Samsung RH30H9500SR/AA-00 Le manuel du propriétaire

user manual

100 %

Recycled Paper

]

/

This manual is made with 100 % recycled paper.

the possibilities

Thank you for purchasing this Samsung product

Free Standing Appliance

Cont nt,s

SAFETY INFORMATION ........................................................................ 2

SETTING UP YOUR SIDE-BY-SIDE REFRIGERATOR ................................. 9

OPERATING THE SAMSUNG SIDE-BY-SIDE REFRIGERATOR ..................... 20

TROUBLESHOOTING ........................................................................... 34

C

SAFETY INFORMATION

Before using your new Samsung Side-By-Side

Refrigerator, please read this manual thoroughly to

ensure that you know how to operate the features

and functions that your new appliance offers safely

and efficiently.

This appliance is not intended for use by persons

(including children) with reduced physical,

sensory, or mental capabilities, or those who lack

experience and knowledge, unless they have been

given supervision or instruction concerning the use

of the appliance by a person responsible for their

safety.

Because the following instructions cover various

models, the characteristics of your refrigerator may

differ slightly from the refrigerator described in this

manual.

If you have any question, contact us at

1-800-SAMSUNG or find help and information

online at www.samsung.com.

Important safety symbols and

precautions:

/iX WARNING

Hazards or unsafe practices that may result in

severe personal injury or death.

Z_ CAUTION

Hazards or unsafe practices that may result in

minor personal injury or property damage.

Do NOT attempt.

Do NOT disassemble.

_ Do NOT touch.

Follow directions carefully.

Unplug the power plug from the wall

socket.

Make sure the refrigerator is grounded to

3revent electric shock.

Call the contact center for help.

Note.

These warning symbols are here to prevent

injury to you and others.

Please follow them carefully.

After reading this section, keep it in a safe

place for future reference.

Engl sh - 2

,,_ WARNING

CRITICAL INSTALLATION

WARNINGS

• Do not install the refrigerator in a damp

location or place where it may come in

contact with water.

Deteriorated insulation on electrical parts may

cause an electric shock or fire.

• Do not place this refrigerator in direct sunlight

or expose it to the heat from stoves, room

heaters, or other appliances.

• Do not plug several appliances into the same

multiple power strip.

The refrigerator should always be plugged into

its own individual electrical outlet which has a

voltage rating that matches the voltage listed

on the refrigerator's rating plate.

This provides the best performance and

also prevents overloading of house wiring

circuits, which could cause a fire hazard from

overheated wires.

• Ifthe wall socket is loose, do not insert the

power plug.

There is a risk of electric shock of fire.

• Do not use a power cord that has cracks or

abrasion damage along its length or at either

end.

• Do not bend the power cord excessively or

place heavy objects on it.

• Do not twist or tie the power cord.

• Do not hook the power cord over a metal

object, place a heavy object on the power

cord, insert the power cord between objects, or

push the power cord into the space behind the

appliance.

• When moving the refrigerator, be careful not to

roll over or damage the power cord.

This may result in an electric shock or fire.

• Never unplug your refrigerator by pulling on the

power cord.

Always grip the plug firmly and pull straight out

from the outlet.

Damage to the cord may cause a short-circuit,

fire, and/or electric shock.

• Do not use aerosols near the refrigerator.

Using aerosols near the refrigerator may cause

an explosion or fire.

• Do not install this appliance near a heater or

inflammable material.

• Do not install this appliance in a humid, oily,

or dusty location, or in a location exposed to

direct sunlight or water (rain, etc.).

• Do not install this appliance in a location where

gas may leak.

This may result in an electric shock or fire.

• This refrigerator must be properly

located and installed in accordance

with the instructions in this manual

before you use it.

• Connect the power plug in the proper position

with the cord hanging down.

Ifyou connect the power plug upside down, the

wire can get cut off and cause a fire or electric

shock.

• When moving the refrigerator, be careful not to

roll over or damage the power cord.

This constitutes a fire hazard.

• Make sure that the power plug is not crushed

or damaged by the back of the refrigerator.

• Keep the packing materials out of reach of

children.

There is a risk of death from suffocation if a

child puts the packing materials on his or her

head.

• The appliance must be positioned so that the

plug is accessible after installation.

Failing to do so may result in an electric shock

or fire due to electric leakage.

• You need to remove all the protective plastic

film before you initially plug the product in.

• The refrigerator must be safely

grounded.

Always make sure that you have grounded the

refrigerator before attempting to investigate or

repair any part of the appliance.

Power leakages can cause severe electric

shock.

Never use gas pipes, telephone lines, or other

potential lightning attractors as an electrical

ground.

Improper use of the grounding plug can result

in a risk of electric shock.

If it is necessary to use an extension cord, use

only a 3-wire extension cord that has a 3-blade

grounding plug and a 3-slot receptacle that will

accept the plug on the appliance.

The marked rating of the extension cord should

beAC 115-120 V, 10A, or more.

If a grounding adapter is used, make sure the

Enal sh - 3

receptacleboxisfullygrounded.

Plugthepowerplugintothewallsocketfirmly.

Donotuseadamagedpowerplug,damaged

powercord,orloosewallsocket.

Thismayresultinanelectricshockorfire.

Ifthesupplycordisdamaged,itmust

bereplacedbythemanufacturer,its

serviceagentorsimilarlyqualified

personsinordertoavoidahazard.

z_ CAUTION

INSTALLATION CAUTIONS

• Allow sufficient space around the

refrigerator and install it on a flat

surface.

Ifyour refrigerator is not level, cooling efficiency

and durability decrease.

Keep the ventilation space in the appliance

enclosure or mounting structure clear of

obstructions.

Allow the refrigerator to stand for two hours

after it has been installed and turned on before

loading it with food.

We strongly recommend you have a qualified

technician or service company install the

refrigerator.

Failing to do so may result in an electric shock,

fire, explosion, 9roblems with the product, or

injury.

When installing the refrigerator, make sure both

legs contact the floor for secure installation.

Legs are located at the bottom back of each

door.

Insert a flathead screwdriver and turn it in the

direction of the arrow until it is level.

Always balance the load on each door.

Overload on any one door may fell the

refrigerator, causing physical injury.

_ WARNING

CRITICAL USAGE WARNINGS

• Do not insert the power plug into a wall

socket with wet hands.

• Do not store articles on the top of the

appliance.

When you open or close the door, the articles

may fall and cause personal injury and/or

material damage.

• Do not insert hands, feet or metal objects (such

as knives, etc.) into the bottom or the back of

the refrigerator.

This may result in an electric shock or injury.

Any sharp edges may cause a personal injury

• Do not put a container filled with water on the

refrigerator.

If spilled, there is a risk of fire or electric shock.

• Children should be supervised to ensure that

they do not play with the appliance.

Keep fingers out of "pinch point" areas.

Clearances between the doors and cabinet are

necessarily small. Be careful when you open

the doors if children are in the area.

• Do not let children hang on the door.

A serious injury may occur.

• Do not let children go inside the refrigerator.

They could become trapped.

• Do not insert your hands into the bottom area

under the appliance.

Any sharp edges may cause personal injury.

• Do not let children step on a drawer cover.

The drawer may break and cause them to slip.

• Do not overfill the refrigerator with food.

When you open the door, an item may fall out

and cause personal injury or material damage.

• Do not touch the inside walls of the freezer or

products stored in the freezer with wet hands.

This may cause frostbite.

• Never put fingers or other objects into the water

dispenser hole, ice chute, or ice maker bucket.

It may cause personal injury or material

damage.

• Do not use or place any substances sensitive

Engl sh - 4

totemperaturesuchasflammablesprays,

flammableobjects,dryice,medicine,or

chemicalsnearorinsidetherefrigerator.

• Donotkeepvolatileorflammableobjects

orsubstances(suchasbenzene,thinner,

propanegas,alcohol,ether,LPgas,etc.)inthe

refrigerator.

Thisrefrigeratorisforstoringfoodonly.

Thismayresultinfireorexplosion.

• Donotstorepharmaceuticalproducts,scientific

materials,ortemperaturesensitiveproductsin

therefrigerator.

Productsthatrequirestricttemperature

controlsmustnotbestoredintherefrigerator.

• Donotplaceoruseanelectricalappliance

insidetherefrigerator,unlessitisofatype

recommendedbythemanufacturer.

• Donotstandontopoftheapplianceorplace

objects(suchaslaundry,lightedcandles,

lightedcigarettes,dishes,chemicals,metal

objects,etc.)ontheappliance.

Thismayresultinanelectricshock,fire,

problemswiththeproduct,orinjury.

• Donotputacontainerfilledwithwateronthe

appliance.

Ifspilled,thereisariskoffireorelectricshock.

• Donotusemechanicaldevicesoranyother

meanstoacceleratethedefrostingprocess,

otherthanthoserecommendedbythe

manufacturer.

• Donotdamagetherefrigerantcircuit.

• Donotsprayvolatilematerialsuchas

insecticideontothesurfaceoftheappliance.

Aswellasbeingharmfultohumans,itmayalso

resultinanelectricshock,fire,orproblemswith

theproduct.

• NeverstaredirectlyattheUVLEDlampforlong

periodsoftime.

Thismayresultineyestrainduetothe

ultravioletrays.

• Donotattempttorepair,disassemble,

ormodifytherefrigeratoryourself.

Donotuseanyfuse(suchascooper,steelwire,

etc.)otherthanastandardfuse.

Ifyourrefrigeratorneedstoberepairedor

reinstalled,contactyournearestservicecenter.

Failingtodosomayresultinanelectricshock,

fire,problemswiththeproduct,orinjury.

IftheinteriororexteriorLEDlamphasgone

out,pleasecontactyournearestservicecenter.

• Childrenshouldbesupervisedto

ensurethattheydonotplaywiththe

appliance.

Keepfingersoutof"pinchpoint"areas.:

Clearancesbetweenthedoorsandcabinetare

necessarilysmall.

Becarefulwhenyouopenthedoorsifchildren

areinthearea.

• Donotletchildrenhangonthedoor.

Aseriousinjurymayoccur.

• Donotletchildrengoinsidetherefrigerator.

Theycouldbecometrapped.

• Bottlesshouldbestoredtightlytogethersothat

theydonotfallout.

• Thisproductisintendedonlyforthestorageof

foodinadomesticenvironment.

• Ifagasleakisdetected,avoidanynaked

flamesorpotentialsourcesofignition,andair

theroominwhichtheapplianceisstandingfor

severalminutes.

Donottouchtheapplianceorpowercord.

Donotuseaventilatingfan.

Asparkmayresultinanexplosionorfire.

• UseonlytheLEDLampsprovidedbythe

manufactureroritsserviceagents.

• Iftherefrigeratoremitsaburningsmell

orsmoke,unplugtherefrigerator

immediatelyandcontactyour

SamsungElectronicsservicecenter.

• Ifyouexperiencedifficultychanginganon-LED

light,contactaSamsungservicecenter.

• IftheproductisequippedwithLEDLamps,do

notdisassembletheLampCoversandLED

Lampsyourself.

Pleasecontactyourserviceagents.

• Ifdustorwaterenterstherefrigerator,unplug

therefrigeratorandcontactyourSamsung

Electronicsservicecenter.

Thereisariskoffire.

Englsh-5

,,_ CAUTION

USAGE CAUTIONS

• Do not re-freeze frozen foods that have

thawed completely.

Do not place carbonated or fizzy drinks

in the freezer compartment.

Do not put bottles or glass containers

in the freezer.

When the contents freeze, the glass may break

and cause personal injury.

• Use only the ice maker provided with the

refrigerator.

• Have the refrigerator's water supply connected

only to a potable water supply.

To operate the ice maker properly, water

pressure of 20 - 125 psi (138 - 862 kPa) is

required.

Ifyou will be away from home for a long period

of time (on vacation, for example) and won't

be using the water or ice dispensers, close the

water valve.

Otherwise, water leakage may occur.

• Ifyou won't be using the refrigerator for a very

long period of time, (3 weeks or more) empty

the refrigerator including ice bucket, unplug it,

close the water valve, wipe excess moisture

from the inside walls, and leave the doors open

to prevent odors and mold.

• Service Warranty and Modification.

• Any changes or modifications

performed by a 3rd party on this

finished appliance are not covered

under Samsung warranty service, nor is

Samsung responsible for safety issues

that result from 3rd party modifications.

• Do not block the air vents inside the refrigerator.

Ifthe air vents are blocked, especially with a

plastic bag, the refrigerator can be over cooled.

Ifthis cooling period lasts too long, the water

filter may break and cause water leakage.

• Ifthe refrigerator is disconnected from the

power supply, you should wait for at least five

minutes before plugging it back in.

• Ifyou have a long vacation planned or do not

intend to use the refrigerator for a long period of

time, (3 weeks or more) empty the refrigerator

including ice bucket, pull out the power plug,

close the water valve, wipe excess moisture

from the inside walls, and leave the doors open

to prevent odors and mold.

• To get the best performance from the product:

Do not place food too close to the vents at the

rear of the refrigerator as it can obstruct free air

circulation in the refrigerator compartment.

Wrap food up properly or place it in airtight

containers before putting it into the refrigerator.

Do not place glass bottles or carbonated

beverages into the freezer.

They can freeze and break.

Broken beverage containers can cause injury.

Please observe maximum storage times and

expiration dates of frozen goods.

There is no need to disconnect the refrigerator

from the power supply if you will be away for

less than three weeks.

However, if you will be away for more than

three weeks, remove all the food and the ice

in the ice bucket, unplug the refrigerator, close

the water valve, wipe excess moisture from

the inside walls, and leave the doors open to

prevent odors and mold.

• Fillthe water tank and ice cube trays with

potable water only (tap water, mineral water, or

purified water).

Do not fill the tank with tea or a Sports drink.

This may damage the refrigerator.

• Do not strike or apply excessive force to any

glass surface.

Broken glass may result in a personal injury

and/or property damage.

• If the product is flooded, make sure to

contact your nearest service center.

There is a risk of electric shock or fire.

Engl sh - 6

,,_ CAUTION

CLEANING CAUTIONS

Q

o

+ Do not spray water directly on the

inside or outside the refrigerator

There is a risk of fire or electric shock.

Do not use a hair dryer to dry the inside of the

refrigerator

Do not place a lighted candle in the refrigerator

to remove bad odors.

This may result in an electric shock or fire.

+ Use a clean, dry cloth to remove any

foreign matter or dust from the power

plug blades.

Do not use a wet or damp cloth when

cleaning the plug.

Otherwise, there is a risk of fire or electric

shock.

+ Before cleaning or performing

maintenance, unplug the appliance

from the wall socket.

Failing to do so may result in an electric shock

or fire.

WARNING

+ This product contains chemicals known to

the State of California to cause cancer and

reproductive toxicity.

/.'XWARNING

CRITICAL DISPOSAL WARNINGS

+ DANGER : Risk of child entrapment.

Before you throw away your old

refrigerator or freezer:

Take off the doors and door latch.

Leave the shelves in place so that children

cannot easily climb inside.

Children trapped inside a refrigerator can hurt

themselves or suffocate to death.

+ Please dispose of the packaging material from

this product in an environmentally friendly

manner

+ Ensure that none of the pipes on the back of

the refrigerator are damaged prior to disposal.

+ R-600a or R-134a is used as a refrigerant.

Check the compressor label on the rear of

the appliance or the rating label inside the

fridge to see which refrigerant is used for your

refrigerator.

Ifthis product contains flammable gas

(Refrigerant R-600a), contact your local

authority in regard to safe disposal of this

product.

+ When disposing of this refrigerator, remove the

door/door seals and door latch so that small

children or animals cannot become trapped

inside.

Children should be supervised to ensure that

they do not play with the appliance.

Iftrapped inside, the child may get hurt or

suffocate to death.

+ Cyclopentane is used in the insulation.

The gases in the insulation material require a

special disposal procedure.

Please contact your local authorities in regard

to the environmentally safe disposal of this

product.

+ Keep all packaging materials well out of the

reach of children, as packaging materials can

be dangerous to children.

If a child places a bag over his or her head, the

child could suffocate.

Engl sh +7

ADDITIONAL TIPS FOR

PROPER USAGE

• Inthe event of a power failure, call the local

office of your Electricity Company and ask how

long it is going to last.

Most power failures that are corrected in an

hour or two will not affect your refrigerator

temperatures. However, you should minimize

the number of door openings while the power

is off.

Should the power failure last more than

24 hours, remove and discard all frozen food.

• The refrigerator might not operate consistently

(frozen contents can thaw or temperatures

can become too warm in the frozen food

compartment) when sited for an extended

period of time in a location where ambient

air temperatures are constantly below the

temperatures for which it is designed.

• Refrigeration can have an adverse effect on

certain foods (bananas, for example) and cause

them to deteriorate. Do not refrigerate these

foods.

• Your appliance is frost free, which means there

is no need to manually defrost your appliance.

This will be carried out automatically.

• Temperature rise during defrosting complies

with ISO requirements.

Ifyou want to prevent an undue rise in the

temperature of frozen food while the refrigerator

defrosts, wrap the frozen food in several layers

of newspaper.

• Do not re-freeze frozen foods that have thawed

completely.

Saving Energy Tips

Install the refrigerator in a cool, dry room with

adequate ventilation.

Ensure that it is not exposed to direct sunlight

and never put it near a direct source of heat (a

radiator, for example).

For the highest energy efficiency, do not block

any internal or external grills or vents.

Allow warm food to cool down before placing it

in the refrigerator.

Put frozen food in the refrigerator to thaw.

You can then use the low temperatures of the

frozen products to cool food in the refrigerator.

Do not keep the door of the appliance open for

too long when putting food in or taking food

out.

The shorter the time the door is open, the less

frost build-up you'll have in the freezer.

To reduce power consumption and keep your

energy bills low, we recommend that you

install the refrigerator with at least 2 inches of

clearance on the back and sides.

Engl sh - 8

/©UF

GETTING READY TO INSTALL

THE REFRIGERATOR

Congratulations on the purchase of your Samsung

Side-By-Side Refrigerator. We hope you will enjoy

the many state-of-the-art features and efficiencies

that this new appliance has to offer.

Selecting the best location for the

refrigerator

• Select a location with easy access to a water

supply.

• Select a location without direct exposure to

sunlight.

• Select a location with level (or nearly level)

flooring.

• Select a location with enough space for the

refrigerator doors to open easily.

• Select a location that allows sufficient space to

the right, left, back, and top for air circulation.

• Select a location that allows you to move the

refrigerator easily if it needs maintenance or

service.

• Do not install the refrigerator in locations where

the temperature is over 110 °F (43 °C) or below

50 °F (10 °C).

sdo by sdo

Dj

Depth "A" 36 1/8" (916 mm)

Width "B" 35 7/8" (912 mm)

Height "C" 69 1/4" (1760 mm)

Overall Height "D" 69 6/8" (1774 mm)

2"

'°°:71 I

(949 p_. . \, _mrn)

i485

87 7/8" (1725 mm)

I _ 98 8/4" (908 mrn) _ I

_E 1 1/4"(82 ram)T_lt /_

• Measurements reflect the design

dimensions. The actual dimensions of

your refrigerator may differ slightly.

Engl sh - 9

DA68-03178A-03.indb 9 2015. 1.26. 131311:58

When moving your refrigerator

To prevent floor damage, be sure the front levelling

legs are in the up position (above the floor).

See "Leveling the Refrigerator" on page 14 for

instructions.

Leg Screw Driver

Flooring

For proper installation, you must place this

refrigerator on a level, hard surface that is the

same height as the rest of the floor.

This surface should be strong enough to support a

fully loaded refrigerator.

To protect the finish of the flooring, cut a large

section of the cardboard carton and place it under

the refrigerator where you are working.

When moving the refrigerator, you need to pull and

push it straight forwards or back.

Do not wiggle it from side to side.

Required Tools (Not provided)

Philips Flat-bladescrew Socketwrench

screwdriver(+) driver(-) (13/32")(10 mm)

Allenwrench

(3/16") (5 mm)

REMOVING THE REFRIGERATOR

DOORS

Ifyour entrance won't allow the refrigerator to pass

easily through it, you can remove the doors.

To remove the doors, follow the steps starting

below.

Ifyou do not need to remove the doors, go to

"Leveling the Refrigerator" on page 14.

1. SEPARATE THE WATER SUPPLY LINES

FROM THE FRIDGE

1. Pull the two water lines (which are in the Fixer)

out to the front.

Engl sh - 10

2.Removethetwowaterlines(Whiteforwater

andtheotherforice)bypressingthecoupler

(1)andpullingthewaterline(2)away.

J. if .............................

Ma,..... t,ee _,,,_i!iii!!iiH !_

CAU_TION of the water line °l°r

match.

/K CAUTION

When reconnecting the supply hoses, make sure

you connect hoses of the same color together.

2. DISASSEMBLE THE FREEZER DOOR

1. Remove the cover screw using a Phillips

screwdriver ( 1 ). Then push the hooks on the

sides using a flathead screwdriver to loosen the

cover ( 2 ). Open the freezer door and lift up the

back part of the cover ( 3 ) and then pull the

cover up and towards you to detach it ( 4 ).

Detach the hinge cover with the door open and

then close the door once the hinge cover has

been detached.

2. Remove the hinge cover and then disconnect

the electrical wire connector.

Flip the clamp ( A ) up in direction 1 and then

pull it off indirection 2.

4. Remove the hinge ( B ).

5. Lift up the door and detach itfrom the

refrigerator.

CAUTION

o

Be careful not to damage the electrical wires

when assembling or disassembling the doors.

Make sure the doors do not fall over and

become damaged while they are detached

from the refrigerator.

Engl sh - 11

3. DISASSEMBLE THE SHOW CASE

DOOR OF THE FRIDGE

1. Remove the screw on the upper hinge cover

(1).

With the door open, disengage the two locking

tabs with a flat-head screw driver ( 2 ) and

remove it while the lifting up the rear of the

cover ( 3 ).

2. Disassemble the housing connector.

3. Remove the three fastening screws on the top

hinge of the show case.

4. Remove the show case

door.

4. DISASSEMBLE THE FRIDGE DOOR

1. Push the fixer hinge up, and pull it forward to

remove it.

2. Remove the top hinge from the front of the

door.

3. Remove the entire door.

Engl sh - 12

REASSEMBLING THE DOORS

To reassemble the doors, follow the steps below.

1. REASSEMBLING THE FREEZER DOOR

/K CAUTION

• Be sure to reassemble the Freezer Door before

reassembling the Fridge Door.

• Before reassembling, make sure that all the wire

connectors at the bottom of the Freezer Door

are connected.

How to Reassemble the Freezer Door

1. Attach the doors to the hinges at the bottom of

the refrigerator.

2. Insert the hinge ( B ) into the hinge slot on the

refrigerator, and then press down over the

hinge hole on the door.

3. Insert the clamp ( A ) in the direction of arrow

( 1 ) and then lower it in the direction of arrow

( 2 ) to lock it in place.

4. Hook up the electrical wire connector.

Insert the front part of the cover first, push

down on the back part of the cover, and then

secure the cover in place using a Phillips

screwdriver.

,_ CAUTION

The display may not function properly if you

neglect to connect the electrical wires while

assembling the door.

Engl sh - 13

2. REASSEMBLING THE FRIDGE DOOR

AND THE SHOW CASE DOOR OF THE

FRIDGE

To reassemble the FRIDGE DOOR and the SHOW

CASE DOOR OF FRIDGE, assemble the parts in

reverse order.

3. REASSEMBLING THE WATER SUPPLY

LINES

1. Both water lines must be fully Inserted to the

center of the transparent coupler to prevent

water leakage from the dispenser.

2. Insert the clips in the install pack and check

that each clip holds each line firmly.

Center of Transparent coupler

_1 lip A (1/4")

(6.35 ram)

/!k CAUTION

• Keep the clips out of the reach of children and

make sure that children do not play with them

or put them into their mouths.

• When reconnecting the supply hoses, make

sure you connect hoses of the same color

together.

LEVELING THE REFRIGERATOR

AND ADJUSTING THE HEIGHT

AND GAP OF THE DOORS

How to level the refrigerator

Ifthe front of the appliance is slightly higher than

the rear, the door can be opened and closed more

easily.

Setting up the refrigerator on an uneven surface

will cause the refrigerator to lean.

If the freezer side is lower:

Insert a flathead screwdriver into the height

leveler located at the bottom back of the freezer

door and turn it in the direction of the arrow

until it is level.

If the refrigerator side is lower:

Insert a flathead screwdriver into the height

leveler located at the bottom back of the

refrigerator door and turn in the direction of the

arrow until it is level.

Engl sh - 14

• Raisethefrontoftherefrigeratorsothat

thedoorsclosebythemselves.

Adjustingthelevelerssothattheback

oftherefrigeratorismuchhigherthan

thefrontoftherefrigeratorcanmakeit

difficulttoopenthedoors.

• Ifthebackoftherefrigeratorisnotlevel,putan

appropriatelysizedthinpieceofwoodortile

wheretherefrigeratorlegyouwanttoraisewill

beset,andthensecureitinplaceusingtape.

Slidetherefrigeratorintoitsspot,withtheback

legyouwanttoraiseonthetileorwood.

Then,adjustthelevelofthefrontlegs.

• Whenpushingtherefrigeratorin,becarefulnot

todamagethefloor.

HOW TO ADJUST THE DOOR

HEIGHT

If one door is lower than the other:

• The refrigerator door height can be adjusted

using the adjustment nuts located at the

bottom of each door.

• Raising the door too high can cause the door to

interfere with the hinge cover when it is opened

or closed.

1. Open the door that needs to be adjusted and

loosen the clamping nut ( A ) at the bottom of

the door by turning it clockwise (_ ) using

the spanner included in the product package.

(Raise the lower of the two doors first.)

2. Adjust the height of the door by turning the

adjustment nut ( B ) with a spanner.

(Turn it counterclockwise ( _ ) to increase

the height of the door and clockwise ( _ ) to

decrease it.)

Open the door and adjust it from the inside.

3. Once the doors are level, turn the clamping nut

( A ) counterclockwise ( _ ) to tighten it.

®

Adjusting the level when the refrigerator

is empty can result in the refrigerator

becoming uneven again once items have

been placed inside.

Ifthis occurs, adjust the level again.

iiiiiiiiiiiiiiii

Engl sh - 15

HOW TO ADJUST THE GAP

BETWEEN THE DOORS

If the gap between the refrigerator door and the

freezer door is uneven:

• Use the gap adjustor located at the top of the

refrigerator door (right side).

• Excessive force can cause the adjustor bolt to

break.

1. Remove the refrigerator

door's hinge cover.

Detach the hinge cover with

the door open and then close

the door once the hinge

cover has been detached.

2. Adjust the gap using a 4 mm Allen wrench (not

included).

Rotate the bolt clockwise (_ ) to widen

the gap. Rotate it counterclockwise (_ ) to

narrow the gap.

Adjust until the gap between the refrigerator

door and the freezer door appears even.

/

//

,_ CAUTION

When arranging the cables, take caution not to

tear or peel off the cable coating.

HOW TO ADJUST THE GAP

BETWEEN THE REFRIGERATOR

DOOR AND THE REFRIGERATOR

BODY

Ifthe gap between the refrigerator door and the

refrigerator is uneven :

• Use the adjustors located at the top edge of

the refrigerator, inside each door.

1. Open the door where the gap with the

refrigerator is narrower and then turn the

adjustor counterclockwise (_ ) until the gap

is even.

2. Once the gap between the door and the

refrigerator has been adjusted, turn the adjustor

nut clockwise ( _ ) to lock the adjustor in

place.

Engl sh - 16

iNSTALLiNG THE WATER

DISPENSER LiNE

A water dispenser is one of the helpful features on

your new Samsung Refrigerator.

To help promote better health, the Samsung water

filter removes unwanted particles from your water.

However, itdoes not sterilize or destroy

microorganisms.

You may need to purchase a water purifying

system to do that.

The water line also connects to the ice maker.

For the ice maker to operate properly, water

pressure of 20 - 125 psi (138 - 862 kPa) is

required.

If the refrigerator is installed in an area with low

water pressure (below 20 psi), you can install a

booster pump to compensate for the low pressure.

After you have connected the water line, make

sure the water storage tank inside the refrigerator

is properly filled.

To do this, press the water dispenser lever until

water runs from the water dispenser.

®

Water line installation kits are available at

extra cost from your dealer.

We recommend using a water supply kit

that contains copper tubing.

The Samsung refrigerator warranty does

not cover water line installation.

We strongly recommend you have a

plumber or authorized installer install the

water line.

Connecting to the water supply line

1. First, shut off the main water supply line and

make sure the ice maker is turned off.

The refrigerator should NOT be plugged in

at this point.

2. Locate the nearest cold water drinking water

line.

3. Install the pipe clamp and shut off valve.

4. Connect the water line installation kit to the

shut off valve.

Water line installation kit

Engl sh - 17

Connecting the water supply line to the

refrigerator

There are several items that you need to purchase

to complete this connection.

You may find these items sold as a kit at your local

hardware store.

Use Copper Tubing Use Plastic Tubing

® ¼" copper tubing ® ¼" plastic tubing

® ¼" compression nut _ Molded end (Bulb)

(1pc) ® ¼" compression nut

® Ferrule (2pc) (1pc)

Refric erator

Compression Nut

(1/4") (Assembled) "_

t

Ferrule

(Not supplied) ,_._

Plastic Tubing

(Supplied)

J Compression

Fitting (Assembled)

Bulb

Compression

nut (B) (1/4")

(Not supplied)

Copper tubing or Plastic tubing (C)

(Not supplied) (Not supplied)

Connect the household water line to the

assembled compression fitting.

Ifyou are using copper tubing, slip the

compression nut ( B ) (not supplied) and

ferrule (not supplied) on the copper tubing (not

supplied) as shown.

Ifyou are using plastic tubing ( C ), insert the

molded end (Bulb) of the plastic tubing (C ) into

the compression fitting.

Z_ CAUTION

Do not use plastic tubing ( C ) without the molded

end (Bulb).

2. Tighten the compression nut ( B ) onto the

compression fitting.

Do not over-tighten the compression nut ( B ).

3. Turn the water on and check for any leaks

inside the refrigerator, around the water filter,

and in any connection areas.

Ifyou find water drops or leaks, turn off the

main water supply.

Ifthe leaks are in the connection areas, check

the connections and, if necessary, tighten.

Ifthere are leaks in the refrigerator, check

the water filter and confirm it is in the locked

position.

Turn on the water supply and check for leaks

again.

4. Plug in the refrigerator.

5. Flush 3 gallons of water through the filter before

drinking or using the water from the refrigerator.

(Flush approximately 6 minutes.)

This will clean the water supply system and

remove air from the lines.

To flush, press the Water button, and then press

a large glass or cup against the water dispenser

lever. Fill the glass, empty it into the kitchen sink

after it is filled, and then repeat.

[_ dditional flushing may be required in

some households.

6. Open the refrigerator door and make sure there

are no water leaks coming from the water filter.

[_ + After you turn on the refrigerator, let the

ice maker make ice for 1 to 2 days.

Over that period of time, throw out the

first 1 or 2 buckets of ice the ice maker

makes to ensure all impurities have been

removed from the water line.

+ Only connect the water line to a drinkable water

source.

+ Ifyou have to repair or disassemble the water

line, cut off 1/4" of the plastic tubing to make

sure you get a snug, leak-free connection.

+ You can test the water line quickly using a

paper cup.

Under normal conditions, the water dispenser

can fill a 5.75 oz. (170 cc) cup in about 10

seconds.

Eng+sh - 18

COMPLETING THE SET UP

Now that you have your new refrigerator installed

in place, you are ready to set up and enjoy the

features and functions of the appliance.

By completing the following steps, your refrigerator

should be fully operational.

1. Make sure your refrigerator is in an appropriate

location with reasonable clearance between it

and the wall. Refer to installation instructions in

this manual.

2. Once the refrigerator is plugged in, make sure

the interior light turns on when you open the

doors.

3. Set the Temperature control to the coldest

temperature and wait for an hour.

The freezer will get slightly chilled and the motor

will run smoothly.

Reset the refrigerator and freezer to the

temperatures you want.

4. After you plug the refrigerator in, it will

take a few hours to reach the appropriate

temperature.

You can store food and drinks in the refrigerator

after the temperature is sufficiently cool.

5. Once installation is complete, press the

dispenser lever to check if the water or the ice

is properly dispensed.

6. Make sure the front side of the refrigerator is

0.6 degree higher than its rear side.

If condensation or water drops appear on

dispenser surrounding ( a ) and partition

between freezer and refrigerator ( b ), turn

the Energy Saver mode off after removing

the condensation.

(See the explanation of the Energy Saver

button in "Using the Control Panel" on

page 20.)

I

(b)

Engl sh - 19

ratng the

by-side refriaer tor

J ',._./

side-

USING THE CONTROL PANEL

(s)......... (] __ ............. (9)

®

The Freezer button serves two purposes:

To set the Freezer to your desired

temperature.

To turn the Power Freeze function on

and off.

1.

To set the Freezer temperature, touch

the Freezer button.

You can set the temperature between

5 °F (-15 °O) and -8 °F (-23 °O).

2. Power Freeze function

Touch and hold this button for 3 seconds

to decrease the time needed to freeze

9roducts in the Freezer.

It can be helpful if you need to quickly

freeze easily spoiled items or if the

temperature in the freezer has warmed

dramatically.

(For example, if the door was left open.)

When you use this function, the energy

consumption of the refrigerator will

increase.

Remember to turn itoff when you don't

need it and return the freezer to your

original temperature setting.

If you need to freeze a large amount of

food, activate the Power Freeze function at

least 20 hours before you put the food into

the freezer.

To cancel the Power Freeze function, press

and hold the Freezer/Power Freeze (3 sec)

button again for 3 seconds.

...6..

Engl sh- 20

The Lighting button serves two purposes:

To turn the dispenser light on and off

To reset the water filter life indicator.

1. Light Function

Touching the Lighting button turns on

the Dispenser LED lamp in continuous

mode so that it stays on continuously.

The button also lights up. Ifyou want the

Dispenser lamp to come on only when

some one uses the dispenser, press the

Lighting button to turn the continuous

mode off.

2. Filter Reset (3sec) Function

After you replace the water filter, touch and

hold this button for 3 seconds to reset the

water filter life indicator.

When you reset the water filter life

indicator, the Filter icon on the panel turns

Off.

The Filter icon turns red to let you know it

is time to change the filter.

See page 23 for more information.

La page est en cours de chargement...

Samsung RH30H9500SR/AA-00 Le manuel du propriétaire

Ce manuel convient également à

Samsung RH30H9500SR/AA-00 Le manuel du propriétaire

dans d''autres langues

Documents connexes