Haier Car Satellite TV System LE46D2380 Manuel utilisateur

Marque: Haier

Modèle: Car Satellite TV System LE46D2380

Catégorie: Téléviseurs

Taper: Manuel utilisateur

Ce manuel convient également à

LED Television

User Manual

MODELS:

LE32D2320

LE39D2380

LE42D2380

LE46D2380

English

Energy Star

This product qualifies for ENERGY STAR in the factory default setting and this is the

setting in which power savings will be achieved.Changing the factory default picture

setting or enabling other features will increase power consumption that could exceed

the limits necessary to quality for ENERGY STAR rating.

SYMBOL SYMBOL DEFINITION

SA 1965

DANGEROUS VOLTAGE: The lightning flash with arrowhead

symbol, within an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electrical shock to persons.

SA 1966

INSTRUCTIONS: The exclamation point within on equilateral

triangle to alert the user to the presence of important operating

and maintenance (servicing) instruction in the literature

accompanying the appliance.

Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

Caution - Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type.

Batteries installed warning

Caution - Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type.

The batteries (battery pack or batteries installed) shall not be exposed to

excessive heat such as sunshine, fire or the like.

NOTICE

1. The changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modification to this equipment. It is the responsibilities of the user to

correct such interference.

NOTE:

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy,

and if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

WARNING:

To prevent fire or shock hazard, do not expose the TV to rain or moisture.

Dangerously high voltages are present inside the TV. Do not open the cabinet. Refer

servicing to qualified personnel only.

FOR YOUR SAFETY

Before operating the TV please read this manual thoroughly. This manual should be

retained for future reference.

FCC Class B Radio Frequency Interference Statement

WARNING:

(FOR FCC CERTIFIED MODELS)

English

Place unit on even surfaces.

Unplug immediately if is

malfunction like no picture,

no video/audio, smoke and

bad odor from TV.

Don't throw any object

inside the TV box like

metals or other flammable

materials.

Don't place the TV in

confined spaces or in a box

when using it.

Unplug immediately if other

foreign materials are put

inside TV box or if the TV

fell down.

Prohibit/Avoid opening TV

cabinet.

Remember to unplug the

AC cord from the AC outlet

before cleaning. Do not use

liquid cleaners or aerosol

cleaners to clean the display.

Make sure to unplug the

unit when not in use for a

long period of time (days).

Do not cover or block

any vents and openings.

Inadequate ventilation

may shorten the life of

the display unit and cause

overheating.

Avoid direct sunlight, dusty,

high humidity and smoky

areas

Call service personnel to

clean the internal part of

the TV once a year.

Do not place the display

near water, such as bathtub,

washbasin, kitchen sink

laundry tub, swimming pool

or in a damp basement.

PRECAUTIONS AND REMINDERS

Notice for Remote Control

Avoid Dropping

Avoid Liquids

Avoid Aerosol Cleaners

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and third grounding prong. The wide blade or third prong is provided

for your safety. When the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. The TV should be operated only from the type of power source indicated on the

label. If you are not sure of the type of power supplied to your home, consult your

dealer or local power company.

14. Unplug this apparatus during lightning storms or when unused for long periods of

time.

15. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been

dropped.

16. Class I Protective Earthing Connection – "The Class I apparatus shall be connected

to a mains socket outlet with a protective earthing connection."

17. Disconnect Device - Mains Plug or Appliance Coupler – "The mains plug or appliance

coupler is used as the disconnect device, the disconnect device shall remain readily

operable."

18. Disconnect Device - An all-pole MAINS SWITCH – "An all-pole MAINS SWITCH is

used as the disconnect device, the switch shall remain readily operable."

English

19. Service Instructions – "CAUTION – These servicing instructions are for use by

qualified service personnel only. To reduce the risk of electric shock, do not perform

any servicing other than that contained in the operating instructions unless you are

qualified to do so."

20. Wall Mount Bracket – For use only with UL Listed Wall Mount Bracket with

minimum weight/load: Please see page 30.

21. CONSUMER ALERT – This television receiver has only an analog broadcast

tuner and will require a converter box after June 12 2009,to receive over-the-air

broadcasts with an antenna because of the Nation's transition to digital broadcasting.

Analog-only TVs should continue to work as before with cable and satellite TV

services, gaming consoles, VCRs, DVD players, and similar products, For more

information, call the Federal Communications Commission at 1-888-225-5322 (TTY:

1-888-835-5322)or visit the Commission's digital television website at: www.DTV.

gov.

Information about the DTV transition –after June 12 2009, a television receiver

with only an analog broadcast tuner will require a converter box to receive full

power over the- air broadcasts with an antenna because of the Nation's transition

to digital broadcasting. Analog-only TVs should continue to work as before to

receiver low power, Class A or translator television stations an with cable and

satellite TV services, gaming consoles, VCRs, DVD players, and similar products. For

more information about the DTV transition is available from http://www.DTV.gov

or 1-888-CALL-FCC, and from http://www.dtv2009.gov or 1-888-DTV-2009 for

information about subsidized coupons for digital-to-analog converter boxed.

22. Tilt/Stability – All televisions must comply with recommended international global

safety standards for tilt and stability properties of its cabinets design.

●

Do not compromise these design standards by applying excessive pull force to

the front, or top, of the cabinet, which could ultimately overturn the product.

●

Also, do not endanger yourself, or children, by placing electronic equipment/toys

on the top of the cabinet. Such items could unsuspectingly fall from the top of

the set and cause product damage and/or personal injury.

23. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling

only as recommended by the manufacturer.

24. Power Lines – An outdoor antenna should be located away from power lines.

25. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver,

be sure the antenna system is grounded so as to provide some protection against

voltage surges and built up static charges. Section 810 of the National Electric Code,

ANSI/NFPA No. 70-1984, provides information with respect to proper grounding

of the mats and supporting structure grounding of the lead-in wire to an antenna-

discharge unit, size of grounding connectors, location of antenna discharge unit,

connection to grounding electrodes and requirements for the grounding electrode.

See Figure below.

ANTENNA

ANTENNA DISCHARGE UNIT

GROUNDING CONDUCTORS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

Note to the CATV system installer: This reminder is provided to call the CATV

system installer’s attention to Article 820-40 of the NEC that provides guidelines

for proper grounding and, in particular, specifies that the cable ground shall be

connected to the 6 English grounding system of the building, as close to the point

of cable entry as practical. Please, make sure to connect the power plug to the wall

outlet socket after connecting the TV to the adapter!

26. Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

27. Warning statement indicating that Class I apparatus shall be connected to a mains

socket outlet with a protective earthing connection.

28. Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

29. Statement indicating that when the mains plug or appliance coupler shall remain

readily operable.

30. Where the MAINS plug or an appliance coupler is used as the disconnect device, the

disconnect device shall remain readily operable.

31. Where an all-pole MAINS SWITCH is used as the disconnect device, the location

on the apparatus and the function of the switch shall be described, and the switch

shall remain readily operable.

English

SAVE THESE INSTRUCTIONS

Thank you for purchasing this Haier product. This easy-to-use manual will guide you in getting

the best use of your product. Remember to record the model and serial number. They are on

the label on back of the unit.

Model number

Serial number

Date of purchase

Staple your receipt to your manual. You will need it to obtain warranty service.

TABLE OF CONTENT

FOR YOUR SAFETY ..................................................................................2

PRECAUTIONS AND REMINDERS .....................................................3

IMPORTANT SAFETY INSTRUCTIONS ............................................. 4

PREPARATION ........................................................................................... 9

ATTACHING THE BASE ................................................................................9

PREPARING YOUR LCD HDTV FOR WALL MOUNTING .................9

PERIPHERAL CONNECTION GUIDE ..............................................11

OPERATING INSTRUCTIONS ............................................................ 13

USING THE REAR PANEL CONTROL ................................................... 13

USING THE REMOTE CONTROL ........................................................... 14

INITIAL SETUP.............................................................................................. 16

INPUT SOURCE ........................................................................................... 17

VIDEO ............................................................................................................. 18

AUDIO ............................................................................................................ 19

TV ..................................................................................................................... 20

SETUP .............................................................................................................. 21

PARENTAL .................................................................................................... 23

MEDIA ............................................................................................................. 25

TIPS .................................................................................................................. 27

PRODUCT SPECIFICATION ................................................................29

TROUBLESHOOTING ...........................................................................31

GLOSSARY ................................................................................................ 32

WARRANTY ............................................................................................33

English

IMPORTANT: Do not apply pressure

to the screen display area which may

compromise the integrity of the display.

The manufacturer’s warranty does

not cover user abuse or improper

installations.

ATTACHING THE BASE

IMPORTANT:

The Base of the HDTV

must be assembled prior to usage.

1. Place TV unit face down on a soft

and flat surface (blanket, foam, cloth,

etc.) to prevent any damage to the

HDTV.

2. Carefully align and insert the base

to the neck.

3. Gently push the Base towards the

HDTV until the locking mechanism

locks into place.

4. Fasten the base using the supplied

screws.

PREPARING YOUR LCD HDTV

FOR WALL MOUNTING

We suggest that you keep your TV at

least 2.36 inches (60 mm) from the wall

to prevent cable interference.

Before mounting your TV on the wall,

you need to remove the neck and the

base.

For your safety, please use only with

a UL listed wall mount bracket with

minimum weight of the TV without

stand. (Please see page 30.)

To attach a wall mount bracket to your

TV:

1. Remove the screws holding your

TV to the stand.

2. Remove the neck and the base

from your TV.

3. Secure the wall mount bracket

to the back of your TV using four

screws.

• LE32D2320: 200x100mm;Metric 4x10

• LE39D2380: 200x200mm; Metric 6x10

• LE42D2380/LE46D2380;400x400mm,

Metric 6x10 mm

NOTE



The wall mount bracket and the

screws are not included.

PREPARATION

1. Install the base stand; place the

TV on a solid surface.

Min

1 m

Ensure that the TV is placed in

a position to allow free flow of

air. Do not cover the ventilation

openings on the back cover.

To prevent any unsafe situations, no

naked flame sources, such as lighted

candles, should be placed on or in

the vicinity.

Avoid heat, direct sunlight and

exposure to rain or water. The

equipment shall not be exposed to

dripping or splashing.

2. Connect the antenna cable or cable

TV cable to the aerial socket ANT

IN 75

at the back of the TV set.

3. Remote control:

Remove the cover of the battery

compartment. Insert the 2 batteries

supplied (Type AAA 1.5V).

HTR-D09B

4. Power:

Insert the power cord in the wall

socket with AC power supply.

5. Turn the TV on:

Press the Power key on the remote

control or the power button on

the control panel on the side of the

TV.

Power Key

ZOOM

English

PERIPHERAL CONNECTION GUIDE

1. HDMI – Connect the primary source for digital video such as a DVD

multimedia player or set top box through this all digital connector.

2. PC IN/PC AUDIO – Connect the video and audio cables from a computer

here.

3. AV IN (AV) – Connect the input source for composite video devices, such

as a VCR or video game. Use the white and red connectors to connect the

external audio from the same source.

4. COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the primary source

for component video devices such as a DVD Player or set top box here. Use

red for Pr, blue for Pb, green for Y, red for right audio (R) and white for left

audio (L) inputs.

5. ANTENNA(CABLE DIGITAL/ANALOG) – Connect to an antenna or

digital cable (out-of-the-wall, not from Cable Box) for Digital TV.

6. COAX OUT – When a digital audio signal is associated with the input

selected for viewing, the digital audio will be available on this COAX OUT

connection to your home theater system.

7. USB PORT – Insert a USB storage device to the USB port to view JPEG/

BMP photos, listen to MP3 music. (Please refer to pages 25-26 for more

information.)

8. Earphone Output – Connect to headphones. When headphones are

inserted to the plug, the TV speakers will be muted.

Once your equipment is connected, use the following procedure to view the

input signal:

Press the Source button on the remote control to select the relevant source to

view.

(ex: Press the INPUT button to select “Component” if you have connected a

DVD palyer to Component input.)

English

OPERATING INSTRUCTIONS

USING THE REAR PANEL CONTROL

1. VOL + Press to increase the sound volume.

2. VOL - Press to decrease the sound volume.

3. CH

▲

Press to increase the channel number.

4. CH

▼

Press to decrease the channel number.

5. MENU Press to open or exit the OSD (on-screen display) menu.

6. INPUT Press to select the input source.

POWER

Press to turn on / off (standby) the TV set.

ZOOM

FREEZE

Power

Press to power ON/OFF

(standby) TV.

Note: The TV is never

completely powered

off unless physically

unplugged.

PICTURE

Press to switch the

picture mode.

AUDIO

Press to switch the audio

mode.

ZOOM

Press to switch the display

mode: Normal, Wide,

Cinema, Zoom.

CCD

Press to switch the closed

caption type: CC On/CC

Off/CC On with mute.

MTS/SAP

Press to switch sounds:

SAP, Stereo, Mono for

NTSC TV, or switch audio

language for DTV.

SLEEP

Press to set the sleep

timer (off/10 minutes/20

minutes/30 minutes/40

minutes/50 minutes/60

minutes/90 minutes/120

minutes).

0 ~ 9 / • number

Press to enter a TV

channel number (Press

"." to choose the sub-

channel).

INPUT

Press "INPUT" to open

the Source List.

Press to open or exit the

menu.

MUTE

Switch the sound on/off.

CH+ / CH -

• Menu is displayed:

Press CH+ or CH- to

navigate up or down.

• Menu not displayed:

Press CH+ or CH- to

browse through the TV

channels.

• UP/DOWN Multiplex

CH +/- function.

VOL+ / VOL-

• Menu is displayed:

Press VOL+ or VOL- to

navigate right or left.

• Menu not displayed:

Press VOL+ or VOL- to

adjust volume.

ENTER

Press to confirm a

selection.

EXIT

Press to exit menu or on

screen display (OSD).

USING THE REMOTE CONTROL

English

RECALL

Press to display the previous channel.

DISPLAY

Press to show the information about

the input source, TV channel, display

resolution and current time.

“Display” under TV source, after OSD

disappear,press UP/DOWN to change

the channel.

FREEZE

Press to freeze picture.

FAVORITE

Press to open the Favorite Channel

List.

CH.LIST

Press to display the Channel List.

For Multimedia use only.

USB

Press USB to switch to or exit the USB

multimedia mode.

PLAY/PAUSE

Press to Play/Pause in Multimedia

mode.

STOP



Press to Stop playing in Multimedia

mode.

REPEAT

Press to toggle Repeat On/Off mode in

Music mode.

REV

Press to fast reverse MP3 playback in

Music mode.

FWD

Press to fast forward MP3 playback in

Music mode.

Press to display the previous photo

during the photo slideshow. Press to

play the previous file in Music mode.

Press to return to the thumbnail mode

when playing the first file in the current

directory.

Press to display the next photo during

the photo slideshow. Press to play the

next file in MP3 MusicBox. Press to

return to the thumbnail mode when

playing the last file in the current

directory.

INITIAL SETUP

Welcome

Welcome to use the wizard for initial

Setup!!

Please press [ENTER] to start the

wizard.

Welcome to use the Wizard for Initial Setup!!

Please press [ENTER] to start the wizard.

Initial Setup Welcome

Language

Please select your language, press [CH-]/

[CH+] to select,

press [ENTER] to confirm:

Please select your language:

Initial Setup Language

Español

Français

Back Select Next Exit

English

Time Zone

Please select your time zone, press

[CH-]/[CH+] to select,

press [ENTER] to confirm:

INDIANA

ALASKA

HAWAII

ARIZONA

Atlantic

NEW

foundland

EASTERN

CENTRAL

MOUNTAIN

PACIFIC

Initial Setup

Please select your time zone

Central Time

Mountain Time

Pacific Time

Alaska

Hawaii

Time Zone

Eastern Time

Back Select Next Exit

Tuner Type

Please select your tuner type, press

[CH-]/[CH+]to select,

press [ENTER] to confirm:

Back Select Next Exit

Please select your tuner mode:

Initial Setup Tuner

Cable

Antenna

1. Antenna: Set the signal type to

antenna. When set to Air, the TV can

receive analog and digital (ATSC)

broadcasting signals.

2. Cable: Set the signal type to

cable. When set to Cable, the

TV can receive analog and QAM

broadcasting signals.

Scan

Please select scan or skip scan, press

[CH-]/[CH+] to select,

press [ENTER] to confirm:

English

Initial Setup Channel Scan

Skip Scan

Back Select Next Exit

Scan

Start channel scan now ?

First, please connect cable and/or antenna.

If you skip this step,the channel scan could be performed in Menu.

The Channel Scan may take a while to complete.

Initial Setup Channel Scan

Status:Scanning

Analog Channels:0

Digital Channels:0

Cancel

Exit

1. Scan: Automatically search for

channels.

2. Skip Scan: Skip the scan and enter

to the complete interface.

Complete

Initial Setup Complete

Congratulations!!

Completed Initial Setup.

Please press [ENTER] to exit the wizard.

Back

INPUT SOURCE

Source Select

Composite

Component

VGA

HDMI 1

HDMI 2

HDMI 3

USB

Press INPUT to display the input

source list, and press [CH-]/[CH+] to

select and ENTER to confirm.

Using the Remote Control to

Display and Navigate the On-

Screen Main Menus

1. Press [MENU] to display the on-

screen menu or to go back one

level in the menu. At the top level

menu, pressing the MENU button

will exit the menu.

2. Use the [VOL-] or [VOL+] buttons

to highlight the desired menu icon.

Press [ENTER] to select it.

3. Use the [CH+] or [CH-] buttons

to scroll up and down through the

features.

4. Follow the instructions on the

screen.

5. Press [EXIT] to immediately exit

the menu.

Press once to display the on-

screen menu, and press again

to return to normal view. If no

buttons are pressed, the menu

closes automatically after

about 60 seconds.

To exit the menus:Press [EXIT] (or

[MENU])

VIDEO

Parental

Setup

Audio

SelectEnter Exit

Video

Picture Mode Energy Saving

Brightness

Contrast

Saturation

Tint

Sharpness

1. Picture Mode: Use the [CH-] or

[CH+] buttons to highlight one of

the following options, then press

[ENTER] to enter the sub-menu

and press [VOL-] or [VOL+] to

adjust.

[Energy Saving] – Picture settings

that conserve the most energy.

[Mild] – Adjusts the brightness

and contrast level, and lowers the

sharpness for a soft picture viewing

mode.

[Standard] – Select for standard

picture settings. Recommended for

home entertainment.

[Bright Room] – Select for

enhanced picture brightness.

[User] – Allows you to store your

preferred settings.

Note: Changing the settings

below will automatically

change the Picture Mode to

User.

2. Brightness: Adjust to brighten or

darken the picture. Press

[VOL-]

darken the picture. Press [VOL+]

to brighten the picture.

3. Contrast: Adjust the white level

of the picture. Press [VOL-] to

decrease the contrast.Press [VOL+]

to increase the contrast.

4. Saturation: Adjust the color

saturation of the picture. Press

[VOL-] to increase the color

saturation. Press [VOL+] to

increase the color saturation.

5. Tint: Adjust the tint of the picture.

Press [VOL-] to increase the red

tones.Press [VOL+] to increase the

green tones.

6. Sharpness: Adjust to sharpen or

soften the picture. Press [VOL-] to

soften the picture.Press [VOL+] to

sharpen the picture.

7. Color Temperature: Use the

[CH-] or [CH+] buttons to

highlight one of the following

options, then press [ENTER] to

enter the sub-menu and press

[VOL-] or [VOL+] to adjust.

[Cool] – Select to give the white

color a bluish tint.

[Standard] – Select to give the

white color a neutral tint.

[Warm] – Select to give the white

color a reddish tint.

La page charge ...

Haier Car Satellite TV System LE46D2380 Manuel utilisateur

Marque: Haier

Modèle: Car Satellite TV System LE46D2380

Catégorie: Téléviseurs

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Haier Car Satellite TV System LE46D2380 User manual
español: Haier Car Satellite TV System LE46D2380 Manual de usuario

Haier Car Satellite TV System LE46D2380 Manuel utilisateur

Ce manuel convient également à

Haier Car Satellite TV System LE46D2380 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents