JENN-AIR
®
DOUBLE REFRIGERATOR DRAWERS/
REFRIGERATOR/FREEZER DRAWERS/
CAJÓN REFRIGERADOR DOBLE
CAJÓN REFRIGERADOR/CONGELADOR JENN-AIR
®
DOUBLE TIROIR RÉFRIGÉRÉ
TIROIRS DE RÉFRIGÉRATION/CONGÉLATION JENN-AIR
®
W10741583C/8336460125000C
USE & CARE GUIDE
For questions about features, operation/performance, parts, accessories, or service, call:
1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.
In Canada, call: 1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.ca.
MANUAL DE USO Y CUIDADO
Si tiene preguntas respecto a las características, funcionamiento, rendimiento, partes, accesorios o servicio técnico, llame al:
1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet www.jennair.com.
En Canadá, llame al: 1-800-JENNAIR (1-800-536-6247), o visite nuestro sitio de internet www.jennair.ca.
GUIDE D’UTILISATION ET D’ENTRETIEN
Au Canada, pour assistance, installation ou service, composez le 1-800-JENNAIR (1-800-536-6247)
ou
visitez notre site web à www.jennair.ca.
Table of Contents/Índice/Table des matières...................................................................................... 2
2
TABLE OF CONTENTS
REFRIGERATOR DRAWERS SAFETY..........................................3
Proper Disposal of Your Old Refrigerated Appliance..................3
DESIGN SPECIFICATIONS............................................................4
INSTALLATION REQUIREMENTS................................................5
Tools and Parts ............................................................................5
Location Requirements................................................................5
Electrical Requirements ...............................................................5
Water Supply Requirements........................................................6
Product Dimensions.....................................................................6
Custom Overlay Drawer Panels...................................................7
INSTALLATION INSTRUCTIONS..................................................8
Unpack the Refrigerator Drawers ................................................8
Connect Water Supply.................................................................9
Move the Refrigerator Drawers to Final Location........................9
Level the Refrigerator Drawers ..................................................10
Install Custom Overlay Panel.....................................................10
Complete Installation .................................................................10
REFRIGERATOR
DRAWERS USE ............................................................................11
Normal Sounds...........................................................................11
Ensuring Proper Air Circulation..................................................11
Using the Controls......................................................................11
Ice Maker and Water Filtration System......................................13
REFRIGERATOR DRAWERS CARE............................................14
Cleaning......................................................................................14
Power Interruptions....................................................................14
Vacation Care.............................................................................14
TROUBLESHOOTING ..................................................................15
ASSISTANCE OR SERVICE.........................................................16
In the U.S.A. ...............................................................................16
In Canada ...................................................................................16
Accessories ................................................................................16
PRODUCT DATA SHEETS...........................................................17
WARRANTY ..................................................................................18
ÍNDICE
SEGURIDAD DE LOS CAJONES REFRIGERADOS ..................19
Cómo deshacerse adecuadamente
de su aparato refrigerado viejo..................................................20
ESPECIFICACIONES DE DISEÑO ..............................................20
REQUISITOS DE INSTALACIÓN.................................................21
Piezas y herramientas ................................................................21
Requisitos de ubicación.............................................................21
Requisitos eléctricos..................................................................21
Requisitos del suministro de agua.............................................22
Medidas del producto................................................................22
Paneles de los cajones recubiertos a la medida.......................23
INSTRUCCIONES DE INSTALACIÓN.........................................24
Cómo desempacar los cajones refrigerados.............................24
Conexión del suministro de agua ..............................................24
Mueva los cajones refrigerados a su posición final...................25
Nivelación de los cajones refrigerados......................................26
Cómo instalar el panel recubierto a la medida..........................26
Complete la instalación..............................................................27
USO DE LOS CAJONES REFRIGERADOS ................................27
Sonidos normales.......................................................................27
Cómo asegurar la debida circulación de aire............................27
Uso de los controles ..................................................................27
Fábrica de hielo y sistema de filtración de agua .......................29
CUIDADO DE LOS CAJONES REFRIGERADOS.......................30
Limpieza .....................................................................................30
Cortes de corriente.....................................................................31
Cuidado durante las vacaciones................................................31
SOLUCIÓN DE PROBLEMAS......................................................31
AYUDA O SERVICIO TÉCNICO...................................................33
En los EE.UU. .............................................................................33
En Canadá..................................................................................33
Accesorios..................................................................................33
HOJA DE DATOS DEL PRODUCTO ...........................................34
GARANTÍA.....................................................................................35
TABLE DES MATIÈRES
SÉCURITÉ DES TIROIRS RÉFRIGÉRÉS....................................37
Mise au rebut correcte de votre vieil appareil réfrigéré.............38
SPÉCIFICATIONS DU DESIGN ...................................................38
EXIGENCES D’INSTALLATION...................................................39
Outillage et pièces......................................................................39
Exigences d’emplacement.........................................................39
Spécifications électriques..........................................................40
Spécifications de l’alimentation en eau .....................................40
Dimensions du produit...............................................................40
Panneaux décoratifs personnalisés de tiroirs............................41
INSTRUCTIONS D’INSTALLATION ............................................43
Déballage des tiroirs réfrigérés ..................................................43
Raccordement de l'alimentation en eau....................................43
Déplacement des tiroirs réfrigérés à leur emplacement final....44
Réglage de l'aplomb des tiroirs réfrigérés.................................44
Installation du panneau décoratif personnalisé.........................45
Achever l'installation ..................................................................45
UTILISATION DES TIROIRS RÉFRIGÉRÉS................................45
Sons normaux ............................................................................45
Pour assurer une circulation d'air correcte................................45
Utilisation des commandes........................................................46
Machine à glaçons et système de filtration d’eau .....................48
ENTRETIEN DES TIROIRS RÉFRIGÉRÉS..................................49
Nettoyage ...................................................................................49
Pannes de courant .....................................................................49
Entretien avant les vacances .....................................................49
DÉPANNAGE.................................................................................50
ASSISTANCE OU SERVICE.........................................................51
Aux États-Unis............................................................................51
Au Canada..................................................................................51
Accessoires ................................................................................51
FEUILLES DE DONNÉES SUR LE PRODUIT.............................52
GARANTIE.....................................................................................53
3
REFRIGERATOR DRAWERS SAFETY
Proper Disposal of Your Old
Refrigerated Appliance
IMPORTANT: Child entrapment and suffocation are not problems
of the past. A junked or abandoned refrigerated appliance is still
dangerous–even if it will sit for “just a few days.” If you are getting
rid of your old refrigerated appliance, please follow these
instructions to help prevent accidents.
Before You Throw Away Your Old
Refrigerated
Appliance:
Remove the door or drawer(s).
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electric shock, or injury when using your refrigerator drawer(s), follow these basic
SAVE THESE INSTRUCTIONS
■ Plug into a grounded 3 prong outlet.
■ Do not remove ground prong.
■ Do not use an adapter.
■ Do not use an extension cord.
■ Disconnect power before servicing.
■ Replace all parts and panels before operating.
■ Remove door or drawer(s) from your old refrigerated
appliance.
■ Use nonflammable cleaner.
■ Keep flammable materials and vapors, such as gasoline,
away from refrigerator drawer(s).
■ Use two or more people to move and install refrigerator
drawer(s).
precautions:
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
WARNING
Suffocation Hazard
Remove door or drawer(s) from your old refrigerated
appliance.
Failure to do so can result in death or brain damage.
Important information to know about disposal of
refrigerants:
Dispose of refrigerator in accordance with Federal and Local
regulations. Refrigerants must be evacuated by a licensed,
EPA certified refrigerant technician in accordance with
established procedures.
4
DESIGN SPECIFICATIONS
24" Drawer Models
Double Refrigerator Drawers
Two refrigerator drawers provide additional storage options in the kitchen or other areas of the home.
Euro Series
JUD24FR*S
Overlay - Custom Panels and Handles Required
JUD24FR*X
Refrigerator/Freezer Drawers (with ice maker and water filter)
Upper refrigerator drawer and lower freezer drawer provide additional storage options in the kitchen or other areas of the home.
Factory-installed ice maker in lower drawer ensures a constant supply of ice on hand at all times.
Euro Series
JUD24FC*S
Overlay - Custom Panels and Handles Required
JUD24FC*X
5
INSTALLATION REQUIREMENTS
Tools and Parts
Tools Needed:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Additional Tools Needed (Style 2 - Overlay only):
Parts Needed (Style 2 - Overlay only):
Parts Supplied:
Location Requirements
NOTES:
■ For the refrigerator drawers to be flush with the front of the
base cabinets remove any baseboards or moldings from the
rear of the opening. See “Product Dimensions” and later in
this section “Opening Dimensions (both styles).”
■ It is recommended that you do not install the refrigerator
drawers near an oven, radiator, or other heat source.
■ Do not install in a location where the temperature will fall
below 55°F (13°C).
Opening Dimensions (both styles)
■ Height dimensions are shown with the leveling legs extended
to the minimum height of ¹⁄₄" (6
mm) below the refrigerator
drawers.
NOTE: When leveling legs are fully extended to 1" (25 mm)
below the refrigerator drawers, add ³⁄₄" (19
mm) to the height
dimensions. See “Product Dimensions.”
■ If the floor of the opening is not level with the kitchen floor,
shim the opening to make it level with the kitchen floor.
Electrical Requirements
Before you move your refrigerator drawers into the final location,
it is important to make sure you have the proper electrical
connection.
Recommended grounding method
A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator drawers be provided. Use
an outlet that cannot be turned off by a switch. Do not use an
extension cord.
IMPORTANT: If this product is connected to a GFCI
(Ground
Fault Circuit Interrupter) equipped outlet, nuisance
tripping of the power supply may occur, resulting in loss of
cooling. Food quality and flavor may be affected. If nuisance
tripping has occurred, and if the condition of the food appears
poor, dispose of it.
■ Cordless drill
■ ¹⁄₈" Drill bit
■ Tape measure
■ Level
■ Phillips screwdriver
■ Scissors
■ Pencil
■ Scribe
■ Custom Overlay Drawer Panels —
See “Custom Overlay Drawer Panels.”
■ Hardware
■ Hooks (8)
■ Screws (16)
■ Self-tap wood screws (4)
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator drawer(s).
Failure to do so can result in death, explosion, or fire.
Critical Dimensions:
A. Utility opening
B. Minimum opening width
A
34
3
/8" (873 mm) min.
35" (889 mm) max.
B
14
3
/4"
(375 mm)
1
/2"
(13 mm)
24
" (609.6 mm) min.
24
"
(609.6 mm)
min.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
6
Water Supply Requirements
(Refrigerator/Freezer Drawers only)
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
IMPORTANT:
■ If you turn ON the refrigerator before the water line is
connected, turn OFF the ice maker.
■ All installations must meet local plumbing code requirements.
■ Use copper tubing and check for leaks. Install copper tubing
only in areas where the household temperatures will remain
above freezing.
TOOLS NEEDED: Flat-blade screwdriver, ⁷⁄₁₆" and ¹⁄₂" open-end
wrenches or two adjustable wrenches, ¹⁄₄" nut driver and drill bit,
cordless drill.
NOTE: Your refrigerator dealer has a kit available with a
¹⁄₄" (6 mm) saddle-type shutoff valve, a union, and copper tubing.
Before purchasing, make sure a saddle-type valve complies
with your local plumbing codes. Do not use a piercing-type or
³⁄₁₆" (4.76
mm) saddle valve which reduces water flow and clogs
more easily.
Water Pressure
A cold water supply with water pressure of between 30 and
120
psi (207 and 827 kPa) is required to operate ice maker. If
you have questions about your water pressure, call a licensed,
qualified plumber.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of
a reverse osmosis system going to the water inlet valve of the
refrigerator needs to be between 30
and 120 psi (207 and
827
kPa).
If a reverse osmosis water filtration system is connected to your
cold water supply, the water pressure to the reverse osmosis
system needs to be a minimum of 40
to 60 psi (276 to 414 kPa).
If the water pressure to the reverse osmosis system is less than
40
to 60 psi (276 to 414 kPa):
■ Check to see whether the sediment filter in the reverse
osmosis system is blocked. Replace the filter if necessary.
■ Allow the storage tank on the reverse osmosis system to refill
after heavy usage.
If you have questions about your water pressure, call a licensed,
qualified plumber.
Product Dimensions
Drawer Height Dimensions
■ Height dimensions are shown with the leveling legs extended
to ¹⁄₄" (6
mm) below the refrigerator drawers.
■ When leveling legs are fully extended to 1" (25 mm) below
the refrigerator drawers, add ³⁄₄" (19 mm) to the height
dimensions.
■ The power cord is 60" (1.52 m) long.
Style 1 - Euro Series (front view)
Style 2 - Overlay (front view)
15"
(380 mm)
15"
(380 mm)
34
1
/8
"
(868 mm)
30¼
"
(766 mm)
1
/4
"
(6 mm)
15"
(380 mm)
15"
(380 mm)
34
1
/8
"
(868 mm)
30¼
"
(766 mm)
1
/4
"
(6 mm)
7
Drawer Depth Dimensions
Style 1 - Euro Series (side view)
Style 2 - Overlay (side view)
Drawer Width Dimensions
Style 1- Euro Series (top view)
Style 2 - Overlay (top view)
Custom Overlay Drawer Panels
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
■ The thickness of the overlay panels must be ³⁄₄" (19 mm).
■ To avoid damage to the drawers, each overlay panel must not
weigh more than 10
lbs (4.5 kg).
■ Do not exceed the height dimension for the overlay panels.
Panels that exceed the height dimension may damage the
refrigerator drawers, cabinets or countertop.
■ The width of the overlay panels may vary according to the
width of the cabinet opening.
■ For the installation of the customer panel, you will need the
following parts:
■ 16 screws (SS Flat M4x12 tapping 1)
■ 4 Self-tap wood screws
■ 4 Drawer overlay hook plate right (SPHC T=2.3)
■ 4 Drawer overlay hook plate left (SPHC T=2.3)
NOTE: Some or all parts may or may not be included. If your
product does not include these parts, contact Assistance or
Service or ask a specialist.
*Dimension includes
³⁄₄
" (19 mm) thick custom drawer panel
19
7
/8
"
(505 mm)
21
5
/8
"
(550 mm)
43
5
/8
"
(1108 mm)
19
7
/8
"
(505 mm)
21
5
/8
"
(550 mm)
*
23
7
/8"
(606 mm)
23
7
/8
"
(606 mm)
21
5
/8"
(550 mm)
26"
(660 mm)
*Dimension includes
³⁄₄
" (19 mm) thick custom drawer panel
A. SS Flat M4x12 tapping screws
B. Self-tap wood screws
C. Overlay hook plate right
D. Overlay hook plate left
23
7
/8
"
(606 mm)
23
7
/8
"
(606 mm)
21
5
/8
"
(550 mm)
*
AB
CD
8
Top and Bottom Overlay Drawer Panel Dimensions
INSTALLATION INSTRUCTIONS
Unpack the Refrigerator Drawers
Remove the Packaging
Remove tape and glue residue from surfaces before turning on
the refrigerator drawers. Rub a small amount of liquid dish soap
over the glue residue with your fingers. Wipe with warm water
and dry. Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove tape or glue.
These products can damage the surface of your refrigerator
drawers. Properly dispose of packaging.
Clean Before Using
After you remove all of the package materials, clean the inside of
your refrigerator drawers before using them. See “Cleaning.”
A. Router
¹⁄₈
" (2.5 mm) deep.
Top
Bottom
Back Panel
A
A
4
3
/16
" (107 mm)
1
11
/16
" (43.5 mm)
1
3
/4
" (44 mm)
3
3
/8
"
(86 mm)
3
/8
"
(9 mm)
15
/16
" (23.3 mm)
13
/16
" (20 mm)
7
/16
" (12 mm)
15/16"
(24.3 mm)
1"
(26 mm)
15" (380.5 mm)
23
3
/4
"
(603 mm)
21
1
/8
"
(536.4 mm)
3
3
/
4
" (95 mm)
1
/8
"
(2.5 mm) Holes (Depth
3
/8
" (10mm))
1
/16
"
(2 mm) Holes (Depth
3
/8
" (10mm))
WARNING
Excessive Weight Hazard
Use two or more people to move and install
refrigerator drawer(s).
Failure to do so can result in back or other injury.
When Moving Your Refrigerator Drawers:
Your refrigerator drawers are heavy. When moving the
appliance for service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull
the appliance straight out when moving it. Do not wiggle or
“walk” the appliance when trying to move it, as floor
damage could occur.
9
Connect Water Supply
(Refrigerator/Freezer Drawers only)
Connect to Water Line
1. Unplug refrigerator or disconnect power.
2. Turn OFF main water supply. Turn ON nearest faucet long
enough to clear line of water.
3. Locate a ½" to 1¹⁄₄" (12.5 mm to 31.8 mm) vertical cold water
pipe near the refrigerator.
IMPORTANT:
■ Make sure it is a cold water pipe.
■ Horizontal pipe will work, but drill on the top side of the
pipe, not the bottom. This will help keep water away from
the drill and normal sediment from collecting in the valve.
4. Determine the length of copper tubing you need. Measure
from the connection on the lower left rear of refrigerator to
the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use
¹⁄₄" (6 mm) O.D. (outside diameter) copper tubing. Be sure
both ends of copper tubing are cut square.
5. Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe
you have selected.
6. Fasten the shutoff valve to the cold water pipe with the pipe
clamp. Be sure the outlet end is solidly in the ¹⁄₄" drilled hole
in the water pipe and that the washer is under the pipe clamp.
Tighten the packing nut. Tighten the pipe clamp screws
slowly and evenly so washer makes a watertight seal. Do not
overtighten or you may crush the copper tubing.
7. Slip the compression sleeve and compression nut on the
copper tubing as shown. Insert the end of the tubing into the
outlet end squarely as far as it will go. Screw compression nut
onto outlet end with adjustable wrench. Do not overtighten.
8. Place the free end of the tubing in a container or sink, and
turn ON the main water supply. Flush the tubing until water is
clear. Turn OFF the shutoff valve on the water pipe. Coil the
copper tubing.
Connect to Refrigerator
1. Attach the copper tube to the valve inlet using a compression
nut and sleeve as shown. Tighten the compression nut. Do
not overtighten. Use the tube clamp on the back of the
refrigerator to secure the tubing to the refrigerator as shown.
This will help avoid damage to the tubing when the
refrigerator is pushed back against the wall.
2. Turn ON shutoff valve.
3. Check for leaks. Tighten any connections (including
connections at the valve) or nuts that leak.
4. The ice maker is equipped with a built-in water strainer. If
your water conditions require a second water strainer, install
it in the ¹⁄₄" (6
mm) water line at either tube connection.
Obtain a water strainer from your nearest appliance dealer.
5. Plug in refrigerator or reconnect power.
Move the Refrigerator Drawers to
Final
Location
1. Place top of cardboard carton or plywood under the
appliance. Remove dolly.
2. Do not remove film or cover.
3. Plug into a grounded 3 prong outlet.
4. Move the refrigerator drawers straight back and evenly in
front of the opening.
A. Cold water pipe
B. Pipe clamp
C. Copper tubing
D. Compression nut
E. Compression sleeve
F. Shutoff valve
G. Packing nut
A
B
C
DEF
G
A. Plug
B. Compression nut
C. Pex tubing
A
B
C
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
10
Level the Refrigerator Drawers
IMPORTANT:
■ Overlay Model—Be sure to install the custom overlay drawer
panels before leveling the refrigerator drawers. See “Install
Custom Overlay Panel.”
■ Before installing the refrigerator drawers, be sure that the
countertop is level.
■ If the countertop is not level, adjust the refrigerator drawers’
leveling legs until the appliance is square with the countertop.
Be sure to maintain ³⁄₈" (9.5 mm) minimum gap between the
top of the drawer and the countertop.
1. Open the top drawer and place the level across the top
drawer as shown. Check the level from left to right.
2. Turn the leveling legs (front and back) until the top drawer
measures level from left to right.
3. Remove the level and close the top drawer. Check the gap
between the top of the drawer and the countertop. If the gap
measures less than ³⁄₈" (9.5 mm) minimum, turn all four
leveling bolts equally to the left to raise the leveling legs
(this will lower the appliance). Recheck the level.
4. Open both drawers less than midway. Place the level on
the side flange beside the drawers as shown. Turn the front
leveling bolts together in order to either raise or lower the
appliance until the sides of the refrigerator drawers are
plumb.
5. Remove the level and close the drawers. Recheck the gap
between the top of the drawer and the countertop. If the gap
measures less than ³⁄₈" (9.5
mm), turn all four leveling bolts
equally to raise the leveling legs (this will lower the appliance).
Recheck the level.
NOTE: Be sure to recheck the horizontal level of the top
drawer.
6. Be sure all four levelers are on the floor and supporting the
full weight of the refrigerator drawers.
Install Custom Overlay Panel
IMPORTANT:
■ Create a custom overlay panel according to the
specifications in “Custom Overlay Drawer Panels.”
■ Jenn-Air is not responsible for the removal or addition of
molding or decorative panels that would not allow access
to the refrigerator for service.
Attach the Overlay Panel
NOTE: If the overlay hooks are not installed, see “Custom
Overlay Drawer Panels” for overlay hook locations. The location
of the hooks must be as precise as possible. If the custom panel
is incorrectly placed, the panel may interfere with optimal use of
the drawers.
1. Attach the custom handle of your preference on the overlay
before attaching the overlay to the drawer of the refrigerator.
NOTE: Custom handles may vary in dimensions. Holes must be
made on the panel according the specific dimensions of your
handle.
2. Attach the hooks to their corresponding recessions on the
panel, using the SS Flat M4x12 screws. Two screws are
needed per hook. The hooks must be on the outer edge
of the panel.
3. Gently pull back the gasket from the top corners of the door
until you can see the screw that is behind the gasket. There is
one screw on each side. It is not necessary to remove the
gasket.
4. Remove the screws behind the gasket (one per side).
5. Align the panel to the drawer and position the overlay panel
½" (12.5 mm) higher than the door. Position the overlay hooks
with the pilot holes and push the hooks into the holes. The
drawer has insulant foam in its interior so you may feel some
interference while pushing. Push until the hooks go through
the foam.
6. Push straight down on the overlay panel to secure the overlay
hooks to the drawer.
7. Using the self-tap wood screws (two per drawer; one in each
corner of the drawers), attach the panel to the drawer.
NOTE: Do not put the screws removed in step 4 back on the
door.
8. Once the overlay is securely attached to the drawer with the
two screws, put the gasket back in its place by pressing it
against the door until the gasket is even and firmly secured.
Complete Installation
1. Remove all boxes, parts packages and packing materials
from the interior of the refrigerator drawers.
2. Remove the film.
3. Clean the refrigerator drawers before use.
A. Check the level from left to right.
A. Check the level from front to back.
A
A
11
4. The controls are preset at the factory to the recommended
settings. Be sure that the compressor is operating properly
and that all the lights are working.
5. If construction will continue after the refrigerator drawers
have been installed, turn OFF the power for both drawers.
To get the most efficient use from your new refrigerator drawers,
read the “Refrigerator Drawers Use” section.
REFRIGERATOR
DRAWERS USE
Normal Sounds
Your new refrigerator drawers may make sounds that your old
refrigerator drawers didn’t. Because the sounds are new to you,
you might be concerned about them. Most of the new sounds are
normal. Hard surfaces, such as the floor, walls, and cabinets, can
make the sounds seem louder. The following describes the kinds
of sounds and what may be making them.
■ Your refrigerator drawers are designed to run more efficiently
to keep your food items at the desired temperatures and to
minimize energy usage. The high efficiency compressor and
fans may cause your refrigerator drawers to run longer than
your old ones. You may also hear a pulsating or high-pitched
sound from the compressor or fans adjusting to optimize
performance.
■ You may hear the evaporator fan motor circulating air through
the refrigerator drawers. The fan speed may increase as you
open the drawers or add warm food.
■ As each cycle ends, you may hear a gurgling sound due to
the refrigerant flowing through the sealed system tubing.
■ Contraction and expansion of the inside walls may cause a
popping noise.
■ You may hear air being forced over the condenser by the
condenser fan.
■ You may hear water running into the drain pan during the
Off cycle.
Ensuring Proper Air Circulation
In order to ensure proper temperatures, you need to permit
airflow inside the drawers.
Do not block any airflow vents. If the vents are blocked, airflow
will be obstructed and temperature and moisture problems may
occur.
IMPORTANT: To avoid odor transfer and drying out of food, wrap
or cover foods tightly.
Using the Controls
The control panels for both double drawer models are located in
the upper drawer. To view and set the Upper and Lower control
panel, pull out the upper drawer.
IMPORTANT:
■ Wait 24 hours after you turn on the refrigerator drawers
before you put food into the drawers. If you add food before
the drawers have cooled completely, your food may spoil.
NOTE: Adjusting the controls to a lower (colder) setting in
one or both drawers will not cool them any faster.
■ If the temperature is too warm or too cold in the drawers, first
check the air vents to be sure they are not blocked before
adjusting the controls.
■ The preset settings should be correct for normal household
usage. The refrigerator control is set correctly when milk or
juice is as cold as you like.
■ The freezer control is set correctly when ice cream is firm.
■ The actual temperature may differ from the display when
a drawer is open for an extended period of time.
Turning Drawers On/Off
■ The first time that the drawers are plugged in, the control will
be in Cool Off mode. Cool On and Cool Off will be the only
options that display.
■ Press COOL ON for 3 seconds to turn on the drawers. All
menus and recommended temperature settings will be
displayed.
.
■ The left temperature and presets touch pads control the
temperature of the upper compartment.
■ The right temperature and presets touch pads control the
temperature of the lower compartment.
Viewing Celsius Temperatures
■ Press the F/C touch pad to toggle between displaying the
temperature in degrees Fahrenheit and degrees Celsius.
The corresponding indicator will illuminate.
Style 1: Refrigerator drawer models
Style 2: Refrigerator/freezer combo models
A. F/C touch pad
A
12
Set to Recommended Temperatures
When the refrigerator is turned On for the first time, a
recommended temperature is set by default. The controls
adjust the temperature of both compartments independently.
■ To adjust set point temperatures, press “+” (plus) or “-”
(minus) until the desired temperature setting is reached.
Model JUD24FR*
NOTE: The set point for the double refrigerator drawers model
is 37°F(2°C). The set point range for this model is 32°F to 42°F
(0°C to 5°C) for both compartments.
Model JUD24FC*
NOTE: The set point for the refrigerator/freezer drawers model
is 37°F (2°C) for the refrigerator drawer and 0°F (-17°C) for the
freezer drawer. The set point range for the refrigerator/freezer
drawers model is 32°F to 42°F (0°C to 5°C) for the refrigerator
drawer and -8°F to 6°F (-22°C to -14°C) for the freezer drawer.
NOTE: Wait at least 24 hours between adjustments for the
product to acclimate.
Using Presets
For your convenience, each drawer also has controls that are
preset to recommended storage temperatures for specific
products.
Pressing any preset option will set the temperature to the
recommended temperature for each category:
Refrigerator Drawers
■ Produce: 39°F (3°C)
■ Assorted: 37°F (2°C)
■ Beverage: 34°F (1°C)
■ Meat: 32°F (0°C)
Freezer Drawer
■ Soft Serve: 6°F (-14°C)
NOTE: Soft Serve is a temporary temperature setting that will
only last for 4 hours and returns to the previous temperature
set point when complete.
■ Assorted: 0°F (-17°C)
■ Spirits: -2°F (-18°C)
■ Deep Freeze: -8°F (-22°C)
Max Cool
The Max Cool feature assists with periods of heavy usage, full
grocery loads or temporarily warm room temperatures.
Max Cool will reset the temperature for the refrigerator drawer to
32°F (0°C) and -3°F (-19°C) for the freezer drawer for a 24-hour
period.
■ Press MAX COOL to activate Max Cool feature.
NOTE: The temperature display will remain at -3°F (-19°C) and
the indicator light will remain On for a 24-hour period unless any
of the following happens:
■ User adjusts any of the compartment temperatures
■ Cool Off Mode is entered (activated by user)
■ Sabbath Mode is entered (activated by user)
■ After 24 hours, the temperature will automatically return to
the previous temperature set point and the indicator light will
turn Off.
NOTE: If the previous temperature set point was set to Soft
Serve in the freezer drawer, the temperature will return to the
recommended temperature (0°F/-17°C) instead when Max
Cool is complete.
Sabbath Mode
Sabbath Mode is designed for the traveler or for those whose
religious observances require turning off the lights. By selecting
this feature, the temperature set points remain unchanged, but
the control panel lights, interior lights, and control audio turn
off. For most efficient refrigerator drawers operation, it is
recommended to exit the Sabbath Mode when it is no longer
required.
■ Press and hold SABBATH for 3 seconds to turn on the
feature. After the 3-second countdown, the feature will
activate and all other displays will turn Off.
■ Press and hold SABBATH for 3 seconds to turn off the feature
and turn on the display.
Drawer Open
If any drawer is open longer than 5 minutes, an alarm will sound
every 2 minutes until all drawers are closed or any control is
pressed.
Style 1: Refrigerator drawer models
Style 2: Refrigerator/Freezer combo models
13
Over Temp Alarm
NOTE: If the Over Temp Alarm activates, your food may spoil.
See “Power Interruptions.” Minimize opening of drawers until
temperatures return to normal.
The Over Temperature feature is designed to let you know when
either the refrigerator drawer temperature rises above 45°F (7°C)
or the freezer drawer temperature rises above 6°F (-14°C) for
4 hours or longer. The audio alarm will shut off automatically
when the temperature returns to normal. To let you know an Over
Temperature condition occurred, the indicator light will continue
to flash until the Reset Alarm touch pad is pressed.
If the over temperature condition is still present when an Over
Temp reset is performed, the indicator light will continue to
reactivate every 4
hours until refrigerator and freezer
temperatures are below 45°F (7°C) and 15°F
(-9°C), respectively.
NOTE: These features will not appear on your control unless your
refrigerator is over temperature and the alarm requires a reset.
Showroom Mode
This mode is used only when the refrigerator is on display in a
retail store. If you unintentionally turn on Showroom mode, Cool
Off will light up on the display, and the controls will appear to
work. Exit Showroom mode by pressing and holding COOL ON
and SABBATH at the same time for 3 seconds.
Ice Maker and
Water Filtration System
(Refrigerator/Freezer Drawers only)
IMPORTANT: After connecting the refrigerator to a water source
or replacing the water filter, fill and discard three full containers of
ice to prepare the water filter for use before using ice.
Turning the Ice Maker On/Off
IMPORTANT: Use the Icemaker touch pad on the control panel
to turn on or off the Icemaker. Do not adjust the wire arm located
on the ice maker.
■ Press the ICEMAKER touch pad to turn on the ice maker.
The indicator will illuminate when On.
■ Press the ICEMAKER touch pad to turn off the ice maker.
REMEMBER:
■ Allow 24 hours to produce the first batch of ice.
■ The quality of your ice will only be as good as the quality
of the water supplied to your ice maker.
■ Avoid connecting the ice maker to a softened water supply.
Water softener chemicals (such as salt) can damage parts of
the ice maker and lead to poor quality ice. If a softened water
supply cannot be avoided, make sure the water softener is
operating properly and is well maintained.
■ Do not store anything in the ice storage bin.
Water Filtration System
Water Filter Indicator / Reset Filter
The water filter indicator will help you know when to change your
water filter. The indicator will change from dark to yellow when it
is time to order a new filter.
The indicator will then change from yellow to red when it is time
to replace the water filter.
The disposable water filter should be replaced at least every
6
months. After replacing the water filter, reset the water filter
indicator.
■ Press and hold RESET FILTER for 3 seconds. The indicator
light will turn Off.
NOTE: These features will not appear on your control unless
you need to order or replace your filter.
Changing the Water Filter
The water filter is located through the base grille. You do not have
to remove the base grille in order to change the water filter.
1. Locate the water filter cap in the front base grille. Rotate the
cap counterclockwise to a vertical position and pull the cap
and water filter out through the base grille.
NOTE: There will be water in the filter. Some spilling may
occur.
2. Remove the filter cap by sliding it off the end of the old filter.
The cap will slide to the left or right.
IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
14
3. Take the new water filter out of its packaging and remove
the cover from the O-rings.
4. Slide the filter cap onto the new water filter. See the
illustration in Step
2.
5. With the filter cap in the vertical position, insert the new filter
into the base grille until it stops. Rotate the cartridge cap
clockwise to a horizontal position.
Using the Ice Maker Without the Water Filter
You can run the ice maker without a water filter. Your water will
not be filtered.
1. Slide the filter cap off the end of the water filter. With the filter
cap in the horizontal position, insert the cap into the base
grille until it stops.
IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with a replacement filter.
REFRIGERATOR DRAWERS CARE
Cleaning
The drawers defrost automatically. However, clean both drawers
about once a month to avoid buildup of odors. Wipe up spills
immediately.
To clean your refrigerator drawers:
1. Hand wash, rinse, and dry interior surfaces thoroughly. Use
a clean sponge or soft cloth and a mild detergent in warm
water.
■ Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and drawer liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
■ To help remove odors, you can wash interior walls with
a mixture of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
2. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water. Do
not use abrasive or harsh cleaners. Dry thoroughly with a soft
cloth. To avoid damage to painted metal exteriors, apply
appliance wax (or auto paste wax) with a clean, soft cloth. Do
not wax plastic parts.
NOTE: To keep your Stainless Steel refrigerator drawers
looking like new and to remove minor scuffs or marks, it is
suggested that you use the manufacturer’s approved
Stainless Steel Cleaner and Polish. To order the cleaner,
see “Accessories.”
IMPORTANT: This cleaner is for Stainless Steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to come
into contact with any plastic parts such as the trim pieces or
drawer gaskets. If unintended contact does occur, clean
plastic part with a sponge and mild detergent in warm water.
Dry thoroughly with a soft cloth.
Power Interruptions
If the power will be out for 24 hours or less, keep both refrigerator
drawers closed to help food stay cold.
If the power will be out for more than 24 hours, do one of the
following:
■ Place all perishable food in a food locker or cooler with
dry ice.
■ If neither a food locker or cooler is available, consume food
if still cold or throw away perishable food at once.
Vacation Care
Your refrigerator drawers are equipped with the Sabbath Mode
feature. By selecting this feature, the temperature set points
remain unchanged, but the control panel and interior lights will
turn off. For most efficient refrigerator drawers operation, it is
recommended to exit the Sabbath Mode when it is no longer
required.
If you choose to leave the refrigerator drawers on while
you’re away:
1. Use up any perishables and freeze other items.
2. Press and hold SABBATH for 3 seconds. After countdown,
the display and lights will turn off but the refrigerator
continues with normal operation.
3. When you return from vacation, press and hold SABBATH
for 3 seconds to return to normal operation.
If you choose to turn the refrigerator drawers off
before you leave:
1. Remove all food from the refrigerator drawers.
2. Turn Off the Control Panel for the Upper and the Lower
drawers. See “Using the Controls.”
3. Clean refrigerator drawers, wipe and dry them well.
4. Tape rubber or wood blocks to the tops of both drawers to
prop them open far enough for air to get in. This stops odor
and mold from building up.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
15
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Your refrigerator drawers will not operate
■ Is the power supply cord unplugged? Plug into a grounded
3 prong outlet.
■ Has a household fuse blown, or a circuit breaker tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
■ Is the refrigerator control set to the Cool Off setting?
See “Using the Controls.”
■ Are the refrigerator drawers not cooling? Turn them off
then on again to reset. See “Using the Controls.” If this does
not correct the problem, call for service.
The motor seems to run too much
■ Is the room temperature hotter than normal? The motor
will run longer under warm conditions. At normal room
temperatures, expect your motor to run about 80% of the
time. Under warmer conditions, it will run even more.
■ Has a large amount of food just been added to the
refrigerator drawers? Adding a large amount of food warms
the refrigerator drawers. The motor normally will run longer to
cool the refrigerator drawers back down.
■ Are the drawers opened often? The motor will run longer
when this occurs. Conserve energy by getting all items out
at one time, keeping food organized, and closing the drawer
as soon as possible.
■ Are the controls not set correctly for the surrounding
conditions? See “Using the Controls.”
■ Are the drawers not closed completely? Close the drawers
firmly. If they do not close completely, see “The drawers will
not close completely” later in this section.
■ Are the drawer gaskets not sealed all the way around?
Contact a technician or other qualified person.
The refrigerator drawers seems to make too much
noise
The sounds may be normal for your refrigerator drawers.
See “Normal Sounds.”
The divider between the two compartments is warm
The warmth is probably due to normal operation of the
automatic exterior moisture control. If still concerned, call
for service.
Temperature is too warm
■ Are the air vents blocked in either compartment? This
obstructs cold air movement between the compartments.
Remove any objects from in front of the air vents. See
“Ensuring Proper Air Circulation” for the location of air vents.
■ Are the drawers opened often? The refrigerator drawers will
warm when this occurs. Keep the refrigerator drawers cool by
getting all items out at one time, keeping food organized, and
closing the door as soon as possible.
■ Has a large amount of food just been added to the
refrigerator drawers? Adding a large amount of food warms
the refrigerator drawers. It can take several hours for the
refrigerator drawers to return to the normal temperature.
■ Are the controls set correctly for the surrounding
conditions? See “Using the Controls.”
■ Are the refrigerator drawers not cooling? Turn them off
then on again to reset. See “Using the Controls.” If this does
not correct the problem, call for service.
There is interior moisture buildup
■ Are the air vents blocked in the refrigerator drawers?
Remove any objects from in front of the air vents. See
“Ensuring Proper Air Circulation” for the location of air vents.
■ Are the drawers opened often? Avoid humidity buildup by
getting all items out at one time, keeping food organized, and
closing the drawer as soon as possible.
■ Is the room humid? It is normal for moisture to build up
inside the refrigerator drawers when the room air is humid.
■ Is the food packaged correctly? Check that all food is
securely wrapped. Dry damp food containers before placing
in the refrigerator drawers.
■ Are the controls set correctly for the surrounding
conditions? See “Using the Controls.”
The drawers will not close completely
■ Are food packages blocking the drawer open? Rearrange
containers so that they fit more tightly and take up less
space.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
16
The drawers are difficult to open
■ Are the gaskets dirty or sticky? Clean gaskets and the
surface that they touch. Rub a thin coat of paraffin wax on the
gaskets following cleaning.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
only use factory specified replacement parts. Factory specified
replacement parts will fit right and work right because they are
made with the same precision used to build every new Jenn-Air
appliance.
To locate factory specified parts in your area, call us or your
nearest designated service center.
In the U.S.A.
Call the Jenn-Air Customer eXperience Center
toll free: 1-800-JENNAIR (1-800-536-6247).
Our consultants provide assistance with:
■ Features and specifications on our full line of appliances.
■ Installation information.
■ Use and maintenance procedures.
■ Accessory and repair parts sales.
■ Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
■ Referrals to local dealers, repair parts distributors, and
service companies. Jenn-Air designated service technicians
are trained to fulfill the product warranty and provide after-
warranty service anywhere in the United States.
To locate the Jenn-Air designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
For further assistance
If you need further assistance, you can write to Jenn-Air with any
questions or concerns at:
Jenn-Air Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
In Canada
Call the Jenn-Air Canada Customer eXperience Centre toll free:
1-800-JENNAIR (1-800-536-6247).
Our consultants provide assistance with:
■ Features and specifications on our full line of appliances.
■ Use and maintenance procedures.
■ Accessory and repair parts sales.
■ Referrals to local dealers, repair parts distributors, and
services companies. Jenn-Air Canada designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to Jenn-Air Canada
with any questions or concerns at:
Jenn-Air Brand Home Appliances
Customer eXperience Centre
200 – 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
Accessories
To order accessories, call 1-800-JENNAIR (1-800-536-6247).
and ask for the appropriate part number listed below or contact
your authorized Jenn-Air dealer.
Replacement water filter:
Order Part #4396701
affresh
®
Kitchen & Appliance Cleaner:
In U.S.A., order part #W10355010
In Canada, order part # W10355010B
affresh® Stainless Steel Cleaner:
In U.S.A., order part #W10355016
In Canada, order part # W10355016B
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
17
PRODUCT DATA SHEETS
Base Grille Water Filtration System
Model WF-L200V Capacity 200 Gallons (757 Liters)
Model WF-NL120V Capacity 120 Gallons (454 Liters))
This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of
the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for
water leaving the system, as specified in ANSI/NSF 42/53.
Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 63°F
(17.2°C).
■ It is essential that operational, maintenance, and filter
replacement requirements be carried out for the product to
perform as advertised.
■ Model WF-L200V: The filter monitor system measures the
amount of water that passes through the filter and alerts you
to replace the filter. When 90% of the filter’s rated life is used,
the filter indicator light changes from green to yellow. When
100% of the filter’s rated life is used, the filter indicator light
changes from yellow to red, and it is recommended that you
replace the filter. Use replacement cartridge L200V / NL120V,
part #4396702. 2014 suggested retail price of $32.99 U.S.A./
$49.99 Canada. Prices are subject to change without notice.
Model WF-NL120V: Change the water filter cartridge every
6-9 months. Use replacement cartridge L200V / NL120V, part
#4396702. 2014 suggested retail price of $32.99 U.S.A./
$49.99 Canada. Prices are subject to change without notice.
■ The product is for cold water use only.
■ Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system.
■ Refer to the front cover or “Accessories” section for the
Manufacturer’s name, address and telephone number.
■ Refer to the “Warranty” section for the Manufacturer’s limited
warranty.
Application Guidelines/Water Supply Parameters
Substance Reduction
Aesthetic Effects
NSF Reduction
Requirements
Average
Influent
Influent Challenge
Concentration
Maximum
Effluent
Average
Effluent
Minimum %
Reduction
Average %
Reduction
Chlorine Taste/Odor
Particulate Class III*
≥50%
≥85%
1.9 mg/L
49,333/mL
2.0 mg/L ± 10%
At least 10,000 particles/mL
0.07 mg/L
640 mg/L**
0.06 mg/L
312 mg/L
>75.0%
98.7%
>75.0%
99%
Contaminant
Reduction
NSF Reduction
Requirements
Average
Influent
Influent Challenge
Concentration
Maximum
Effluent
Average
Effluent
Minimum %
Reduction
Average %
Reduction
Lead: @ pH 6.5
Lead: @ pH 8.5
0.01mg/L
0.01mg/L
0.14 mg/L***
0.15 mg/L***
0.15 mg/L ± 10%
0.15 mg/L ± 10%
0.0014 mg/L
0.0069 mg/L
0.0011 mg/L
0.0042 mg/L
99.0%
95.4%
99.21%
97.08%
Mercury: @ pH 6.5
Mercury: @ pH 8.5
0.002 mg/L
0.002 mg/L
0.0059 mg/L
0.0054 mg/L
0.006 mg/L ± 10%
0.006 mg/L ± 10%
0.0009 mg/L
0.0007 mg/L
0.0004 mg/L
0.00043 mg/L
84.74%
87.03%
92.47%
91.93%
Benzene 0.0050 mg/L 0.0157 mg/L 0.015 ± 10% 0.002 mg/L 0.00083 mg/L 87.26% 94.71%
p-dichlorobenzene 0.075 mg/L 0.210 mg/L 0.225 ± 10% 0.0005 mg/L 0.0005 mg/L 99.76% 99.76%
Tested and certified by NSF International against ANSI/NSF Standard
42 for the reduction of Chlorine, Taste and Odor, Particulate Class lll*;
and against ANSI/NSF Standard 53 for the reduction of Lead,
Mercury, Benzene, and p-dichlorobenzene.
Water Supply
Water Pressure
Water Temperature
Service Flow Rate
City or Well
30 - 120 psi (207 - 827 kPa)
33° - 100°F (0.6° - 37.8° C)
0.5 GPM (1.89 L/min.) @ 60 psi.
*
**
***
Class III particle size: >5 to <15 um
Test requirement is at least 10,000 particles/mL of AC Fine Test Dust.
These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.
® NSF is a registered trademark of NSF International.
18
12/14
JENN-AIR
®
REFRIGERATION
LIMITED WARRANTY
ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED
TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call the
Customer eXperience Center:
■ Name, address and telephone number
■ Model number and serial number
■ A clear, detailed description of the problem
■ Proof of purchase including dealer or retailer name and address
IF YOU NEED SERVICE:
1. Before contacting us to arrange service, please determine whether your product requires repair. Some questions
can be addressed without service. Please take a few minutes to review the Troubleshooting or Problem Solver
section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit
https://jennair.custhelp.com.
2. All warranty service is provided exclusively by our authorized Jenn-Air Service Providers. In the U.S. and
Canada, direct all requests for warranty service to:
Jenn-Air Customer eXperience Center
1-800-JENNAIR (1-800-536-6247)
If outside the 50 United States or Canada, contact your authorized Jenn-Air dealer to determine whether another warranty applies.
https://jennair.custhelp.com
FIVE YEAR LIMITED WARRANTY
WHAT IS COVERED WHAT IS NOT COVERED
TWO YEAR LIMITED WARRANTY
For two years from the date of purchase, when this major appliance is
installed, operated and maintained according to instructions attached
to or furnished with the product, Jenn-Air brand of Whirlpool
Corporation or Whirlpool Canada LP (hereafter “Jenn-Air”) will pay for
Factory Specified Replacement Parts and repair labor to correct
defects in materials or workmanship that existed when this major
appliance was purchased, or at its sole discretion replace the
product. In the event of product replacement, your appliance will be
warranted for the remaining term of the original unit's warranty
period.
THIRD THROUGH FIFTH YEAR LIMITED WARRANTY ON CAVITY
LINER AND SEALED REFRIGERATION SYSTEM
In the third through fifth years from the date of purchase, when this
major appliance is installed, operated and maintained according to
the instructions attached to or furnished with the product, Jenn-Air
brand will pay for factory specified replacement parts and repair
labor for the following components to correct non-cosmetic defects
in materials and workmanship in this part that prevent function of the
refrigerator and that existed when this major appliance was
purchased:
■ Refrigerator/freezer cavity liner if the part cracks due to defective
materials or workmanship.
■ Sealed Refrigeration system (includes compressor, evaporator,
condenser, dryer and connecting tubing).
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
Service must be provided by a Jenn-Air designated service company.
This limited warranty is valid only in the United States or Canada and
applies only when the major appliance is used in the country in which
it was purchased. This limited warranty is effective from the date of
original consumer purchase. Proof of original purchase date is
required to obtain service under this limited warranty.
1. Commercial, non-residential or multiple-family use, or use inconsistent
with published user, operator or installation instructions.
2. In-home Instruction on how to use your product.
3. Service to correct improper product maintenance or installation,
installation not in accordance with electrical or plumbing codes or
correction of household electrical or plumbing (i.e. house wiring, fuses or
water inlet hoses).
4. Consumable parts (i.e. light bulbs, batteries, air or water filters,
preservation solutions, etc.).
5. Defects or damage caused by the use of non-genuine Jenn-Air parts or
accessories.
6. Damage from accident, misuse, abuse, fire, floods, acts of God or use
with products not approved by Jenn-Air.
7. Repairs to parts or systems to correct product damage or defects
caused by unauthorized service, alteration or modification of the
appliance.
8. Cosmetic damage including scratches, dents, chips, and other damage
to appliance finishes unless such damage results from defects in
materials and workmanship and is reported to Jenn-Air within 30 days.
9. Discoloration, rust or oxidation of surfaces resulting from caustic or
corrosive environments including but not limited to high salt
concentrations, high moisture or humidity or exposure to chemicals.
10. Food or medicine loss due to product failure.
11. Pick-up or delivery. This product is intended for in-home repair.
12. Travel or transportation expenses for service in remote locations where
an authorized Jenn-Air servicer is not available.
13. Removal or reinstallation of inaccessible appliances or built-in fixtures
(i.e. trim, decorative panels, flooring, cabinetry, islands, countertops,
drywall, etc.) that interfere with servicing, removal or replacement of the
product.
14. Service or parts for appliances with original model/serial numbers
removed, altered or not easily determined.
The cost of repair or replacement under these excluded circumstances
shall be borne by the customer.
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow
limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific
legal rights, and you also may have other rights that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Jenn-Air makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations
contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you
should ask Jenn-Air or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. JENN-AIR
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of
incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and
you also may have other rights that vary from state to state or province to province.
19
SEGURIDAD DE LOS CAJONES REFRIGERADOS
Si no sigue las instrucciones de inmediato, usted puede
morir o sufrir una lesión grave.
Si no sigue las instrucciones, usted puede morir o sufrir
una lesión grave.
Todos los mensajes de seguridad le dirán el peligro potencial, le dirán cómo reducir las posibilidades de sufrir una lesión y lo que
puede suceder si no se siguen las instrucciones.
Su seguridad y la seguridad de los demás es muy importante.
Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre
todos los mensajes de seguridad.
ADVERTENCIA
PELIGRO
Este es el símbolo de advertencia de seguridad.
Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a
usted y a los demás.
Todos los mensajes de seguridad irán a continuación del símbolo de advertencia de seguridad y de la palabra
“PELIGRO” o “ADVERTENCIA”. Estas palabras significan:
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
ADVERTENCIA:
Para reducir el riesgo de incendio, choque eléctrico, o lesiones personales al usar su(s) cajón(cajones)
GUARDE ESTAS INSTRUCCIONES
■
Conecte a un contacto de pared de conexión a tierra de
3 terminales.
■
No quite la terminal de conexión a tierra.
■
No use un adaptador.
■
No use un cable eléctrico de extensión.
■
Desconecte el suministro de energía antes de darle servicio.
■
Vuelva a colocar todos los componentes y paneles antes de
hacerlo funcionar.
■
Remueva la puerta o el(los) cajón(cajones) de su aparato
refrigerado viejo.
■
Use un limpiador no inflamable.
■
Mantenga los materiales y vapores inflamables, tales como
gasolina, alejados del(de los) cajón(cajones) refrigerado(s).
■
Use dos o más personas para mover e instalar el(los)
cajón(cajones) refrigerado(s).
refrigerado(s) siga estas precauciones básicas:
Advertencias de la Proposición 65 del estado de California:
ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como
causantes de cáncer.
ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como
causantes de defectos congénitos o algún otro tipo de daños en la función reproductora.
20
Cómo deshacerse
adecuadamente de su
aparato
refrigerado viejo
IMPORTANTE: El atrapamiento y asfixia de niños no es un
problema del pasado. Un aparato refrigerado tirado o
abandonado es un peligro, aún si va a quedar ahí “por unos
pocos días”. Si Ud. está por deshacerse de su aparato
refrigerado viejo, por favor siga las instrucciones que se dan
a continuación para prevenir accidentes.
Antes de descartar su aparato refrigerado viejo:
Saque la puerta o el(los) cajón(cajones).
ESPECIFICACIONES DE DISEÑO
Modelos de cajón de 24"
ADVERTENCIA
Peligro de Asfixia
Remueva la puerta o el(los) cajón(cajones) de su
aparato refrigerado viejo.
No seguir esta instrucción puede ocasionar la muerte
o daño al cerebro.
Información importante para saber acerca del desecho
de refrigerantes:
Deshágase del refrigerador siguiendo los reglamentos
federales y locales. Los refrigerantes deberán ser evacuados
por un técnico certificado en refrigeración por EPA (Agencia
de protección del medioambiente) según los procedimientos
establecidos.
Dos cajones refrigeradores
Dos cajones refrigeradores proveen opciones adicionales de almacenamiento en la cocina u otras áreas del hogar.
Serie Euro
JUD24FR*S
Revestimiento - Se requieren paneles y manijas a la medida
JUD24FR*X
Cajones refrigerador/congelador (con fábrica de hielo y filtro de agua)
El cajón superior refrigerador y el cajón inferior congelador proveen opciones adicionales de almacenamiento en la cocina u otras
áreas del hogar. La fábrica de hielo, instalada de fábrica, en el cajón inferior asegura un suministro constante de hielo disponible en
todo momento.
Serie Euro
JUD24FC*S
Revestimiento - Se requieren paneles y manijas a la medida
JUD24FC*X
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
dans d''autres langues
- English: JennAir JIC4715GS User guide
- español: JennAir JIC4715GS Guía del usuario
Documents connexes
Autres documents
-
Jenn-Air JUDFP242HL Le manuel du propriétaire
-
-
Whirlpool KDDC24CVS Mode d'emploi
-
KitchenAid KDDC24RVS Manuel utilisateur
-
KitchenAid KUDR204EPA Le manuel du propriétaire
-
-
KitchenAid KUDF204EPA01 Le manuel du propriétaire
-
-
SharkBite 25032 Guide d'installation