LG 49LX774H Le manuel du propriétaire

www.lg.com

Please read this manual carefully before operating

your TV and retain it for future reference.

40LX770H

43LX770H

49LX770H

55LX770H

65LX770H

40LX774H

43LX774H

49LX774H

55LX774H

49UX970H

55UX970H

65UX970H

79UX970H

Safety and Reference

OWNER’S MANUAL

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Printed in Korea

P/NO : MFL68925833 (1912-REV03)

*MFL68925833*

2

ENGLISH

Important Safety Instructions

Always comply with the following precautions

to avoid dangerous situations and ensure peak

performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol within an equilateral triangle is

intended to alert the user to the presence of

uninsulated dangerous voltage within the

product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended to alert the

user to the presence of important operating

and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may

be seriously injured or there is a possibility of

accident or death.

CAUTION

If you ignore the caution message, you may

be slightly injured or the product may be

damaged.

NOTE

The note helps you understand and use the

product safely. Please read the note carefully

before using the product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth .

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade or

the third prong are provided for your safety. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

• Only use attachments/accessories specified by

the manufacturer.

3

ENGLISH

• Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

• Unplug this apparatus during lightning storms

or when unused for long periods of time.

• Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

• Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil, or

pen, or make a scratch on it.

• Do not stick metal objects or any other

conductive material into the power cord. Do

not touch the end of the power cord while it is

plugged in.

• Keep the packing anti-moisture material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if swallowed.

If swallowed, induce vomiting and go to the

nearest hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach of

children.

• CAUTION concerning the Power Cord

(Can differ by country):

Check the specification page of this owner’s

manual to be certain. Do not connect too many

appliances to the same AC power outlet as this

could result in fire or electric shock. Do not

overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords,

frayed power cords, or damaged or cracked

wire insulation are dangerous. Any of these

conditions could result in electric shock or fire.

Periodically examine the cord of your appliance,

and if its appearance indicates damage or

deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with

an exact replacement part by an authorized

service. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. Do

not move the TV with the power cord plugged

in. Do not use a damaged or loose power cord.

Be sure do grasp the plug when unplugging the

power cord. Do not pull on the power cord to

unplug the TV.

• Warning - To reduce the risk of fire or electrical

shock, do not expose this product to rain,

moisture or other liquids. Do not touch the TV

with wet hands. Do not install this product near

flammable objects such as gasoline or candles,

or expose the TV to direct air conditioning.

• Do not expose to dripping or splashing and

do not place objects filled with liquids, such as

vases, cups, etc. on or over the apparatus (e.g.,

on shelves above the unit).

4

ENGLISH

• Grounding

(Except for devices which are not grounded.)

Ensure that you connect the earth ground wire

to prevent possible electric shock (i.e., a TV

with a three-prong grounded AC plug must

be connected to a three-prong grounded AC

outlet). If grounding methods are not possible,

have a qualified electrician install a separate

circuit breaker. Do not try to ground the unit by

connecting it to telephone wires, lightning rods,

or gas pipes.

Circuit

Breaker

Power

Supply

• As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if the unit is turned off.

• Do not attempt to modify this product in any

way without written authorization from LG

Electronics. Unauthorized modification could

void the user’s authority to operate this product.

• Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the

precautions below. An outdoor antenna system

should not be located in the vicinity of overhead

power lines or other electric light or power

circuits, or where it can come in contact with

such power lines or circuits as death or serious

injury can occur. Be sure the antenna system is

grounded to provide some protection against

voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC)

in the U.S.A. provides information with respect

to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code

• Cleaning

When cleaning, unplug the power cord and wipe

gently with a soft cloth to prevent scratching. Do

not spray water or other liquids directly on the

TV as electric shock may occur. Do not clean with

chemicals such as alcohol, thinners, or benzene.

• Moving

Make sure the product is turned off, unplugged,

and all cables have been removed. It may take 2

or more people to carry larger TVs. Do not press

or put stress on the front panel of the TV.

• Ventilation

Install your TV where there is proper ventilation.

Do not install in a confined space such as a

bookcase. Do not cover the product with cloth or

other materials while plugged. Do not install in

excessively dusty places.

• If you smell smoke or other odors coming from

the TV, unplug the power cord and contact an

authorized service center.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during a

lightning storm.

• When mounting a TV on the wall, make sure not

to install the TV by hanging the power and signal

cables on the back of the TV.

• Do not allow an impact shock, any objects to fall

into the product, and do not drop anything onto

the screen.

• DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The power plug is the disconnecting device.

In case of an emergency, the power plug must

remain readily accessible.

• Batteries

Store the accessories (battery, etc.) in a safe

location out of the reach of children.

• This apparatus uses batteries. In your community

there might be regulations that require you

to dispose of these batteries properly due to

environmental considerations. Please contact

your local authorities for disposal or recycling

information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow the

batteries to overheat.

• Do not use high voltage electrical equipment

near the TV, (e.g., a bug zapper.)

This may result in product malfunction.

5

ENGLISH

• Dot Defect

The panel is a high technology product with

resolution of two million to six million pixels.

In a very few cases, you could see fine dots on

the screen while you’re viewing the TV. Those

dots are deactivated pixels and do not affect the

performance and reliability of the TV.

• Generated Sound

Cracking noise A cracking noise that occurs

when watching or turning off the TV is

generated by plastic thermal contraction due to

temperature and humidity. This noise is common

for products where thermal deformation is

required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a high-

speed switching circuit, which supplies a large

amount of current to operate a product. It varies

depending upon the product. This generated

sound does not affect the performance and

reliability of the product.

• Take care not to touch the ventilation openings.

When watching the TV for a long period, the

ventilation openings may become hot. This does

not affect the performance of the product or

cause defects in the product.

• Do not install this product on a wall if it could be

exposed to oil or oil mist. This may damage the

product and cause it to fall.

• If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This is

normal; there is nothing wrong with TV. Some

minute dot defects may be visible on the screen,

appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the TV’s

performance. Avoid touching the LCD screen or

holding your finger(s) against it for long periods

of time. Doing so may produce some temporary

distortion effects on the screen.

• If water or another substance enters the product

(like a AC adapter, power cord, TV), disconnect

the power cord and contact the service centre

immediately.

Otherwise, this may result in fire or electric

shock.

• Only use an authorized AC adapter and power

cord approved by LG Electronics. Otherwise, this

may result in fire, electric shock, malfunction or

product deformation.

• Never Disassemble the AC adapter or power

cord.

This may result in fire or electric shock.

• Handle the adapter carefully to avoid dropping

or striking it. An impact could damage the

adapter.

• Displaying a still image for a prolonged period of

time may cause an image sticking.

Avoid displaying a fixed image on the TV screen

for a extended length of time.

6

ENGLISH

FCC Notice

(For USA)

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the

equipment and the receiver.

- Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference and (2) this device must accept any

interference received, including interference that

may cause undesired operation. Any changes

or modifications in construction of this device

which are not expressly approved by the party

responsible for compliance could void the user’s

authority to operate the equipment.

FCC Radio Frequency Interference

Requirements (for UNII devices)

High power radars are allocated as primary users

of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.

These radar stations can cause interference with

and/or damage this device. This device cannot be

co-located with any other transmitter.

FCC RF Radiation Exposure Statement

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be

colocated or operating in conjunction with any

other antenna or transmitter. This equipment

should be installed and operated with minimum

distance 20 cm (7.8 inches) between the radiator

and your body. Users must follow the specific

operating instructions for satisfying RF exposure

compliance.

Industry Canada Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This device contains licence-exempt transmitter(s)/

receiver(s) that comply with Innovation, Science

and Economic Development Canada’s licence-

exempt RSS(s). Operation is subject to the

following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference,

including interference that may cause undesired

operation of the device.

IC Radiation Exposure Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with IC radiation

exposure limits set forth for an uncontrolled

environment. This equipment should be installed

and operated with minimum distance 20 cm (7.8

inches) between the antenna & your body.

NOTE : THE MANUFACTURER IS NOT RESPONSIBLE

FOR ANY RADIO OR TV INTERFERENCE CAUSED

BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD

VOID THE USER’S AUTHORITY TO OPERATE THE

EQUIPMENT.

RSS-247 Requirement

(For Canada)

[For product having the wireless function using 5

GHz frequency bands]

(1) The device for operation in the band 5150–5250

MHz is only for indoor use to reduce the potential

for harmful interference to co-channel mobile

satellite systems;

(2) For devices with detachable antenna(s), the

maximum antenna gain permitted for devices in

the bands 5250-5350 MHz and 5470-5725 MHz

shall be such that the equipment still complies

with the e.i.r.p. limit;

7

ENGLISH

(3) For devices with detachable antenna(s), the

maximum antenna gain permitted for devices in

the band 5725-5850 MHz shall be such that the

equipment still complies with the e.i.r.p. limits as

appropriate; and

(4) [For devices operating in the band 5250-5350

MHz having an e.i.r.p. greater than 200 mW]

Antenna type(s), antenna models(s), and worst-

case tilt angle(s) necessary to remain compliant

with the e.i.r.p. elevation mask requirement set

forth in section 6.2.2.3 of RSS-247 shall be clearly

indicated.

Users should also be advised that high-power

radars are allocated as primary users (i.e. priority

users) of the bands 5250-5350 MHz and 5650-

5850 MHz and that these radars could cause

interference and/or damage to LE-LAN devices.

Note to Cable/TV Installer

(For USA and Canada)

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the

National Electric Code (U.S.A.). The code provides

guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected

to the grounding system of the building, as close

to the point of the cable entry as practical.

Viewing 3D Imaging

(For 3D models)

WARNING

Viewing Environment

• Viewing Time

- When watching 3D content, take 5 to 15 minute

breaks every hour. Viewing 3D content for

a long period of time may cause headache,

dizziness, fatigue, or eye strain.

Those that have a photosensitive

seizure or chronic illness

• Some users may experience a seizure or other

abnormal symptoms when they are exposed

to a flashing light or particular pattern from 3D

content.

• Do not watch 3D videos if you feel nauseous,

are pregnant and/ or have a chronic illness such

as epilepsy, cardiac disorder, or blood pressure

disease, etc.

• 3D Content is not recommended for those who

suffer from stereo blindness or stereo anomaly.

Double images or discomfort in viewing may be

experienced.

• If you have strabismus (cross-eyed), amblyopia

(weak eyesight), or astigmatism, you may have

trouble sensing depth and easily feel fatigue

due to double images. It is advised to take more

frequent breaks than the average adult.

• If your eyesight varies between your right and

left eye, correct your eyesight prior to watching

3D content.

Symptoms which require

discontinuation or refraining from

watching 3D content

• Do not watch 3D content when you feel fatigue

from lack of sleep, overwork, or intoxication.

• When these symptoms are experienced, stop

using/watching 3D content and get enough rest

until the symptom subsides.

- Consult your doctor when the symptoms

persist. Symptoms may include headache,

eyeball pain, dizziness, nausea, palpitation,

blurriness, discomfort, double image, eyestrain,

or fatigue.

8

ENGLISH

CAUTION

Viewing Environment

• Viewing Distance

- Maintain a distance of at least twice the screen’s

diagonal length when watching 3D content.

If you feel discomfort in viewing 3D content,

move further away from the TV.

Viewing Age

• Infants / Children

- Usage/ Viewing 3D content for children under

the age of 5 are prohibited.

- Children under the age of 10 may overreact and

become overly excited because their vision is

in development, for example, trying to touch

the screen or trying to jump into it. Special

monitoring and extra attention is required for

children watching 3D content.

- Children have greater binocular disparity of 3D

presentations than adults because the distance

between the eyes is shorter than one of adults.

Therefore they will perceive more stereoscopic

depth compared to adults for the same 3D

image.

• Teenagers

- Teenagers may be stimulated to light coming

from 3D videos. Advise them not to watch 3D

videos for a long time when they are tired.

• Elderly

- The elderly may perceive less of a 3D effect

than the youth. Do not sit closer to the TV than

the recommended distance.

Cautions when using the 3D glasses

• Only use LG 3D glasses. Otherwise, you may not

be able to view 3D videos properly.

• Do not use 3D glasses instead of your normal

glasses, sunglasses, or protective goggles.

• Using modified 3D glasses may cause eye strain

or image distortion.

• Do not keep your 3D glasses in extremely high or

low temperatures. It will cause deformation.

• The 3D glasses are fragile and are easily

scratched. Use a soft, clean piece of cloth when

wiping the lenses. Do not scratch the lenses of

the 3D glasses with sharp objects or clean/wipe

them with chemicals.

Preparing

NOTE

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual.

• The available menus and options may differ from

the input source or product model that you are

using.

• New features may be added to this TV in the

future.

• The items supplied with your product may vary

depending upon the model.

• Product specifications or contents of this manual

may be changed without prior notice due to

upgrade of product functions.

• For an optimal connection, HDMI cables and USB

devices should have bezels less than 10 mm (0.39

inches) thick and 18 mm (0.7 inches) width.

• Use an extension cable that supports USB 2.0 if

the USB cable or USB flash drive does not fit into

your TV’s USB port.

• Use a certified cable with the HDMI logo

attached. If you do not use a certified HDMI

cable, the screen may not display or a

connection error may occur.

• Recommended HDMI cable types (3 m or less)

- High-Speed HDMI®/™ cable

- High-Speed HDMI®/™ cable with Ethernet

B

A

B

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches)

CAUTION

• Do not use any unapproved items to ensure the

safety and lifespan of the product.

• Any damages or injuries by using unapproved

items are not covered by the warranty.

• Some models appear to have a thin film on the

screen. It is actually part of the screen; do not

remove it.

• When attaching the stand to the TV set, place

the screen facing down on a cushioned table or

flat surface to protect the screen from scratches.

• Make sure that the screws are fastened tightly.

(If they are not fastened securely enough, the TV

may tilt forward after being installed.)

• Do not fasten the screws with excessive force;

otherwise, they may be worn out and become

loose.

9

ENGLISH

Warning when using USB storage devices

• USB storage devices with a built-in auto

recognition program or its own driver may not

work.

• Some USB storage devices may not work or may

work improperly.

• Use only those USB storage devices formatted

with FAT32 or NTFS File System provided by

Windows.

• For external USB HDD, use devices with less than

5V-rated voltages and 500 mA-rated current.

• It is recommended to use USB flash drive with

32 GB or less and USB HDD with 2 TB or less.

• If a USB HDD with power-saving function does

not work properly, turn the power off and on.

For more information, refer to the user manual

of USB HDD.

• Data in the USB storage device can be damaged

so back up important files in other devices.

Data maintenance is the user’s responsibility.

The manufacturer is not responsible for data loss.

Optional Extras

Optional extras can be changed or modified for

quality improvement without any notification.

Contact your dealer for buying these items.

These devices work only with certain models.

The model name or design may be changed due to

the manufacturer’s circumstances or policies.

(Depending upon model)

AG-F***

Cinema 3D

Glasses

AN-MR6**

Magic Remote

AN-VC550

Smart Camera

Maintenance

Cleaning Your TV

Clean your TV regularly to keep it at peak

performance and to extend the product’s lifespan.

CAUTION

• Before cleaning, turn the power off and

disconnect the power cord and all other cables.

• When the TV is left unattended or unused for a

long time, disconnect the power cord from the

wall outlet to prevent possible damage from

lightning or power surges.

Screen, Frame, Cabinet, and Stand

To remove dust or light dirt, wipe the surface with

a dry, clean, and soft cloth.

To remove major dirt, wipe the surface with a soft

cloth dampened in clean water or a diluted mild

detergent. Then wipe immediately with a dry cloth.

CAUTION

• Do not push, rub, or hit the surface with your

fingernail or a sharp object, as this may result in

scratches on the screen and image distortions.

• Do not use any chemicals, such as waxes,

benzene, alcohol, thinners, insecticides, air

fresheners, or lubricants, as these may damage

the screen’s finish and cause discoloration.

• Do not spray liquid onto the surface. If water

enters the TV, it may result in fire, electric shock,

or malfunction.

Power Cord

Remove the accumulated dust or dirt on the power

cord regularly.

10

ENGLISH

Lifting and Moving the TV

When moving or lifting the TV, read the following

to prevent the TV from being scratched or

damaged and for safe transportation regardless of

its type and size.

• It is recommended to move the TV in the box or

packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the

power cord and all cables.

• When holding the TV, the screen

should face away from you to

avoid damage.

• Hold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part,

speaker, or speaker grille area.

• Use at least two people to move

a large TV.

• When transporting the TV by

hand, hold the TV as shown in the

following illustration.

• When transporting the TV, do not expose the TV

to jolts or excessive vibration.

• When transporting the TV, keep the TV upright;

never turn the TV on its side or tilt towards the

left or right.

CAUTION

• Avoid touching the screen at all times, as this

may result in damage to the screen.

• Do not place the product on the floor with its

front facing down without padding. Failure to do

so may result in damage to the screen.

• Do not move the TV by holding the cable

holders, as the cable holders may break, and

injuries and damage to the TV may occur.

(Depending upon model)

Using the Joystick Button

(Depending upon model)

(Image shown may differ from your TV.)

You can operate the TV by pressing the button or

moving the joystick left, right, up, or down.

Joystick Button

Basic Functions

When the TV is turned off, place your

finger on the joystick button, press it

once, and release it.

Power On

When the TV is turned on, place your

finger on the joystick button, press it

once for a few seconds, and release it. All

running apps will close.

Power Off

Place your finger on the joystick button

and move it left or right to adjust the

volume level.

Volume

Control

Place your finger on the joystick button

and move it up or down to adjust the

channel.

Channels

Control

NOTE

• Move the joystick button up, down, left, or right.

Be careful not to press it. If you press it first, you

may not be able to adjust the volume or scroll

through the channels.

Adjusting the Menu

When the TV is turned on, press the joystick button

one time. You can adjust the menu items moving

the joystick button up, down, left, or right.

Turns the power off.

Accesses the quick settings.

Clears on-screen displays and returns to TV viewing

Changes the input source.

11

ENGLISH

Mounting on a Table

(Image shown may differ from your TV.)

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (4 inches) (minimum) space

from the wall for proper ventilation.

10 cm

(4 inches)

2 Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources of heat,

as this may result in fire or other damage.

Adjusting the Angle of the TV

to Suit View

(Depending upon model)

Swivel 20 degrees to the left or right and adjust the

angle of the TV to suit your view.

20˚20˚

CAUTION

• When adjusting the angle of the TV, watch out

for your fingers.

- Personal injury may occur if hands or fingers are

pinched. If the product is tilted too much, it may

fall, causing damage or injury.

Attaching the TV to a desk

(optional)

(Depending upon model)

The TV should be attached to a desk so it cannot

be pulled in a forward/backward direction,

potentially causing injury or damaging the

product.

[TYPE 1]

4-Screws

(Not provided as parts of the product)

Desk

Stand

NOTE

• Screw: M5 x L (*L: Table depth + 8~10 mm)

ex) Table depth: 15 mm, Screw: M5 x L25

12

ENGLISH

[TYPE 2]

2-Screws, 2-Washers, 2-Nuts

(provided as parts of the product)

Desk

Stand

Using the kensington security

system

(Depending upon model)

(Image shown may differ from your TV.)

The Kensington security system connector is

located at the rear or stand of the TV. For more

information of installation and using, refer to the

manual provided with the Kensington security

system or visit http://www.kensington.com.

Connect the Kensington security system cable

between the TV and a table.

NOTE

• The Kensington security system is optional. You

can obtain additional accessories from your local

dealer.

Securing the TV to a Wall

(optional)

(Depending upon model)

1 Insert and tighten the eye-bolts or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and

the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope or cable. Make sure to keep

the rope parallel to the flat surface.

CAUTION

• Make sure that children do not climb on or hang

on the TV.

NOTE

• Use a platform or cabinet that is strong and large

enough to support the TV securely.

• Brackets, bolts, and ropes are optional. You can

obtain additional accessories from your local

dealer.

Mounting on a Wall

An optional wall mount can be used with your

LG Television. Consult with your local dealer for

a wall mount that supports the VESA standard

used by your TV model. Carefully attach the wall

mount bracket at the rear of the TV. Install the wall

mount bracket on a solid wall perpendicular to the

floor. If you are attaching the TV to other building

materials, please contact qualified personnel to

install the wall mount. Detailed instructions will

be included with the wall mount. We recommend

that you use an LG brand wall mount. The LG wall

mount is easy to adjust or to connect the cables.

13

ENGLISH

When you do not use LG’s wall mount bracket,

use a wall mount bracket where the device is

adequately secured to the wall with enough space

to allow connectivity to external devices. If you are

using a non-adjustable mount, attach the mount

to the wall. Attach the cables to the TV first, then

attach the TV to the mount.

10 cm

(4 inches)

Make sure to use screws and wall mounts that

meet the VESA standard. Standard dimensions for

the wall mount kits are described in the following

table.

Model

40/43LX770H

40/43LX774H

49/55LX770H

49/55LX774H

49/55UX970H

VESA (A x B) 200 x 200 300 x 300

Standard screw M6 M6

Number of screws 4 4

Wall mount bracket

(optional)

LSW240B

MSW240

LSW350B

MSW240

Model

65LX770H

65UX970H

79UX970H

VESA (A x B) 300 x 300 600 x 400

Standard screw M6 M8

Number of screws 4

4

Wall mount bracket

(optional)

LSW350B

LSW640B

A

B

CAUTION

• Disconnect the power before moving or

installing the TV. Otherwise electric shock may

occur.

• Remove the stand before installing the TV on a

wall mount by performing the stand attachment

in reverse.

• If you install the TV on a ceiling or slanted wall,

it may fall and result in severe injury. Use an

authorized LG wall mount and contact the local

dealer or qualified personnel. When using a

third-party wall mount, it is not covered by the

warranty.

• Do not over tighten the screws as this may cause

damage to the TV and void your warranty.

• Use the screws and wall mounts that meet the

VESA standard. Any damages or injuries by

misuse or using an improper accessory are not

covered by the warranty.

NOTE

• Use the screws that are listed in the VESA

standard screw specifications.

• The wall mount kit includes an installation

manual and necessary parts.

• The wall mount bracket is optional. You can

obtain additional accessories from your local

dealer.

• The length of screws may differ depending upon

the wall mount. Make sure to use the proper

length.

• For more information, refer to the manual

supplied with the wall mount.

• When using the wall mounting bracket, apply

the adhesive protective label to cover the

unused stand opening(s). This will prevent the

accumulation of dust and dirt. (Do this only

when the labels are provided with your model.)

Provided Item

Adhesive protective label

• Depending upon the shape of the stand, use a

flat tool to remove the stand cover as illustrated

below. (e.g., a flat screwdriver) (For 79UX970H)

14

ENGLISH

Connections (Notifications)

You can connect various external devices to the TV.

Supported external devices are: HD receivers, DVD

players, VCRs, audio systems, USB storage devices,

PC, gaming devices, and other external devices. For

more information on external device’s connection,

refer to the manual provided with each device.

NOTE

• This model supports 4K (ULTRA HD) videos only

in HDMI input. (For UX970H series)

• ULTRA HD videos are not supported in the tuner

or USB input. (For UX970H series)

• The external device connections shown may

differ slightly from illustrations in a manual.

• Connect external devices to the TV regardless

about the order of the TV port.

• If you connect a gaming device to the TV, use the

cable supplied with the gaming device.

• Refer to the external equipment’s manual for

operating instructions.

Connecting to an Antenna or

Cable

Connect an antenna, cable, or cable box to watch

TV while referring to the following. The illustrations

may differ from the actual items and an RF cable is

optional.

CAUTION

• Make sure not to bend the copper wire of the RF

cable.

Copper wire

• Complete all connections between devices, and

then connect the power cord to the power outlet

to prevent damage to your TV.

NOTE

• Use a signal splitter to use 2 TVs or more.

• DTV Audio Supported Codec: MPEG,

Dolby Digital.

• Direct ULTRA HD broadcast is unavailable in

areas without a ULTRA HD signal. (For UX970H

series)

Other Connections

Connect your TV to external devices. For the best

picture and audio quality, connect the external

device and the TV with the HDMI cable.

NOTE

• Use only with the 3-pole 3.5 mm stereo jack.

• Do not connect your headphones or earphones

to the port for connecting an external speaker.

Remote Control

(Image shown may differ from your TV.)

The descriptions in this manual are based on

the buttons on the remote control. Please read

this manual carefully and use the TV correctly. To

install batteries, open the battery cover, replace

batteries (1.5 V AAA) matching the and ends

to the label inside the compartment, and close

the battery cover. Failure to match the correct

polarities of the battery may cause the battery

to burst or leak, resulting in fire, personal injury,

or ambient pollution. To remove the batteries,

perform the installation actions in reverse. This

remote uses infrared light. When in use, it should

be pointed in the direction of the TV’s remote

sensor.

CAUTION

• Do not mix old and new batteries, as this may

damage the remote control.

15

ENGLISH

CH

123

456

78

0

9

P

A

G

E

SMART

INPUT

CHAR/NUM

FLASHBK

EXIT

OK

GUIDE

PORTAL

TV

DVD

TIMER

CC

VD/

MUTE

INFO

MENU

SETTINGS

abc def

ghi jkl mno

pqrs tuv wxyz

.,;

@

DELETE

ENTER

VOL

A

B

A

(POWER) Turns the TV on or off.

Accesses the Smart menu.

Selects the remote’s operating mode: TV.

Selects the remote’s operating mode: DVD.

Changes the input source.

Turns the TV off in a set amount of time.

B

Number button Enters numbers. Also supports

characters.

(DASH) Inserts a dash between numbers such as

2-1 and 2-2.

Tunes to the last channel or input viewed.

Adjusts the volume level.

Switches between Letter and Number

input modes.

Selects a closed caption.

Enables VD function. SAP (Secondary Audio

Program) feature can also be enabled by pressing

the VD key.

Deletes letters and numbers.

Mutes all sounds.

Scrolls through the saved channels.

Moves to the previous or next screen.

CH

123

456

78

0

9

P

A

G

E

SMART

INPUT

CHAR/NUM

FLASHBK

EXIT

OK

GUIDE

PORTAL

TV

DVD

TIMER

CC

VD/

MUTE

INFO

MENU

SETTINGS

abc def

ghi jkl mno

pqrs tuv wxyz

.,;

@

DELETE

ENTER

VOL

C

D

C

Displays and removes the interactive

menu.

Views the information of the current

program.

Displays and removes the electronic

program guide of Pro:Centric Application.

Navigation button (up/down/left/right) Scrolls

through menus or options.

/ Selects menus or options and

confirms your input.

(BACK ) Returns to the previous screen.

/ Accesses the quick settings.

Clears all on-screen displays and returns to TV

viewing.

D

Color buttons These access special functions in

some menus. ( Red, Green, Yellow, Blue)

Control buttons ( ) Control buttons

for media contents.

Feature can only be enabled or disabled

by installer menu settings. Configuration of this

feature is not supported on TV remote control.

, , , , Not functional.

Used for viewing 3D video. (For 3D models)

16

ENGLISH

To select Picture Mode

MENU / SETTINGS ➙ PICTURE ➙ Picture Mode

Select the picture mode optimized for the viewing

environment or the program.

• Vivid Heightens contrast, brightness and

sharpness to display vivid images.

• Standard Displays images in standard levels of

contrast, brightness and sharpness.

• APS APS ( Auto power saving ) mode reduces

power consumption by dimming control.

• Cinema / Sports / Game / Photo Displays the

optimum picture for movie, Sports, game or

photo.

• Expert Menu for adjusting picture quality that

allows experts and amateurs to enjoy the best TV

viewing. This menu for adjustment is provided

for ISF-certified picture tuning professionals.

(ISF logo can only be used on ISF-certified TVs.)

ISFccc: Imaging Science Foundation Certified

Calibration Control

• Depending upon input signal, available range of

picture modes may differ.

• Expert mode is for picture tuning professionals

to control and fine-tune using a specific image.

For normal images, the effects may not be

drastic.

To use HDMI ULTRA HD Deep

Color (For UX970H series)

MENU / SETTINGS ➙ ➙ PICTURE ➙

HDMI ULTRA HD DEEP COLOR:

- On: Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off: Support 4K @ 60 Hz (4:2:0)

• If the device connected to Input Port also

supports ULTRA HD Deep Color, your picture

may be clearer. However, if the device doesn’t

support it, it may not work properly. In that case,

connect the device to a different HDMI port or

change the TV’s HDMI ULTRA HD Deep Color

setting to Off.

- This feature is available only on certain models

which support HDMI ULTRA HD Deep Color.

Specifications

Product specifications may be changed without

prior notice due to upgrade of product functions.

Television System

ATSC, NTSC-M, 64 & 256 QAM

Program Coverage

VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135,

CADTV 1-135

External Antenna Impedance

75 Ω

Environment Condition

• Operating Temperature

0 °C to 40 °C (32 °F to 104 °F)

• Operating Humidity

Less than 80 %

• Storage Temperature

-20 °C to 60 °C (-4 °F to 140 °F)

• Storage Humidity

Less than 85 %

Wireless Module (LGSBW41)

Specifications

Wireless LAN Bluetooth

Standard IEEE 802.11a/b/g/n Standard

Bluetooth

Version

4.0

Frequency

range

2400 to 2483.5 MHz

5150 to 5250 MHz

5725 to 5850 MHz

Frequency

range

2400 to

2483.5

MHz

Output

power

(Max.)

802.11a: 11.5 dBm

802.11b: 11 dBm

802.11g: 10.5 dBm

802.11n - 2.4 GHz:

11 dBm

802.11n - 5 GHz:

12.5 dBm

Output

power

(Max.)

10 dBm or

Lower

• Because band channel used by the country could

be different, the user can not change or adjust the

operating frequency and this product is set for the

regional frequency table.

• This device should be installed and operated with

minimum distance 20 cm (7.8 inches) between

the device and your body. And this phrase is for

the general statement for consideration of user

environment.

• Contains FCC ID: BEJLGSBW41 /

Contains IC: 2703H-LGSBW41

17

ENGLISH

HDMI (PC) Supported Mode

Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

640 x 350 31.46 70.09

720 x 400 31.46 70.08

640 x 480 31.46 59.94

800 x 600 37.87 60.31

1024 x 768 48.36 60.00

1152 x 864 54.34 60.05

1280 x 1024 63.98 60.02

1360 x 768 47.71 60.01

1920 x 1080 67.50 60.00

3840 x 2160 67.50 30.00

3840 x 2160 56.25 25.00

3840 x 2160 54.00 24.00

4096 x 2160 53.95 23.97

4096 x 2160 54.00 24.00

HDMI (DTV) Supported Mode

Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

640 x 480p

31.46 59.94

31.50 60.00

720 x 480p

31.47 59.94

31.50 60.00

1280 x 720p

44.96 59.94

45.00 60.00

1920 x 1080i

33.72 59.94

33.75 60.00

1920 x 1080p

26.97 23.97

27.00 24.00

33.71 29.97

33.75 30.00

67.43 59.94

67.50 60.00

3840 x 2160p

53.95 23.98

54.00 24.00

56.25 25.00

61.43 29.97

67.50 30.00

135.00 60.00

135.00 59.94

4096 x 2160p

53.95 23.98

54.00 24.00

56.25 25.00

61.43 29.97

67.50 30.00

135.00 60.00

135.00 59.94

Component Port Connecting

Information

Component ports on the TV Y P

B

P

R

Video output ports on DVD player

Y P

B

P

R

Y B-Y R-Y

Y Cb Cr

Y Pb Pr

Component Supported Mode

Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

720 x 480i

15.73 60.00

15.73 59.94

720 x 480p

31.50 60.00

31.47 59.94

1280 x 720p

45.00 60.00

44.96 59.94

1920 x 1080i

33.75 60.00

33.72 59.94

1920 x 1080p

67.50 60.00

67.432 59.94

Supported Video Formats

Extenstion Codec

.asf

.wmv

Video

VC-1 Advanced Profile

(WMVA excluded),

VC-1 Simple and Main Profiles

Audio

WMA Standard

(WMA v1/WMA Speech excluded),

WMA 9 Professional

.divx

1

.avi

Video

DivX3.11, DivX4, DivX5, DivX6,

XViD(except 3 warp-point GMC),

H.264/AVC, Motion Jpeg, MPEG-4

Audio

MPEG-1 Layer I, II,

MPEG-1 Layer III (MP3),

Dolby Digital, LPCM, ADPCM, DTS

.mp4

.m4v

.mov

Video H.264/AVC, MPEG-4, HEVC

Audio AAC, MPEG-1 Layer III (MP3)

.3gp

.3g2

Video H.264/AVC, MPEG-4

Audio AAC, AMR-NB, AMR-WB

.mkv

Video

MPEG-2, MPEG-4, H.264/AVC, VP8,

VP9, HEVC

Audio

Dolby Digital, PCM, DTS,

MPEG-1 Layer I, II,

MPEG-1 Layer III (MP3), AAC

.ts

.trp

.tp

.mts

Video H.264/AVC, MPEG-2, HEVC

Audio

MPEG-1 Layer I, II,

MPEG-1 Layer III (MP3),

Dolby Digital, Dolby Digital Plus,

AAC, PCM

.mpg

.mpeg

.dat

Video MPEG-1, MPEG-2

Audio

MPEG-1 Layer I, II,

MPEG-1 Layer III (MP3)

For UX970H series

18

ENGLISH

.vob

Video MPEG-1, MPEG-2

Audio

Dolby Digital, MPEG-1 Layer I, II,

DVD-LPCM

.rm

.rmvb

Video RV30, RV40

Audio Realaudio6 (cook), AAC LC, HE-AAC

• This feature is available in certain

countries only.

1 : For LX770H, UX970H series

Supported Audio Formats

File Format Item Info

.mp3

Bit rate

32 Kbps - 320 Kbps

Sample freq. 16 kHz - 48 kHz

Support MPEG1, MPEG2

Channels mono, stereo

.wav

Sample freq. ~384 kHz

Support PCM

Channels mono, stereo

.ogg

Bit rate 64 Kbps - 500 Kbps

Sample freq. 8 kHz - 48 kHz

Support Vorbis

Channels mono, stereo

.wma

Bit rate - 1.5 Mbps

Sample freq. 8 kHz - 192 kHz

Support WMA

Channels up to 6 ch

• The number of supported programs may vary

depending upon the sample frequency.

Supported Photo Formats

File Format Format Resolution

.jpeg, .jpg,

.jpe

JPEG

Minimum: 64 x 64

Maximum: 15360 (W) x 8640 (H) /

Progressive Type: 1920 (W) x 1440 (H)

.png PNG

Minimum: 64 x 64

Maximum: 5760 (W) x 5760 (H)

.bmp BMP

Minimum: 64 x 64

Maximum: 1920 (W) x 1080 (H)

.jps JPS

Minimum: 64 x 64

Maximum: 15360 (W) x 8640 (H)

.mpo MPO

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL,

and other open source licenses, that is contained

in this product,

please visit

http://opensource.lge.com

. In addition

to the source code, all referred license terms,

warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code

to you on CD-ROM for a charge covering the cost

of performing such distribution (such as the cost of

media, shipping, and handling) upon email request

to

[email protected]om

. This offer is valid for a

period of three years after our last shipment of this

product. This offer is valid to anyone in receipt of

this information.

Troubleshooting

The software may be updated for improvement

in performance. The customer is responsible to

ensure the compatibility of their equipment with

any LG Electronics software. If needed, please

consult with LG Electronics and update new

software versions according to the guidance

provided by LG Electronics.

• Cannot control the TV with the remote control.

- Check if anything such as tape has been placed

over the receiver.

- Check if there is any obstacle between the

product and the remote control.

- Replace the batteries with new fresh ones.

• No image display and no sound is produced.

- Check if the product is turned on.

- Check if the power cord is connected to a wall

outlet.

- Check if there is a problem in the wall outlet by

connecting other products.

• The TV turns off suddenly.

- Check the power control settings.

The power supply may be interrupted.

- Check if the Timer Power Off / Sleep Timer

feature is activated in the TIMERS settings.

- If there is no signal while the TV is on, the TV

will turn off automatically after 15 minutes of

inactivity.

For 3D models

19

ENGLISH

Licenses

Supported licenses may differ by model.

For more information about licenses,

visit

www.lg.com

.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI logo are

trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other

countries.

(For series of LX770H, UX970H)

This DivX Certified® device has passed rigorous

testing to ensure it plays DivX® video.

To play purchased DivX movies, first register your

device at vod.divx.com. Find your registration

code in the DivX VOD section of your device

setup menu.

DivX Certified® to play DivX® video up to HD

1080p, including premium content.

DivX®, DivX Certified® and associated logos are

trademarks of DivX, LLC and are used under

license.

Covered by DivX Patents 7,295,673;7,515,710;

RE45,052; and others available at [www.divx.

com/patents]

For DTS patents, see

http://patents.dts.com

.

Manufactured under license from DTS Licensing

Limited. DTS, DTS-HD, the Symbol, & DTS and the

Symbol together are registered trademarks of

Declaration of Conformity

Trade Name: LG

Model: 40LX770H-UA, 43LX770H-UA, 49LX770H-UA,

55LX770H-UA, 65LX770H-UA, 40LX774H-UA,

43LX774H-UA, 49LX774H-UA, 55LX774H-UA,

49UX970H-UA, 55UX970H-UA, 65UX970H-UA,

79UX970H-UA

Responsible Party: LG Electronics Inc.

Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A

TEL: 201-266-2534

The model and serial numbers of the TV are located on

the back and on one side of the TV. Record them below

should you ever need service.

MODEL

SERIAL

LG Customer Information Center

For inquires or comments, visit www.lg.com or call;

1-855-286-2456 CANADA

1-888-865-3026 USA, Commercial User

La page charge ...

LG 49LX774H Le manuel du propriétaire

Ce manuel convient également à

LG 49LX774H Le manuel du propriétaire

dans d''autres langues

Documents connexes