned on.

• Check to see the (z) mark on the ENERGY SAVING SWITCH

is pressed.

The TV turns off

automatically (the TV

enters standby mode).

• Check if the Sleep Timer, Timer, or Idle TV Standby is

activated.

• The Auto Shut-off function may be set to On. If Auto

Shut-off is activated and TV receives no signal, the TV will

automatically enter standby mode in 15 minutes. Check Auto

Shut-off is activated under Eco feature of this TV.

The remote does not

function.

• Replace the batteries.

• Your TV may be in SYNC mode. Press SYNC MENU, select TV

Control and then select Home (Menu) or Options to control

the TV.

The “Parental Lock”

password has been

forgotten.

• Enter 4357 for the PIN code. (PIN code 4357 is always accepted.)

Additional Information

17

Additional Information

How to Care for Your BRAVIA

Safety is very important, please read and follow the safety documentation (Safety Booklet)

separately provided.

Unplug the TV and other connected equipment from the wall

outlet before you begin cleaning your TV.

• Wipe the LCD screen gently with a soft cloth.

• Stubborn stains may be removed with a cloth slightly moistened with a

solution of mild soap and warm water.

• If using a chemically pretreated cloth, please follow the instruction

provided on the package.

• Never use strong solvents such as a thinner, alcohol or benzine for cleaning.

• Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated.

The TV should also be placed on a stable surface to prevent it from toppling over (see page 10).

If you have young children or pets at home, check regularly to insure the TV is securely fastened.

18

Specifications

Model name KDL- 60EX703

60EX701

60EX700

52EX703

52EX701

52EX700

46EX703

46EX701

46EX700

40EX703

40EX700

32EX700

System

Television system NTSC: American TV standard

ATSC (8VSB terrestrial): ATSC compliant 8VSB

QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)

Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69

Analog Cable: 1 - 135 / Digital Cable: 1 - 135

Panel system LCD (Liquid Crystal Display) Panel

Speaker output 10 W + 10 W

Input/Output jacks

CABLE/ANTENNA 75-ohm external terminal for RF inputs

VIDEO IN 1/2 VIDEO / AUDIO

COMPONENT IN 1/2 YP

BPR (Component Video) / Signal format: 480i, 480p, 720p, 1080i, 1080p / AUDIO

HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p

HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital

AUDIO (HDMI IN 4)

AUDIO OUT 500 mVrms (typical)

DIGITAL AUDIO OUT

(OPTICAL)

PCM/Dolby Digital optical signal

PC IN D-sub 15-pin, analog RGB

PC/HDMI 4 AUDIO IN Stereo mini jack

LAN

10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network environment.

10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)*

1

USB/DLNA Refer to the i-Manual for supported format.

Power and others

Power requirement 110-240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)

Power consumption

208 W 142 W 125 W 107 W 91 W

in use

in DAM*

2

15 W

(You may hear a clicking noise during the download but this is normal.)

in standby less than 0.17 W with 120 V AC and less than 0.23 W with

240 V AC

less than 0.13 W with 120 V AC and less

than 0.2 W with 240 V AC

Screen size

(inches measured diagonally)

60 inches 52 inches 46 inches 40 inches

31.5 inches

(32 class)

Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)

Speaker

Full range with speaker (mm)

box (2) (inches)

34 × 160

1

3

/8 × 6

3

/8

Dimensions with stand (mm)

(inches)

1,431 × 909 × 386

56

3

/

8

× 35

7

/

8

× 15

1

/

4

1,252 × 805 × 350

49

3

/

8

× 31

3

/

4

× 13

7

/

8

1,118 × 730 × 280

44

1

/

8

× 28

3

/

4

× 11

1

/

8

985 × 655 × 280

38

7

/

8

× 25

7

/

8

× 11

1

/

8

811 × 539 × 250

32 × 21

1

/

4

× 9

7

/

8

without stand (mm)

(inches)

1,431 × 877 × 66

56

3

/

8

× 34

5

/

8

× 2

5

/

8

1,252 × 775 × 65

49

3

/

8

× 30

5

/

8

× 2

5

/

8

1,118 × 698 × 65

44

1

/

8

× 27

1

/

2

× 2

5

/

8

985 × 623 × 64

38

7

/

8

× 24

5

/

8

× 2

5

/

8

811 × 507 × 65

32 × 20 × 2

5

/

8

wall-mount hole pattern (mm)

400 × 300 300 × 300 200 × 200

wall-mount screw size (mm)

M6

(length: refer to diagram on page 13.)

Mass with stand (kg)/(lb.) 38.1/84.0 27.0/59.5 21.3/47.0 17.8/39.3 12.7/28.0

without stand (kg)/(lb.) 31.3/69.0 22.7/50.0 18.4/40.6 14.9/32.9 10.7/23.6

Supplied accessories

See “Checking the accessories” (page 4).

Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket

19

Additional Information

*1 For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).

*2 Download Acquisition Mode (DAM) is used for software updates and/or collecting data for TV Guide On Screen.

• Optional accessories availability depends on its stock.

• Design and specifications are subject to change without notice.

Model name KDL- 55EX713

55EX711

55EX710

46EX713

46EX711

46EX710

40EX713

40EX710

32EX710

System

Television system NTSC: American TV standard

ATSC (8VSB terrestrial): ATSC compliant 8VSB

QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)

Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69

Analog Cable: 1 - 135 / Digital Cable: 1 - 135

Panel system LCD (Liquid Crystal Display) Panel

Speaker output 10 W + 10 W

Input/Output jacks

CABLE/ANTENNA 75-ohm external terminal for RF inputs

VIDEO IN 1/2 VIDEO / AUDIO

COMPONENT IN 1/2 YPBPR (Component Video) / Signal format: 480i, 480p, 720p, 1080i, 1080p / AUDIO

HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p

HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital

AUDIO (HDMI IN 4)

AUDIO OUT 500 mVrms (typical)

DIGITAL AUDIO OUT

(OPTICAL)

PCM/Dolby Digital optical signal

PC IN D-sub 15-pin, analog RGB

PC/HDMI 4 AUDIO IN Stereo mini jack

LAN

10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network environment.

10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)*

1

USB/DLNA Refer to the i-Manual for supported format.

Power and others

Power requirement 110-240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)

Power consumption

138 W 115 W 109 W 63 W

in use

in DAM*

2

15 W (You may hear a

clicking noise during the

download but this is

normal.)

13 W

(You may hear a clicking noise during the download but this is normal.)

in standby less than 0.14 W with

120 V AC and less than

0.2 W with 240 V AC

less than 0.12 W with 120 V AC and less than 0.2 W with 240 V AC

Screen size

(inches measured diagonally)

55 inches 46 inches 40 inches

31.5 inches

(32 class)

Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)

Speaker

Full range with speaker (mm)

box (2) (inches)

34 × 160

1

3

/8 × 6

3

/8

Dimensions with stand (mm)

(inches)

1,278 × 797 × 350

50

3

/8 × 31

1

/2 × 13

7

/8

1,085 × 688 × 260

42

3

/4 × 27

1

/8 × 10

1

/4

952 × 613 × 250

37

1

/2 × 24

1

/4 × 9

7

/8

764 × 507 × 250

30

1

/8 × 20 × 9

7

/8

without stand (mm)

(inches)

1,278 × 765 × 73

50

3

/8 × 30

1

/8 × 2

7

/8

1,085 × 656 × 75

42

3

/4 × 25

7

/8 × 3

952 × 581 × 74

37

1

/2 × 22

7

/8 × 3

764 × 475 × 74

30

1

/8 × 18

3

/4 × 3

wall-mount hole pattern (mm)

400 × 300 300 × 300 200 × 200

wall-mount screw size (mm)

M6

(length: refer to diagram on page 13.)

Mass with stand (kg)/(lb.) 26.1/57.5 18.6/41.0 15.4/34.0 10.8/23.8

without stand (kg)/(lb.) 21.8/48.1 16.3/36.0 13.2/29.1 8.8/19.4

Supplied accessories

See “Checking the accessories” (page 4).

Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket

20

For customers in Canada

This Class B digital apparatus complies with Canadian

ICES-003.

FCC Related Information

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one

or more of the following measures:

❑ Reorient or relocate the receiving antenna.

❑ Increase the separation between the equipment and

receiver.

❑ Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

❑ Consult the dealer or an experienced radio/TV

technician for help.

Safety and Regulatory

To prevent radio interference to the licensed service, this

device is intended to be operated indoors and away from

windows to provide maximum shielding. Equipment (or its

transmit antenna) that is installed outdoors is subject to

licensing.

Only use Wireless LAN indoors when using it with IEEE

802.11a/n (5 GHz).

High power radars are allocated as primary users (meaning

they have priority) of 5250-5350 MHz and 5650-

5850 MHz and these radars could cause interference and/or

damage to this device.

This device uses 5 GHz band for wireless LAN

communication and the maximum gain of the antenna in

this device is 6 dBi.

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum

distance 20 cm between the radiator and your body

(excluding extremities: hands, wrists and feet).

This device and its antenna(s) must not be co-located or

operating with any other antenna or transmitter except

Grant condition.

Note

This television includes a QAM demodulator which should

allow you to receive unscrambled digital cable television

programming via subscription service to a cable service

provider. Availability of digital cable television

programming in your area depends on the type of

programming and signal provided by your cable service

provider.

Compatible optional accessories

information

Use the following Sony optional accessories with

your TV model.

Use with other optional accessories* may cause instability

and could result in property damages or injury.

* For instructions on using the Wall-Mount bracket with

your TV please go to http://esupport.sony.com

for your

TV model and download “Additional Information for

Using Sony Wall-Mount Bracket”.

To Customers

Sufficient expertise is required for TV installations. Be

sure to subcontract the installation to a Sony dealer or

licensed contractor and pay adequate attention to safety

during the installation.

Declaration of Conformity

Trade Name: SONY

Model: KDL-55EX713/KDL-46EX713/KDL-40EX713/

KDL-55EX711/KDL-46EX711/KDL-55EX710/

KDL-46EX710/KDL-40EX710/KDL-32EX710/

KDL-60EX703/KDL-52EX703/KDL-46EX703/

KDL-40EX703/KDL-60EX701/KDL-52EX701/

KDL-46EX701/KDL-60EX700/KDL-52EX700/

KDL-46EX700/KDL-40EX700/KDL-32EX700

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone Number: 858-942-2230

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Pursuant to FCC regulations, you are cautioned that any

changes or modifications not expressly approved in this

manual could void your authority to operate this

equipment.

Sony TV Model No.

KDL-55EX713/KDL-46EX713/

KDL-40EX713/KDL-55EX711/

KDL-46EX711/KDL-55EX710/

KDL-46EX710/KDL-40EX710/

KDL-32EX710/KDL-60EX703/

KDL-52EX703/KDL-46EX703/

KDL-40EX703/KDL-60EX701/

KDL-52EX701/KDL-46EX701/

KDL-60EX700/KDL-52EX700/

KDL-46EX700/KDL-40EX700/

KDL-32EX700

Sony Wall-Mount

Bracket Model No.

SU-WL500

La page charge ...

Sony KDL-55NX810 Setup Manual

Sony KDL-55NX810 Setup Manual

dans d''autres langues

Documents connexes

Autres documents