L'Or Barista LM9012/60R1 Manuel utilisateur

English 8

Dansk 25

Deutsch 42

Español 60

Français 78

Italiano 96

Nederlands 114

Norsk 132

Português 148

Svenska 166

English

8English

General description

1 Ristretto button

2 Espresso button

3 Lungo button

4 Water tank lid

5 Water tank

6 Mains cord with plug

7 Used capsule compartment

8 Waste water drawer

9 Platform for large cups or bowls

10 Drip tray

11 Cup tray

12 Coffee outlets

13 Coffee dispensing spout

14 Capsule compartment

15 Lever

Introduction

Welcome to the L'OR Barista world! L'OR Barista is the only capsule coffee

system that allows you to brew two cups of coffee at the same time thanks to

the double spout and the exclusive L’OR Barista double-shot capsules with twice

as much coffee. The L'OR Barista coffee machine is also compatible with the L'OR

Espresso single-shot coffee capsules. Thanks to the Dual Capsule Recognition

technology, the machine automatically recognizes the capsule size and adapts

the volume accordingly. All you need to do is press the button for the type of

coffee you desire.

Capsules and capsule compatibility

The L'OR Barista coffee machine has been designed to work with L’OR Espresso

single-shot capsules and L’OR Barista double-shot capsules, as well as with

Nespresso* capsules and aluminum capsules from coffee brands produced by

Jacobs Douwe Egberts, such as Douwe Egberts, JACOBS, Jacqmotte, Jacques

Vabre, Grand Mère, L'OR, Marcilla, Moccona, Saimaza and Senseo.

*brand of a third party not connected to JACOBS DOUWE EGBERTS and / or

PHILIPS

L’OR aluminum capsules are available online at www.lorespresso.com and in

shops. You can choose from a variety of coffee capsules for different types of

coffee.

Direct start and auto switch-off

The direct start function allows you to brew the coffee you desire with just one

press of a button. After the coffee has been prepared the machine switches off

automatically to save energy.

9

English

Preparing for use

Before first use, remove all packaging materials from the machine.

When you use the machine for the first time or if you have not used it for 1 day

or longer, perform the following steps:

1Remove the water tank from the machine.

2Rinse and fill the water tank under the tap. Place the water tank back onto

the machine.

3Place a bowl under the coffee dispensing spout. Do not insert a capsule and

make sure that the lever is closed.

Note: You can remove the drip tray to create enough space to place a bowl

under the coffee dispensing spout.

4Press the lungo button.

10 English

5The machine heats up in about 25 seconds and starts rinsing. Water flows

from the coffee dispensing spout into the bowl until the internal water circuit

is empty.

Note: When the internal water circuit is empty, the machine produces a

humming sound. When the machine dispenses water, it produces a less loud

humming sound. This is normal.

6Empty the drip tray and the waste water drawer.

The machine is now ready for use.

Brewing coffee

Beverages and capsules

Beverages

Thanks to the Dual Capsule Recognition technology, the machine automatically

recognizes the capsule size and adapts the volume of your drink accordingly. All

you need to do is press the button for the type of coffee you desire.

11

English

Preparing coffee

1For one coffee, place one cup under the coffee dispensing spout.

12 English

2For two coffees, place two cups under the coffee dispensing spout.

3For a large coffee or Grand Café Filtre, remove the cup platform and the drip

tray, place the cup platform on the lower drip tray and place a large cup or

mug on the cup platform under the coffee dispensing spout.

4Lift the lever.

5Insert a capsule.

-For a single cup of coffee, insert a L'OR Espresso single-shot capsule.

-For two cups of coffee or one large coffee, insert a L'OR Barista double-

shot capsule.

13

English

6Close the lever by pushing it down.

Warning: Do not insert a finger into the brew chamber when

closing the lever to avoid injury. There is an invisible sharp

piercer on the inside of the lever.

7Press the button for the type of coffee you desire. The button lights up and

the machine starts heating up. When the heating-up process is finished, the

machine starts brewing the desired coffee.

Caution: Do not lift the lever until the brewing process has finished.

Brewing is finished when the lights stop flashing and no more coffee

comes out of the coffee dispensing spout.

8After the brewing process has finished, the machine switches off

automatically to save energy.

Brewing Grand Café Filtre

1Remove the seal completely from the capsule.

2Lift the lever and insert the capsule.

3Close the lever.

14 English

4Remove the drip tray with the cup platform. Put the drip tray aside and place

the cup platform on the lower drip tray.

5Place a large cup or mug on the cup platform under the coffee dispensing

spout.

6Press the lungo button to start the brewing process.

Drink personalization: program your drink volume

Each coffee button has been programmed to brew coffee at its ideal setting.

Nevertheless, you can personalize your drink volume to your wishes, within a

range that ensures the best coffee quality.

15

English

The volumes for normal and XXL capsules are adjusted separately:

1Fill the water tank.

2Insert a capsule and close the lever.

-If you want to adjust the volume for normal capsules, insert a L'OR single-

shot espresso capsule.

-If you want to adjust the volume for an XXL capsule, insert a L’OR Barista

double-shot capsule.

3Press and hold the button of the coffee whose volume you want to adjust for

4 seconds until the button flashes quickly. Then release the button. The

machine starts brewing coffee.

4Press the same button again when the cup contains the desired volume. The

button shows a light burst to indicate the new volume is stored.

Note: If you press the coffee button too early, the machine programs the

minimum volume shown in the table above. If you do not press the coffee

button, the machine programs the maximum volume shown in the table.

Resetting the drink volume

To reset the drink volumes to their factory settings:

1Press and hold the ristretto, espresso and lungo buttons simultaneously until

all buttons flash quickly to show that the machine has been reset to factory

settings.

16 English

Cleaning and maintenance

Cleaning the used capsule drawer and waste water drawer

Check the used capsule compartment and waste water drawer regularly.

Note: For optimal hygiene, pull up the lever after use to ensure the last used

capsule falls into used capsule compartment.

1Pull the waste water drawer and capsule compartment out of the machine.

2Remove the drip tray.

3Rinse the drip tray and the cup tray under the tap or clean them in the

dishwasher.

4Lift the used capsule compartment off the waste water drawer and empty it.

Caution: Be careful when you remove the used capsule compartment.

Capsules are still hot immediately after brewing.

17

English

5Rinse the waste water drawer and used capsule container under a tap. You

can also clean all these parts in the dishwasher.

6After cleaning, place the used capsule compartment on the waste water

drawer.

7Slide the waste water drawer with the used capsule container into the

machine.

8Place the drip tray back onto the lower drip tray. Place the cup tray on the

drip tray.

Cleaning other parts of the machine

1Clean the outside of the machine with a soft damp cloth.

Caution: Never use scouring pads, abrasive cleaning agents or

aggressive liquids such as petrol or acetone to clean the machine.

Warning: Do not insert a finger into the capsule compartment to

avoid injury. There is an invisible piercer on the inside of the

lever.

2Clean the water tank by rinsing it under a warm tap.

Note: The water tank is not dishwasher-proof.

Note: Rinse the water tank and fill it with fresh water every 24 hours.

3Pull the coffee dispensing spout off the machine.

4Rinse coffee dispensing spout under a warm tap.

18 English

5To clean the coffee dispensing spout thoroughly, open the cover.

6Rinse the coffee dispensing spout under a warm tap. You can also clean it in

the dishwasher

Cleaning the coffee circuit

Clean the coffee circuit every week to ensure you get coffee with an optimum

quality and taste.

1Place a cup under the coffee dispensing spout.

2Lift the lever to ensure the last used capsule falls into the used capsule

compartment.

3Do not insert a new capsule and close the lever.

19

English

4Press the lungo button.

5Empty the cup after the machine has finished dispensing water.

6Open the lever and repeat steps 3 to 5 to ensure proper cleaning of the

coffee circuit.

7Empty the waste water drawer.

The machine is now ready for use.

Descaling

When to descale

-Descale the machine when the ristretto and lungo button flash quickly a few

times after brewing. The descaling procedure takes up to 40 minutes and

consists of a descaling cycle and a rinsing cycle. Do not interrupt the descaling

procedure.

Why to descale

Descaling is essential for the following reasons:

-It prolongs the life of your L'OR Barista coffee machine

-It ensures maximum cup volume

-It ensures maximum coffee temperature

-The machine produces less sound during brewing

-It prevents malfunctioning

If the descaling procedure is not performed correctly, scale residue remains

behind in the machine. This causes scale to build up more quickly and may cause

permanent and irreparable damage to the machine.

Use the correct descaler

Only lactic acid-based descalers are suitable for descaling the L'OR Barista

machine. This type of descaler descales the machine without damaging it. We

20 English

advise you to use the dedicated L'OR Barista liquid descaler (CA6530) or Saeco

liquid descaler (CA6700). It is available in bottles that contain liquid descaler for

two descaling procedures. You need half a bottle for one descaling procedure

and can store the other half for the next descaling procedure.

Descaling procedure

Note: If something goes wrong during the descaling procedure, e.g. because you

accidentally interrupt the descaling cycle, you have to restart the descaling

procedure from step 1.

1Pour half a bottle of liquid descaler into the water tank.

2Fill up the water tank with fresh tap water.

3Make sure that there is no capsule in the capsule compartment.

4Close the lever.

21

English

5Place a bowl with a minimum capacity of 1.5 liters on the lower drip tray

under the coffee dispensing spout to collect the descaling solution.

6Press and hold the ristretto and lungo button for 3 seconds at the same time.

The ristretto button starts to flash and the lungo button is steady on

7The machine dispenses the entire descaling solution at regular intervals. This

takes up to 30 minutes.

-When the lungo button start to flash quickly and the ristretto button is on,

the first phase of the descaling cycle has finished

8Remove and empty the bowl. Place the bowl back onto the lower drip tray

under the coffee dispensing spout.

9Remove the water tank and rinse it under the tap. Fill the water tank with

cold tap water and place it back onto the machine.

22 English

10 Press the flashing button to start the flushing cycle. The ristretto button is on

and the lungo button flashes during the flushing phase

Note: The water tank will be emptied without interruption. The flushing cycle

lasts about 3 minutes.

11 When the flushing cycle has finished, the ristretto and lungo button flash a

few times.

Note: It is normal that some water remains behind in the water tank after the

descaling procedure.

The machine switches off. The descaling procedure is finished.

Meaning of light signals

-The selected coffee button flashes slowly: the machine is preparing your

drink.

-The selected coffee button flashes quickly: the water tank is empty, fill the

water tank with tap water.

-The selected coffee button flashes intermittently: The new coffee quantity is

saved and programming is active.

-The ristretto and lungo button flash simultaneously after brewing coffee: you

need to descale the machine.

-All three buttons flash simultaneously: the machine needs to cool down. Wait

approx. 2 minutes before you start brewing a new drink.

Troubleshooting

This chapter summarizes the most common problems you could encounter with

your machine. If you are unable to solve the problem with the information

below, visit www.lorbarista.com/support for a list of frequently asked questions

or contact the Consumer Care Center in your country.

Problem Possible cause Solution

The machine does not switch

on.

The machine is not connected to the

mains.

Put the plug in an earthed wall

socket.

The coffee does not flow out of

the machine immediately when

I press the button.

The machine needs a few seconds to

heat up before it starts brewing.

This is normal.

The brewing time is longer than

before.

The machine is clogging up with

scale.

Descale the machine.

23

English

Problem Possible cause Solution

The temperature of freshly

brewed coffee gradually

decreases.

The machine is clogging up with

scale.

Descale the machine.

The pump makes a lot of noise. There is not enough water in the

water tank.

Fill the water tank with fresh tap

water.

The water tank is not placed

correctly.

Place the water tank correctly and

push it downwards.

The machine suddenly stops

brewing coffee.

There is not enough water in the

water tank.

Fill the water tank with fresh tap

water. Press the button of the

selected type of coffee again to

continue brewing. When the cup is

full, press the same button again to

stop the brewing process.

The selected coffee button

flashes quickly.

The water tank is empty. Fill the water tank with fresh tap

water. Press the button of the

selected type of coffee again to

continue brewing. When the cup is

full, press the same button again to

stop the brewing process.

I cannot close the capsule

compartment lever completely.

Check if you use the recommended

L'OR capsule. Other capsules may

cause problems during use.

The used capsule drawer is full. Empty the used capsule drawer

and insert the capsule again.

The capsule is not inserted correctly. Insert the capsule again and check

if it is inserted correctly.

The capsule is stuck. Open and close the lever a few

times with moderate force to

remove the capsule.

The lever does not open

completely.

The used capsule drawer is full. Empty the used capsule drawer.

The machine does not dispense

coffee or only dispenses drops

of coffee.

You have not flushed the machine

before first use.

Flush the machine before first use

(see 'Preparing for use').

There is not enough water in the

water tank.

Fill the water tank with fresh tap

water.

Scale has built up inside the machine

(see 'Descaling').

Descale the machine (see

'Descaling').

Coffee grounds end up in the

cup of coffee.

A small amount of ground coffee will

always end up on the bottom of the

cup.

This is normal.

24 English

Problem Possible cause Solution

The coffee flow splits or is not

straight.

The coffee dispensing spout cap is

not placed correctly or it is missing.

Snap the coffee dispensing spout

onto the coffee outlets.

The ristretto and lungo button

lights are flashing after

brewing.

This means it is time to descale the

machine to prevent it from clogging

with scale.

Descale the machine (see

'Descaling').

Why do I find water in the

waste water drawer?

The used capsule drawer and waste

water drawer catch the residual

water released after brewing coffee.

This is normal. Empty the capsule

and waste water drawer frequently

The coffee volume is not what I

expected.

The coffee volume has been

adjusted.

Readjust the coffee volume (see

'Drink personalization: program

your drink volume ') or reset the

coffee volume (see 'Resetting the

drink volume').

My coffee is less warm. When you brew the first cup of the

day or when it has been a while since

your previous cup of coffee, the

inside of the machine is still cold

when you brew coffee.

You can pre-heat the machine and

coffee cup by brewing a cup of

coffee first without placing a

coffee capsule.

If you use a cold, thick-walled cup,

the coffee will cool down

immediately.

Use thin-walled cups, as thin-

walled cups will absorb less heat

from the coffee than thick-walled

cups. Make sure the size of the cup

matches the coffee quantity. Do

not brew a small quantity of coffee

in a large cup.

The machine is clogged with scale. Descale the machine when the

ristretto and lungo button flash

quickly a few times after brewing

(see 'Descaling').

You used cold milk. If you drink coffee with cold, fresh

milk, this will cool down your

coffee. You can prevent this by

preheating the milk.

The machine switches off after

each brewing cycle.

This is the automatic shut-off

function.

To save energy, the machine

switches off automatically after

each brewing cycle.

La page est en cours de chargement...

L'Or Barista LM9012/60R1 Manuel utilisateur

Ce manuel convient également à

L'Or Barista LM9012/60R1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents