Denon DHT-487DV Manuel utilisateur

Catégorie
Lecteurs DVD
Taper
Manuel utilisateur
DVD-557
DVD VIDEO PLAYER
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 1
2
EN
WARNING
: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION
:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1)
Read Instructions - All the safety and operating instruc-
tions should be read before the product is operated.
2) Retain Instructions - The safety and operating instruc-
tions should be retained for future reference.
3) Heed Warnings - All warnings on the product and in
the operating instructions should be adhered to.
4) Follow Instructions - All operating and use instruc-
tions should be followed.
5) Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not recom-
mended
by the product manufacturer as they may cause
hazards.
7) Water and Moisture - Do not use this product near
water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.
8) Accessories - Do not place this product on an unsta-
ble cart, stand, tripod, bracket, or table. The product
may fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer’s
instructions, and should use a mounting accessory
recommended by the manufacturer.
9) A product and cart combination
should be moved with care. Quick
stops, excessive force, and
uneven surfaces may cause the
product and cart combination to
overturn.
10)
Ventilation - Slots and openings in
the cabinet are provided for venti-
lation and to ensure reliable opera-
tion of the product and to protect it
from overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufactur-
er's instructions have been adhered to.
11)
Power Sources - This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your product dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
12)
Grounding or Polarization - This product may be equipped
with a polarized alternating-current line plug (a plug hav-
ing one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
13)
Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the product.
14) Lightning - For added protection for this product dur-
ing a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet. This will prevent damage to the product
due to lightning and power-line surges.
15) Power lines - An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be
taken to keep from touching such power lines or cir-
cuits as contact with them might be fatal.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liq-
uid of any kind on the product.
18) Servicing - Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into
the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by follow-
ing the operating instructions. Adjust only those
controls that are covered by the operating instruc-
tions as an improper adjustment of other controls
may result in damage and will often require exten-
sive work by a qualified technician to restore the
product to its normal operation.
e)
If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in per-
formance - this indicates a need for service.
20)
Replacement Parts - When replacement parts are
required, be sure the service technician has used replace-
ment parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitu-
tions may result in fire, electric shock, or other hazards.
21) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product
is in proper operating condition.
22)
Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
PORTABLE CART WARNING
(Symbol provided by RETAC)
S3125A
IMPORTANT SAFEGUARDS
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 2
3
EN
English
PRECAUTIONS
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible
eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECI-
FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO
BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
Laser Safety
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Non-use periods - Turn off the unit when it is not in use. Unplug the unit from the household AC outlet if it is
not to be used for a long time. Unplug the unit during lightning storms.
Please read this operating instructions carefully before using your DVD player, and keep it for future reference.
Important
The main power supply is engaged when the main plug is
plugged in a 120V, 60Hz AC outlet. To operate the unit, press
the ON/STANDBY button to turn on the unit.
Power Supply
Use only discs marked with logos listed on page 6.
To avoid fire or electric shock, do not expose this unit to rain
or moisture.
WARNING:
LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
Warning
Installation Location
For safety and optimum performance of this unit:
Do not stand the unit up vertically. Install the unit in a hori-
zontal and stable position. Do not place anything directly on
top of the unit. Do not place the unit directly on top of the TV.
Shield it from direct sunlight and keep it away from sources
of intense heat. Avoid dusty or humid places. Avoid places
with insufficient ventilation for proper heat dissipation. Do not
block the ventilation holes on the sides of the unit. Avoid
locations subject to strong vibration or strong magnetic fields.
• Be sure to remove a disc and unplug the AC power cord
from the outlet before carrying the unit.
Cautions on Installation
Noise or disturbance of the picture may be generated if this
unit or any other electronic equipment using microproces-
sors is used near a tuner or TV.
If this happens, take the following steps:
• Install this unit as far as possible from the tuner or TV.
• Set the antenna wires from the tuner or TV away from this
unit’s power cord and input/output connection cords.
Noise or disturbance tends to occur particularly when using
indoor antennas or 300/ohms feeder wires. We recommend
using outdoor antennas and 75/ohms coaxial cables.
NOTE:
• For heat dispersal, do not install this equipment in a con-
fined space such as a book case or similar unit.
Wall
10cm or more
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 3
4
EN
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . 2
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Cautions on Installation . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dew Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Avoid the Hazards of Electrical Shock and Fire . . . . . . . 4
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice for the Progressive Scan Outputs . . . . . . . . . . . . 5
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Displays During Operation . . . . . . . . . . . . . . . . . . . . . . 10
HDMI Mode and Actual Output Signals . . . . . . . . . . . . 10
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 10
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Description - Rear Panel . . . . . . . . . . . . . . . . . . . . . . . 11
Connection to an Audio System . . . . . . . . . . . . . . . . . . 12
Connection to a TV (for video) . . . . . . . . . . . . . . . . . . . 13
Connection to a TV with an HDMI compatible port . . . . 14
DISC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
HDMI Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Brightness of the Front Panel Display. . . . . . . . . . . . . . 15
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CALLING UP A MENU SCREEN DURING
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Still / Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 16
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 16
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . 16
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 16
By using the SEARCH MODE button . . . . . . . . . . . . 16
By using the SKIP buttons HG . . . . . . . . . . . . 16
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
By using the SEARCH MODE button . . . . . . . . . . . . 17
By using the SKIP buttons HG . . . . . . . . . . . . 17
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 17
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . 17
REPEAT TRACK / GROUP / ALL . . . . . . . . . . . . . . . 17
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . . 18
Changing the On-Screen Display . . . . . . . . . . . . . . . . . 20
Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Dialog Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Picture Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Audio Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Ratings Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
RATING LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . 24
CONTROL LEVELS . . . . . . . . . . . . . . . . . . . . . . . . . 24
Others Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Reset to the Default settings
(except for Ratings Control) . . . . . . . . . . . . . . . . . . . . 25
Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . 25
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . 26
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
PRECAUTIONS
Caution
1) Do not attempt to open the cabinet. There are no parts
you can service inside. Refer all servicing to qualified ser-
vice personnel.
2)
Slot and openings in the cabinet and at the side or bottom
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating these opening
must not be blocked or covered. Avoid enclosed spaces
such as book cases unless proper ventilation is provided.
3) Keep the unit away from the radiator heat sources.
4) Avoid using near strong magnetic fields.
5) Do not push objects of any kind into this through the cabi-
net slot as they could touch current carrying parts or
short circuit parts resulting in a fire or electric shock.
6) Never spill liquid of any kind on this unit.
If liquid is spilled into the unit, consult qualified service
engineer.
7) Use this unit in a horizontal (flat) position only.
8) This equipment is in Stand-by mode when it turns off
whilst the power cord is connected.
9) Keep the set free from moisture, water and dust.
10) Handle the power cord carefully. Hold the plug when
unplugging the code.
11) All the safety cautions and operating instructions should
be read before the DVD player is operated.
12) Use caution not to pinch your finger in the disc slot.
13) Do not put heavy objects on the AC power cord.
14) Keep the AC power cord away from heat appliances.
15) Be sure to remove a disc and unplug the AC power cord
from the outlet before carrying the DVD player.
16) Do not put any pressure to the DVD player when carrying.
17) Do not use the DVD player outdoors.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from
AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the
power cord immediately and take the unit to our Authorized
Service Center for servicing.
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating a
cold room or under conditions of high humidity. Do not use the
DVD Player at least for 2 hours until its inside is dry.
Dew Warning
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 4
5
EN
English
The serial number of this product may be found on the back of the DVD player. No others have the same serial
number as yours. You should record the number and other vital information here and retain this book as a per-
manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectu-
al property rights. Use of this copyright protection technology must be authorized by Macrovision, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
INTRODUCTION
Supplied Accessories
About Copyright
Symbols Used in this Manual
The following symbols appear below in some headings and notes in this manual, with the following meanings.
:Description refers to playback of DVD-Video discs. (including DVD-R/RW discs)
:Description refers to playback of Audio CDs.
:Description refers to playback of discs formatted with MP3.
:Description refers to viewing of JPEG discs.
:Description refers to playback of discs formatted with WMA.
WMA
JPEG
MP3
CD
DVD
RC-1018
“AA” (R6P)
batteries
• • • •
2
Operating
Instructions
• •
1
Service Station
List
• • • • • • • • •
1
Warranty
Card
• • • • • • • •
1
Audio
cable
• • • • • • •
1
Video
cable
• • • • • • • •
1
Remote
control
• • • • • •
1
Please check to make sure the following items are included with the main unit in the carton.
U. S. Patent Nos, 4,631,603, 4,819,098, 4,907,093, 5,315,448 and 6,516,132.
Notice for the Progressive Scan Outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is
recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p DVD player, please contact our customer service center.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 5
6
EN
ABOUT THE DISCS
Playable Discs
DVD-Video
* 1, 2, 3, 5
* 1, 3, 4, 5,
6, 7, 8
* 3, 5
* 3, 4, 5, 7, 8
* 3, 4, 5, 7, 8
or
DVD-R
DVD-RW
Audio CD
CD-R
CD-RW
Digital video
(MPEG2)
-
-
-
Region code
Mark (logo)
Playable
discs
Recorded
signals
Disc size
Disc types
12 cm
or
8 cm
Example
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 1
Chapter 2
Chapter 3 Chapter 4
12 cm
or
8 cm
Digital audio
Digital audio
MP3
WMA
*
9
Digital picture
(JPEG)
Example
Group 1 Group 2
Tr ack 1
Tr ack 2 Track 5
Tr ack 6
Tr ack 3
Tr ack 4
Example
Tr ack 1
Tr ack 2
Tr ack 5
Tr ack 6
Tr ack 3 Track 4
Audio CD
Picture CD
12 cmJPEG
MP3,
JPEG,
WMA
is a trademark of DVD Format/Logo Licensing Corporation.
is trademark of Eastman Kodak Company.
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This player conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2:
Certain DVD discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*6: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may be distorted, etc.).
*7: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may not
play back properly.
*8:
Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*9: This player cannot play the disc contents protected by Windows Media Digital Rights Management (DRM).
¡ NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL /
DVD-ROM for personal computers / CD-ROM for personal computers
¡ On the following disc, the sound MAY NOT be heard.
Super Audio CD / DVD-Audio
NOTES:
• Only the sound recorded on the normal CD layer can be delivered. (Super Audio CD)
The sound recorded on the high density Super Audio CD layer cannot be delivered. (Super Audio CD)
• Disc with the Video zone can be played. (DVD-Audio)
• Disc only of the Audio zone cannot be played. (DVD-Audio)
¡ Any other discs without compatibility indications
CAUTION:
• Use caution not to pinch your finger in the disc slot.
• Be sure to remove a disc and unplug the AC power cord from the outlet before carrying the DVD player.
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 6
7
EN
English
FEATURES
¡Progressive Scan system
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in
higher resolution than that of traditional (525i/480i)
television signals.
¡Dolby Digital Sound
By hooking up this player to a Multi-Channel Dolby
Digital decoder, you can enjoy high-quality Dolby
Digital Multi-channels surround sound as heard in the
movie theaters.
¡DTS (Digital Theater System)
When this player is connected to the DTS decoder, you
can enjoy Multi-channel surround system which repro-
duces the original sound as truthfully as possible. Multi-
channel surround system is developed by the Digital
Theater Systems, Inc.
¡HDMI (High Definition Multimedia Interface)
You can enjoy clearer video output when connecting
this player to a display equipment with an HDMI-com-
patible port.
¡Dialog Speed
Playback in slightly faster or slower speed while keep-
ing the sound quality as in the normal playback.
Dialog speed is available only on discs recorded in the
Dolby Digital format.
¡Still/Fast/Slow/Step playback
Various playback modes are available including still
pictures, fast forward/reverse, slow motion and step
frames.
¡Still Mode
The resolution of pictures while in the still (pause)
mode can be adjusted.
¡Random Playback for Audio CD, MP3, JPEG and
WMA
This player can shuffle the playback order of tracks in
random order.
¡Program Playback for Audio CD, MP3, JPEG and
WMA
You can program the playback order of tracks in a
desired order.
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Auto Power Off
The power turns off automatically if there is no activity
at the player or its remote for more than 30 minutes
(refer to page 25).
¡Subtitles in a desired language
You can select a desired language for subtitles if that
language is available on a disc.
¡Selecting a camera angle
You can select a desired camera angle if a disc con-
tains sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select a desired audio language and sound
mode if different languages and modes are available
on a disc.
¡Ratings Control
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs
This player automatically detects if a loaded disc is
DVD-Video, Audio CD, MP3, JPEG or WMA.
¡Playing back an MP3 disc
You can enjoy MP3 files which are recorded on CD-
R/RW.
¡Direct Search
You can search the desired title, chapter, and track with
numeric button during playback or in stop mode.
¡On-screen display
Information about the current operation can be dis-
played on a TV screen, allowing you to confirm the cur-
rently active functions (such as program playback)
using the remote control.
¡Dimmer
The brightness of the display can be adjusted.
¡Screen Saver
The screen saver program starts if there is no activity
at the player or its remote for more than 5 minutes. The
brightness of the display is darken by 75%. The pro-
gram is inactivated when there is any activity.
¡Picture Control
Picture Control adjusts Brightness, Contrast, Color,
Gamma Correction and Sharpness of the specific dis-
play.
¡Search
Chapter search: Search for a desired chapter.
Title search: Search for a desired title.
Track search: Search for a desired track.
Time search: Search for a desired time point or a
title or a track.
¡Repeat
Chapter: Repeated playback of a chapter of the
disc.
Title: Repeated playback of a title of the
disc.
Track: Repeated playback of a track of the
disc.
All: Repeated playback of the entire disc.
(exclude DVD)
A-B: Repeated playback of a part between
two points.
Group: Repeated playback of a folder of the
MP3/JPEG/WMA disc being played is
possible.
¡Zoom
2-time or 4-time magnified screen can be displayed.
¡Marker
Electric reference points designated by user can be
called back.
¡Resume Playback
User can resume playback from the point at which the
playback has been stopped even if the power is turned
off.
¡Component Video Out Jacks
Jacks located on the back of the DVD Player which are
used to send high-quality video to a TV via Component
Video In Jacks.
¡Bit rate indication
¡DRC (Dynamic Range Control)
You can control the range of sound volume.
¡Displaying a JPEG picture
Kodak Picture CDs can be played back. Still images
stored in JPEG format on CD-R/RW can also be
played back.
¡Reproducing WMA data
You can enjoy WMA files which are recorded on CD-
R/RW.
“WMA” (Windows Media Audio) is an audio
codec developed by Microsoft
®
in the United
States of America.
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 7
8
EN
FUNCTIONAL OVERVIEW
FRONT PANEL
REMOTE CONTROL
The buttons with circled numbers can only be
operated with the remote control.
1
3
4
5
6/24
7/25
12
13
11
10
9
8
2
RC-1018
14
9
15
16
18
19
20
21
23
5
1
32
3
29
30
28
27
26
25
11
7
4
31
17
6
22
24
1. ON/STANDBY (POWER ON/OFF) Buttons [page 15]
2. Disc loading tray
3. OPEN/CLOSE Button [page 15]
4. PLAY Button [page 15]
5. STOP Button [page 15]
6. H (SKIP) Button [page 16]
7. G (SKIP) Button [page 16]
8. DIMMER Button [page 15]
9. REPEAT Button [page 17]
10. HDMI Button [page 15]
Press to set the HDMI connector’s video signal output
mode.
11. STILL/PAUSE Button [page 15]
12. Display, Remote Sensor Window
13. HDMI indicator [page 15]
Lights up when there is video signal output from the
HDMI OUT jack.
14. A-B REPEAT Button [page 18]
15. RANDOM Button [page 18]
16. ZOOM Button [page 16]
17. CLEAR Button [page 17]
18. ANGLE Button [page 22]
19. MENU Button [page 15]
20. ENTER Button [page 15]
21. Cursor Buttons [page 15]
22. RETURN Button [page 17]
23. SEARCH MODE Button [page 16]
24. h (Fast Reverse SEARCH) Button [page 16]
Press more than 2 seconds when you use the front
panel button for this function.
25. g (Fast Forward SEARCH) Button [page 16]
Press more than 2 seconds when you use the front
panel button for this function.
26. SETUP Button [page 23]
27. SUBTITLE Button [page 21]
28. TOP MENU Button [page 15]
29. DISPLAY Button [page 20]
30. AUDIO Button [page 21]
31. Numeric Buttons [page 15]
32. MODE Button [page 18]
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 8
9
EN
English
Buttons on remote control work in different ways for DVD, Audio CD, MP3, JPEG and WMA:
Refer to the following table for correct use.
Tour of the Remote Control
FUNCTIONAL OVERVIEW
POWER Buttons
A-B REPEAT Button
REPEAT Button
MODE Button
SUBTITLE Button
DVD
To switch the power between on and standby.
To switch the power between on and standby.
To mark a segment between A and B for repeated
playback.
To mark a segment between A and B for repeated
playback. (CD)
To repeat playback of a title or chapter.
To repeat playback of a track or disc. (CD)
To repeat playback of a track, group or
disc. (MP3, JPEG, WMA)
RANDOM Button
To play back tracks in random order.
ZOOM Button
To program a specific playback order.
To activate the 3D sound (Virtual surround system).
(CD, MP3, WMA)
To magnify part of the picture (x2/x4).
ANGLE Button
To access various camera angles on the disc.
To access various subtitles on the disc.
AUDIO Button
DISPLAY Button
To access various audio functions on the disc.
To select STEREO, L-ch or R-ch. (CD)
To display the current disc or HDMI mode.
To display the current disc or HDMI mode.
To search for a chapter, title, time or marker.
To return to a location on the disc rapidly.
OPEN/CLOSE Button
To search for a track.
To search for time or a marker. (CD)
To return to a location on the disc rapidly.
SEARCH MODE Button
Numeric Buttons
CLEAR Button
To open or close the disc tray.
To open or close the disc tray.
To select a chapter or title directly.
To select a track directly.
To clear the markers.
To clear the numbers entered incorrectly.
To cancel the A point for A-B Repeat.
To clear the markers. (CD)
To clear the numbers entered incorrectly.
To cancel the A point for A-B Repeat. (CD)
CD/MP3/JPEG/WMA
To magnify part of the picture (x2). (JPEG)
To rotate a picture. (JPEG)
MENU Button
TOP MENU Button
ENTER, Cursor Buttons
RETURN Button
SEARCH Buttons
To call up the menu on a disc.
To call up the top menu on a disc.
To move the cursor and determine its position.
SETUP Button
To return to the previous operation in the setup
menu.
To return to the previous operation in the setup
menu.
To call up the setup menu. To call up the setup menu.
SKIP Buttons
To skip chapters/titles.
To begin fast forward/reverse search or slow forward/
slow reverse.
STOP Button
PLAY Button
To stop playback.
To begin playback.
To stop playback.
To begin playback.
STILL/PAUSE Button
To move the cursor and determine its position.
To skip tracks.
To pause playback.
To advance playback frame by frame.
To pause playback.
To call up the FILE LIST. (MP3, JPEG, WMA)
To return to the first item in the highest hierarchy
of the FILE LIST. (MP3, JPEG, WMA)
To begin fast forward/reverse search.
(CD, MP3, WMA)
To set Picture Control.
To set Black Level on/off.
To activate the 3D sound (Virtual surround system).
To set Dialog Speed.
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 9
10
EN
Loading the Batteries
Front Panel Display
Displays During Operation
FUNCTIONAL OVERVIEW
1. Open the battery compartment cover.
2. Insert two “AA” (R6P) batteries, with each
one oriented correctly.
3. Close the cover.
The present display state is shown.
TL./GR.: Title
TR./CP.: Track or Chapter
To change to the display of a title please push
the DISPLAY button in the state of Resume.
Lights up when the inserted disc is being play back.
Displays the chapter (title) or track
number. In case the chapter (title) or
track number is over 100, displays
“_ _”.
Displays the elapsed time of the chapter (title) or track.
(The display of 10 hours or more cannot be performed.)
Selected HDMI output mode is displayed.
Lights up when playing back in slow mode. (DVD)
Lights up when the disc playback comes to a pause.
Lights up when the progressive scan system is activated. Displays a type of the disc which is on the tray.
DVD: DVD
CD: Audio CD, MP3, JPEG, WMA
Lights up when you have selected the
audio file such as CD and MP3, WMA
on the program screen.
Lights up when the repeat function is on.
Lights up when the ALL repeat function is on.
Lights up when the A-B repeat function is on.
Power on
No disc inserted or
cannot read
HDMI output mode
(480p) is selected
Tray open
Tray closed
Loading the Disc
Power off
HDMI output mode
(720p) is selected
HDMI output mode
(1080i) is selected
HDMI output mode
(OFF) is selected
Program playback is
set
Program playback setting
group (folder) is selected
Program playback setting
ALL CLEAR is selected
Random playback is
set
Cautions On Batteries
Use “AA” (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximate-
ly once a year, though this depends on the fre-
quency with which the remote control unit is used.
If the remote control unit does not operate within a
close proximity of the main unit, replace the batteries
with new ones, even if less than a year has passed.
The included batteries serve only for verifying operation.
Replace them with new batteries as soon as possible.
When inserting the batteries, be careful to do so in
the proper direction, following the and marks
in the remote control unit’s battery compartment.
To prevent damage or battery fluid leakage:
• Do not mix a new battery with an old one.
• Do not mix two different types of batteries such
as alkaline and manganese.
• Do not short-circuit, disassemble, heat or dis-
pose of batteries in flames.
• Remove the batteries when not planning to use
the remote control unit for a long period of time.
If the batteries should leak, carefully wipe off the fluid from the
inside of the battery compartment, then insert new batteries.
HDMI Mode and Actual Output Signals
OFF
OFF
480p 1080i
1080i
1080i1080i
480p
480p 720p
720p
720p720p
480p
720p
1080i
480p
1080i
480p
720p
480p
480p
480p 480p 480p
OFF
OFF
OFF
HDMI mode of this unit
Supported
HDMI format of
Display device
NOTES:
The front panel display has blinked while setting the
program playback.
• “P**-●●●is displayed in the front panel display while
setting the program playback. (“**” is program number,
●●●”is track number.)
“A” is displayed in front panel display while selecting the
audio file (CD, MP3, WMA).
“F-***” is displayed in the front panel display while selecting
the group (folder). (“***” is group (folder) number.)
“A-CLEAr” is displayed in the front panel display while
selecting ALL CLEAR.
“SHUFFLE” is displayed in the front panel display while
setting the random playback.
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 10
11
EN
English
CONNECTIONS
1. DIGITAL OUT Jacks (OPTICAL/COAXIAL)
Use either an optical or coaxial digital cable (commercially available) to connect to an AV amplifier with a built-in
decoder (AV control center).
2. AUDIO OUT Jacks
Use an audio cable to connect to the Audio input jacks of A/V-compatible TV, wide screen TV or Stereo system.
3. HDMI OUT Jack
Use a HDMI connection cable (commercially available) to connect to a display with an HDMI compatible port.
4. VIDEO OUT Jack
Use a video cable to connect one of the jacks to Video input on your A/V-compatible TV, wide screen TV or Stereo sys-
tem.
5. COMPONENT VIDEO OUT Jacks
Use a component video cable (commercially available) to connect these jacks if you have a TV with Component Video in
jacks. These jacks provide C
R
/P
R,
C
B
/P
B
and Y video. Along with S-Video, Component Video provides the best picture
quality.
6. S-VIDEO OUT Jack
Use an S-Video cable (commercially available) to connect this jack to the S-Video jack on your A/V-compatible TV or
wide screen TV for a higher quality picture.
NOTE:
When there is video output from the HDMI OUT jack, no signal is output from the COMPONENT VIDEO OUT jacks.
Selecting Progressive Scan (525p/480p or Interlaced 525i/480i) Playback
¡If your TV is compatible with progressive scanning (525p/480p), connect the TV to the COMPONENT VIDEO OUT jacks of
the DVD player and set PROGRESSIVE to ON in the Display setting. Next, set your TV to the progressive scan mode.
Refer to page 23 for instructions on changing the Display setting. P.SCAN will appear on the Display of the unit.
¡If your TV is not compatible with progressive scanning, set PROGRESSIVE to OFF (refer to page 23). Make sure that P.SCAN
on the display of the unit lights off.
¡Use a commercially available adaptor if the video input jacks of your TV or monitor is the BNC type.
¡The unit is sending Progressive video signal and HDMI signal simultaneously when HDMI mode is set to ON. If you con-
nected component video cable to your TV, which is not compatible with progressive scan, the distorted picture will be out-
put.
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional (525i/480i) television signals.
Description - Rear Panel
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
1 32 4 5 6
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 11
12
EN
Connection to an Audio System
Stereo system
NOTES (for Method 2 only):
When using an AV amplifier with a built in decoder (AV control center), Dolby Digital, or DTS decoder as shown in the
Method 2, set “DOLBY DIGITAL” or “DTS” to “BITSTREAM” accordingly for audio output in the setup mode (refer to page
24). Set it to “PCM” or “OFF” for the decoder that is not used currently. Playing back a DVD using incorrect settings may
generate noise distortion, and may also damage the speakers.
The audio source on a disc in a Dolby Digital
Multi-channel
surround format cannot be recorded as digital sound by an MD
deck or DAT deck.
Set “DOLBY DIGITAL” to “PCM” and “DTS” to “OFF” for audio output in the setup mode for connecting to an MD deck or DAT
deck (
refer to page 24)
.
Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
When playing a copyright-protected 96kHz PCM DVD, the digital sound will be down sampled at 48kHz, even if you set “LPCM
SELECT” to “OFF” (refer to page 24).
AUDIO
DVD
Audio Input Jacks
Digital Audio Input
Jacks
AUDIO OUT
(analog)
DIGITAL OUT
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + AV amplifier with a built in decoder (AV control center), Dolby Digital decoder, DTS decoder,
MD deck or DAT deck
Method 1 Method 2
CONNECTIONS
The following shows examples of connections commonly used to connect the DVD player to TV and other
components.
If using this DVD player to play back a DVD in a Dolby Digital Multi-channel surround or DTS surround format, the
DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
By hooking up the player to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic ambience
with powerful and high-quality surrounding sound of a professional standard which can be heard in movie theaters.
Use a commercially available audio optical or coaxial digital cable (not included) for the audio connections.
NOTES:
Be sure to turn off the power of all components in the system before connecting another component.
Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
Optical cable (commercially available)
• Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with
a diameter of 6 inches (15cm) or more when storing them.
• Use a cable which is 9.8 feet (3m) or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
AV amplifier with a built in decoder
(AV control center),
Dolby Digital decoder,
DTS decoder,
MD deck or DAT deck
Optical cable
(commercially
available)
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 12
13
EN
English
NOTES:
Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting it to this unit’s S-Video output connector
using a commercially available S-Video connection cord.
Component output connector
Picture could be distorted if you connect DVD player with both Component output connector and HDMI output connector at
the same time.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not includ-
ed. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna termi-
nal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE:
The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
CONNECTIONS
Connection to a TV (for video)
DVD
S-VIDEO IN
VIDEO IN
LR
CB/PBYCR/PR
COMPONENT
VIDEO IN
TV
Good
picture
Basic
audio
Better
picture
Best
picture
Method 1 Method 2 Method 3
AUDIO OUT
(analog)
VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT
Video
Cable
(supplied)
S-Video
Cable
(commercially
available)
Component
Video
Cable
(commercially
available)
Audio
Cable
(supplied)
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Jacks
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 13
14
EN
Connection to a TV with an HDMI Compatible Port
CONNECTIONS
A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (High-
Definition Multimedia Interface) connector allows digital transfer of the digital images of DVD-Video and other
sources.
To HDMI Input
Connector
A display equipment with an HDMI compatible port
HDMI cable
(commercially available)
NOTES:
When using an HDMI-incompatible or HDCP-incompatible display equipment, the image will not be viewed properly.
Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this play-
er cannot be controlled by another device vice the HDMI connector.
The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may
be limited by the equipment that is connected.
Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with
equipment such as this, audio signals are not output from the HDMI output connector.
When the set’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI convert-
er cable (commercially available), the signals are output in digital RGB.
*HDMI: High-Definition Multimedia Interface
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display
equipment (or an AV amplifier) support a copyright protection system called HDCP (High-bandwidth Digital Content
Protection System). HDCP is copy protection technology that comprises data encryption and authentication of the connect-
ed AV equipment.
This player supports HDCP. Please read the operating instructions of your display equipment (or AV amplifier) for more
information.
DOLBY DIGITAL/DTS Setting
Audio Recording Format
BITSTREAM *1 PCM or OFF
Dolby Digital Dolby Digital
2channel PCM
DTS DTS DVD-Video
LPCM 2channel PCM 2channel PCM
Audio CD 2channel PCM 2channel PCM
MP3/WMA 2channel PCM 2channel PCM
*1 If the connected equipment is not compatible with HDMI BITSTREAM, signals are output on PCM.
C Actual output modes by media
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 14
15
EN
English
During playback, press the
STILL/PAUSE button.
Playback will pause and sound
will be muted.
To continue playback, press the PLAY button.
NOTE:
On DVDs, set “STILL MODE” to “FIELD” on the display
menu if pictures in the pause mode are blurred (refer to
page 23).
2
1
WMAJPEGMP3CDDVD
Still / Pause
F
Getting started
•Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD player.
Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
Press the POWER ON button.
“P-ON” will appear briefly on the display panel.
Press the OPEN/CLOSE button
to open disc loading tray.
Place the disc in the tray, with the
label facing up.
Press the PLAY button.
•The tray will close automatically,
then playback will start from the first
chapter or track of the disc. If the playback does not
start automatically, press the PLAY button.
•When you play back the DVD with a title menu, it may
appear on the screen. In this case, refer to “Title Menu”.
Press the STOP button to stop playback.
NOTES:
•A “prohibited icon” may appear at the
top-right corner on the TV screen during
operation, warning that a prohibited
operation has been encountered by the
DVD player or the disc.
•With DVDs that use some titles for playback program
signals, playback may start from the second title, or it
may skip these titles.
During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
The operation may vary when you play back DVDs with disc
menu. Refer to the manual accompanying the disc for details.
5
4
3
2
1
WMAJPEGMP3CDDVD
Press the MENU button.
The DVD main menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press the Cursor buttons (K / L / s / B) to select an
item, and the ENTER button to confirm the selection.
4
3
2
1
DVD
DISC PLAYBACK
Basic Playback
Disc Menus
DVD may contain menus to navigate the disc and access spe-
cial features. Press the appropriate Numeric buttons or use the
Cursor buttons (K / L / s / B) to highlight your selection in the
DVD main menu and press the ENTER button to confirm.
NOTE:
Unless otherwise stated, all operations described in this
manual are based on remote control use. Some operations
can be carried out using the menu bar on the TV screen.
DVD
General Features
Press the TOP MENU button.
The title menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
Press the Cursor buttons (K / L / s / B) to select an
item, and the ENTER button to confirm the selection.
Playback will begin at the selected title.
3
2
1
DVD
Title Menu
Press the MENU button to call up the DVD main menu.
Press the TOP MENU button to call up the title menu.
NOTE:
Contents of menus and corresponding menu opera-
tions may vary among discs. Refer to the manual
accompanying the disc for details.
DVD
CALLING UP A MENU SCREEN DURING PLAYBACK
Press the DIMMER button on the front panel to
select the desired brightness of the front panel dis-
play. (BRIGHT, DIMMER or OFF)
The default setting is BRIGHT.
NOTES:
•The brightness of the front panel display can be adjust-
ed from the setup menu. Details are on page 25.
When you turn on the power next time, the brightness
of the front panel display will be as set in setup menu.
1
Brightness of the Front Panel Display
HDMI Setup
Press the HDMI button on the front panel to select
the HDMI output mode.
The output mode changes as follows every time
the HDMI button is pressed.
The HDMI indicator on the front panel lights up when
HDMI output mode is on.
480P (Default):
Video output from the HDMI OUT jack at 480p.
720P : Video output from the HDMI OUT jack at 720p.
1080 : Video output from the HDMI OUT jack at 1080i.
OFF : No video output from the HDMI OUT connector.
NOTES:
Video and audio signals may distorted temporarily
when switching to/from the HDMI output mode.
Use a display equipment with an HDMI-compatible port.
The unit is sending Progressive video signal and HDMI
signal simultaneously when HDMI mode is set to ON. If
you connected component video cable to your TV, which
is not compatible with progressive scan, the distorted pic-
ture will be output.
The HDMI indicator on the front panel flashes when you
select the HDMI output mode but there is no HDMI cable.
•You can check the HDMI connection status by pressing
the DISPLAY button during playback with the HDMI
output mode (refer to page 20).
If the TV is not compatible with newly selected HDMI
output mode, the actual output mode will be kept the
one before changing the selection. When this occurs,
the newly selected mode will appear on the front panel
display (see page 10) while the actual output resolution
will be indicated by performing the on-screen display as
described on page 20.
•You cannot select the HDMI output mode when the
setup menu is on the TV screen.
1
720P 1080 OFF
480P
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 15
16
EN
DISC PLAYBACK
During playback, press the STILL/PAUSE button.
Press the h or g button.
Slow motion playback will begin and
sound will be muted.
Press the h or g button repeat-
edly to select a desired speed.
Slow forward or reverse speed is differ-
ent depending on the disc. Approximate
speed is 1 (1/16), 2 (1/8), and 3 (1/2).
To return to normal playback, press
the PLAY button.
NOTE:
On DVDs, set “STILL MODE” to “FIELD” on the Display
menu if pictures in the slow playback mode are blurred
(refer to page 23).
4
3
2
1
DVD
Slow Forward / Slow Reverse
1
2
3
D
Button
During playback, press the
STILL/PAUSE button.
Playback will pause and sound
will be muted.
The disc advances frame by frame each time the
STILL/PAUSE button is pressed.
To exit step by step playback, press the PLAY button.
NOTE:
On DVDs, set “STILL MODE” to “FIELD” on the display
menu if pictures in the pause mode are blurred (refer to
page 23).
3
2
1
DVD
Step by Step Playback
F
This function allows you to enlarge the video image and to
pan through the zoomed image.
Press the ZOOM button during playback.
Playback will continue.
Press the ZOOM button repeatedly to select a
desired zoom factor: x2, x4 or off.
Only x2 zoom is available for JPEG.
Use the Cursor buttons (K / L / s / B) to move
the zoomed picture across the screen.
To exit zoom mode, press the ZOOM button.
NOTES:
Zoom function does not work while disc menu is shown.
x4 zoom is not available on some discs.
•Navigation screen is not available on JPEG.
You cannot pan through the zoomed picture on some JPEG files.
4
3
2
1
JPEGDVD
x2 x4
Zoom
DVD
Title / Chapter Search
Press the SEARCH MODE button
repeatedly until the chapter
search or the title search display
appears during playback.
Enter the desired chapter/title
number with the Numeric buttons.
2
1
By using the SEARCH MODE button
By using the SKIP buttons
HH GG
During playback, press the
SKIP
GG
button to move to the
next chapter. Press it repeatedly to skip to subsequent chap-
ters. Press the
SKIP
HH
button to go back to the beginning
of the current chapter. Press it repeatedly to go to the previ-
ous chapters.
Chapter number will appear briefly on the front panel display.
If the SKIP
HH
or
GG
button is pressed while the playback
is paused, the playback after skipping to the next chapter
will be also paused.
NOTES:
Depending on the disc being played, the Numeric
buttons can be used to search for a desired chapter by
entering the chapter number directly. Refer to the man-
ual accompanying the disc.
The SKIP
HH
and
GG
buttons are not available when
playback is stopped.
•A disc that does not contain chapters within titles, the
SKIP
HH
and
GG
buttons change the titles.
During playback, press the h or g button repeat-
edly to select a desired forward or reverse speed.
•For DVDs, fast forward or reverse search speed is dif-
ferent depending on the disc. The approximate speed is
1 (x2), 2(x8), 3 (x20), 4 (x50), and 5 (x100).
•For Audio CDs, MP3 and WMA, the approximate speed
is 1 (x2), 2 (x8), and 3 (x16).
•For Audio CDs, MP3 and WMA, sound will be output at
any speed of fast forward and reverse search.
To return to normal playback, press the PLAY button.
2
1
WMAMP3CDDVD
Fast Forward / Reverse Search
1
234
Button
1234
Button
5
5
During playback, press the
STOP button.
Resume message will appear
on the TV screen.
Press the PLAY button, play-
back will resume from the point
at which playback was stopped.
•To cancel resume, press the STOP button twice.
NOTES:
The resume information be saved even when the power
is turned off.
•For MP3, JPEG or WMA, playback will resume from the
beginning of the current track.
2
1
WMAJPEGMP3CDDVD
Resume
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON
<Example: DVD>
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 16
17
EN
English
To activate Repeat function, press the REPEAT button during
playback.
The repeat mode changes as described below every time
you press the button.
CD
REPEAT TRACK / GROUP / ALL
To activate Repeat function, press the REPEAT button during
playback.
The repeat mode changes as described below every time
you press the button.
DVD
NOTES:
The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
Repeat playback does not function during A-B repeat
playback.
Repeat Title/Chapter is not available with some scenes.
Repeat
REPEAT TITLE / CHAPTER
The REPEAT button is available only during playback.
NOTES:
In the track repeat, the repeat setting will be cleared
when moving to other track.
Repeat playback does not function during A-B repeat
playback.
CHAPTER TITLEOFF
(current chapter repeat) (current title repeat)
(repeat off)
TRACK ALLOFF
(current track repeat) (entire disc repeat)
(repeat off)
DISC PLAYBACK
Press the SEARCH MODE button until the time
search screen appears on
the TV screen.
Within 30 seconds, enter a
desired disc time point on the
disc with the Numeric buttons.
Playback will start at the specified time.
•For Time Search, “0” appears automatically when there
is no need to enter a number. For example,
“0:0_:_ _” appears in the time search screen if the total
time of the disc is less than 10 minutes.
Press the CLEAR button to erase an incorrect input.
3
2
1
CDDVD
1:23:45
-
:
--
:
--
Time Search
Marker Setup Screen
You can use markers to memorize your favorite places on a disc.
Press the SEARCH MODE
button repeatedly until the
display screen and Markers
appear during playback.
Press the Cursor buttons
(s or B) to select 1, 2, 3,
4, 5, 6, 7, 8, 9, or 10 and ensure that “_ _ : _ _ : _ _”
appears in the display.
2
1
CDDVD
--
--
:
--
:
--
1 2 3 4 5 6 7 8 9
10
AC
During playback, press the
SKIP
GG
button to move to the next
track. Press it repeatedly to skip to subsequent tracks. Press the
SKIP
HH
button to go back to the beginning of the current track.
Press it repeatedly to go to the previous tracks
.
Track number will appear briefly on the front panel display.
If the SKIP
HH
or
GG
button is pressed while the play-
back is paused, the playback will be paused again after
skipping to the next track.
NOTE:
The
SKIP
HH
and
GG
buttons are not available when
playback is stopped.
By using the SKIP buttons
HH GG
There are two ways to begin playback an Audio CD, MP3, JPEG
or WMA disc at a specific track.
WMAJPEGMP3CD
Track Search
Press the SEARCH MODE button.
•The track search display
appears.
Within 30 seconds, select a desired track number using
the Numeric buttons.
•For the disc with less than 10 tracks, press the track
number directly.
•For discs with 10 or more but less than 100 tracks, to
play back a single-digit track, press 0 first, then the
track number (e.g. for track 3, press 0, 3). To play back
a double-digit track, press the track number.
•For discs with 100 or more tracks, to play back a sin-
gle- or a double-digit track, press 0 first, then the track
number (e.g. for track 3, press 0, 0, 3, and for track 26,
press 0, 2, 6). To play back a triple-digit track, press the
track number.
Press the CLEAR button to erase the incorrect input.
NOTE:
The +10 button can also bring up the track search dis-
play except for the disc with less than 10 tracks. For
such a disc, track search can be done by just pressing
the track number.
2
1
__/ 15
By using the SEARCH MODE button
When the disc reaches the point you want to
remember, press the ENTER button.
The title or track and elapsed playback time will appear
in the TV screen.
To return to the Marker later, press the SEARCH
MODE button repeatedly during playback and the
Cursor buttons
(s or B) to choose a desired
marker, then press the ENTER button.
Press the SEARCH MODE or RETURN button to exit.
NOTES:
Opening the disc tray, turning off the power or selecting
AC at step and pressing the ENTER button will
erase all Markers.
•To clear a marker, using the Cursor buttons (s or B),
position the cursor on to the marker number to be
cleared and press the CLEAR button.
•You can mark up to 10 points.
2
5
4
3
NOTE:
In the track or group repeat, the repeat setting will be
cleared when moving to other track or group.
WMAJPEGMP3
TRACK ALL
OFF
(current track
repeat)
(entire disc
repeat)
(repeat off)
GROUP
(current folder
repeat)
E6AH0UD(EN).qx3 2006.5.9 14:54 Page 17
18
EN
This function allows you to program a playback order of
Audio CD, MP3, JPEG or WMA in a desired sequence.
In stop mode, press the MODE button.
The program screen will appear.
Press the Cursor buttons
(or ) to select a track, then
press the ENTER button.
Press the CLEAR button to erase
the most recently entered track.
Press the PLAY button to start
programed playback.
3
2
1
CD
DISC PLAYBACK
Program Playback
CD-DA TOTAL 0:03:30
PROGRAM
1 3:30
T
T
T
T
T
T
T
T
T
2 4:30
3 5:00
4 3:10
5 5:10
6 1:30
7 2:30
1 3:30
1 3:30
1/2
1/1
In stop mode, press the MODE
button.
The program screen will appear.
Press the Cursor buttons (K or
L) to select a group, then press
the ENTER button.
•A track selection screen appears.
Press the Cursor buttons (K or
L) to select a track, then press
the ENTER button to save it in
a program.
Press the CLEAR button to erase
the most recently entered track.
The programed track is displayed
in the right-hand screen.
If the entire program cannot be dis-
played on the screen, “
L appears.
Pressing the Cursor button (s)
will show a list of folders that
belong to the hierarchy which is
one-level higher than the currently
selected folder.
Press the PLAY button to start programed playback.
Press the RETURN button, and the stop screen will
show up with the program contents in memory.
4
3
2
1
WMAJPEGMP3
1/1
1/1
MY COLLECTION
ALL CLEAR
ALL CLEAR
ALL CLEAR
PROGRAM
ABC
DEF
GHI
ABC
1/1
PROGRAM
ABC
2/2
1/1
PROGRAM
ABC
DEF
DEF
GHI
JKL
MNO
DEF
DEF
DEF
GHI
JKL
MNO
2/2
This function shuffles the playback order of tracks instead of
playback in the original sequence.
In stop mode, press the
RANDOM button.
The random screen will appear.
Press the PLAY button to start
random playback.
NOTES:
•To repeat the current track in the random selection,
press the REPEAT button repeatedly until TRACK
appears during playback. To repeat the entire random
selection press the REPEAT button repeatedly until
ALL appears during playback.
•You cannot go back to the previous track during ran-
dom playback.
•For a disc containing mixed MP3, JPEG and WMA
files, random playback of those files will be performed.
“SHUFFLE” is displayed on the front panel display at
step .
1
2
1
WMAJPEGMP3CD
CD-DA TOTAL 0:45:55
RANDOM
RANDOM PROGRAM
--no indication--
<Example: CD>
Random Playback
When a CD-R or CD-RW disc with MP3, JPEG or WMA files
is inserted in the DVD player, the file list will appear automat-
ically on the TV screen. The number of tracks is also dis-
played on the front panel.
Press the Cursor buttons (K or L) to select the desired
group (folder) or track.
•To return to the previous screen, press the Cursor but-
ton (s).
If a group (folder) is selected, press the Cursor button
(B) or ENTER button to go on to the track selection
screen. Press the Cursor buttons (K or L) to choose a
track, then press the PLAY or ENTER button.
If a track is selected, press the PLAY or ENTER button
to start playing back tracks. The selected track and the
subsequent tracks will be played back.
1
WMAJPEGMP3
MP3 / JPEG / WMA Playback
Press the A-B REPEAT button
at your chosen starting point.
A- appears briefly on the
TV screen.
Press the A-B REPEAT button
again at your chosen end
point.
A-B appears briefly on the TV screen, and the
repeat sequence begins.
To exit the sequence, press
the A-B REPEAT button.
NOTES:
The A-B Repeat section can only be set within the cur-
rent title (for DVD), or current track (for Audio CD).
A-B Repeat is not available with some scenes on DVD.
•To cancel the A point which was set, press the CLEAR
button.
A-B Repeat playback does not function during title,
chapter, track or all repeat playback.
3
2
1
A-B REPEAT
CDDVD
A -
A - B
OFF
NOTES:
Press the STOP button once and then the PLAY button
again, playback will restart from the point where the
STOP button was pressed. (Program continued.)
Press the STOP button twice and then the PLAY button
again, playback will restart from the first track in the
usual way. Your program is still stored until either the
disc tray is open or power is turned off.
•Up to 99 tracks can be entered.
To erase tracks in the program all together, select ALL
CLEAR at the bottom of the list at step . And, “A-CLEAr”
is displayed on the front panel display at that time.
•To repeat the current track in the program, press the
REPEAT button repeatedly until TRACK appears
during playback. To repeat the entire program press the
REPEAT button repeatedly until ALL appears dur-
ing playback.
If eight or more tracks were set in a program, use the
SKIP
HH
or
GG
button to see all the tracks.
When selecting the folder:
–Press the Cursor button (B) when you want to go to
the next hierarchy.
Press the Cursor button (
{
) when you want to go back
to the previous hierarchy (except for the top hierarchy).
•Even if an inserted disc contains mixed MP3, JPEG
and WMA files, Program function allows 99 tracks in
combination of MP3, JPEG and WMA files.
The front panel display has blinked while setting the
program playback.
2
E6AH0UD(EN).qx3 2006.5.9 14:55 Page 18
19
EN
English
DISC PLAYBACK
Applicable WMA file Remarks
Sampling
frequency
44.1kHz
48kHz
Those frequencies are
applicable to WMA version 9.
Bit rate 48–192kbps
• Ensure that the copyright
function is set to off when
preparing a WMA disc.
Type WMA version 9
• A prohibition “disable” sym-
bol will appear if the user
attempts to run a non-repro-
ducible file such as copy-
right-protected.
• Recorded in multi-channel
format cannot be played
back.
This player recommends the use of files recorded at the fol-
lowing specifications:
Information on MP3, JPEG and WMA discs
This DVD player can play back images and sounds from data
recorded in MP3 and JPEG formats on CD-R and CD-RW discs.
A file with an extension of “.mp3 (MP3)” is called an MP3 file.
•A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is
called a JPEG file.
The DVD player can run an image file conforming to the
Exif specification. Exif is a file format, Exchangeable
Image File format established by Japanese Electronic
Industry Development Association (JEIDA).
A file with an extension of “.wma (WMA)” is called a WMA file.
Files whose extension is other than “.mp3 (MP3)”, “.jpg
(JPG)” and “.jpeg (JPEG)” or “.wma (WMA)” will not be
listed on the MP3, JPEG or WMA menu.
If the file is not recorded in MP3, JPEG or WMA format,
noise may be produced even if the file extension is either
“.mp3 (MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” or “.wma (WMA)”.
The name of group and track can be displayed up to 25 char-
acters. Unrecognizable characters will be replaced with aster-
isks. The ninth and deeper hierarchies cannot be displayed.
Unplayable groups or tracks may be displayed depending
on the recording conditions.
If the TOP MENU button is pressed when a file list is dis-
played, the first item will be highlighted.
Kodak Picture CD
The DVD player can also run JPEG files stored on Kodak
Picture CDs. You can enjoy picture images on the television
set by playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that provide
developing service of Kodak Inc.
Applicable MP3 file Remarks
Sampling
frequency
44.1kHz
48kHz
• It is prohibited to record
MP3 sound on a digital
device when the connection
is made digitally.
Type
MPEG1
audio layer 3
• MP3 files recorded at fixed
bit rate of 32 kbps or higher
are recommended.
Applicable JPEG file Remarks
Size of
image
Upper limit:
6300x5100 dots
Lower limit:
32x32 dots
• A JPEG image that extends
beyond the screen is
reduced so that it will be
displayed within the screen.
When Kodak Picture CD is
inserted in the DVD Player,
Kodak Picture CD menu
appear automatically on
the TV screen.
If all menu items cannot be
displayed on the screen
scope, “Gappears at the
right bottom of the screen,
indicating that the user can
view remaining items on the next page. H appears, it
indicates that the user can view other items on the pre-
vious page. The track number of the currently highlight-
ed item and the total tracks are shown at the center bot-
tom of the screen.
If “G is shown at the right bottom, use the SKIP G
button to view the next page. If “H is shown at the left
bottom, use the SKIP H button to view the previous
page.
It may take some time until all menu items are dis-
played on the menu screen.
Press the Cursor buttons (K / L / s / B), select a
desired track to be played back, then press the
PLAY or ENTER button.
If a Kodak Picture CD file is selected, an image will be
played back from the selected track and go to the next
one in turn.
Press the STOP button, to stop playback.
NOTES on JPEG and Kodak Picture CD:
•A track is displayed for 5 or 10 seconds and then the
next track is displayed.
•Every press on the ANGLE button will turn the image
clockwise by 90 degrees when an image is displayed.
•To change the size of the playback image, press the
MODE button twice. The size change mode appears on
top of the TV screen during playback. Then press the
Cursor buttons (s or B) or ENTER button to switch
between NORMAL (100%) and SMALL (95%).
3
2
1
Picture1 Picture2 Picture3
Picture4
Current track number /
the number of total tracks
Picture5 Picture6
1/32
When selecting the folders
–Press the Cursor button (
BB
) when you want to go to
the next hierarchy.
–Press the Cursor button ({) when you want to go
back to the previous hierarchy (except for the top hier-
archy).
Press the TOP MENU button to return to the first item.
Press the STOP button to stop playback.
NOTES:
• Folders are known as Groups; files are known as Tracks.
• A symbol of is shown on the top of the group name.
• A symbol of is shown on the top of MP3 files.
• A symbol of is shown on the top of JPEG files.
• A symbol of is shown on the top of WMA files.
• Maximum of 255 folders can be recognized.
• Maximum of 999 files can be recognized.
• Up to 8 hierarchies can be recognized.
• If the track extends beyond the scope of screen, a
down arrow Lappears, indicating that the user can
view another part on the previous page. The current
page number and the number of total pages are shown
on the left of the down arrow L”.
• If no MP3, JPEG or WMA files are found in the group,
the group is not displayed.
The DVD player can reproduce data recorded as per
ISO 9660 Level 1, Level 2 or Joliet on the disc.
• It can also run a disc on which data is recorded in a
multi-session.
• For more details of recording systems, refer to the
instruction manual for the CD-R / CD-RW drive or the
writing software.
• For MP3 and WMA files recorded in Variable Bit Rate
(VBR), the unit may not display the actual elapsed
time.
2
E6AH0UD(EN).qx3 2006.5.9 14:55 Page 19
20
EN
DISC PLAYBACK
Press the DISPLAY button
during playback.
Current file name will be dis-
played.
<Example: MP3>
Press the DISPLAY button.
Current track number/total
tracks and elapsed time (MP3)
will be displayed.
Current repeat setting appears only when the Repeat
setting is active.
(T:Track repeat/ A: All (disc) repeat/ G: Group
repeat).
When you are playing back a disc with MP3 or JPEG
files in program or random mode, PROGRAM (or
RANDOM) will be displayed.
Press the DISPLAY button again.
During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button to exit.
Press the DISPLAY button again.
Current HDMI status will be displayed during the HDMI output
mode. (Refer to NOTE FOR HDMI DISPLAY on this page.)
Press the DISPLAY button again to exit.
5
4
3
2
1
JPEGMP3
TRACK 01
TR 1/36 0:01:15
T
Press the DISPLAY button
during playback.
Current file name will be displayed.
Press the DISPLAY button again.
Title name based on tag infor-
mation of currently played-
back file will be displayed.
Press the DISPLAY button
for the third time.
•Artist name based on tag infor-
mation of currently played-
back file will be displayed.
Press the DISPLAY button again.
•Current track number/total
tracks and elapsed time
will be displayed.
Current repeat setting appears only when the Repeat
setting is active.
(T:Track repeat/ A: All (disc) repeat/ G: Group
(folder) repeat).
When you are playing back a disc in program or random
mode, PROGRAM (or RANDOM) will be displayed.
Press the DISPLAY button again.
During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button to exit.
Press the DISPLAY button again.
Current HDMI status will be displayed during the HDMI output
mode. (Refer to NOTE FOR HDMI DISPLAY on this page.)
Press the DISPLAY button again to exit.
NOTE:
If the file does not contain tag information, NOT AVAIL-
ABLE will be displayed.
7
6
5
4
3
2
1
WMA
TRACK 01
TITLE NAME
ARTIST NAME
TR 1/36 0:01:15
T
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
Press the DISPLAY button
during playback.
Current chapter number/total
chapters, elapsed time and
remaining time of the current chapter, and current play-
back status will be displayed.
Press the DISPLAY button again.
Current title number/total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
Press the DISPLAY button
for the third time.
The bit rate (the amount of
video data currently being
read) and current playback status will be displayed.
Current repeat setting appears on the display bar only
when the repeat setting is active.
(C:Chapter repeat/ T: Title repeat/A B: A-B
repeat)
If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is played back. L1: Layer 1 is played back.)
Press the DISPLAY button again.
Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
this page.)
Press the DISPLAY button again to exit.
5
4
3
2
1
DVD
IIIIIII
T L1
Changing the On-Screen Display
9/49 0:00:00 -0:03:30
Progressive JPEGs (JPEG files saved in the progres-
sive format) will not be played back on this DVD player.
High resolution JPEG files take longer to be displayed.
The size change mode may have no effect on some
files (e.g. files with a small picture size).
NOTES on WMA:
The DVD player can reproduce data recorded as ISO
9660 level 2 with 31 characters file name included
punctuation marks. The name of file can be displayed
up to 25 characters.
Maximum of 8 subfolders can be recognized.
It can also be displayed tag information of WMA at
least 64 characters.
•A file with an extension of Joliet as Unicode format in
up to 64 characters can be recognized.
This unit cannot play back copyright protected WMA files.
NOTE FOR HDMI DISPLAY:
The displayed HDMI status
are as follows:
1. Information for image out-
put/Resolution of image
2. Sound output format
3. Maximum number of audio channels that can be
accepted by the connected equipment
VIDEO INFO. :
YCbCr/1080i
AUDIO INFO. :
BITSTREAM
MAX CHANNEL
: 2ch
Press the DISPLAY button during playback.
Current track number/total tracks, elapsed time and
remaining time of the current track, and current play-
back status will be displayed.
Current repeat setting appears on the display bar only
when the Repeat setting is active.
(T:Track repeat/ A: All tracks repeat/A B: A-B
repeat)
Press the DISPLAY button again.
Current track number/total tracks, elapsed time and
remaining time of the entire disc, and current playback
status will be displayed.
Current repeat setting appears on the display bar only
when the Repeat setting is active.
(T:Track repeat/ A: All tracks repeat/A B: A-B
repeat)
When you are playing back a disc in program or random
mode, PROGRAM (or RANDOM) will be displayed.
Press the DISPLAY button again to exit.
3
2
1
CD
E6AH0UD(EN).qx3 2006.5.9 14:55 Page 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

Denon DHT-487DV Manuel utilisateur

Catégorie
Lecteurs DVD
Taper
Manuel utilisateur

dans d''autres langues