JennAir JUD24FC X Series Mode d'emploi

Marque: JennAir

Modèle: JUD24FC X Series

Catégorie: Frigos

Taper: Mode d'emploi

Ce manuel convient également à

JENN-AIR

DOUBLE REFRIGERATOR DRAWERS/

REFRIGERATOR/FREEZER DRAWERS/

CAJÓN REFRIGERADOR DOBLE

CAJÓN REFRIGERADOR/CONGELADOR JENN-AIR

DOUBLE TIROIR RÉFRIGÉRÉ

TIROIRS DE RÉFRIGÉRATION/CONGÉLATION JENN-AIR

W10741583C/8336460125000C

USE & CARE GUIDE

For questions about features, operation/performance, parts, accessories, or service, call:

1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call: 1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.ca.

MANUAL DE USO Y CUIDADO

Si tiene preguntas respecto a las características, funcionamiento, rendimiento, partes, accesorios o servicio técnico, llame al:

1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet www.jennair.com.

En Canadá, llame al: 1-800-JENNAIR (1-800-536-6247), o visite nuestro sitio de internet www.jennair.ca.

GUIDE D’UTILISATION ET D’ENTRETIEN

Au Canada, pour assistance, installation ou service, composez le 1-800-JENNAIR (1-800-536-6247)

visitez notre site web à www.jennair.ca.

Table of Contents/Índice/Table des matières...................................................................................... 2

TABLE OF CONTENTS

REFRIGERATOR DRAWERS SAFETY..........................................3

Proper Disposal of Your Old Refrigerated Appliance..................3

DESIGN SPECIFICATIONS............................................................4

INSTALLATION REQUIREMENTS................................................5

Tools and Parts ............................................................................5

Location Requirements................................................................5

Electrical Requirements ...............................................................5

Water Supply Requirements........................................................6

Product Dimensions.....................................................................6

Custom Overlay Drawer Panels...................................................7

INSTALLATION INSTRUCTIONS..................................................8

Unpack the Refrigerator Drawers ................................................8

Connect Water Supply.................................................................9

Move the Refrigerator Drawers to Final Location........................9

Level the Refrigerator Drawers ..................................................10

Install Custom Overlay Panel.....................................................10

Complete Installation .................................................................10

REFRIGERATOR

DRAWERS USE ............................................................................11

Normal Sounds...........................................................................11

Ensuring Proper Air Circulation..................................................11

Using the Controls......................................................................11

Ice Maker and Water Filtration System......................................13

REFRIGERATOR DRAWERS CARE............................................14

Cleaning......................................................................................14

Power Interruptions....................................................................14

Vacation Care.............................................................................14

TROUBLESHOOTING ..................................................................15

ASSISTANCE OR SERVICE.........................................................16

In the U.S.A. ...............................................................................16

In Canada ...................................................................................16

Accessories ................................................................................16

PRODUCT DATA SHEETS...........................................................17

WARRANTY ..................................................................................18

ÍNDICE

SEGURIDAD DE LOS CAJONES REFRIGERADOS ..................19

Cómo deshacerse adecuadamente

de su aparato refrigerado viejo..................................................20

ESPECIFICACIONES DE DISEÑO ..............................................20

REQUISITOS DE INSTALACIÓN.................................................21

Piezas y herramientas ................................................................21

Requisitos de ubicación.............................................................21

Requisitos eléctricos..................................................................21

Requisitos del suministro de agua.............................................22

Medidas del producto................................................................22

Paneles de los cajones recubiertos a la medida.......................23

INSTRUCCIONES DE INSTALACIÓN.........................................24

Cómo desempacar los cajones refrigerados.............................24

Conexión del suministro de agua ..............................................24

Mueva los cajones refrigerados a su posición final...................25

Nivelación de los cajones refrigerados......................................26

Cómo instalar el panel recubierto a la medida..........................26

Complete la instalación..............................................................27

USO DE LOS CAJONES REFRIGERADOS ................................27

Sonidos normales.......................................................................27

Cómo asegurar la debida circulación de aire............................27

Uso de los controles ..................................................................27

Fábrica de hielo y sistema de filtración de agua .......................29

CUIDADO DE LOS CAJONES REFRIGERADOS.......................30

Limpieza .....................................................................................30

Cortes de corriente.....................................................................31

Cuidado durante las vacaciones................................................31

SOLUCIÓN DE PROBLEMAS......................................................31

AYUDA O SERVICIO TÉCNICO...................................................33

En los EE.UU. .............................................................................33

En Canadá..................................................................................33

Accesorios..................................................................................33

HOJA DE DATOS DEL PRODUCTO ...........................................34

GARANTÍA.....................................................................................35

TABLE DES MATIÈRES

SÉCURITÉ DES TIROIRS RÉFRIGÉRÉS....................................37

Mise au rebut correcte de votre vieil appareil réfrigéré.............38

SPÉCIFICATIONS DU DESIGN ...................................................38

EXIGENCES D’INSTALLATION...................................................39

Outillage et pièces......................................................................39

Exigences d’emplacement.........................................................39

Spécifications électriques..........................................................40

Spécifications de l’alimentation en eau .....................................40

Dimensions du produit...............................................................40

Panneaux décoratifs personnalisés de tiroirs............................41

INSTRUCTIONS D’INSTALLATION ............................................43

Déballage des tiroirs réfrigérés ..................................................43

Raccordement de l'alimentation en eau....................................43

Déplacement des tiroirs réfrigérés à leur emplacement final....44

Réglage de l'aplomb des tiroirs réfrigérés.................................44

Installation du panneau décoratif personnalisé.........................45

Achever l'installation ..................................................................45

UTILISATION DES TIROIRS RÉFRIGÉRÉS................................45

Sons normaux ............................................................................45

Pour assurer une circulation d'air correcte................................45

Utilisation des commandes........................................................46

Machine à glaçons et système de filtration d’eau .....................48

ENTRETIEN DES TIROIRS RÉFRIGÉRÉS..................................49

Nettoyage ...................................................................................49

Pannes de courant .....................................................................49

Entretien avant les vacances .....................................................49

DÉPANNAGE.................................................................................50

ASSISTANCE OU SERVICE.........................................................51

Aux États-Unis............................................................................51

Au Canada..................................................................................51

Accessoires ................................................................................51

FEUILLES DE DONNÉES SUR LE PRODUIT.............................52

GARANTIE.....................................................................................53

REFRIGERATOR DRAWERS SAFETY

Proper Disposal of Your Old

Refrigerated Appliance

IMPORTANT: Child entrapment and suffocation are not problems

of the past. A junked or abandoned refrigerated appliance is still

dangerous–even if it will sit for “just a few days.” If you are getting

rid of your old refrigerated appliance, please follow these

instructions to help prevent accidents.

Before You Throw Away Your Old

Refrigerated

Appliance:

Remove the door or drawer(s).

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electric shock, or injury when using your refrigerator drawer(s), follow these basic

SAVE THESE INSTRUCTIONS

■ Plug into a grounded 3 prong outlet.

■ Do not remove ground prong.

■ Do not use an adapter.

■ Do not use an extension cord.

■ Disconnect power before servicing.

■ Replace all parts and panels before operating.

■ Remove door or drawer(s) from your old refrigerated

appliance.

■ Use nonflammable cleaner.

■ Keep flammable materials and vapors, such as gasoline,

away from refrigerator drawer(s).

■ Use two or more people to move and install refrigerator

drawer(s).

precautions:

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

WARNING

Suffocation Hazard

Remove door or drawer(s) from your old refrigerated

appliance.

Failure to do so can result in death or brain damage.

Important information to know about disposal of

refrigerants:

Dispose of refrigerator in accordance with Federal and Local

regulations. Refrigerants must be evacuated by a licensed,

EPA certified refrigerant technician in accordance with

established procedures.

DESIGN SPECIFICATIONS

24" Drawer Models

Double Refrigerator Drawers

Two refrigerator drawers provide additional storage options in the kitchen or other areas of the home.

Euro Series

JUD24FR*S

Overlay - Custom Panels and Handles Required

JUD24FR*X

Refrigerator/Freezer Drawers (with ice maker and water filter)

Upper refrigerator drawer and lower freezer drawer provide additional storage options in the kitchen or other areas of the home.

Factory-installed ice maker in lower drawer ensures a constant supply of ice on hand at all times.

Euro Series

JUD24FC*S

Overlay - Custom Panels and Handles Required

JUD24FC*X

INSTALLATION REQUIREMENTS

Tools and Parts

Tools Needed:

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

Additional Tools Needed (Style 2 - Overlay only):

Parts Needed (Style 2 - Overlay only):

Parts Supplied:

Location Requirements

NOTES:

■ For the refrigerator drawers to be flush with the front of the

base cabinets remove any baseboards or moldings from the

rear of the opening. See “Product Dimensions” and later in

this section “Opening Dimensions (both styles).”

■ It is recommended that you do not install the refrigerator

drawers near an oven, radiator, or other heat source.

■ Do not install in a location where the temperature will fall

below 55°F (13°C).

Opening Dimensions (both styles)

■ Height dimensions are shown with the leveling legs extended

to the minimum height of ¹⁄₄" (6

mm) below the refrigerator

drawers.

NOTE: When leveling legs are fully extended to 1" (25 mm)

below the refrigerator drawers, add ³⁄₄" (19

mm) to the height

dimensions. See “Product Dimensions.”

■ If the floor of the opening is not level with the kitchen floor,

shim the opening to make it level with the kitchen floor.

Electrical Requirements

Before you move your refrigerator drawers into the final location,

it is important to make sure you have the proper electrical

connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your refrigerator drawers be provided. Use

an outlet that cannot be turned off by a switch. Do not use an

extension cord.

IMPORTANT: If this product is connected to a GFCI

(Ground

Fault Circuit Interrupter) equipped outlet, nuisance

tripping of the power supply may occur, resulting in loss of

cooling. Food quality and flavor may be affected. If nuisance

tripping has occurred, and if the condition of the food appears

poor, dispose of it.

■ Cordless drill

■ ¹⁄₈" Drill bit

■ Tape measure

■ Level

■ Phillips screwdriver

■ Scissors

■ Pencil

■ Scribe

■ Custom Overlay Drawer Panels —

See “Custom Overlay Drawer Panels.”

■ Hardware

■ Hooks (8)

■ Screws (16)

■ Self-tap wood screws (4)

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator drawer(s).

Failure to do so can result in death, explosion, or fire.

Critical Dimensions:

A. Utility opening

B. Minimum opening width

/8" (873 mm) min.

35" (889 mm) max.

/4"

(375 mm)

/2"

(13 mm)

" (609.6 mm) min.

(609.6 mm)

min.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Water Supply Requirements

(Refrigerator/Freezer Drawers only)

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

IMPORTANT:

■ If you turn ON the refrigerator before the water line is

connected, turn OFF the ice maker.

■ All installations must meet local plumbing code requirements.

■ Use copper tubing and check for leaks. Install copper tubing

only in areas where the household temperatures will remain

above freezing.

TOOLS NEEDED: Flat-blade screwdriver, ⁷⁄₁₆" and ¹⁄₂" open-end

wrenches or two adjustable wrenches, ¹⁄₄" nut driver and drill bit,

cordless drill.

NOTE: Your refrigerator dealer has a kit available with a

¹⁄₄" (6 mm) saddle-type shutoff valve, a union, and copper tubing.

Before purchasing, make sure a saddle-type valve complies

with your local plumbing codes. Do not use a piercing-type or

³⁄₁₆" (4.76

mm) saddle valve which reduces water flow and clogs

more easily.

Water Pressure

A cold water supply with water pressure of between 30 and

120

psi (207 and 827 kPa) is required to operate ice maker. If

you have questions about your water pressure, call a licensed,

qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of

a reverse osmosis system going to the water inlet valve of the

refrigerator needs to be between 30

and 120 psi (207 and

827

kPa).

If a reverse osmosis water filtration system is connected to your

cold water supply, the water pressure to the reverse osmosis

system needs to be a minimum of 40

to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

to 60 psi (276 to 414 kPa):

■ Check to see whether the sediment filter in the reverse

osmosis system is blocked. Replace the filter if necessary.

■ Allow the storage tank on the reverse osmosis system to refill

after heavy usage.

If you have questions about your water pressure, call a licensed,

qualified plumber.

Product Dimensions

Drawer Height Dimensions

■ Height dimensions are shown with the leveling legs extended

to ¹⁄₄" (6

mm) below the refrigerator drawers.

■ When leveling legs are fully extended to 1" (25 mm) below

the refrigerator drawers, add ³⁄₄" (19 mm) to the height

dimensions.

■ The power cord is 60" (1.52 m) long.

Style 1 - Euro Series (front view)

Style 2 - Overlay (front view)

15"

(380 mm)

15"

(380 mm)

(868 mm)

30¼

(766 mm)

(6 mm)

15"

(380 mm)

15"

(380 mm)

(868 mm)

30¼

(766 mm)

(6 mm)

Drawer Depth Dimensions

Style 1 - Euro Series (side view)

Style 2 - Overlay (side view)

Drawer Width Dimensions

Style 1- Euro Series (top view)

Style 2 - Overlay (top view)

Custom Overlay Drawer Panels

If you plan to install custom wood panels, you will need to create

the panels yourself or consult a qualified cabinetmaker or

carpenter. See dimension drawings for panel specifications.

IMPORTANT:

■ The thickness of the overlay panels must be ³⁄₄" (19 mm).

■ To avoid damage to the drawers, each overlay panel must not

weigh more than 10

lbs (4.5 kg).

■ Do not exceed the height dimension for the overlay panels.

Panels that exceed the height dimension may damage the

refrigerator drawers, cabinets or countertop.

■ The width of the overlay panels may vary according to the

width of the cabinet opening.

■ For the installation of the customer panel, you will need the

following parts:

■ 16 screws (SS Flat M4x12 tapping 1)

■ 4 Self-tap wood screws

■ 4 Drawer overlay hook plate right (SPHC T=2.3)

■ 4 Drawer overlay hook plate left (SPHC T=2.3)

NOTE: Some or all parts may or may not be included. If your

product does not include these parts, contact Assistance or

Service or ask a specialist.

*Dimension includes

³⁄₄

" (19 mm) thick custom drawer panel

(505 mm)

(550 mm)

(1108 mm)

(505 mm)

(550 mm)

/8"

(606 mm)

/8"

(550 mm)

26"

(660 mm)

*Dimension includes

³⁄₄

" (19 mm) thick custom drawer panel

A. SS Flat M4x12 tapping screws

B. Self-tap wood screws

C. Overlay hook plate right

D. Overlay hook plate left

(606 mm)

(550 mm)

Top and Bottom Overlay Drawer Panel Dimensions

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator Drawers

Remove the Packaging

Remove tape and glue residue from surfaces before turning on

the refrigerator drawers. Rub a small amount of liquid dish soap

over the glue residue with your fingers. Wipe with warm water

and dry. Do not use sharp instruments, rubbing alcohol,

flammable fluids, or abrasive cleaners to remove tape or glue.

These products can damage the surface of your refrigerator

drawers. Properly dispose of packaging.

Clean Before Using

After you remove all of the package materials, clean the inside of

your refrigerator drawers before using them. See “Cleaning.”

A. Router

¹⁄₈

" (2.5 mm) deep.

Top

Bottom

Back Panel

/16

" (107 mm)

/16

" (43.5 mm)

" (44 mm)

(86 mm)

(9 mm)

/16

" (23.3 mm)

/16

" (20 mm)

/16

" (12 mm)

15/16"

(24.3 mm)

(26 mm)

15" (380.5 mm)

(603 mm)

(536.4 mm)

" (95 mm)

(2.5 mm) Holes (Depth

" (10mm))

/16

(2 mm) Holes (Depth

" (10mm))

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator drawer(s).

Failure to do so can result in back or other injury.

When Moving Your Refrigerator Drawers:

Your refrigerator drawers are heavy. When moving the

appliance for service, be sure to cover the floor with

cardboard or hardboard to avoid floor damage. Always pull

the appliance straight out when moving it. Do not wiggle or

“walk” the appliance when trying to move it, as floor

damage could occur.

Connect Water Supply

(Refrigerator/Freezer Drawers only)

Connect to Water Line

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a ½" to 1¹⁄₄" (12.5 mm to 31.8 mm) vertical cold water

pipe near the refrigerator.

IMPORTANT:

■ Make sure it is a cold water pipe.

■ Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from

the drill and normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure

from the connection on the lower left rear of refrigerator to

the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use

¹⁄₄" (6 mm) O.D. (outside diameter) copper tubing. Be sure

both ends of copper tubing are cut square.

5. Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe

you have selected.

6. Fasten the shutoff valve to the cold water pipe with the pipe

clamp. Be sure the outlet end is solidly in the ¹⁄₄" drilled hole

in the water pipe and that the washer is under the pipe clamp.

Tighten the packing nut. Tighten the pipe clamp screws

slowly and evenly so washer makes a watertight seal. Do not

overtighten or you may crush the copper tubing.

7. Slip the compression sleeve and compression nut on the

copper tubing as shown. Insert the end of the tubing into the

outlet end squarely as far as it will go. Screw compression nut

onto outlet end with adjustable wrench. Do not overtighten.

8. Place the free end of the tubing in a container or sink, and

turn ON the main water supply. Flush the tubing until water is

clear. Turn OFF the shutoff valve on the water pipe. Coil the

copper tubing.

Connect to Refrigerator

1. Attach the copper tube to the valve inlet using a compression

nut and sleeve as shown. Tighten the compression nut. Do

not overtighten. Use the tube clamp on the back of the

refrigerator to secure the tubing to the refrigerator as shown.

This will help avoid damage to the tubing when the

refrigerator is pushed back against the wall.

2. Turn ON shutoff valve.

3. Check for leaks. Tighten any connections (including

connections at the valve) or nuts that leak.

4. The ice maker is equipped with a built-in water strainer. If

your water conditions require a second water strainer, install

it in the ¹⁄₄" (6

mm) water line at either tube connection.

Obtain a water strainer from your nearest appliance dealer.

5. Plug in refrigerator or reconnect power.

Move the Refrigerator Drawers to

Final

Location

1. Place top of cardboard carton or plywood under the

appliance. Remove dolly.

2. Do not remove film or cover.

3. Plug into a grounded 3 prong outlet.

4. Move the refrigerator drawers straight back and evenly in

front of the opening.

A. Cold water pipe

B. Pipe clamp

C. Copper tubing

D. Compression nut

E. Compression sleeve

F. Shutoff valve

G. Packing nut

DEF

A. Plug

B. Compression nut

C. Pex tubing

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Level the Refrigerator Drawers

IMPORTANT:

■ Overlay Model—Be sure to install the custom overlay drawer

panels before leveling the refrigerator drawers. See “Install

Custom Overlay Panel.”

■ Before installing the refrigerator drawers, be sure that the

countertop is level.

■ If the countertop is not level, adjust the refrigerator drawers’

leveling legs until the appliance is square with the countertop.

Be sure to maintain ³⁄₈" (9.5 mm) minimum gap between the

top of the drawer and the countertop.

1. Open the top drawer and place the level across the top

drawer as shown. Check the level from left to right.

2. Turn the leveling legs (front and back) until the top drawer

measures level from left to right.

3. Remove the level and close the top drawer. Check the gap

between the top of the drawer and the countertop. If the gap

measures less than ³⁄₈" (9.5 mm) minimum, turn all four

leveling bolts equally to the left to raise the leveling legs

(this will lower the appliance). Recheck the level.

4. Open both drawers less than midway. Place the level on

the side flange beside the drawers as shown. Turn the front

leveling bolts together in order to either raise or lower the

appliance until the sides of the refrigerator drawers are

plumb.

5. Remove the level and close the drawers. Recheck the gap

between the top of the drawer and the countertop. If the gap

measures less than ³⁄₈" (9.5

mm), turn all four leveling bolts

equally to raise the leveling legs (this will lower the appliance).

Recheck the level.

NOTE: Be sure to recheck the horizontal level of the top

drawer.

6. Be sure all four levelers are on the floor and supporting the

full weight of the refrigerator drawers.

Install Custom Overlay Panel

IMPORTANT:

■ Create a custom overlay panel according to the

specifications in “Custom Overlay Drawer Panels.”

■ Jenn-Air is not responsible for the removal or addition of

molding or decorative panels that would not allow access

to the refrigerator for service.

Attach the Overlay Panel

NOTE: If the overlay hooks are not installed, see “Custom

Overlay Drawer Panels” for overlay hook locations. The location

of the hooks must be as precise as possible. If the custom panel

is incorrectly placed, the panel may interfere with optimal use of

the drawers.

1. Attach the custom handle of your preference on the overlay

before attaching the overlay to the drawer of the refrigerator.

NOTE: Custom handles may vary in dimensions. Holes must be

made on the panel according the specific dimensions of your

handle.

2. Attach the hooks to their corresponding recessions on the

panel, using the SS Flat M4x12 screws. Two screws are

needed per hook. The hooks must be on the outer edge

of the panel.

3. Gently pull back the gasket from the top corners of the door

until you can see the screw that is behind the gasket. There is

one screw on each side. It is not necessary to remove the

gasket.

4. Remove the screws behind the gasket (one per side).

5. Align the panel to the drawer and position the overlay panel

½" (12.5 mm) higher than the door. Position the overlay hooks

with the pilot holes and push the hooks into the holes. The

drawer has insulant foam in its interior so you may feel some

interference while pushing. Push until the hooks go through

the foam.

6. Push straight down on the overlay panel to secure the overlay

hooks to the drawer.

7. Using the self-tap wood screws (two per drawer; one in each

corner of the drawers), attach the panel to the drawer.

NOTE: Do not put the screws removed in step 4 back on the

door.

8. Once the overlay is securely attached to the drawer with the

two screws, put the gasket back in its place by pressing it

against the door until the gasket is even and firmly secured.

Complete Installation

1. Remove all boxes, parts packages and packing materials

from the interior of the refrigerator drawers.

2. Remove the film.

3. Clean the refrigerator drawers before use.

A. Check the level from left to right.

A. Check the level from front to back.

4. The controls are preset at the factory to the recommended

settings. Be sure that the compressor is operating properly

and that all the lights are working.

5. If construction will continue after the refrigerator drawers

have been installed, turn OFF the power for both drawers.

To get the most efficient use from your new refrigerator drawers,

read the “Refrigerator Drawers Use” section.

REFRIGERATOR

DRAWERS USE

Normal Sounds

Your new refrigerator drawers may make sounds that your old

refrigerator drawers didn’t. Because the sounds are new to you,

you might be concerned about them. Most of the new sounds are

normal. Hard surfaces, such as the floor, walls, and cabinets, can

make the sounds seem louder. The following describes the kinds

of sounds and what may be making them.

■ Your refrigerator drawers are designed to run more efficiently

to keep your food items at the desired temperatures and to

minimize energy usage. The high efficiency compressor and

fans may cause your refrigerator drawers to run longer than

your old ones. You may also hear a pulsating or high-pitched

sound from the compressor or fans adjusting to optimize

performance.

■ You may hear the evaporator fan motor circulating air through

the refrigerator drawers. The fan speed may increase as you

open the drawers or add warm food.

■ As each cycle ends, you may hear a gurgling sound due to

the refrigerant flowing through the sealed system tubing.

■ Contraction and expansion of the inside walls may cause a

popping noise.

■ You may hear air being forced over the condenser by the

condenser fan.

■ You may hear water running into the drain pan during the

Off cycle.

Ensuring Proper Air Circulation

In order to ensure proper temperatures, you need to permit

airflow inside the drawers.

Do not block any airflow vents. If the vents are blocked, airflow

will be obstructed and temperature and moisture problems may

occur.

IMPORTANT: To avoid odor transfer and drying out of food, wrap

or cover foods tightly.

Using the Controls

The control panels for both double drawer models are located in

the upper drawer. To view and set the Upper and Lower control

panel, pull out the upper drawer.

IMPORTANT:

■ Wait 24 hours after you turn on the refrigerator drawers

before you put food into the drawers. If you add food before

the drawers have cooled completely, your food may spoil.

NOTE: Adjusting the controls to a lower (colder) setting in

one or both drawers will not cool them any faster.

■ If the temperature is too warm or too cold in the drawers, first

check the air vents to be sure they are not blocked before

adjusting the controls.

■ The preset settings should be correct for normal household

usage. The refrigerator control is set correctly when milk or

juice is as cold as you like.

■ The freezer control is set correctly when ice cream is firm.

■ The actual temperature may differ from the display when

a drawer is open for an extended period of time.

Turning Drawers On/Off

■ The first time that the drawers are plugged in, the control will

be in Cool Off mode. Cool On and Cool Off will be the only

options that display.

■ Press COOL ON for 3 seconds to turn on the drawers. All

menus and recommended temperature settings will be

displayed.

■ The left temperature and presets touch pads control the

temperature of the upper compartment.

■ The right temperature and presets touch pads control the

temperature of the lower compartment.

Viewing Celsius Temperatures

■ Press the F/C touch pad to toggle between displaying the

temperature in degrees Fahrenheit and degrees Celsius.

The corresponding indicator will illuminate.

Style 1: Refrigerator drawer models

Style 2: Refrigerator/freezer combo models

A. F/C touch pad

Set to Recommended Temperatures

When the refrigerator is turned On for the first time, a

recommended temperature is set by default. The controls

adjust the temperature of both compartments independently.

■ To adjust set point temperatures, press “+” (plus) or “-”

(minus) until the desired temperature setting is reached.

Model JUD24FR*

NOTE: The set point for the double refrigerator drawers model

is 37°F(2°C). The set point range for this model is 32°F to 42°F

(0°C to 5°C) for both compartments.

Model JUD24FC*

NOTE: The set point for the refrigerator/freezer drawers model

is 37°F (2°C) for the refrigerator drawer and 0°F (-17°C) for the

freezer drawer. The set point range for the refrigerator/freezer

drawers model is 32°F to 42°F (0°C to 5°C) for the refrigerator

drawer and -8°F to 6°F (-22°C to -14°C) for the freezer drawer.

NOTE: Wait at least 24 hours between adjustments for the

product to acclimate.

Using Presets

For your convenience, each drawer also has controls that are

preset to recommended storage temperatures for specific

products.

Pressing any preset option will set the temperature to the

recommended temperature for each category:

Refrigerator Drawers

■ Produce: 39°F (3°C)

■ Assorted: 37°F (2°C)

■ Beverage: 34°F (1°C)

■ Meat: 32°F (0°C)

Freezer Drawer

■ Soft Serve: 6°F (-14°C)

NOTE: Soft Serve is a temporary temperature setting that will

only last for 4 hours and returns to the previous temperature

set point when complete.

■ Assorted: 0°F (-17°C)

■ Spirits: -2°F (-18°C)

■ Deep Freeze: -8°F (-22°C)

Max Cool

The Max Cool feature assists with periods of heavy usage, full

grocery loads or temporarily warm room temperatures.

Max Cool will reset the temperature for the refrigerator drawer to

32°F (0°C) and -3°F (-19°C) for the freezer drawer for a 24-hour

period.

■ Press MAX COOL to activate Max Cool feature.

NOTE: The temperature display will remain at -3°F (-19°C) and

the indicator light will remain On for a 24-hour period unless any

of the following happens:

■ User adjusts any of the compartment temperatures

■ Cool Off Mode is entered (activated by user)

■ Sabbath Mode is entered (activated by user)

■ After 24 hours, the temperature will automatically return to

the previous temperature set point and the indicator light will

turn Off.

NOTE: If the previous temperature set point was set to Soft

Serve in the freezer drawer, the temperature will return to the

recommended temperature (0°F/-17°C) instead when Max

Cool is complete.

Sabbath Mode

Sabbath Mode is designed for the traveler or for those whose

religious observances require turning off the lights. By selecting

this feature, the temperature set points remain unchanged, but

the control panel lights, interior lights, and control audio turn

off. For most efficient refrigerator drawers operation, it is

recommended to exit the Sabbath Mode when it is no longer

required.

■ Press and hold SABBATH for 3 seconds to turn on the

feature. After the 3-second countdown, the feature will

activate and all other displays will turn Off.

■ Press and hold SABBATH for 3 seconds to turn off the feature

and turn on the display.

Drawer Open

If any drawer is open longer than 5 minutes, an alarm will sound

every 2 minutes until all drawers are closed or any control is

pressed.

Style 1: Refrigerator drawer models

Style 2: Refrigerator/Freezer combo models

Over Temp Alarm

NOTE: If the Over Temp Alarm activates, your food may spoil.

See “Power Interruptions.” Minimize opening of drawers until

temperatures return to normal.

The Over Temperature feature is designed to let you know when

either the refrigerator drawer temperature rises above 45°F (7°C)

or the freezer drawer temperature rises above 6°F (-14°C) for

4 hours or longer. The audio alarm will shut off automatically

when the temperature returns to normal. To let you know an Over

Temperature condition occurred, the indicator light will continue

to flash until the Reset Alarm touch pad is pressed.

If the over temperature condition is still present when an Over

Temp reset is performed, the indicator light will continue to

reactivate every 4

hours until refrigerator and freezer

temperatures are below 45°F (7°C) and 15°F

(-9°C), respectively.

NOTE: These features will not appear on your control unless your

refrigerator is over temperature and the alarm requires a reset.

Showroom Mode

This mode is used only when the refrigerator is on display in a

retail store. If you unintentionally turn on Showroom mode, Cool

Off will light up on the display, and the controls will appear to

work. Exit Showroom mode by pressing and holding COOL ON

and SABBATH at the same time for 3 seconds.

Ice Maker and

Water Filtration System

(Refrigerator/Freezer Drawers only)

IMPORTANT: After connecting the refrigerator to a water source

or replacing the water filter, fill and discard three full containers of

ice to prepare the water filter for use before using ice.

Turning the Ice Maker On/Off

IMPORTANT: Use the Icemaker touch pad on the control panel

to turn on or off the Icemaker. Do not adjust the wire arm located

on the ice maker.

■ Press the ICEMAKER touch pad to turn on the ice maker.

The indicator will illuminate when On.

■ Press the ICEMAKER touch pad to turn off the ice maker.

REMEMBER:

■ Allow 24 hours to produce the first batch of ice.

■ The quality of your ice will only be as good as the quality

of the water supplied to your ice maker.

■ Avoid connecting the ice maker to a softened water supply.

Water softener chemicals (such as salt) can damage parts of

the ice maker and lead to poor quality ice. If a softened water

supply cannot be avoided, make sure the water softener is

operating properly and is well maintained.

■ Do not store anything in the ice storage bin.

Water Filtration System

Water Filter Indicator / Reset Filter

The water filter indicator will help you know when to change your

water filter. The indicator will change from dark to yellow when it

is time to order a new filter.

The indicator will then change from yellow to red when it is time

to replace the water filter.

The disposable water filter should be replaced at least every

months. After replacing the water filter, reset the water filter

indicator.

■ Press and hold RESET FILTER for 3 seconds. The indicator

light will turn Off.

NOTE: These features will not appear on your control unless

you need to order or replace your filter.

Changing the Water Filter

The water filter is located through the base grille. You do not have

to remove the base grille in order to change the water filter.

1. Locate the water filter cap in the front base grille. Rotate the

cap counterclockwise to a vertical position and pull the cap

and water filter out through the base grille.

NOTE: There will be water in the filter. Some spilling may

occur.

2. Remove the filter cap by sliding it off the end of the old filter.

The cap will slide to the left or right.

IMPORTANT: Do not discard the cap. It is part of your

refrigerator. Keep the cap to use with the replacement filter.

Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or

after the system.

3. Take the new water filter out of its packaging and remove

the cover from the O-rings.

4. Slide the filter cap onto the new water filter. See the

illustration in Step

5. With the filter cap in the vertical position, insert the new filter

into the base grille until it stops. Rotate the cartridge cap

clockwise to a horizontal position.

Using the Ice Maker Without the Water Filter

You can run the ice maker without a water filter. Your water will

not be filtered.

1. Slide the filter cap off the end of the water filter. With the filter

cap in the horizontal position, insert the cap into the base

grille until it stops.

IMPORTANT: Do not discard the cap. It is part of your

refrigerator. Keep the cap to use with a replacement filter.

REFRIGERATOR DRAWERS CARE

Cleaning

The drawers defrost automatically. However, clean both drawers

about once a month to avoid buildup of odors. Wipe up spills

immediately.

To clean your refrigerator drawers:

1. Hand wash, rinse, and dry interior surfaces thoroughly. Use

a clean sponge or soft cloth and a mild detergent in warm

water.

■ Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and drawer liners or gaskets. Do not use paper towels,

scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

■ To help remove odors, you can wash interior walls with

a mixture of warm water and baking soda (2 tbs to 1 qt

[26 g to 0.95 L] of water).

2. Wash stainless steel and painted metal exteriors with a clean

sponge or soft cloth and a mild detergent in warm water. Do

not use abrasive or harsh cleaners. Dry thoroughly with a soft

cloth. To avoid damage to painted metal exteriors, apply

appliance wax (or auto paste wax) with a clean, soft cloth. Do

not wax plastic parts.

NOTE: To keep your Stainless Steel refrigerator drawers

looking like new and to remove minor scuffs or marks, it is

suggested that you use the manufacturer’s approved

Stainless Steel Cleaner and Polish. To order the cleaner,

see “Accessories.”

IMPORTANT: This cleaner is for Stainless Steel parts only!

Do not allow the Stainless Steel Cleaner and Polish to come

into contact with any plastic parts such as the trim pieces or

drawer gaskets. If unintended contact does occur, clean

plastic part with a sponge and mild detergent in warm water.

Dry thoroughly with a soft cloth.

Power Interruptions

If the power will be out for 24 hours or less, keep both refrigerator

drawers closed to help food stay cold.

If the power will be out for more than 24 hours, do one of the

following:

■ Place all perishable food in a food locker or cooler with

dry ice.

■ If neither a food locker or cooler is available, consume food

if still cold or throw away perishable food at once.

Vacation Care

Your refrigerator drawers are equipped with the Sabbath Mode

feature. By selecting this feature, the temperature set points

remain unchanged, but the control panel and interior lights will

turn off. For most efficient refrigerator drawers operation, it is

recommended to exit the Sabbath Mode when it is no longer

required.

If you choose to leave the refrigerator drawers on while

you’re away:

1. Use up any perishables and freeze other items.

2. Press and hold SABBATH for 3 seconds. After countdown,

the display and lights will turn off but the refrigerator

continues with normal operation.

3. When you return from vacation, press and hold SABBATH

for 3 seconds to return to normal operation.

If you choose to turn the refrigerator drawers off

before you leave:

1. Remove all food from the refrigerator drawers.

2. Turn Off the Control Panel for the Upper and the Lower

drawers. See “Using the Controls.”

3. Clean refrigerator drawers, wipe and dry them well.

4. Tape rubber or wood blocks to the tops of both drawers to

prop them open far enough for air to get in. This stops odor

and mold from building up.

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Your refrigerator drawers will not operate

■ Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

■ Has a household fuse blown, or a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem

continues, call an electrician.

■ Is the refrigerator control set to the Cool Off setting?

See “Using the Controls.”

■ Are the refrigerator drawers not cooling? Turn them off

then on again to reset. See “Using the Controls.” If this does

not correct the problem, call for service.

The motor seems to run too much

■ Is the room temperature hotter than normal? The motor

will run longer under warm conditions. At normal room

temperatures, expect your motor to run about 80% of the

time. Under warmer conditions, it will run even more.

■ Has a large amount of food just been added to the

refrigerator drawers? Adding a large amount of food warms

the refrigerator drawers. The motor normally will run longer to

cool the refrigerator drawers back down.

■ Are the drawers opened often? The motor will run longer

when this occurs. Conserve energy by getting all items out

at one time, keeping food organized, and closing the drawer

as soon as possible.

■ Are the controls not set correctly for the surrounding

conditions? See “Using the Controls.”

■ Are the drawers not closed completely? Close the drawers

firmly. If they do not close completely, see “The drawers will

not close completely” later in this section.

■ Are the drawer gaskets not sealed all the way around?

Contact a technician or other qualified person.

The refrigerator drawers seems to make too much

noise

The sounds may be normal for your refrigerator drawers.

See “Normal Sounds.”

The divider between the two compartments is warm

The warmth is probably due to normal operation of the

automatic exterior moisture control. If still concerned, call

for service.

Temperature is too warm

■ Are the air vents blocked in either compartment? This

obstructs cold air movement between the compartments.

Remove any objects from in front of the air vents. See

“Ensuring Proper Air Circulation” for the location of air vents.

■ Are the drawers opened often? The refrigerator drawers will

warm when this occurs. Keep the refrigerator drawers cool by

getting all items out at one time, keeping food organized, and

closing the door as soon as possible.

■ Has a large amount of food just been added to the

refrigerator drawers? Adding a large amount of food warms

the refrigerator drawers. It can take several hours for the

refrigerator drawers to return to the normal temperature.

■ Are the controls set correctly for the surrounding

conditions? See “Using the Controls.”

■ Are the refrigerator drawers not cooling? Turn them off

then on again to reset. See “Using the Controls.” If this does

not correct the problem, call for service.

There is interior moisture buildup

■ Are the air vents blocked in the refrigerator drawers?

Remove any objects from in front of the air vents. See

“Ensuring Proper Air Circulation” for the location of air vents.

■ Are the drawers opened often? Avoid humidity buildup by

getting all items out at one time, keeping food organized, and

closing the drawer as soon as possible.

■ Is the room humid? It is normal for moisture to build up

inside the refrigerator drawers when the room air is humid.

■ Is the food packaged correctly? Check that all food is

securely wrapped. Dry damp food containers before placing

in the refrigerator drawers.

■ Are the controls set correctly for the surrounding

conditions? See “Using the Controls.”

The drawers will not close completely

■ Are food packages blocking the drawer open? Rearrange

containers so that they fit more tightly and take up less

space.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

The drawers are difficult to open

■ Are the gaskets dirty or sticky? Clean gaskets and the

surface that they touch. Rub a thin coat of paraffin wax on the

gaskets following cleaning.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

“Troubleshooting.” It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

only use factory specified replacement parts. Factory specified

replacement parts will fit right and work right because they are

made with the same precision used to build every new Jenn-Air

appliance.

To locate factory specified parts in your area, call us or your

nearest designated service center.

In the U.S.A.

Call the Jenn-Air Customer eXperience Center

toll free: 1-800-JENNAIR (1-800-536-6247).

Our consultants provide assistance with:

■ Features and specifications on our full line of appliances.

■ Installation information.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

■ Referrals to local dealers, repair parts distributors, and

service companies. Jenn-Air designated service technicians

are trained to fulfill the product warranty and provide after-

warranty service anywhere in the United States.

To locate the Jenn-Air designated service company in your

area, you can also look in your telephone directory Yellow

Pages.

For further assistance

If you need further assistance, you can write to Jenn-Air with any

questions or concerns at:

Jenn-Air Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada

Call the Jenn-Air Canada Customer eXperience Centre toll free:

1-800-JENNAIR (1-800-536-6247).

Our consultants provide assistance with:

■ Features and specifications on our full line of appliances.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Referrals to local dealers, repair parts distributors, and

services companies. Jenn-Air Canada designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to Jenn-Air Canada

with any questions or concerns at:

Jenn-Air Brand Home Appliances

Customer eXperience Centre

200 – 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

Accessories

To order accessories, call 1-800-JENNAIR (1-800-536-6247).

and ask for the appropriate part number listed below or contact

your authorized Jenn-Air dealer.

Replacement water filter:

Order Part #4396701

affresh

Kitchen & Appliance Cleaner:

In U.S.A., order part #W10355010

In Canada, order part # W10355010B

affresh® Stainless Steel Cleaner:

In U.S.A., order part #W10355016

In Canada, order part # W10355016B

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

PRODUCT DATA SHEETS

Base Grille Water Filtration System

Model WF-L200V Capacity 200 Gallons (757 Liters)

Model WF-NL120V Capacity 120 Gallons (454 Liters))

This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of

the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for

water leaving the system, as specified in ANSI/NSF 42/53.

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 63°F

(17.2°C).

■ It is essential that operational, maintenance, and filter

replacement requirements be carried out for the product to

perform as advertised.

■ Model WF-L200V: The filter monitor system measures the

amount of water that passes through the filter and alerts you

to replace the filter. When 90% of the filter’s rated life is used,

the filter indicator light changes from green to yellow. When

100% of the filter’s rated life is used, the filter indicator light

changes from yellow to red, and it is recommended that you

replace the filter. Use replacement cartridge L200V / NL120V,

part #4396702. 2014 suggested retail price of $32.99 U.S.A./

$49.99 Canada. Prices are subject to change without notice.

Model WF-NL120V: Change the water filter cartridge every

6-9 months. Use replacement cartridge L200V / NL120V, part

#4396702. 2014 suggested retail price of $32.99 U.S.A./

$49.99 Canada. Prices are subject to change without notice.

■ The product is for cold water use only.

■ Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or after

the system.

■ Refer to the front cover or “Accessories” section for the

Manufacturer’s name, address and telephone number.

■ Refer to the “Warranty” section for the Manufacturer’s limited

warranty.

Application Guidelines/Water Supply Parameters

Substance Reduction

Aesthetic Effects

NSF Reduction

Requirements

Average

Influent

Influent Challenge

Concentration

Maximum

Effluent

Average

Effluent

Minimum %

Reduction

Average %

Reduction

Chlorine Taste/Odor

Particulate Class III*

≥50%

≥85%

1.9 mg/L

49,333/mL

2.0 mg/L ± 10%

At least 10,000 particles/mL

0.07 mg/L

640 mg/L**

0.06 mg/L

312 mg/L

>75.0%

98.7%

>75.0%

99%

Contaminant

Reduction

NSF Reduction

Requirements

Average

Influent

Influent Challenge

Concentration

Maximum

Effluent

Average

Effluent

Minimum %

Reduction

Average %

Reduction

Lead: @ pH 6.5

Lead: @ pH 8.5

0.01mg/L

0.14 mg/L***

0.15 mg/L***

0.15 mg/L ± 10%

0.0014 mg/L

0.0069 mg/L

0.0011 mg/L

0.0042 mg/L

99.0%

95.4%

99.21%

97.08%

Mercury: @ pH 6.5

Mercury: @ pH 8.5

0.002 mg/L

0.0059 mg/L

0.0054 mg/L

0.006 mg/L ± 10%

0.0009 mg/L

0.0007 mg/L

0.0004 mg/L

0.00043 mg/L

84.74%

87.03%

92.47%

91.93%

Benzene 0.0050 mg/L 0.0157 mg/L 0.015 ± 10% 0.002 mg/L 0.00083 mg/L 87.26% 94.71%

p-dichlorobenzene 0.075 mg/L 0.210 mg/L 0.225 ± 10% 0.0005 mg/L 0.0005 mg/L 99.76% 99.76%

Tested and certified by NSF International against ANSI/NSF Standard

42 for the reduction of Chlorine, Taste and Odor, Particulate Class lll*;

and against ANSI/NSF Standard 53 for the reduction of Lead,

Mercury, Benzene, and p-dichlorobenzene.

Water Supply

Water Pressure

Water Temperature

Service Flow Rate

City or Well

30 - 120 psi (207 - 827 kPa)

33° - 100°F (0.6° - 37.8° C)

0.5 GPM (1.89 L/min.) @ 60 psi.

***

Class III particle size: >5 to <15 um

Test requirement is at least 10,000 particles/mL of AC Fine Test Dust.

These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.

® NSF is a registered trademark of NSF International.

12/14

JENN-AIR

REFRIGERATION

LIMITED WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you call the

Customer eXperience Center:

■ Name, address and telephone number

■ Model number and serial number

■ A clear, detailed description of the problem

■ Proof of purchase including dealer or retailer name and address

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some questions

can be addressed without service. Please take a few minutes to review the Troubleshooting or Problem Solver

section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit

https://jennair.custhelp.com.

2. All warranty service is provided exclusively by our authorized Jenn-Air Service Providers. In the U.S. and

Canada, direct all requests for warranty service to:

Jenn-Air Customer eXperience Center

1-800-JENNAIR (1-800-536-6247)

If outside the 50 United States or Canada, contact your authorized Jenn-Air dealer to determine whether another warranty applies.

https://jennair.custhelp.com

FIVE YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

TWO YEAR LIMITED WARRANTY

For two years from the date of purchase, when this major appliance is

installed, operated and maintained according to instructions attached

to or furnished with the product, Jenn-Air brand of Whirlpool

Corporation or Whirlpool Canada LP (hereafter “Jenn-Air”) will pay for

Factory Specified Replacement Parts and repair labor to correct

defects in materials or workmanship that existed when this major

appliance was purchased, or at its sole discretion replace the

product. In the event of product replacement, your appliance will be

warranted for the remaining term of the original unit's warranty

period.

THIRD THROUGH FIFTH YEAR LIMITED WARRANTY ON CAVITY

LINER AND SEALED REFRIGERATION SYSTEM

In the third through fifth years from the date of purchase, when this

major appliance is installed, operated and maintained according to

the instructions attached to or furnished with the product, Jenn-Air

brand will pay for factory specified replacement parts and repair

labor for the following components to correct non-cosmetic defects

in materials and workmanship in this part that prevent function of the

refrigerator and that existed when this major appliance was

purchased:

■ Refrigerator/freezer cavity liner if the part cracks due to defective

materials or workmanship.

■ Sealed Refrigeration system (includes compressor, evaporator,

condenser, dryer and connecting tubing).

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

Service must be provided by a Jenn-Air designated service company.

This limited warranty is valid only in the United States or Canada and

applies only when the major appliance is used in the country in which

it was purchased. This limited warranty is effective from the date of

original consumer purchase. Proof of original purchase date is

required to obtain service under this limited warranty.

1. Commercial, non-residential or multiple-family use, or use inconsistent

with published user, operator or installation instructions.

2. In-home Instruction on how to use your product.

3. Service to correct improper product maintenance or installation,

installation not in accordance with electrical or plumbing codes or

correction of household electrical or plumbing (i.e. house wiring, fuses or

water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water filters,

preservation solutions, etc.).

5. Defects or damage caused by the use of non-genuine Jenn-Air parts or

accessories.

6. Damage from accident, misuse, abuse, fire, floods, acts of God or use

with products not approved by Jenn-Air.

7. Repairs to parts or systems to correct product damage or defects

caused by unauthorized service, alteration or modification of the

appliance.

8. Cosmetic damage including scratches, dents, chips, and other damage

to appliance finishes unless such damage results from defects in

materials and workmanship and is reported to Jenn-Air within 30 days.

9. Discoloration, rust or oxidation of surfaces resulting from caustic or

corrosive environments including but not limited to high salt

concentrations, high moisture or humidity or exposure to chemicals.

10. Food or medicine loss due to product failure.

11. Pick-up or delivery. This product is intended for in-home repair.

12. Travel or transportation expenses for service in remote locations where

an authorized Jenn-Air servicer is not available.

13. Removal or reinstallation of inaccessible appliances or built-in fixtures

(i.e. trim, decorative panels, flooring, cabinetry, islands, countertops,

drywall, etc.) that interfere with servicing, removal or replacement of the

product.

14. Service or parts for appliances with original model/serial numbers

removed, altered or not easily determined.

The cost of repair or replacement under these excluded circumstances

shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow

limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific

legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Jenn-Air makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations

contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you

should ask Jenn-Air or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. JENN-AIR

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of

incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and

you also may have other rights that vary from state to state or province to province.

SEGURIDAD DE LOS CAJONES REFRIGERADOS

Si no sigue las instrucciones de inmediato, usted puede

morir o sufrir una lesión grave.

Si no sigue las instrucciones, usted puede morir o sufrir

una lesión grave.

Todos los mensajes de seguridad le dirán el peligro potencial, le dirán cómo reducir las posibilidades de sufrir una lesión y lo que

puede suceder si no se siguen las instrucciones.

Su seguridad y la seguridad de los demás es muy importante.

Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre

todos los mensajes de seguridad.

ADVERTENCIA

PELIGRO

Este es el símbolo de advertencia de seguridad.

Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a

usted y a los demás.

Todos los mensajes de seguridad irán a continuación del símbolo de advertencia de seguridad y de la palabra

“PELIGRO” o “ADVERTENCIA”. Estas palabras significan:

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

ADVERTENCIA:

Para reducir el riesgo de incendio, choque eléctrico, o lesiones personales al usar su(s) cajón(cajones)

GUARDE ESTAS INSTRUCCIONES

■

Conecte a un contacto de pared de conexión a tierra de

3 terminales.

■

No quite la terminal de conexión a tierra.

■

No use un adaptador.

■

No use un cable eléctrico de extensión.

■

Desconecte el suministro de energía antes de darle servicio.

■

Vuelva a colocar todos los componentes y paneles antes de

hacerlo funcionar.

■

Remueva la puerta o el(los) cajón(cajones) de su aparato

refrigerado viejo.

■

Use un limpiador no inflamable.

■

Mantenga los materiales y vapores inflamables, tales como

gasolina, alejados del(de los) cajón(cajones) refrigerado(s).

■

Use dos o más personas para mover e instalar el(los)

cajón(cajones) refrigerado(s).

refrigerado(s) siga estas precauciones básicas:

Advertencias de la Proposición 65 del estado de California:

ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como

causantes de cáncer.

ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como

causantes de defectos congénitos o algún otro tipo de daños en la función reproductora.

Cómo deshacerse

adecuadamente de su

aparato

refrigerado viejo

IMPORTANTE: El atrapamiento y asfixia de niños no es un

problema del pasado. Un aparato refrigerado tirado o

abandonado es un peligro, aún si va a quedar ahí “por unos

pocos días”. Si Ud. está por deshacerse de su aparato

refrigerado viejo, por favor siga las instrucciones que se dan

a continuación para prevenir accidentes.

Antes de descartar su aparato refrigerado viejo:

Saque la puerta o el(los) cajón(cajones).

ESPECIFICACIONES DE DISEÑO

Modelos de cajón de 24"

ADVERTENCIA

Peligro de Asfixia

Remueva la puerta o el(los) cajón(cajones) de su

aparato refrigerado viejo.

No seguir esta instrucción puede ocasionar la muerte

o daño al cerebro.

Información importante para saber acerca del desecho

de refrigerantes:

Deshágase del refrigerador siguiendo los reglamentos

federales y locales. Los refrigerantes deberán ser evacuados

por un técnico certificado en refrigeración por EPA (Agencia

de protección del medioambiente) según los procedimientos

establecidos.

Dos cajones refrigeradores

Dos cajones refrigeradores proveen opciones adicionales de almacenamiento en la cocina u otras áreas del hogar.

Serie Euro

JUD24FR*S

Revestimiento - Se requieren paneles y manijas a la medida

JUD24FR*X

Cajones refrigerador/congelador (con fábrica de hielo y filtro de agua)

El cajón superior refrigerador y el cajón inferior congelador proveen opciones adicionales de almacenamiento en la cocina u otras

áreas del hogar. La fábrica de hielo, instalada de fábrica, en el cajón inferior asegura un suministro constante de hielo disponible en

todo momento.

Serie Euro

JUD24FC*S

Revestimiento - Se requieren paneles y manijas a la medida

JUD24FC*X

La page charge ...

JennAir JUD24FC X Series Mode d'emploi

Marque: JennAir

Modèle: JUD24FC X Series

Catégorie: Frigos

Taper: Mode d'emploi

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: JennAir JUD24FC X Series User guide
español: JennAir JUD24FC X Series Guía del usuario

JennAir JUD24FC X Series Mode d'emploi

Ce manuel convient également à

JennAir JUD24FC X Series Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents