Sony KE-P42M1 Le manuel du propriétaire

Quick Start Guide

Operating Instructions

Anleitung zur schnellen Inbetriebnahme

Bedienungsanleitung

Guide de mise en route

Mode d’emploi

Beknopte gebruiksgids

Gebruiksaanwijzing

Before operating the TV, please read the “Safety Information” section of this manual.

Retain this manual for future reference.

Lesen Sie vor der Inbetriebnahme des Fernsehgeräts bitte den Abschnitt

„Sicherheitsinformationen“ in dieser Anleitung. Bewahren Sie die Anleitung zum

späteren Nachschlagen auf.

Avant d’utiliser le téléviseur, lisez la section « Consignes de sécurité » de ce mode

d’emploi. Conservez ce mode d’emploi pour vous y référer ultérieurement.

Lees het hoofdstuk "Veiligheidsinformatie" van deze gebruiksaanwijzing alvorens de TV

in gebruik te nemen. Bewaar deze gebruiksaanwijzing zodat u ze achteraf nog kunt

raadplegen.

2-021-809-14(1)

KLV-L32M1

KE-P42M1

 2004 Sony Corporation

GB

DE

FR

NL

LCD Colour TV/PDP Colour TV KLV-L32M1/KE-P42M1

LCD Colour TV

PDP Colour TV

Quick Start Guide

Operating Instructions

GB

1

2

NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM

A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e. marked with

or ) must be used.

When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5

AMP FUSE at the distribution board.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse.

Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse.

IMPORTANT

If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in

accordance with the following instructions:

The wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow Earth

Blue Neutral

Brown Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by

the safety earth symbol I or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the

terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal

which is marked with the letter L or coloured red.

WARNING

• To prevent the risk of electric shock, do not insert the plug cut off from the mains lead into a socket outlet. This plug cannot be

used and should be destroyed.

• To prevent the risk of fire or electric shock, do not expose the unit to rain or moisture.

• Dangerously high voltages are present inside the unit. Do not open the cabinet. Refer servicing to qualified personnel only.

Introduction

Thank you for choosing this Sony LCD/PDP Colour Television.

Before operating the TV, please read this manual thoroughly and retain it for future reference.

Symbols used in the manual

The illustrations used in this manual are of the KLV-L32M1 unless otherwise stated.

FUSE

........Important information.

........Information on a feature.

1

, 2.......... Sequence of instructions.

......Shaded buttons on the remote control show you the

buttons you have to press to follow the sequence of

instructions.

.........Informs you of the result of instructions followed.

3

Table of Contents

GB

Table of Contents

Quick Start Guide ......................................................................................................................................4

Operating Instructions .......................................................................................................13

Safety Information ...............................................................13

Precautions ...........................................................................18

Overview

Overview of the TV Buttons and Indicators ........................21

Overview of the Remote Control Buttons ...........................23

Installation

Inserting Batteries into the Remote Control ........................25

Connecting an Aerial and a VCR ........................................26

Preventing the TV from Falling Down ................................29

First Time Operation

Switching On the TV and Tuning the TV Automatically ...30

Menu System

Introducing and Using the Menu System ............................32

Picture Adjustment ..............................................................33

Sound Adjustment ...............................................................34

Screen Control .....................................................................36

Features ................................................................................38

Set Up ..................................................................................40

Other Functions

Sleep Timer Function ...........................................................44

Picture Off Function (KE-P42M1 only) ..............................44

Screen Memo Function ........................................................45

Teletext ................................................................................46

NexTView ............................................................................47

Additional Information

Connecting Optional Equipment .........................................50

Using Optional Equipment ..................................................57

Remote Control Configuration for VCR/DVD ....................58

Specifications .......................................................................60

Troubleshooting ...................................................................61

Television Channel Number Guide

for the United Kingdom ................................................64

4

Quick Start Guide

Thank you for purchasing this Sony product.

After following this step by step guide you will be able to:

– Insert batteries into the remote control.

– Connect an aerial, VCR, and mains lead to your TV.

– Select the language of the menu screens.

– Select the country/region in which you want to operate your TV.

– Tune your TV.

– Change the broadcast channels into a different order.

