LG D13AJH1 Le manuel du propriétaire

Taper
Le manuel du propriétaire

Ce manuel convient également à

www.lg.com
OWNER’S MANUAL
AIR CONDITIONER
Copyright © 2016 - 2020 LG Electronics Inc. All Rights Reserved
TYPE: WALL MOUNTED
Read this owner's manual thoroughly before operating the
appliance and keep it handy for reference at all times.
ENGLISH FR FRAAIS AR
ﺓﻱﺏﺭﻉﻝﺍ
5401521237 Rev.: a
D11AJH1 NJ1 D13AJH1 NJ1 D19DAH1 NK1
TABLE OF CONTENTS
This manual may contain images or
content different from the model you
purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS ..................................................... 3
IMPORTANT SAFETY INSTRUCTIONS ................................................ 3
OPERATION ........................................................................ 11
Notes for Operation .............................................................................. 11
Parts and Functions .............................................................................. 11
Wireless Remote Control ......................................................................12
Restarting the Air Conditioner Automatically ........................................17
Using the Mode Function ......................................................................17
Using the Jet Mode Function ................................................................ 19
Using the Fan Speed Function .............................................................20
Using the Air Flow Direction Function ...................................................20
Setting the On/Off Timer ....................................................................... 21
Using the Sleep Function (Optional) .....................................................22
Using the Simple Timer Function (Optional) ......................................... 22
Using the Energy Display Function (Optional) ......................................23
Using the Light Off Function (Optional) ................................................23
Using the Comfort Air Function (Optional) ............................................ 23
Using the Energy Saving Function (Optional) ......................................24
Using the Energy Control Function (Optional) ...................................... 24
Using Special Functions .......................................................................25
SMART FUNCTIONS ........................................................... 28
Using LG ThinQ Application .................................................................28
MAINTENANCE ................................................................... 31
Clean the Air Filter ................................................................................33
Clean the Micro Dust, Triple and Allergy Filter (Optional) .....................34
TROUBLESHOOTING ......................................................... 35
3
SAFETY INSTRUCTIONS
EN
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect
operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’
as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this
symbol carefully and follow the instructions in order to
avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock,
injury or scalding to persons when using this product,
follow basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
4
EN
Installation
Do not install the air conditioner on an unstable surface or in a
place where there is danger of it falling.
Contact an authorized service center when installing or relocating
the air conditioner.
Install the panel and the cover of the control box safely.
Do not install the air conditioner in a place where flammable
liquids or gases such as gasoline, propane, paint thinner, etc., are
stored.
Make sure that the pipe and the power cable connecting the
indoor and outdoor units are not pulled too tight when installing
the air conditioner.
Use standard circuit breaker and fuse that conform to the rating of
the air conditioner.
Do not input air or gas into the system except with the specific
refrigerant.
Use non-flammable gas (nitrogen) to check for leak and to purge
air; using compressed air or flammable gas may cause fire or
explosion.
The indoor/outdoor wiring connections must be secured tightly,
and the cable should be routed properly so that there is no force
pulling the cable from the connection terminals. Improper or loose
connections can cause heat generation or fire.
5
EN
Install dedicated electric outlet and circuit breaker before using the
air conditioner.
Do not connect the ground wire to a gas pipe, a lightning rod, or a
telephone ground wire.
Means for disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
Operation
Be sure to use only those parts listed in the service parts list.
Never attempt to modify the equipment.
Make sure that children do not climb on or hit the outdoor unit.
Dispose of the batteries in a place where there is no danger of
fire.
Use only the refrigerant specified on the air conditioner label.
Cut off the power supply if there is any noise, smell, or smoke
coming from the air conditioner.
Do not leave flammable substances such as gasoline, benzene, or
thinner near the air conditioner.
Contact an authorized service center when the air conditioner is
submerged by flood waters.
Do not use the air conditioner for an extended period of time in a
small place without proper ventilation.
In the event of a gas leak (such as Freon, propane gas, LP gas,
etc.) ventilate sufficiently before using the air conditioner again.
To clean the interior, contact an authorized service center or
dealer. Using harsh detergents may cause corrosion or damage to
the unit.
Be sure to ventilate sufficiently when the air conditioner and a
heating appliance such as a heater are used simultaneously.
6
EN
Do not block the inlet or outlet of air flow.
Do not insert hands or other objects through the air inlet or outlet
while the air conditioner is operating.
Make sure that the power cable is neither dirty, loose, nor broken.
Never touch, operate, or repair the air conditioner with wet hands.
Do not place any objects on the power cable.
Do not place a heater or other heating appliances near the power
cable.
Do not modify or extend the power cable. Scratches or peeling
insulation on the power cables may result in fire or electric shock,
and should be replaced.
Cut off the power supply immediately in the event of a blackout or
a thunderstorm.
Take care to ensure that power cable could not be pulled out or
damaged during operation.
Do not touch refrigerant pipe, water pipe and any internal parts
while the unit is operating or immediately after operation.
Maintenance
Do not clean the appliance by spraying water directly onto the
product.
Before cleaning or performing maintenance, disconnect the power
supply and wait until the fan stops.
7
EN
Technical Safety
Installation or repairs made by unauthorized persons can pose
hazards to you and others.
The information contained in the manual is intended for use by a
qualified service technician who is familiar with the safety
procedures and equipped with the proper tools and test
instruments.
Failure to read and follow all instructions in this manual can result
in equipment malfunction, property damage, personal injury and/or
death.
The appliance shall be installed in accordance with national wiring
regulations.
When the power cord is to be replaced, the replacement work
shall be performed by authorized personnel using only genuine
replacement parts.
This appliance must be properly grounded to minimize risk of
electric shock.
Do not cut or remove the grounding prong from the power plug.
Attaching the earth wire to the power outlet cover screw does not
ground the appliance unless the cover screw is metal, uninsulated,
and the power outlet is grounded through house wiring.
If you have any doubt whether the air conditioner is properly
grounded, have the power outlet and circuit checked by a qualified
electrician.
The refrigerant and insulation blowing gas used in the appliance
require special disposal procedures. Consult a service agent or a
similarly qualified person before disposing of them.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in
order to avoid a hazard.
8
EN
CAUTION
To reduce the risk of minor injury to persons, malfunction,
or damage to the product or property when using this
product, follow basic precautions, including the following:
Installation
Do not install the air conditioner in an area where it is directly
exposed to sea wind (salt spray).
Install the drain hose properly for the smooth drainage of water
condensation.
Exercise caution when unpacking or installing the air conditioner.
Do not touch the leaking refrigerant during installation or repair.
Transport the air conditioner with two or more people or use a
forklift.
Install the outdoor unit such that it is protected from direct
sunlight. Do not place the indoor unit in a place where it is directly
exposed to sunlight via the windows.
Safely dispose of packing materials such as screws, nails or
batteries using proper packaging after installation or repair.
Install the air conditioner in a place where the noise from the
outdoor unit or the exhaust fumes will not inconvenience the
neighbors. Failure to do so may result in conflict with the
neighbors.
9
EN
Operation
Remove the batteries if the remote control is not to be used for an
extended period of time.
Make sure that the filter is installed before operating the air
conditioner.
Be sure to check if there is a refrigerant leak after installing or
repairing the air conditioner.
Do not place any object on the air conditioner.
Never mix different types of batteries, or old and new batteries for
the remote control.
Do not let the air conditioner run for a long time when humidity is
very high or when a door or a window has been left open.
Stop using the remote control if there is a fluid leak in the battery.
If your clothes or skin are exposed to the leaking battery fluid,
wash off with clean water.
Do not expose people, animals, or plants to the cold or hot wind
from the air conditioner for extended periods of time.
If the leaking battery fluid has been swallowed, rinse the inside of
the mouth thoroughly and consult a doctor.
Do not drink the water drained from the air conditioner.
Do not use the product for special purposes, such as preserving
foods, works of art, and etc. It is an air conditioner for consumer
purposes, not a precision refrigeration system. There is risk of
damage or loss of property.
Do not recharge or disassemble the batteries.
10
EN
Maintenance
Never touch the metal parts of the air conditioner when removing
the air filter.
Use a sturdy stool or ladder when cleaning, maintaining, or
repairing the air conditioner at a height.
Never use strong cleaning agents or solvents when cleaning the
air conditioner or spray water. Use a smooth cloth.
11
OPERATION
EN
Notes for Operation
Suggestion for Energy Saving
Do not over-cool the space. This may be harmful for your health and may consume more
electricity.
Block sunlight with blinds or curtains while you are operating the air conditioner.
Keep doors or windows closed tightly while you are operating the air conditioner.
Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
Speed up the fan to cool or warm indoor air quickly, within a short period of time.
Open windows regularly for ventilation. The indoor air quality may deteriorate if the air conditioner
is used for long durations.
Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the
air flow or reduce the unit performance.
Parts and Functions
Indoor Unit Outdoor Unit
Air Filter
Air Intake
Front Cover
Air Outlet
Air Deflector (Horizontal Vane)
Air Deflector (Vertical Louver)
On/Off Button
1
2
3
4
5
6
7
Air Intake Vents
Air Outlet Vents
1
2
NOTE
The number and location of operation lamps may vary according to the model of the air
conditioner.
The feature may be changed according to the type of model.
12
EN
Wireless Remote Control
Inserting Batteries
If the display screen of the remote control
begins to fade, replace the batteries. Insert AAA
(1.5 V) batteries before using the remote
control.
1
Remove the battery cover.
2
Insert the new batteries and make sure that
the + and - terminals of the batteries are
installed correctly.
Installing the Remote Control
Holder
To protect the remote control, install the holder
where there is no direct sunlight.
1
Choose a safe and easily accessible
location.
2
Fix the holder by fastening 2 screws firmly
with a screwdriver.
Operating Method
Point the remote control towards the signal
receiver at the right side of the air conditioner to
operate it.
NOTE
The remote control may operate other
electronic devices if it is directed towards
them. Make sure to point the remote control
towards the air conditioner signal receiver.
For proper operation, use a soft cloth to clean
the signal transmitter and receiver.
In case of a function not provided in the
product, no buzzer sound occurs from the
product when a button for such function on
the remote control is pressed except for Air
Flow Direction (
SWING
), Energy Display ( ),
Air Purification function (
).
13
EN
Setting the Current Time
1
Insert batteries.
The icon below blinks at the bottom of the
display screen.
2
Press or button to select the
minutes.
3
Press SET/CANCEL button to finish.
NOTE
The On/Off Timer is available after setting the
current time.
Using the °C/°F Conversion
Function (Optional)
This function changes unit between °C and °F
Press and hold
SWING
button about 5 seconds.
Operating the Air Conditioner
without the Remote Control
You can use the ON/OFF button of the indoor
unit to operate the air conditioner when the
remote control is unavailable.
1
Open the front cover (Type2) or horizontal
vane (Type1).
2
Press the ON/OFF button.
Type1
ON/OFF
Type2
ON/OFF
NOTE
The stepping motor may be broken, if the
horizontal vane opens rapidly.
The fan speed is set to high.
The feature may be changed according to the
type of model.
The temperature cannot be altered when
using this emergency ON/OFF button.
For cooling-only models, the temperature is
set to 22 °C
For cooling & heating models, the temperature
is set from 22 °C to 24 °C
14
EN
Using Wireless Remote Control
You can operate the air conditioner more conveniently with the remote control.
SWING
kW [3 s]
℃↔℉ [5 s]
DIAGNOSIS [5 s]
SWING
SET UP
ROOM
TEMP
JET
MODE
MODE
TEMP
FAN
SPEED
FUNC.
TIMER CANCEL
SET
CANCEL
*
*
1
2
*
RESET
Button
Display
Screen
Description
- To turn on/off the air conditioner.
To adjust the desired room
temperature in cooling, heating or auto
changeover mode.
MODE
To select the cooling mode.
To select the heating mode.
To select the dehumidification mode.
To select the fan mode.
To select the auto changeover/auto
operation mode.
JET
MODE
To change room temperature quickly.
FAN
SPEED
To adjust the fan speed.
SWING
SWING
To adjust the air flow direction
vertically or horizontally.
NOTE
* buttons may be changed according to the type of model.
15
EN
SWING
kW [3 s]
℃↔℉ [5 s]
DIAGNOSIS [5 s]
SWING
SET UP
ROOM
TEMP
JET
MODE
MODE
TEMP
FAN
SPEED
FUNC.
TIMER CANCEL
SET
CANCEL
*
*
1
2
*
RESET
Button
Display
Screen
Description
TIMER
To turn on/off air conditioner
automatically at desired time.
SET/
CANCEL
-
To set/cancel the special functions and
timer.
- To cancel the timer settings.
- To adjust time.
*LIGHT
OFF
-
To set the brightness of the display on
the indoor unit.
ROOM
TEMP
To display the room temperature.
°C↔°F [5 s] To change unit between °C and °F
*ENERGY
SAVING
To minimize power consumption.
*COMFORT
AIR
To adjust the air flow to deflect wind.
kW [3 s] -
To set whether or not to display
information regarding energy.
*ENERGY
CTRL
To bring the effect of the power saving.
*COMFORT
SLEEP
To make a comfortable sleeping
environment.
DIAGNOSIS
[5 s]
-
To conveniently check maintenance
information of a product.
16
EN
SWING
kW [3 s]
℃↔℉ [5 s]
DIAGNOSIS [5 s]
SWING
SET UP
ROOM
TEMP
JET
MODE
MODE
TEMP
FAN
SPEED
FUNC.
TIMER CANCEL
SET
CANCEL
*
*
1
2
*
RESET
Button
Display
Screen
Description
FUNC.
The Ion generator uses millions of ions
to help improve indoor air quality.
To reduce noise from outdoor units.
To keep your skin moisturized by
generating ion clusters.
To lower indoor humidity quickly.
To maintain a minimum room
temperature and prevent objects in the
room from freezing.
To scare away a mosquito.
To remove moisture generated inside
the indoor unit.
To make a comfortable sleeping
environment.
RESET - To initialize the remote control settings.
NOTE
Some functions may not be supported, depending on the model.
* buttons may be changed according to the type of model.
Press the SET/CANCEL button to operate the selected FUNC.
17
EN
Restarting the Air Conditioner
Automatically
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings.
Disabling Auto Restart
1
Open the front cover (Type2) or horizontal
vane (Type1).
2
Press the ON/OFF button and hold it for 6
seconds, then the unit will beep twice and
the lamp will blink twice 4 times.
To re-enable the function, press the ON/
OFF button and hold it for 6 seconds. The
unit will beep twice and the lamp will blink
4 times.
Type1
ON/OFF
Type2
ON/OFF
NOTE
The feature may be changed according to the
type of model.
If you press and hold the ON/OFF button for 3
– 5 seconds, instead of 6 seconds, the unit
will switch to the test operation. In the test
operation, the unit blows out strong cooling air
for 18 minutes and then returns to factory
default settings.
Using the Mode Function
This function allows you to select the desired
function.
Cooling Only Model
Cooling Mode
Auto Operation(AI) Mode
Dehumidification Mode
Fan Mode
Cooling & Heating Model
Cooling Mode
Auto Changeover Mode
Dehumidification Mode
Heating Mode
Fan Mode
Cooling Mode
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Cooling Mode.
is displayed on the display screen.
3
Press or button to set the desired
temperature.
18
EN
Auto Operation (Artificial
Intelligence)
Cooling Only Model
This mode automatically sets the fan speed and
temperature depending on the room
temperature.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Auto Operation.
is displayed on the display screen.
3
Press or button to select the desired
operation code if the temperature is higher
or lower than the desired temperature.
Code Description
2 Cold
1 A little cold
0 Maintain room temperature
-1 A little hot
-2 Hot
NOTE
In this mode, you cannot adjust the fan speed,
but you can set the air deflector to rotate
automatically.
Auto Changeover Mode
Cooling & Heating Model
This mode changes the mode automatically to
maintain the set temperature at ±2 °C
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Auto Changeover Mode.
is displayed on the display screen.
3
Press or button to set the desired
temperature.
4
Press FAN SPEED button to adjust the fan
speed.
Dehumidification Mode
This mode removes excess moisture from a
highly humid environment or during the rainy
season, in order to prevent mildew from setting
in. This mode adjusts the room temperature and
the fan speed automatically to maintain the
optimal level of humidity.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Dehumidification Mode.
is displayed on the display screen.
NOTE
In this mode you cannot adjust the room
temperature, it is adjusted automatically.
The room temperature is not displayed on the
display screen.
In the dehumidification mode, compressor and
indoor fan may not operate when the room
temperature is below 24 °C
19
EN
Heating Mode
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Heating Mode.
is displayed on the display screen.
3
Press or button to set the desired
temperature.
NOTE
will be displayed on the indoor unit when
defrosting is operating.
Furthermore, this indication will be displayed
on the indoor unit:
When preheating is operating.
When the room temperature has been
reached to the set temperature.
Fan Mode
This mode only circulates the indoor air without
changing the room temperature.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Fan Mode.
is displayed on the display screen.
3
Press FAN SPEED button to adjust the fan
speed.
Using the Jet Mode Function
Changing Room Temperature
Quickly
This function allows you to cool indoor air
quickly during the summer or warm it quickly
during winter.
Cooling & Heating model : The Jet Mode
function is available with Cooling, Heating and
Dehumidification Mode.
Cooling Only model : The Jet Mode function is
available with Cooling, Dehumidification, Fan,
Auto Operation Mode and Air Purification
function.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
desired mode.
3
Press JET MODE button.
is displayed on the display screen.
NOTE
Jet Heating Mode is not available on some
models.
In Jet Cooling Mode, strong air blows out for
30 minutes.
After 30 minutes later, setting temperature is
maintaining 18 °C
If you want to change the temperature, Press
or button to set the desired
temperature.
In Jet Heating Mode, strong air blows out for
30 minutes.
After 30 minutes later, setting temperature is
maintaining 30 °C
If you want to change the temperature, Press
or button to set the desired
temperature.
This function may operate differently from the
remote control display.
20
EN
Using the Fan Speed
Function
Adjusting the Fan Speed
Press FAN SPEED button repeatedly to adjust
the fan speed.
Display Screen Speed
High
Medium - High
Medium
Medium - Low
Low
- Natural Wind
NOTE
The fan speed of Natural Wind adjusts
automatically.
The fan speed icons are displayed on some
indoor units.
Indoor unit display is displayed only 5 seconds
and return to the setting temperature on some
models.
Using the Air Flow Direction
Function
This function adjusts the direction of the air flow
vertically (horizontally).
Press
SWING
(
SWING
) button repeatedly and select
the desired direction.
Select
( ) to adjust the direction of the
air flow automatically.
NOTE
Adjusting the air flow direction horizontally
may not be supported, depending on the
model.
Adjusting the air deflector arbitrarily may
cause product failure.
If you restart the air conditioner, it starts to
operate with the previously set direction of air
flow, so the air deflector may not match the
icon displayed on the remote control. When
this occurs, press
SWING
or
SWING
button to
adjust the direction of the air flow again.
This function may operate differently from the
remote control display.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120

LG D13AJH1 Le manuel du propriétaire

Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues