IN THE BOX
Wyze Cam Pan × 1
USB Cable × 1
Power Adapter × 1
Quick Start Guide × 1
DANS LA BOÎTE
Panneau de la caméra Wyze × 1
Câble USB × 1
Adaptateur d’alimentation × 1
Guide de démarrage rapide × 1
DESSOUSAVANT ARRIÈRE
2
1
3
4
6
5
7
SETUP
1Lens
FRONT BACK BOTTOM
2Status Light
4Power Input 5MicroSD Slot
(SD card not included)
6SETUP Button
7Microphone
3Light Sensor
1Verre
2Lumière de
statut
4Alimentation
de courant
5Fente de MicroSD
(carte MicroSD pas incluse)
6Bouton SETUP
7Microphone
3Capteur de
lumière
SETUP
1Download the Wyze app and create an account.
2Connect the camera to a power outlet and wait for 15
seconds until the red status light flashes.
3Press the SETUP button for 3 seconds until you hear a voice
prompt.
4Follow the Wyze app to finish setup.
CONFIGURATION
Wyze Cam Pan v2
1Téléchargez l’application Wyze et créez un compte.
2Connectez la caméra à une prise de courant et attendez
15 secondes jusqu’à ce que la lumière rouge clignote.
3Appuyez sur le bouton SETUP pendant 3 secondes jusqu’à
ce que vous entendiez une voix.
4Suivez l’application pour terminer la configuration.
NEED HELP?
Contact our support team:
https://support.wyze.com
Join our Community:
https://wyze.com/community
Scan the QR code
to learn more
2
1
3
4
6
5
7
SETUP
LIGHT INDICATORS
DURING INSTALLATION
Solid blue light
The device is working properly
Flashing red light
The device is ready to connect
Flashing red and blue lights
Connection is in progress
Flashing blue light
The device is connected and finishing setup
Solid red light
The device is powered on and initializing
LIGHT INDICATORS AFTER SETUP
Solid red light
Live stream is being viewed or a recording is in progress
The device is working properly and no operations are running
Solid blue light
Quickly flashing red light
Siren is in use
INDICATIONS DE LUMIÈRE
Lumière fixe bleue
Le périphérique fonctionne correctement
Lumière clignotante rouge
Le périphérique est prêt à se connecter
Lumière clignotante rouge et bleue
Connection en cours
Lumière clignotante bleue
Le périphérique est connecté et fini sa configuration
INDICATION LUMINEUSE
APRÈS INSTALLATION
Lumière fixe rouge
Le périphérique est sous tension et est en train de démarrer
Lumière rouge solide
Streaming direct ou enregistrement en cours
Le périphérique fonctionne correctement et aucune
opération est en cours
Lumière bleue solide
Lumière clignotante rouge
Sirène active
FCC WARNING:
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
FCC RADIATION EXPOSURE
STATEMENT:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
Scan the QR code
to learn more
VOUS AVEZ BESOIN D’AIDE?
Contactez nos magiciens du soutien:
https://support.wyze.com
Rejoignez notre communauté:
wyze.com/community
ISED RSS WARNING:
This device complies with ISEDC licence-exempt RSS standard (s).
Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'ISEDC applicables aux
appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
ISED RADIATION EXPOSURE
STATEMENT:
This equipment complies with ISEDC RF radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Cet appareil est conforme aux limites d'exposition de rayonnement
RF ISEDC établies pour un environnement non contrôlé.
Cet émetteur ne doit pas être co-implanté ou fonctionner en
conjonction avec toute autre antenne ou transmetteur.
Cet équipement doit être installé et utilisé avec une distance
minimale de 20cm entre le radiateur & votre corps.
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
(1) l'appareil ne doit pas produire d'interférence, et (2) l'appareil doit
accepter toute interférence radioélectrique subie, même si
l'interférence est susceptible d'en compromettre le fonctionnement.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Tous changements ou modifications non expressément approuvés
par la partie responsable de la conformité peut annuler l’autorité
de l’utilisateur à opérer l’équipement.
Utilisez uniquement le chargeur fourni.
Only use the power supply provided.
-
1
Wyze P2-KSP01 Cam Pan v2 Indoor Smart Home Camera Mode d'emploi
- Taper
- Mode d'emploi
- Ce manuel convient également à
dans d''autres langues
Documents connexes
-
Wyze GS Color Night Vision Wired 1080p HD Indoor-Outdoor Video Camera Mode d'emploi
-
Wyze V3 Mode d'emploi
-
Wyze WVOD2 Mode d'emploi
-
-
Wyze Pro WiFi 6E Mesh Router Manuel utilisateur
-
-
-
-
Wyze WVDB1A Mode d'emploi
-
Wyze WTMSRS3PK Mode d'emploi