Emac NCA8912 Guide d'installation

Taper
Guide d'installation

Ce manuel convient également à

1
Novocanto
®
Aluminium
h: 6, 8, 10, 12, 14 mm.
Length: 250 cm
Material: Aluminium
NOVOCANTO
®
Aluminium
Aluminium profile, designed to protect and
decorate the tile, giving strength and lightness
of aluminium.
Of easy positioning, it is presented in its natural
colour, anodized or lacquered in different
smooth and decorated colours.
Easy placement, is presented in its natural
colour, lacquered or anodized in various
colors and sleek decor.
PROPERTIES OF ALUMINIUM
Aluminium is, after iron, the metal more
used in the world, and, very regularly, used
in modern construction too, as it has many
technical advantages.
Aluminium protects itself forming quickly a
thin surface layer of aluminium oxide
(Al
2
O
3
) when it to come into contact with
the air. This layer is waterproof and stops
the process of oxidation, which provides
corrosion resistance and durability. This
layer can dissolve with citric acid forming
aluminium citrate.
Aluminium used corresponds to the alloy
6063, according to the European
Aluminium Association (Numerical
designation L-3441/38-337, according to
Spanish Standard UNE 38-301-89).
material. Its specific mass is 2,70 g/cm
3
.
Fire resistance classification as A1
according to the current standard UNE
EN 143501-1:2007. This classification
corresponds to the class as M0 according
to NBE-CPI-96 (in accordance with the
previous standard UNE 23727:1990),
corresponding to a non-combustible
material against the thermal action.
Anodizing and lacquering processes that
are performed on Novocanto
®
have
Qualanoad and Qualicoat quality labels
respectively. The protection and colour
provided by the both are stable, smooth
and durable, providing an aesthetic
appearance and the highest quality
finished.
2
FINISHED
presented in natural aluminium, lacquered and anodized by processes guaranteed by Qualanod
and Qualicoat labels of quality.
ANODIZED ALUMINIUM
The anodized aluminium is
one of the metals with higher
attributes, benefits and
applications. Thanks to its
durability and resistance to
corrosion can be placed
outdoors without experiencing deterioration as
time goes by.
The anodized is the most effective means to
prevent corrosion of aluminium. With the anode
protection, the resistance to corrosion is
permanent, although any mechanical damage
on the surface that breaks the anodic film can
create an area susceptible of attack.
The superficial treatment of anodising brings a
protection to abrasion and wear, even
increases the surface hardness faced to blows
too. As well:
Maintains of the appearance "brand new"
of the product.
It creates a surface which rejects impurities
to fill up the hygiene conditions.
Creates a decorative surface with a shine
and durable colour and
touch".
Electrical insulation action.
Anodized Emac
®
Profiles have an uniform
thickness of 15 microns, which makes it
resistant to a multitude of applications, from
insides, not aggressive outdoors, rural or urban,
to marine or industrial and urban atmospheres
with great pollution. They have been certified,
with quality label Qualanod, which regulates the
process, periodic testing and results. The
Qualanod stamp guarantees the following
qualities:
Appearance and colour always similar
(according EN 12373-1).
Thickness measurement.
High control of seal and impregnation.
High resistance to abrasion.
Strength to the light.
Testing in acid acetic chamber according to
ISO 9227.
Nitric acid immersion testing.
LACQUERED Aluminium
The lacquer is a
protection system of
aluminium which consists
in the application of an organic coating or paint
on the surface of the aluminium.
Lacquered aluminium of Emac
®
profiles has
been achieved through an exclusive and unique
technology of high-quality decorative lacquer
and certified with quality label QUALICOAT that
establishes the minimum requirements that the
production facilities, lacquer-ware materials and
final products must comply.
Lacquered aluminium profiles undergo
periodical testing, such as:
Appearance and gloss.
Coating thickness
Lacquered adhesion
Indentation
Impact test
Resistance to humid atmospheres with
sulphur dioxide.
Acetic acid salt spray resistance.
Polymerization test
Lacquered aluminium profiles of Emac
®
offer a
uniform coat of paint of approximately 100
microns, responding to the requirements of
construction and current standards.
3
COMPLEMENTARY PIECES
Novocanto
®
Aluminium
profile has available
complementary pieces to
allow you achieve a
perfect finished and a
good final touch: the
angle external.
External
angle 1
External
angle 2
These pieces are made of Zamak, an alloy,
non-ferrous, zinc with aluminium, magnesium
and copper (according to UNE-EN 1774), that
allows to obtain injected pieces for the perfect
finish of the corners.
It is a tenacious material, with high hardness,
high mechanical resistance and an excellent
plastic deformability.
These complementary pieces are supplied with a
colored protector adapted to the material and
finished that it complements.
We do not recommend its purchase in natural
finished, without protection, because Zamac with
heat and humidity gets dark and loses its
homogeneous appearance.
If you decide obtain
this piece in natural finished you should apply
plastic paint or other similar product to protect it
.
PLACEMENT
1. Place the profile corre
ctly aligned against
the corner
making sure that the fixing
material passes through the holes of the
fixing wing.
2. Then, place the coating pieces
pressing
them on the fixing wing to guarantee a
good fixation.
3. Finally, clean carefully the spare material.
Placement Example of a Novocanto
®
model
1.
2.
3.
4.
INSTALLATION OF COMPLEMENTARY PIECES
For the correct installation of the angle external 1, you have to position the fixing wing of the lower
Novocanto
®
to the left, just as the picture shows.
STEP by STEP
1 2
3
4
  • Page 1 1
  • Page 2 2
  • Page 3 3

Emac NCA8912 Guide d'installation

Taper
Guide d'installation
Ce manuel convient également à

dans d''autres langues