Nextar M3-07 Software Manual

Marque: Nextar

Modèle: M3-07

Taper: Software Manual

-07

Precautions

Very important information. Please read this section carefully before using this product.

This product is intended to provide turn-by-turn instructions to safely guide you to your desired

destination. Please make sure that all persons using this navigation software carefully read these

precautions and the operating instructions in the User's Guide.

Nextar cannot accept any responsibility whatsoever for accidents resulting from failure to observe

these precautions.

Your personal judgment, traffic regulations, and common sense must always take

precedence over instructions produced by the software.

 This product is not a substitute for your driving technique, driving knowledge or especially

your personal judgment. Route suggestions made by this navigation system should never

supersede any traffic regulations, your personal judgment, or your knowledge of safe driving

practices. If you feel that a route suggestion made by the software instructs you to perform an

unsafe or illegal maneuver, places you in an unsafe situation, or routes you into an area that

you consider unsafe, do not follow the instructions. Your personal judgment, traffic regulations,

and common sense must always take precedence over instructions produced by the software.

 When your vehicle is moving, keep your eyes on the road instead of looking at the screen. If

you need to look at the screen for a prolonged time, always park the car in a safe manner and

in accordance with all traffic regulations.

 Do not select or input destinations, change settings or otherwise manually operate this

software unless you have parked your car in a safe manner, observing all traffic regulations.

 If you are responding to an emergency, it may not be prudent to rely on this system unless

you have no other means to obtain accurate directions. The database does not include all of

the facilities and streets necessary for emergency response, and the system’s maps may not

reflect recent changes in roads, traffic controls and driving conditions. Use your own judgment

in these situations.

 The database utilized by this software is the most accurate and up-to-date database available.

Because of road closures, construction, weather, new roads and other conditions, the

database might not contain accurate information regarding all streets and locations. If so, the

system might not be able to correctly guide you on your route or may inaccurately estimate

the time needed to reach your destination. Please use your judgment in these cases.

Renewing your subscription to the database will aid in keeping it up-to-date.

 There are situations when the navigation system will incorrectly display the vehicle’s position

on the map. Usually this situation will correct itself automatically. Use your own judgment at all

times. If you need to reset the position, pull over in a safe manner observing all traffic

regulations.

Points to Observe for Safe Usage

Warning

Failure to follow the following instructions

can result in severe injury or death.

 Read this manual carefully and make sure you understand the cautions. Nextar is not

responsible for problems resulting from failure to observe the precautions, warnings, and

instructions in this manual. Store this guide where it will be accessible at all times, for

example in your glove compartment.

 The driver must not manually operate the software while driving the vehicle. This may lead to

traffic accidents. If the driver is to operate the software with the controls, the driver must pull

over in a safe manner observing all traffic regulations.

 When your vehicle is moving, keep your eyes on the road instead of looking at the screen.

Listen to the voice prompts for guidance instructions. If you wish to look at the display, pull

over in a safe manner observing all traffic regulations.

 Immediately stop using the software if a problem arises. Problems might include no sound or

display errors.

 Always comply with all traffic regulations.

 Regardless of the guidance instructions, do not enter roads on which your type of vehicle is

prohibited or which appear unsafe. Always observe signs.

 Keep the volume low enough so that you can hear outside sounds.

 Stop the vehicle before performing any operation that could interfere with driving. Always pull

over in a safe manner observing all traffic regulations.

Contents

1 — Program Basics __________________________________________________________ 4

Main Map Display .........................................................................................................................4

Map Displays Modes.....................................................................................................................4

Turn-By-Turn Views ......................................................................................................................5

Browsing the Map Display ............................................................................................................6

Zooming In and Out......................................................................................................................7

Data Entry.....................................................................................................................................7

2 — Set Destinations__________________________________________________________ 9

To Set a Destination Using an Address ........................................................................................9

To Set a Destination Using a Point Of Interest ...........................................................................10

To Set a Destination Using Cross Roads....................................................................................11

To Set a Destination Using an Item in Favorites.........................................................................12

To Save a Destination as a Favorite or Home Location .............................................................12

To Cancel a Route ......................................................................................................................13

To Avoid Traffic or Construction..................................................................................................14

4 — Program Settings________________________________________________________ 15

Language....................................................................................................................................15

GPS Status..................................................................................................................................15

Security (Safety Lock).................................................................................................................15

Map Settings...............................................................................................................................16

Route Settings ............................................................................................................................16

Exit..............................................................................................................................................16

Set Origin....................................................................................................................................16

Demo Mode.................................................................................................................................17

About...........................................................................................................................................17

Tutorial ........................................................................................................................................17

5 — Icons and Controls ______________________________________________________ 18

Compass and GPS .....................................................................................................................18

User Interface Controls and Icons ..............................................................................................18

Turn-By-Turn Icons .....................................................................................................................20

1 — Program Basics

The GPS navigational voice guidance program uses statistical and probability analysis to help you

select and set destinations quickly and easily. As you travel, the navigation program displays your

location on the map. Voice guidance tells you when and where to turn. The main screen displays

turn directions, compass heading, distance to next maneuver, and street names. If you leave your

route, the navigation program calculates a new route to your destination automatically.

Main Map Display

On startup, the navigation program displays your current position, street names, and Point of

Interest icons.

Map Displays Modes

Tap the Map Display Mode button to choose a map display option as described below.

Heading Up

The vehicle icon points toward the direction of

travel; the map rotates under the icon as you

travel.

Map Display

Mode button

Current Position

Icon

MENU Button

Compass and

GPS Status

Map Zoom

Level Buttons

(+) and (-)

Tap icon to view

name of Current

Road or Upcoming

Crossroad

North Up

North is at the top. The vehicle icon points in

the direction of travel.

The map displays a 3D perspective.

Turn-By-Turn Views

Once you set a destination and select GO, the screen displays Turn-By-Turn views.

Main Turn-by-Turn View

Blue line shows route.

Tap to select next guidance view.

Next maneuver. Tap to repeat the

voice instruction.

Estimated arrival time and

distance to destination

Distance to next maneuver.

Split Map View

Maneuvers List View

Browsing the Map Display

Tap on the map to enter Browse Mode. (See below.)

To exit Browse Mode, tap the “X” in the upper right corner.

Tap-and-drag to

scroll the map.

Tap “X” to exit Browse

mode.

Browse Mode indicator

shows distance from

current position to cursor

position.

Tap “i” to view

information about the

selected location.

Tap to scroll up.

Tap to scroll down.

Tap to jump to first maneuver in the list.

Tap to select next guidance view.

The left pane displays travel progress in

3D, Heading Up, or North Up mode.

The right pane displays a close up view

of the approaching maneuver.

Estimated arrival time and

distance to destination

Tap to jump to last maneuver in the list.

Next maneuver.

List of re

uired maneuvers route.

Tap to select the next guidance view.

Tap on a POI icon,

and then tap “i” in

lower right to view

related information.

Zooming In and Out

Tap + or – to change the zoom level.

Data Entry

When you set a destination, the navigation

program may prompt you to enter required

information, such as the name of a city or the

name of a street. As you enter information, the

screen highlights the characters that are likely

to be next.

To make corrections, tap on the BACKSPACE

button. To view a list of selections that match

what you have entered so far, tap LIST, or tap

on a matching selection in the “mini-list” that

appears at the top. To exit, tap MAP.

If you tap LIST, a full list of selections

appears. To scroll the list, tap on the Up or

Down arrow on the scroll control. Tap directly

on an item to select it. Otherwise, tap KEYS to

enter more characters, or tap MAP to exit.

2 — Set Destinations

To Set a Destination Using an Address

Choose:

Select an option as follows:

Use this option to go to an address in a city you choose.

Use this option to go to an address in a region you choose.

Use this option to go to the center of a city you choose.

Follow the prompts to set a destination. The navigation program displays the destination location.

(See below.)

Choose GO. Voice instructions will guide you to your destination while the screen displays your

present location and Turn-By-Turn information.

To Set a Destination Using a Point Of Interest

Choose:

Select an option as follows:

Use this option to go to a point of interest in a city you choose.

Use this option to go to a point of interest you choose by name.

Use this option to go to a point of interest near your current location.

Use this option to go to a point of interest near your destination.

Follow the prompts to set a destination. Once you set a destination, the navigation program

displays the destination location on the map. (See below.)

Choose GO. Voice instructions will guide you to your destinations while the screen displays your

present location and Turn-By-Turn information.

To Set a Destination Using Cross Roads

Choose:

Select an option as follows:

Use this option to go to an address in a city you choose.

Use this option to go to an address in a region you choose.

Follow the prompts to set a destination. Once you set a destination, the navigation program

displays the destination location on the map. (See below.)

Choose GO. Voice instructions will guide you to your destinations while the screen displays your

present location and Turn-By-Turn information.

To Set a Destination Using an Item in Favorites

Choose:

Select an option as follows:

Use this option to go to a location name in the Favorites list.

Use this option to set a location or destination as Home.

Use this option to rename a location in the Favorites list.

Use this option to delete a location in the Favorites list.

To Save a Destination as a Favorite

or Home Location

Set a destination, and then choose:

Enter a name, and then tap OK or tap the

HOME icon to save the destination as a Home

location.

You can store up to 300 items in the Favorites folder.

—Or—

Browse to the desired location on the map, and then choose:

Enter a name, and then tap OK or tap the

HOME icon to save the destination as a Home

location.

—Or—

Choose:

Select an item in the list, and then choose:

Enter a name, and then tap OK or tap the

HOME icon to save the destination as a Home

location.

To Cancel a Route

Choose:

To Avoid Traffic or Construction

Choose:

Tap to select the distance you want to

avoid. For example, if you wish to

circumnavigate heavy traffic or

construction over the next three miles,

choose 3 Miles. Choose Cancel Detour

to re-calculate a normal route.

Points to Observe for Safe Usage 15

4 — Program Settings

Language

Tap to select an option, and then tap OK.

GPS Status

Displays GPS status.

Security (Safety Lock)

The Security (Safety Lock) feature enables you to set a passcode to secure and encrypt all

personal data. If you lose the device, or if someone is able to get data out of the device, the data

remains securely encrypted. Without the correct password, no one can use the device. If you

forget your password, you may use the factory reset password (20500). NOTE: Use of the

factory reset password ERASES all personal data from the device.

Tap Set/Change PIN to enable the security feature.

The system will prompt you for a passcode.

Subsequent use of the device will require the code.

Tap Unlock Device to disable the security feature.

16 Guide de Commencement Rapide

Map Settings

Tap to select options, and then tap OK.

Route Settings

Tap to select an option, and then tap OK.

Exit

Closes and exits the application.

Set Origin

Use this option to set a starting point that is different

than the current GPS position.

Points to Observe for Safe Usage 17

Demo Mode

Use this mode to preview a route.

About

Displays program version and copyright

information.

Tutorial

Displays an on-screen tutorial.

18 Guide de Commencement Rapide

5 — Icons and Controls

Compass and GPS

Icon Name Description

Heading-Up The vehicle icon points toward the direction of travel. The map rotates

under the icon as you travel.

North-Up North is at the top. The vehicle icon points in the direction of travel. The

compass displays the direction of travel.

3-D The map displays in 3D perspective.

Compass Current compass heading and time.

User Interface Controls and Icons

Control or Icon Name Description

Current Vehicle Position

and Heading Icon

Indicates the current car position and heading on the map

display.

Browse Mode Cursor Tap and drag to scroll the map. Press and hold to center the

map at the selected location.

Browse Mode indicator Displays the distance from the current vehicle position to the

location indicated by the cursor. Tap “X” to exit Browse

mode.

Current Street / Next

Cross Street Toggle

Tap to view the name of the current street or the name of the

next cross street along the bottom of the screen.

Information Button Tap to view additional information about the location at the

cursor position.

Volume icon Tap to activate the popup volume control.

Zoom Control Tap + to zoom in. Tap - to zoom out.

Close Button Returns you to the previous screen.

Points to Observe for Safe Usage 19

Control or Icon Name Description

Backspace Deletes characters like a Backspace key.

Map Button Tap to return to the main map display.

Auto-Complete Keys Displays the next valid characters only. The highlighted

characters represent the three most likely characters.

Highlighted keyboard

letters

Displays all characters. The highlighted characters represent

the next most likely characters.

List Button Lists all possible selections based on the characters entered

thus far.

Empty When available, allows you to delete the contents of a user-

defined or user-created list.

Keys When available, returns you to the data entry screen.

Scroll Buttons When available, allows you to scroll a list of items.

OK Button Accepts entered text and advances to the next action.

VIEW Options Button Cycles the main display through three views: Main Turn-by-

Turn, Split Map, and Maneuvers List.

GO / SAVE & GO GO: Tap to start voice guidance and Turn-By-Turn views to

the selected location.

SAVE & GO: Tap to save the selected location in the

Favorites list, and then start guidance to the selected

location.

La page charge ...

Nextar M3-07 Software Manual

Marque: Nextar

Modèle: M3-07

Taper: Software Manual

Télécharger le PDF

rapport

dans d''autres langues

English: Nextar M3-07

Nextar M3-07 Software Manual

Nextar M3-07 Software Manual

dans d''autres langues

Documents connexes

Autres documents