Sony XR-CA630X Manuel utilisateur

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record these numbers in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. XR-CA630X Serial No.

XR-CA630X

For installation and connections, see the supplied installation/connections manual.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/raccordement fourni.

3-237-871-11 (2)

US

FR

Operating Instructions

Mode d’emploi

FM

/

AM

Cassette Car Stereo

2

Welcome !

Thank you for purchasing this Sony Cassette

Player. You can enjoy its various features even

more with:

• Optional CD/MD units (both changers and

players)*

1

.

• CD TEXT information (displayed when a CD

TEXT disc*

2

is played on a connected optional

CD unit with the CD TEXT function).

• Supplied controller accessory

Card remote commander RM-X119

• Optional controller accessory

Rotary commander RM-X4S

*1 This unit works with Sony products only.

*2 A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names. This information is recorded on

the disc.

Warning

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment

and receiver.

–

Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

–

Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

The “XM Ready” logo indicates that this product

will control a Sony XM tuner module (sold

separately).

Please see your nearest authorized Sony dealer

for details on the XM tuner module.

For instructions on XM tuner operation, please

refer to the XM tuner module’s included

instruction manual.

3

Table of Contents

Location of controls. . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on Cassettes. . . . . . . . . . . . . . . . . . . . . 6

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 7

Detaching the front panel . . . . . . . . . . . . . . . 7

Setting the clock . . . . . . . . . . . . . . . . . . . . . . 8

Cassette Player

Listening to a tape . . . . . . . . . . . . . . . . . . . . . 9

Playing a tape in various modes . . . . . . . . . . 9

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . 10

Receiving the stored stations. . . . . . . . . . . . 10

Storing only the desired stations . . . . . . . . . 11

Storing station names

— Station Memo. . . . . . . . . . . . . . . . . . . 11

Tuning in a station through a list

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 12

Other Functions

Using the rotary commander . . . . . . . . . . . . 13

Adjusting the sound characteristics. . . . . . . 14

Quickly attenuating the sound. . . . . . . . . . . 14

Changing the sound and display settings

— Menu . . . . . . . . . . . . . . . . . . . . . . . . . 15

Selecting the sound position

— My Best sound Position (MBP). . . . . 16

Setting the equalizer (EQ7) . . . . . . . . . . . . . 16

CD/MD Unit (optional)

Playing a CD or MD. . . . . . . . . . . . . . . . . . 17

Display items . . . . . . . . . . . . . . . . . . . . . . . 18

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 18

Playing tracks in random order

— Shuffle Play. . . . . . . . . . . . . . . . . . . . 18

Labeling a CD

— Disc Memo . . . . . . . . . . . . . . . . . . . . 19

Locating a disc by name

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 20

MP3 playable CD Unit (optional)

Listening to an MP3 file . . . . . . . . . . . . . . . 20

Display items . . . . . . . . . . . . . . . . . . . . . . . 21

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 21

Playing tracks in random order

— Shuffle Play. . . . . . . . . . . . . . . . . . . . 21

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 22

Removing the unit. . . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 25

Error displays/Messages . . . . . . . . . . . . . . . 26

4

Location of controls

Refer to the pages listed for details.

a MBP button 16

b MODE (o) button

To change the operation.

c DSPL (display mode change) button

d Volume control dial

e Display window

f Z (eject) button (located on the front side

of the unit, behind the front panel) 9

g MENU button

To change the menus.

h LIST button 12, 19, 20

i OPEN button 7, 9

j OFF (Stop/Power off) button* 7, 9

k RESET button (located on the front side of

the unit, behind the front panel) 7

l SOURCE (Power on/Tape/Radio/CD/

MD) button

To select the source.

m SCRL (scroll) button 18

n Receptor for the card remote

commander

o SOUND button 14

p ENTER button

To enter a setting.

q EQ7 button 16

* Warning when installing in a car without

an ACC (accessory) position on the

ignition switch

After turning off the ignition, be sure to press

(OFF) on the unit for 2 seconds to turn off the

clock display.

Otherwise, the clock display does not turn off

and this causes battery drain.

XR-CA630X

SOURCE

MBP

O

F

S

C

R

L

D

S

P

L

M

O

D

E

SEEK

EQ7

S

O

U

N

D

E

N

T

E

R

L

I

S

T

M

E

N

U

D

I

S

C

/

P

R

E

S

E

T

O

P

E

N

D

I

S

C

/

P

R

E

S

E

T

5

r DISC/PRESET buttons (+/–)

To receive preset stations, change the disc*

1

,

skip albums*

2

, and select a menu.

*1 When an optional CD/MD unit is connected.

*2 Available only when optional CD unit with the

MP3 file control function is connected.

s SEEK buttons (–/+)

To skip tracks, fast-forward, reverse a track,

tune in stations automatically, find a station

manually, and select a setting.

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

a DSPL button

b Number buttons

(1) REP

(2) SHUF

To store stations, receive stored stations.

c MBP button

d MENU button

e SOURCE button

f SEEK (</,) buttons

g SOUND button

h OFF button

i VOL (+/–) buttons

j EQ7 button

k MODE (o) button

l LIST button

m DISC (M/m) buttons

n ENTER button

o ATT button

Note

If the unit is turned off by pressing (OFF) for

2 seconds, it cannot be operated with the card remote

commander unless (SOURCE) on the unit is pressed,

or a cassette tape is inserted to activate the unit first.

Tip

See “Replacing the lithium battery” on page 22 for

details on how to replace the batteries.

SEEK

EQ7

S

O

U

N

D

E

N

T

E

R

L

I

S

T

M

E

N

U

D

I

S

C

/

P

R

E

S

E

T

O

P

E

N

D

I

S

C

/

P

R

E

S

E

T

SEEK

D

I

S

C

/

P

R

E

S

E

T

D

I

S

C

/

P

R

E

S

E

T

(SEEK)

(–): to select

leftwards/

.

(SEEK)

(+): to select

rightwards/

>

(DISC/PRESET)

(+): to select upwards

In menu mode, the currently selectable button(s) of

these four are indicated with a “ M” in the display.

(DISC/PRESET)

(–): to select downwards

Card remote commander RM-X119

DISC

–

ATTOFF

REP SHUF

DSPL

1

4

MODE

2

5

3

6

SOURCE

DISC

+

SEEK

+

SEEK

–

SOUND

ENTER

MENU

LIST

EQ7MBP

VOL

6

Precautions

• If your car was parked in direct sunlight, allow

the unit to cool off before operating it.

• If no power is being supplied to the unit, check

the connections first. If everything is in order,

check the fuse.

• If no sound comes from the speakers of a two-

speaker system, set the fader control to the

center position.

• When a tape is played back for a long period,

the cassette may become warm because of the

built-in power amplifier. However, this is not a

sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

To maintain high quality sound

Be careful not to splash juice or other soft drinks

onto the unit or tapes.

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

• The sound may become distorted while playing

the cassette. The cassette player head should be

cleaned after each 50 hours of use.

The use of cassettes longer than 90 minutes

is not recommended except for long

continuous play

The tape used for these cassettes is very thin and

tends to stretch easily.

Frequent playing and stopping of these tapes

may cause them to become entangled in the

cassette deck mechanism.

Slack

7

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset the

unit.

Remove the front panel and press the RESET

button with a pointed object, such as a ball-point

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional amplifier and do not

use the built-in amplifier, the beep sound will be

deactivated.

1 Press (OFF)*.

Tape playback or radio reception stops (the

key illumination and display remain on).

* If your car has no ACC position on the ignition

switch, be sure to turn the unit off by pressing

(OFF) for 2 seconds to avoid car battery drain.

2 Press (OPEN), then slide the front

panel to the right, and gently pull out

the left end of the front panel.

Notes

• If you detach the panel while the unit is still turned

on, the power will turn off automatically to prevent

the speakers from being damaged.

• Do not drop or put excessive pressure on the front

panel and its display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in parked

cars or on dashboards/rear trays.

Tip

When carrying the front panel with you, use the

supplied front panel case.

RESET button

continue to next page t

1

2

8

Attaching the front panel

Place hole A of the front panel onto the spindle

B on the unit, then lightly push the left side in.

Note

Do not put anything on the inner surface of the front

panel.

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press either side

of (DISC/PRESET) repeatedly until

“CLOCK” appears.

1Press (ENTER).

The hour indication flashes.

2Press either side of (DISC/PRESET)

to set the hour.

3Press the (+) side of (SEEK).

The minute indication flashes.

4Press either side of (DISC/PRESET)

to set the minute.

2 Press (ENTER).

The clock starts. After the clock setting is

completed, the display returns to normal play

mode.

Tip

When D.INFO mode is set to ON, the time is always

displayed (page 15).

x

9

Cassette Player

Listening to a tape

1 Press (OPEN) and insert a cassette.

Playback starts automatically.

2 Close the front panel.

If a cassette is already inserted, press (SOURCE)

repeatedly until “FORWARD” or “REVERSE”

appears to start playback.

FORWARD: The side facing up is played.

REVERSE: The side facing down is played.

Note

The AMS function may not work when:

– the blanks between tracks are shorter than 4

seconds.

– there is noise between tracks.

– there are long sections of low volume or quiet

sections.

Playing a tape in various

modes

You can play the tape in various modes:

• REP (Repeat Play) the current track.

• BL.SKP (Blank Skip) skips blanks longer than

8 seconds.

• ATA (Automatic Tuner Activation) turns on the

tuner automatically when fast-winding the tape.

• METAL (Metal) lets you play a metal or CrO

2

tape.

1 During tape playback, press (MENU).

2 Press either side of (DISC/PRESET)

repeatedly until the desired mode

appears.

3 Press (+) side of (SEEK) to select

“ON.”

Example: ATA mode

Play mode starts.

4 Press (ENTER).

To return to normal playback mode, select

“OFF” in step 3.

Playing tracks repeatedly

— Repeat Play

During playback, press (1) on the

card remote commander repeatedly

until “REP-ON” in the display appears.

To return to normal playback mode, select “REP-

OFF.”

Tip

During repeat playback, press (MODE). “REP”

disappears from the display and repeat mode is

canceled.

To Press

Change the tape’s

playback direction

(MODE) (o)

Stop playback (OFF)

Eject the cassette (OPEN) then Z

Skip tracks

–Automatic

Music Sensor

(SEEK) (./>)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK) (m/M)

[hold to desired point]

10

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, AM1, and AM2).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (MENU), then press either side

of (DISC/PRESET) repeatedly until

“BTM” appears.

4 Press (ENTER).

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on the card remote commander on

which the desired station is stored.

Tip

Press either side of (DISC/PRESET) to receive the

stations in the order they are stored in the memory

(Preset Search function).

If preset tuning does not work

Press either side of (SEEK) to search

for the station (automatic tuning).

Scanning stops when the unit receives a

station. Repeat until the desired station is

received.

Tips

• If automatic tuning stops too frequently, turn on the

Local Seek to limit seek to stations with stronger

signals (see “Changing the sound and display

settings” on page 15).

• If you know the frequency of the station you want to

listen to, press and hold either side of (SEEK) to

locate the approximate frequency, then press

(SEEK) repeatedly to fine adjust to the desired

frequency (manual tuning).

If FM stereo reception is poor

Select monaural reception mode

(see “Changing the sound and display

settings” on page 15).

The sound improves, but becomes monaural

(“ST” disappears).

Note

If interference occurs, this unit will automatically

narrow the reception frequency to eliminate noise (IF

AUTO function). In such cases, some FM stereo

broadcasts may become monaural while in the stereo

reception mode.

Tip

To always hear FM stereo broadcasts in stereo, you

can change the IF AUTO setting and widen the

frequency signal reception (see “Changing the sound

and display settings” on page 15). Note that some

interference may occur in this setting.

11

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK) to tune in

the station that you want to store.

4 Press the desired number button ((1)

to (6)) on the card remote commander

for 2 seconds until “MEM” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

Storing station names

— Station Memo

You can assign a name to each radio station and

store it in memory. The name of the station

currently tuned in appears in the display. You can

assign a name using up to 8 characters for a

station.

Storing the station names

1 Tune in a station whose name you

want to store.

2 Press (MENU), then press either side

of (DISC/PRESET) repeatedly until

“NAMEEDIT” appears.

3 Press (ENTER).

4 Enter the characters.

1Press the (+)*

1

side of

(DISC/PRESET) repeatedly to select

the desired character.

A t B t C ... t 0 t 1 t 2 ... t +

t – t

*

... t _*

2

t A

*1 For reverse order, press the (–) side of

(DISC/PRESET).

*2 (blank space)

2Press the (+) side of (SEEK) after

locating the desired character.

If you press the (–) side of (SEEK), you can

move back to the left.

3Repeat steps 1 and 2 to enter the

entire name.

5 Press (ENTER).

continue to next page t

12

Tips

• Simply overwrite or enter “

_” to correct or erase a

name.

• There is another way to start storing station names:

Press (LIST) for 2 seconds instead of performing

steps 2 and 3. You can also complete the operation

by pressing (LIST) for 2 seconds instead of step 5.

Erasing the station name

1 During radio reception, press (MENU),

then press either side of

(DISC/PRESET) repeatedly until “NAME

DEL” appears.

2 Press (ENTER).

3 Press either side of (DISC/PRESET)

repeatedly to select the station whose

name you want to erase.

4 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 3 to 4 if you want to erase other

names.

5 Press (MENU) twice.

The unit returns to normal radio reception

mode.

Note

If you have already erased all of the station names,

“NO DATA” appears in step 4.

Tuning in a station through a

list

— List-up

1 During radio reception, press (LIST)

momentarily.

The frequency or the name assigned to the

current station appears in the display.

2 Press either side of (DISC/PRESET)

repeatedly until you find the desired

station.

If no name is assigned to the selected station,

the frequency appears in the display.

3 Press (ENTER) to tune in the desired

station.

13

Other Functions

You can also control the unit (and optional CD/

MD units) with a rotary commander (optional).

Using the rotary commander

First, attach the appropriate label depending on

how you want to mount the rotary commander.

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons

By rotating the control

Rotate and release to:

– Locate the beginning of tracks on the tape.

– Tune in stations automatically.

– Skip tracks on the disc.*

1

Rotate, hold, and release to:

– Fast-wind the tape.

– Find a station manually.

– Fast-forward/reverse a track.*

1

Tip

To start playback while fast-winding the tape, press

(MODE).

By pushing in and rotating the control

Push in and rotate the control to:

– Receive preset stations.

– Change the disc during CD(MD)

playback.*

1

During playback of a CD containing MP3

files*

3

Push in and repeat rotating quickly to:

– Change discs one by one.

Push in, then rotate and hold to:

– Change albums.

*1 Only if the corresponding optional equipment is

connected.

*2 If your car has no ACC (accessory) position on the

ignition key switch, be sure to press (OFF) for

2 seconds to turn off the clock indication after

turning off the ignition

*3 Available only when optional CD unit with the MP3

file control function is connected.

Press To

(SOURCE) Change source

(radio/CD*

1

/MD*

1

/Tape)/

Power on

(MODE) Change operation

(radio band/CD unit*

1

/MD

unit*

1

/Tape playback

direction)

(ATT) Attenuate sound

(OFF)*

2

Stop playback or radio

reception/Power off

(SOUND) Adjust the sound menu

(DSPL) Change the display item

SOUND

DSPL

MODE

SOUND

DSPL

MODE

OFF

Rotate the VOL control

to adjust the volume.

(SOURCE)

(SOUND)

(ATT)

(DSPL)

(OFF)

(MODE)

continue to next page t

SEEK/AMS

control

PRESET/DISC

control

14

Changing the operative direction

The operative direction of controls is factory-set

as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SOUND) for 2 seconds while

pushing the VOL control.

Tip

You can also change the operative direction of these

controls with the unit (page 15).

Adjusting the sound

characteristics

You can adjust the bass, treble, balance and fader.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

Each time you press (SOUND), the item

changes as follows:

BAS (bass) t TRE (treble) t

BAL (left-right) t FAD (front-rear)

2 Adjust the selected item by pressing

either side of (SEEK).

When adjusting with the rotary commander,

press (SOUND) and rotate the VOL control.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the

sound

(With the rotary commander or the card

remote commander)

Press (ATT) on the rotary commander

or card remote commander.

After “ATT-ON” momentarily appears,

“ATT” appears in the display.

To restore the previous volume level, press

(ATT) again.

To increase

To decrease

15

Changing the sound and

display settings

— Menu

The following items can be set:

SET (Set Up)

• CLOCK (page 8)

• BEEP — to turn the beeps on or off.

• RM (Rotary Commander) — to change the

operative direction of the controls of the rotary

commander.

– Select “NORM” to use the rotary commander

at the factory-set position.

– Select “REV” when you mount the rotary

commander on the right side of the steering

column.

DSPL (Display)

• D.INFO (Dual Information) — to display the

clock and the play mode at the same time (ON).

• M.DSPL (Motion Display) — to select the

Motion Display mode from “1,” “2,” and

“OFF.”

– Select “1” to show decoration patterns in the

display and activate Demo display.

– Select “2” to show decoration patterns in the

display and deactivate Demo display.

– Select “OFF” to deactivate the Motion

Display.

• A.SCRL (Auto Scroll)*

– Select “ON” to scroll all automatically

displayed names exceeding 8 characters.

– When A.SCRL is set to off and the disc/track

name is changed, the disc/track name does

not scroll.

* When no CD or MD is playing, this item will not

appear.

P/M (Play Mode)

• LOCAL ON/OFF (Local seek mode) (page 10)

– Select “ON” to only tune into stations with

stronger signals.

• MONO ON/OFF (Monaural mode) (page 10)

– Select “ON” to hear FM stereo broadcast in

monaural. Select “OFF” to return to normal

mode.

• IF AUTO/WIDE (page 10)

SND (Sound)

• EQ7 TUNE (page 17) — to adjust the equalizer

curve.

• LOUD (Loudness) — to enjoy bass and treble

even at low volumes. The bass and treble will

be reinforced.

1 Press (MENU).

To set A.SCRL, press (MENU) during CD/

MD playback.

2 Press either side of (DISC/PRESET)

repeatedly until the desired item

appears.

3 Press the (+) side of (SEEK) to select

the desired setting (Example: “ON” or

“OFF”).

4 Press (ENTER).

After the mode setting is completed, the

display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“SET,”

“DSPL,” “P/M,” “SND,” and “EDIT”) by pressing either

side of (DISC/PRESET) for 2 seconds.

16

Selecting the sound position

— My Best sound Position (MBP)

When you drive without passengers, you can

enjoy the most comfortable sound environment

with “My Best sound Position.”

“My Best sound Position” has two presets, which

are best suited for the front seats. You can select

one very easily with the MBP button.

MBP-A: best suited for the person in the front-

left seat.

MBP-B: best suited for the person in the front-

right seat.

Press (MBP) repeatedly for the desired

listening position.

After 1 second, the display goes back to the

normal playback mode.

To cancel the MBP function, select “MBP-OFF.”

If you want to adjust the sound characteristics

more precisely, you can do it using the

(SOUND) button (see “Adjusting the sound

characteristics” on page 14).

Notes

• If you adjust any sound characteristics by using the

(SOUND) button (page 14), the MBP setting returns

to OFF.

• When MBP is set to OFF, the sound setting you

adjusted (page 14) is activated.

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music

types (XPLOD, VOCAL, CLUB, JAZZ, NEW

AGE, ROCK, CUSTOM, and OFF (equalizer

OFF)).

You can store and adjust the equalizer settings

for frequency and level.

Selecting the equalizer curve

1 Press (SOURCE) to select a source

(radio, tape, CD, or MD).

2 Press (EQ7) repeatedly until the

desired equalizer curve.

Each time you press (EQ7), the item

changes.

To cancel the equalizing effect, select “OFF.”

After 3 seconds, the display returns to the

normal playback mode.

17

Adjusting the equalizer curve

1 Press (MENU).

2 Press either side of (DISC/PRESET)

repeatedly until “EQ7 TUNE” appears,

then press (ENTER).

3 Press either side of (SEEK) to select

the desired equalizer curve, then

press (ENTER).

Each time you press (SEEK), the item

changes.

4 Select the desired frequency and level.

1Press either side of (SEEK) to select

the desired frequency.

Each time you press (SEEK), the

frequency changes.

62 Hz y 157 Hz y 396 Hz y 1kHz

y 2.5kHz y 6.3kHz y 16kHz

2Press either side of (DISC/PRESET)

to adjust the desired volume level.

The volume level is adjustable in 1 dB

steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve,

press (ENTER) for 2 seconds.

5 Press (MENU) twice.

When the effect setting is complete, the

normal playback mode appears.

CD/MD Unit (optional)

This unit can control external CD/MD units

(optional).

If you connect an optional CD unit with the CD

TEXT function and the CUSTOM FILE

function, the CD TEXT information will appear

in the display when you play a CD TEXT disc.

If you connect MP3 playable CD units (eg. MP3

CD changer), you can play MP3 files;

compressed audio files with quality sound. See

“MP3 playable CD Unit (optional)” on page 20.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select

“CD” or “MD (MS*).”

2 Press (MODE) repeatedly until the

desired unit appears.

Playback starts.

* MS: MG Memory Stick System-up Player MGS-X1

Cautions when connecting MGS-X1 and MD

unit(s).

This unit recognizes MGS-X1 as an MD unit.

• When you want to play MGS-X1, press (SOURCE) to

select “MS” or “MD.” If “MS” appears in the source

display, MGS-X1 starts to play. If “MD” appears in

the source display, press (MODE) to select “MS,” to

start playback.

• When you want to play an MD unit, press (SOURCE)

to select “MD” or “MS.” If your desired MD unit

appears in the source display, it starts to play. If “MS”

or another MD unit appears in the source display,

press (MODE) to select your desired MD unit, to

start playback.

To Press

Skip discs

–Disc selection

(DISC/PRESET) (+/–)

18

Display items

When the disc/track changes, any prerecorded

title*

1

of the new disc/track is automatically

displayed (if the Auto Scroll function is set to

“ON,” names exceeding 8 characters will be

scrolled (page 15)).

*1 When pressing (DSPL), “NO NAME” indicates that

there is no Disc Memo (page 19) or prerecorded

name to display.

*2 Only for CD TEXT discs with the artist name.

Notes

• Some characters cannot be displayed. Characters

and signs which cannot be displayed appear as “ *.”

• For some CD TEXT discs with very many

characters, information may not scroll.

• This unit cannot display the artist name for each

track of a CD TEXT disc.

Tip

When A.SCRL (Auto Scroll) is set to OFF and the disc/

track name is changed, the disc/track name does not

scroll.

Playing tracks repeatedly

— Repeat Play

The disc in the main unit will repeat a track or

the entire disc when it reaches the end. For repeat

play, you can select:

• REP-TRACK — to repeat a track.

• REP-DISC* — to repeat a disc.

* Available only when one or more optional CD/MD

units are connected.

During playback, press (1) on the

card remote commander repeatedly

until the desired setting appears in the

display.

Repeat Play starts.

To return to normal play mode, select “REP-

OFF.”

Playing tracks in random

order

— Shuffle Play

You can select:

• SHUF-DISC — to play the tracks on the

current disc in random order.

• SHUF-CHGR*

1

— to play the tracks in the

current optional CD (MD) unit in random

order.

• SHUF-ALL*

2

— to play all the tracks in all the

connected CD (MD) units in random order.

*1 Available only when one or more optional CD (MD)

units are connected.

*2 Available only when two or more optional CD units,

or two or more optional MD units are connected.

During playback, press (2) on the

card remote commander repeatedly

until the desired setting appears in the

display.

Shuffle Play starts.

To return to normal play mode, select “SHUF-

OFF.”

Note

“SHUF-ALL” will not shuffle tracks between CD units

and MD units.

To Press

Switch display

item

(DSPL)

Scroll display item (SCRL)

Displayable items

• Track number/ Elapsed playing

time

• Disc name*

1

/artist name*

2

• Track title*

1

Disc number

Displayable items

• Music Source

•Clock

•Function

19

Labeling a CD

— Disc Memo (For a CD unit with the

CUSTOM FILE function)

You can label each disc with a custom name

(Disc Memo). You can enter up to 8 characters

for a disc. If you label a CD, you can locate the

disc by name (page 20).

1 Start playing the disc you want to label

in a CD unit with the CUSTOM FILE

function.

2 Press (MENU), then press either side

of (DISC/PRESET) repeatedly until

“NAMEEDIT” appears.

3 Press (ENTER).

The unit will repeat the disc during the

labeling procedure.

4 Enter the characters.

1Press the (+)*

1

side of

(DISC/PRESET) repeatedly to select

the desired character.

A t B t C ... t 0 t 1 t 2 ... t +

t – t

*

... t _*

2

t A

*1 For reverse order, press the (–) side of

(DISC/PRESET).

*2 (blank space)

2Press the (+) side of (SEEK) after

locating the desired character.

If you press the (–) side of (SEEK), you

can move back to the left.

3Repeat steps 1 and 2 to enter the

entire name.

5 To return to normal CD play mode,

press (ENTER).

Tips

• Simply overwrite or enter “

_” to correct or erase a

name.

• There is another way to start labeling a CD: Press

(LIST) for 2 seconds instead of performing steps 2

and 3. You can also complete the operation by

pressing (LIST) for 2 seconds instead of step 5.

• You can label CDs on a unit without the CUSTOM

FILE function if that unit is connected along with a

CD unit that has the function. The Disc Memo will be

stored in the memory of the CD unit with the

CUSTOM FILE function.

Note

REP-TRACK/shuffle play is suspended until the Name

Edit is complete.

Viewing the Disc Memo

As a display item, the Disc Memo always takes

priority over any original CD TEXT information.

Tip

To find out about other items that can be displayed,

see page 18.

Erasing the Disc Memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the

CD unit storing the Disc Memo.

3 Press (MENU), then press either side

of (DISC/PRESET) repeatedly until

“NAME DEL” appears.

4 Press (ENTER).

The stored names will appear.

5 Press either side of (DISC/PRESET)

repeatedly to select the disc name you

want to erase.

The stored names will appear.

6 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

The unit returns to normal CD play mode.

Notes

• When the Disc Memo for a CD TEXT disc is erased,

the original CD TEXT information is displayed.

• If you cannot find the Disc Memo you want to erase,

try selecting a different CD unit in step 2.

To Press

View (DSPL) during CD/CD

TEXT disc playback

20

Locating a disc by name

— List-up (For a CD unit with the CD TEXT/

CUSTOM FILE function, or an MD unit)

You can use this function for discs that have been

assigned custom names*

1

or for CD TEXT

discs*

2

.

*1 Locating a disc by its custom name: when you

assign a name for a CD (page 19) or an MD.

*2 Locating discs by the CD TEXT information: when

you play a CD TEXT disc on a CD unit with the CD

TEXT function.

1 Press (LIST).

The name assigned to the current disc appears

in the display.

2 Press either side of (DISC/PRESET)

repeatedly until you find the desired

disc.

3 Press (ENTER) to play the disc.

Note

Some letters cannot be displayed (exception: Disc

Memo).

MP3 playable CD Unit

(optional)

This unit can control external MP3 playable CD

units with the CUSTOM FILE functions.

If you connect the optional MP3 playable CD

units, you can play discs containing MP3 files

and use the CUSTOM FILE functions (page 19,

20).

Listening to an MP3 file

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly until the

appropriate indication for the MP3

playable CD unit (“CD1,” “CD2,” etc.)

appears.

Playback starts.

When the last file on the disc is over

The file number indication returns to “1,” and

playback restarts from the first file of the disc.

Notes

• If a disc with no MP3 files (tracks) is inserted, “CD”

appears in the disc type display to start playback but

there will be no sound.

• Before playing a track, this unit reads all track and

album information on the disc. Depending on the

track structure, it may take more than a minute

before play begins. During this time, “READ” is

displayed. Please wait for play to start automatically

when the reading is complete.

To Press

Stop playback (OFF)

Eject the disc (OPEN) then Z

Skip tracks

–Automatic

Music Sensor

(SEEK) (./>)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK) (m/M)

[hold to desired point]

Skip discs

–Disc selection

(DISC/PRESET) (+/–)

[once for each disc]

Skip albums

–Album selection

(DISC/PRESET) (+/–)

[hold to desired point]

La page est en cours de chargement...

Sony XR-CA630X Manuel utilisateur

Sony XR-CA630X Manuel utilisateur

dans d''autres langues

Documents connexes