Quick Start Guide

1

Checking the Accessories Supplied

Remote Control

RM-Y1102 (KLV-L32M1) (1) or

RM-Y1002 (KE-P42M1) (1):

Size AA Batteries

(R6 Type) (2):

Coaxial Cable (1):

Mains Lead

(Type

C-6

) (1):

KLV-L32M1

Use this mains lead if you use the

unit outside the United

Kingdom.

Mains Lead

(Type BF) (1):

KLV-L32M1

• Use this mains lead if you use

the unit in the United Kingdom.

• Refer to “NOTICE FOR

CUSTOMERS IN THE

UNITED KINGDOM” on

page 2 when using this mains

lead.

• This mains lead may not be

supplied depending on the

country.

Do not remove ferrite cores.

KE-P42M1 KE-P42M1

Cleaning Cloth (KE-P42M1 only) (1)

Clamp screws (2)

Plug Holder

(KE-P42M1 only)

(1)

5

Quick Start Guide

GB

2

Inserting Batteries into the Remote Control

• Make sure you insert the supplied batteries observing the correct polarity.

• Always remember to dispose of used batteries in an environmentally friendly way.

• Do not use different types of batteries together or mix old and new batteries.

(continued)

6

Quick Start Guide

3

Connecting an Aerial, VCR, and Mains Lead to the

TV

• Use the supplied mains lead (Type C-6 or Type BF, see page 4).

• Use the supplied coaxial cable for aerial connection.

Do not connect to the mains before all connections are complete.

Connect the supplied

coaxial cable.

Connect the supplied mains

lead (Type C-6 or Type BF).

Connecting an aerial

KLV-L32M1

KE-P42M1

Connect the supplied

coaxial cable.

Connect the supplied mains

lead (Type C-6 or Type BF,

with safety earth).

7

Quick Start Guide

GB

• For more details regarding VCR connection, refer to “Connecting Optional Equipment” on page 50.

• Note that some Scart leads may not fit into the connector on the TV.

OUT IN

3

(SMARTLINK)

/

VCR

Connecting a VCR with an aerial

KLV-L32M1

3

(SMARTLINK)

/

OUT IN

VCR

Scart lead is optional.

Connect the supplied

mains lead (Type C-6

or Type BF, with safety

earth).

KE-P42M1

Connect the supplied

mains lead (Type C-6

or Type BF).

Scart lead is optional.

(continued)

8

Quick Start Guide

You can store the cables in the back of the TV.

You must secure the mains plug to the TV’s AC IN jack.

4

Bundling the Cables (KLV-L32M1 only)

Bundle the mains lead and the coaxial cable and secure them with

the clips on the TV.

When you install the coaxial cable, loop it as shown in the

illustration.

4

Securing the mains plug (KE-P42M1 only)

1 Attach the mains plug holder (supplied) to the mains lead.

2 Clip on the AC IN jack until you hear a click.

To unplug the mains lead pull down the plug holder while

pushing on both sides of the holder, then pull out the plug.

Clips

AC IN (power supply

input) jack of the TV

Plug holder

(supplied)

Mains lead

(supplied)

9

Quick Start Guide

GB

5

Switching On the TV

1 Connect the TV to the mains (220–240 V AC, 50 Hz).

2 Press the (Power) switch on the TV to switch it on.

(continued)

10

Quick Start Guide

This TV works with menu screens. By following the instructions below, you can select the desired language of the menu screens,

and the country/region in which you want to operate the TV.

The first time you switch on the TV, the Language menu appears

automatically on the screen (Auto Startup).

1 Press / / or on the remote control to select the

language, then press OK to confirm your selection.

From now on, all the menus will appear in the selected language.

2 The Country menu appears automatically on the screen.

Press or to select the country/region in which you will

operate the TV, then press OK to confirm your selection.

The Auto Tuning menu appears automatically on the screen.

To perform Auto Startup later, press 0 on the rear panel of the TV.

6

Selecting the Language of the Menu Screens and

the Country/Region

If the country/region in which you want to use the TV does

not appear in the list, select “–” instead of a country/region.

Country

Select Country

–

United Kingdom

Ireland

Nederland

België/Belgique

Luxembourg

France

Italia

Schweiz/Suisse/Svizzera

Deutschland

Österreich

Do you want to start

automatic tuning ?

Ye s No

Language

Select Language

English

Nederlands

Français

Italiano

Deutsch

Türkçe

Ελληνικά

Español

Português

Polski

Česky

Magyar

Русский

Бьлгарски

Suomi

Dansk

Svenska

Norsk

m

23

(SMARTLINK)

/

CENTRE SPEAKER

IN

180W (6 ) MAX

R/D/D/D

R/D/

D/D

L/G/

S/I

L/G/S/I

P

R

/

C

R

P

B

/

C

B

Y

KLV-L32M1

KE-P42M1

11

Quick Start Guide

GB

You must tune the TV to receive channels (TV Broadcast). If you follow the instructions below, the TV automatically searches and

stores all available broadcast channels.

1 Press OK to select Yes.

2 The TV starts searching and storing all available broadcast

channels.

When the auto tuning is finished, the Programme Sorting menu

appears automatically on the screen.

7

Tuning the TV Automatically

• This procedure could take some minutes. Please be

patient and do not press any buttons, otherwise the auto

tuning will not be completed properly.

• If no channels are found during the auto tuning process, a

new menu appears automatically on the screen asking

you to connect the aerial. Please connect the aerial (see

page 6) and press OK. The auto tuning process will start

again.

Do you want to start

automatic tuning ?

Ye s No

Auto Tuning

Programme :

System :

Channel :

Searching...

01

I

C23

m

Programme Sorting

Select Channel

01

02

03

04

05

06

07

08

09

10

11

TVE

TVE2

TV3

C33

C27

C58

S02

S06

S08

S12

S14

Exit:

MENU

(continued)(continued)

12

Quick Start Guide

By following the instructions below, you can rearrange the order in which the broadcast channels appear on the screen.

8

Changing the Programme Order of the Broadcast

Channels

A) If you want to keep the broadcast channels in the tuned order

B) If you want to store the broadcast channels in a different order

Your TV is now ready for use.

Press MENU to exit and return to the normal TV screen.

Programme Sorting

Select Channel

01

02

03

04

05

06

07

08

09

10

11

TVE

TVE2

TV3

C33

C27

C58

S02

S06

S08

S12

S14

Exit:

MENU

1 Press or to select the programme number with the channel

you want to rearrange, then press .

2 Press or to select the new programme number position for

your selected channel, then press .

3 Repeat steps 1 and 2 if you want to change the order of the other

channels.

4 Press MENU to exit and return to the normal TV screen.

The selected channel now moves to its new programme position

and the other channels move accordingly.

Programme Sorting

Select Channel

01

02

03

04

05

06

07

08

09

10

11

TVE

TVE2

TV3

C33

C27

C58

S02

S06

S08

S12

S14

Exit:

MENU

Programme Sorting

Select new position

01 TVE

TVE

TVE2

TV3

C33

C27

C58

S02

S06

S08

S12

S14

01

02

03

04

05

06

07

08

09

10

11

Exit:

MENU

m

13

Safety Information

GB

Safety Information

For Safety

Operating Instructions

Mains lead

Unplug the mains lead when

moving the unit. Do not

move the unit with the mains

lead plugged in. It may

damage the mains lead and

result in fire or electric

shock. If the unit has been

dropped or damaged, have it

checked immediately by qualified service personnel.

Medical institutions

Do not place this unit in a place where

medical equipment is in use. It may

cause malfunction of medical

instruments.

Installation

Installation of the unit on the wall

should be carried out by qualified

servicemen. Improper installation may

render the unit unsafe.

Carrying

• Before carrying the unit, disconnect all

the cables from the unit.

• When you carry the unit by hand, hold the

unit as illustrated on the right. As the rear

cover comes off easily, the unit may fall

and be damaged or cause serious injury.

• When transporting it, do not subject the unit to shocks or

excessive vibration. The unit may fall and be damaged or cause

serious injury.

• When you carry the unit in for repair or when you move it, pack

it using the original carton and packing material.

• Carrying the unit requires two or more people.

(continued)

14

Safety Information

Installation and Moving

Ventilation

Never cover the ventilation holes in the

cabinet. It may cause overheating and

result in fire. Unless proper ventilation is

provided, the unit may gather dust and get

dirty. For proper ventilation, observe the

following:

• Do not install the unit turned backwards or sideways.

• Do not install the unit turned over or upside down.

• Do not install the unit on a shelf or in a closet.

• Do not place the unit on a rug or bed.

• Do not cover the unit with cloth, such as curtains, or items such

as newspapers, etc.

Outdoor use

Do not install this unit outdoors. If the

unit is exposed to rain, it may result in

fire or electric shock. If the unit is

exposed to direct sunlight, the unit may

heat up and this may result in damage to

the unit.

Vehicle or ceiling

Do not install this unit in a vehicle. The

motion of the vehicle may cause the

unit to fall down and cause injury. Do

not hang this unit from the ceiling.

Ships and other vessels

Do not install this unit on a ship or

other vessel. If the unit is exposed to

seawater, it may cause fire or damage

the unit.

Water and moisture

Do not use this unit near water – for

example, near a bathtub or shower room.

Also do not expose to rain, moisture or

smoke. This may result in fire or electric

shock. Do not use this unit where insects may enter.

To prevent the unit from falling

Place the unit on a secure, stable stand. Do not

hang anything on the unit. If you do, the unit may

fall from the stand or wall-mount bracket, causing

damage or serious injury.

Do not allow children to climb on the unit.

Optional accessories

Observe the following when installing the unit

using a stand or wall-mount bracket. If you do not

do so, the unit may fall and cause serious injury.

• Be sure to follow the instructions supplied

with your stand or wall-mount bracket when installing the unit.

• Be sure to attach the brackets supplied with your stand.

15

Safety Information

GB

Power Sources

Use

Overloading

This unit is designed to operate on a 220–

240 V AC supply only. Take care not to

connect too many appliances to the same

mains socket as this could result in fire or

electric shock.

Mains lead protection

Pull out the mains lead by the plug. Do

not pull on the mains lead itself.

Mains

Do not use a poor fitting mains socket. Insert the

plug fully into the mains. If it is loose, it may cause

arcing and result in fire. Contact your electrician to

have the mains socket changed.

Wiring

Unplug the mains lead when wiring cables. Be sure to unplug the

mains lead for your safety, when hooking up.

Moisture

Do not touch the mains lead with a wet hand.

If you plug/unplug the mains lead with a wet

hand, it may cause electric shock.

Cleaning

Clean the mains plug regularly. If the plug is

covered with dust and it picks up moisture, its

insulation may deteriorate and result in fire.

Unplug the mains plug and clean it regularly.

Lightning storms

For your own safety, do not touch any

part of the unit, mains lead, or aerial lead

during lightning storms.

Damage requiring service

If the surface of the unit cracks, do not touch it until you have

unplugged the mains lead. Otherwise electric shock may result.

Ventilation holes

Do not insert anything in the ventilation holes. If

metal or something flammable is inserted in

these holes, it may result in fire or electric shock.

Servicing

Do not open the cabinet. Entrust the

unit to qualified service personnel

only.

Moisture and flammable objects

• Do not let this unit get wet. Never

spill liquid of any kind on the

unit. If any liquid or solid object

does fall through openings in the

cabinet, do not operate the unit. It

may result in electric shock or damage to the unit.

Have it checked immediately by qualified service personnel.

• To prevent fire, keep flammable objects or naked lights (e.g.

candles) away from the unit.

(continued)

16

Safety Information

Additional Safety Information

Electric shock

Do not touch the unit with wet hands. Doing so may cause electric

shock or damage the unit.

Broken glass

Do not throw anything at the unit. The screen

glass may explode by the impact and cause

serious injury.

Protruding location

Do not install the unit in locations where it may protrude. If you

install the unit in the following locations, it may result in injury.

• Do not install the unit in a location where the unit protrudes, such

as on or behind a pillar.

• Do not install the unit in a location where you might bump your

head on it.

Oils

Do not install this unit in restaurants that use oil. Dust absorbing oil

may enter the unit and damage the unit.

Placement

Never place the unit in hot, humid or

excessively dusty places. Do not install the

unit where insects may enter. Do not install

the unit where it may be exposed to

mechanical vibration.

Corrosion

If you use this unit near the seashore, salt may corrode metal parts

of the unit and cause internal damage or fire. It may also shorten the

life of the unit. Steps should be taken to reduce the humidity and

temperature of the area where the unit is located.

Accessories

Secure the unit properly.

If the unit is not secured properly, it may fall and cause injury. Take

measures to prevent this by using a stand or other apparatus on the

floor or wall in the specified manner, referring to the operating

instructions supplied with your stand.

Cleaning

Unplug the mains lead when cleaning this unit. If you do not do so,

it may result in electric shock.

Disposal of the unit (KLV-L32M1 only)

• Do not dispose of the unit with general household waste.

• The LCD contains a small amount of liquid crystal and mercury.

The fluorescent tube used in this unit also contains mercury.

Follow your local ordinances and regulations for disposal.

Recommended place for the unit

Place the unit on a stable, level surface.

Otherwise, the unit may fall and cause injury.

17

Safety Information

GB

LCD Screen (KLV-L32M1 only)

• Although the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are effective, black

dots may appear or bright points of light (red, blue, or green)

may appear constantly on the LCD screen. This is a structural

property of the LCD panel and is not a malfunction.

• Do not expose the LCD screen surface to the sun. Doing so may

damage the screen surface.

• Do not push or scratch the front filter, or place objects on top of

this unit. The image may be uneven or the LCD panel may be

damaged.

• If this unit is used in a cold place, a smear may occur in the

picture or the picture may become dark.

This does not indicate a failure. These phenomena disappear as

the temperature rises.

• Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this unit is in use. This is

not a malfunction.

Mains lead

If you damage the mains lead, it may

result in fire or electric shock.

• Do not pinch, bend, or twist the mains

lead excessively. The core lines may

be exposed or cut, causing a short-

circuit which may induce fire or

electric shock.

• Do not convert or damage the mains

lead.

• Do not put anything heavy on the

mains lead. Do not pull the mains

lead.

• Keep the mains lead away from heat sources.

• Be sure to grasp the plug when disconnecting the mains lead.

If the mains lead is damaged, stop using it and ask your dealer or

Sony service centre to exchange it.

Fluorescent lamp (KLV-L32M1 only)

This unit uses a special fluorescent lamp as its light source. If the

screen image becomes dark, flickers, or does not appear, the

fluorescent lamp has run down and should be replaced. For

replacement, consult qualified service personnel.

When not in use

For environmental and safety

reasons, it is recommended that the

unit be switched off when not in

use – not left in standby mode.

Disconnect it from the mains.

Heat

Do not touch the surface of the unit. It remains hot, even after the

unit has been turned off for some time.

Cable wiring

Take care not to catch your feet on the cables. It may damage the

unit.

Cleaning the screen surface

The screen surface is finished with a special coating to prevent

strong light reflections. Be sure to observe the following

precautions to avoid damaging the finish.

• To remove dust from the screen surface, wipe gently with a soft

cloth. If dust is persistent, wipe with a soft cloth slightly

moistened with a diluted mild detergent solution. You can wash

and repeatedly use the soft cloth.

• Never use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or strong solvent such as alcohol, benzine or

thinner.

Installation

Do not install optional components too close to the unit. Keep

optional components at least 30 cm away from the unit. If a VCR is

installed in front of the unit or beside the unit, the picture may

become distorted.

18

Precautions

Precautions concerning ventilation

Leave space around the unit. Otherwise, adequate air-circulation may be blocked causing overheating, which may cause fire or

damage to the unit.

When installing the unit on the wall

When installing the unit using a stand

Never install the unit as follows:

Leave at least this much space.

10 cm

30 cm

10 cm

Leave at least this much space.

10 cm

30 cm

10 cm

Air circulation is blocked.

Wall

La page est en cours de chargement...

Sony KE-P42M1 Le manuel du propriétaire

Ce manuel convient également à

Sony KE-P42M1 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents