Philips DVD VCR Combo DVD750VR Manuel utilisateur

Marque: Philips

Modèle: DVD VCR Combo DVD750VR

Catégorie: Lecteurs de cassettes

Taper: Manuel utilisateur

Ce manuel convient également à

DVD750VR

DVD750VR

Digital Video Disc Player &

Video Cassette Recorder

Owner’s Manual

NEED HELP?CALL US!

PHILIPS REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS ABOUT

YOUR NEW PRODUCT

.WECAN GUIDE YOU THROUGH CONNECTIONS,FIRST-TIME

SETUP, AND ANY OF THE FEATURES.WEWANT YOU TO START ENJOYING YOUR

NEW PRODUCT RIGHT AWAY

CALL US BEFORE YOU CONSIDER

RETURNING THE PRODUCT

1-800-531-0039

OR VISIT US ON THE WEB AT WWW.PHILIPS.COM

Important!

Return your

Warranty

Registration Card

within 10 days.

See why inside.

STA

-ON

NDB

-ON

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 1

Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a

PHILIPS product. So complete and return the Warranty Registration Card enclosed with your pur-

chase at once.And take advantage of these important benefits.

Return your Warranty Registration card today to

ensure you receive all the

benefits

you’re entitled to.

For Customer Use

Enter below the Serial No.

which is located on the rear of

the cabinet. Retain this infor-

mation for future reference.

Model No.________________

Serial No. ________________

Congratulations on your purchase,

and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.You’ve selected one of

the best-built, best-backed products available today.And we’ll do

everything in our power to keep you happy with your purchase

for many years to come.

As a member of the PHILIPS “family,” you’re entitled to

protection by one of the most comprehensive warranties and

outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the

information and special offers for which you qualify, plus easy

access to accessories from our convenient home shopping

network.

And most importantly you can count on our uncompromising

commitment to your total satisfaction.

All of this is our way of saying welcome-and thanks for investing

in a PHILIPS product.

P.S. Remember, to get the most from your

PHILIPS product, you must return your Warranty

Registration Card within 10 days. So please mail it to

us right now!

Know these

safetysymbols

This “bolt of lightning” indi-

cates uninsulated material

within your unit may cause an

electrical shock. For the safety

of everyone in your household,

please do not remove product

covering.

The “exclamation point”

calls attention to features

for which you should read the

enclosed literature closely to

prevent operating and mainte-

nance problems.

WARNING: TO PREVENT

FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR

MOISTURE.

CAUTION: To prevent elec-

tric shock, match wide blade of

plug to wide slot, fully insert.

ATTENTION:Pour éviter les

choc électriques, introduire la

lame la plus large de la fiche

dans la borne correspondante

de la prise et pousser jusqu’au

fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warranty

Verification

Registering your product within

10days confirms your right to

maximum protection under the

terms and conditions of your

PHILIPS warranty.

Owner

Confirmation

Your completed Warranty

Registration Card serves as

verification of ownership in the

event of product theft or loss.

Model

Registration

Returning your Warranty

Registration Card right away

guarantees you’ll receive all

the information and special

offers which you qualify for as

the owner of your model.

Visit our World Wide Web Site at http://www.philips.com

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 2

Safety and General Information

Safety Precautions

Warning: To prevent fire or shock hazard, do not expose this equipment to rain or

moisture.

Federal Communications Commission (FCC) Warning: Any unauthorized changes or

modifications to this equipment void the user’s authority to operate it.

Department of Health and Human Services (DHHS) Certification: Complies with

1 Center for Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture.

Laser Safety: This unit employs a laser. Only a qualified service person should remove

the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADI-

ATION EXPOSURE.

CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK

DEFEATED. DO NOT STARE INTO BEAM.THE BEAM IS LOCATED INSIDE, NEAR THE

DECK MECHANISM.

Special Information for Canadian Users: This Class B digital apparatus

complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

Radio/TV Interference: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules.These limits

are designed to provide reasonable protection against harmful interference in a residential

installation.This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and the receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

lending of Discs are prohibited.This product incorporates copyright protection technology

that is protected by method claims of certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other rights owners. Use of this copyright

protection technology must be authorized by Macrovision Corporation and is intended for

home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

Note to the Cable TV System Installer: This reminder is provided to call

the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code,

which provides guidelines for proper grounding – in particular, specifying that the cable

ground shall be connected to the grounding system of the building, as close to the point of

cable entry as possible.

Declaration of Conformity

Model Number: DVD750VR

Trade Name: Philips

Responsible Party: Philips Consumer Electronics

P. O . B o x

14810

Knoxville,TN 379

14-1810

(865) 52

1-4316

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of

Dolby Laboratories.

VCR Plus+

and PlusCode

are registered trademarks of Gemstar Development Corporation.The VCR Plus+

system is manufactured under license from Gemstar Development Corporation.

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 3

Table of Contents

General Information

Safety and General Information . . . . . . . . . . . . . . . . .3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Playable Discs and Video Cassettes . . . . . . . . . . . . . .6

Initial DVD/VCR Setup

Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-15

Remote Control Setup . . . . . . . . . . . . . . . . . . . . . .16

First-time DVD/VCR Setup . . . . . . . . . . . . . . . . . . .17

Basic Playback

Video Cassette Playback . . . . . . . . . . . . . . . . . . . . .18

Disc Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Basic DVD/VCR Controls

Display Panel (DVD) . . . . . . . . . . . . . . . . . . . . . . . .20

Display Panel (VCR) . . . . . . . . . . . . . . . . . . . . . . . .2

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Remote Control . . . . . . . . . . . . . . . . . . . . . . . .24-25

Additional VCR Setup

Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . .26-27

Clock (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . .28-29

Language (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

VCR Status Displays . . . . . . . . . . . . . . . . . . . . . . . .31

VCR Recording Options

Videotape Recording . . . . . . . . . . . . . . . . . . . . . . . .32

Recording One Channel/Watching Another . . . . . .33

One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . .34

Rerecording (Tape Duplication) . . . . . . . . . . . . . . . .35

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .36-38

DVD to Videotape Duplication . . . . . . . . . . . . . . . .39

Video Cassette Playing Options

Setting Up the VCR Plus+ Programming System

. . . .40-41

Timer Recording with the VCR Plus+

Programming System . . . . . . . . . . . . . . . . . . . . .42-43

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Ta pe Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Time Search, Index Search . . . . . . . . . . . . . . . . . . . .46

Special Effects Playback . . . . . . . . . . . . . . . . . . . . . .47

Automatic Operation Features . . . . . . . . . . . . . . . .48

Additional VCR Features

Multi-Channel Television Sound . . . . . . . . . . . . .49-50

Hi-Fi Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Disc Playback Features

DVD Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . .52

Fast Forward/Reverse Search . . . . . . . . . . . . . . . . .53

Title/Chapter Playback, Specific Time Playback . . . .54

Track Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Paused and Step-by-Step Playback, Resume . . . . . . .56

Repeat,A-B Repeat . . . . . . . . . . . . . . . . . . . . . . . . .57

Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Subtitles, Camera Angles . . . . . . . . . . . . . . . . . . . . .59

Parental Controls Password . . . . . . . . . . . . . . . . . .60

Parental Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Audio Language, Stereo Sound Mode . . . . . . . . . . .62

DVD Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . .63

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . .64

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .65

MP3/JPEG Playback . . . . . . . . . . . . . . . . . . . . . . . . .66

MP3/JPEG Displays . . . . . . . . . . . . . . . . . . . . . . . . .67

DVD Player Setup Options

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68-69

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70-71

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . .73

Black Level,Virtual Surround . . . . . . . . . . . . . . . . . .74

Information You May Need

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . .75

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . .78-81

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . 82

Information Index . . . . . . . . . . . . . . . . . . . . . . . . . .83

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 4

Introduction

VCR Features

• Automatic Head Cleaner

• Channel Setup

• English, French, and Spanish menus and dis-

plays

• Multi-Channel TV Sound

• 19 Micron head

• Recording: One-Touch and Timer

• Repeat Play

• Searching:Time, Index, Forward, and

Reverse

• Slow Motion

• Still Picture

•Tape Counter

• The VCR Plus+ Programming System

•Tracking Adjustment

Welcome!

This DVD/VCR combines a Digital Video Disc (DVD) Player and a Hi-Fi Video Cassette

Recorder (VCR) into one unit, letting you play DVDs,Audio Compact Discs (Audio

CDs), and Video Cassettes on one piece of equipment.

Read this owner’s manual carefully to learn how to use the features listed below.

Package Contents

The following items are provided with your new DVD/VCR.

• Remote Control and two AA batteries

• One black RF coaxial cable, 75 ohm

• One set of Audio (red and white tips) and Video (yellow tips) cables

• This Owner’s Manual and Quick-Use-Guide

DVD Disc Menus...

Some explanations in this manual describe DVD Disc menus. DVD manufacturers set

the menus, which vary among DVDs. Not all DVDs have menus. If the DVD has a

menu, access it by pressing DVD, then DISC/VCR/MENU on the remote control.

Details are on page 52.

DVD Player Setup Menu...

Some instructions explain how to use the DVD Player’s Setup menu to set up features

of the DVD Player or a DVD.Access the DVD Player menu by pressing

SYSTEM/MENU on the remote control when playback is stopped. Even if a feature is

set in the DVD Player’s menu, it may not be available if the current DVD does not

include that feature.

Available Disc Features...

All features described in this manual are not available on every Disc. If

the feature is not available on the Disc, you cannot use the DVD/VCR

to make it available.An “X” will appear in the top right corner of the

TV screen if you try to access a feature that is not currently available.

Disc Features

• Audio Language choices*

• Bit Rate display

• Camera Angle *

• Dolby Digital Sound*

•DVD to Videotape Duplication

• Dynamic Range Control

• Fast/Paused/Slow/Step-by-Step Playback

• Markers

• Parental Controls*

•Program Playback

•

Progressive Scan

• Random Playback

• Repeat, Repeat A-B

• Screen Saver

• Search (Title/Chapter,Time,Track)

• Subtitles*

• Virtual Surround

• Zoom

* If available on the DVD

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 5

Playable Discs and Video Cassettes

DVD Audio CD CD-RW/CD-R DVD+RW

Region Codes

This DVD/VCR has a Region One (1) DVD Player. DVDs must be labeled for ALL

regions or for Region 1 in order to play on the DVD Player.You cannot play DVDs

that are labeled for other regions. Look for the symbols below on your DVDs. If these

region symbols do not appear on your DVD, you cannot play the DVD in this DVD

Player.

The number inside the globe refers to a region of the world. Region 1 represents the

United States, Canada, upper regions of North America, Bermuda, the U.S.Virgin

Islands, and small regions near Australia.

A DVD labelled for a specific region can only play on DVD Players with the same

region code.

Color Systems

DVDs are recorded in different color systems throughout the world.The most com-

mon color systems are NTSC (which is used primarily in the United States and North

America), PAL, and SECAM.

This DVD Player uses NTSC, so DVDs you play must be recorded in the NTSC sys-

tem.You cannot play DVDs recorded in other formats.The color system of the DVD

may be listed on the DVD or on the Disc case.

Playable Video Cassettes

The VCR of this DVD/VCR has a High Quality (HQ) system and is compatible with

existing Video Home System (VHS) equipment. Use only video cassettes that have the

mark.The use of other tapes may result in poor picture quality and excessive

deposits on the video heads, which may not be covered by the warranty if damage

occurs.

The VCR also has a 19 micron head, which provides a better picture when you view

tapes recorded in slow speed (SLP).

Recordable

ReWritable

Playable Discs

The DVD Player will play Digital Video Discs (DVDs);Audio Compact Discs (CDs); final-

ized Digital Video Discs Rewritable (DVD+RW); and finalized Compact Discs Rewritable

(CD-RW) and Compact Discs Recordable (CD-R).

To play a DVD, make sure it meets the requirements for Region Codes and Color

Systems as described below. Discs that have the following logos will play on the DVD

Player. Other Disc types are not guaranteed to play in the DVD/VCR.

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 6

Hookups

Determining the best possible connection...

Your hookup will be determined primarily by your existing equipment, especially your TV. However, the following

guidelines describe which options have the best picture (video) and sound (audio) quality.You will not use all the

jacks on the DVD/VCR.

If your TV only has an RF-style jack, usually labelled Antenna In, RF In, or 75 ohm, use the ANT-

OUT jack of the DVD/VCR to connect to the TV.This hookup provides both audio and video in a

single cable. Set your TV to channel 3 or 4 - the output channel of the DVD/VCR.This connection

allows you to use both the DVD and VCR features.

Details are on page eight.

★★★★ If your television has Component Video In jacks (which could be labelled Y Cr Cb,Y Pr Pb, or

YUV and may be green, blue, and red), use the Component Video jacks (Y Pb/Cb Pr/Cr) for the

best picture quality. Set the INTERLACE/PROGRESSIVE SCAN SELECTOR to INTERLACE. If you

use only this video connection, only the DVD picture will be available.To see DVD features on

the TV, set the TV to its Component Video In channel.

Details are on page 12.

If your TV has Progressive Scanning (480p), connect the TV to the Component Video Out jacks of

the DVD/VCR. Set the INTERLACE/PROGRESSIVE SCAN SELECTOR on the DVD/VCR to PRO-

GRESSIVE. Set your TV to Progressive Scan.

Progressive Scan provides less flickering and higher

image resolution than traditional (480i) TV signals.When PROGRESSIVE is selected, no video

will be sent from the VIDEO OUT or S-VIDEO OUT jacks.

★★★ If your TV has an S-Video In jack (which also may be labelled Y/C or S-VHS), use the S-Video jack

for excellent picture quality. If you use only this video connection, only the DVD picture will be

available.To see DVD features on the TV, set the TV to its S-Video In channel.

Details are on page

13.

★★ If your TV has a single yellow Video In jack (which also may be labelled CVBS, Composite, or

baseband), use the yellow Video jack for good picture quality.This connection provides a picture

for both the DVD Player and the VCR.To see DVD or VCR features on the TV, set the TV to its

Video In channel.

Details are on page 11.

★★★★ If you have a Stereo with a Coaxial Digital Audio In jack, this provides the clearest sound for the

DVD Player. Connect the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack to your Stereo for

the best sound quality. If you use only this audio connection, only Disc sound (no VCR) will be

available.

Details are on page 15.

★★★ If digital audio connections are not possible, connect the DVD/VCR’s red and white DVD/VCR

AUDIO OUT jacks to the Audio In jacks of your Stereo or TV.This connection provides sound

for both the DVD Player and the VCR.

Details are on pages 11-14.

Before you begin...

● Refer to the manuals of your TV, Cable Box, Stereo, or other devices as necessary. Note the style of jacks and

connectors on the other equipment. Determine how to choose different Audio and Video In channels on your

other equipment so you can see and hear the DVD/VCR material playing on the TV, Stereo, etc.

● Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after

you have finished hooking up everything. Never make or change connections with equipment connected to

the power outlet.

Remember...

● Set the TV to the correct Video In channel. Such channels may be called AUX or AUXILIARY IN,

AUDIO/VIDEO or A/V IN, EXT

1 or External In, etc.These channels often are located near channel 00. See

your TV owner’s manual for details. If you do not see the DVD or VCR playback on the TV, go to the lowest

TV channel (0

1 or 02) and change channels downward until you see the DVD or VCR picture on the TV. Or, if

your TV has only a single Antenna In jack and you are using the RF coaxial cable (as described on page eight),

set the TV to channel 3 or 4.

To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in

DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get

the TV on the correct Audio/Video In channel or channel 3 or 4.

● Set the Stereo to the correct channel or “source” mode.

● Depending on your connection, you may need to purchase additional cables or adaptors. If your TV or moni-

tor has BNC-type connectors, you will need an adaptor.

● If you switch between PROGRESSIVE and INTERLACE when the power is on, the DVD/VCR will turn off.

When you turn on the DVD Player again, the last selected scanning system will be active.

● To use the VCR features, you must include a connection with the supplied yellow video cable

and red/white audio cables or with the supplied RF coaxial cable.

Once you determine the best option, find your choice on pages 8-15. Follow the steps for the

hookup you choose.Then, go to page

17 to complete the first-time setup.

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 7

Hookups (cont’d)

75Ω

ANT /

CABLE

COAXIAL

S-VIDEO

OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

COMPONENT

VIDEO OUT

DVD

OFF

PROGRESSIVE

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

DVD/VCR VCR

ANT-IN

ANT-OUT

ANT /

CABLE

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

DVD/VCR VCR

ANT-IN

ANT-OUT

Black RF

coaxial cable

(supplied)

Antenna or

Cable TV

signal

Disconnect the antenna or Cable TV signal from your TV and con-

nect it to the ANT-IN (Antenna In) jack of your DVD/VCR.

Connect the supplied black RF coaxial cable to the ANT-OUT

(Antenna Out) jack on the back of the DVD/VCR and to the

ANTENNA IN JACK on the TV. The ANTENNA IN jack on the TV may be

labelled TV IN, RF IN, 75Ω (ohm), or ANT-IN. See your TV owner’s manual for

assistance.

Plug in the power cords of the TV and the DVD/VCR.

Set your TV to channel 3 or 4. The DVD/VCR’s output channel is 3 when

you purchase it. So, set your TV to channel 3 when the DVD/VCR is new.

If you cannot use channel 3 at your TV, you can change the DVD/VCR’s output

channel to channel 4.To do so, press the VCR button to put the DVD/VCR in

VCR mode.The green VCR light will be on the front of the DVD/VCR. Insert a

videotape and press PLAY B to start playback. During playback, press

and hold the (VCR) PLAY B button on the front of the DVD/VCR

for three to five seconds.

Each time you do this, the DVD/VCR’s output

channel switches between 3 and 4. Change your TV to channel 3 or 4 accord-

ingly. (You cannot change the DVD/VCR’s output channel while adjusting track-

ing manually. Press STOP C to stop play and cancel manual tracking, then press

PLAY

B to resume play and change the output channel.)

There is not a channel 3/4 switch on the DVD/VCR (as customary with most

VCRs).

You are ready to turn on the DVD/VCR. Go to page 17 before turn-

ing on the DVD/VCR.

Antenna In Jack

(on back of TV)

example only

DVD/VCR to TV only

Simplest connection using only the supplied black RF coaxial cable

This connection will let you use the features of both the VCR and the DVD Player.

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 8

Hookups (cont’d)

OUT

COAXIAL

S-VIDEO

OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

COMPONENT

VIDEO OUT

DVD

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

DVD/VCR VCR

ANT-IN

ANT-OUT

ANT /

CABLE

TV’s ANTENNA

IN Jack

Cable Box/Satellite Receiver

DVD/VCR

Connections

Connect a Cable TV or Satellite signal to the IN

jack on the Cable Box/Satellite Receiver.

Use an RF coaxial cable (as the one supplied) to

connect the OUT jack on the Cable Box/Satellite

Receiver to the ANT-IN (Antenna In) jack on the

DVD/VCR.

Use a second RF coaxial cable to connect the ANT-

OUT (Antenna Out) jack on the DVD/VCR to the

TV’s Antenna In jack.

Remember...

There are two ways to connect your Cable Box/Satellite Receiver

to the DVD/VCR.With the connection on this page:

● Select TV channels at the Cable Box/Satellite Receiver, not the

DVD/VCR.To record or view TV channels, follow these steps:

1) Press VCR to put the DVD/VCR in VCR mode.The green

VCR light will appear on the front of the DVD/VCR.

2) Press SKIP3/CHo or SKIP /CHp to set the DVD/VCR

to the Cable Box/Satellite Receiver output channel (03 or 04).

3) Set the TV to the DVD/VCR’s output channel (03 or 04).The

DVD/VCR’s output channel is channel 3 when the DVD/VCR is

new.To change it from 3 to 4, press and hold the (VCR) PLAY

B button on the DVD/VCR for 3-5 seconds during tape play-

back. For more details, see step 4 on page 8.

4) Select the channel you want to view/record at the Cable

Box/Satellite Receiver.

●

You may not view a channel other than the one you are recording.

●

You can only program a timer recording for one channel at a time.

Set your Cable Box/Satellite Receiver to the channel you want to

record.When you enter the channel you want to record in a

timer recording, select channel 03 or 04 (the Cable Box/Satellite

Receiver output channel). (This is step 7 on page 38.) Leave the

Cable Box/Satellite Receiver on for a timer recording.

● If you use the VCR Plus+ Programming system, set the

Cable/TV channel to 03 or 04 (Cable Box/DBS output channel)

for every VCR Plus+ channel in the VCR Plus+ Cross Reference

Map.You must set the Cable Box/DBS to the channel you want

to record; leave the Cable Box/DBS on for the timer recording.

Details are on page 40.

Cable

Signal

RF coaxial cable

DVD/VCR to Cable Bo

x or Satellite Receiver and TV

Using only basic RF coaxial cables

This connection will let you use the features of both the VCR and the DVD Player.

• If your Cable Box or Satellite

Receiver has Audio and Video Out

jacks, use audio and video cables

to connect them to the VCR

AUDIO IN and VIDEO IN jacks on

the rear of the DVD/VCR.You will

not need the RF coaxial cable con-

nection between the Cable

Box/Satellite Receiver and the

DVD/VCR as described at step 2.

Helpful Hint

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 9

Hookups (cont’d)

COAXIAL

S-VIDEO

OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

COMPONENT

VIDEO OUT

DVD

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

DVD/VCR VCR

ANT-IN

ANT-OUT

OUT

ANT /

CABLE

TV’s ANTENNA

IN Jack

Cable Box/Satellite Receiver

DVD/VCR

Connections

Connect a Cable TV or Satellite signal to the

DVD/VCR’s ANT-IN (Antenna In) jack.

Use an RF coaxial cable (as the one supplied) to con-

nect the ANT-OUT (Antenna Out) jack on the

DVD/VCR to the IN jack on the Cable Box/Satellite

Receiver.

Use a second RF coaxial cable to connect the OUT

jack on the Cable Box/Satellite Receiver to the

ANTENNA IN jack on the TV.

Remember...

There are two ways to connect your Cable Box/Satellite Receiver to

the DVD/VCR.With the connection on this page:

● Yo u may watch one channel while recording another. Follow these

steps:

1) Put the Cable Box/Satellite Receiver on the same channel as

the DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output

channel is channel 3 when the DVD/VCR is new.To alternate it

between 3 and 4, press and hold the (VCR) PLAY B button on the

front of the DVD/VCR for 3-5 seconds during tape playback.

For

details, see step 4 on page eight.

Set the TV to the Cable

Box/Satellite Receiver output channel (03 or 04).

2) Press VCR to put the DVD/VCR in VCR mode.The green VCR

light will appear on the front of the DVD/VCR.

3) Press VCR/TV on the remote to choose VCR position.

4) Press SKIP

3/CHo or SKIP /CHp to select the channel you

want to record at the DVD/VCR. Press RECORD or RECORD to

start the recording.

5) Press VCR/TV on the remote once to put the DVD/VCR in TV

position.

6) Select the channel you want to watch at the Cable

Box/Satellite Receiver.

● When you play a tape or Disc, make sure the Cable Box/Satellite

Receiver is set to the DVD/VCR’s output channel (03 or 04).

Set the TV to the Cable Box/Satellite Receiver output channel (03

or 04).

Cable

Signal

RF coaxial cable

DVD/VCR to Cable Bo

x or Satellite Receiver and TV

Using only basic RF coaxial cables

This connection will let you use the features of both the VCR and the DVD Player.

• When you play a tape, make sure

the Cable Box/Satellite Receiver is

set to the same channel as the RF

output channel of the DVD/VCR

(03 or 04). Set the TV to the

Cable Box/Satellite Receiver output

channel (03 or 04).

• If your Cable Box or Satellite

Receiver has Audio and Video Out

jacks, use audio and video cables

to connect them to the VCR

AUDIO IN and VIDEO IN jacks on

the rear of the DVD/VCR.You will

not need the RF coaxial cable con-

nection between the Cable

Box/Satellite Receiver and the

DVD/VCR as described at step 2.

Helpful Hints

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 10

Hookups (cont’d)

COAXIAL

S-VIDEO

OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

COMPONENT

VIDEO OUT

Pr/

DVD

PROGRESSIVE

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

DVD/VCR VCR

ANT-IN

ANT-OUT

Antenna or Cable TV

Signal to ANT-IN Jack

Video Cable

Audio Cables

Audio and

Video IN Jacks

on TV

Connect the antenna or Cable TV signal to the ANT-IN (Antenna In)

jack of your DVD/VCR.

Connect the red and white audio cables (supplied) to the red and

white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red

and white AUDIO IN jacks on the TV.

Match the cable colors to the jack

colors. If the TV has a single AUDIO IN jack, use the white audio cable to

connect the DVD/VCR’s white DVD/VCR AUDIO OUT (left) jack to the TV’s

AUDIO IN jack.You will not use the red cable. Or, purchase a “splitter” audio

cable to go from the left/right AUDIO OUT jacks of the DVD/VCR to the TV’s

single AUDIO IN jack.

Connect the yellow video cable (supplied) to the DVD/VCR VIDEO

OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.

The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS,

Composite, or Baseband video.

Connect the power cords of the TV and the DVD/VCR to a power

outlet.Turn on the TV and set it to the correct Audio/Video In chan-

nel.

Go to your lowest TV channel (01 or 02), then change channels down-

ward until you see VCR or DVD playback on the TV screen.

To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press

DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD

Video logo will appear on the TV screen when you get the TV on the correct

Audio/Video In channel.

Yo u are ready to turn on the DVD/VCR. Go to page 17 to complete

the first-time setup.

DVD/VCR to a TV that has

Audio and Video In jacks

Using the supplied red, white, and yellow cables

This connection will let you use the features of both the VCR and the DVD Player.

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 11

Hookups (cont’d)

DVD/VCR to a TV that has Component

Video In jacks

AUDIO IN

Cb/Pb

Cr/Pr

COMPONENT

VIDEO IN

COAXIAL

S-VIDEO

OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

COMPONENT

VIDEO OUT

Pr/

DVD

PROGRESSIVE

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

DVD/VCR VCR

ANT-IN

ANT-OUT

Connect the antenna or Cable TV signal to the ANT-IN (Antenna In)

jack of your DVD/VCR.

Connect the supplied red and white audio cables to the red and

white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red

and white AUDIO IN jacks on the TV. Match the cable colors to the jack

colors.

Connect component video cable (not supplied) to the COMPO-

NENT VIDEO OUT jacks on the DVD/VCR and to the COMPO-

NENT VIDEO IN jacks on the TV.

The Component Video In jacks on the

TV are usually red, blue, and green.

The Component Video connection only supplies video (picture) for the DVD Player of

the DVD/VCR.Therefore, in order to use the VCR features or view TV channels at the

DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT

jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable.

To connect the supplied RF coaxial cable, see step 2 on page eight.To connect the

supplied yellow video cable, see step 3 on page 11.

If your TV is compatible with progressive scanning (480p), connect the TV to the

Component Video Output jacks of the DVD player, and make sure INTERLACE/PRO-

GRESSIVE SCAN SELECTOR is set to PROGRESSIVE (P).

Connect the power cords of the DVD/VCR and TV to a power outlet.

Turn on the TV and set it to the Component Video In channel for

DVD Player features.

If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4

at the TV. If you are using the yellow video cable for VCR playback, choose the

Video In channel at your TV.

Go to your lowest TV channel and change channels down until you see VCR or

DVD playback on the TV screen, or try channel 3 or 4 at the TV.

To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press

DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD

Video logo will appear on the TV screen when you get the TV on the correct

Component Video In channel.

You are ready to turn on the DVD/VCR. Go to page 17 before turn-

ing on the DVD/VCR.

After you complete the VCR setup as described on page 17, set

DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details are

on page 72. If you play a DVD when the settings are wrong, the sound will be

distorted or you may damage the TV speakers.

Antenna or

Cable TV

Signal

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 12

Hookups (cont’d)

DVD/VCR to a TV that has an S-Video In jack

COAXIAL

S-VIDEO

OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

COMPONENT

VIDEO OUT

Pr/

DVD

PROGRESSIVE

AUDI O OUT

VIDEO OUT

AUDIO IN

VIDEO IN

DVD/VCR VCR

ANT-IN

ANT-OUT

AUDIO IN

LEFT

RIGHT

S-VIDEO IN

Connect the antenna or Cable TV signal to the ANT-IN (Antenna In)

jack of your DVD/VCR.

Connect the supplied red and white audio cables to the red and

white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red

and white AUDIO IN jacks on the TV. Match the cable colors to the jack

colors.

Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack

on the DVD/VCR and to the S-VIDEO IN jack on the TV.

The S-Video connection only supplies video (picture) for the DVD Player of the

DVD/VCR.Therefore, in order to use the VCR features or view TV channels at the

DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT

jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable.

To connect the supplied RF coaxial cable, see step 2 on page eight.To connect the

supplied yellow video cable, see step 3 on page

11.

Connect the power cords of the DVD/VCR and TV to a power outlet.

Turn on the TV and set it to the S-Video In channel for DVD Player

features.

If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4

at the TV. If you are using the yellow video cable for VCR playback, choose the

Video In channel at your TV.To find the correct Video In channel, go to your

lowest TV channel and change channels downward until you see VCR or DVD

playback on the TV screen, or try channel 3 or 4 at the TV.

To help you find the right S-Video In channel, turn on the DVD/VCR. Press DVD to

put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video

logo will appear on the TV screen when you get the TV on the S-Video In channel.

Yo u are ready to turn on the DVD/VCR. Go to page 17 before turn-

ing on the DVD/VCR.

After you complete the VCR setup as described on page 17, set

DOLBY DIGITAL to OFF in the DVD Player’s Setup menu.

Details are

on page 72. If you play a DVD when the settings are wrong, the sound will be

distorted or you may damage the TV speakers.

Antenna/Cable

TV Signal

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 13

Hookups (cont’d)

DVD/VCR to a TV and a Ster

COAXIAL

S-VIDEO

OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

COMPONENT

VIDEO OUT

Pr/

DVD

PROGRESSIVE

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

DVD/VCR VCR

ANT-IN

ANT-OUT

VIDEO IN

AUDIO (LEFT) IN

AUDIO (RIGHT) IN

Connect the antenna or Cable TV signal to the ANT-IN (Antenna In)

jack of your DVD/VCR.

Connect the supplied red and white audio cables to the red and

white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red

and white AUDIO IN jacks on the Stereo. Match the cable colors to the

jack colors.

Connect the supplied yellow video cable to the DVD/VCR VIDEO

OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.

To use Component Video cable or S-Video cable instead for the DVD Player,

see pages

12-13.You will still need the yellow video cable or RF coaxial cable

for VCR features.

Connect the power cords of the DVD/VCR,TV, and Stereo to a

power outlet.Turn on the TV and set it to the Video In channel.

Or,

simply go to your TV’s lowest channel (02 or 03) and continue changing chan-

nels downward at the TV until you see VCR or DVD playback on the TV

screen.

To help you find the right Video In channel at the TV, turn on the DVD/VCR. Press

DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD

Video logo will appear on the TV screen when you get the TV on the correct

Video In channel.

You are ready to turn on the DVD/VCR. Go to page 17 before turn-

ing on the DVD/VCR.

After you complete the VCR setup as described on page 17, set

DOLBY DIGITAL to OFF in the DVD Player’s Setup menu.

Details are

on page 72. If you play a DVD when the settings are wrong, the sound will be

distorted or you may damage the speakers.

Antenna/Cable

TV Signal

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 14

Hookups (cont’d)

DVD/VCR to a TV and to a Ster

eo that is Dolby Digital-compatible

Using Digital Audio connections

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

DVD/VCR VCR

ANT-IN

ANT-OUT

VIDEO IN

COAXIAL

DIGITAL

AUDIO IN

COAXIAL

S-VIDEO

OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

COMPONENT

VIDEO OUT

Pr/

DVD

PROGRESSIVE

Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack

of your DVD/VCR.

Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s

COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL

AUDIO IN jack on the Stereo.

This digital audio connection only provides sound for the DVD Player of the DVD/VCR. So, in

order to use the VCR features or view TV channels at the DVD/VCR, you still need to either

connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the TV’s

Antenna In jack, or connect the supplied red/white audio cables.To connect the supplied RF

coaxial cable, see step 2 on page eight.To connect the red/white audio cables, see step 2 on

page

11.

Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO

OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.

To use

component video cable or S-Video cable instead for the DVD Player, see pages

12-

13.You will still need the yellow video cable or RF coaxial cable for VCR features.

Plug in the power cords of the Stereo,TV, and DVD/VCR.Turn on the

Stereo and select its Auxiliary IN channel.Turn on the TV and set it to

the correct Video In channel.

Go to your TV’s lowest channel (01 or 02) and

change channels downward until you see DVD or VCR material on the TV screen.

To help you find the right Video In channel on the TV, turn on the DVD/VCR. Press

DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD

Video logo will appear on the TV screen when you get the TV on the correct Video

In channel.

You are ready to turn on the DVD/VCR. Go to page 17 before turning on

the DVD/VCR.

Remember...

Some DVDs are recorded in 5.1 channel Dolby Digital Surround. Select 5.1 channel Dolby

Digital Surround Sound in the DVD Disc menu. If Dolby Digital Surround is not recorded

on the Disc, you will not have surround sound available.

If you connect the DVD/VCR to a Dolby Digital Stereo, set DOLBY DIGITAL to ON in the

DVD Player’s Setup menu.

Details are on page 72. If the DVD/VCR is not connected to a

Dolby Digital-compatible Stereo, set DOLBY DIGITAL to OFF. Incorrect settings may cause

noise distortion and damage the speakers.

Back of TV

(example only)

Stereo

Antenna/Cable TV Signal

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 15

Remote Control Setup

Putting Batteries in the Remote Control

Remove the battery compartment lid on the bottom

of the remote control by pressing the tab, then lifting the

lid.

Place two AA batteries inside the battery compart-

ment with their

and

–

ends aligned as indicated.

Replace the battery compartment lid.

Using the Remote Control

● Point the remote control at the DVD/VCR’s remote sensor

(marked IR, see page 22) when using the remote to operate the

DVD/VCR. Do not point the remote at the TV.

● Do not put objects between the remote and the DVD/VCR.

Recycling Guidelines/Battery Safety

● Your new product and its packaging contain materials that can

be recycled and reused. Specialized companies can recycle your

product to increase the amount that needs to be properly dis-

posed.Your product uses batteries that should not be thrown

away when depleted but should be disposed of as small chemical

waste. Please find out about the local regulations on disposal of

your old product, batteries, and packaging whenever you replace

existing equipment.

● Battery Usage CAUTION - To prevent battery leakage that may

result in bodily injury, property damage, or damage to the unit:

Install ALL batteries correctly, with the + and - markings on the

battery aligned as indicated on the unit;

Do not mix batteries, for example, old with new or carbon with

alkaline; and

Remove batteries when the unit will not be used for a long

time.

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 16

First-time DVD/VCR Setup

Press o or p to select English, French, or Spanish as

the language for VCR on-screen displays and menus. Then,

press B.

Press B to begin channel programming. AUTO

SETUP will flash on the TV screen during the channel

search.The DVD/VCR will memorize all available channels.

When channel programming is complete, the lowest avail-

able channel will appear on the TV.

These channels will be available when you want to watch

TV while in VCR mode.To put the DVD/VCR in VCR

mode, press VCR so the green VCR light appears. Use the

SKIP3/CHo and SKIP /CHp buttons to select memo-

rized channels.To select non-memorized channels, use the

Number buttons.

• To skip this feature and play a tape

immediately, insert a tape with its

record tab removed.

• To skip step 3, press

DISC/VCR/MENU.VCR menus and

displays will be in English.

• If you try to program channels

when there is no antenna or Cable

TV signal connected to the ANT-IN

jack of the DVD/VCR, programming

will stop.AUTO SET UP will stop

flashing. Connect an antenna or

Cable TV signal to the DVD/VCR’s

ANT-IN jack and press

again.

• Repeat this process if the power

fails.

•To stop the Channel Setup while

AUTO SET UP is flashing, press

DISC/VCR/MENU.

Helpful Hints

Before turning on your DVD/VCR, make sure batteries are in the

remote control and the DVD/VCR and TV are connected correctly.

You cannot program channels if you are using a Cable Box or a

Satellite Receiver.

These menus may not appear if you have already turned

on the DVD/VCR.

Turn on the TV. Set it to channel 3 or 4 or its

AUDIO/VIDEO IN channel, depending on how you con-

nected the DVD/VCR to a TV.

Press VCR, then press STANDBY-ON. The green VCR

light will appear on the front of the DVD/VCR.The display

shown below will appear.

These menus may not appear if you have already turned on

the DVD/VCR.You may have turned on the DVD/VCR

before to find the Audio/Video In channel of the TV, for

example. If so, follow the steps on page 26 to set up chan-

nels and page 30 to select a language for the VCR menus.

Turn on the TV.

AUTO SET UP

STANDBY-ON

PLAY

VCR/TV

VCRDVD

MENU MENU

SYSTEM

RETURN TITLE

A-B

CLEAR/RESET SLOW

SUBTITLE ZOOM

ANGLE

REPEAT REPEAT

AUDIO

SEARCH MODE

DISPLAY

SKIP / CH

DISC/VCR

PAUSESTOP

VCR Plus+ RECORDTIMER SET

SPEED

1 2 3

+10

3-4

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 17

Video Cassette Playback

• Other tape playback features are

on pages 44-51.

• If AUTO REPEAT is ON, playback will

begin when you insert a tape, even

when the record tab is intact. Details

are on page 44.

• You must connect the DVD/VCR to

a TV using the RF coaxial cable or

the audio/video cables in order to

use the VCR features.These hookups

are explained on pages eight and

11.

Helpful Hints

Read and follow the steps below to play a tape.

Turn on the TV. Set it to channel 3 or 4 or its

AUDIO/VIDEO IN channel. This depends on how you

connected the DVD/VCR to a TV.

Details are on pages 7-15.

With the DVD/VCR power off, insert a tape in the

cassette compartment of the DVD/VCR. The VCR

light will appear on the front of the DVD/VCR. If the tape’s

record tab has been removed, play will start automatically.

If the DVD/VCR power is already on, press VCR to put the

DVD/VCR in VCR mode if necessary.The green VCR light

will appear on the front of the DVD/VCR.

If playback does not start automatically, press VCR,

then press PLAY B.

Press STOP C to stop playback.

Press h to rewind the tape.

After the tape stops, press STOP/EJECT A on the

front of the DVD/VCR to remove the tape.

Press STOP/EJECT A on the

DVD/VCR.

Turn on the TV.

Insert a tape in the

DVD/VCR.

STANDBY-ON

PLAY

VCR/TV

VCRDVD

MENU MENU

SYSTEM

RETURN TITLE

A-B

CLEAR/RESET SLOW

SUBTITLE ZOOM

ANGLE

REPEAT REPEAT

AUDIO

SEARCH MODE

DISPLAY

SKIP / CH

DISC/VCR

PAUSESTOP

VCR Plus+ RECORDTIMER SET

SPEED

1 2 3

+10

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 18

Disc Playback

• An “X” may appear at the top right

corner of the TV screen when you

try a feature. Either the feature is

not available on the Disc, or the

DVD/VCR cannot access the feature

at this time.This does not indicate a

problem with the DVD/VCR.

• If a Disc is dirty or scratched, the

picture may appear distorted or

playback may stop. Remove the Disc

and turn off the DVD/VCR.

Disconnect the power cord, then

reconnect it. Clean the Disc, then

turn on the DVD/VCR again and

reinsert the Disc for playback.

• When the DVD or CD light appears

on the display panel, the Disc is

loaded and ready for playback.

• When you press OPEN/CLOSE

PLAY (DVD) on the front of the

DVD/VCR when the power is off, the

DVD/VCR will turn on in DVD mode.

Otherwise, the DVD/VCR will turn on

in the mode in which it was turned

off.

Helpful Hints

Before you begin, turn on the TV, Stereo, and other equipment

connected to the DVD/VCR. Make sure the TV and the Stereo (if

applicable) are set to the correct channel.

Details are on pages 7-15.

Press STANDBY-ON to turn on the DVD/VCR.

Press DVD so the red DVD light appears on the

front of the DVD/VCR.

Press OPEN/CLOSE A (to the right of the disc tray on

the front of the DVD/VCR) to open the Disc tray.

Place a Disc into the tray. If the DVD is recorded on

only one side, place the Disc in the tray with the label fac-

ing up and the shiny side facing down. Some DVDs are

recorded on both sides. Make sure the label of the side you

want to play is facing up.

Press PLAY B. The tray will close and play will begin at

the first Chapter or Track. If a DVD menu appears instead,

see page 52. With some Audio CDs, playback will not begin

unless you press PLAY B.

Or, press OPEN/CLOSE A or press the tray toward the

DVD/VCR to close the tray.

With MP3 and JPEG files, playback will begin from the

beginning of the disc.

Press STOP C to stop playback.

Insert a Disc.

Remember, this DVD/VCR

will play only certain Discs.

See page six for details.

Press OPEN/CLOSE A

on the DVD/VCR.

STANDBY-ON

PLAY

VCR/TV

VCRDVD

MENU MENU

SYSTEM

RETURN TITLE

A-B

CLEAR/RESET SLOW

SUBTITLE ZOOM

ANGLE

REPEAT REPEAT

AUDIO

SEARCH MODE

DISPLAY

SKIP / CH

DISC/VCR

PAUSESTOP

VCR Plus+ RECORDTIMER SET

SPEED

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 19

Display Panel (DVD)

Display

Messages about current Disc

operations appear here.

See Display Messages below.

DVD Light (red)

This light appears when the DVD/VCR is in

DVD mode.You can only watch DVDs when

the red DVD light is on.To make the red DVD

light come on, press SOURCE on the front of

the DVD/VCR or DVD on the remote.

Appears after the disc tray closes if the tray is empty, if

there is an error reading the disc, or if an unacceptable

disc is installed.

Tray is opening or is open.

Tray is closing.

Disc is loading.

Display Messages

REPEAT:Appears

during Repeat

Playback of a Disc,

along with A-B,

TITLE, CHP., or

TRK., depending on

the type of Repeat

Playback you have

selected. Details are

on page 57.

A-B:Appears during A-

B Repeat Playback.

Details are on page 57.

B:Appears during

Disc playback.

F:Appears

when play is

paused.

DVD: Lights when a

DVD is in the tray and

ready for playback.

CD: Lights when a

CD is in the tray and

ready for playback.

Displays the elapsed playing time of the

current Title or Track. Briefly displays

Title, Chapter, or Track numbers.

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 20

La page charge ...

Philips DVD VCR Combo DVD750VR Manuel utilisateur

Marque: Philips

Modèle: DVD VCR Combo DVD750VR

Catégorie: Lecteurs de cassettes

Taper: Manuel utilisateur

Ce manuel convient également à

DVD750VR

Télécharger le PDF

rapport

dans d''autres langues

English: Philips DVD VCR Combo DVD750VR User manual

Philips DVD VCR Combo DVD750VR Manuel utilisateur

Ce manuel convient également à

Philips DVD VCR Combo DVD750VR Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents