EGO BCA1220 Cordless Multi Tool System Manuel utilisateur

BRUSH CUTTER ATTACHMENT

OPERATOR'S MANUAL

BRUSH CUTTER

ATTACHMENT

MODEL NUMBER BCA1220/BCA1220-FC

WARNING: To reduce the risk of injury, the user must read and understand the

Operator’s Manual before using this product. Save these instructions for future reference.

Español p. 71

Français p. 35

EXCLUSIVELY FOR USE WITH EGO POWER HEAD

PH1400/PH1400-FC/PH1420/PH1420-FC

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC2

TABLE OF CONTENTS

Safety Symbols ..........................................4

Safety Instructions .....................................5-13

Introduction ............................................14

Specications ..........................................14

Packing List ............................................15

Recommendmended accessories ...........................15

Description .........................................16-17

Assembly ...........................................18-24

Operation ...........................................25-28

Maintenance ........................................29-31

Troubleshooting .........................................32

Warranty ...........................................33-34

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 3

READ ALL INSTRUCTIONS!

READ & UNDERSTAND

OPERATOR'S MANUAL

WARNING: Some dust created by power sanding, sawing, grinding, drilling

and other construction activities contains chemicals known to the state of California

to cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

◾Lead from lead-based paints

◾Crystalline silica from bricks and cement and other masonry products, and

◾Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these chemicals: work in a well ventilated area, and

work with approved safety equipment, such as those dust masks that are specially

designed to ﬁlter out microscopic particles.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC4

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger. The

instructions and warnings they give are no substitutes for proper accident prevention

measures.

WARNING: Be sure to read and understand all safety instructions in this

Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”

and “CAUTION” before using this machine. Failure to following all instructions listed

below may result in electric shock, ﬁre, and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. May

be used in conjunction with other symbols or pictographs.

WARNING! The operation of any machines can result in foreign

objects being thrown into your eyes, which can result in severe eye

damage. Before beginning machine operation, always wear safety

goggles or safety glasses with side shield and a full face shield when

needed. We recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields. Always use eye protection

which is marked to comply with ANSI Z87.1.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 5

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read,

understand, and follow all instructions on the machine before attempting to assemble

and operate it.

Safety Alert Indicates a potential personal injury

hazard.

Read & Understand

Operator’s Manual

To reduce the risk of injury, user

must read and understand operator’s

manual before using this product.

Wear Eye Protection

Always wear safety goggles or

safety glasses with side shields and

a full face shield when operating this

product.

Wear Ear Protection

Always wear sound barriers (ear plugs

or ear mufﬂers) to protect your hear-

ing.

Wear Head Protection Wear an approved safety hard hat to

protect your head.

Wear Hand Protection

Protect your hands with gloves when

handling brush cutter and its blade.

Heavy-duty, nonslip gloves improve

your grip and protect your hands.

Wear Slip-resistant

Footwear

Wear non-slip safety footwear when

using this equipment.

Beware of Blade Thrust Warn the operator of the danger of

blade thrust.

Disconnect Battery Before

Maintenance

Alerts user to disconnect battery

before maintenance.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC6

Beware of Thrown Objects Thrown objects can ricochet and result

in personal injury or property damage.

15 m(50 ft)

The distance between the

machine and bystanders

shall be at least

15 m (50 ft)

Ensure that other people and pets

remain at least 50 ft (15 m) away from

the brush cutter when it is in use.

Recycle Symbol

This product uses lithium-ion (Li-ion)

batteries. Local state, or federal laws

may prohibit disposal of batteries in

ordinary trash. Consult your local waste

authority for information regarding

available recycling and/or disposal

options.

IPX4 Ingress Protection Degree Protection from splashing water.

mm Millimeter Length or size

cm Centimeter Length or size

in. Inch Length or size

Ft. Feet Length or size

kg Kilogram Weight

lb. Pound Weight

OFFahrenheit Temperature

OCdegree Celsius Temperature

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 7

GENERAL MACHINE SAFETY WARNINGS

WARNING: Read all safety warnings, instructions, illustrations and

specications provided with this machine. Failure to follow all instructions listed

below may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term “machine” in the warnings refers to your mains-operated (corded) machine or

battery-operated (cordless) machine.

WORK AREA SAFETY

◾Keep work area clean and well lit. Cluttered or dark areas invite accidents.

◾Do not operate machines in explosive atmospheres, such as in the presence

of ammable liquids, gases or dust. Machines create sparks which may ignite

the dust or fumes.

◾Keep children and bystanders away while operating a machine. Distractions

can cause you to lose control.

ELECTRICAL SAFETY

◾Machine plugs must match the outlet. Never modify the plug in any way. Do

not use any adapter plugs with earthed (grounded) machines. Unmodiﬁed

plugs and matching outlets will reduce risk of electric shock.

◾Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

◾Do not operate the machine in rain or wet conditions. Water entering the

machine may increase the risk of electric shock or malfunction that could result

in personal injury.

◾Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the machine. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

◾When operating a machine outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

◾If operating a machine in a damp location is unavoidable, use a ground fault

circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of

electric shock.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC8

PERSONAL SAFETY

◾Stay alert, watch what you are doing and use common sense when

operating a machine. Do not use a machine while you are tired or under

the inuence of drugs, alcohol or medication. A moment of inattention while

operating machines may result in serious personal injury.

◾Use personal protective equipment. Always wear eye protection. Protective

equipment such as a dust mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce personal injuries.

◾Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to the power source and/or the battery pack, picking up

or carrying the machine. Carrying machines with your ﬁnger on the switch or

energizing machines that have the switch on invites accidents.

◾Remove any adjusting key or wrench before turning the machine on. A

wrench or a key left attached to a moving part of the machine may result in

personal injury.

◾Do not overreach. Keep proper footing and balance at all times. This enables

better control of the machine in unexpected situations

◾Dress properly. Do not wear loose clothing or jewelry. Keep your hair and

clothing away from moving parts. Loose clothes, jewelry or long hair can be

caught in moving parts.

◾If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust devices

can reduce dust-related hazards.

◾Do not let familiarity gained from frequent use of machines allow you to

become complacent and ignore machine safety principles. A careless action

can cause severe injury within a fraction of a second.

MACHINE USE AND CARE

◾Do not force the machine. Use the correct power machine for your

application. The correct machine will do the job better and safer at the rate for

which it was designed.

◾Do not use the machine if the switch does not turn it on and off. Any machine

that cannot be controlled with the switch is dangerous and must be repaired.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 9

◾Disconnect the plug from the power source and/or remove the battery pack,

if detachable, from the machine before making any adjustments, changing

accessories, or storing machines. Such preventive safety measures reduce the

risk of starting the machine accidentally.

◾Store idle machines out of the reach of children and do not allow persons

unfamiliar with the machine or these instructions to operate the machine.

machines are dangerous in the hands of untrained users.

◾Maintain machines and accessories. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that may affect

the machine’s operation. If damaged, have the machinerepaired before use.

Many accidents are caused by poorly maintained machines and accessories.

◾Keep cutting machines sharp and clean. Properly maintained cutting machines

with sharp cutting edges are less likely to bind and are easier to control.

◾Use the power machine, accessories, machine bits, etc. in accordance with

these instructions, taking into account the working conditions and the work

to be performed. Use of the machine for operations different from those intended

could result in a hazardous situation.

◾Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not allow for safe handling and control

of the machine in unexpected situations.

BATTERY MACHINE USE AND CARE

◾Recharge only with the charger specied in the PH1400/PH1400-FC/

PH1420/PH1420-FC manual. A charger that is suitable for one type of battery

pack may create a risk of ﬁre when used with another battery pack.

◾Use machines only with specically designated battery packs. Use of any

other battery packs may create a risk of injury and ﬁre.

◾When battery pack is not in use, keep it away from other metal objects, like

paper clips, coins, keys, nails, screws or other small metal objects, that

can make a connection from one terminal to another. Shorting the battery

terminals together may cause burns or a ﬁre.

◾Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, ush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected from the battery may

cause irritation or burns.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC10

◾Do not use a battery pack or machine that is damaged or modied.

Damaged or modiﬁed batteries may exhibit unpredictable behavior resulting in

ﬁre, explosion or risk of injury.

◾Do not expose a battery pack or machine to re or excessive temperature.

Exposure to ﬁre or temperature above 265°F (130°C) may cause explosion.

◾Follow all charging instructions and do not charge the battery pack or

machine outside the temperature range specied in the instructions.

Charging improperly or at temperatures outside the speciﬁed range may damage

the battery and increase the risk of ﬁre.

SERVICE

◾Have your machine serviced by a qualied repair person using only

identical replacement parts. This will ensure that the safety of the machine is

maintained.

◾Never service damaged battery packs. Service of battery packs should only be

performed by the manufacturer or authorized service providers.

BRUSH CUTTER SAFETY WARNINGS

◾Do not use the machine in bad weather conditions, especially when there is

a risk of lightning. This decreases the risk of being struck by lightning.

◾Thoroughly inspect the area for wildlife where the machine is to be used.

Wildlife may be injured by the machine during operation.

◾Thoroughly inspect the area where the machine is to be used and remove

all stones, sticks, wires, bones, and other foreign objects. Thrown objects can

cause personal injury.

◾Before using the machine, always visually inspect to see that the cutter or

blade and the cutter or blade assembly are not damaged. Damaged parts

increase the risk of injury.

◾Follow instructions for changing accessories. Improperly tightened blade

securing nuts or bolts may either damage the blade or result in it becoming

detached.

◾The rated rotational speed of the blade must be at least equal to the

maximum rotational speed marked on the machine. Blades running faster

than their rated rotational speed can break and ﬂy apart.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 11

◾Wear eye, ear, head and hand protection. Adequate protective equipment will

reduce personal injury by ﬂying debris or accidental contact with the cutting line

or blade.

◾While operating the machine, always wear non-slip and protective footwear.

Do not operate the machine when barefoot or wearing open sandals. This reduces

the chance of injury to the feet from contact with a moving cutter, line or blade.

◾While operating the machine, always wear long trousers. Exposed skin

increases the likelihood of injury from thrown objects.

◾Keep bystanders away while operating the machine. Thrown debris can result

in serious personal injury.

◾Always use two hands when operating the machine. Holding the machine

with both hands will avoid loss of control.

◾Hold the machine by the insulated gripping surfaces only, because the

cutting line or blade may contact hidden wiring. Cutting line or blades

contacting a "live" wire may make exposed metal parts of the machine "live" and

could give the operator an electric shock.

◾Always keep proper footing and operate the machine only when standing on

the ground. Slippery or unstable surfaces may cause a loss of balance or control

of the machine.

◾Do not operate the machine on excessively steep slopes. This reduces the

risk of loss of control, slipping and falling which may result in personal injury.

◾When working on slopes, always be sure of your footing, always work

across the face of slopes, never up or down and exercise extreme caution

when changing direction. This reduces the risk of loss of control, slipping and

falling which may result in personal injury.

◾Keep all parts of the body away from the cutter, line or blade when the

machine is operating. Before you start the machine, make sure the cutter,

line or blade is not contacting anything. A moment of inattention while

operating the machine may result in injury to yourself or others.

◾Do not operate the machine above waist height. This helps prevent unintended

cutter or blade contact and enables better control of the machine in unexpected

situations.

◾When cutting brush or saplings that are under tension, be alert for spring

back. When the tension in the wood ﬁbers is released, the brush or sapling may

strike the operator and/or throw the machine out of control.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC12

◾Use extreme caution when cutting brush and saplings. The slender material

may catch the blade and be whipped toward you or pull you off balance.

◾Maintain control of the machine and do not touch cutters, lines or blades

and other hazardous moving parts while they are still in motion. This reduces

the risk of injury from moving parts.

◾Carry the machine with the machine switched off and away from your body.

Proper handling of the machine will reduce the likelihood of accidental contact

with a moving cutter, line or blade.

◾When transporting or storing the machine, always t the cover on metal

blades. Proper handling of the machine will reduce the likelihood of accidental

contact with the blade.

◾Only use replacement cutters, lines, cutting heads and blades specied by

the manufacturer. Incorrect replacement parts may increase the risk of breakage

and injury.

◾When clearing jammed material or servicing the machine, make sure the

switch is off and the battery pack is removed. Unexpected starting of the

machine while clearing jammed material or servicing may result in serious

personal injury.

BLADE THRUST CAUSES AND RELATED WARNINGS

Blade thrust is a sudden sideways, forward or backward motion of the machine, which

may occur when the blade jams or catches on an object such as a sapling or a tree

stump. It can be violent enough to cause the machine and/or operator to be propelled in

any direction, and possibly lose control of the machine.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 13

Blade thrust and its related hazards can be avoided by taking proper precautions as

given below.

◾Maintain a rm grip with both hands on the machine and position your

arms to resist blade thrust. Position your body to the left side of the

machine. Blade thrust can increase the risk of injury due to the machine moving

unexpectedly. Blade thrust can be controlled by the operator if proper precautions

are taken.

◾If the blade binds, or when interrupting a cut for any reason, switch the

machine off and hold the machine motionless in the material until the blade

comes to a complete stop. While the blade is binding, never attempt to

remove the machine from the material or pull the machine backward while

the blade is in motion, otherwise blade thrust may occur. Investigate and take

corrective actions to eliminate the cause of blade binding.

◾Do not use blunt or damaged blades. Blunt or damaged blades increase the

risk of jamming or catching on an object, resulting in blade thrust.

◾Always maintain good visibility of the material being cut. Blade thrust is more

likely to occur in areas where it is difﬁcult to see the material being cut.

◾If you are approached by another person while operating the machine,

switch the machine off. There is an increased risk of injury to other persons

being struck by the moving blade in the event of blade thrust.

NOTE: SEE YOUR POWER HEAD OPERATOR’S MANUAL FOR

ADDITIONAL SPECIFIC SAFETY RULES.

SAVE THESE INSTRUCTIONS!

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC14

INTRODUCTION

Congratulations on your selection of the BRUSH CUTTER ATTACHMENT. It has been

designed, engineered and manufactured to give you the best possible dependability

and performance.

Should you experience any problem you cannot easily remedy, please contact EGO

customer service center 1-855-EGO-5656.

This manual contains important information on the safe assembly, operation and

maintenance of your product. Read it carefully before using the product. Keep this

manual handy so you can refer to it at any time.

SERIAL NUMBER _____________________ DATE OF PURCHASE _________________

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE

PLACE FOR FUTURE REFERENCE.

SPECIFICATIONS

Cutting Unit 3-tooth metal blade

Cutting Width 12 in. (30 cm)

Maximum Speed 6000 rpm

Weight (w/ blade sheath) 3.88 lb.(1.76 kg)

Recommended Operating Temperature 32 °F – 104 °F (0 °C-40 °C)

Recommended Storage Temperature -4 °F – 158 °F (-20 °C-70 °C)

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 15

PACKING LIST

PART NAME QUANTITY

Brush Cutter Attachment 1

Blade and Blade Sheath Set 1

Guard 1

Barrier Bar 1

New Quick-release Lever (For use with barrier bar only) 1

4 mm Hex Key 1

Multi-function Wrench 1

Operator’s Manual 1

RECOMMENDED ACCESSORIES

PART NAME MODEL NUMBER

Brush Cutter Blade ABB1203

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC16

DESCRIPTION

KNOW YOUR BRUSH CUTTER ATTACHMENT (Fig. 1)

The safe use of this product requires an understanding of the information on the machine

and in this operator’s manual, as well as knowledge of the project you are attempting.

Before using this product, familiarize yourself with all operating features and safety rules.

1

End Cap

Brush Cutter Shaft

Multi-function Wrench

Gear Case

Shaft-locking Hole

Outer Flange

Sealing Screw

Guard

3-tooth Metal Blade

Blade Sheath

Clamp Wire

Barrier bar

New Quick-release Lever

4mm Hex Key

WARNING: Never operate the machine without the guard ﬁrmly in place. The

guard must always be on the machine to protect the user.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 17

END CAP

keeps the inside the attachment shaft clean whenever it is not connected to the power

head.

GUARD

Reduces the risk of injury from foreign objects ﬂung backwards toward the operator

and from contact with the cutting attachment.

BARRIER BAR

Helps to protect operator from injury during use of the brush cutter attachment.

BLADE SHEATH

The blade sheath keeps the operator from coming in contact with the sharp blade when

the machine is not in use. It also helps keep the brush cutter blade from being nicked

or damaged when the machine is being transported or stored.

3-TOOTH METAL BLADE

Cutting accessory for brush cutting.

CLAMP WIRE

Secures the blade sheath on the blade.

SEALING SCREW

For convenient gear lubrication in the gear case.

MULTI-FUCTION WRENCH

Required for blade replacement.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC18

ASSEMBLY

WARNING: If any parts are damaged or missing, do not operate this

product until the parts are replaced. Use of this product with damaged or missing

parts could result in serious personal injury.

WARNING: Do not attempt to modify this product or create accessories not

recommended for use with this brush cutter. Any such alteration or modiﬁcation is

misuse and could result in a hazardous condition leading to possibly serious personal

injury.

WARNING: Always wear heavy gloves when installing or removing the

blade or the guard or doing any maintenance on the blade. Be careful of the blade

and protect your hands from being injured by the blade.

WARNING: Do not connect to power head until assembly is complete.

Failure to comply could result in accidental starting and possible serious personal

injury.

UNPACKING

◾This product requires assembly.

◾Carefully remove the product and any accessories from the box. Make sure that

all items listed in the packing list are included.

WARNING: Do not use this product if any parts on the Packing List are already

assembled to your product when you unpack it. Parts on this list are not assembled to

the product by the manufacturer and require customer installation. Use of a product

that may have been improperly assembled could result in serious personal injury.

◾Inspect the machine carefully to make sure that no breakage or damage occurred

during shipping.

◾Do not discard the packing material until you have carefully inspected and

satisfactorily operated the machine.

◾If any parts are damaged or missing, please return the product to the place of

purchase.

NOTICE: The correct assembly sequence of the brush cutter attachment is mounting

the guard ﬁrst, and then the blade, and ﬁnally attaching it to the power head.

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 19

WARNING: Never operate the machine without the guard and the front handle

with barrier bar ﬁrmly in place. Failure to comply could result in possible serious

personal injury.

MOUNTING THE GUARD

1. Loosen the two screws in the

guard with the supplied hex key,

and remove the screws and spring

washers from the guard (Fig. 2).

2. Align the guard mounting holes with

assembly holes and then secure the

guard onto the shaft base with the

two screws and two spring washers

(Fig. 3).

WARNING: Make sure the guard is

mounted according to Fig. 2 & 3. Incorrect

mounting of the guard will cause great

danger!

MOUNTING THE BLADE

1. The blade is shipped with a sheath.

Before mounting the blade onto the

brush cutter, the sheath should be

removed by undoing the clamp wire

from the loop on the sheath (Fig. 4).

2

3

4

Clamp Wire

Blade Sheath Blade

Loop

BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC20

2. Rotate the outer ﬂange to align the

slot in the inner ﬂange with the

shaft-locking hole in the gear case

(Fig. 5).

3. Insert the included hex key into the

aligned holes to act as a stabilizer

(Fig. 6).

4. Position the gear case against a

solid surface for support. Use one

hand to grasp the brush cutter shaft

and the other hand to loosen the

nut in the direction of the arrow

marked on the outer ﬂange, using

the included multi-function wrench.

Remove the nut and the outer ﬂange

and save them for reassembly

(Fig. 7).

5. Mount the blade onto the motor

shaft, ensuring that the surface

of the blade is ﬂush with the

surface of the inner ﬂange bulge

(Fig. 8). Pre-tighten the nut in

COUNTERCLOCKWISE direction by

hand.

6. Rotate the outer ﬂange to align the

slot in the inner ﬂange with the

shaft-locking hole in the gear case

and insert the included hex key

into the aligned holes to act as a

stabilizer as shown in previous steps

2 and 3.

7

5Outer Flange

Gear Case

Aligned Shaft-locking Holes

6Stabilizer (Hex Key)

8

Nut

Outer Flange

Motor ShaftInner Flange

Bulge

Blade

La page charge ...

EGO BCA1220 Cordless Multi Tool System Manuel utilisateur

EGO BCA1220 Cordless Multi Tool System Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents