JVC 0210DTSMDTJEIN Manuel utilisateur

Catégorie
Récepteurs multimédia de voiture
Taper
Manuel utilisateur

Ce manuel convient également à

ESPAÑOL
FRANÇAIS
ENGLISH
Instructions CD RECEIVER KW-XR810
GET0661-001A
[J]
EN, SP, FR
0210DTSMDTJEIN© 2010 Victor Company of Japan, Limited
For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla,
consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.
CD RECEIVER / RECEPTOR CON CD /
RÉCEPTEUR CD
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information
for future reference.
Model No.
Serial No.
KW-XR810
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
We can help you!
CoverRear_KW-XR810[J]1.indd 1CoverRear_KW-XR810[J]1.indd 1 1/14/10 12:53:12 PM1/14/10 12:53:12 PM
2 ENGLISH
INFORMATION (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not approved by JVC could void the user’s authority to operate the
equipment.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare
into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not
view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
[European Union only]
Warning:
If you need to operate the unit while driving,
be sure to look around carefully or you may be
involved in a traffic accident.
For safety...
Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating
the unit.
EN02-11_KW-XR810[J]1.indd 2EN02-11_KW-XR810[J]1.indd 2 1/14/10 12:52:22 PM1/14/10 12:52:22 PM
3ENGLISH
How to read this manual
The following icons/symbols are used to
indicate:
Press and hold the button(s)
until the desired operation
begins.
Turn the control dial.
Turn the control
dial to make a
selection, then
press to confirm.
(
XX)
Reference page number
<XXXX> Menu setting item
Continued on the next page
How to reset your unit
Your preset adjustments
will also be erased (except
the registered Bluetooth
device). (
14, 15 )
How to forcibly eject a disc
You can forcibly eject the loaded disc even
if the disc is locked. To lock/unlock the disc,
10.
Be careful not to drop the disc when it ejects.
If this does not work, reset your unit.
CONTENTS
3 How to read this manual
3 How to reset your unit
3 How to forcibly eject a disc
4
Canceling the display
demonstration
4 Setting the clock
5 Preparing the remote controller
(RM-RK50)
6 Basic operations
8 Listening to the radio
10 Listening to a disc
12 Listening to the USB device
13 Using the Bluetooth ® device
16 Using a Bluetooth mobile phone
19 Using a Bluetooth audio player
20 Changing the Bluetooth settings
22 Listening to the HD Radio
Broadcast
23 Listening to the satellite radio
26 Listening to the iPod/iPhone
29 Listening to the other external
components
30 Selecting a preset sound mode
31 Menu operations
36 Selecting the variable buttons and
display color illumination
37 Creating your own day and night
colors—User
38 Setting the time for dimmer
38 More about this unit
43 Maintenance
44 Troubleshooting
50 Specifications
[Hold]
[Hold]
Thank you for purchasing a JVC product.
Please read all instructions carefully before
operation, to ensure your complete
understanding and to obtain the best possible
performance from the unit.
EN02-11_KW-XR810[J]3.indd 3EN02-11_KW-XR810[J]3.indd 3 1/27/10 4:23:40 PM1/27/10 4:23:40 PM
4 ENGLISH
1 Turn on the power.
2
SET UP
DEMO
Clock
PRO EQ
3 Select <DEMO>.
DEMO
Off
On
Setting the clock
4 Select <Off>.
DEMO
On
Off
5 Finish the procedure.
Canceling the display demonstration
6 Adjust the minute.
Clock
Set Clock
Clock Adjust
24H/12H
Set Clock
1 : 00 AM
7 Select <24H/12H>.
Clock
Set Clock
Clock Adjust
24H/12H
8 Select <24Hours> or <12Hours>.
24H/12H
24Hours
12Hours
9 Finish the procedure.
1 Turn on the power.
2
SET UP
DEMO
Clock
PRO EQ
3 Select <Clock>.
SET UP
DEMO
Clock
PRO EQ
4 Select <Set Clock>.
Clock
24H/12H
Set Clock
Clock Adjust
5 Adjust the hour.
Set Clock
1 : 00 AM
(Initial setting)
(Initial setting)
[Hold]
[Hold]
EN02-11_KW-XR810[J]1.indd 4EN02-11_KW-XR810[J]1.indd 4 1/14/10 12:52:23 PM1/14/10 12:52:23 PM
5ENGLISH
Warning (to prevent accidents and
damage):
Do not install any battery other than CR2025
or its equivalent.
Do not leave the remote controller in a place
(such as dashboards) exposed to direct
sunlight for a long time.
Store the battery in a place where children
cannot reach.
Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
Do not leave the battery with other metallic
materials.
Do not poke the battery with tweezers or
similar tools.
Wrap the battery with tape and insulate when
throwing away or saving it.
This unit is equipped with the steering wheel
remote control function.
Before operating, connect an exclusive remote
adapter (not supplied) which matches your car
to the steering wheel remote input terminal on
the rear of the unit.
For details, refer also to the instructions
supplied with the remote adapter.
Preparing the remote controller (RM-RK50)
When you use the remote controller for the first
time, pull out the insulation sheet.
For USA-California Only:
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material—
special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate
If the effectiveness of the remote controller
decreases, replace the battery.
Replacing the lithium coin battery
CR2025
Caution:
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
Insulation sheet
Caution on volume setting:
Digital devices (CD/USB) produce very little
noise compared with other sources. Lower the
volume before playing these digital sources
to avoid damaging the speakers by sudden
increase of the output level.
Caution:
If the temperature inside the car is below 0°C
(32°F), the movement of animation and text
scroll will be halted on the display to prevent
the display from being blurred. appears on
the display.
When the temperature increases, and the
operating temperature is resumed, these
functions will start working again.
EN02-11_KW-XR810[J]1.indd 5EN02-11_KW-XR810[J]1.indd 5 1/14/10 12:52:24 PM1/14/10 12:52:24 PM
6 ENGLISH
Changing the display information and pattern
Ex.: When tuner is selected as the source
Basic operations
Control dial
Ejects the disc Loading slot
USB (Universal Serial
Bus) input terminal
Display window
Remote sensor
DO NOT expose to bright sunlight.
Source operation display
If a station has been assigned a title, station
title appears after about 5 seconds.
To assign a title to a station,
9.
Audio level meter display
(<Level Meter>, 33)
Auxiliary input jack
Selects preset station/channel.
EN02-11_KW-XR810[J]f.indd 6EN02-11_KW-XR810[J]f.indd 6 2/9/10 12:16:23 PM2/9/10 12:16:23 PM
7ENGLISH
When you press or hold the following button(s)...
Main unit
Remote
controller
General operation
Turns on.
When the power is on, pressing /I/ATT on the remote controller
also mutes the sound or pauses. Press /I/ATT again to cancel
muting or resume playback.
Turns off if pressed and held.
Selects the available sources (if the power is turned on).
If the source is ready, playback also starts.
Adjusts the volume level.
Selects items.
Mutes the sound while listening to a source. If the source is “CD,”
“USB FRONT/USB REAR” or “iPod FRONT/iPod REAR,” playback
pauses. Press the control dial again to cancel muting or resume
playback.
• Confirms selection.
Enters repeat mode menu (
11, 19, 28 ) directly if pressed
RPT.
Enters random mode menu directly ( 11, 19, 28 ) if pressed
RND.
Selects the sound mode.
Enters tone level adjustment directly ( 30 ) if pressed and held
EQ BASS-TRE on the main unit.
Enters “Call Menu” screen * or answers incoming call when the unit
rings.
Ends a call if pressed and held after a phone call conversation.
Switches the connected mobile phone to the last connected
mobile phone if pressed and held. (
18 )
* If there is no call list, the unit beeps.
Returns to the previous menu.
Switches the controlling terminal for iPod playback if pressed and
held. ( 26, 35 )
Power off : Checks the current clock time.
Power on : Changes the display information and pattern.
EN02-11_KW-XR810[J]2.indd 7EN02-11_KW-XR810[J]2.indd 7 1/20/10 3:03:12 PM1/20/10 3:03:12 PM
8 ENGLISH
Manual search
“M” appears, then
press the button
repeatedly.
When an FM stereo broadcast is
hard to receive
1
2
]
<Tuner>
]
<Stereo/Mono>
]
<Mono>
Reception improves, but stereo effect
will be lost.
To restore the stereo effect, repeat the same
procedure to select <Stereo>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
]
<Tuner>
]
<SSM>
]
<SSM 01 – 06 / SSM 07 – 12 /
SSM 13 – 18>
“SSM” appears and local stations with
the strongest signals are searched and
stored automatically.
To preset another 6 stations, repeat the above
procedure by selecting one of the other 6 SSM
setting ranges.
If an HD Radio tuner box is connected (
22 ),
you can also search and store 6 stations for AM
by following the above operations.
[Hold]
[Hold]
[Hold]
Listening to the radio
~
]
“FM” or “AM”
Ÿ
lights up when receiving an FM stereo broadcast
with sufficient signal strength.
EN02-11_KW-XR810[J]1.indd 8EN02-11_KW-XR810[J]1.indd 8 1/14/10 12:52:25 PM1/14/10 12:52:25 PM
9ENGLISH
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number “4.”
1
]
“92.50MHz”
2
]
Shows the “Preset Mode” screen.
3
]
Selects preset number “4.”
“04” flashes.
Pressing and holding the number buttons
(1 – 6) can also store the current station to the
selected number buttons (1 – 6).
Selecting a preset station
or
1
2
Pressing the number buttons (1 – 6) can also
select the preset stations (1 – 6).
Using the remote controller
5
U
/
D
: Changes the preset
stations
2
R
/
F
3
: Searches for stations
[Hold]
Title assignment
You can assign titles up to 30 station
frequencies (FM and AM) using 8 characters
(maximum) for each title.
If you try to assign titles to more than 30
station frequencies, “Name Full” appears.
Delete unwanted titles before assignment.
When HD Radio tuner box is connected
(
22 ), this feature will be disabled.
1
]
“FM” or “AM”
2
]
Shows the title entry screen.
3
]
Selects a character.
4
]
Moves to the next (or previous)
character position.
5
Repeat steps 3 and 4 until you have
finished entering the title.
6
To erase the entire title, press and hold
DISP
after step 2, then press the control dial.
Available characters
AZ (upper case), az (lower case), 09
(numbers), and the following symbols:
!”#
$
%
&
’()
*+,./:;<
=>?@
' space
[Hold]
EN02-11_KW-XR810[J]1.indd 9EN02-11_KW-XR810[J]1.indd 9 1/14/10 12:52:25 PM1/14/10 12:52:25 PM
10 ENGLISH
Stopping playback and ejecting
the disc
“No Disc” appears.
Remove the disc, then press
SOURCE
to listen to another
playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
Selects folder of the MP3/WMA
Selects track
Fast-forwards or
reverses the track
Listening to a disc
~
]
Turn on the power.
Ÿ
All tracks will be played repeatedly until you change
the source or eject the disc.
[Hold]
[Hold]
Selecting a folder/track on the
list
While listening to a disc....
1
]
Enter the list menu.
2
]
Select your desired item.
MP3/WMA: Select your desired folder,
then the desired track by repeating
this step.
If the MP3/WMA disc contains many tracks,
you can fast search (±10, ±100, ±1000)
through the disc by turning the control dial
quickly.
To return to the previous menu, press
BACK
.
EN02-11_KW-XR810[J]1.indd 10EN02-11_KW-XR810[J]1.indd 10 1/14/10 12:52:25 PM1/14/10 12:52:25 PM
11ENGLISH
For MP3/WMA disc, you can also use the search
menu (A to Z, 0 to 9, and OTHERS) to scroll
through the list menu.
“OTHERS” appears if the 1st character is not A
to Z or 0 to 9, such as #, —, !, and etc.
While in list menu....
1
Press
5
/
to show the search menu.
The first character of the current folder/file
name appears.
2
Press
5
/
to select your desired character.
Then press the control dial to confirm.
The track list with the selected character
appears.
3
Turn the control dial to select your desired
track. Then press the control dial to confirm.
Only the existing characters will be shown on
the search menu.
Press and hold
5
/
to continuously change
the character of the search menu.
If your disc contains many tracks, searching
take some time.
Using the remote controller
5
U
/
D
: Selects folder of the
MP3/WMA
2
R
/
F
3
: Selects track
2
R
/
F
3
[Hold]
: Fast-forwards or
reverses the track
Selecting the playback modes
You can use only one of the following playback
modes at a time.
1
]
“Repeat” or “Random”
Pressing and holding the control
dial will enter the playback mode
menu. Turn the control dial to make
a selection (Repeat or Random), then
press to confirm.
2
Repeat
Track : Repeats current track
Folder : Repeats current folder
Random
Folder : Randomly plays all tracks of
current folder, then tracks of
next folders
All : Randomly plays all tracks
To cancel repeat play or random play, select
“Off.”
EN02-11_KW-XR810[J]1.indd 11EN02-11_KW-XR810[J]1.indd 11 1/14/10 12:52:25 PM1/14/10 12:52:25 PM
12 ENGLISH
Listening to the USB device
This unit is equipped with two USB input terminals (on the control panel and USB cable from the
rear of the unit). You can use these two terminals at the same time.
You can also connect a USB Bluetooth Adapter, KS-UBT1 (supplied), ( 14) and/or an Apple
iPod/iPhone ( 26) to the USB input terminal(s).
This unit can play MP3/WMA/WAV tracks stored in a USB mass storage class device (such
as a USB memory, Digital Audio Player, etc.).
~
]
Turn on the power.
Ÿ
– – – – – – – – and / or – – – – – – – –
All tracks will be played repeatedly until you change the source or detach the USB
device.
USB cable from the
rear of the unit
USB input terminal USB memory
If you have turned off the power (without
detaching the USB device)...
Pressing
SOURCE
turns on the power and
playback starts from where it has been stopped
previously.
If a different USB device is currently attached,
playback starts from the beginning.
Stopping playback and detaching
the USB device
Straightly pull it out from the unit.
“No USB” appears. Press
SOURCE
to listen to
another playback source.
EN12-21_KW-XR810[J]2.indd 12EN12-21_KW-XR810[J]2.indd 12 1/20/10 3:04:35 PM1/20/10 3:04:35 PM
13ENGLISH
Using the Bluetooth ® device
Bluetooth is a short-range wireless radio communication technology for the mobile device such
as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected
without cables and communicate with each other.
Refer to page 4 of the Installation/Connection Manual (separate volume) to check the countries
where you may use the Bluetooth® function.
Bluetooth profile
This unit supports the following Bluetooth profiles;
HFP (Hands-Free Profile) 1.5
OPP (Object Push Profile) 1.1
PBAP (Phonebook Access Profile) 1.0
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio/Video Remote Control Profile) 1.3
You can operate the USB device in the same
way you operate the files on a disc.
(
10, 11)
You can listen to WAV files by following the
MP3/WMA file operations. ( 10, 11)
Cautions:
Avoid using the USB device if it might hinder
your safety driving.
While “Reading” is shown on the display:
Do not pull out and attach the USB device
repeatedly.
Do not pull out or attach another USB
device.
Do not start the car engine if a USB device is
connected.
This unit may not be able to play the files
depending on the type of USB device.
Operation and power supply may not work as
intended for some USB devices.
You cannot connect a computer to the USB
input terminal of the unit.
Make sure all important data has been backed
up to avoid losing the data.
Electrostatic shock at connecting a USB
device may cause abnormal playback of the
device. In this case, disconnect the USB device
then reset this unit and the USB device.
Do not leave a USB device in the car, expose
to direct sunlight, or high temperature to
avoid deformation or cause damages to the
device.
Some USB devices may not work immediately
after you turn on the power.
The detect time and response time may
be very long for some USB devices (such as
Digital Audio Player, etc.).
For more details about USB operations,
40, 41.
EN12-21_KW-XR810[J]1.indd 13EN12-21_KW-XR810[J]1.indd 13 1/14/10 12:51:57 PM1/14/10 12:51:57 PM
14 ENGLISH
Refer also to the instructions supplied with the Bluetooth device.
Preparation:
Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the
unit.
Operate the device to turn on its Bluetooth function.
~
]
Turn on the power.
Ÿ
– – – – – – – – or – – – – – – – –
Only one USB Bluetooth Adapter can be detected at a time.
USB input terminal KS-UBT1
USB cable from the
rear of the unit
Pairing a device
When you connect a Bluetooth device to the unit for the first time, make pairing between the unit
and the device.
Once the connection is established, it is registered in the unit even if you reset the unit. Up to five
devices can be registered in total.
Only one device for Bluetooth phone and one for Bluetooth audio can be connected at a time.
EN12-21_KW-XR810[J]2.indd 14EN12-21_KW-XR810[J]2.indd 14 1/20/10 3:08:20 PM1/20/10 3:08:20 PM
15ENGLISH
1
2
] <Bluetooth> ] <New Pairing>
3
]
Enter a PIN (Personal Identification
Number) code in to the unit.
You can enter any number you like
(1-digit to 16-digit number).
[Initial: 0000]
Some devices have their own PIN
code. Enter the specified PIN code in
to the unit.
4
Repeat step 3 until you have finished
entering the PIN code.
5
]
Confirm the entry.
“Search Now Using Phone” appears.
6
Use the Bluetooth device to search.
On the device to be connected, enter
the same PIN code you have just
entered for this unit.
“Pairing OK“ appears for a while, then
“Connect Now Using Phone” appears.
Phone icon appears when Bluetooth
connection is established.
7
Use the Bluetooth device to connect *.
Refer to the following table for
connectivity results shown on the
display.
* Operations may be different according
to the connected device.
Display result
Hands-Free
Call
Audio
Streaming
Connect OK
[Device Name]
‡‡
Handsfree OK
[Device Name]
Audio Stream OK
[Device Name]
Connect Fail Try
Reconnect
——
The device remains registered even after you
disconnect the device. Use <Connect Phone>
or <Connect Audio> (or activate
<Auto Connect>,
20) to connect the same
device from next time on.
Deleting a registered device
1
2
] <Bluetooth> ] <Delete Pairing>
3
]
Select a device you want to delete.
“Delete OK?” appears on the display.
4
]
Delete the selection.
“OK” appears when the device is
deleted.
To return to the previous menu, press
BACK
.
[Hold]
[Hold]
EN12-21_KW-XR810[J]1.indd 15EN12-21_KW-XR810[J]1.indd 15 1/14/10 12:51:57 PM1/14/10 12:51:57 PM
16 ENGLISH
Connecting/disconnecting a
registered device
1
2
] <Bluetooth> ] <Connect Phone /
Connect Audio> or <Disconnect
Phone / Disconnect Audio>
For connecting a device, go to step 3.
For disconnecting a device,
“Disconnecting” appears, then
“Disconnected [Device Name]”
appears on the display when the
device is disconnected.
3
]
Select a device you want to connect.
“Connecting...” appears, then
“Connected [Device Name]” appears
on the display when the device is
connected.
Using a Bluetooth mobile
phone
Making a call
1
] Enter “Call Menu” screen.
2
] Select the method to make a call.
Dialed Calls *
1
: Shows the list of the
phone numbers you have dialed. Go
to the following step.
[Hold]
Received Calls *
1
: Shows the list of
the received calls. Go to the following
step.
Missed Calls *
1
: Shows the list of the
missed calls. Go to the following step.
Phonebook *
2
: Shows the name/
phone number of the phonebook
registered in the unit or from the
connected phone *
3
. Go to the
following step.
To copy the phonebook memory,
<Phonebook
Trans>, 21.
If the phonebook contains many
numbers, you can fast search (±10,
±100, ±1000 numbers) through the
phonebook by turning the control
dial quickly.
To search through the phonebook,
17.
Dial Number: Shows the “Dial
Number” screen. ( 17)
Voice Dial (only accessible when
the connected mobile phone has
the voice recognition system): Speak
the name (registered words) you
want to call when “Say Name Clearly”
appears *
4,
*
5
.
*
1
“No History Found” appears and the
unit beeps if there is no history stored.
*
2
“No Entries Found” or “Send
Phonebook Manually”
appears depending on the
<Phonebook Select> settings, 21.
*
3
Depends on the <Phonebook Select>
settings, 21.
*
4
Operations may be different according
to the connected device.
*
5
“Not Support” appears if the
connected phone does not support
this feature.
EN12-21_KW-XR810[J]1.indd 16EN12-21_KW-XR810[J]1.indd 16 1/14/10 12:51:58 PM1/14/10 12:51:58 PM
17ENGLISH
3
]
Select the name/phone number you
want to call.
When the sound is stopped or
interrupted during the use of a
Bluetooth device, turn off, then turn
on the unit.
If the sound is not yet restored,
connect the device again using
<Connect Phone>.
How to enter phone number
1
Turn the control dial to select a number.
2
Press
4
/
¢
to move the entry
position.
3
Repeat steps
1
and
2
until you finish
entering the phone number.
4
Press the control dial to confirm the entry.
How to delete name/phone number
Only when <In Unit> is selected for
<Phonebook Select>, 21.
1
Press to enter “Call Menu” screen.
2
Display the list of name/phone numbers
using one of the dialing method (see step 2
of “Making a call,” 16).
3
Turn the control dial to select the name/
phone number you want to delete.
4
Press and hold
BACK
to enter the “Delete
Entries” screen.
5
Turn the control dial to select “Delete” or
“Delete All.”
If “Delete” is selected, the selected name/
phone number in step
3
is deleted.
If “Delete All” is selected, the listed
numbers in step
2
selection are deleted.
6
Press the control dial to confirm.
Selecting a contact from the
phonebook
1
] Enter “Call Menu” screen.
2
]
<Phonebook>
3
]
Show the search menu (A to Z, 0 to
9, and OTHERS).
The first character of the first contact on
the phonebook appears.
“OTHERS” appears if the 1st character
is not A to Z or 0 to 9, such as #, —, !,
and etc.
4
]
Select your desired character.
The name list of the selected character
appears.
5
]
Select your desired contact.
To return to the previous menu, press
BACK
.
EN12-21_KW-XR810[J]1.indd 17EN12-21_KW-XR810[J]1.indd 17 1/14/10 12:51:58 PM1/14/10 12:51:58 PM
18 ENGLISH
Only the existing characters will be shown on
the search menu.
Press and hold
5
/
to continuously change
the character of the search menu.
If your phonebook contains many contacts,
searching take some time.
Receiving/ending a phone call
When a call comes in, the source is
automatically changed to “BT FRONT/BT REAR.”
“Receiving... [Phone number/name]” appears
on the display.
The display will flash in blue. (<Ring Color>,
32)
When <Auto Answer> is activated....
The unit answers the incoming calls
automatically, 20.
• Press or the control dial to answer
the incoming call when <Auto Answer> is
deactivated.
• Press
5
/
to adjust the microphone volume
(1 – 3) during a phone call conversation.
To preset the microphone volume, 20.
• Press
4
/
¢
to turn on/off the
Noise Reduction and Echo Cancelation mode.
To preset, 20.
To end a call or reject an incoming call, press
and hold or the control dial.
Switching conversation media (the unit/
mobile phone)
Press the control dial during a phone call
conversation, then continue your conversation
using the other media.
Operations may be different according to the
connected Bluetooth device.
Switching the connected mobile phone
You can switch the current connected mobile
phone to the last connected mobile phone.
Phone icon appears and “Connecting” flashes
on the display. When the last connected
phone is being reconnected again, “Connected
[Device Name]” appears on the display. Now
you can use the last connected mobile phone
with the unit.
Arriving of a text message
When a text message comes in, the unit rings
if your mobile phone is compatible with text
message and <Message Notice> is set to
<On>. ( 20)
“Received Message” appears on the
display and the display illuminate in blue.
(<Ring Color>, 32)
You cannot read, edit, or send a message
through the unit.
Using the remote controller
5
U
/
D
/
2
R
/
F
3
/
SOURCE
: Answers calls
5
U
/
D
/
2
R
/
F
3
/
SOURCE
[Hold]
: Rejects calls
: Switches the conversation media
(between the unit and mobile
phone) during a phone call
conversation
[Hold]
EN12-21_KW-XR810[J]2.indd 18EN12-21_KW-XR810[J]2.indd 18 1/20/10 3:08:46 PM1/20/10 3:08:46 PM
19ENGLISH
Selecting the playback modes
For Bluetooth devices that support AVRCP 1.3.
1
]
“Repeat” or “Random”
Pressing and holding the control
dial will enter the playback mode
menu. Turn the control dial to make
a selection (Repeat or Random), then
press to confirm.
2
Repeat
Track
All
Group
: Repeats current track
: Repeats all tracks
: Repeats all track of current
group
Random
All
Group
: Randomly plays all tracks
: Randomly plays all track of
current group
To cancel repeat play or random play, select
“Off.”
To return to the previous menu, press
BACK
.
Starts or resumes
playback
Mutes the sound
Selects group/folder
Forward skips or
reverse skips
Fast-forwards or
reverses the track
Using the remote controller
2
R
/
F
3
: Forward skips or
reverse skips
2
R
/
F
3
[Hold]
: Fast-forwards or
reverses the track
[Hold]
Using a Bluetooth audio player
Operations and display indications differ depending on their availability on the connected device.
] Select “BT FRONT” or “BT REAR.”
If playback does not start
automatically, operate the Bluetooth audio player to start playback.
EN12-21_KW-XR810[J]1.indd 19EN12-21_KW-XR810[J]1.indd 19 1/14/10 12:51:59 PM1/14/10 12:51:59 PM
20 ENGLISH
1
2
] <Bluetooth> ] <Setting>
3
]
Select a setting item, then repeat
the procedure to change the setting
accordingly.
To return to the previous menu, press
BACK
.
To exit from the menu, press
DISP
or
MENU
.
Setting item Selectable setting, [ Initial: Underlined ]
Auto Connect Last
Off
: The connection is established automatically with the last
connected Bluetooth device when you turn on the unit.
: The unit does not connect the Bluetooth device automatically.
Connect the device manually. ( 16)
Auto Answer
On
Off
: The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer the
calls manually. ( 18)
Message
Notice
On
Off
: The unit informs you of the arrival of a message by ringing and
displaying “Received Message.”
: The unit does not inform you of the arrival of a message.
MIC Setting
: Adjust the volume of the microphone connected to the unit.
[ Level 01/02/03 ]
NR/EC Mode
On
Off
: The unit adjusts the Noise Reduction and Echo Cancelation of
the microphone connected to the unit for clearer sound.
: Cancels.
Ringing Tone
In Unit
In Phone
: The unit rings to alert you when a call/Text Message comes in.
Call: Select your preferred ring tone when a call comes
in. [ Tone 1/2/3 ]
Message: Select your preferred ring tone when a Text
Message comes in. [ Tone 1/2/3 ]
: The unit rings (using the connected phones’ ring tone) to
alert you when a call/Text Message comes in. (The connected
mobile phone rings if it does not support this feature.)
Changing the Bluetooth settings
[Hold]
EN12-21_KW-XR810[J]1.indd 20EN12-21_KW-XR810[J]1.indd 20 1/14/10 12:51:59 PM1/14/10 12:51:59 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151

JVC 0210DTSMDTJEIN Manuel utilisateur

Catégorie
Récepteurs multimédia de voiture
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues