Panasonic TX50MXT966 Guide de démarrage rapide

Operating Instructions

LED TV

Series

TX-43MX*96*

TX-50MX*96*

(image: TX-50MX*96*)

For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions).

≥

≥ [Main Menu] [Help] [eHELP]

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before operating this product and retain them for future reference.

Please carefully read the “Safety Precautions” of this manual before use.

The images shown in this manual are for illustrative purposes only.

Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.

F0123HN0 English

OIB_1

xxxxxxxx

Printed in China

English

Deutsch

Italiano

Français

Nederlands

Русский

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 1 ページ２０２３年１月１３日　金曜日　午後３時１８分

72-MXF967-X81Z1

2English

Contents

Be Sure to Read

Important Notice ·················································· 3

Safety Precautions ·············································· 4

Installing the wall-hanging bracket ·························· 8

Connections ······················································· 8

Identifying Controls ·············································10

First time Auto Setup ···········································12

FAQs ·······························································13

Maintenance ······················································14

Specifications ····················································15

The terms HDMI, HDMI High-Definition Multimedia

Interface, HDMI Trade Dress and the HDMI Logos are

trademarks or registered trademarks of HDMI Licensing

Administrator, Inc.

Dolby, Dolby Vision, Dolby Vision IQ, Dolby Atmos,

Dolby Audio, and the double-D symbol are trademarks of

Dolby Laboratories Licensing Corporation.

Manufactured under license from Dolby Laboratories.

Confidential unpublished works.

WPA3™, WPA2™, WPA™ are trademarks of Wi-Fi

Alliance®.

The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Panasonic Holdings Corporation is under

license.

DVB and the DVB logos are trademarks of the DVB

Project.

x.v.Colour™ is a trademark.

DiSEqC™ is a trademark of EUTELSAT.

Model No.

TX-43MXT966

TX-50MXT966

TX-43MXN968

TX-50MXN968

TX-43MXF967

TX-50MXF967

TX-43MXX969

TX-50MXX969

≥Refer to the separate sheet for information about

how to install the TV.

≥Illustrations shown may be different depending on

the model.

YouTube and the YouTube logo are trademarks of

Google LLC.

Amazon, Prime Video, Alexa and all related logos are

trademarks of Amazon.com, Inc. or its affiliates.

This product complies with the UHD Alliance Technical

Specification: UHDA Specified Reference Mode, Version

1.0. FILMMAKER MODE™ logo is a trademark of the

UHD Alliance, Inc. in the United States and other

countries.

AMD, the AMD Arrow logo, FreeSync and combinations

thereof are trademarks of Advanced Micro Devices, Inc.

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 2 ページ２０２３年１月１３日　金曜日　午後３時１８分

3

English

Important Notice

Notice for DVB / Data broadcasting / IPTV

functions

≥This TV is designed to meet the standards (as of April,

2023) of DVB-T / T2 (MPEG2, MPEG4-AVC(H.264)

and MPEG HEVC(H.265)) digital terrestrial services,

DVB-C (MPEG2, MPEG4-AVC(H.264) and MPEG

HEVC(H.265)) digital cable services and DVB-S

(MPEG2, MPEG4-AVC(H.264) and MPEG

HEVC(H.265)) digital satellite services.

Consult your local dealer for availability of DVB-T / T2

or DVB-S services in your area.

Consult your cable service provider for availability of

DVB-C services with this TV.

≥This TV may not work correctly with the signal which

does not meet the standards of DVB-T / T2, DVB-C or

DVB-S.

≥Not all the features are available depending on the

country, area, broadcaster, service provider, satellite

and network environment.

≥Not all CI modules work properly with this TV. Consult

your service provider about the available CI module.

≥This TV may not work correctly with CI module that is

not approved by the service provider.

≥Additional fees may be charged depending on the

service provider.

≥Compatibility with future services is not guaranteed.

Internet apps, voice control function are provided by their

respective service providers, and may be changed,

interrupted, or discontinued at any time.

Panasonic assumes no responsibility and makes no

warranty for the availability or the continuity of the

services.

Panasonic does not guarantee operation and

performance of peripheral devices made by other

manufacturers; and we disclaim any liability or damage

arising from operation and/or performance from usage of

such other maker’s peripheral devices.

Damages

≥Excepting cases where responsibility is recognised by

local regulations, Panasonic accepts no responsibility

for malfunctions caused by misuse or use of the

product, and other problems or damages caused by

use of this product.

≥Panasonic accepts no responsibility for the loss, etc.,

of data caused by disasters.

≥External devices separately prepared by the customer

are not covered by the warranty. Care for the data

stored in such devices is the responsibility of the

customer. Panasonic accepts no responsibility for

abuse of this data.

Handling of customer information

Certain customer information such as IP address of your

device (this TV)’s network interface will be collected as

soon as you connect your Panasonic-branded smart

television (this TV) or other devices to the internet

(excerpted from our privacy policy). We do this to protect

our customers and the integrity of our Service as well as

to protect the rights or property of Panasonic.

When using Internet connecting function of this TV, after

agreeing (in the jurisdictions where customer’s consent is

required to collect personal information under applicable

privacy laws) to or reviewing Panasonic’s terms of

service / privacy policy (hereinafter referred to as terms

and conditions etc.), customer information on the use of

this unit may be collected and used according to terms

and conditions etc.

For details of terms of service / privacy policy, refer to

[eHELP] (Search by Purpose > Network > Network

settings > Terms of Service and Settings).

Customer’s personal information may be recorded on

this TV by broadcasting organization or application

provider. Before repairing, transferring or discarding this

TV, erase all the information recorded on this TV

according to the following procedure.

[Shipping Condition] in [System Menu] ([Setup] menu)

Customer information may be collected by provider via

application provided by third parties on this TV or

website. Please confirm the terms and conditions etc. of

provider in advance.

• Panasonic will not be held responsible for collecting or

using customer information via application provided by

third party on this TV or website.

• When entering your credit card number, name, etc.,

pay special attention to the trustworthiness of the

provider.

• Registered information may be registered in the server

etc. of provider. Before repairing, transferring or

discarding this TV, be sure to erase the information

according to the terms and conditions etc. of provider.

The recording and playback of content on this or any

other device may require permission from the owner of

the copyright or other such rights in that content.

Panasonic has no authority to and does not grant you

that permission and explicitly disclaims any right, ability

or intention to obtain such permission on your behalf. It is

your responsibility to ensure that your use of this or any

other device complies with applicable copyright

legislation in your country. Please refer to that legislation

for more information on the relevant laws and regulations

involved or contact the owner of the rights in the content

you wish to record or playback.

This product is licensed under the AVC patent portfolio

license for the personal use of a consumer or other uses

in which it does not receive remuneration to (i) encode

video in compliance with the AVC Standard (“AVC

Video”) and/or (ii) decode AVC Video that was encoded

by a consumer engaged in a personal activity and/or was

obtained from a video provider licensed to provide AVC

Video. No license is granted or shall be implied for any

other use.

Additional information may be obtained from MPEG LA,

L.L.C.

See http://www.mpegla.com.

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 3 ページ２０２３年１月１３日　金曜日　午後３時１８分

4English

This mark indicates the product operates on

AC voltage.

This mark indicates the product operates on

DC voltage.

This mark indicates a Class II or double

insulated electrical appliance wherein the

product does not require a safety connection to

electrical earth (ground).

Transport only in upright position.

Safety Precautions

To help avoid risk of electrical shock, fire, damage or

injury, please follow the warnings and cautions below:

∫Mains plug and lead

≥This TV is designed to operate on AC 220-240 V,

50 / 60 Hz.

≥Insert the mains plug fully into the mains socket.

≥When disconnecting the mains lead, be absolutely

sure to disconnect the mains plug from the mains

socket first.

≥To turn Off the apparatus completely, you must pull

the mains plug out of the mains socket.

Consequently, the mains plug should be easily

accessible at all times.

≥Disconnect the mains plug when cleaning the TV.

≥Do not damage the mains lead.

• Do not move the TV with the lead plugged into a

mains socket.

• Do not twist the lead, bend it excessively or stretch

it.

• Do not use a damaged mains plug or mains socket.

• Ensure the TV does not crush the mains lead.

≥Do not use any mains lead other than that provided

with this TV.

If you detect anything unusual, immediately remove the

mains plug.

≥Mains plug type may vary depending on the country.

≥Do not touch the mains plug with wet

hands.

• Do not place a heavy

object on the lead.

• Do not place the lead near

a high temperature object.

• Do not pull on the lead.

Hold onto the mains plug

body when disconnecting

the plug.

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 4 ページ２０２３年１月１３日　金曜日　午後３時１８分

5

English

∫Take care

≥Do not insert foreign objects into the TV through the

air vents.

≥If the TV is used in an area where insects may easily

enter the TV.

It is possible for insects to enter the TV, such as small

flies, spiders, ants, etc. which may cause damage to

the TV or become trapped in an area visible on the

TV, e.g. within the screen.

≥If the TV is used in an environment where there is dust

or smoke.

It is possible for dust/smoke particles to enter the TV

through the air vents during normal operation which

can become trapped inside the unit. This may cause

overheating, malfunction, deterioration in picture

quality, etc.

≥Do not use an unapproved pedestal / mounting

equipment. Be sure to ask your local Panasonic

dealer to perform the setup or installation of approved

wall-hanging brackets.

≥Do not apply any strong force or impact to the display

panel.

≥Ensure that children do not climb on the TV.

Warning Stability Hazard

A TV may fall, causing serious personal injury or death.

Many injuries, particularly to children, can be avoided by

taking simple precautions such as:

• ALWAYS use cabinets or stands or mounting methods

recommended by the manufacturer of the TV.

• ALWAYS use furniture that can safely support the TV.

• ALWAYS ensure the TV is not overhanging the edge

of the supporting furniture.

• ALWAYS educate children about the dangers of

climbing on furniture to reach the TV or its controls.

• ALWAYS route cords and cables connected to your

TV so they cannot be tripped over, pulled or grabbed.

• NEVER place a TV in an unstable location.

• NEVER place the TV on tall furniture (for example,

cupboards or bookcases) without anchoring both the

furniture and the TV to a suitable support.

• NEVER place the TV on cloth or other materials that

may be located between the TV and supporting

furniture.

• NEVER place items that might tempt children to climb,

such as toys and remote controls, on the top of the TV

or furniture on which the TV is placed.

If the existing TV is going to be retained and relocated,

the same considerations as above should be applied.

≥This TV is designed for table-top use.

∫Suffocation / Choking Hazard

≥The packaging of this product may cause suffocation,

and some of the parts are small and may present a

choking hazard to young children. Keep these parts

out of reach of young children.

∫Pedestal

≥Do not disassemble or modify the pedestal.

≥Do not use any pedestal other than the one provided

with this TV.

≥Do not use the pedestal if it becomes warped or

physically damaged. If this occurs, contact your

nearest Panasonic dealer immediately.

≥During setup, make sure that all screws are securely

tightened.

≥Ensure that the TV does not suffer any impact during

installation of the pedestal.

≥Ensure that children do not climb onto the pedestal.

≥Install or remove the TV from the pedestal with at least

two people.

≥Install or remove the TV according to the specified

procedure.

≥Insert the pedestal firmly, otherwise it may come off

when setting up the TV.

≥Do not remove covers and never

modify the TV yourself as live

parts are accessible and risk of

electric shock when they are

removed. There are no user

serviceable parts inside.

≥Do not expose the TV to rain or

excessive moisture. This TV

must not be exposed to

dripping or splashing water and

objects filled with liquid, such

as vases, must not be placed

on top of or above the TV.

≥Do not place the TV on sloping

or unstable surfaces, and

ensure that the TV does not

hang over the edge of the

base.

≥Do not expose the TV to direct

sunlight and other sources of

heat.

To prevent the spread of fire,

keep candles or other open

flames away from this product at

all times

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 5 ページ２０２３年１月１３日　金曜日　午後３時１８分

6English

∫Radio waves

≥Do not use the TV and the remote control in any

medical institutions or locations with medical

equipment. Radio waves may interfere with the

medical equipment and may cause accidents due to

malfunction.

≥Do not use the TV and the remote control near any

automatic control equipment such as automatic doors

or fire alarms. Radio waves may interfere with the

automatic control equipment and may cause

accidents due to malfunction.

≥Keep at least 15 cm away from the TV and the remote

control if you have a cardiac pacemaker. Radio waves

may interfere with the operation of the pacemaker.

≥Do not disassemble or alter the TV and the remote

control in any way.

∫Built-in wireless LAN

≥Do not use the built-in wireless LAN to connect to any

wireless network (SSID*) for which you do not have

usage rights. Such networks may be listed as a result

of searches. However, using them may be regarded

as illegal access.

≥Do not subject the built-in wireless LAN to high

temperatures, direct sunlight or moisture.

≥Data transmitted and received over radio waves may

be intercepted and monitored.

≥The built-in wireless LAN uses 2.4 GHz and 5 GHz

frequency bands. To avoid malfunctions or slow

response caused by radio wave interference when

using the built-in wireless LAN, keep the TV away

from other devices that use 2.4 GHz and 5 GHz

signals such as other wireless LAN devices,

microwave ovens, and mobile phones.

≥When problems occur due to static electricity, etc., the

TV might stop operating to protect itself. In this case,

turn off the TV by unplugging the mains plug, then turn

on by inserting the mains plug into the mains socket.

∫Bluetooth® wireless technology

≥The TV and the remote control use the 2.4 GHz radio

frequency ISM band (Bluetooth®). To avoid

malfunctions or slow response caused by radio wave

interference, keep the TV and the remote control away

from the devices such as other wireless LAN devices,

other Bluetooth® devices, microwaves, mobile phones

and the devices that use 2.4 GHz signal.

∫Ventilation

Allow sufficient space (at least 10 cm) around the TV in

order to help prevent excessive heat, which could lead to

early failure of some electronic components.

≥Whether you are using a pedestal or not, always

ensure the vents at the bottom of the TV are not

blocked and there is sufficient space to enable

adequate ventilation.

∫Moving the TV

Before moving the TV, disconnect all cables.

≥At least two people are required to move the TV to

prevent injury that may be caused by the tipping or

falling of TV.

≥The remote control signal receiver, etc., are on the

bottom of the TV, so do not apply shocks by allowing it

to hit the floor, etc.

≥Take out the pedestal and the TV from the packing

case and put the TV onto a work table with the screen

panel down on the clean and soft cloth (blanket, etc.).

• Use a flat and firm table bigger than the TV.

≥Make sure not to scratch or break the TV.

∫When not in use for a long time

This TV will still consume some power even in the Off

mode, as long as the mains plug is still connected to a

live mains socket.

≥Remove the mains plug from the wall socket when the

TV is not in use for a prolonged period of time.

∫Excessive volume

≥If you hear a drumming noise in your ears, turn down

the volume or temporarily stop using the headphones.

SSID is a name for identifying a particular wireless

network for transmission.

≥Ventilation should not be

impeded by covering the

ventilation openings with items

such as newspapers,

tablecloths and curtains.

≥Do not expose your ears to

excessive volume from the

headphones. Irreversible

damage can be caused.

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 6 ページ２０２３年１月１３日　金曜日　午後３時１８分

7

English

∫Battery for the Remote Control

≥Keep the batteries out of reach of children to prevent

swallowing.

Adverse physical effects can result if accidentally

swallowed. If you suspect a child has swallowed one,

seek medical attention immediately.

≥Incorrect installation may cause battery leakage,

corrosion and explosion.

≥Replace only with the same or equivalent type.

≥Do not mix old and new batteries.

≥Do not mix different battery types (such as alkaline

and manganese batteries).

≥Do not use rechargeable batteries (Ni-Cd, etc.).

≥Do not burn or break up batteries.

≥Do not expose batteries to excessive heat such as

sunshine, fire or the like.

≥Make sure you dispose of batteries correctly.

≥Remove the battery from the unit when not using for a

prolonged period of time to prevent battery leakage,

corrosion and explosion.

LED TV

EU Declaration of Conformity (DoC)

Austria, Belgium, Bulgaria, Czech Republic, Denmark,

Estonia, France, Germany, Iceland, Italy, Greece, Spain,

Cyprus, Latvia, Liechtenstein, Lithuania, Luxembourg,

Hungary, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovenia, Slovakia, Turkey, Finland, Sweden,

Switzerland, Croatia

Output power transmitted in the frequency bands

Hereby, Panasonic Entertainment & Communication

Co., Ltd. declares that this TV is in compliance with the

essential requirements and other relevant provisions of

the Directive 2014/53/EU.

If you want to get a copy of the original DoC of this TV,

please visit the following website:

https://www.ptc.panasonic.eu/compliance-documents

Authorized Representative in EU:

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Manufacturer:

Panasonic Entertainment & Communication Co., Ltd.

1-10-12 Yagumo-higashi-machi, Moriguchi City,

Osaka 570-0021, Japan

Assembled in the Republic of Poland

5.15 – 5.35 GHz band of wireless LAN is

restricted to indoor operation only in the

following countries.

Type of wireless Frequency band Output Power

(EIRP)

Wireless LAN

2412-2472 MHz < 20 dBm

5150-5250 MHz < 23 dBm

5250-5350 MHz < 23 dBm

5470-5725 MHz < 23 dBm

Bluetooth®2402-2480 MHz < 10 dBm

Disposal of Old Equipment and Batteries

Only for European Union and countries with

recycling systems

These symbols on the products,

packaging, and/or accompanying

documents mean that used electrical and

electronic products and batteries must not

be mixed with general household waste.

For proper treatment, recovery and

recycling of old products and used batteries, please

take them to applicable collection points in

accordance with your national legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential negative

effects on human health and the environment.

For more information about collection and recycling,

please contact your local authority.

Penalties may be applicable for incorrect disposal of

this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 7 ページ２０２３年１月１３日　金曜日　午後３時１８分

8English

Installing the wall-hanging

bracket

Please contact your local Panasonic dealer to purchase

the recommended wall-hanging bracket.

≥Using other wall-hanging brackets, or installing a wall-

hanging bracket by yourself have the risk of personal

injury and product damage. In order to maintain the

unit’s performance and safety, be absolutely sure to

ask your dealer or a licensed contractor to secure the

wall-hanging brackets. Any damage caused by

installing without a qualified installer will void your

warranty.

≥Carefully read the instructions accompanying optional

accessories, and be absolutely sure to take steps to

prevent the TV from falling off.

≥Handle the TV carefully during installation since

subjecting it to impact or other forces may cause

product damage.

≥Take care when fixing wall brackets to the wall.

Always ensure that there are no electrical cables or

pipes in the wall before hanging bracket.

≥To prevent fall and injury, remove the TV from its fixed

wall position when it is no longer in use.

Connections

Refer to [eHELP] and the separate sheet for details

about connections.

≥Please ensure that the unit is disconnected from the

mains socket before attaching or disconnecting any

cables.

≥Keep the TV away from electronic equipment (video

equipment, etc.) or equipment with an infrared sensor,

otherwise distortion of image / sound may occur or

operation of other equipment may be affected.

≥Please also read the manual of the equipment being

connected.

∫AV devices

(DVD Recorder / Blu-ray Recorder, Set top box, etc.)

≥For details, refer to [eHELP] (Search by Purpose >

Watching > Basic > Basic connection).

∫Aerial

(For viewing cable / digital / analogue broadcasts)

≥For details, refer to [eHELP] (Search by Purpose >

Watching > Basic > Basic connection).

∫Satellite connection

≥To ensure your satellite dish is correctly installed,

please consult your local dealer. Also consult the

received satellite broadcasting companies for details.

≥For details, refer to [eHELP] (Search by Purpose >

Watching > Basic > Satellite connection).

∫TV>IP connection (server, client etc.)

≥This function may not be available depending on

network condition and broadcast.

≥For information about the connections, read the

manual of the TV>IP server.

≥For details, refer to [eHELP] (Search by Purpose >

Functions > TV>IP).

∫Network

A broadband network environment is required to be able

to use internet services.

≥If you do not have any broadband network services,

please consult your retailer for assistance.

≥Prepare the internet environment for wired connection

or wireless connection.

≥Setup of the network connection will start when first

using the TV. (p. 12)

≥For details, refer to [eHELP] (Search by Purpose >

Network > Network connections).

TV

HDMI cable

4K / HDR compatible equipment

≥Connect the 4K compatible equipment to HDMI

terminal using a 4K compatible cable and you can

watch content in 4K format.

≥Set to [Mode1] when the image or sound in HDMI

input is not played properly.

≥Supporting HDR does not increase the peak

brightness capabilities of the TV panel.

∫[HDMI Auto Setting] ([Setup] menu)

Reproduces the image more precisely with the expanded

colour gamut and more smoothly with the high frame rate

when connecting the 4K compatible equipment. Select

the mode depending on the equipment.

[Mode1]:

For better compatibility. Set to [Mode1] when the

image or sound in HDMI input is not played properly.

[Mode2]:

For the 4K compatible equipment that has the function

to output the image precisely with the expanded

colour gamut.

a b c d e

mm –

200 200 10 12 M6

200 200 12 17 M6

Basic connections

e

a

b

c (Minimum)

d (Maximum)

43-inch model

50-inch model

Connections for 4K / HDR compatible

equipment

HDMI

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 8 ページ２０２３年１月１３日　金曜日　午後３時１８分

9

English

[Mode3]:

For the 4K compatible equipment that has the function

to output the high frame rate image.

(This mode is valid in HDMI 1 and 2)

≥To change the mode

1. Select the HDMI input mode connected to the

equipment.

2. Display the menu bar and select [Main Menu], and

then select [Setup].

3. Change the mode in [HDMI Auto Setting].

≥For information about the valid format, refer to

[eHELP] (Search by Purpose > Watching > 4K

resolution > HDMI Auto Setting).

∫DVD Player / Camcorder / Game equipment

(VIDEO equipment)

AV adaptor (Shielded / not supplied)

Composite video cable (Shielded)

≥Use shielded composite cable.

Audio cable (Shielded)

≥Use shielded audio cables.

DVD Player / Camcorder / Game equipment

∫Headphones / Subwoofer

≥To use headphones, set [Headphone Terminal

Output] in the Sound menu to [Headphone].

≥To use the subwoofer, set [Headphone Terminal

Output] in the Sound menu to [Sub Woofer].

∫USB HDD (for recording)

≥Use USB 1 port for connecting the USB HDD.

≥For details, refer to [eHELP] (Search by Purpose >

Recording).

∫Common Interface

≥Turn off the TV by unplugging the mains plug when

inserting or removing the CI module.

≥If a smart card and a CI module come as a set, first

insert the CI module, then insert the smart card into

the CI module.

≥Insert or remove the CI module completely in the

correct direction as shown.

≥Normally encrypted channels will appear. (Viewable

channels and their features depend on the CI

module.)

If encrypted channels do not appear

[Common Interface] ([Setup] menu)

≥There might be some CI modules in the market with

older firmware versions that do not work fully

interoperable with this new CI+ v1.4 TV. In this case,

please contact your content provider.

≥For details, refer to [eHELP] (Search by Purpose >

Functions > Common Interface), read the manual of

the CI module, or check with the content provider.

≥Be sure to remove the CI module card, etc. before

repairing, transferring or discarding.

This TV supports Bluetooth® communications.

Bluetooth® devices that have been registered (paired)

with this TV can connect to (communicate with) this TV.

≥When registering (pairing) a Bluetooth® device with

this TV, move the device within 50 cm of the TV.

≥It is not possible to register (pair) Bluetooth® devices

that are not compatible with this TV.

≥If a Bluetooth® enabled device that you have

registered (paired) with this TV is then registered and

used on another device, it may then be made

unavailable for use with this TV. Register the device

on this TV again if this occurs.

≥You can register Bluetooth® audio devices that

support A2DP on this TV. Due to the characteristics of

wireless technology, there will be some delay between

the playback of video and audio.

≥A maximum of 2 audio devices that support A2DP can

be used simultaneously. To use 2 devices, set [Dual

Audio] (Setup > Bluetooth Setup > Bluetooth Audio

Settings) to [On], and then connect the second device.

≥Depending on the audio devices that support A2DP

you are connecting, you may be unable to individually

control the volume when you have connected 2

devices.

≥For details, refer to [eHELP] (Search by Purpose >

Functions > Bluetooth devices).

Other connections

abcd

AV IN

(Viewing)

(Listening)

a: L

b: Video

c: Ground

d: R

3.5 mm

TV

Connecting Bluetooth® devices

Registering Bluetooth® devices

CI module

Common

Interface

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 9 ページ２０２３年１月１３日　金曜日　午後３時１８分

10 English

Either Bluetooth® wireless technology or the infrared

communication function can be used for the

transmissions between the TV and the remote control.

Since voice controls (p. 11) use Bluetooth® wireless

technology, the remote control needs to be registered

(paired) with the TV.

≥When using the remote control for the first time after

purchase, when you press any button while pointing

the remote control at the remote control signal

receiver with batteries inserted, the remote control is

automatically registered (paired).

≥When registering, face the remote control at the

remote control signal receiver on the TV, within about

50 cm.

≥Registration may not be completed correctly if the

batteries in the remote control are running low.

∫If registration fails

If registration (pairing) is not completed properly, try

registering again.

Use the below procedure to select [Pairing]

[Main Menu] [Setup] [System Menu]

[Remote Control Settings] [Pairing]

≥The registration screen is displayed, so follow the on-

screen instructions to register.

∫When the remote control does not respond

1Press and hold the buttons shown below

simultaneously for about 3 seconds

2Point the remote control at the remote control signal

receiver and follow the procedure below to deregister

(unpair) the remote control

[Main Menu] [Setup] [System Menu]

[Remote Control Settings] [Unpair]

3Register (pair) the remote control again “If

registration fails” (p. 10)

<Note>

≥If the remote control is not registered (paired) with the

TV, they communicate via infrared. Face the remote

control at the TV’s remote control signal receiver for

operation when infrared communication is used.

Please note that voice controls will not be available.

≥If the remote control is registered (paired) with the TV,

they communicate via Bluetooth®. You will not need to

face the remote control at the TV’s remote control

signal receiver when Bluetooth® communication is

used. Please note, however, that you will need to face

the remote control at the remote control signal

receiver for operation when turning on or off the TV.

Identifying Controls

1 [ ]: Switches TV On or Off (Standby)

2 Viewing mode

3Streaming Service

4 Coloured buttons

(red-green-yellow-blue)

5MENU

6HOME

7 Information

8OK

9 Option menu

10

PROVIDER/LIST

11

Voice control

12

Sound Mute On / Off

13

Volume Up / Down

14

Numeric buttons

15

[eHELP]

16

Microphone

17

Input mode selection

18

Applications list

19

TV Guide

Registering the remote control (supplied)

Remote Control

1

5

7

8

9

10

6

12

11

2

3

4

14

13

15

16

17

24

26

27

25

28

18

19

20

21

22

23

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 10 ページ２０２３年１月１３日　金曜日　午後３時１８分

11

English

20

EXIT

21

Cursor buttons

22

BACK

23

MY APP (Assigns a favourite application.)

24

Operations for contents, connected equipment,

etc.

25

Teletext

26

Channel Up / Down

27

Subtitles

28

Last view

If another Panasonic TV is near the TV, the other TV

may be operated when you use the remote control with

infrared. Change the TV’s remote control mode to avoid

simultaneous operation.

≥Remote control mode 1 is the default setting.

1Use the below procedure to select [Mode Setting]

[Main Menu] [Setup] [System Menu]

[Remote Control Settings] [Mode Setting]

2Select [Mode2]

≥Press and hold [OK]/[MUTE]/[2]* (numeric buttons)

buttons for at least 3 seconds, then press the OK

button.

To set to [Mode1], set to “1”, to set to [Mode3], set

to “3”, to set to [Mode4], set to “4”.

≥When using the remote control mode 1, set the TV

and the remote control to mode 1 respectively.

∫Remote Control Mode Error

When the TV receives a signal with a different remote

control mode to the mode that is set on the TV five times,

Remote Control Mode Error is displayed.

≥Follow the on-screen instructions.

≥When all settings are initialised by performing

[Shipping Condition], the TV’s remote control mode is

reset to mode 1. If you cannot operate the TV with

your remote control, press and hold [OK]/[MUTE]/[1]

buttons for at least 3 seconds to set the remote control

to mode 1.

∫Remote Control Mode Reset

You can make a forced reset of the TV’s remote control

mode to change to mode 1.

1Get another Panasonic remote control whose remote

control mode has been set to 1

2Point the remote control at the TV, then press the

MUTE button for about 15 seconds

3When a screen asking you to confirm the forced reset

of the remote control mode is displayed, press the

MUTE button again for about 3 seconds

The TV recognizes speech when you talk into the voice

control microphone, enabling you to perform operations

such as changing TV channels, adjusting the volume,

searching for programmes, and doing internet searches.

≥If the remote control is not registered (paired) with the

TV, register (pair) the remote control. (p. 10)

≥Amazon Alexa functions may be currently under

consideration for a future release in your region. They

will be made available when they become ready for

release.

≥Amazon Alexa functions may not be available in

certain countries or regions or for certain

broadcasters.

≥The TV needs to be connected to the internet in order

to perform searches, etc. (p. 8)

≥The effective range for voice controls depends on the

viewing environment.

≥Operation may not be correct depending on the type

of voice the person has and the way they speak, as

well as the surrounding environment and conditions.

≥When other Bluetooth® devices are connected at the

same time, voice controls may not work properly

depending on the connected devices.

Selecting the voice service (when it is not selected)

1Press the voice control button

2Selects the voice service for voice control function.

≥Only one voice service can be used with the TV.

≥The voice service selection screen can also be

displayed via [Voice Control] on the menu bar.

Controlling with your voice

1Press the voice control button

2Speak into the voice control microphone

≥Functions of voice control and voice services are

subject to change without notice.

Remote Control Mode setting

Voice controls

Voice control

microphone

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 11 ページ２０２３年１月１３日　金曜日　午後３時１８分

12 English

1 Ambient sensor

≥Senses ambient lighting conditions to adjust the

picture when [Auto Brightness] and [Auto White

Balance] (Picture > Ambient Sensor Settings) are

set to [On].

2 Remote control signal receiver (for infrared

communication)

≥Do not place any objects between the TV remote

control signal receiver and remote control.

3Power LED

≥The LED blinks when an infrared signal is received

from the remote control.

4 Power On / Off switch

≥Switches TV On or Off (Standby)

≥Press the switch to turn on.

When the TV is on, press and hold the switch to

turn off. Keep pressing until it turns off.

≥When the TV is on, press the switch to display the

operation guide.

Operation guide (Example):

The item selection switches between Power,

Volume, Channel, and Input* each time you press

the switch, and pressing and holding enables item

operation. Follow the on-screen messages.

Press the switch to select the input when the input

selection list appears. Press and hold the switch to

confirm.

≥To turn Off the apparatus completely, you must pull

the mains plug out of the mains socket.

≥[ ]: Standby / On (Bottom of the TV)

5 Model name plate

First time Auto Setup

When the TV is turned on for the first time, it will

automatically search for available TV channels and give

options to set up the TV.

≥These steps are not necessary if the setup has been

completed by your local dealer.

≥Please complete connections (p. 8 - 9) and settings (if

necessary) of the connected equipment before

starting Auto Setup. For information about the settings

for the connected equipment, read the manual of the

equipment.

1Plug the TV into a live mains socket and

turn the power on

2Select the following items

Set up each item by following the on-screen instructions.

Example:

Indicator / Control panel

Red: Standby

Green: On

• Depending on the ambient brightness,

adjusts the brightness of LED to easy-

to-view levels automatically.

Orange: Standby with some functions (recording,

etc.) active

3

4

1, 2

5

Bottom of the TV

≥Takes a few seconds to be displayed.

Power

Volume Volume

Channel Channel

Input

Please select your viewing environment.

ShopHome

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 12 ページ２０２３年１月１３日　金曜日　午後３時１８分

13

English

Select the language

Select your country

≥To continue using Voice Guidance, after selecting

your country, press [5] (numeric button). Make

settings for [Accessibility].

Select [Home]

Select [Home] for use in a home viewing environment.

≥[Shop] is for shop display.

≥To change the viewing environment later on, the set

will need to have all settings initialised by accessing

[Shipping Condition].

Set up the network connection

≥Depending on the country you select, select your

Region or store the Child Lock-PIN number (“0000”

cannot be stored).

Tick the TV signal mode to tune, and then select

[Start Auto Setup]

≥Setup screen varies depending on the country and the

signal mode you select.

≥[DVB-S Antenna Setup]

Ensure the satellite connections are completed (p. 8)

and select the tuner mode ([Dual Tuner] / [Single

Tuner]).

≥[DVB-C Network Settings]

Normally set [Frequency] and [Network ID] to [Auto].

If [Auto] is not displayed or if necessary, enter

[Frequency] and [Network ID] specified by your cable

provider with numeric buttons.

If tuning has failed check the Satellite cable, RF cable,

and the network connection, and then follow the on-

screen instructions.

<Note>

≥The TV goes into Standby mode when no operation is

performed for 4 hours if [Auto Standby] in the Timer

menu is set to [On] (factory setting).

≥The TV goes into Standby mode when no signal is

received and no operation is performed for 10 minutes

if [No signal Power off] in the Timer menu is set to [On]

(factory setting).

≥To retune all channels

[Auto Setup] in [Tuning Menu] ([Setup] menu)

≥To add the available TV signal mode later

[Set up TV Signals] ([Setup] menu)

≥To initialise all settings

[Shipping Condition] in [System Menu] ([Setup]

menu)

FAQs

Before requesting service or assistance, please follow

these simple guides to solve the problem.

≥For details, refer to [eHELP] (Support > FAQs).

The TV does not switch on

≥Check the mains lead is plugged into the TV and the

mains socket.

The TV goes into Standby mode

≥Auto power standby function is activated.

The remote control does not work or is intermittent

≥Are the batteries installed correctly?

≥Has the TV been switched on?

≥The batteries may be running low. Replace them with

new ones.

≥Point the remote control directly at the TV’s remote

control signal receiver (within about 7 m and a

30 degree angle of the signal receiver).*

≥Situate the TV away from sunshine or other sources of

bright light so they do not shine on the TV’s remote

control signal receiver.*

≥Is the remote control mode wrong? (p. 11)

≥If you are trying to use voice controls, is the remote

control registered (paired) with the TV? (p. 10)

≥If the solutions above do not fix the problem,

deregister (unpair) the remote control, then

register (pair) it again. “When the remote

control does not respond” (p. 10)

When infrared communication is used

No image is displayed

≥Check the TV is turned on.

≥Check the mains lead is plugged into the TV and the

mains socket.

≥Check the correct input mode is selected.

≥Is [Backlight], [Contrast], [Brightness] or [Colour] in the

Picture menu set to the minimum?

≥Check all required cables and connections are firmly

in place.

≥Face the remote control at the TV, press and hold the

power button of the remote control for 10 seconds or

more, then release your finger to reboot the TV.

Auto Setup is now complete and the TV is

ready for viewing.

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 13 ページ２０２３年１月１３日　金曜日　午後３時１８分

14 English

An unusual image is displayed

≥This TV has a built-in Self Test. Makes a diagnosis of

picture or sound problems.

[TV Self Test] ([Help] menu)

≥Turn off the TV by unplugging the mains plug, then

turn on by inserting the mains plug into the mains

socket.

If it is not possible to unplug and plug in the mains

plug, do one of the following to reboot the TV.

• [Reboot] in [System Menu] ([Setup] menu)

• Face the remote control at the TV, press and hold

the power button of the remote control for 10

seconds or more, then release your finger.

≥If the problem persists, initialise all settings.

[Shipping Condition] in [System Menu] ([Setup]

menu)

The image or sound from external equipment are

unusual when the equipment is connected via HDMI

≥Set [HDMI Auto Setting] ([Setup] menu) to [Mode1].

(p. 8)

No sound is produced from the connected HDMI

equipment

≥Set the audio output format of the connected HDMI

equipment to PCM.

Voice control function does not work

≥If the remote control is not registered (paired) with the

TV, register (pair) the remote control. (p. 10)

≥Check the network connections and settings.

Parts of the TV become hot

≥Parts of the TV may become hot. These temperature

rises do not pose any problems in terms of

performance or quality.

When pushed with a finger, the display panel moves

slightly and makes a noise

≥There is a little gap around the panel to prevent

damage to the panel. This is not a malfunction.

About the inquiry

≥Please contact your local Panasonic dealer for

assistance.

If you make an inquiry from a place where this TV is

not present, we cannot answer about contents that

require visual confirmation for connection,

phenomenon, etc. of this TV itself.

Maintenance

First, remove the mains plug from the mains

socket.

Regular care:

Gently wipe the surface of the display panel, cabinet, or

pedestal by using a soft cloth to remove dirt or

fingerprints.

For stubborn dirt:

(1) First clean the dust from the surface.

(2) Dampen a soft cloth with clean water or diluted

neutral detergent (1 part detergent to 100 parts

water).

(3) Wring out the cloth firmly. (Please note, do not let

liquid enter the TV inside as it may lead to product

failure.)

(4) Carefully wipe moisten and wipe away the stubborn

dirt.

(5) Finally, wipe away all the moisture.

≥Do not use a hard cloth or rub the surface too hard,

otherwise this may cause scratches on the surface.

≥Take care not to subject the surfaces to insect

repellent, solvent, thinner or other volatile substances.

This may degrade surface quality or cause peeling of

the paint.

≥The surface of the display panel is specially treated

and may be easily damaged. Take care not to tap or

scratch the surface with your fingernail or other hard

objects.

≥Do not allow the cabinet and pedestal to make contact

with a rubber or PVC substance for a long time. This

may degrade surface quality.

Wipe the mains plug with a dry cloth at regular intervals.

Moisture and dust may cause fire or electrical shock.

Display panel, Cabinet, Pedestal

Mains plug

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 14 ページ２０２３年１月１３日　金曜日　午後３時１８分

15

English

Specifications

∫TV

Model No.

: TX-43MXT966, TX-43MXF967,

TX-43MXN968, TX-43MXX969

: TX-50MXT966, TX-50MXF967,

TX-50MXN968, TX-50MXX969

Power source

AC 220-240 V, 50 / 60 Hz

Panel

LED backlight Liquid Crystal Display

Sound

Speaker output

20 W (10 W × 2)

Headphones / Subwoofer

3.5 mm stereo mini jack × 1

Connection terminals

AV input

VIDEO

1.0 V[p-p] (75 )

AUDIO L - R

0.5 V[rms]

HDMI 1 / 2 / 3 / 4 input

TYPE A Connectors

HDMI 1:

4K120Hz, VRR (Variable Refresh Rate),

AMD FreeSync™ Premium, Content Type,

Deep Colour, x.v.Colour™

HDMI 2:

4K120Hz, VRR (Variable Refresh Rate),

AMD FreeSync™ Premium, Content Type, eARC

(Enhanced Audio Return Channel) /

ARC (Audio Return Channel), Deep Colour,

x.v.Colour™

HDMI 3 / 4:

4K, Content Type, Deep Colour, x.v.Colour™

≥This TV supports “HDAVI Control 5” function.

Card slot

Common Interface slot (complies with CI Plus) × 2

ETHERNET

RJ45, IEEE802.3 10BASE-T / 100BASE-TX

≥Use Shielded Twist Pair (STP) LAN cable.

USB 1 / 2 / 3

USB 1:

DC 5 V, Max. 900 mA [SuperSpeed USB (USB 3.0)]

USB 2 / 3:

DC 5 V, Max. 500 mA [Hi-Speed USB (USB 2.0)]

DIGITAL AUDIO output

PCM / Dolby Audio, Fibre optic

Receiving systems / Band name

Satellite

DVB-S / S2

Receiver IF frequency range - 950 MHz to 2150 MHz

Digital

DVB-T / T2, DVB-C

Channel coverage: UHF / VHF / Cable

Analogue

PAL B / G, D / K, H, I

SECAM B / G, D / K, L / L’

Channel coverage: UHF / VHF / Cable

PAL 525 / 60 (VCR)

M.NTSC (VCR)

NTSC (AV input only)

Satellite dish input

Female F-type 75  × 2

Aerial input

VHF / UHF

Operating conditions

Temperature

0°C - 35°C

Humidity

20 % - 80 % RH (non-condensing)

Built-in wireless LAN

Standard compliance and Frequency band

IEEE802.11a/n/ac: 5 GHz band

IEEE802.11b/g/n: 2.4 GHz band

Security

WPA3-SAE (AES)

WPA2-PSK (TKIP/AES)

WPA-PSK (TKIP/AES)

WEP (64 bit/128 bit)

Bluetooth® wireless technology*

Standard Compliance and Frequency band

Bluetooth® 5.0: 2.4 GHz band

Not all the Bluetooth® compatible devices are available with this

TV. Up to 5 devices can be used simultaneously.

<Note>

≥Design and Specifications are subject to change without notice.

Mass and Dimensions shown are approximate.

≥For information about the open source software, refer to

[eHELP] (Search by Purpose > Read first > Before use >

Licence).

≥For more product information, please visit EPREL:

https://eprel.ec.europa.eu.

EPREL registration number is available on

https://eprel.panasonic.eu/product.

43-inch model

50-inch model

Customer’s Record

The model number and serial number of this product may be

found on its rear panel. You should note this serial number in

the space provided below and retain this book, plus your

purchase receipt, as a permanent record of your purchase to

aid in identification in the event of theft or loss, and for

Warranty Service purposes.

Model Number

Serial Number

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 15 ページ２０２３年１月１３日　金曜日　午後３時１８分

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 16 ページ２０２３年１月１３日　金曜日　午後３時１８分

Bedienungsanleitung

LED TV

Serie

TX-43MX*96*

TX-50MX*96*

(Darstellung: TX-50MX*96*)

Für ausführlichere Anweisungen siehe [eHELP] (integrierte Bedienungsanleitung).

≥

≥ [Haupt-Menü] [Hilfe] [eHELP]

Vielen Dank, dass Sie dieses Produkt von Panasonic erworben haben.

Bitte lesen Sie diese Bedienungsanleitung vor der Inbetriebnahme des Gerätes sorgfältig durch und bewahren Sie sie

für ein späteres Nachschlagen auf.

Bitte das Kapitel “Sicherheitsmaßnahmen” in diesem Handbuch vor Gebrauch sorgfältig durchlesen.

Die Bilder in dieser Anleitung dienen lediglich als Illustrationen.

Wenn eine Kontaktaufnahme mit Ihrem Panasonic-Fachhändler erforderlich wird, beziehen Sie sich dazu bitte auf die

dem Gerät beiliegende Pan-Europäische Garantie.

Deutsch

Gedruckt in China

Deutsch

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 1 ページ２０２３年１月１３日　金曜日　午後３時１８分

2Deutsch

Inhaltsverzeichnis

Bitte unbedingt lesen

Wichtiger Hinweis ················································ 3

Sicherheitsmaßnahmen ········································ 4

Wandhalterungsmontage ······································ 8

Anschlüsse ························································ 8

Anordnung der Bedienelemente ····························10

Erstmalige automatische Einrichtung ······················12

Häufig gestellte Fragen ········································13

Pflege und Instandhaltung ····································14

Technische Daten ···············································15

Die Begriffe HDMI, HDMI High-Definition Multimedia

Interface, HDMI-Aufmachung (HDMI Trade Dress) und

die HDMI-Logos sind Marken oder eingetragene Marken

von HDMI Licensing Administrator, Inc.

Dolby, Dolby Vision, Dolby Vision IQ, Dolby Atmos,

Dolby Audio und das Doppel-D-Symbol sind Marken von

Dolby Laboratories Licensing Corporation.

In Lizenz von Dolby Laboratories gefertigt.

Vertrauliche unveröffentlichte Werke.

WPA3™, WPA2™, WPA™ sind Warenzeichen von

Wi-Fi Alliance®.

Die Wortmarke Bluetooth® und die Logos sind

eingetragene Warenzeichen der Bluetooth SIG, Inc., und

jegliche Verwendung solcher Marken durch die

Panasonic Holdings Corporation geschieht unter Lizenz.

Bei „DVB“ und beim „DVB“-Logo handelt es sich um

Marken des DVB Project.

Bei x.v.Colour™ handelt es sich um einen

Markennamen.

DiSEqC™ ist eine eingetragene Marke von EUTELSAT.

Modell-Nr.

TX-43MXT966

TX-50MXT966

TX-43MXN968

TX-50MXN968

TX-43MXF967

TX-50MXF967

TX-43MXX969

TX-50MXX969

≥Sehen Sie auf dem separaten Blatt für

Informationen zur Installation des Fernsehers

nach.

≥Je nach Modell können die Abbildungen variieren.

YouTube und das YouTube-Logo sind Marken von

Google LLC.

Amazon, Prime Video, Alexa und alle zugehörigen Logos

sind Marken von Amazon.com, Inc. oder deren

Tochtergesellschaften.

Dieses Produkt entspricht der Technischen Spezifikation

der UHD Alliance: UHDA spezifizierter Referenzmodus,

Version 1.0. FILMMAKER MODE™ Logo ist ein

Warenzeichen der UHD Alliance, Inc. in den Vereinigten

Staaten und anderen Ländern.

vorbehalten. AMD, das AMD-Arrow-Logo, FreeSync

sowie deren Kombinationen sind Marken von Advanced

Micro Devices, Inc.

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 2 ページ２０２３年１月１３日　金曜日　午後３時１８分

3

Deutsch

Wichtiger Hinweis

Hinweis für die Funktionen DVB/Datensendungen/IPTV

≥

Dieses Fernsehgerät ist so konzipiert, dass es die Standards

(Stand April 2023) der digitalen terrestrischen Dienste DVB-T/T2

(MPEG2, MPEG4-AVC(H.264) und MPEG HEVC(H.265)), der

digitalen Kabeldienste DVB-C (MPEG2, MPEG4-AVC(H.264) und

MPEG HEVC(H.265)) und der digitalen Satellitendienste DVB-S

(MPEG2, MPEG4-AVC(H.264) und MPEG HEVC(H.265)) erfüllt.

Bitte konsultieren Sie Ihren Fachhändler hinsichtlich der

Verfügbarkeit von DVB-T/T2- oder DVB-S-Diensten an Ihrem

Wohnort.

Bitte konsultieren Sie Ihren Kabel-TV-Anbieter hinsichtlich der

Verfügbarkeit von DVB-C-Diensten für diesen Fernseher.

≥

Bei einem Signal, das nicht den Standards DVB-T/T2, DVB-C

oder DVB-S entspricht, funktioniert dieser Fernseher

möglicherweise nicht wie vorgesehen.

≥

Abhängig von Land, Region, Sender, Dienstanbieter, Satellit und

Netzwerkumgebung stehen nicht alle Funktionen zur Verfügung.

≥

Nicht alle CI-Module funktionieren ordnungsgemäß mit diesem

Fernseher. Informationen über verfügbare CI-Module erhalten Sie

bei Ihrem Dienstanbieter.

≥

Dieser Fernseher funktioniert möglicherweise mit einem nicht

vom Dienstanbieter genehmigten CI-Modul nicht

ordnungsgemäß.

≥

Abhängig vom Dienstanbieter werden möglicherweise

zusätzliche Gebühren fällig.

≥

Kompatibilität mit zukünftigen Funktionen oder Diensten kann

nicht garantiert werden.

Internet-Apps und Sprachsteuerungsfunktionen werden von den

jeweiligen Dienstanbietern bereitgestellt und können jederzeit

geändert, unterbrochen oder eingestellt werden.

Panasonic übernimmt keine Verantwortung und gibt keine Garantie

auf die Verfügbarkeit oder den Fortbestand dieser Dienstleistungen.

Panasonic garantiert nicht den Betrieb und die Leistung von

Peripheriegeräten anderer Fabrikate. Wir übernehmen keinerlei

Haftung für Schäden, die durch den Betrieb und/oder die Leistung

dieser Peripheriegeräte entstehen.

Beschädigungen

≥

Mit Ausnahme von Fällen, in denen die Verantwortung durch

örtliche Vorschriften anerkannt wird, übernimmt Panasonic keine

Verantwortung für Fehlfunktionen, die durch unsachgemäßen

Gebrauch des Produkts verursacht werden, sowie für andere

Probleme oder Schäden, die durch den Gebrauch dieses

Produkts entstehen.

≥

Panasonic übernimmt keine Verantwortung für den Verlust von

Daten usw., der durch Katastrophen verursacht wurde.

≥

Peripheriegeräte, die vom Kunden separat vorbereitet wurden,

fallen nicht unter die Garantie. Der Kunde trägt die Verantwortung

für die auf solchen Geräten gespeicherten Daten und ihre Pflege.

Panasonic übernimmt keine Verantwortung für den Missbrauch

dieser Daten.

Umgang mit Kundendaten

Bestimmte Kundeninformationen, wie z. B. die IP-Adresse der

Netzwerkschnittstelle Ihres Geräts (dieses Fernsehers), werden

erfasst, sobald Sie Ihren intelligenten Fernseher der Marke

Panasonic (dieses Fernsehgerät) oder andere Geräte mit dem

Internet verbinden (Auszug aus unserer Datenschutzerklärung). Wir

tun dies, um unsere Kunden und die Integrität unseres Service sowie

die Rechte und das Eigentum von Panasonic zu schützen.

Wenn Sie die Internetverbindungsfunktion dieses Fernsehers

nutzen, können nach Zustimmung (in den Rechtsordnungen, in

denen die Zustimmung des Kunden zur Erfassung

personenbezogener Daten gemäß den geltenden

Datenschutzgesetzen erforderlich ist) oder nach Überprüfung der

Allgemeinen Geschäftsbedingungen / Datenschutzrichtlinien von

Panasonic (im Folgenden als AGB usw. bezeichnet)

Kundeninformationen über die Nutzung dieses Geräts gesammelt

und gemäß den Allgemeinen Geschäftsbedingungen usw.

verwendet werden.

Einzelheiten zu den Nutzungsbedingungen und zur

Datenschutzrichtlinie finden Sie unter [eHELP] (Suche nach Zweck >

Netzwerk > Netzwerkeinstellungen > Nutzungsbedingungen).

Es können personifizierte Kundendaten durch den Fernsehsender

oder dem Anwendungsanbieter gespeichert werden. Vor Transport,

Reparatur oder Entsorgung dieses Fernsehers sollten alle

aufgezeichneten Daten entsprechend der folgenden Anleitung

gelöscht werden.

[Werkseinstellungen] in [System-Menü] (Menü [Setup])

Über den Anwendungsanbieter ist es möglich, dass gesammelte

Kundendaten von diesem Fernseher an Dritte oder andere

Webseiten gelangen. Bitte bestätigen Sie im Voraus die allgemeinen

Geschäftsbedingungen etc. Ihres Dienstanbieters.

• Panasonic trägt keine Verantwortung für das Sammeln von

Kundendaten von diesem Fernseher und deren Bereitstellung an

Dritte oder andere Webseiten.

• Bei Eingabe Ihrer Kreditkartendaten wie Nummer, Name, usw. ist

eine besondere Aufmerksamkeit auf die Vertrauenswürdigkeit

des Dienstanbieters zu richten.

• Zugangsdaten können auf dem Server des Dienstanbieters

gespeichert sein. Vor Transport, Reparatur oder Entsorgung

dieses Fernsehers sollte sichergestellt werden, dass alle

kundenbezogenen Daten entsprechend den

Geschäftsbedingungen des Dienstanbieters gelöscht worden

sind.

Zur Aufnahme und Wiedergabe von Inhalten auf diesem und

anderen Geräten ist möglicherweise die Erlaubnis des Inhabers des

Urheberrechts oder anderer ähnlicher Rechte am jeweiligen Inhalt

erforderlich. Da Panasonic nicht berechtigt ist, Ihnen diese Erlaubnis

zu erteilen, wird Ihnen diese Erlaubnis nicht erteilt und Panasonic

weist ausdrücklich das Recht, die Fähigkeit oder die Absicht von

sich, eine solche Erlaubnis in Ihrem Namen einzuholen. Es liegt in

Ihrer Verantwortung sicherzustellen, dass Ihre Verwendung dieses

oder eines anderen Geräts unter Einhaltung der geltenden

Urheberschutzvorschriften Ihres Landes erfolgt. Bezüglich weiterer

Informationen zu den relevanten Gesetzen und Bestimmungen

machen Sie sich bitte mit den entsprechenden Vorschriften vertraut

oder wenden Sie sich an den Inhaber der Rechte an dem Inhalt, den

Sie aufzeichnen oder wiedergeben möchten.

Dieses Produkt ist unter der AVC Patent-Portfolio-Lizenz für die

persönliche Nutzung durch einen Verbraucher oder für andere

Zwecke lizenziert, bei denen es keine Vergütung für (i) die Codierung

von Videos gemäß dem AVC Standard ("AVC Video") und/oder (ii)

die Decodierung von AVC Video erhält, das von einem Verbraucher,

der eine persönliche Aktivität ausübt, codiert wurde und/oder von

einem Videoanbieter bezogen wurde, der eine Lizenz für die

Bereitstellung von AVC Video besitzt. Für eine Nutzung zu

irgendwelchen anderen Zwecken wird keine Lizenz erteilt oder

implizit gewährt.

Weitere Informationen hierzu sind von MPEG LA, L.L.C. erhältlich.

Siehe http://www.mpegla.com.

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 3 ページ２０２３年１月１３日　金曜日　午後３時１８分

4Deutsch

Diese Markierung zeigt an, dass das Produkt

mit Wechselspannung arbeitet.

Diese Markierung zeigt an, dass das Produkt

mit Gleichspannung arbeitet.

Dieses Zeichen bedeutet, dass der Fernseher

mit seiner doppelten Isolierung als Klasse II

Gerät eingestuft ist, d.h. dieses Produkt

benötigt zum sicheren Betrieb keine

zusätzliche Erdung.

Nur aufrecht transportieren.

Sicherheitsmaßnahmen

Um die Gefahr von Stromschlag, Feuer, Schäden oder

Verletzungen zu vermeiden, befolgen Sie bitte die

nachstehenden Hinweise und Warnungen:

∫Netzstecker und Netzkabel

≥Dieser Fernseher wird mit 220–240 V

Wechselspannung (AC ) bei einer Frequenz von

50/60 Hz betrieben.

≥Schieben Sie den Netzstecker vollständig in die

Netzsteckdose ein.

≥Achten Sie beim Trennen vom Netz unbedingt darauf,

zuerst den Netzstecker aus der Netzsteckdose zu

ziehen.

≥Um den Apparat vollständig auszuschalten, müssen

Sie den Netzstecker aus der Steckdose ziehen.

Daher muss der Netzstecker jederzeit leicht

zugänglich sein.

≥Ziehen Sie den Netzstecker, bevor Sie den Fernseher

reinigen.

≥Schützen Sie das Netzkabel vor Beschädigung.

• Ziehen Sie unbedingt den Netzstecker aus der

Netzsteckdose, bevor Sie den Aufstellungsort des

Fernsehers verändern.

• Das Netzkabel darf nicht verdreht, geknickt oder

überdehnt werden.

• Verwenden Sie auf keinen Fall einen beschädigten

Netzstecker oder eine beschädigte Netzsteckdose.

• Achten Sie darauf, dass das Netzkabel nicht durch

den Fernseher abgeklemmt wird.

≥Nur das zum Lieferumfang dieses Fernsehers

gehörige Netzkabel verwenden!

Ziehen Sie den Netzstecker unverzüglich aus der

Netzsteckdose, falls Sie irgendetwas Ungewöhnliches

feststellen.

≥

Der Typ des Netzsteckers kann je nach Land variieren.

≥Berühren Sie den Netzstecker auf

keinen Fall mit nassen Händen.

• Stellen Sie keine schweren

Gegenstände auf das

Netzkabel.

• Verlegen Sie das

Netzkabel nicht in der

Nähe eines heißen

Gegenstands.

• Ziehen Sie nicht am

Netzkabel. Halten Sie das

Netzkabel während des

Herausziehens am

Steckergehäuse.

TX-43_50MXx96x_OIB1_eng_ger_ita_fre_dut_rus.book 4 ページ２０２３年１月１３日　金曜日　午後３時１８分

La page charge ...

Panasonic TX50MXT966 Guide de démarrage rapide

Ce manuel convient également à

Panasonic TX50MXT966 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents