Axis M5013 Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

INSTALLATION GUIDE
AXIS M5013-V PTZ Dome Network Camera
AXIS M5014-V PTZ Dome Network Camera
Legal Considerations
Video surveillance can be regulated by laws that vary from country to
country. Check the laws in your local region before using this product
for surveillance purposes.
Liability
Every care has been taken in the preparation of this document. Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
Axis Communications AB shall not be liable nor responsible for
incidental or consequential damages in connection with the
furnishing, performance or use of this material. This product is only to
be used for its intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology
embodied in the product described in this document. In particular,
and without limitation, these intellectual property rights may include
one or more of the patents listed at http://www.axis.com/patent.htm
and one or more additional patents or pending patent applications in
the US and other countries.
This product contains source code copyright Apple Computer, Inc.,
under the terms of Apple Public Source License 2.0 (see
http://www.opensource.apple.com/apsl). The source code is available
from http://developer.apple.com/darwin/projects/bonjour/
Equipment Modifications
This equipment must be installed and used in strict accordance with
the instructions given in the user documentation. This equipment
contains no user-serviceable components. Unauthorized equipment
changes or modifications will invalidate all applicable regulatory
certifications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are
registered trademarks or trademark applications of Axis AB in various
jurisdictions. All other company names and products are trademarks
or registered trademarks of their respective companies.
Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer, Linux,
Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows,
Windows Vista and WWW are registered trademarks of the respective
holders. Java and all Java-based trademarks and logos are trademarks
or registered trademarks of Oracle and/or its affiliates. UPnPTM is a
certification mark of the UPnPTM Implementers Corporation.
SD, SDHC and SDXC are trademarks or registered trademarks of
SD-3C, LLC in the United States, other countries or both. Also,
miniSD, microSD, miniSDHC, microSDHC, microSDXC are all
trademarks or registered trademarks of SD-3C, LLC in the United
States, other countries or both.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries through the appropriate channels to
ensure a rapid response. If you are connected to the Internet, you can:
• download user documentation and software updates
• find answers to resolved problems in the FAQ database. Search by
product, category, or phrase
• report problems to Axis support staff by logging in to your private
support area
• chat with Axis support staff (selected countries only)
• visit Axis Support at www.axis.com/techsup/
Should you require any technical assistance, please contact
appropriate channels according to your AVHS license agreement to
ensure a rapid response.
Learn More!
Visit Axis learning center www.axis.com/academy/ for useful
trainings, webinars, tutorials and guides.
Regulatory Information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
• Electromagnetic Compatibility (EMC) Directive 2004/108/EC. See
Electromagnetic Compatibility (EMC).
• Low Voltage (LVD) Directive 2006/95/EC. See Safety.
• Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU.
See Disposal and Recycling.
A copy of the original declaration of conformity may be obtained
from Axis Communications AB, Emdalavagen 14, SE-223 69 Lund.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill applicable
standards for:
• Radio frequency emission when installed according to the
instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena when
installed according to the instructions and used in its intended
environment.
USA
This equipment has been tested using a shielded network cable (STP)
and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Europe
This digital equipment fulfills the requirements for RF emission
according to the Class A limit of EN 55022. Notice! This is a Class A
product. In a domestic environment this product may cause RF
interference, in which case the user may be required to take adequate
measures.
This product fulfills the requirements for immunity according to EN
61000-6-1 residential, commercial and light-industrial environments.
This product fulfills the requirements for immunity according to EN
61000-6-2 industrial environments.
This product fulfills the requirements for immunity according to EN
55024 office and commercial environments
Australia/New Zealand
This digital equipment fulfills the requirements for RF emission
according to the Class A limit of AS/NZS CISPR 22. Notice! This is a
Class A product. In a domestic environment this product may cause
RF interference, in which case the user may be required to take
adequate measures.
Japan - B
Korea -
ࢇ̛̛Е߶הࡈ$̗ࢷ࢕ળࢶଢ̛̛Ի۰
શ֐࢕ӖЕیࡈ࢕Еࢇࢺࡶ࣯ࢂଜݤ̛؂Ԃֲ
ɼࢽ࠹ࢂएࠇ߾۰یࡈଜЕʨࡶּࢶࡳԻଢТЬ
Safety
This product complies with IEC/EN 60950-1, Safety of Information
Technology Equipment.
Disposal and Recycling
When this product has reached the end of its useful life, dispose of it
according to local raws and regulations. For information about your
nearest designated collection point, contact your local authority
responsible for waste disposal. In accordance with local legislation,
penalties may be applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall not be disposed
of together with household or commercial waste.
Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE) is applicable in the European Union
member states. To prevent potential harm to human
health and the environment, the product must be disposed of in an
approved and environmentally safe recycling process. For information
about your nearest designated collection point, contact your local
authority responsible for waste disposal. Businesses should contact
the product supplier for information about how to dispose of this
product correctly.
This product complies with the requirements of Directive 2011/65/EU
on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS).
China
This product complies with the requirements of the
legislative act Administration on the Control of Pollution
Caused by Electronic Information Products (ACPEIP).
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
English
Safeguards
Please read through this Installation Guide carefully before installing
the Axis product. Keep the Installation Guide for further reference.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to vibration, shocks or heavy
pressure. Do not install the product on unstable brackets, unstable
or vibrating surfaces or walls, since this could cause damage to the
product.
• Only use applicable tools when installing the Axis product;
excessive force could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners. Use a
damp cloth for cleaning.
• Use only accessories that comply with technical specification of the
product. These can be provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself, contact Axis or
your Axis reseller for service matters.
• This Axis product shall be used in compliance with local laws and
regulations.
• The Axis product should be installed by a trained professional.
Observe relevant national and local regulations for the installation.
Transportation
• When transporting the Axis product, use the original packaging or
equivalent to prevent damage to the product.
Battery Replacement
This Axis product uses a 3.0 V CR2032 lithium battery as the power
supply for its internal real-time clock (RTC). Under normal conditions
this battery will last for a minimum of 5 years. Low battery power
affects the operation of the RTC, causing it to reset at every
power-up. A log message will appear when the battery needs
replacing. The battery should not be replaced unless required!
If the battery does need replacing, please contact
www.axis.com/techsup for assistance.
• Dispose of used batteries according to the manufacturer's
instructions.
• Risk of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent battery, as recommended
by the manufacturer.
Power Requirements
Power over Ethernet, IEEE 802.3af class 3,44 – 57 V DC max 12.95 W
Dome Cover Cleaning
• Be careful not to scratch or damage the dome cover. Do not clean a
dome cover that looks clean to the eye and never polish the
surface. Excessive cleaning could damage the surface.
• For general cleaning of a dome cover it is recommended to use a
non-abrasive, solvent-free neutral soap or detergent with water
and a soft cloth. Rinse well with clean lukewarm water. Dry with a
soft cloth to prevent water spotting.
• Never use harsh detergents, gasoline, benzene or acetone etc. and
avoid cleaning in direct sunlight or at elevated temperatures.
Français
Mesures de sécurité
Lisez attentivement le présent Guide d'installation avant d'installer le
produit Axis. Conservez le Guide d'installation pour une utilisation
ultérieure.
• Conservez le produit Axis dans un environnement sec et aéré.
• Évitez d'exposer le produit Axis aux vibrations, aux chocs ou à une
forte pression. N'installez pas le produit sur un support instable, ou
des surfaces ou des murs instables ou vibrants, car cela pourrait
l'endommager.
• N'utilisez que les outils applicables pour installer le produit Axis ;
une force excessive pourrait endommager le produit.
• Pour le nettoyage, n’utilisez ni produits chimiques, ni substances
caustiques ou aérosols. Utilisez un chiffon humide pour le
nettoyage.
• N’utilisez que des accessoires conformes aux caractéristiques
techniques du produit. Ceux-ci peuvent être fournis par Axis ou par
un fournisseur tiers.
• Utilisez uniquement des pièces de rechange fournies ou
recommandées par Axis.
• Ne tentez pas de réparer le produit vous-même, contactez Axis ou
votre revendeur Axis pour toute réparation.
• Ce produit Axis doit être utilisé conformément aux lois et
réglementations locales en vigueur.
• Le produit Axis doit être installé par un professionnel qualifié.
Veuillez vous conformer aux règlements nationaux et locaux
relatifs à l'installation.
Transport
• Pour transporter le produit Axis et éviter de l'endommager, utilisez
l'emballage d'origine ou un emballage équivalent.
Remplacement des piles
Ce produit Axis nécessite une pile au lithium CR2032 de 3,0 V pour
l'alimentation de son horloge en temps réel interne. Dans des
conditions normales d'utilisation, cette pile est censée durer au moins
5 ans. Si la pile est faible, le fonctionnement de l'horloge en temps
réel peut être affecté et entraîner sa réinitialisation à chaque mise
sous tension. Un message enregistré apparaît lorsque la pile doit être
remplacée. Ne remplacez la pile qu'en cas de nécessité !
Si la pile doit être remplacée, veuillez contacter
www.axis.com/techsup pour obtenir de l’aide.
• Jetez les piles usagées conformément aux consignes du fabricant.
• Le remplacement incorrect de la pile peut entraîner un risque
d'explosion.
• Remplacez la pile par une pile identique ou équivalente
uniquement, en respectant les recommandations du fabricant.
Nettoyer la bulle du dôme
• Veillez à ne pas rayer ou endommager la bulle du dôme. Ne
nettoyez pas la bulle du dôme si elle semble propre à l'œil nu et ne
frottez jamais sa surface. Un nettoyage excessif peut
l'endommager.
• Pour le nettoyage général de la bulle du dôme, il est recommandé
d'utiliser un savon ou un détergent neutre sans solvant, non
abrasif, avec de l'eau et un chiffon doux. Rincez abondamment
avec de l’eau tiède et propre. Séchez à l'aide d'un chiffon doux pour
éviter les tâches d'eau.
• N'utilisez jamais de détergents forts, d'essence, de benzène ou
d'acétone, etc. et évitez toute exposition directe aux rayons du
soleil ou à des températures élevées lors du nettoyage.
Deutsch
Sicherheitsvorkehrungen
Bitte lesen Sie diese Installationsanleitung sorgfältig durch, bevor Sie
mit der Installation des Axis Produkts beginnen. Halten Sie die
Installationsanleitung bereit, falls Sie darauf zurückgreifen müssen.
• Lagern Sie das Axis-Produkt in einer trockenen und belüfteten
Umgebung.
• Setzen Sie das Axis Produkt keinen Vibrationen, Erschütterungen
oder starkem Druck aus. Installieren Sie das Produkt nicht an
instabilen Halterungen oder instabilen oder vibrierenden
Oberflächen oder Mauern, da dadurch das Produkt beschädigt
werden könnte.
• Verwenden Sie bei der Installation des Axis Produkts nur geeignetes
Werkzeug; zu hoher Kraftaufwand kann das Produkt beschädigen.
• Verwenden Sie keine chemischen, ätzenden oder aerosolhaltigen
Reinigungsmittel. Verwenden Sie zur Reinigung ein feuchtes Tuch.
• Verwenden Sie nur Zubehör, das den technischen Spezifikationen
des Produkts entspricht. Dieses ist von Axis oder Drittanbietern
erhältlich.
• Verwenden Sie nur Ersatzteile, die von Axis empfohlen bzw.
bereitgestellt wurden.
• Versuchen Sie nicht, das Produkt selbst zu reparieren. Wenden Sie
sich bei Service-Angelegenheiten an Axis oder an Ihren
Axis-Händler.
• Verwenden Sie dieses Axis-Produkt unter Beachtung der vor Ort
geltenden rechtlichen Bestimmungen.
• Das Axis Produkt sollte nur von geschultem Fachpersonal installiert
werden. Beachten Sie bei der Montage die geltenden nationalen
und lokalen Bestimmungen.
Transport
• Transportieren Sie das Axis-Produkt nur in der Originalverpackung
bzw. in einer vergleichbaren Verpackung, damit das Produkt nicht
beschädigt wird.
Batteriewechsel
Dieses Axis-Produkt ist mit einer 3,0 V CR2032 Lithium-Batterie als
Stromversorgung für die interne Echtzeituhr (RTC) ausgestattet. Unter
normalen Bedingungen hält die Batterie mindestens 5 Jahre. Bei
entladener Batterie ist der Betrieb der Echtzeituhr nicht mehr
ausreichend gewährleistet, so dass die Uhr bei jedem Systemstart
zurückgesetzt wird. Sie erhalten eine Protokollnachricht, wenn ein
Batteriewechsel erforderlich ist. Die Batterie sollte erst bei Bedarf
gewechselt werden.
Unter www.axis.com/techsup finden Sie Informationen darüber, was
Sie beim Austausch der Batterie beachten müssen.
• Verbrauchte Batterien sind gemäß den Herstelleranweisungen zu
entsorgen.
• Explosionsgefahr bei fehlerhaftem Batteriewechsel!
• Die Batterie muss durch dasselbe oder ein gleichwertiges Fabrikat
ersetzt werden, das vom Hersteller zugelassen ist.
Reinigung der Kuppelabdeckung
• Achten Sie darauf, die Kuppelabdeckung nicht zu zerkratzen oder zu
beschädigen. Reinigen Sie die Kuppelabdeckung nicht, solange sie
sauber aussieht, und polieren Sie niemals die Oberfläche.
Übermäßiges Reinigen kann die Oberfläche beschädigen.
• Zur allgemeinen Reinigung einer Kuppelabdeckung wird die
Verwendung einer nicht aggressiven, lösungsmittelfreien neutralen
Seife bzw. eines solchen Reinigungsmittels zusammen mit Wasser
und einem weichen Tuch empfohlen. Spülen Sie gut mit sauberem,
lauwarmem Wasser nach. Trocknen Sie die Kuppelabdeckung mit
einem weichen Tuch ab, um Wasserflecken zu vermeiden.
• Verwenden Sie niemals scharfe Reinigungsmittel, Benzin, Benzol,
Aceton o. Ä., und führen Sie die Reinigung nicht unter direkter
Sonneneinstrahlung oder bei hohen Temperaturen durch.
Italiano
Sicurezza
Leggere attentamente questa Guida all'installazione prima di
installare un prodotto Axis. Conservare la Guida all'installazione per
ulteriori riferimenti.
• Conservare il prodotto Axis in un ambiente asciutto e ben ventilato.
• Evitare di esporre il prodotto Axis alle vibrazioni, agli urti o a forte
pressione. Non installare il prodotto su staffe instabili, superfici o
pareti instabili o vibranti, poiché ciò potrebbe danneggiare il
prodotto.
• Utilizzare solo strumenti idonei quando si installa il prodotto Axis.
Una forza eccessiva potrebbe danneggiare il prodotto.
• Non utilizzare sostanze chimiche, agenti caustici o detergenti spray.
Utilizzare un panno umido per la pulizia.
• Utilizzare solo accessori conformi con le specifiche tecniche del
prodotto. Queste possono essere fornite da Axis o da terze parti.
• Utilizzare solo parti di ricambio fornite o raccomandate da Axis.
• Non tentare di riparare il prodotto da soli, contattare Axis o il
rivenditore di zona Axis per assistenza.
• Questo prodotto Axis deve essere utilizzato in conformità alle leggi
e alle disposizioni locali.
• Il prodotto Axis deve essere installato da un tecnico qualificato.
Osservare le disposizioni nazionali e locali per l'installazione.
Trasporto
• Quando si trasporta il prodotto Axis, utilizzare l'imballo originale o
un imballo equivalente per evitare di danneggiare il prodotto.
Sostituzione della batteria
Questo prodotto Axis utilizza una batteria al litio CR2032 da 3.0 V per
alimentare il real-time clock (RTC) interno. In normali condizioni
questa batteria ha una durata di almeno 5 anni. La batteria scarica
influisce sul funzionamento dell'RTC, che viene reimpostato ad ogni
accensione. Un messaggio di registro apparirà quando la batteria
dovrà essere sostituita. La batteria non deve essere sostituita a meno
che non sia necessario.
Se la batteria deve essere sostituita, contattare
www.axis.com/techsup per assistenza.
• Smaltire le batterie usate secondo le istruzioni del produttore.
• Rischio di esplosione se la batteria non viene sostituita
correttamente.
• Sostituire solo con una batteria identica o equivalente, come
raccomandato dal produttore.
Pulizia della copertura a cupola
• Fare attenzione a non graffiare o danneggiare la copertura a
cupola. Non pulire una copertura a cupola visivamente pulita e non
lucidare mai la superficie. Una pulizia eccessiva potrebbe
danneggiare la superficie.
• Per la pulizia generale della copertura a cupola si raccomanda l'uso
di un sapone neutro, non abrasivo e privo di solventi o di un
detergente con acqua e un panno morbido. Risciacquare
perfettamente con acqua tiepida pulita. Asciugare con un panno
morbido per evitare macchie d'acqua.
• Non utilizzare detergenti irritanti, benzina, benzene o acetone, ecc.
ed evitare di pulire alla luce diretta del sole o a temperature
elevate.
Español
Medidas preventivas
Lea detenidamente esta Guía de instalación antes de instalar el
producto Axis. Guarde la Guía de instalación para poder consultarla
en el futuro.
• Guarde el producto Axis en un entorno seco y ventilado.
• Evite exponer el producto Axis a vibraciones, golpes o presiones
excesivas. No instale el producto en soportes inestables ni en
superficies o paredes inestables o con vibraciones, ya que esto
podría dañarlo.
• Utilice solo las herramientas apropiadas para instalar el producto
Axis; una fuerza excesiva podría dañarlo.
• No utilice productos químicos, agentes cáusticos ni limpiadores en
aerosol. Límpielo con un paño húmedo.
• Utilice solo accesorios que cumplan las especificaciones técnicas
del producto. Puede obtenerlos de Axis o de un tercero.
• Utilice solo piezas de recambio suministradas o recomendadas por
Axis.
• No intente reparar el producto usted mismo, póngase en contacto
con Axis o con el distribuidor de Axis para los temas de servicio
técnico.
• Este producto Axis se utilizará de conformidad con la legislación y
normativas locales.
• La instalación del producto Axis debe realizarla un profesional
cualificado. Siga las normativas nacionales y locales aplicables para
la instalación.
Transporte
• A la hora de transportar el producto Axis, utilice el embalaje
original o uno equivalente para no dañar el producto.
Sustitución de la batería
Este producto Axis utiliza una batería de litio CR2032 3.0 de 3,0 V
como fuente de alimentación para su reloj de tiempo real interno
(RTC). En condiciones normales, esta batería durará un mínimo de 5
años. Cuando la batería tiene poca carga, el funcionamiento del RTC
se puede ver afectado, ya que esto puede hacer que se reinicie cada
vez que se encienda. Aparecerá un mensaje de registro cuando sea
necesario sustituir la batería. No se debe sustituir la batería a menos
que sea necesario.
Si necesita sustituir la batería, visite la página www.axis.com/techsup
para recibir asistencia.
• Deseche las baterías usadas según las instrucciones del fabricante.
• Existe peligro de explosión si la batería se sustituye de forma
incorrecta.
• Utilice solo baterías de recambio iguales o equivalentes, de acuerdo
con las recomendaciones del fabricante.
Limpieza de la cubierta del domo
• Tenga cuidado de no arañar ni dañar la cubierta del domo. No
limpie una cubierta del domo que parezca limpia y no pula nunca la
superficie. El exceso de limpieza podría dañar la superficie.
• Para la limpieza general de la cubierta del domo se recomienda
utilizar un jabón neutro no abrasivo y sin disolvente o un
detergente con agua y un paño suave. Aclare bien con agua limpia
y tibia. Seque con un paño suave para evitar las manchas de agua.
• No utilice detergentes abrasivos, gasolina, benceno, acetona, etc., y
evite limpiarlo con luz directa del sol o a temperaturas elevadas.
AXIS Product Installation Guide Page 7
A
xi
s
N
e
t
w
o
r
k
V
i
d
e
o
P
r
o
du
c
t
s
C
D
-
4
9
7
3
9
/E
N
/
R
3
.1
0
/
1
21
1
-
©
2
01
2
A
xi
s
C
o
m
m
u
n
ic
a
t
io
n
s
A
B.
Al
l
r
ig
h
t
s
r
es
e
r
v
e
d.
Installation and
management software
Camera owner authentication key
The authentication key on this label is used to authenticate the owner/administrator of this Axis
camera. The key is associated with the camera’s unique serial number (S/N), as shown at the top of the
label. The authentication key is used for registering the camera with an AVHS service provider for hosted
video. For more information and help to find a local AVHS Service Provider, go to:
Please retain this document for future reference.
http://www.axis.com/products/avhs/
Label here
©2006-2010 Axis Communications AB.
Axis is a registered trademark. All other company names and products are
trademarks or registered trademarks of their respective companies. We
reserve the right to introduce modifications without notice. Part No. 38655
1x
2x
1x
1x
Page 8 AXIS Product Installation Guide
1
AXIS Product Installation Guide Page 9
2
Page 10 AXIS Product Installation Guide
3
4
AXIS XXXXX
P/N: XXXX-X
S/N: XXXXXX
This device compli
Operation is subje
(1) this device may
(2) this device mus
interference that m
This Class B digita
N1202
AXIS XXXXX
P/N:XXXX X
AXIS XXXXX
P/N: XXXX-X
S/N: XXXXXX
This device compli
Operation is subjec
(1) this device may
(2) this device mus
interference that m
This Class B digita
N1202
AXIS XXXXX
P/N:XXXX X
AXIS Product Installation Guide Page 11
5
Page 12 AXIS Product Installation Guide
6
7
0.75 Nm
(0.55 lb ft)
T20
AXIS Product Installation Guide Page 13
8
2017
Page 14 AXIS Product Installation Guide
10
9
AXIS Product Installation Guide Page 15
11
12
Page 16 AXIS Product Installation Guide
13
23
AXIS Product Installation Guide Page 17
15
14
Page 18 AXIS Product Installation Guide
17
16
AXIS Product Installation Guide Page 19
18
23
Page 20 AXIS Product Installation Guide
20
19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

Axis M5013 Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues