Epson EMP-TW10 Le manuel du propriétaire

1

User's Guide

Contents

Unpacking the Projector ..................................................................................................................... 2

Meaning of Symbols............................................................................................................................ 2

Features............................................................................................................................. 3

Before Using the Projector

Part Names and Functions .............................................................................................. 4

Front/Top.............................................................................................................................................. 4

Control panel........................................................................................................................................ 4

Rear....................................................................................................................................................... 5

Base ...................................................................................................................................................... 5

Remote Control.................................................................................................................................... 6

Installation......................................................................................................................... 8

Installation method.............................................................................................................................. 8

Projection distance and screen size.................................................................................................. 8

Other installation methods ................................................................................................................. 9

Connecting Equipment

Connecting a Computer ................................................................................................. 10

Compatible computers...................................................................................................................... 10

Outputting images and audio from a computer.............................................................................. 11

Adjusting computer generated images ........................................................................................... 11

Configuration Menus

Menu operation ............................................................................................................... 12

Function list .................................................................................................................... 13

Troubleshooting

When You Suspect a Problem....................................................................................... 16

Power indicator.................................................................................................................................. 16

Warning indicator .............................................................................................................................. 16

When the indicators provide no help............................................................................................... 17

Appendices

Projector Care ................................................................................................................. 20

Cleaning.............................................................................................................................................. 20

Replacing consumables.................................................................................................................... 21

Glossary .......................................................................................................................... 24

Supported Display Resolutions .................................................................................... 26

Optional Accessories ..................................................................................................... 28

Specifications ................................................................................................................. 29

Appearance ..................................................................................................................... 30

Index ................................................................................................................................ 31

2-

Unpacking the Projector

When you unpack the projector, make sure that you have all these components. If any of the

components are missing or incorrect, please contact the place of purchase.

Meaning of Symbols

The terms "this unit" and "this projector" which appear in this manual may also refer to the accessories supplied with the

projector and other optional products.

Projector Remote control Power cable

For connecting the

projector to a wall

outlet.

Rubber feet

Attach when installing

the projector upside

down.

Documentation

User's Guide (this guide)

Safety Instructions/World-Wide Warranty Terms

Quick Reference Guide

c

Indicates the possibility that people may be injured or the equipment may be damaged if these

symbols are ignored.

p

Indicates important related information or useful information and things you should know.

s

Indicates related topics and pages which contain more detailed information.

g

Provides terminology definitions. s "Glossary" P.24

Features-3

Features

fColour mode

Image quality can be selected according to the type of

scene. s "Selecting a colour mode" Quick Reference

Guide

fCompact and lightweight

The projector's compact body is easy to carry.

Dimensions: 29.4(d) × 40.2(w) × 11.4(h) cm

Weight : approx. 3.6kg

fAuto setup

(Computer connections)

The projector analyses the signal of the computer to

which it is connected and automatically makes

adjustments to ensure optimal projection results.

s "Auto setup (Computer connections)" P.11

fClear, vivid, images

The projector's high resolution and high luminance

achieves a legible display. Project sharp, detailed images,

even in bright places.

fEase of use

Various projector operations can be easily performed

using the included remote control, as follows:

• using the configuration menus

• recalling your favourite settings

• pausing projection

4-Part Names and Functions

Before Using the Projector

Part Names and Functions

Front/Top

Control panel

• remote control infrared

receiver s P. 7

Receives signals from the

remote control.

• ventilation outlet

• lens cover

Attach when not using the

projector to prevent the lens from becoming dirty or

damaged.

• focus ring

s Quick Reference

Guide

Adjusts the image focus.

• front foot (left) s Quick

Reference Guide

Another front foot is located

on the right side.

Extend and retract to adjust

the projection angle.

• control panel s P.4

•zoom ring

s Quick Reference

Guide

Adjusts the size of the

projected image.

• [Power] button s Quick

Reference Guide

Turns the projector on and off.

• Power indicator s P. 1 6

Flashes or lights in different colours

to indicate the operating status of

the projector.

•[u][d][l][r] buttons s P.12

•[w][v]: keystone correction buttons

s Quick Reference Guide

Press to correct keystone distortion in images.

•[a][b]: volume buttons

Adjusts the volume.

• Warning indicator s P.16

Flashes or lights in different colours

to alert you to problems with the

projector.

• [Menu] button s P. 12

Displays or hides the

configuration menus.

• [Source] button

s Quick

Reference Guide

Switches the input

source between the

Input A port, S-Video

port, Video port and

Input B port each

time the button is

pressed.

•[e] button s P.12

Accepts a menu item or advances

to the next screen or menu when

viewing configuration menus.

• [Esc] button s P. 1 2

Stops the current function.

Displays the previous screen or

menu when viewing

configuration menus.

• [Aspect] button s Quick

Reference Guide

Changes the Aspect ratiog of

the projected image.

Part Names and Functions-5

Before Using the Projector

Rear

Base

• Input B port s P.11

Inputs signals from a computer.

• remote control infrared

receiver s P. 7

Receives signals from the remote

control.

• power inlet s Quick

Reference Guide

Connects the power cable.

• Video port s Quick

Reference Guide

Inputs Composite Videog

signals to the projector.

Connect using an A/V cable.

• S-Video port s Quick

Reference Guide

Inputs S-Videog signals to the

projector.

Connect using an S-Video cable.

• security lock s P. 2 4

• Audio port s P.11,

Quick Reference Guide

Inputs audio signals to the projector. Connect using an A/V

cable, or a stereo RCA cable.

When using computer and video equipment alternately, swap

the cable or use an audio switch (commercially available).

• Control (RS-232C) port

Connects the projector to a

computer using an RS-232C

cable. This port is for control use

and should not be used by the

customer.

• remote control holder s P. 7

Store the remote control in here when

not in use.

• Input A port s Quick

Reference Guide

Inputs Component Videog or

RGB-Video

g signals.

• speaker

• Ceiling mount fixing points

(3 points)

Install the optional ceiling mount

here when suspending the projector

from the ceiling.

• lamp cover s P.22

Open this cover when

replacing the lamp inside

the projector.

• air filter (air intake vent)

s P.20, P.21

Prevents dust and other foreign

particles from being drawn into

the projector. Open the cover

when changing the air filter.

6-Part Names and Functions

Before Using the Projector

Remote Control

• remote control infrared transmitter

Transmits remote control signals.

• [Aspect] button s Quick

Reference Guide

Changes the aspect ratio of the

projected image.

• [Source] buttons

s Quick Reference Guide

[Input A/B]: Switches between the

signal source being input to the

Input A port, and the Input B port.

[S-Video/Video]: Switches between

the signal source being input to the

S-Video port and the Video port.

• [Esc] button s P.12

Stops the current function.

Displays the previous screen or

menu when viewing configuration

menus.

•[e] button s P.12

Accepts a menu item or advances

to the next screen or menu when

viewing configuration menus.

•[u][d][l][r] buttons

s P.12

Selects menu items and setting

values.

• [Power] button

s Quick Reference Guide

Turns the projector on and off.

• [A/V Mute] button

s Quick Reference Guide

Momentarily turns off the audio and

video.

• [Still] button

s Quick Reference Guide

Keeps the current computer or

video image on the screen.

• [Auto] button s P.1 1

Automatically adjusts analog RGB

computer signals to their optimum

settings.

• [Color Mode] button

s Quick Reference Guide

Selects the colour mode. The

colour mode changes in the order

of Dynamic, Living Room, Theatre

and Theatre Black each time the

button is pressed.

•[a][b]: volume buttons

Adjusts the volume.

• [Menu] button s P.1 2

Displays or hides the

configuration menus.

• [Memory] button

s Quick Reference Guide

Recalls settings saved to memory

in the configuration menus.

Part Names and Functions-7

Before Using the Projector

fBefore using the Remote Control

Remove the insulating tape.

fUsing the Remote Control

Operate the remote control by aiming it at the remote control infrared receiver on the projector.

fOperating range

Operable distance: Max. approx. 6m (20ft.)

(May be shorter depending on conditions.)

Operable angle : approx. 30° horizontally, 15° vertically

* The remote control infrared receiver on the back of the projector can also be used under the same conditions.

fStorage

When not using the remote control, please store it in the remote control holder on the projector.

remote control

infrared receiver

remote control

infrared receiver

p

If direct sunlight or fluorescent lighting hits the remote control infrared receiver, you may not be able to use the remote

control.

15°

30° 30°

Max 6m

8-Installation

Installation

Installation method

Set up the projector so that it is at right angles to a screen.

Projection distance and screen size

The values should be used as a guide for setting the projector.

c

Be sure to read the "Safety Instructions / World-Wide Warranty Terms" guide before installation.

Projection distance:

73-1165cm

90°

Centre of lens

Screen

Projection distance

20cm(7.9in.)or more

16:9 Screen size

cm

(ft.)

30" 40" 60" 80" 100" 200" 300"

66 × 37

(2.1 × 1.2)

89 × 50

(2.8 × 1.6)

130 × 75

(4.2 × 2.4)

180 × 100

(5.7 × 3.2)

220 × 120

(7.2 × 4.1)

440 × 250

(14.4 × 8.2)

660 × 370

(21.6 × 12.1)

Projection distance

cm

(ft.)

73 − 114

(2.4 − 3.7)

98 − 153

(3.2 − 5.0)

149 − 231

(4.9 − 7.6)

200 − 309

(6.6 − 10.1)

251 − 387

(8.2 − 12.7)

504 − 776

(16.5 − 25.5)

758 − 1165

(24.9 − 38.2)

Installation-9

Before Using the Projector

Other installation methods

fProjecting when upside down

(Front/Ceiling)

Attach the enclosed rubber feet to prevent the operation

panel from contacting the surface on which it is placed.

fCeiling projection

fCeiling/Rear projection

(Using a translucent screen)

fRear projection

(Using a translucent screen)

*The optional ceiling mount is required when installing the projector from a ceiling. Please contact your dealer if you wish

to use this method, as special equipment is required for installation. s "Optional Accessories" P.28

Rubber feet

(Attach In 3 places)

p

When using rear projection, or projecting from a ceiling, select the appropriate mode in the "Setting"

→

"Screen"

→

"Projection" configuration menu. s "Setting menu" P.14

10-Connecting a Computer

Connecting Equipment

Connecting a Computer

See the "Quick Reference Guide" for instructions on connecting to video equipment.

Compatible computers

fLaptop connection

Setup examples

Windows:

Press and hold the [Fn] key, followed by the appropriate

function number key.

Macintosh:

After start up enable "Mirroring" in the Monitors Control

Panel.

Refer to your computer’s documentation for further

details.

c

When connecting, be sure to:

• Turn off the power for both the projector and the computer.

Damage may result if you try to make a connection when the power is switched on.

• Check the connector types.

Damage may result if you attempt to insert a connector into the incorrect port.

Condition 1: Check that the computer has an image output port, such as an RGB port, monitor

port or CRT port.

Some computers with an in-built monitor and some laptop computers may not be compatible. Please

refer to your computer manual for further details.

Condition 2: The display frequency and resolution of the computer must correspond to that of the

projector. s "Supported Display Resolutions" P.26

p

You may need to purchase a separate adapter depending on the shape of the computer's port. Refer to the documentation

provided with the computer for further details.

p

When using a laptop or a computer with an in-built

monitor, select external video output on the computer.

NEC

[Fn]+[F3]

Panasonic

Toshiba

[Fn]+[F5]

IBM

[Fn]+[F7]

SONY

Fujitsu

[Fn]+[F10]

Win

Depending on your version of Windows, a dialog

box may appear to alert you that new display

hardware has been found. Follow the on-screen

instructions to proceed. If you have any

problems, please contact the nearest address

provided in the "International Warranty

Conditions" section in the "Safety Instructions /

World-Wide Warranty Terms" guide.

Win/

Mac

• It may take a few moments until the computer

image is projected.

• Depending on the computer, the monitor may

go blank when using the external video output

on the computer.

Connecting a Computer-11

Connecting Equipment

Outputting images and audio from a computer

Adjusting computer generated images

fAuto setup (Computer connections)

The computer signal is analysed and the following settings are adjusted to ensure the optimum image quality.

• Tracking

g

• Position

•Sync.

g

Adjust the Tracking and Sync settings manually if Auto setup cannot be performed. ([Menu] button → "Image" → "Picture

Quality" → "Tracking", "Sync.") s "Image menu" P.13

Computer cable (optional)

To monitor port To Input B

port

stereo mini jack

To audio out port

stereo mini jack - 2RCA cable

(commercially available)

To Audio port

RCA jack

p

When using computer and video equipment alternately, swap the cable or use an audio switch.

p

• You can set Auto setup to off in the "Image"

→

"Auto Setup" configuration menu. (The default is ON) s "Image menu"

P. 1 3

• When Auto setup is set to off, press the [Auto] button on the remote control to perform auto setup.

• If you press the [Auto] button during Freeze operation, or when a configuration menu is being displayed, the display will

be halted and auto setup will take place.

12-Menu operation

Configuration Menus

Menu operation

1

Press the [Menu] button.

The top configuration menu is displayed.

2

Press the [u] or [d] buttons to select

the Top Menu item.

3

Press the [e] button.

A Sub Menu is displayed.

4

Press the [u] or [d] buttons to select

the Sub Menu items, then press the

[e] button.

5

Settings can be changed in the

follwing ways:

(a)Press the [l] or [r] buttons to change the

setting values.

(b)Press the [u] or [d] buttons to select the

menu item.

Then press the [e] button.

(Green): Item currently set.

(Orange): Item currently selected.

Press the [e] button to confirm the

selection.

(c)Press the [l] or [r] buttons to select the

value.

Then, press the [e] button.

(d)Press the [u] [d] [l] [r] buttons to move

the image display position.

6

Set other items in the same way.

Press the [Esc] button to return to the previous

item or menu, or select "Return".

7

Press the [Menu] button to finish.

Top Menu

Sub Menu

p

The mark is displayed after items which perform a

setting or lead to a sub menu.

Function list-13

Function list

fImage menu

• The functions in the "Image" Menu will be different according to the type of signal which is being input.

• When no signal is being input, only the settings for "Auto Setup" can be adjusted.

Video (Video/S-Videog/Component)

RGB (RGB-Video/Analog RGB)

Sub menu Function

Picture

Quality

Brightness Adjusts the brightness of the image.

Contrast

g Adjusts the contrast of the image.

Sharpness Adjusts the sharpness of the image.

Saturation

(Video only)

Adjusts the colour depth.

Tint

(Video only)

(Adjustment is only possible when Component Video

g or NTSC signals are being input)

Adjusts the tint of the image.

Color

Temperatureg

Adjusts bright colours from a reddish tinge to a bluish tinge.

Lower colour temperature settings produce redder colours and softer colour tones.

Higher colour temperature settings produce bluer colours and sharper colour tones.

Flesh Tone Adjusts the green colour level.

The intensity of green tones becomes stronger when the adjustment value is high as does

the intensity of red/purple tones become stronger when the adjustment value is low.

Tracking

g

(RGB only)

Adjusts the image when vertical stripes appear in the image.

Sync.

g

(RGB only)

Adjusts the image when flickering, fuzziness or interference occur in the image.

Flickering and fuzziness may also occur when the brightness, contrast, sharpness or

keystone correction settings are adjusted.

Best results can be obtained by adjusting the tracking before the sync.

Color Mode Corrects the vividness of the image colour. The settings can be saved separately for each

type of source (computer or video).

Select from 4 different quality settings depending on the type of scene.

• Dynamic: Best for projecting video games. Vivid image quality can be enjoyed even in

bright places.

•Living Room: Best for projecting sports, etc. TV style image quality can be projected,

even in the living room.

•Theatre: Best for watching movies with a generally bright feel. The range of colours

are expressed vividly without lowering the luminosity of the lamp.

• Theatre Black: Best for watching movies in a pitch black environment. The luminosity

of the lamp is dropped and colours are expressed more subtly.

Memory Saves image adjustment values. Select "Memory1" or "Memory2" and press the [e]

button to save the current settings. You can recall the saved settings by pressing the

[Memory] button.

Auto Setup

(RGB only)

ON: When the input source is switched to a computer signal, the projector automatically

adjusts the image to its optimal state.

OFF: Auto Setup is disabled.

Reset Resets all the adjustment values within the "Image" menu (except for "Memory") to their

default settings.

• Press the [e] button and select "Yes" on the confirmation screen which is displayed.

• Select "All Reset" to restore all menu settings, such as image and sound, to their default

settings. s "Reset menu" P.15

14-Function list

Configuration Menus

fSetting menu

Sub menu Function

Screen Position Moves the image display position vertically and horizontally.

• Press the [e] button and adjust the display area on the Position adjustment screen which

is displayed.

Zoom

Caption

Adjustment is possible only when the Zoom aspect function has been selected.

• Vertical size : You can adjust the vertical size of the image.

• Zoom Position: You can adjust the vertical movement of the display position.

Keystone Corrects vertical keystone distortion in the image.

• The projected image changes when keystone correction is carried out.

• If the images become uneven in appearance after keystone correction has been carried

out, decrease the sharpness setting.

Projection • Front : Image is displayed, as is. No vertical/horizontal reversal performed.

• Front/Ceiling: The image is displayed vertically reversed.

• Rear : The image is displayed horizontally reversed.

• Rear/Ceiling : The image is displayed vertically and horizontally reversed.

Setup Level You can select one of two preset black levels.

(When the image source is an NTSC Video/S-Video signal, or when the image source has

been set to Input A, "Component".)

Operation Sleep Mode Sets the energy saving option for when no signal is being input.

• When a Sleep Mode interval has been set, the projector will enter Sleep Mode when no

operation has been carried out for the set time (5, 10 and 30 minutes). Projection will shut

down and the projector enters a standby state after cooling down. (The power indicator

lights orange).

• Projection starts again when the [Power] button is pressed on the projector's contol panel

or the remote control.

Child Lock Sets child lock to ON or OFF.

When child lock is set to "ON", the power will not come on unless you press and hold the

[Power] button on the control panel for at least 3 seconds. (The remote control functions as

normal.)

On Screen

Display

Message When set to "OFF", messages such as "No Signal.", and the name of the selected input

source or colour mode will no longer be displayed. Warning messages such as "Replace the

lamp" will continue to be displayed.

Background

Color

Sets the background colour to black or blue.

Startup

Screen

Sets whether or not the "EPSON" logo will be displayed during projector startup.

Input

Signal

Video

Signal

Selects the colour system of the video signal being input.

(Changes in signal format will only be noticeable when the input source is Video/S-Video.)

Input A You can switch between the sources connected to Input A.

• Component: YCbCr

g/YPbPrg

• RGB-Video: SCART

g, Sync on Green

Volume Adjusts the volume setting

Language Selects the language in which on-screen messages are displayed.

• Press the [e] button and select the desired language from the list which is displayed.

Reset Resets all the adjustment values within the "Setting" menu (except for "Child Lock",

"Input A" and "Language") to their default settings.

• Press the [e] button and select "Yes" on the confirmation screen which is displayed.

Function list-15

Configuration Menus

fInfo menu

fReset menu

Video/S-Video Input A/Input B

When component video is being input into the Input A port,

the Refresh Rate and Sync Info will not be displayed.

Sub menu Function

Lamp Hours Displays the cumulative lamp operating time. From 0 to 10 hours, 0H is displayed. After

10 hours, the usage time is displayed in hourly increments.

• When the accumulated usage time of the lamp reaches the appropriate time (*), a

warning will be displayed in red.

* If Theatre Black has been used continuously: About 2900 hours

If other modes have been used continuously: About 1900 hours

Source Displays the input source being projected.

Input Signal

(Input A/Input B only)

Displays the input signal settings.

Video Signal

(Video/S-Video only)

Displays the Video signal format.

Resolution

(Input A/Input B only)

Displays the input resolution.

(Does not appear when the input source is composite video or S-Video.)

Refresh Rate

g

(Input A/Input B only)

Displays the refresh rate

(Does not appear when the input source is composite video or S-Video.)

Sync Info

(Input A/Input B only)

Displays picture signal information.

In the event that you are having problems with your projector and need to contact an

EPSON dealer, please quote the information displayed on this screen.

Sub menu Function

Lamp-Hours

Reset

Resets the lamp operating time. When this command is selected, the cumulative lamp operating

time is reset to the default value.

Memory Reset Resets all settings stored in Memory.

All Reset Resets all items in the configuration menus to their default settings.

• Press the [e] button and select "Yes" on the confirmation screen which is displayed.

• Select "Reset" in an individual menu to reset only the settings for the items in that sub menu.

• "Memory", "Child Lock", "Input A", "Language" and "Lamp Hours" settings will not be reset.

16-When You Suspect a Problem

Troubleshooting

When You Suspect a Problem

First, check the indicators on the projector.

There are two indicators on the projector unit

which notify you of projector conditions.

Power indicator

lit flashing •If the indicator is not lit, the power supply is not on.

Warning indicator

lit flashing •Not lit under normal operating conditions.

Condition Cause/Remedy s

Orange

Standby state (Not abnormal)

The power cable should only be disconnected when the projector is in this state.

Press the [Power] button to start projection.

Quick

Reference

Guide

Orange

Cool-downg in progress (Not abnormal)

• Please wait. The cool-down period lasts about 20 seconds.

• You cannot operate the [Power] button during the cool-down period. Press the power button

again after cool-down has finished.

Green

Projection in progress (Not abnormal)

Green

Warming-up (Not abnormal)

Please wait. Warming up takes about 40 seconds. When warming up is complete, the indicator

changes to steady green.

Condition Cause/Remedy s

Red

High internal temperature (overheating)

The lamp turns off automatically and projection stops. Wait for about 5 minutes without operating

the projector. After about 5 minutes have passed, unplug the power cable and check the following:

• Make sure the air filter and ventilation outlet are clear and that the projector is not positioned

against a wall.

• If the air filter is dirty, it should be cleaned.

When the power cable is plugged back in, the projector will return to its previous state. Press the

[Power] button on the projector or on the remote control to turn it back on.

P.8

P.2 0

Red

(0.5 second

interval)

Lamp problem

• Disconnect the power cable from the electrical outlet. Remove the lamp and check that it is not

broken. If the lamp is not broken, re-install it. Reconnect the power cable and press the [Power]

button on the projector or the remote control to turn it back on.

• If the lamp is broken, please contact your dealer or the nearest address provided in the

"International Warranty Conditions" in the "Safety Instructions/World-Wide Warranty Terms"

guide (You will not be able to use the projector until the lamp is replaced).

• Check that the lamp and lamp cover are securely installed. If the lamp or lamp cover are not

securely installed, the lamp will not switch on.

P.2 2

Red

(1 second

interval)

Internal problem

Stop using the projector, disconnect the power cable from the electrical outlet and contact your

dealer or the nearest address provided in the "International Warranty Conditions" in the "Safety

Instructions/World-Wide Warranty Terms" guide.

Orange

High-speed cooling in progress

(This is not abnormal, but, if the temperature rises too high again, projection will stop

automatically.)

Set up the projector in a place which is well ventilated and ensure the air filter and ventilation

outlet are clear.

Clean the air filter.

P.8

P.2 0

Power indicator

Warning indicator

When You Suspect a Problem-17

Troubleshooting

When the indicators provide no help

fNo images appear (Nothing is displayed)

fNo images appear (Messages are displayed)

p

• If problems with projection do occur, but the indicators do not show any abnormal conditions, please refer to the section

below, "When the indicators provide no help".

• If a condition occurs which is not listed in this table, please consult your dealer or contact the nearest address provided in

the "International Warranty Conditions" in the "Safety Instructions/World-Wide Warranty Terms" guide.

• If you follow the above steps and are still unable to correct the problem, please cease using the projector, unplug the

projector from the electrical outlet and request repairs from your dealer or nearest address provided in the "International

Warranty Conditions" in the "Safety Instructions/World-Wide Warranty Terms" guide.

• Was the power turned off

and then straight back on

again?

You cannot begin projecting again for at least a minute

after projection has been stopped, even if you press the

[Power] button on the control panel or remote control.

Allow the projector to cool-down completely before

projecting again.

• Has a Sleep Mode interval

(5, 10 or 30 minutes) been

set?

When a Sleep Mode interval has been set, the lamp cuts

out after no operations have been carried out for the set

time (5, 10 or 30 minutes).

The power indicator lights orange at this time.

• Has the image brightness

been adjusted correctly?

Adjust the brightness in the following way.

[Menu] button → "Image" → "Picture Quality" →

"Brightness".

• Is the projected image

completely black?

Some images being displayed, including some screen

savers, may be completely black.

• Is an image signal being

input?

Check if a picture signal is being input.

Set the "Message" option to "ON" in the "Setting" →

"On Screen Display" → "Message" configuration menu, in

order to view the picture signal information.

"No Signal."

• Is the input source

properly selected?

Press the [Source] button on the Control panel until the

correct input source is selected. For the remote control,

press the [Input A/B] button or the [S-Video/Video]

button.

• Are the cables connected

properly?

Check that the cables are securely connected.

Depending on the equipment you are using, some settings

may need to be made on the video equipment. Refer to the

User's guide of your video equipment.

• Has external video output

been selected on the

computer?

When using a laptop or a PC with an in-built monitor,

select external video output on the computer.

s "Laptop connection" P.10

18-When You Suspect a Problem

Troubleshooting

fImage is out of focus (unclear)

fImage is distorted / Image contains interference

fOnly part of the image is displayed (large/small)

fImage colours are poor, tinted green or tinted red/purple

• The image is fuzzy

• Part of the image is

out of focus

• The whole image

is out of focus

• Is the projector at the

correct distance from the

screen?

The optimum range for projection is 73-1165cm (2.4-

38.2ft.). Set the projector within this range.

s "Installation method" P.8

• Is the lens dirty? s "Cleaning the lens" P.20

• Has condensation formed

on the lens?

If the projector is suddenly taken from a cold environment

to a warm environment, condensation may form on the

surface of the lens, and this may cause the images to

appear fuzzy. Set the projector up in the room in which it

is to be used approximately one hour before use. If

condensation forms on the lens, turn off the power and

wait for the condensation to disappear.

• Has the focus been

correctly adjusted?

Turn the focus ring to adjust the focus.

• Is an extension cable

being used?

If using an extension cable, electrical interference may

affect the signals.

• Are the cables connected

correctly?

Check that the cables are securely connected.

Interference may occur if the cables are not connected

securely.

• Is the aspect ratio set

correctly?

Press the [Aspect] button to change the aspect ratio.

s "Changing aspect ratio" Quick Reference Guide

• Has the "Position" been

adjusted correctly?

Use the "Setting" → "Screen" → "Position"

configuration menu to correctly adjust the display

position.

• Does the lamp need

replacement?

When the lamp is due for replacement, colours will

weaken and the image will become dark. Replace the lamp

when this is the case. s "Lamp replacement period" P.22

• Adjust each of the settings

in the following menus.

[Menu] button → "Image"

→ "Picture Quality"

"Contrast", "Color Temperature"

"Saturation", "Tint", "Brightness"

• Are the cables connected

correctly?

If cables connecting to component video equipment are

not connected securely, certain colours may not be

displayed.

La page est en cours de chargement...

Epson EMP-TW10 Le manuel du propriétaire

Epson EMP-TW10 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents