Parrot CK3000 EVOLUTION Manuel utilisateur

User's Guide

Guide de l'utilisateur

Guía del usuario

Guida per l'utente

Handleiding

Manual do utilizador

English Français Español

Italiano Nederlands Português

www.parrot.com.tr

English

Français

Español

Italiano

Nederlands

Português

5

15

25

35

47

59

Warning :

The manufacturer Parrot S.A. and its affiliates should not be held liable towards End-Users or third parties for prejudice caused by misuasage of the product, nor for usage that would be in violation of local traffic regulations and laws.

Disclaimer :

The information in this document is subject to change without notice and does not represent a commitment on the part of vendor. No warranty or representation, either expressed or implied, is made with respect of quality, accuracy or fitness for any particular purpose of this document. The

associated with it at any time without obligation to notify any person or organization of such changes. In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the use or inability to use this product or documentation, even if

advised of the possibility of such damages. This document contains materials protected by copyright. All rights are reserved. No part of this manual may be reproduced or transmitted in any forme, by any means or for any purpose without express written consent. Product names appearing in

this document are mentioned for identification purposes only. All trademarks, product names appearing in this document are registred property of their respective owners.

FCC Compliance Statement :

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions :

1- This device may not cause harmful interference.

2- This device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity:

We, Parrot S.A. of 174 Quai de Jemmapes, 75010 Paris, France, declare under our sole responsibility that our product, Parrot EVOLUTION, to which this declaration relates is in conformity with appropriate standards EN300328, EN301489-17, EN 60950 following the provision of Radio

Equipment and Telecommunication Equipment directive 1995/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC.

Bluetooth:

The Bluetooth

®

word mark and logos are owned by the Bluetooth

®

SIG, Inc. and any use of such marks by Parrot S.A is under license. Other trademarks and trade names are those of their respective owners.

English

User’s guide

English

FrançaisEspañolItalianoNederlands

Português

User's guide

6

CK3000 EVOLUTION

INTRODUCTION

The CK3000 EVOLUTION Car Kit allows you to use your

mobile phone in the car with the highest level of comfort and

the greatest possible safety.

 The voice help feature and the voice recognition capability

enable you to use your phone without taking your hands off

the wheel.

 Your conversation is amplified through the vehicle’s speak-

ers.

The CK3000 EVOLUTION offers you the following features:

 Wireless radio connection with your mobile phone

 Full duplex hands-free conversations with echo cancellation

 Background noise reduction

 Voice recognition (up to 150 names) *

 Automatic muting of the car stereo and connection to your

vehicle’s speakers

 Registering of up to three mobile phones

Kit Contents

 Keypad

 Power supply cable

 Electronic control unit

 Microphone

 Mute cable

 User guide

* Feature only available with certain mobile phones.

User's guide

English

CK3000 EVOLUTION

FrançaisEspañolItalianoNederlands

Português

7

Electronic control unit:

Do not install the control unit near the vehicle’s

heater or air conditioning unit.

Protect the unit from direct exposure to sunlight.

Avoid enclosing the unit inside the vehicle’s

metal wings or panels, which could affect the

quality of the Bluetooth® link.

Microphone:

The microphone must be pointed towards the

driver and preferably fitted between the sun visor

and the rear-view mirror.

Keypad:

You are advised to fit the keypad

where it can easily be reached,

preferably on a flat surface that has

first been cleaned.

Connect the mute cable to the

connector provided on the keypad.

Ensure that the red and green LEDs light

up and switch off according to the position

of the key in the ignition.

FITTING

If your CK3000 EVOLUTION is installed by a professional, skip

directly to the next chapter, entitled «Getting Started».

The CK3000 EVOLUTION comprises an electronic control unit,

a microphone, a 2-key remote control and two ISO connector

plugs for the car stereo.

CAUTION

Connecting the mute cable and power supply

cable:

The mute cable is fitted with black ISO

connectors.

The power supply cable is fitted with grey ISO

connectors.

Car stereo with ISO plugs:

Disconnect the car stereo’s audio and power

leads.

Join the female connectors of the mute cable

and power supply cable to the car stereo.

Join the vehicle’s audio and power cables to the

male connectors.

User's guide

8

CK3000 EVOLUTION

CAUTION

- The red wire of the power cable must be

connected to the constant 12V supply, the orange

wire to the ignition 12V and the black wire to earth.

- Check the wiring diagram of the car stereo’s ISO

power connector plug.

- On some vehicles, the positions of the red and

orange wires may need to be reversed.

This can easily be done by reversing the fuse

holders.

- Do not connect the orange wire to the constant

12V supply, as you could run down the vehicle’s

battery.

If the car stereo features a mute jack, connect the yellow wire

of the mute cable to one of the «Mute in» jacks (1, 2 or 3).

Refer to your car stereo’s manual to determine the position of

the mute jack.

Car stereo without an ISO plug:

You can use a specific adapter for the vehicle (not supplied)

If you do not have an adapter, connect each wire in turn if your

vehicle does not have ISO connector plugs.

If the car stereo has a mute jack, connect using the yellow

wire of the mute cable.

CABLE DIAGRAM CONNECTION

User's guide

English

CK3000 EVOLUTION

FrançaisEspañolItalianoNederlands

Português

9

GETTING STARTED

 Click the central button - the kit says «LANGUAGE» and

then the name of the language currently used by the kit.

 If you are happy with the language, you can exit the menu

by pressing the red button or go to the next menu by turning

the scroll wheel.

 If you wish to change the language, access the menu by

clicking the central button or green button.

 When you turn the scroll wheel, the kit announces the lan-

guages available (English, French, German, Spanish, Italian,

and so on).

 When you hear the required language, confirm by clicking

the central button or green button.

 You will hear a confirmation message.

Choosing the Language When Using for the First Time

 Click the central button - the kit says «LANGUAGE» and

then the name of the language currently used by the kit.

 Turn the scroll wheel until the kit says «VOLUME».

 A beep enables you to determine the current volume level.

 To increase or decrease the volume, access the menu by

clicking the central button or green button.

 Turn the scroll wheel towards the right to increase the vol-

ume or towards the left to decrease the volume. When you are

happy with the level, confirm by clicking the central button or

green button.

 You will hear a confirmation beep.

Adjusting the Volume When Using for the First Time

The first time that you switch the kit on, you must pair your

mobile phone with the hands-free kit.

 Enable the Bluetooth mode on your mobile phone.

 Search for any peripherals.

 Once detected, «Parrot EVOL» is displayed on your phone.

 Select it.

 Enter the link code (1234) when prompted by your phone

and then confirm. The CK3000 EVOLUTION connects to your

phone and says «pairing successful».

All the menus are now available when you click the central

button and their name is announced by the hands-free kit

when you turn the scroll wheel. You are now connected to the

hands-free kit and can use it to make and receive calls.

Pairing

For further information, refer to the chapter

entitled «Pairing» in your mobile phone’s user

guide or check out the www.parrot.biz website

http://www.parrot.biz/guide_chm/evolution/index.

html

On the left of the screen, click on the «Bluetooth®

phones» heading. By choosing the required

mobile, you can access all the configuration

procedures.

User's guide

10

CK3000 EVOLUTION

Making a call manually:

 Dial the number using the phone’s keypad.

 The conversation automatically switches to hands-free

mode. Otherwise, press the kit’s green button.

Receiving a call:

 Press the kit’s green button or say «PHONE» (refer to the

chapter entitled «Magic Words») to receive the call.

 Press the red button on the hands-free kit or say «HANG

UP» (refer to the chapter entitled «Magic Words») if you wish

to reject the call.

Ending a call:

 Press the red button on the hands-free kit or say «HANG

UP» to end the call.

Voicemail

:

You can access your voicemail functions from the hands-free

kit.

 Dial up your voicemail.

 When you hear the messages, click the central scroll wheel.

The kit says

«0».

 Then turn the scroll wheel until you hear the required

number (1, 2, 3, etc.).

 Confirm by pressing the scroll wheel.

Making and Receiving Calls

Redial function*:

 Hold down (long click: +2 sec) the green key on the hands-

free kit to redial the last number dialled. The kit says

«Redial».

Volume during calls:

 During the call, adjust the volume by turning the central

scroll wheel.

Making a call via voice recognition *:

 Press the green button or say «PHONE» if the magic words

are activated (refer to the chapter entitled «Magic Words»).

 Wait until you hear the beep.

 Say the name of the person that you wish to call. You must

have first recorded the voiceprints on your phone or kit (refer

to the chapter entitled «Adding Voiceprints»

).

 If several numbers are associated with the name, say

«Home», «Work» or «Mobile» after the second beep.

Discreet mode:

 During a call, if you wish to switch your call over to your

mobile, press the green button. The kit says «DISCREET

MODE».

 Press the green button again to switch back to hands-free

mode.

* This function is only available on certain phones.

User's guide

English

CK3000 EVOLUTION

FrançaisEspañolItalianoNederlands

Português

11

“French”

“English”

“Italiano”

“Spanish”

“Portuguese”

“Dutch”

To access the kit’s menus:

 Click the central button.

 The kit says «LANGUAGE» and then the name of the

current language.

 When you turn the central scroll wheel, the kit says the

different menus.

 You can exit the menus by pressing the red button on the

keypad or by not pressing anything for more than 15 seconds.

 Click the central scroll wheel - the kit says «LANGUAGE»

and then the name of the current language.

 If you are happy with the language, you can exit the menu

by pressing the red button or go to the next menu by turning

the scroll wheel.

 If you wish to change the language, access the menu by

clicking the central button or green button.

 When you turn the scroll wheel, the kit announces the

languages available (English, French, Spanish, Italiano, Dutch,

Portuguese)

 When you hear the required language, confirm by clicking

the central button or green button.

 You will hear a confirmation message.

 Click the central button - the kit says «LANGUAGE» and

then the name of the language currently used by the kit.

 Turn the scroll wheel until the kit says «VOLUME».

 A beep enables you to determine the current volume level.

 To increase or decrease the volume, access the menu by

clicking the central button or green button.

Changing the Language

ACCESSING THE MENUS

Adjusting the Volume

User's guide

12

CK3000 EVOLUTION

 Turn the scroll wheel towards the right to increase the

volume or towards the left to decrease the volume. When you

are happy with the level, confirm by clicking the central button

or green button.

 You will hear a confirmation beep.

 Click the central button - the kit says «LANGUAGE» and

then the name of the language currently used by the kit.

 Turn the scroll wheel until the kit says «ADD

VOICEPRINTS».

 Access the menu by clicking the central button or green

button.

 The kit disconnects from the phone and is now ready to

receive your contact names.

To send a contact name, refer to your phone’s user guide

or connect to the www.parrot.biz website for details on the

procedure for your phone.

As soon as the kit receives a contact, it gives you the

instructions to be followed.

Adding Voiceprints *

Magic words are used to accept an incoming call or end a call,

as well as activate the voice recognition feature without taking

your hands off the wheel.

 Click the central button - the kit says «LANGUAGE» and

then the name of the language currently used by the kit.

 Turn the scroll wheel until the kit says «MAGIC WORDS»

and the current status («ACTIVATED» or «DEACTIVATED»

).

 If you are happy with the status, you can go to the next

menu by turning the scroll wheel or exit the menu by clicking

the red button.

 If you wish to change the status, click the central button or

green button. The status changes. It changes from

«activated»

to «deactivated» or vice-versa. The kit announces the new

status.

 If you choose to activate the magic words but have not

yet recorded the words

«PHONE» and/or «HANG UP», the

kit automatically switches to record mode. The kit guides you

through the process for recording the magic words.

 Once the magic words have been successfully recorded,

they will be activated.

 Click the central button - the kit says «LANGUAGE» and

then the name of the language currently used by the kit.

 Turn the scroll wheel until the kit says «RECORD

KEYWORDS». Confirm by clicking the central button or green

button.

 The kit says «RECORD ALL KEYWORDS».

 If you do not wish to record all the keywords, turn the scroll

wheel to access the required keyword.

Magic Words

* This function is only available on certain phones.

Recording Keywords Phone - Hang Up - Home* - Mobile* - Work*

Connect to our www.parrot.biz website or go straight

to the

http://www.parrot.biz/guide_chm/evolution/

index.html

On the left of the screen, click on the «Bluetooth

phones» heading: by choosing the required phone,

you can access all the configuration procedures.

* These words are only available on certain phones.

User's guide

English

CK3000 EVOLUTION

FrançaisEspañolItalianoNederlands

Português

13

Volume :

This function adjusts the volume of CK3000 EVOLUTION

.

Click Yes and adjust using or Press «Yes» to confirm.

Auto answer :

This function enables or disables automatic answering of

incoming calls. Click «Yes», and then select «Enable» or

«Disable».

User :

When several telephones are connected to

CK3000

EVOLUTION, this function identifies the telephone with priority.

The phone with the highest priority is the first phone to which

the kit tries to connect to.

Click Yes, «Main user?» is displayed, confirm.

Caller ID :

This function lets you know the identity of the caller. With this

function enabled, when you receive a call, the name of the

person calling you is pronounced if it is already stored in your

phone book and corresponding voice tag is assigned.

Click Yes and select «Enable» or «Disable».

Multi-Tel :

This function is available for Ericsson and Sony Ericsson

phones equipped only with the «Headset» profile. The affected

phones are Ericsson R520, T39, T68m and the first Sony

Ericsson T68i phones (software version lower than R2E). This

option allows the simultaneous use of these different phones

during a single session of use.

The first phone getting connected to the CK3000 EVOLUTION

is the main phone for the use session of the car-kit (until

extinction).

In the phone Menu go to «Extras» for T39/T39m/R520m, or

«Connect» for T68/T68m/T68i/T606/T608/T610/T616/T618/

T630/Z600/Z608.

Press until «Accessories» and press on «Yes».

«Parrot Menu» is displayed, click «Yes»; menu headings are

displayed.

To learn and relearn a name :

Highlight the desired name and press «Yes» to confirm.

Search :

Allows you to look for a name by its first letter(s). To do this,

type a letter and confirm by pressing «Yes».

 If one or more keywords have already been recorded, the

kit selects the first keyword not to have been recorded.

 Press the central button or green button to start recording.

Follow the instructions given by the kit.

 When a keyword has been successfully recorded, the kit

automatically moves to the next keyword.

 When all keywords have been recorded correctly, the kit

automatically activates them.

 You can exit the menu at any time by pressing the red

button and record or re-record the keywords at a later stage.

* These words are only available on certain phones.

Phonebook

SPECIAL MENU ERICSSON

& SONY ERICSSON

The Main Menu consists of the following 4 sections:

«Phonebook», «Parameters», «Keywords» and «Reset

memory». You can access the menu items by selecting

the desired menu item using the key and confirm by

.«pressing «Yes

Parameters

User's guide

14

Pers. Dic :

The key words are pre-recorded in the car kit for French

language only (the language is determined by the language

used by the menus of the phone).

You need to activate this option if you want to use your own

recorded keywords.

Click «Yes», and «Clear memory?» is displayed.

Confirm by pressing «Yes» and «Memory erasing in progress.

Please wait!» - is announced. To cancel, press «No».

It is possible to erase the memory and reset the system

without using the Parrot menu. To do this, hold the red and the

green buttons together.

If the option «Multi-Tel» is activated for this phone, the

CK3000 EVOLUTION will accept incoming calls from the

other phones if they were previously paired with the

CK3000

EVOLUTION.

Warning :

The «Multi-Tel» function is now compatible with the T68i,

T610, T616, T618, Z600 and Z608 (with specific software

versions). This function is available when the «Powersave»

mode is activated in the phone, i.e. «Headset» profile mode.

Once this mode activated, the CK3000 EVOLUTION has

to identify every phone in this new mode. It should be

necessary to connect separately each phone with the

CK3000

EVOLUTION and restarting it between each identification.

N° Phone :

Keywords for calling V-Cards («Home», «Work» and

«Cellular») can be accessed by clicking «Yes», Tel. N°. The

voice recognition learning sequence is exactly the same as the

one for the names.

Key words :

Key words are «Phone» and «Hang Up». You need to record

your own key words for use with «Wordspotting» option.

Wordspotting :

If activated, enables use of keywords to make a call and to

hang up.

 Activated: use keywords or buttons

 Deactivated: use buttons only

Voice recognition

Erasing the memory

User's guide

Français

Guide de l’utilisateur

Português

English

FrançaisEspañolItalianoNederlands

Guide de l’utilisateur

16

CK3000 EVOLUTION

INTRODUCTION

Le Car Kit Parrot EVOLUTION vous permet d’utiliser votre

téléphone en voiture avec le meilleur confort et la meilleure

sécurité possible.

 L’aide vocale et la reconnaissance vocale vous permettent

de l’utiliser sans lâcher votre volant.

 Votre conversation s’effectue à travers les haut-parleurs de

votre véhicule.

Le Parrot EVOLUTION vous offre les fonctionnalités suivantes :

 Connexion radio sans fil avec votre téléphone

 Conversation mains-libres full duplex avec suppression

d’écho

 Réduction du bruit de fond

 Reconnaissance vocale (jusqu’à 200 noms) *

 Coupure automatique de l’autoradio et connexion aux

enceintes de votre véhicule.

 Jumelage jusqu’à 3 téléphones

Contenu de l’emballage

 Clavier

 Câble d’alimentation

 Boîtier électronique

 Microphone

 Câble mute

 Notice d’utilisation

* Fonction disponible uniquement avec certains téléphone

Guide de l’utilisateur

English

CK3000 EVOLUTION

FrançaisEspañolItalianoNederlands

Português

17

Connexion du câble mute et du câble

d’alimentation :

Le câble mute est équipé de connecteurs ISO

de couleur noire.

Le câble d’alimentation est équipé de

connecteurs ISO de couleur grise.

Autoradio avec prises ISO :

Déconnectez les faisceaux audio et alimentation

de l’autoradio

Reliez les connecteurs femelles du câble mute

et du câble d’alimentation à l’autoradio

Reliez les faisceaux audio et alimentation du

véhicule aux connecteurs mâles.

Boîtier électronique :

N’installez pas le boîtier près du chauffage ou de

la climatisation.

Protégez le boîtier d’une exposition directe au

soleil.

Evitez d’enfermer le boîtier entre des parois

métalliques qui altèreraient la qualité de la liaison

Bluetooth®.

Microphone :

Le microphone doit être dirigé vers le conducteur

et installé de préférence entre le pare soleil et le

rétroviseur intérieur.

Clavier :

Nous vous conseillons de l’installer à

un endroit facilement accessible, de

préférence sur une surface plane

nettoyée auparavant.

Reliez le clavier au connecteur prévu à cet effet

sur le câble mute. Vérifiez que les voyants rouge

et vert s’allument et s’éteignent selon la position

de la clé de contact.

MONTAGE

Si votre Parrot EVOLUTION est installé par un professionnel,

passez directement au chapitre suivant, la phase de Jumelage.

Le Parrot EVOLUTION se compose d’un boîtier électronique,

d’un microphone, d’une télécommande à 2 touches et deux

faisceaux de connexion ISO pour l’autoradio.

ATTENTION

Guide de l’utilisateur

18

CK3000 EVOLUTION

ATTENTION

- Le fil rouge du câble d’alimentation doit être

connecté au 12V permanent, le fil orange au 12V

après-contact et le fil noir à la masse.

- Vérifiez le schéma électrique du faisceau

d’alimentation ISO de l’autoradio.

- Sur certains véhicules, il est nécessaire d’inverser

les positions des fils rouge et orange.

Cette opération s’effectue simplement en inversant

les porte-fusibles.

- Ne connectez pas le fil orange au 12V permanent,

vous risqueriez de provoquer la décharge de la

batterie du véhicule.

Si l’autoradio est équipée d’une entrée Mute, reliez le fil jaune

du câble mute à l’une des entrées « Mute in « 1, 2 ou 3.

Consultez la documentation de l’autoradio pour déterminer la

position de l’entrée mute.

Autoradio sans prise ISO :

Vous pouvez utiliser un faisceau d’adaptation spécifique au

véhicule (non fourni)

Si vous ne disposez pas d’un adaptateur, réalisez un montage

fil à fil si la connectique du véhicule n’est pas ISO.

Si l’autoradio possède une entrée « mute «, effectuez la

connexion avec le fil jaune du câble mute.

SCHÉMA DE MONTAGE

Guide de l’utilisateur

English

CK3000 EVOLUTION

FrançaisEspañolItalianoNederlands

Português

19

Choix de la langue lors de la 1ère utilisation

 Appuyez sur le bouton central en laissant le doigt appuyé 2

s (clic long). Le kit annonce la langue en cours d’utilisation par

le kit

 Lorsque vous tourner la molette le kit énonce les langues

disponibles (Anglais, Français, Espagnol, Italien, Hollandais,

Portugais)

 Une fois que vous avez entendu la langue qui vous inté-

resse, valider en appuyant rapidement sur le bouton central

(clic court)

Lors de la première mise sous tension, il est nécessaire de

jumeler votre téléphone avec le kit mains-libres.

 Une fois détecté, «Parrot EVOL» s’affiche sur votre télé-

phone.

 Sélectionnez-le

Jumelage

Pour plus d’informations, référez vous à la notice de

votre téléphone (Chapitre jumelage) ou rendez-vous

sur le site www.parrot.biz

http://www.parrot.biz/guide_chm/evolution/index.

html

Sur la gauche de l’écran, cliquez sur la rubrique

Bluetooth phones : en choisissant le téléphone

que vous souhaitez, vous accédez à toute les

procédures de paramétrage.

JUMELAGE

 Entrez le code de liaison 1234 quand votre téléphone vous

y invite puis validez.

Le Parrot EVOLUTION se connecte alors à votre téléphone.

Les menus sont désormais accessibles quand vous cliquez

sur la molette centrale et leur nom est énoncé par le kit mains-

libres lorsque vous tournez cette molette.

Dès lors vous êtes connecté au kit mains-libres et pouvez

l’utiliser pour communiquer

Passer un appel manuellement

 Composez le numéro en utilisant le clavier du téléphone

 La conversation passe automatiquement en mode mains-

libres

Recevoir un appel :

 Appuyez sur le bouton vert du kit mains-libres pour

décrocher.

 Appuyez sur le bouton rouge du kit mains-libres si vous

souhaitez refuser l’appel

Raccrocher :

 Appuyez sur le bouton rouge du kit mains-libres pour

raccrocher.

Messagerie :

Vous avez la possibilité d’accéder aux fonctions de votre

messagerie depuis le kit mains-libres.

 Appelez votre messagerie.

 Lorsque vous entendez les messages, cliquez rapidement

(clic court) sur la molette centrale.

Le kit prononce “0”

Première utilisation

Guide de l’utilisateur

20

CK3000 EVOLUTION

 Tournez alors la molette jusqu’à ce que vous entendiez le

numéro souhaité (1, 2, 3.. )

 Validez en appuyant sur la molette.

Fonction Bis :

 Appuyez longuement (clic long : + de 2 s) sur la touche

verte du kit mains-libres pour rappeler le dernier numéro

composé.

Volume en communication :

 Pendant la communication, réglez le volume en tournant la

molette centrale

Passer un appel en reconnaissance vocale

*

 Appuyez sur le bouton vert

 Attendez le bip

 Prononcez le nom de votre correspondant

* Cette fonction est uniquement disponible sur certains téléphones

“French”

“English”

“Italiano”

“Spanish”

“Portuguese”

“Dutch”

La page est en cours de chargement...

Parrot CK3000 EVOLUTION Manuel utilisateur

Parrot CK3000 EVOLUTION Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents