Emac NBIS0112 Guide d'installation

Taper
Guide d'installation

Ce manuel convient également à

FICHA TÉCNICA
TECHNICAL FILE
R03.002_13/02/2016
Prole made of aluminum to be installed as a corner protector to pro-
tect and decorate the edges of ceramic walls. Also useful to top off
skirting boards or medium height tiled walls. The bevel visible side inte-
grates with the tiling providing it with a ne and elegant nish. Available
in four different trendy nishes.
Novobisel
Material:
Anodized/chromed/lacquered
aluminum
Length: 2,5 m.l. (8.2”)
Dimensions:
h: 10 mm
(3/8”)
a: 12.4 mm
(0,04”)
h: 12 mm
(1/2”)
a: 16,70 mm
(0,05”)
Packaging: 30 u/box
Finishes:
Bright mirror
Brushed mirror
Matt silver
Chrome
White
Applications
Technical Features and tests
General Features
Alloy 6063 (L-3441/38-337)
Fire resistance M0 (UNE 23-727-90)
Abrasion resistance* Very good
Lightfastness* Excellent
Appearance and color* EN 12373-1
Page 1 of 3
Novobisel is a prole with several different applications. It can be installed as:
- Edge protector
- Finishing edge (countertops...)
- Medium height walls nishing
- Skirting top off
*Anodized aluminum
FICHA TÉCNICA
TECHNICAL FILE
R03.002_13/02/2016
Novobisel
Installation
Cleaning and maintenance
Page 2 of 3
Materials
1 2 3 4 5
Aluminum
As edge protector
1. Spread a big amount of thin-set mortar on the surface to be tiled.
2. Align the prole with the corner and press it to make the thin-set mortar pass through the holes of
the xing wing.
3. Place tiles on the xing wing and press them to get an optimal adhesion.
4. Continue tiling the wall.
5. Finally, clean the leftover material, remove the protective lm if necessary and let dry.
To see the video, capture this
image with your mobile phone
(QR code reader software is ne-
cessary) or click on it.
In all cases the steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric
and perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommen-
ded. Citric acid is not recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
The proles should be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry to remove excess moisture.
You can clean the anodized nishes, if dirtiness persists, with a suitable slightly abrasive cleaning pro-
ducts or with specic metal cleaners. The lacquered nishes are more delicate and must be cleaned
with neutral detergents using soft cloths with no abrasive particles that could damage the surface
treatment. You can obtain a polished nish in natural nishes by using specic metal cleaners such as
magic cotton or generic polishers.
Novobisel is a prole made by extrusion of aluminum. Anodizing improves the corrosion resistance,
mechanical resistance and appearance of proles. It has the quality seal Qualanod, which guarantees
the quality of the process and the resulting proles. This seal regulates several tests: appearance and
color, thickness measurements, sealing and impregnation control, abrasion resistance, lightfastness,
acetic saline chamber and nitric acid immersion.
The lacquered nish has a high quality and homogeneus surface. The lacquering has the quality seal
Qualicoat, which guarantees the quality of the process and the nal products.
Aluminum has excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile,
malleable and highly durable
TECHNICAL FILE
R03.002_13/12/2016
Technical Information
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
You can nd out more information about the technical features of Emac®’s products by downloading
their Technical File from www.emac.es
If you have any query, please contact our Technical Department in [email protected]
Novobisel
Indoors Outdoors Wall tiling Recyclable
Page 3 of 3
  • Page 1 1
  • Page 2 2
  • Page 3 3

Emac NBIS0112 Guide d'installation

Taper
Guide d'installation
Ce manuel convient également à

dans d''autres langues