Moog Videolarm FCH11C2W Mode d'emploi

Marque: Moog Videolarm

Modèle: FCH11C2W

Catégorie: Accessoires de caméra de sécurité

Taper: Mode d'emploi

www.moogvideolarm.com

F C H S e r i e s

Rugged Environmental Camera Enclosure Housings

Installation and Operation Instructions for the following models:

FCH11CW Environmental housing with feed-thru wall / pole mount

FCH11C2W Environmental housing with feed-thru wall / pole mount,

24Vac or 12Vdc input, heater/ blower

FCH11C2WY Environmental housing with feed-thru wall / pole mount,

24Vac or 12Vdc input, heater / blower, adjustable sunshield

FCH11C8WY Environmental housing with feed-thru wall/pole mount, dynamic power

allocation PoE input, 30 watt midspan included, heater & blower, supports .at

PoE cameras, adjustable sunshield

FCH11C2WQ Environmental housing with heat exchanger, feed-thru wall / pole mount,

24Vac or 12Vdc input, heater & blower

FCH11C8WQ Environmental housing with heat exchanger, feed-thru wall / pole mount,

dynamic power allocation PoE input, 30 watt midspan included,

heater & blower, sunshield, supports .at PoE cameras

Before attempting to connect or operate this product, please read these instructions completely.

81-IN5484

02-29-2012

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. The installation should be made by a qualied installer.

b. The installation should be in compliance with local codes.

c. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including ampliers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specied by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Be sure to periodically examine the unit and the supporting structure to make sure that the integrity

of the installation is intact. Failure to comply with the foregoing could result in the unit separating

from the support structure and falling, with resultant damages or injury to anyone or anything struck

by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make future

shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us at

the following number:

The lightning ash with an arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of non-insulated

“dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk to persons.

Este símbolo se piensa para alertar al usuario a la presencia

del “voltaje peligroso no-aisIado” dentro del recinto de los

productos que puede ser un riesgo de choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la presence

“de la tension dangereuse” non-isolée dans la clôture de

produits qui peut être un risque de choc électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença “di

tensão perigosa non-isolada” dentro do cerco dos produtos

que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla presenza

“di tensione pericolosa” non-isolata all’interno della

recinzione dei prodotti che può essere un rischio di scossa

elettrica

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones importantes

en la literatura que acompaña la aplicación.

Ce symbole de point d’exclamation est prévu pour alerter

l’utilisateur à la presence des instructions importantes dans

la littérature accompagnant l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der Literatur

alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido alertar o

usuário à presença de instruções importantes na literatura

que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti nella

letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800 - 554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING

TO QUALIFIED SERVICE PERSONNEL.

Limited Warranty for Moog Videolarm Products

Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:

PRODUCT CATEGORY PARTS \ LABOR

All Enclosures and Electronics* Five (5) Years

Poles/PolEvators™/CamEvator Three (3) Years

Warrior Series™/Q-View™/IR Illuminators Five (5) Years

SView Series™ Five (5) Years **6 months if used in auto scan/tour operation

Controllers Five (5) Years

Power Supplies Five (5) Years

EcoKit Three (3) Years

Accessory Brackets Five (5) Years

Liberty Dome Three (3) Years

*DeputyDome™, NiteTrac™, Igloo Dome, PurgeDome™ Three (3) Years **6 months if used in auto scan/tour operation

During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Moog Videolarm

Inc. Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with

a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support

Team at 800.554.1124, extension 101. Moog Videolarm will return the repaired Product freight prepaid to Purchaser. Moog Videolarm is not obligated to

provide Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or

parts charges.

The limited warranty stated in these product instructions is subject to all of the following terms and conditions.

TERMS AND CONDITIONS

1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice with an

explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.

If after investigation Moog Videolarm determines the reported problem was not covered by the warranty, Purchaser shall pay Moog Videolarm for the cost of

investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period

of the entire Product. The speci c warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that

part or the remaining period of the Product parts warranty, whichever is greater.

2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Moog Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair any

Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.

3. EXCEPTIONS TO LIMITED WARRANTY: Moog Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during the

warranty period which is subjected to any of the following: abuse, improper use, negligence, accident, lightning damage or other acts of God (i.e., hurricanes,

earthquakes), modi cation, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance

procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the

Product. Furthermore, Moog Videolarm shall have no liability where a schedule is speci ed for regular replacement or maintenance or cleaning of certain parts

(based on usage) and the end-user has failed to follow such schedule; attempted repair by non-quali ed personnel; operation of the Product outside of the

published environmental and electrical parameters, or if such Product’s original identi cation (trademark, serial number) markings have been defaced, altered,

or removed. Moog Videolarm excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not

been sold by Moog Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS”

(i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. Any

cost associated with removal of defective product and installation of replacement product is not included in this warranty.

4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.

DISCLAIMER OF WARRANTY

EXCEPT FOR THE FOREGOING WARRANTIES, Moog Videolarm HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR

ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL

CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. Moog Videolarm HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT

THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-Moog Videolarm PRODUCTS OR NON-Moog Videolarm RECOMMENDED PRODUCTS

PURCHASER MAY CHOOSE TO CONNECT TO THE PRODUCT.

LIMITATION OF LIABILITY

THE LIABILITY OF Moog Videolarm, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND

WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL

PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL Moog Videolarm BE LIABLE TO PURCHASER

FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION,

REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.

Contents of Box

* NOT included with E or 12V models

24Vac: 26 watts Heater (25 watts), Blower (1 watt)

12Vdc: 10 watts Heater (9 watts), Blower (1 watt)

PoE: IEEE802.at

Camera Power:

Tools Required: .100” Flat head screwdriver

Phillips head screwdriver

24Vac: 26 vatios Calentador (25 vatios), soplador (1 vatio)

12Vdc: 10 vatios Calentador (9 vatios), soplador (1 vatio)

PoE: IEEE802.at

Energía de la cámara:

Herramientas requeridas: .100” destornillador principal plano

Destornillador principal Phillips

24Vac: 26 watts Réchauffeur (25 watts), ventilateur (1 watt)

12Vdc: 10 watts Réchauffeur (9 watts), ventilateur (1 watt)

PoE : IEEE802.at

Puissance d'appareil-photo:

Outils requis : .100 » tournevis principal plat Tournevis phillips

24Vac: 26 Watt Heizung (25 Watt), Gebläse (1 Watt)

12Vdc: 10 Watt Heizung (9 Watt), Gebläse (1 Watt)

PoE: IEEE802.at

Kamera-Energie:

Werkzeuge erfordert: .100“ acher Hauptschraubenzieher

Kreuzkopfschraubenzieher

24Vac: 26 watts Calefator (25 watts), ventilador (1 watt)

12Vdc: 10 watts Calefator (9 watts), ventilador (1 watt)

Ponto de entrada: IEEE802.at

Ferramentas exigidas: .100” chave de fenda principal lisa Chave de

fenda principal de Phillips

24Vac: 26 watt Riscaldatore (25 watt), ventilatore (1 watt)

12Vdc: 10 watt Riscaldatore (9 watt), ventilatore (1 watt)

PoE: IEEE802.at

Potere della macchina fotograca:

Gli attrezzi hanno richiesto: .100„ cacciaviti capi piani Cacciavite phillips

No Electronics

Ninguna electrónica

Aucune électronique

Keine Elektronik

Nenhuma eletrônica

Nessun'elettronica

FCH11C2W / FCH112WY / FCH11C8WY

FCH11CW

OUTDOOR and PoE MODELS:

Indoor Model:

External blower adds 3.5W to the

Outdoor / PoE specications

El soplador externo agrega 3.5W a las

especicaciones al aire libre/del PoE

Le ventilateur externe ajoute 3.5W aux

caractéristiques extérieures/PoE

Externes Gebläse fügt 3.5W den im

Freien/PoE-Spezikationen hinzu

O ventilador externo adiciona 3.5W às

especicações ao ar livre/ponto de

entrada

Il ventilatore esterno aggiunge 3.5W

alle speciche PoE/esterne

FCH11C8WQ and FCH11C2WQ

Thermiq Models:

Français

FCH11 Series

Electrical Specifications

Power 24Vac / 12Vdc

Class 2 Only

Deutsch

Italiano

Portuguese

Español

English

Français

Deutsch

Italiano

Portuguese

Español

English

Français

Deutsch

Italiano

Portuguese

Español

English

If you are running a conduit to the housing, rst

install the appropriate tting to the wall mount.

• Si usted está funcionando con un conducto a la cubierta, primero instale

la guarnición apropiada al montaje de la pared.

• Si vous courez un conduit au logement, installez d'abord l'ajustage de

précision approprié sur le bâti de mur.

• Wenn Sie ein Rohr zum Gehäuse laufen lassen, bringen Sie zuerst die

passende Befestigung zur Wandeinfassung an.

• Se você está funcionando uma canalização à carcaça, instale

primeiramente o encaixe apropriado à montagem da parede.

• Se stiate facendo funzionare un condotto all'alloggiamento, in primo

luogo installi il montaggio adatto al supporto della parete.

Attach mount to wall with suitable hardware

(not provided).

• Ate el montaje a la pared con el hardware conveniente

(no proporcionado).

• Attachez le bâti au mur avec le matériel approprié (non fourni).

• Bringen Sie Einfassung zur Wand mit der verwendbaren Hardware an

(nicht bereitgestellt).

• Una a montagem à parede com a ferragem apropriada (não fornecida).

• Attacchi il supporto alla parete con ssaggi adatti (non forniti).

WALL MOUNTING

If attaching to pole, rst break away tabs with pliers and

remove (4) strap plugs.

• Si atan al poste, el primeros rompen lejos lengüetas con los alicates

y quitan (4) los enchufes de la correa.

• Si attachant au poteau, les premiers cassent loin des étiquettes avec

des pinces et enlèvent (4) des prises de courroie.

• Bei der Befestigung zum Pfosten, brechen erste weg Vorsprünge mit

Zangen und entfernen (4) Bügelstecker.

• Se unindo ao pólo, o primeiros quebram afastado abas com alicates

e removem (4) plugues da cinta.

• Se attaccando al palo, i primi rompono via le linguette con le pinze e

rimuovono (4) la cinghia tappa.

TAB

POLE MOUNTING

Attach mount to pole with suitable hardware

(not provided).

• Ate el montaje al poste con el hardware conveniente (no proporcionado).

• Attachez le bâti au poteau avec le matériel approprié (non fourni).

• Bringen Sie Einfassung zum Pfosten mit der verwendbaren Hardware an

(nicht bereitgestellt).

• Una a montagem ao pólo com a ferragem apropriada (não fornecida).

• Attacchi il supporto al palo con ssaggi adatti (non forniti).

TAB

* Max Strap Width: 0.75”

NOTE: THE FOLLOWING INSTRUCTIONS MAINLY SHOW THE FCH11C2W, BUT THESE INSTRUCTIONS ARE APPLICABLE TO ALL FCH11 MODELS.

Hinge housing away from mount by loosening (2)

rear screws.

• Abisagre la cubierta lejos del montaje aojando (2) los tornillos

posteriores.

• Articulez le logement à partir du bâti en desserrant (2) les vis arrière.

• Lagern Sie Gehäuse weg von Einfassung schwenkbar, indem Sie (2)

hintere Schrauben lösen.

• Articule a carcaça longe da montagem afrouxando (2) os parafusos

traseiros.

• Alloggiamento della cerniera a partire dal supporto allentando (2) viti

posteriori.

Run cables through mount either by conduit input or through the back of the mount.

• Funcione con los cables montan a través por el conducto entrado o a través de la parte posterior del montaje.

• Courez les câbles montent à travers par le conduit entré ou par le dos du bâti.

• Laufen lassen Sie Kabel anbringen durch entweder durch das eingegebene Rohr oder durch die Rückseite der Einfassung.

• Funcione cabos montam completamente pela canalização entrada ou através da parte traseira da montagem.

• Faccia funzionare i cavi attraverso montano dal condotto immesso o tramite la parte posteriore del supporto.

Pass cables through wiring membranes

(use screwdriver to pierce).

• Pase los cables a través de las membranas del cableado

(el destornillador del uso a perforar) .

• Passez les câbles par des membranes de câblage

(le tournevis d'utilisation à percer).

• Führen Sie Kabel durch Verdrahtungsmembranen

(zu durchbohren der Gebrauchschraubenzieher) .

• Passe cabos através das membranas da ação

(a chave de fenda do uso a perfurar).

• Passi i cavi tramite le membrane dei collegamenti

(cacciavite di uso da perforare).

Hinge the housing closed and tighten (2) rear screws.

• Abisagre la cubierta cerrada y apriete (2) los tornillos posteriores.

• Articulez le logement fermé et serrez (2) les vis arrière.

• Lagern Sie das geschlossene Gehäuse schwenkbar und ziehen Sie

(2) hintere Schrauben fest.

• Articule a carcaça fechado e aperte (2) os parafusos traseiros.

• Munisca l'alloggiamento di cardini chiuso e stringa (2) viti posteriori.

Open housing lid.

• Abra la tapa de la cubierta.

• Ouvrez le couvercle de logement.

• Öffnen Sie Gehäusekappe.

• Abra a tampa da carcaça.

• Apra il coperchio dell'alloggiamento.

Remove camera tray by squeezing tabs together.

• Quite la bandeja de la cámara exprimiendo lengüetas juntas.

• Enlevez le plateau d'appareil-photo en serrant des étiquettes ensemble.

• Entfernen Sie Kamerabehälter, indem Sie zusammen Vorsprünge

zusammendrücken.

• Remova a bandeja da câmera espremendo abas junto.

• Rimuova insieme il vassoio della macchina fotograca comprimendo le

linguette.

TAB

Mount camera with ¼-20 hardware. Slide tray into place and conrm tabs are securely snapped into place.

• Cámara del montaje con el ¼ - hardware 20. Resbale la bandeja dentro de lugar y conrme las lengüetas se encajan a presión con seguridad hacia lugar.

• Appareil-photo de bâti avec le ¼ - matériel 20. Glissez le plateau dans l'endroit et conrmez les étiquettes sont solidement cassés dans l'endroit.

• Einfassungskamera mit ¼ - Hardware 20. Schieben Sie Behälter in Platz und bestätigen Sie Vorsprünge werden gerissen sicher in Platz.

• Câmera da montagem com ¼ - ferragem 20. Deslize a bandeja no lugar e conrme abas são agarrados rmemente no lugar.

• Macchina fotograca del supporto con ¼ - ssaggi 20. Faccia scorrere il vassoio nel posto e confermi le linguette saldamente sono schioccati nel posto.

- Terminate power and data lines.

- Install shunt on “24Vac” jumper as shown.

- Power output to camera will be 24Vac.

• Termine las líneas de la energía y de datos.

- Instale la desviación en el puente “24Vac” como se muestra.

- La salida de energía a la cámara será 24Vac.

• Terminez les lignes de puissance et de données.

- Installez le shunt sur le pullover « 24Vac » comme montré.

- Le rendement de puissance à l'appareil-photo sera 24Vac.

• Beenden Sie Energie und Datenleitungen.

- Bringen Sie Shunt auf Überbrücker „24Vac“ wie gezeigt an.

- Abgabeleistung zur Kamera ist 24Vac.

• Termine linhas do poder e de dados.

- Instale a derivação na ligação em ponte “24Vac” como

mostrada.

- A saída de poder à câmera será 24Vac.

• Termini le linee di dati e di potere.

- Installi lo shunt sul ponticello “24Vac„ come indicato.

- L'output di forza motrice alla macchina fotograca sarà 24Vac.

INCOMING POWER

SHUNT

24Vac Diagram

Adjust the aim of the housing by loosening the

screw on the mount arm.

• Ajuste la puntería de la cubierta aojando el tornillo en el brazo

del montaje.

• Ajustez le but du logement en desserrant la vis sur le bras de bâti.

• Justieren Sie das Ziel des Gehäuses, indem Sie die Schraube am

Einfassungsarm lösen.

• Ajuste o alvo da carcaça afrouxando o parafuso no braço da montagem.

• Registri lo scopo dell'alloggiamento allentando la vite sul braccio del

supporto.

After powering your system up, make necessary

focus and camera adjustments.

• Después de accionar su sistema para arriba, haga los ajustes

necesarios del foco y de la cámara.

• Après avoir mis votre système, faites les ajustements nécessaires

de foyer et d'appareil-photo.

• Nachdem Sie oben Ihr System angetrieben haben, nehmen Sie

notwendige Fokus- und Kamerajustagen vor.

• Após ter psto seu sistema acima, faça ajustes necessários do foco

e da câmera.

• Dopo la potenza del vostro sistema in su, procedi alle registrazioni

necessarie della macchina fotograca e del fuoco.

- Terminate incoming voltage as shown.

- Install shunt on “12Vdc” jumper as shown.

- Power output to camera will be 12Vdc.

• Termine el voltaje entrante como se muestra.

- Instale la desviación en el puente “12Vdc” como se muestra.

- La salida de energía a la cámara será 12Vdc.

• Terminez la tension entrante comme montrée.

- Installez le shunt sur le pullover « 12Vdc » comme montré.

- Le rendement de puissance à l'appareil-photo sera 12Vdc.

• Beenden Sie ankommende Spannung wie gezeigt.

- Bringen Sie Shunt auf Überbrücker „12Vdc“ wie gezeigt an.

- Abgabeleistung zur Kamera ist 12Vdc.

• Termine a tensão entrante como mostrada.

- Instale a derivação na ligação em ponte “12Vdc” como

mostrada.

- A saída de poder à câmera será 12Vdc.

• Termini la tensione ricevuta come indicata.

- Installi lo shunt sul ponticello “12Vdc„ come indicato.

- L'output di forza motrice alla macchina fotograca sarà 12Vdc.

INCOMING POWER

SHUNT

12Vdc Diagram

The camera tray can be securely locked into place with

the provided 3.5 x 7mm screw. Tighten it through the

rear tray tab.

• La bandeja de la cámara se puede trabar con seguridad en lugar con el

tornillo proporcionado de 3.5 x de 7m m. Apriétela a través de la

lengüeta posterior de la bandeja.

• Le plateau d'appareil-photo peut être solidement fermé à clef sur

l'endroit avec la vis fournie de 3.5 x de 7mm. Serrez-le par l'étiquette

arrière de plateau.

• Der Kamerabehälter kann in Platz mit der zur Verfügung gestellten 3.5 x

7mm Schraube sicher verriegelt werden. Ziehen Sie ihn durch den

hinteren Behältervorsprung fest.

• A bandeja da câmera pode ser rmemente fechado no lugar com o

parafuso fornecido de 3.5 x de 7mm. Aperte-a através da aba traseira da

bandeja.

• Il vassoio della macchina fotograca può essere saldamente bloccato nel

posto con la vite fornita di 7mm x di 3.5. Stringalo attraverso la linguetta

posteriore del vassoio.

Close the housing lid and securely tighten the

(2) lid screws.

• Cierre la tapa de la cubierta y apriete con seguridad (2) los tornillos

de la tapa.

• Fermez le couvercle de logement et serrez solidement (2) les vis

de couvercle.

• Schließen Sie die Gehäusekappe und ziehen Sie sicher die (2)

Kappenschrauben fest.

• Feche a tampa da carcaça e aperte rmemente (2) os parafusos

da tampa.

• Chiuda il coperchio dell'alloggiamento e saldamente stringa (2) il

coperchio avvita.

If your housing has a sunshield, adjust it for your

particular lighting conditions by loosening (2) screws.

• Si su cubierta tiene un sunshield, ajústelo para que haya sus condiciones

de iluminación particulares aojando (2) los tornillos.

• Si votre logement a un sunshield, ajustez-le à vos états d'éclairage

particuliers en desserrant (2) des vis.

• Wenn Ihr Gehäuse ein sunshield hat, stellen Sie es auf Ihre bestimmten

Beleuchtungzustände ein, indem Sie (2) Schrauben lösen.

• Se sua carcaça tem um sunshield, ajuste-o para suas condições de

iluminação particulares afrouxando (2) os parafusos.

• Se il vostro alloggiamento ha un sunshield, registrilo per ottenere le

vostre condizioni di luce particolari allentando (2) avvita.

Wire Gauge

Total vA

consumed

,75

1,0

1,5

2,5

AWG

5.5

400

121

600

182

960

292

- - -

120

36.5

180

54.9

300

91.4

480

146

800

243

1300

396

27.1

141

43.0

225

68.6

358

109

571

174

905

275

1440

438

19.8

27.4

130

39.6

225

68.6

350

106

525

160

830

252

13.4

21.3

112

34.1

179

54.6

285

86.9

452

138

720

219

10.6

17.1

27.4

143

43.6

228

69.5

362

110

576

175

9.4

14.3

22.9

119

36.2

190

57.9

301

91.7

480

146

8.8

12.2

19.5

102

31.1

163

49.7

258

78.6

411

125

7.6

10.3

16.8

25.9

140

42.7

215

65.5

340

103

These are recommended maximum distances

for 24VAC with a 10% voltage drop.

• Éstos se recomiendan las distancias máximas para

24VAC con una caída de voltaje del 10%.

• Ceux-ci sont recommandés des distances maximum

pour 24VAC avec une chute de tension de 10%.

• Diese werden maximale Abstände für 24VAC mit

einem 10% Spannungsabfall empfohlen.

• Estes são recomendados distâncias máximas para

24VAC com uma queda de tensão de 10%.

• Questi sono suggeriti distanze massime per 24VAC con

una differenza de potenziale di 10%.













# Part Number Description

1 RPVL3948 FCH Camera Tray

2 RPVL3950 FCH Heater + Bracket

3 RP76VL2016 FCH 12VDC/24VAC PCB

4 RPFD080 12VDC 40mm Fan

5 RPVL3953 Cable Membrane (0.60" hole)

6 RPFTM2425G FCH Wall Mount Assembly

7 RPFCH11HP FCH Hardware Packet

8 RP71VLBL09 Outdoor Rated Fan (Thermiq only)





Replacement Parts

FCH11

Product Registration/Warranty

Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest

quality products available and superior customer service.

Should a problem arise, rest assure that Moog Videolarm stands behind its products by offering impressive warranty plans: 3 Years on all Housings, Poles,

Power Supplies, and Accessories and 5 Years on camera systems (SView, QView, Warriors), and InfraRed Illuminators.

Take a few moments and validate your purchase via the Online Product Registration Form at

www.videolarm.com/productregistration.jsp

• Simple and Trouble-Free RMA process

• Added into customer database to receive product updates / news

• Eliminate the need to archive original purchase documents:

Receipts, Purchase Orders, etc…