Samsung Electronics F-MON-KIT-1 Mode d'emploi

Taper
Mode d'emploi
SmartThings
Quick-Start Guide
Hub
A safer,
smarter home
starts with
me!
One App + One Hub +
All Your Things
Creating a safer, smarter home has
never been easier. Start with the
SmartThings app and Hub, add your
favorite products, and control them
from another room or another country.
App Hub Things
The free SmartThings
app lets you get
important notifications
about what’s
happening, control
things in every room,
and run your home
from your phone.
The Hub sends
commands from
the free app
to your connected
things, and sends
important alerts from
your things to your
smartphone.
Add devices from
SmartThings’
family of sensors or
hundreds of other
connected products
to create a smart
home that fits your
lifestyle.
Meet Your
SmartThings Hub
SmartThings lets you easily control,
monitor, and secure your home from
anywhere in the world. At the center of
it all is the SmartThings Hub.
The Brain of Your
Smart Home
Like a live-in translator, the Hub
wirelessly connects all of the different
sensors around your home so that they
can send important information to your
smartphone, and to each other.
The SmartThings Hub connects to your
Internet router via the included Ethernet
cable. The Hub has a ZigBee, Z-Wave,
and Bluetooth radio, and also supports
IP-accessible devices–providing
customers with the widest range of
supported devices of any smart home
platform. In addition, the Hub contains
replaceable batteries that allow it to
continue operating in the event of a
power outage.
For a list of products that have been
tested and verified as compatible,
please visit
http://www.smartthings.com/product/
works-with-smartthings/.
So Easy Anyone Can Do It
As with all SmartThings devices, the
Hub requires no wiring or messy
installationjust a simple setup that
anyone can do.
Simply plug in the included Ethernet
cable from your Hub to your Internet
router, attach the power cord to the
wall, and then use the free SmartThings
app to start connecting your devices.
Easy peasy.
Front
Back
Status Light
Power Reset USB Network
(ethernet)
Simple Setup
The SmartThings Hub works best if installed in a
central location to where your SmartThings will be
connected. The recommended separation
distance from the user for this equipment is 7.6
inches (20 cm).
Connect your SmartThings Hub to your
Internet router using the included Ethernet
cable.
Plug in the power adapter to an outlet and
attach the power connector to the back
of the Hub.
Continue setting up your Hub by going to
www.SmartThings.com/start on your
smartphone and following the
on-screen instructions.
AC Plug
Power Adapter
Network
Connector
Power Connector
Battery Backup
Installation
Disconnect the network cable and power adapter
or any other connected peripherals before
installing batteries (4 x AA):
Slide bottom cover off.
Insert 4 AA batteries.
Slide bottom cover on till it snaps in to
place.
NOTE: Hub does not recharge batteries.
1 2
3 4
Safety Instructions
Disconnect the network cable and power adapter or any other connected
peripherals if any of the following conditions exist:
The power cord or connector is damaged or frayed.
You want to clean the Hub (see Important Safety Instructions).
The Hub or attached cables are exposed to rain, water/fluids, or excessive
moisture.
The Hub power adapter is damaged or has been dropped and you
suspect it needs to be serviced.
Important Safety Instructions
Read, keep, and follow these instructions.
Heed all warnings.
Do not use this product near water or expose the product to dripping or
splashing of any water or liquid.
Clean only with a dry cloth.
Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.
Only use attachments and accessories specified by the manufacturer.
Read our Product Usage Guidelines at: http://SmartThings.com/guidelines
Avoid installing the SmartThings
Hub near or inside sources of
metal, radio, or electromagnetic
interference.
Vermeiden Sie die Installation des
SmartThings Hubs in oder in der Nähe von
Metall, Funkantennen, oder anderen
elektromagnetischen Störsendern
Éviter l’installation du Hub SmartThings a à
proximité ou a à l’intérieur d’objets
métalliques ou de sources d’interférences
radioélectriques ou électromagnétiques.
WARNING: No user-serviceable
parts inside. Refer all servicing
to qualified service personnel.
IMPORTANT CONSUMER
INFORMATION: Please read
before activating or using the device.
WARNING: This product contains chemicals
known to the State of California to cause
cancer and reproductive toxicity. For more
information, please call 1-800-SAMSUNG
(726-7864).
This ZigBee Certified Product works with ZigBee networks supporting the Home
Automation Profile.
Global 2.4 GHz wireless use.
ZigBee® Certified is a registered trademark of the ZigBee Alliance.
Correct disposal of batteries in this product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types
of waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can
take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in
this product should not be disposed of with other household waste. Where
marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If
batteries are not properly disposed of, these substances can cause harm to
human health or the environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
Disclaimer
Some content and services accessible through this device belong to third
parties and are protected by copyright, patent, trademark and/or other
intellectual property laws. Such content and services are provided solely for
your personal non-commercial use. You may not use any content or services in
a manner that has not been authorised by the content owner or service
provider.
Without limiting the foregoing, unless expressly authorised by the applicable
content owner or service provider, you may not modify, copy, republish, upload,
post, transmit, translate, sell, create derivative works, exploit, or distribute in any
manner or medium any content or services displayed through this device.
Tested to Comply With FCC Standards
FOR HOME OR OFFICE USE
Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. Lexploitation est aurorisee aux deux
conditions suivantes: (1) l’appareil ne doit pas pas produire de brouillage, et (2)
l’utilisateur de lappareil doit accepter toute brouillage radioelectrique subi,
meme si le brouillage est susceptible d’en compromettre le fonctionnement.
Information to the User
Changes or modifications not expressly approved by SmartThings, Inc. could
void your authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Certifications
Hereby, SmartThings Inc. declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. The
original Declaration of Conformity may be found at
smartthings.com/eu/compliance.
Certified under FCC Part 15. Certified in Canada by IC to RSS-210.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
SmartThings Hub Model: STH-ETH-200, FCC ID: R3Y-STH-ETH200,
IC: 10734A-STHETH200, M/N: PGC431-D ,
Contains FCC ID: D87-ZM5304-U,
IC: 11263A-ZM5304, M/N: ZM5304AU, CE version contains M/N: ZM5304AE.
One (1) Year Limited Warranty
SmartThings, Inc. warrants this product (the “Product) against defects in materials and/or
workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by
the original purchaser (Warranty Period”). If a defect arises and a valid claim is received
within the Warranty Period, then as your sole remedy (and SmartThings’ sole liability),
SmartThings will at its option either 1) repair the defect at no charge, using new or
refurbished replacement parts, or 2) replace the Product with a new product that is
functionally equivalent to the original, in each case within 30 days following receipt of the
returned Product. A replacement product or part, assumes the remaining warranty of the
original Product. When a Product or part is exchanged, any replacement item becomes
your property and the replaced Product or part becomes SmartThings’ property.
Obtaining Service: To obtain warranty service, visit support.smartthings.com to speak with
a service agent or open a service request. Please be prepared to describe the Product that
needs service and the nature of the problem. A purchase receipt is required. The Product
must be insured, and shipped freight prepaid and securely packaged. You must contact
support for a Return Material Authorization Number (“RMA Number”) before shipping any
Product, and include the RMA Number, a copy of your purchase receipt and a description
of the problem you are experiencing with the Product. Any claim under this Limited
Warranty must be submitted to SmartThings before the end of the Warranty Period.
Exclusions: This warranty does not apply to: a) damage caused by failure to follow
instructions relating to the Product’s use or the installation of components; b) damage
caused by accident, abuse, misuse, transport, neglect, fire, floods, earthquake or other
external causes; c) damage caused by service performed by anyone who is not an
authorized representative of SmartThings; d) accessories used in conjunction with a
covered Product; e) a Product or part that has been modified to alter functionality or
capability; f) items intended to be periodically replaced by the purchaser during the normal
life of the Product, including, without limitation, batteries, bulbs or cables; g) a Product that
is used commercially or for a commercial purpose, in each case as determined by
SmartThings.
EXCEPT FOR BODILY INJURY, SMARTTHINGS SHALL NOT BE LIABLE FOR (I) ANY LOST
PROFITS, COST OF PROCUREMENT OF SUBSTITUTE PRODUCTS, OR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR (II) ANY AMOUNTS IN EXCESS OF THE
PURCHASE PRICE FOR THE PRODUCT, IN EACH CASE WHETHER RESULTING FROM
THE USE OF OR INABILITY TO USE THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY, EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND
EXCLUSIONS MAY NOT APPLY TO YOU.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, SMARTTHINGS DISCLAIMS ANY
AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF SMARTTHINGS CANNOT
LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT
PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE
WARRANTY PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights and you may also have other rights, which vary
from state to state. To exercise your rights under this warranty, please follow the instructions
above under the heading “Obtaining Service”, or contact SmartThings at SmartThings, Inc.,
456 University Ave. Suite 200, Palo Alto, CA 94301, USA.
Samsung is a registered trademark of Samsung Electronics Co., Ltd.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Samsung Electronics F-MON-KIT-1 Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues