Salto IQ2 Mode d'emploi

Taper
Mode d'emploi
SALTO SYSTEMS S.L. www.saltosystems.com 1/2 226183-ED.3-20/10/2022
Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Compliance
PRODUCTS DESCRIPTION
PRODUCT TECHNOLOGY POWER SUPPLY SOFTWARE
COMMERCIAL
NAME MODEL BLUETOOTH
LE WIFI IEEE802.15.4 12V PoE CONTROL RF2
MODULE
BLUETOOTH
LE
MODULE
IQ2.0
IQ212 x x x CCCPROD -
IQ213 x x x CCCPROD -
IQ214 x x CCCPROD -
IQ222 x x x x CCCPROD 0091 -
IQ223 x x x x CCCPROD 0091 -
IQ224 x x x CCCPROD 0091 -
EU COMPLIANCE STATEMENT
EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun– Spain), declares that this access control equipment is in compliance
with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy
of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate
ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun– Spain) declara que este equipo de control de
accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y
2011/65/UE (RoHS). Podrá encontrar una copia de la declaración de conformidad original en la siguiente dirección de internet:
https://www.saltosystems.com/certificate
FR Par la présente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) déclare que l’appareil équipement pour le contrôle
d’accès est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS).
Vous pouvez télécharger une copie de la déclaration de conformité originale à travers l’adresse suivante: https://www.saltosystems.com/certificate
DE Hiermit erklärt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gerät Zutrittskontrollgeräte im
Übereinstimmung mit den grundlegendenAnforderungen und den übrigen einschlägigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und
2011/65/EU (RoHS). Eine Kopie der originalen Konformitätserklärung finden Sie auf der folgenden Internetseite:
https://www.saltosystems.com/certificate
NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun– Spain) dat het toestel toegangscontroleapparatuur in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een
kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: https://www.saltosystems.com/certificate
PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos está conforme os requisitos essenciais e outras disposições da Diretiva
2014/53/UE (RED) e 2011/65/EU (RoHS). Poderá encontrar uma cópia da declaração de conformidade original na seguinte direção de internet:
https://www.saltosystems.com/certificate
UKCA DECLARATION OF CONFORMITY
Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun– Spain), declares that this access control equipment is in compliance
with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 and RoHS Regulation 2012. You will be able
to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate
UK importer contact information:
Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road, CV47 0FS Southam, UK.
ELECTRICAL WARNINGS
EN This device must be powered by a power supply classified ES1 and PS2 according to IEC/EN/UL/ 62368-1 & AS/NZS 62368.1.
Distance between this device and human body must be higher than 20 cm.
FR Cet appareil doit être mis sous tension par une alimentation classée ES1 et PS2 selon IEC/EN/UL 62368-1 et AS/NZS 62368.1.
La distance entre cet appareil et le corps humain doit être supérieure à 20 cm.
ES Este equipo debe alimentarse por una fuente de alimentación clasificada como ES1 y PS2 según IEC/EN/UL 62368-1 & AS/NZS 62368.1.
La distancia entre este dispositivo y el cuerpo humano debe ser mayor de 20 cm.
FRECUENCY / OUTPUT MAXIMUM POWER
TECHNOLOGY OPERATING FRECUENCY OUTPUT MAX. POWER
Bluetooth LE 2400 – 2483.5 MHz +6 dBm
IEEE802.15.4 2400 – 2483.5 MHz +5 dBm
Wifi 2400 – 2483.5 MHz +17 dBm
MECHANICAL WARNINGS
The environmental conditions mentioned in the data sheets are always referred to non-condensation situations. The SALTO product should be treated
with care during the installation process to avoid any aggressive contact that may damage the unit. If you have questions or doubts on this, please contact
your authorized SALTO supplier.
SALTO SYSTEMS S.L. www.saltosystems.com 2/2 226183-ED.3-20/10/2022
Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Compliance
LEGAL WARNINGS
The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not
be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of
the equipment or which contravenes, transgresses or infringes in any manner the above mentioned instructions. SALTO’s liability concerning the
equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations
performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel.
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This product is a radio transmitter and receiver to be used in mobile conditions.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules.
Responsible Party – U.S. Contact Information
Salto Systems Inc. USA
1780 Corporate Drive, Suite 400
Norcross, GA
30093
v.kourelos@saltosystems.com
ISED COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Distance between 10088A-IQ2 and human body must be higher than 20 cm. Distance entre le 10088A-IQ2 et le corps humain doit être supérieure à 20 cm.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003.
IMDA COMPLIANCE LABEL
  • Page 1 1
  • Page 2 2

Salto IQ2 Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues