Samsung HW-S800B Manuel utilisateur

FULL MANUAL

HW-S800B / HW-S801B

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/register

ENG - 2

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE

COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Refer to the table below for an explanation of symbols which may be

on your Samsung product.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

This symbol indicates that high voltage is present inside.

It is dangerous to make any kind of contact with any

internal part of this product.

This symbol indicates that this product has included

important literature concerning operation and

maintenance.

Class II product : This symbol indicates that a safety

connection to electrical earth (ground) is not required.

If this symbol is not present on a product with a power

cord, the product MUST have a reliable connection to

protective earth (ground).

AC voltage : Rated voltage marked with this symbol is AC

voltage.

DC voltage : Rated voltage marked with this symbol is DC

voltage.

Caution. Consult Instructions for use : This symbol

instructs the user to consult the user manual for further

safety related information.

WARNING

• To reduce the risk of re or electric shock, do not expose this

appliance to rain or moisture.

• To prevent injury, this apparatus must be securely attached to the

oor/wall in accordance with the installation instructions.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put

objects lled with liquids, such as vases, on the apparatus.

• To turn this apparatus off completely, you must pull the power

plug out of the wall socket. Consequently, the power plug must be

easily and readily accessible at all times.

CAUTION (for Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that

comply with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference.

(2) This device must accept any interference,

including interference that may cause undesired operation of the

device.

This device and its antenna(s) must not be co-located or operation in

conjunction with any other antenna or transmitter.

This device may automatically discontinue transmission if there is

no information to transmit, or an operational failure. Note that this

is not intended to prohibit the transmission of control or signaling

information or the use of repetitive codes where required by the

technology.

This Class B digital apparatus complies with Canadian ICES-003.

Radiation Exposure Statement

This equipment complies with IC RSS-102 radiation exposure limits

set forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20 cm between the

radiator & your body.

ENG - 3

Important Safety Instructions

Read these operating instructions carefully before using the unit.

Follow all the safety instructions listed below. Keep these operating

instructions handy for future reference.

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that

produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug.

A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your

safety. If the provided plug does not t into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specied by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

PRECAUTIONS

1. Ensure that the AC power supply in your house complies with the

power requirements listed on the identication sticker located

on the bottom of your product. Install your product horizontally,

on a suitable base (furniture), with enough space around it for

ventilation (3~4 inches). Make sure the ventilation slots are not

covered. Do not place the unit on ampliers or other equipment

which may become hot. This unit is designed for continuous use.

To fully turn off the unit, disconnect the AC plug from the wall

outlet. Unplug the unit if you intend to leave it unused for a long

period of time.

2. During thunderstorms, disconnect the AC plug from the wall

outlet. Voltage peaks due to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or other heat sources.

This could lead to overheating and cause the unit to malfunction.

4. Protect the product from moisture (i.e. vases), and excess heat

(e.g. a replace) or equipment creating strong magnetic or electric

elds. Unplug the power cable from the AC wall socket if the unit

malfunctions. Your product is not intended for industrial use. It is

for personal use only. Condensation may occur if your product has

been stored in cold temperatures. If transporting the unit during

the winter, wait approximately 2 hours until the unit has reached

room temperature before using.

5. Fire or explosion may occur, resulting in damage to the remote

control or personal injury.

• Do not apply shock to the remote control.

• Be careful not to let foreign substances such as metal, liquid, or

dust come in contact with the charging terminal of the remote

control.

• When the remote control is damaged or you smell smoke or

burning fumes, immediately stop operation and then repair it at

the Samsung service center.

• Do not arbitrarily disassemble the remote control.

• Be careful not to let infants or pets suck or bite the remote

control. Fire or explosion may occur, resulting in damage to the

remote control or personal injury.

ENG - 4

CONTENTS

01 Checking the Components 6

02 Product Overview 7

Top Panel of the Soundbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Rear Panel of the Soundbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

03 Using the Soundbar Remote Control 9

About the Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

How to Use the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Active Voice Amplier (AVA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Using the Hidden Buttons (Buttons with more than one function). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Output specications for the different sound effect modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Adjusting the Soundbar volume with a TV remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

04 Connecting the Soundbar 14

Connecting the power and units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

‒ Manually connecting the Subwoofer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

‒ LED Indicator Lights on the Rear of Subwoofer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting an SWA-9500S (Sold Separately) to your Soundbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

05 Connecting to a TV 17

Connecting the TV that supports HDMI ARC (Audio Return Channel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Connecting via Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting via Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connecting to a TV that supports Dolby Atmos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using the Q-Symphony Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Using the Spacet sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

06 Connecting a Mobile Device 23

Method 1. Connecting via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Method 2. Connecting via Wi-Fi (Wireless Network). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Using the Tap Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

07 Connecting via Apple Airplay 2 27

08 Installing the Wall Mount 28

Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Wallmount Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

09 Installing the Soundbar in front of TV 29

ENG - 5

10 Software Update 30

Auto Update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

USB Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

11 Troubleshooting 31

12 License 32

13 Open Source License Notice 33

14 Important Notes About Service 33

15 Specications and Guide 34

Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

ENG - 6

01 CHECKING THE COMPONENTS

Soundbar Main Unit Soundbar Remote Control Subwoofer

x 2

AC/DC Adapter (Soundbar) Power Cord (Subwoofer, Soundbar) HDMI to Micro HDMI Cable

AH81-15127A-01

A TYPE : 740mm

B TYPE : 700mm

x 2 x 2

Wall Mount Guide Bracket-Wall Mount Holder-Screw

x 4

(M5 X L55)

x 4

Screw Screw Anchor

• For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the

Soundbar Main Unit)

• To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.

• For more information about the wallmount or rubber-foot, see pages 28~29.

• Design, specications, and App screen are subject to change without prior notice.

• The appearance of the accessories may differ slightly from the illustrations above.

ENG - 7

02 PRODUCT OVERVIEW

Top Panel of the Soundbar

2 4

3

1

1LED indicator

The LED Indicator ashes, glows, or changes color depending on the Soundbar’s current mode or status. The color of the LED indicator

and the number of lights indicate the active mode as described below.

W

White LED

W

White LED

M

Multicolor LED

W

White LED

W

White LED

• The Multicolor LED changes to White, Cyan, Green, Red, and Blue depending on the mode or status.

2 (Multi Function) Button

• In standby mode, press the (Multi Function) button to turn on the Soundbar.

• Press the (Multi Function) button to change the mode. Each time you change the mode, the LED lights in white and then turns off.

LED indicator White On → Off White On → Off White On → Off

“TV ARC” “Wi-Fi” “Bluetooth”

3 (Volume) Button

Adjusts the volume.

4 (Mic On/Off) Button

Press the button to turn the microphone on or off.

When the microphone is off, the LED indicator will light red.

LED indicator Red On

“Mic Off” “Mic On”

• When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.

• When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

• If you hear sounds from both the TV and Soundbar, go to the Settings menu for the TV audio and change the TV speaker to External Speaker.

• You can turn on and off audio feedback by using SmartThings app. To learn about using the SmartThings app, refer to “Method 2. Connecting

via Wi-Fi (Wireless Network)”.

ENG - 8

Rear Panel of the Soundbar

DC 19V

SERVICE

HDMI

(ARC) DC 19V

SERVICE

HDMI

(ARC)

DC 19V

SERVICE

HDMI

(ARC) DC 19V

SERVICE

HDMI

(ARC) DC 19V

SERVICE

HDMI

(ARC) DC 19V

SERVICE

HDMI

(ARC)

3

1

2

1SERVICE

Connect a USB storage device to upgrade the product’s software.

2HDMI (ARC)

Connect to the HDMI (ARC) port on a TV. (See page 17)

3DC 19V

Connect the AC/DC power adapter. (Power Supply In) (See page 14)

• When disconnecting the power cable of the AC/DC power adaptor from a wall outlet, pull the plug.

Do not pull the cable.

• Do not connect this unit or other components to an AC outlet until all connections between components are complete.

ENG - 9

03 USING THE SOUNDBAR REMOTE CONTROL

About the Remote control

• Use the Remote less than 6 m from the product. The usable distance may vary with the wireless

environmental conditions.

• When the remote control does not work due to low battery, charge it by using the USB-C type port.

• The illustration differs with the respective Remote Control model.

USB port (C-type) for

charging

How to Use the Remote Control

1

3

5

8

11

13

7

10

12

2

4

9

6

14

1

Power

Turns the Soundbar on and off.

LED

indicator

Cyan Blinks X1

On

Red Blinks X3

Off

• Auto Power Down Function

The unit turns off automatically in the following situations:

• In “TV ARC” / “Wi-Fi” / “Bluetooth” mode if there is no audio signal

for 18 minutes.

2

Source

Press to select a source connected to the Soundbar.

• Audio Feedback On/Off

You can turn on or off the Audio Feedback. Press and hold the

(Source) button on the remote control for 5 seconds while the

Soundbar is off (Standby mode).

LED

indicator

Cyan Blinks X1

On

Red Blinks X1

Off

3

Up/Down/Left/

Right

Press the indicated areas to select Up/Down/Left/Right.

Press Up/Down/Left/Right on the button to select or set functions.

• Music Skip

Press the Right button to select the next music le. Press the Left

button to select the previous music le.

• ID SET

Press and hold the Up button for 5 seconds to complete ID SET (when

connecting to a wireless subwoofer or wireless rear speakers).

4

Play / Pause

You can also play or pause music by pressing the button.

5

Mute

Press the (Mute) button to mute the sound.

Press it again to unmute the sound.

LED

indicator

Blinks X Repeatly

ENG - 10

6

Info

Press the button to display information about the current function. (See page 7)

When connected to Dolby Atmos®, the LED indicator blinks cyan 3 times.

7

SOUND MODE

By pressing the button, you can select the desired audio mode. Each time the mode changes, the Multicolor LED

blinks in white.

LED indicator White Blinks X1

“Surround” → “Game” → “Standard” → “Adaptive Sound” →

“DTS Virtual:X”

• Surround

Provides a wider sound eld than standard.

• Game

Provides stereoscopic sound to immerse you in the action while gaming.

• Standard

Outputs the original sound.

• Adaptive Sound

Analyzes the content in real time and automatically provides the optimal sound eld based on the

characteristics of the content.

• DTS Virtual:X

Immersive 3D sound from any content.

8

VOLUME

Push the button up or down to adjust the volume.

LED indicator

White moves to right X1

Volume Up

White moves to left X1

Volume Down

9

WOOFER (BASS)

LEVEL

Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the woofer

(bass) volume level to 0 (Default), press the button.

10

Bluetooth PAIR

Switch the Soundbar to Bluetooth pairing mode.

When you press the button, the LED display changes as shown below.

• Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.

LED indicator

Red → Green →

Blue Blinks

Pairing

Cyan Blinks X3

Connection is complete

“Ready to connect via Bluetooth.”

11

CH LEVEL

By pressing the button, you can adjust the volume of the each speaker.

• To control the volume of the each speaker select “Center Level” or “Front Top Level” in Sound Settings, and

then adjust the volume between -6~+6 by using the Up/Down buttons.

• If the Rear Speakers (sold separately) are connected, the setting “Rear Level” and “Rear Top Level” is

supported. To adjust the volume of the “Rear Level” and “Rear Top Level” between -6 to +6 by using the Up/

Down buttons.

LED indicator White Blinks X1

“Center Level” → “Front Top Level”

ENG - 11

12

TONE CONTROL

By pressing the button, you can adjust the volume of the treble or bass sound. The dered item can be adjusted

using the Up/Down buttons. This function is enabled in Sound mode excluding in Standard mode.

• To control the volume of the treble or bass sound, select “Treble” or “Bass” in Sound Settings, and then adjust

the volume between -6~+6 by using the Up/Down buttons.

• Once the bass level is changed, the woofer level will be also adjusted accordingly.

LED indicator White Blinks X1

“Treble” → “Bass”

13

Sound Control

By pressing the button, you can set the audio function. The desired item can be adjusted using the Up/Down

buttons. Each time the mode changes, the Multicolor LED blinks in white.

LED indicator White Blinks X1

“SpaceFit Sound” → “Active Voice Amplier” → “Voice

enhancement” → “Night Mode” → “Sync” → “Virtual”

• Voice enhancement makes it easier to hear spoken dialog in movies and TV.

• Night Mode is optimized for night time viewing with the settings adjusted to bring the volume down but keep

the dialog clear.

• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band.

150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each

can be adjusted to a setting between -6 to +6 using the Up/Down buttons.

(Make sure the Sound mode is set to “STANDARD”.)

• If the video on the TV and audio from the Soundbar are not synchronized, select “Sync” in Sound Control, and

then set the audio delay between 0~300 milliseconds by using the Up/Down buttons.

• “Sync” is only supported for some functions.

• The Virtual function can be turned On/Off by using the Up/Down buttons.

14 USB port (C-type)

for charging

The LED lights while charging. When fully charged, the LED turns off.

• The USB Cable is not provided.

• When the remote control does not work due to low battery, charge it by using the USB-C type port.

Active Voice Amplier (AVA)

• Analyzes external noise in real time while soundbar is playing, so that voice audio can always be heard clearly.

• No data is saved during the analysis.

Using the Hidden Buttons (Buttons with more than one function)

Hidden Button

Reference page

Remote Control Button Function

WOOFER (Up) TV remote control On/Off (Standby) page 13

Up ID SET page 9

(Sound Control) 7 Band EQ page 11

(Source) Audio Feedback On/Off (Standby) page 9

ENG - 12

Output specications for the different sound effect modes

Effect Input

Output

With Subwoofer Only With Subwoofer & Wireless Rear

Speaker Kit

Surround

2.0 ch 3.1.2 ch 5.1.4 ch

5.1 ch 3.1.2 ch 5.1.4 ch