GoPro GoPro Manuel utilisateur

USER MANUAL + WARRANTY INFO

Join the GoPro party at facebook.com/goprocamera

to see what other GoPro owners are capturing with

their GoPros. Share some of your own footage and

contribute to the GoPro movement!

Accessories 4

Mounts 5

HD HERO2 Features 6

Firmware Update 8

Basics 8

Camera Modes 11

Advanced Menu Settings 17

Additional Menu Settings 24

Storage/SD Cards 30

System Requirements 31

Transferring Files 32

Battery Life 34

Important Warning Messages 36

Camera Assembly 37

FCC Statement 43

Warranty 44

Customer Support 45

TABLE OF CONTENTS

2 3

WEAR IT. MOUNT IT. LOVE IT. MORE AT GOPRO.COM

CORE

ACCESSORIES

Floaty Backdoor

Rechargeable Li-Ion Battery

Anti-Fog Inserts

Lens Replacement Kit

Replacement HD Housing

HD Skeleton Housing

16GB SD Memory Card

32GB SD Memory Card

PREMIUM

ACCESSORIES

3D HERO® System

LCD BacPac™

Battery BacPac™

MOUNTS

Helmet Front

Mount Chest Mount

Harness Handlebar Seatpost

Mount Surf HERO

Mounting Kit

HD Wrist Housing Head Strap Suction Cup Mount Vented Helmet

Strap

Roll Bar Mount Tripod Mount Military Helmet

Mount Grab Bag of

Mounts

Curved Adhesive

Mounts Flat Adhesive

Mounts

4 5

HD HERO2 FEATURES

1. LED Recording Lights

2. SHUTTER/SELECT Button

3. LCD Status Screen

4. HDMI Port

(cable not included)

5. SD Card Slot

6. POWER/MODE Button

HD HERO2 FEATURES

7. 2.5mm Composite Port

(cable not included)

8. Microphone

9. HERO Port

10. USB Port (ﬁle transfer/charging)

11. Battery Door

12. Buzzer

(located on camera bottom)

13. 3.5mm External Mic Input

6 7

USING YOUR HD HERO2: BASICSFIRMWARE UPDATE

DEFAULT SETTINGS SNAPSHOT

Out of the box, your

HD HERO2

camera is conﬁgured with the following featured

default settings:

Camera Mode: Video

Video Resolution: 960p-30fps

Field of View: 170º Wide

Still Photo Resolution: 11 Megapixels

Time Lapse Interval: 1 second

Power Up Mode: Video

 See SETTINGS MENU for more information on the camera’s default settings

and instructions on how to change them.

GoPro releases new camera features through ﬁrmware updates.

Visit gopro.com/ﬁrmware to download the latest updates.

GETTING STARTED

Before using the HD HERO2 for ﬁrst time:

1. Insert a SD memory card into the SD card slot.

Your

HD HERO2

is compatible with SD + SDHC memory cards (Class 4 or

higher rated cards are recommended).

 See STORAGE/SD CARDS for more information.

2. Install the battery into your HD HERO2 camera.

3. Charge the battery.

The lithium-ion battery included with your

HD HERO2

ships only partially

charged. For a full charge, use the USB cable to plug the camera into a power

source such as a computer or USB charging device. No damage will occur to

your battery if you are not able to charge it before using your camera.

 See BATTERY LIFE for more information.

8 9

USING YOUR HD HERO2: BASICS

POWERING ON AND OFF

To power ON the HD HERO2:

Press and release . The LED Recording Light on the front of the camera will

ﬂash three times and the Buzzer will emit three short beeps.

To power OFF the HD HERO2:

Press and hold

for two seconds. The LED Recording Light will ﬂash seven

times and the Buzzer will emit seven quick beeps.

PRO

TIP:

You can change the

HD HERO2

default settings to start in

One Button Mode, which sets the camera to immediately

begin recording once it is powered on.

 See ONE BUTTON MODE for more information.

OVERVIEW

Once the

HD HERO2

is powered on, each press of

will cycle through the camera’s

recording modes and settings menu in the following order:

VIDEO

Record video

PHOTO

Take single photos

BURST

Take 10 photos in 1 second

TIME LAPSE

Take a photo every 0.5, 1, 2, 5, 10, 30, and 60 seconds

SELF TIMER

Take a single photo aer a 10-second countdown

SETTINGS

Change the camera’s conﬁguration

Each camera mode can be changed in the Settings menu.

 See ENTERING THE SETTINGS MENU for more information.

USING YOUR HD HERO2: CAMERA MODESUSING YOUR HD HERO2: BASICS

10 11

RECORDING VIDEO

Verify that the camera is in Video Mode, indicated by on the LCD. If not, press

repeatedly until the camera displays the Video Mode icon.

• To begin recording video:

Press and release . The camera will emit one beep and the LED

Recording Light will ﬂash while recording continues.

• To stop recording:

Press and release . The LED Recording Light will ﬂash three times and

the camera will emit three beeps to indicate recording has stopped.

HD HERO2

will automatically stop recording when either the SD card is full or the

battery runs out of power. Your video will be saved before the camera powers oﬀ.

While recording video, the LCD will display the currently selected

video resolution, lens ﬁeld of view (FOV), the elapsed time of the

current recording, and the remaining recording time determined

by the free space on your SD card.

When recording is stopped, the LCD shows the number of video

ﬁles stored on the SD card in place of the elapsed recording time.

PRO

TIP:

When the camera is set to One Button Mode, hold for

two seconds to enter the Settings screen, where you can

quickly turn OFF One Button Mode.

 See ONE BUTTON MODE for more information.

TAKING SINGLE PHOTOS

Verify that the camera is in Photo Mode, indicated by on the LCD. If not, press

repeatedly until the camera displays the Photo Mode icon.

To take a photo:

Press and release . The camera will beep once and the LED

Recording Light will ﬂash once to indicate a photo has been taken.

In Photo mode:

The LCD screen will display your currently selected photo

resolution (11MP, 8MP or 5MP), the number of photos stored on

your SD card, and the number of photos that can be taken before

the card is full.

PRO

TIP:

If you think your SD card will ﬁll up before you are able to

transfer your ﬁles, select the 5MP option under the Photo

settings menu. 5MP ﬁles are smaller than 11MP ﬁles,

allowing your SD card to store more photos.

 See PHOTO RESOLUTION MODES for more information.

USING YOUR HD HERO2: CAMERA MODESUSING YOUR HD HERO2: CAMERA MODES

12 13

TIME LAPSE PHOTO MODE

Time Lapse Photo Mode is used to take a series of photos at 0.5, 1, 2, 5, 10,

30 or 60 second intervals (when using 0.5 seconds, it is recommended to use a

class 10 or higher SD card).

 See TIME LAPSE PHOTO MODE in advanced settings for instructions on how

to change the interval setting.

• Verify the camera is in Time Lapse Mode, indicated by on the LCD

screen. If not, press repeatedly until the camera displays the Time

Lapse Mode icon.

• Press the button once to begin taking Time Lapse photos. The LED

Recording Light will ﬂash each time a photo is taken.

• Press once to stop taking Time Lapse photos. The LED Recording Light

will ﬂash three times and the camera will emit three beeps to indicate Time

Lapse has stopped.

As in Photo Mode, the LCD screen will display your currently

selected photo resolution (11MP, 8MP or 5MP), the number of

photos stored on your SD card, and the number of photos that

can be taken before the card is full.

USING YOUR HD HERO2: CAMERA MODESUSING YOUR HD HERO2: CAMERA MODES

PHOTO BURST MODE

In Photo Burst Mode, the camera will take 10 photos in 1 second.

• Verify the camera is in Burst Mode, indicated by on the LCD screen.

If not, press repeatedly until the camera displays the Burst Mode icon.

• Press and release once to take a photo burst of ten photos over one

second. The LED Recording Light will ﬂash and the camera will beep 10

times to indicate the photos have been taken.

As in Photo Mode, the LCD screen will display your currently

selected photo resolution (11MP, 8MP or 5MP), the number of

photos stored on your SD card, and the number of photos that

can be taken before the card is full.

PRO

TIP:

Compared to single Photo Mode, Burst Mode gives you 10

times as many chances to capture that “can’t miss” moment.

14 15

USING YOUR HD HERO2: CAMERA MODES ADVANCED MENU SETTINGS

SELFTIMER MODE

In Self-Timer Mode, the

HD HERO2

will take a single photo at the end of a

10-second countdown.

• Verify that the camera is in Self-Timer Mode, indicated by on the LCD. If

not, press repeatedly until the camera displays the Self-Timer Mode icon.

• To take a photo, press and release . The camera will beep and the LED

Recording Light will ﬂash during the countdown, ending with a series of

rapid beeps and ﬂashes just before the photo is taken.

• To stop the countdown timer, press .

As in Photo Mode, the LCD screen will display your currently

selected photo resolution (11MP, 8MP or 5MP), the number of

photos stored on your SD card, and the number of photos that

can be taken before the card is full.

ENTERING THE SETTINGS MENU

Using the Settings Menu, many of the functions of the

HD HERO2

can

be customized based on your shooting needs.

To access your HD HERO2 settings:

1. Make sure your camera is powered ON.

2. Cycle through camera modes using until the LCD Status Screen shows

the SETTINGS icon.

3. To enter into the Settings Menu, press .

4. Use to toggle through each camera setting mode.

5. Every settings mode has a list of options. Press to enter into a speciﬁc

mode. The option which is currently active will be highlighted. Press to

toggle through the list. Press to select highlighted option and exit list.

6. Press to cycle to the next camera setting mode or press to display

current option list again.

16 17

DEFAULT MODE AT POWER UP

Select which camera mode is active (or default) when you power on your camera.

VIDEO (Default) PHOTO BURST TIME LAPSE

VIDEO RESOLUTION MODES

Your HD HERO2 camera shoots the following video resolutions:

Resolution/

FPS Field of View Screen

Resolution Best Use

1080-30 170º / 127º 1920x1080 Highest resolution.

960-48

(Slow motion)

170º

wide angle 1280x960 This resolution provides the widest

top-to-bottom and side-to-side viewing

area. Great for slow motion.

960-30

(Default)

170º

wide angle 1280x960 This resolution provides the widest

top-to-bottom and side-to-side

viewing area.

VIDEO RESOLUTION MODES : CONT’D

Resolution/

FPS Field of View Screen

Resolution Best Use

720-60

(Slow motion)

170º

wide angle

1280x720 For mounting on vehicles or gear

when a max side-to-side wide angle is

desired but vertical viewing area is not

as important. Great for slow motion.

720-30 170º

wide angle

1280x720 For mounting on vehicles or gear

when a max side-to-side wide angle is

desired but vertical viewing area is not

as important.

WVGA-120

(Super slow

motion)

170º

wide angle

848x480 For smaller data ﬁles. This is standard

deﬁnition resolution. Great for super

slow motion.

WVGA-60

(Super slow

motion)

170º

wide angle

848x480 For smaller data ﬁles. This is

standard deﬁnition resolution.

Great for slow motion.

When you are using the camera in Video Mode, the currently

selected video resolution appears on the LCD Status Screen

beneath the Video mode icon.

PRO

TIP:

Consider using 960-48 when wearing camera on a helmet or

a chest harness to see your handlebars when biking, or knees

and skis when skiing.

ADVANCED MENU SETTINGSADVANCED MENU SETTINGS

18 19

TIME LAPSE MODES

You can select a wide range of time intervals for your Time Lapse Mode photos.

Choose between 0.5, 1 (Default), 2, 5, 10, 30 and 60 seconds.

UPSIDE DOWN VIDEO/IMAGE MODE

If you need to mount your camera upside down, you can set the camera to save

the photo or video upside down so that it appears right side up when you review

it on your computer or TV. This eliminates the need to “ﬂip” the photo or video

later on your computer.

(Default) Camera right side up

Camera upside down

SPOT METER SETTINGS

Turn on the Spot Meter when you are ﬁlming from a dark space into a brighter

setting, like when ﬁlming outdside a windshield from inside a car.

OFF (Default)

ON

Note: The Spot Meter icon is displayed in the upper-right corner of the LCD

when Spot Metering is on.

FIELD OF VIEW MODES

When recording video in 1080p, you can set the camera to shoot in the default

wide-angle (170º) or a medium-wide angle (127º) ﬁeld of view.

 See VIDEO RESOLUTION MODES for more information.

WIDE 170º (Default)

MEDIUM

127º

PHOTO RESOLUTION MODES

The

HD HERO2

can take photos in either 11MP, 8MP or 5MP resolutions.

Changing this setting eﬀects photos taken in Photo, Burst, Self Timer and Time

Lapse Modes.

11MP

(Default)

8MP

5MP

When you are using the camera in one of the photo modes, the

currently selected photo resolution appears on the LCD beneath

the Photo Mode icon.

ADVANCED MENU SETTINGSADVANCED MENU SETTINGS

20 21

ADVANCED MENU SETTINGSADVANCED MENU SETTINGS

ONE BUTTON MODE

One Button Mode forces the camera to automatically begin recording in its

default power up mode once the camera is ON. When One Button Mode is ON,

is disabled. To stop recording, you must turn your camera OFF.

OFF (Default)

ON

To turn One Button Mode ON:

1. Access the Settings Menu ( See ENTERING THE SETTINGS MENU for

more information.)

2. Use to cycle through the settings menus until the One Button Mode

menu appears.

3. Press to access the One Button Mode menu.

4. Press once to select ON and press once to conﬁrm selection.

5. Press to cycle through settings menu. Select and press EXIT.

PRO

TIP:

In One Button Mode, the camera is either “on and recording” or

powered OFF. This simpliﬁes camera operation when loaning

the camera to a friend or when you know you only want to shoot

in one mode.

ONE BUTTON MODE CONT’D:

To turn One Button Mode OFF:

1. While the camera is ON and recording, press and hold for two seconds

until the settings icon appears.

2. Enter the settings menu by pressing .

3. Use to cycle through the settings menu until appears. Press to

enter One Button Mode menu.

4. Press once to select OFF and press to conﬁrm selection.

5. Press to cycle through the settings menu. Select and press EXIT.

22 23

ADDITIONAL MENU SETTINGSADDITIONAL MENU SETTINGS

MORE MENU SETTINGS

To access additional settings, enter MORE menu. The following

settings are found in this subsection:

DELETE

Delete last ﬁle or delete all ﬁles and reformat SD card.

CANCEL (Default)

LAST

ALL/REFORMAT

To delete the last ﬁle saved:

1. With the Delete settings menu screen displayed, press to enter into

the delete list.

2. Within the delete menu you can toggle through the list by using to

choose one of the following options:

• CANCEL: To cancel out of delete, Press and return to the main

settings menu.

• LAST: To delete the last ﬁle saved, Press to select menu option. The

LCD will display a conﬁrmation menu. Within this menu you can toggle

through the menu options using .

The menu options are:

NO: Press to cancel and return to the main settings menu.

YES: Press to select yes. The last ﬁle saved will be deleted.

• ALL/Format SD Card: To delete all ﬁles on the SD Card, press to select

menu. The LCD will display a conﬁrmation menu. Within this menu you can

toggle through the menu options using .

The menu options are:

NO: Press to cancel and return to the main settings menu

YES: Press to select yes. All ﬁles will be deleted. During

the delete all process, the LED lights will continue to blink

until formatting is complete.

DELETE CONT’D:

24 25

CAMERA SOUND

You can change volume level of the camera’s beep to be soer than the

default or silent for stealth mode.

100% (Default)

70%

OFF

AUTO POWER OFF

Program the camera to automatically turn OFF aer a speciﬁc period of

inactivity (when no videos or photos are being taken and no buttons have been

pressed). If you set the camera to MANUAL, you will need to manually turn your

camera OFF.

MANUAL (Default)

60sec

120sec

300sec

ADDITIONAL MENU SETTINGSADDITIONAL MENU SETTINGS

NTSC / PAL

This setting controls both the video recording frame rate and playback of

video from the camera when viewing on a TV. Select NTSC if viewing on a

TV in North America. Choose PAL if viewing on a PAL TV (most televisions

outside of North America) or if viewing on a PAL TV in any region.

NTSC (Default)

PAL

ON SCREEN DISPLAY OSD

Select if you would like to display or hide the recording icons and information

on your video screen (when displaying live video on a TV screen or using the

LCD BacPac™). OFF will hide icons and ON will display icons.

OFF (Default)

ON

LED LIGHTS

You can choose between having all 4 LED lights active, only 2 LED lights

active (front and back) or turn OFF all the LED lights.

4 (Default)

2

OFF

26 27

ADDITIONAL MENU SETTINGS

DATE / TIME / MONTH

You can set the camera’s internal clock to ensure that your video and photo

ﬁles are saved with the correct date/time information. You will need to adjust

the date/time information if the battery is removed from the camera for an

extended period of time.

Month / Day / Year Hour / Minute

1. Press repeatedly until Date/Time/Month appears on the LCD.

2. Press to begin setting the date and time.

3. The LCD will show the Date/Time/Month setting menu with the Month ﬁeld

highlighted. Press to access the list of months (1 to 12).

4. Use to cycle through the list until the correct month is highlighted.

5. Press to select the highlighted month.

6. The Date/Time/Month setting menu will appear on the LCD. Press once to

highlight the Day ﬁeld and press to access the list of days (1 to 31).

7. Again use to highlight the correct day and to select it.

8. Repeat this process for the Year, Hour and Minute.

PRO

TIP:

The Date/Time/Month ﬁelds are abbreviated. For example, the

month is MM, day is DD, Year is YY, hour is HH, minute is MM.

EXIT SETTINGS MENU

From the EXIT screen, press to return to the camera’s default camera mode.

ADDITIONAL MENU SETTINGS

28 29

The

HD HERO2

camera is compatible with 2GB, 4GB, 8GB, 16GB and 32GB

capacity SD and SDHC memory cards. While all speed cards will work in the

camera, GoPro recommends higher speed cards (labeled as Class 4 or higher)

when shooting HD video. GoPro recommends using name brand SDHC cards for

maximum reliability in high vibration activities.

To insert a SD card: To remove a SD card:

1. Insert SD card into the SD card slot

with the SD card label facing the

front of the camera.

2. The SD card will click into place

once it is fully inserted.

1. Place your ﬁngernail against the

edge of the SD card and lightly

press it further into the camera.

2. The card will spring out from the

camera far enough for you to

pull it out.

STORAGE/SD CARDS

The

HD HERO2

camera is compatible with Microso® Vista, 7 or later and Mac

OS X 10.5 or later.

System Requirements for full High Deﬁnition 1080p and 720p 60fps playback:

WINDOWS MAC

Microso Windows® Vista 7+ Mac OS® X 10.4.11 or later

3.2GHz Pentium 4 or faster 2.0GHz Intel Core Duo or faster

DirectX 9.0c or later At least 2GB of system RAM

Video card with at least 128MB of RAM Video card with at least 128MB of RAM

At least 2GB of system RAM

PRO

TIP:

If you are having problems achieving smooth playback on your

computer, the

HD HERO2

camera can also plug directly into a

High Deﬁnition TV with an HDMI port using a mini-HDMI cable or

via composite cable (not included). The

HD HERO2

camera itself

provides very smooth playback on an HDTV.

SYSTEM REQUIREMENTS

30 31

TRANSFERRING FILES

TO TRANSFER VIDEO AND PHOTO FILES TO A COMPUTER

On a PC:

1. Connect the camera to a computer with the included USB cable.

2. Turn on the camera by pressing .

3. On your PC, double click My Computer and locate the “Removable Disk”

icon. If you do not see it, close the My Computer folder and then reopen it.

The “Removable Disk” icon should appear.

4. Double click the “Removable Disk” icon.

5. Double click the “DCIM” folder icon.

6. Double click the “100GOPRO” icon.

7. Your photo and video ﬁles will be in the “100GOPRO” folder.

8. Copy/Move ﬁles to the computers hard drive and then select video/photo

for playback from desktop/hard drive.

On a Mac:

1. Plug the camera into your Mac with the included USB cable.

2. Turn on camera on by pressing .

3. The Mac will recognize the camera as an external hard drive. Double click

the icon for the external drive to access your video and photo ﬁles.

4. Copy/Move ﬁles to the computers hard drive and then select video/photo

for playback from desktop/hard drive.

IMPORTANT TIP FOR MAC USERS: When deleting ﬁles from your SD card you

must empty the trash before removing the SD card or unplugging the camera.

If you do not empty your trash the photo and video ﬁles will not be completely

erased from your SD card.

TRANSFERRING FILES

TO VIEW PHOTOS AND VIDEO ON A TV OR HDTV

Using an HDMI cable (not included), plug your HD HERO2 camera into your TV. You

can also use the composite port and a composite cable (not included).

Once connected:

With the camera powered ON, navigate to the Playback Setting

using . Press to enter the Playback menu.

Within the playback menu, use to toggle through the menu list. Use to

select each item.

The menu list options are:

Video:

Displays all video ﬁles on the SD card. During playback, volume

adjustment can be made via the TV. Playback will begin automatically.

Photo: Displays all photo ﬁles on the SD card.

All (Default): Displays all photo and video ﬁles on the SD card.

Exit: Exits the playback menu.

PRO TIP:

To Forward, press To Fast Forward, hold down

To Reverse, press To Rewind, hold down

To Exit playback at anytime, eject the

HDMI/Composite cable from the camera

To Navigate back to the menu list while in playback,

hold down both and together for 3 seconds

NOTE: Make sure your camera is set to the correct NTSC (North America)

or PAL (outside North America) video settings or your camera will not work

properly with your TV. You must also have an SD card with recorded information

loaded into your HD HERO2 camera. If there are no video or photo ﬁles stored

on your SD card you will see a

No Video

,

No Photo

, or

No Files

message.

 See NTSC/PAL for more information.

32 33

BATTERY LIFE

Fully charged, the

HD HERO2

’s battery will provide approximately 2.5 hours

of video recording time in 720p30. The LCD displays the battery meter in

every camera mode so that you can monitor how much power remains in the

battery. The battery meter will blink when the battery drops below 20% charge.

Spare batteries and additional charging accessories are available at gopro.com

and from authorized GoPro resellers.

CHARGING BATTERY

The LCD’s battery icon will blink when the battery drops below 20%. If you are

recording when the battery reaches 0%, the camera will save the ﬁle and turn OFF.

To charge the battery:

1. Connect the camera to a computer

or USB power supply with the

included USB cable.

2. LED remains ON while the battery

is charging.

3. LED will turn OFF when the battery

is fully charged.

The camera’s battery will charge to 80% charge in 1-2 hours and 100% in four

hours (depending on USB power output). It will charge to 80% in one hour and

100% in two hours when using GoPro’s 1000mAh USB-compatible wall or car

charger. Learn more about GoPro’s 1000mAh chargers at gopro.com.

BATTERY LIFE

USING THE CAMERA WHILE CHARGING

You can charge the camera’s battery while recording video or taking photos.

Simply plug the camera into any USB-based wall, car, or phone charger to

charge the

HD HERO2

camera while recording video or photos. It is best to use

GoPro’s 1 amp (1000mAh) charger for maximum charging performance while

the camera is in use.

REMOVING THE BATTERY FROM THE CAMERA

The

HD HERO2

battery is designed to have a very tight ﬁt to maximize reliability in

high vibration activities. In most cases it is not necessary to remove the battery.

To remove the battery:

1. Remove the battery door by placing your thumb on the indentation in the

battery door (on the bottom of the camera) and ﬁrmly pressing it away from

the camera.

2. Squeeze both sides of the battery and pull it out of the camera. It is

intentionally not easy to do, but the battery will come out.

34 35

IMPORTANT WARNING MESSAGES

“NO SD” MESSAGE ON THE LCD

“NO SD” indicates that there is no SD card present. The

HD HERO2

requires an SD card to record video or take photos.

 See STORAGE/SD CARDS for more information.

FILE REPAIR ICON ON THE LCD

If you see the File Repair icon, your video ﬁle was corrupted during

recording for some reason. Press any button and the camera will

repair the ﬁle.

TEMPERATURE WARNING ICON ON THE LCD

The Temperature Warning icon will appear on the LCD when the

camera has become too hot and needs to cool down. Simply let it sit

and cool before attempting to use it again. Your camera will not allow

itself to overheat —so do not worry, as no damage has occurred.

ASSEMBLING THE CAMERA

The

HD HERO2

camera housing is waterproof to 197 feet / 60 meters and

constructed of polycarbonate and stainless steel for ultimate durability.

To assemble the camera into the housing:

1. Place the camera into the housing.

2. Close the housing door.

3. Hook latch under groove on the backdoor.

4. Push down on thumb latch until it locks into place.

CAMERA ASSEMBLY

36 37

CAMERA ASSEMBLY

Your

HD HERO2

housing comes with two types of backdoors—waterproof and

skeleton. To swap out a backdoor, click the door oﬀ its hinge. To attach the other

backdoor, click it back on the hinge.

Skeleton Backdoor Waterproof Backdoor

The Skeleton backdoor (non-waterproof)

provides better sound quality by allowing

more sound to reach the camera’s

microphone. It also reduces wind noise

at speeds up to 100mph when mounted

on helmets, motorcycles, bike and other

fast-moving vehicles. Use this backdoor

only when water damage is not a risk.

This backdoor is also recommended for

use inside vehicles.

The waterproof backdoor makes

the housing waterproof to 197

feet / 60 meters. Use this door

when you need to protect the

camera from water and other

environmental hazards.

PRO

TIP:

Apply RAIN-X or a similar anti-beading solution to the housing

lens to prevent water-spots from forming when using your

camera in rain or water. When RAIN-X is not available,

periodically licking your lens is a good backup solution.

CAMERA ASSEMBLY

SWAPPING HOUSING DOORS

Your HD HERO2 housing comes with two types of backdoors—waterproof

and skeleton.

To swap out a backdoor:

1. Open the backdoor of the housing so that it is hanging downwards.

2. Pull downwards on the backdoor until it snaps free from the hinge.

3. Line up replacement backdoor into the hinge opening.

4. Push upwards on the backdoor until it clicks into place.

38 39

La page charge ...

GoPro GoPro Manuel utilisateur

Ce manuel convient également à

GoPro GoPro Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents