Panasonic Laptop CF-73 Manuel utilisateur

Marque: Panasonic

Modèle: Laptop CF-73

Taper: Manuel utilisateur

Ce manuel convient également à

CF-73

OPERATING INSTRUCTIONS

Personal Computer

Appendix

LIMITED USE LICENSE AGREEMENT ......... 32

Hard Disk Backup Function ............................34

Hard Disk Data Erase Utility ........................... 38

Specifications ................................................. 39

LIMITED WARRANTY .................................... 41

Troubleshooting

List of Error Codes ......................................... 24

Dealing with Problems (Summary)....................... 25

Reinstalling Software .................................... 30

Operation

Starting Up/Shutting Down ............................ 15

Touch Pad ..................................................... 18

Reference Manual ......................................... 19

Useful Information ......................................... 20

Getting Started

Read Me First.................................................. 3

Names and Functions of Parts ........................ 9

First-time Operation ...................................... 11

Contents

[Additional Manual]

Reference Manual

This manual can be accessed on your computer. Refer

to page 19 on how to access the Reference Manual.

Reference Manual

• Touch Pad

• Touchscreen*

• Standby/Hibernation

Functions

• Security Measures

• Computing on the Road

• Battery Power

• Multimedia Pocket

• DVD-ROM & CD-R/RW Drive

• WinDVD

• B’s Recorder/B’s CLiP

• PC Cards

• SD Memory Card/

MultiMedia Card

• SD Memory Card Security

Function

• RAM Module

• Port Replicator / I/O Box

• External Display

• Printer

• USB Devices

• Modem

• LAN

• Wireless LAN

• Hard Disk Drive

• Setup Utility

• Icon Enlarger

* Only for models with touch-

screen

Reference Manual

• Technical Information

• DMI Viewer

• List of Error Codes

• Dealing with Problems

(Advanced)

Model No. CF-73 Series

Please read these instructions carefully before using this product and save this manual for future use.

Getting Started

Appendix

Operation

Troubleshooting

• Read Me First

• Key Combinations

• LED Indicators

Getting Started

Introduction

Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new

computer.

Illustrations and Terminology in this Manual

reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.

No patent liability is assumed with respect to the use of the information contained herein.

Disclaimer

Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no

liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.

Trademarks

Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other

countries.

Intel, Pentium and PROSet are either registered trademarks or trademarks of Intel Corporation.

Adobe

and Acrobat

are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or

other countries.

Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner

companies.

NOTE: NOTE provides a useful fact or helpful information.

CAUTION: CAUTION indicates a condition that may result in minor or moderate injury.

Enter : This illustration means to press the [Enter] key.

Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.

[start] - [Run]: This illustration means to click [start], then to click [Run]. For some applications, you may need to

double-click.

: Where to go for referred information.

: This illustration means to refer to the Reference Manual, which is available on your computer.

Refer to page 19 on how to access this manual.

Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation

easier to understand.

In this manual, “Microsoft

Windows

XP Professional” is indicated as “Windows” or “Windows XP”.

If the user has logged on without the administrator authority, some functions may not be executable, and some screens may

not be displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions.

This manual covers two types of models, as distinguished by the type of LCD screen (models with touchscreen and models

without touchscreen).

Confirm the latest information on optional products in catalogs, etc.

In this manual, “B’s Recorder GOLD5” is indicated as “B’s Recorder”.

Circular media such as DVD-ROM and CD-ROM are described as “discs”.

The “CD/DVD drive” is a description about the following drives.

DVD-ROM & CD-R/RW drive, DVD MULTI drive

Customer’s Record

Serial No.

Date of Purchase

Model No. *

Code No.

Dealer’s Name

Dealer’s Address

* For the Model No., insert the 12 digit number (for example, CF-73NCQTSKM) located on

the bottom of the computer.

Getting Started

Read Me First

Federal Communications Commission Radio

Frequency Interference Statement

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the Panasonic Service Center or an experienced ra-

dio/TV technician for help.

Warning

To assure continued compliance, use only shielded interface

cables when connecting to a computer or peripheral. Also,

any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s author-

ity to operate this equipment.

FCC RF Exposure Warning:

This equipment complies with FCC radiation exposure lim-

its set forth for an uncontrolled environment.

This equipment has been approved for portable operation,

and unless otherwise advised in separate supplemental in-

structions for individual wireless transmitter(s), requires

minimum 1.5 cm spacing be provided between antenna(s)

and all person’s body (excluding extremities of hands, wrist

and feet) during wireless modes of operation.

This equipment may use multiple installed transmitters,

which may be capable of simultaneous transmission.

This equipment is provided with PC Card slot that could be

used with wireless transmitters, which will be specifically

recommended when they become available.

Other third-party wireless transmitters have not been RF ex-

posure evaluated for use with this computer and may not

comply with FCC RF exposure requirements.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Responsible Party: Matsushita Electric Corporation of America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP-5 (1-800-527-8675)

For U.S.A.

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

Manufacturer of modem: PC TEL Inc.

Model No. PCT2304WT

FOR HOME OR OFFICE USE

Tested To Comply

With FCC Standards

1. This equipment complies with CFR47 Part 68 rules. On the

computer is a label that contains, among other information,

the FCC registration number and ringer equivalence number

(REN) for this equipment. If required, this information must

be provided to the telephone company.

2. An FCC compliant telephone cord and modular plug is pro-

vided with this equipment. This equipment is designed to be

connected to the telephone network or premises wiring us-

ing a compatible modular jack which is Part 68 compliant.

See Installation Instructions for details.

3. The REN is used to determine the quantity of devices which

may be connected to the telephone line. Excessive RENs on the

telephone line may result in the devices not ringing in response

to an incoming call. In most, but not all area, the sum of RENs

should not exceed five (5.0). To be certain of the number of

devices that may be connected to a line, as determined by the

total RENs, contact the local telephone company.

4. If your telephone equipment cause harm to the telephone

network, the telephone company will notify you in advice

that temporary discontinuance of service may be required.

But if advice notice isn’t practical, the telephone company

will notify the customer as soon as possible. Also, you will

be advised of your right to file a complaint with the FCC if

you believe it is necessary.

5. The telephone company may take changes in it’s facilities,

equipment, operations or procedures that could affect the op-

eration of the equipment. If this happens the telephone com-

pany will provide advance notice in order for you to make

necessary modifications to maintain uninterrupted service.

6. If trouble is experienced with this equipment, for repair or

warranty information, please contact Matsushita Electric

Corporation of America at DIAL TOLL FREE 1-800-LAP-

TOP5 (1-800-527-8675). If the equipment is causing harm to

the telephone network, the telephone company may request

that you disconnect the equipment until the problem is resolved.

7. There are no user serviceable parts contained in this equip-

ment.

8. This equipment may not be used on coin service provided

by the telephone company. Connection to party lines is sub-

ject to state tariffs.

9. The Telephone Consumer Protection Act of 1991 makes it

unlawful for any person to use a computer or other electronic

device to send any message via a telephone fax machine un-

less such message clearly contains in a margin at the top or

bottom of each transmitted page or on the first page of the

transmission, the date and time it is sent and an identification

of the business or other entry, or other individual sending the

message and the telephone number of the sending machine or

such business, other entity, or individual. In order to program

this information into your fax software, you should refer to

the manual of the Fax software being used.

Getting Started

Read Me First

For Canada

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved modem unit.

The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified

equipment. This certification means that the equipment meets

telecommunications network protective, operational and

safety requirements as prescribed in the appropriate Terminal

Equipment Technical Requirements document(s). The

Department does not guarantee the equipment will operate

to the user’s satisfaction.

Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local

telecommunications company. The equipment must also be

installed using an acceptable method of connection. The customer

should be aware that compliance with the above conditions may

not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a

representative designated by the supplier. Any repairs or

alterations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company

cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical

ground connections of the power utility, telephone lines and

internal metallic water pipe system, if present, are connected

together. This precaution may be particularly important in rural

areas. Caution: Users should not attempt to make such

connections themselves, but should contact the appropriate

electric inspection authority, or electrician, as appropriate.”

“NOTICE: The Ringer Equivalence Number (REN) assigned

to each terminal device provides an indication of the

maximum number of terminals allowed to be connected to a

telephone interface. The termination on an interface may

consist of any combination of devices subject only to the

requirement that the sum of the Ringer Equivalence Numbers

of all the devices does not exceed 5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT

DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identifie le matériel

homologué. Cette étiquette certifie que le matériel est

conforme aux normes de protection, d’exploitation et de

sécurité des réseaux de télécommunications, comme le

prescrivent les documents concernant les exigences

techniques relatives au matériel terminal. Le Ministère

n’assure toutefois pas que le matériel fonctionnera à la

satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il

est permis de le raccorder aux installations de l’entreprise

locale de télécommunication. Le matériel doit également être

installé en suivant une méthode acceptée de raccordement.

L’abonné ne doit pas oublier qu’il est possible que la

conformité aux conditions énoncées ci-dessus n’empêche

pas la dégradation du service dans certaines situations.

Les réparations de matériel homologué doivent être

coordonnées par un représentant désigné par le fournisseur.

L’entreprise de télécommunications peut demander à

l’utilisateur de débrancher un appareil à la suite de

réparations ou de modifications effectuées par l’utilisateur

ou à cause de mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que tous

les fils de mise à la terre de la source d’énergie électrique,

des lignes téléphoniques et des canalisations d’eau

métalliques, s’il y en a, sont raccordés ensemble. Cette

précaution est particulièrement importante dans les régions

rurales. Avertissement: L’utilisateur ne doit pas tenter de faire

ces raccordements lui-même; il doit avoir recours à un service

d’inspection des installations électriques, ou à un électricien,

selon le cas.”

“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné

à chaque dispositif terminal indique le nombre maximal de

terminaux qui peuvent être raccordés à une interface. La

terminaison d’une interface téléphonique peut consister en

une combinaison de quelques dispositifs, à la seule condition

que la somme d’indices d’équivalence de la sonnerie de touts

les dispositifs n’excède pas 5.”

IES: Voir sous le fond de l’ordinateur

10.According to the FCC’s electrical safety advisory, we recom-

mend that you may install an AC surge arrestor in the AC

outlet to which this equipment is connected. Telephone com-

panies report that electrical surges, typically lightning tran-

sients, are very destructive to customer terminal equipment

connected to AC power sources and that this is a major na-

tionwide problem.

“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom-

munication line cord.”

“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des

conducteurs de télécommunications 26 AWG ou de section supérieure.”

Notice for the products using LCD

This product uses one or more fluorescent lamps containing a

small amount of mercury. It also contains lead in some compo-

nents. Disposal of these materials may be regulated in your com-

munity due to environmental considerations. For disposal or

recycling information please contact your local authorities, or

the Electronics Industries Alliance: <http://www.eiae.org/>

Industry Canada

This product complies with RSS210 Industry Canada.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Getting Started

Declaration of Conformity (DoC)

“Hereby, we and Panasonic Service Europe GmbH (PSE), declares that this Personal Computer is in compliance

with the essential requirements and other relevant provisions of the Directive 1999/5/EC.”

Hint:

If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to our

web address: http://doc.panasonic-tc.de

Network connection.

The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area;

- Public Switched Telephony Networks

Technical Features.

The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbits/s

- Maximum bitrate sending mode: 33.6 kbits/s

This product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Netherlands, Swe-

den, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway

and Austria.

--------------------------------------------------------------------------------------------------------------------------------------------

Compliance Notice - CE Mark

This equipment is in conformance with the requirements of the European Council Directive listed below:

73/23/EEC Low Voltage Directive with amendment 93/68/EEC

89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC

1999/5/EC

--------------------------------------------------------------------------------------------------------------------------------------------

For Europe

Getting Started

Lithium Battery

Lithium Battery!

This computer contains a lithium battery to enable the date,

time, and other data to be stored. The battery should only be

exchanged by authorized service personnel.

Warning! A risk of explosion from incorrect installation or mis-

application may possibly occur.

Important Safety Instructions / Importantes Mesures De Sécurité

When using your telephone equipment, basic safety precau-

tions should always be followed to reduce the risk of fire,

electric shock and injury to persons, including the following:

1.Do not use this product near water, for example, near a

bath tub, wash bowl, kitchen sink or laundry tub, in a wet

basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) dur-

ing an electrical storm. There may be a remote risk of

electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicin-

ity of the leak.

4.Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a fire. They may

explode. Check with local codes for possible special dis-

posal instructions.

SAVE THESE INSTRUCTIONS

Certaines mesures de sécurité doivent être prises pendant

l’utilisation de matérial téléphonique afin de réduire les

risques d’incendie, de choc électrique et de blessures. En

voici quelquesunes:

1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une

baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à

laver, dans un sous-sol humide ou près d’une piscine.

2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil

sans fil) pendant un orage électrique. Ceci peut présenter

un risque de choc électrique causé par la foudre.

3.Ne pas utiliser l’appareil téléphonique pour signaler une

fuite de gaz s’il est situé près de la fuite.

4.Utiliser seulement le cordon d’alimentation et le type de

piles indiqués dans ce manual. Ne pas jeter les piles dans

le feu: elles peuvent exploser. Se conformer aux règlements

pertinents quant à l’élimination des piles.

CONSERVER CES INSTRUCTIONS

Information to the User

This product and your Health

This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product

however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.

Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this

product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result

from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible

representatives of the organization. These situations may for example include:

Using this product on board of airplanes, or

In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports),

you are encouraged to ask for authorization to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction

of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or

distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these

guidelines.

Read Me First

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui permet

de sauvegarder certaines données, notamment la date et l’fheure.

La pile ne doit être remplacée que par un technicien qualifié.

Danger ! Risque d’fexplosion en cas de non respect de cette

mise en garde!

Getting Started

Keep SD memory cards and MultiMedia Cards

(both sold separately) away from infants and

small children.

Accidental swallowing will result in bodily injury.

In the event of accidental swallowing, see a doctor

immediately.

CD Drive Caution

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER.

L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU

L’EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES

SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION À

DES RADIATIONS DANGEREUSES.

NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER

SOI-MÊME.

CONFIER TOUT TRAVAIL D'ENTRETIEN À UN PERSONNEL

QUALIFIÉ.

Bottom

CLASS 1 LASER PRODUCT

LASER KLASSE1

Laser safety information is appropriate only when drive with laser is

installed.

Les mesures de sécurité relatives au laser ne s’appliquent que lors de

l’installation d’une unité avec laser.

Precautions

Avoid Extreme Heat and Cold

Do not store or use the computer in locations

exposed to heat, direct sunlight, or extreme cold.

Avoid moving the computer between locations with

large temperature difference.

Operation: 5

C to 35

C {41

F to 95

Storage: -20

C to 60

C {-4

F to 140

Avoid Direct Sunlight on the LCD Panel

The LCD panel should not be exposed to direct

sunlight or ultraviolet light.

Avoid Humidity, Liquids and Dust

Do not store or use the computer in locations exposed

to high humidity, liquids (including rain) or dust.

Usage

This computer has been designed so as to minimize shock to the LCD and hard disk drive, the leakage of liquid (e.g., water) on to the

keyboard, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling.

Before putting the computer away, be sure to wipe off any moisture.

Prevent Shock

Avoid subjecting the computer to severe vibrations or

impact. Do not place the computer inside a car trunk.

Avoid Radio Frequency Interference

Do not place the computer near a television or ra-

dio receiver.

Avoiding low-temperature burns

Avoid more than casual contact with any heat pro-

ducing area of the notebook computer, AC adap-

tor, and any option or accessory you use with it.

Even low heat, if warmer than body temperature,

can cause a burn, if the skin is exposed to the heat

source for a long enough period of time.

Handling

Avoid Magnetic Fields

Keep the computer away from magnets.

Data stored on the hard disk may be lost.

Avoid Stacking

Do not place heavy objects on top of the computer.

Keep Small Objects Away

Do not insert paper clips or other small objects into

the computer.

Do Not Disassemble the Computer

Do not attempt to disassemble your computer.

Avoid Excessive Force on the Display

Do not apply excessive downward force on the

display when it is completely opened, especially

when plugs and/or cables are connected to the rear

of the computer.

Do not touch the computer and cable when it

starts thundering.

Getting Started

Precautions (Battery Pack)

NOTE

The battery pack may become warm during recharging

or normal use. This is completely normal.

Recharging will not commence outside of the allowable

temperature range (0 °C to 50 °C {32 °F to 131 °F}).

( “Battery Power”) Once the allowable range

requirement is satisfied, charging begins automatically.

Note that the recharging time varies based on the usage

conditions. (Recharging takes longer than usual when

the temperature is 10 °C {50 °F} or less.)

If the temperature is low, the operating time is short-

ened. Only use the computer within the allowable tem-

perature range.

This computer has a high temperature mode function

that prevents the degradation of the battery in high tem-

perature environments. ( “Battery Power”) A

level corresponding to a 100% charge for high tempera-

ture mode is approximately equivalent to an 80% charge

level for normal temperature mode.

The battery pack is a consumable item. If the amount of

time the computer can be run off a particular battery pack

becomes dramatically shorter and repeated recharging

does not restore its performance, the battery pack should

be replaced with a new one.

When transporting a spare battery inside a package, brief-

case, etc., it is recommended that it be placed in a plastic

bag so that its contacts are protected.

Always power off the computer when it is not in use.

Leaving the computer on when the AC adaptor is not

connected will exhaust the remaining battery capacity.

Care should be exercised with regard to the following in

order to avoid the possibility of overheating, fire or damage.

Avoid Heat

Do not throw the battery pack into a fire or ex-

pose it to excessive heat.

Keep Articles Away

Do not place the battery pack together with articles

such as necklaces or hairpins when carrying or stor-

ing.

Do Not Disassemble

Do not insert sharp objects into the battery pack,

expose it to bumps or shocks, deform, disassemble,

or modify it.

Do Not Short

Do not short the positive (+) and negative (-) con-

tacts.

Avoid Extreme Heat, Cold and Direct Sunlight

Do not charge, use or leave the battery pack for

extended periods where it will be exposed to di-

rect sunlight, in a hot place (in a car on a sunny

day, for example), or in a cold place.

Do Not Use With Any Other Computer

The battery pack is rechargeable and was intended

for the specified computer. Do not use it with a

computer other than the one for which it was de-

signed.

Do Not Put into a Microwave

Do not put the battery pack into a microwave oven

or a pressurized chamber.

Stop Using

Should the battery emit an abnormal odor, become

hot to the touch, become discolored, change shape,

or become in any way different from normal, re-

move it from the computer and stop using it.

If the battery pack will not be used for a long period of time

(a month or more), charge or discharge (use) the battery pack

until the remaining battery level becomes 30% to 40% and

store it in a cool, dry place.

This computer prevents overcharging of the battery by re-

charging only when the remaining power is less than approx.

95% of capacity.

The battery pack is not charged when the computer is first

purchased. Be sure to charge it before using it for the first

time. When the AC adaptor is connected to the computer,

charging begins automatically.

Should the battery leak and the fluid get into your eyes, do not

rub your eyes. Immediately flush your eyes with clear water

and see a doctor for medical treatment as soon as possible.

Do not touch the terminals on the battery pack. The battery

pack may no longer function properly if the contacts are dirty

or damaged.

Do not expose the battery pack to water, or allow it to be-

come wet.

Read Me First

Getting Started

Power Switch

Battery pack status

( “Battery Power”)

Power status

( “LED Indicators”)

LED Indicators

This hole allows heat to exit.

CAUTION

( “External Display”)

External Display Port

Serial Port

Ventilation Hole

( “PC Cards”)

PC Card Slots

( “USB Devices”)

USB Ports

( page 18)

Touch Pad

For enhanced portability and

in-the-field efficiency.

Carrying Handle

For information on the key combi-

nations available.

( “Key Combinations”)

( “LED Indicators”)

LED Indicators

SD memory card status

Caps Lock

Numeric Key (NumLk)

Scroll Lock (ScrLk)

Multimedia pocket device status

Hard disk drive status

( “Multimedia Pocket” and “DVD-ROM & CD-R/RW Drive”)

Multimedia Pocket (DVD-ROM & CD-R/RW Drive)

Function Keys

Speakers

DC-IN Jack DC IN 15.6 V

( “Wireless LAN”)

Wireless LAN Antenna

Use this port to a serial mouse or serial com-

munication devices.

(Only for models with touchscreen:

“Touchscreen”)

Do not block or place the computer

in a location that may prevent proper

ventilation.

Sound is output from Card Speakers built into

the back panel of the LCD screen.

To adjust the volume:

Fn + F5 / Fn + F6

Speaker on/off : Fn + F4

CAUTION

Do not allow metallic objects or magnetic me-

dia to come near the speakers.

( “SD Memory

Card/MultiMedia Card”)

SD Memory Card Slot

Names and Functions of Parts

Do not allow metallic objects or mag-

netic media to come near these areas.

• If floppy disks, magnetic memory

cards, or other magnetic media ap-

proach these areas, there is a risk that

data will be destroyed.

CAUTION

LCD

Getting Started

Use only a monaural condenser

microphone (miniature jack). Us-

ing an input source other than a

monaural condenser microphone

may not allow audio to be input or

may damage the equipment.

Use this jack to connect head-

phones or amplifier-equipped

speakers. Audio output from the

internal speaker is disabled when

headphones or external speakers

are connected.

( “LAN”)

( “Modem”)

LAN

Modem

Microphone Jack

Headphone Jack

This hole allows heat to exit.

Ventilation Hole

I/O Box Connector

MP Release Button

( “Multimedia Pocket” )

( “RAM Module”)

( “Battery Power”)

Battery Pack

RAM Module Slot

( “Port Replicator/I/O Box”)

Expansion Bus Connector

CAUTION

For connecting printer, external mouse, keyboard,

etc., through the I/O box (optional).

( “Port Replicator/I/O Box”)

A lithium ion battery that is recyclable powers the product you

have purchased. Please call 1-800-8-BATTERY for information

on how to recycle this battery.

L’appareil que vous vous êtes procuré est alimenté par une batterie

au lithium-ion. Pour des renseignements sur le recyclage de la

batterie, veuillez composer le 1-800-8-BATTERY.

Security Lock

LOCK

A Kensington cable can be connected.

For more information, read the

manual that comes with cable.

EXT.

Do not block or place the computer

in a location that may prevent proper

ventilation.

CAUTION

Do not cover the computer with a thick cloth, such as a blanket.

Names and Functions of Parts

Getting Started

Read the steps below to help you learn what parts are included, and to gain an understanding of

some basic computer-related operations.

Confirm the inclusion of all parts.

Make sure the parts shown in the figure have been supplied. If any of these items are

missing or is not working properly, contact Panasonic Technical Support.

Confirm that the latch is properly locked. If it is not, the battery pack may fall

out while you are carrying around the computer.

Do not touch the terminals on the battery pack and the computer. The battery

pack may no longer function properly if the contacts are dirty or damaged. Also,

the computer may not operate properly.

Before using the battery pack, carefully read “Precautions (Battery Pack)”

( page 8).

Read the LIMITED USE LICENSE AGREEMENT. ( page 32)

Be sure to read the LIMITED USE LICENSE AGREEMENT before breaking the seal

on the computer’s packaging.

Turn the computer over and insert the battery pack.

1 Slide the right-side latch to the unlock position ( ).

2 Make sure the battery pack is facing the correct direction, slide it in the direction

of the arrow.

3 Slide the right-side latch to the lock position ( ), and then check to ensure that the

battery pack is held firmly.

(Left latch is locked automatically.)

Model No: CF-AA1653A

AC Adaptor ........... 1

Model No: CF-VZSU26U

AC Cord ................1

Battery Pack........1

Modem Telephone

Cable ..................... 1

Product Recovery DVD-ROM

AC Adaptor ........... 1

AC Cord ................1

Battery Pack........1

Battery Pack

Latch

Operating Instructions (This book)*

... 1 Windows

Book ...................... 1

CAUTION

Soft Cloth ................................... 1

( “Touchscreen”)

Stylus ......................................... 1

If additional instructions are included with the computer, be sure to read them. It may be

necessary to perform additional operations during the following procedures.

First-time Operation

Getting Started

First-time Operation

Connect your computer to a power outlet.

CAUTION

Be sure the AC adaptor is connected until completing the first-time use operation.

When using the computer for the first time, do not connect any peripheral de-

vice except the battery pack and AC adaptor to the computer.

Handling the AC adaptor

Do not twist or pull the AC power cord forcefully. Doing so may damage the

connections.

Use only the specified AC adaptor with your computer. Using an AC adaptor

other than the one supplied might damage the battery and/or the computer.

When the DC plug is not connected to the computer, disconnect the AC cord

from your AC wall outlet.

Problems such as sudden voltage drops may arise during periods of thunder and

lightning. Since this could adversely affect your computer, an uninterruptible

power source (UPS) is highly recommended unless running from the battery

pack alone.

Open the display.

1 Pull the carrying handle forward.

2 Lift up the latch.

3 Lift open the display.

CAUTION

Turn your computer on.

Press the power switch and hold it for approximately one second until the power indi-

cator turns on before releasing it.

Do not press the power switch and hold it for more than four seconds; this will

cause the power to be turned off forcibly.

Do not press the power switch repeatedly.

Once the computer is powered off, you must wait at least ten seconds before

powering it on again.

Setup Windows.

Moving the cursor ( ) or clicking buttons can be performed with the touch pad

( page 18).

The battery pack will be charged automatically.

Charging Time: Approx. 3 hours

(Varies depending on the usage conditions.)

Latch

Power

Switch

Power

Indicator

DC-IN Jack

DC IN 15.6 V

CAUTION

1 At [Welcome to the Windows XP Setup Wizard], select [Next].

2 After reading the agreement, select [I accept this agreement] or [I don’t accept this

agreement], then select [Next].

NOTE

DC Plug

Do not press any key or move the touch pad until [Windows XP Professional

Setup] is displayed.

Do not use the touchscreen during the Windows setup.

If [I don’t accept this agreement] is selected, the Windows setup will be aborted.

Getting Started

CAUTION

Remember this password! If the password is forgotten, Windows cannot

be operated.

3 Select settings for your region, then select [Next].

4 Enter your name and organization and then select [Next].

5 Enter your computer name and administrator password and then select [Next].

6 Enter the correct date, time and time zone, then select [Next].

7 Enter your administrator password and select .

The computer will restart.

NOTE

It may take some time before the computer restarts and the screen of step

7 is displayed. Wait, and do not press any keys, or touch the touch pad, etc.

If the keyboard or the touch pad etc. are operated, a message will appear

indicating that there is no response on the screen, or some screens may

appear white. In such cases, also wait until the next screen is displayed.

Calibrate the touchscreen.

1 Log on to Windows.

2 Select [start] - [Control Panel] - [Other Control Panel Options] - [Touch Panel] -

[Calibration] - [Calibrate Now].

3 Touch the nine “+” marks on the calibration screen with the stylus (included).

4 Select [Update].

5 Select [OK].

When creating a new user account:

• If you make mail settings, create password reset disks ( page 14), or

conduct other related operations before creating the user account, you will

be unable to use any previous mail history or settings.

• When you create the first new account, you can only select [Computer

administrator].

Once a “Computer Administrator” account has been created, you can cre-

ate additional limited user accounts.

Note also that only the added user account will be displayed in the Wel-

come screen. The account for the administrator created during Windows

setup will not be displayed.

NOTE

CAUTION

Remember this password! If the password is forgotten, Windows cannot be

operated. You can create a password reset disk beforehand ( page 14).

Create a new account.

1 Select [start] - [Control Panel] - [User Accounts] - [Create a new account].

2 Enter a name for the new account, then select [Next].

3 Select [Computer administrator], then select [Create Account].

4 <When you want to create a password for the new account>

Select the new account you have created and select [Create a password].

Follow the instructions on the screen to create a password.

5 Select [start] - [Turn Off Computer] - [Restart] to restart the computer.

NOTE

Calibrate the touchscreen for each account created.

Getting Started

Depending on the Windows settings, installed applications, and drivers, menus and

other displays may differ, or some functions (such as use of the password reset disk)

may be inoperable. Check with your system administrator for details.

You can select Classic view for the Control Panel or select the Classic Start menu.

You can also change the way a user logs on or off.

The procedure in this manual uses the method or view of the Windows XP default

setting (not Classic view or Classic Start menu etc.).

Resetting the password

Windows XP has a function to reset a forgotten password.

To use this function, you need to create a password reset disk beforehand following

the steps below.

Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer.

Select [start] - [Control Panel] - [User Accounts].

Select [Prevent a forgotten password] from the [Related Tasks] menu of the ac-

count you have logged on to and create a password reset disk following the on-

screen instructions.

Store the password reset disk in a safe place.

• Only the logon password for each account can be reset.

The password set in the Setup Utility cannot be reset.

Information for Windows XP

NOTE

To improve the security of the computer, be sure to refer to “Security of the Com-

puter” and “Windows Update”. ( page 22)

If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wireless LAN”.

About the Icon Enlarger

• If the characters or icons on the screen are too small and difficult to see, after

completing step

, select [start] - [All Programs] - [Panasonic] - [Icon Enlarger].

This will allow you to magnify the display of characters and icons on the screen.

( “Icon Enlarger”)

• The [Icon Enlarger] can be set separately for each account.

This concludes the first-time use operation guidelines.

Start up Windows

Media Player.

Log on with the administrator authority, and select on the desktop.

After this, start up the application following the instructions on the screen.

During this process, you will be required to agree to the license agreement.

If [I Decline] is selected or a window is closed without any decision being made in

the license agreement, no icons on the desktop may be selected. In this case, restart

the computer.

To have DVD video and MPEG files played back automatically on WinDVD, re-

move the check mark from [DVD Video] and [Movie file (mpeg)] on screen

on the left.

. When starting up Windows

Media Player for the first time, one of the setting

screens will be displayed.

. After starting up Windows

Media Player, the screen will be displayed when [Tools]

- [Options] - [File Types] is selected.

After completing the settings, select on the screen of the Windows

Media Player.

First-time Operation

Operation

Starting Up/Shutting Down

Starting Up

Power Switch

Power

Indicator

Turn your computer on.

Press the power switch and hold it for approximately one second until the power indi-

cator turns on before releasing it.

CAUTION

While booting, avoid the following until the hard disk drive indicator ( ) has

turned off.

• Connecting or disconnecting the AC adaptor.

• Touching the power switch.

• Performing any keyboard, touch pad, touchscreen (only for models with touch-

screen) or external mouse operations.

• Closing the display.

Once the computer is powered off, you must wait at least ten seconds before

powering it on again.

When the CPU temperature rises, the computer may not power on to prevent

the CPU from overheating. Should this happen, allow the computer to cool

down then switch the power on again.

If the computer still does not power on, contact Panasonic Technical Support.

Latch

Open the display.

1 Pull the carrying handle forward.

2 Lift up the latch.

3 Lift open the display.

You may encounter the following situations when the computer is turned on at

very low temperatures. These functions are designed to prevent hard disk drive

malfunctions that may occur at low temperatures.

NOTE

Situation

The computer turns on,

and the message “Warm-

ing up the system (up to

30 minutes)” is displayed.

• The computer does not

turn on.

• The computer does not

resume operation from

standby mode.

(The power indicator

blinks quickly in green.)

Action

The computer is warming up before start up. Wait for

the computer to start up (takes up to 30 minutes).

However, the computer may fail to warm up and the

message “Cannot warm up the system” will be dis-

played, and the computer will not start. If this happens,

turn off the computer, leave it in an environment with

a temperature of 5 °C {41 °F} or more for about an

hour, and then try turning the power on once more.

Leave it in an environment with a temperature of 5

°C {41 °F} or more for about an hour, then try turn-

ing the power on once more.

If the dummy card is inserted, remove it before starting up.

NOTE

Operation

Starting Up/Shutting Down

Log on to Windows.

After confirming that the hard disk drive indicator ( ) has turned off, select the user

and input the password, then select . Until the correct password is entered, the

computer will not operate.

Select your application.

You are able to start working on your computer.

The power saving function is factory set, so if there is no input from a key, the touch

pad, the touchscreen (only for models with touchscreen) or an external mouse (when

one is connected) for a certain interval of time, the power to the LCD and hard disk

may be turned off. The LCD will resume operation when the touch pad, the touch-

screen (only for models with touchscreen) or an external mouse (when one is con-

nected) is used or a key is pressed.

The power to the LCD may be turned off even when an application software is being

installed. In this case, because it is conceivable that a selection dialog box will be

shown, do not press Space or Enter to attempt to resume from this condition

as doing so may trigger a selection, but instead, press a key unrelated to the direct

triggering of a selection, like Ctrl .

In addition, when the computer is left alone, it automatically enters the standby or

hibernation mode ( “Standby/Hibernation Functions”). The computer will

resume by pressing the power switch.

NOTE

If the screen on the left is displayed immediately after you turn

on the power...

A password has been set to ensure the computer’s security.

Enter your password*

and press Enter . ( “Security Measures”)

When the correct password is input, the computer will start.

When three incorrect password attempts or nothing is input for one minute, the com-

puter will power off.

Supervisor Password or User Password set in the Setup Utility (not the Windows password).

Enter Password [ ]

Operation

Shutting Down (power off your computer)

Save important data and close each application.

Select [start] - [Turn Off Computer].

Select [Turn Off].

Your computer will power off automatically.

Restarting your computer (without shutting down)

Select [Restart].

To shut down using the keyboard;

Press , U , and select [Turn Off] with U .

CAUTION

Do not do the following during the shutdown/restart procedure.

• Connecting or disconnecting the AC adaptor.

• Touching the power switch.

• Performing any keyboard, touch pad, touchscreen (only for models with touch-

screen) or external mouse operations.

• Closing the display.

When you leave the computer or interrupt your work...

If you use the “Standby” or “Hibernation” function, you can shut down the computer

without closing programs and documents. Upon restarting your computer from either

the standby or hibernation mode, you can immediately continue working in all pro-

grams, or documents that were open at the time the computer was placed into standby

or hibernation mode. ( “Standby/Hibernation Functions”)

Operation

Touch Pad

Use the touch pad to move the cursor on the display and perform normal computer operations.

Left Button

Work Surface

Refer to [Mouse Properties] for information on basic operations other than the above.

To display [Mouse Properties]:

Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].

Right Button

Handling the Touch Pad

By design the touch pad is to be used with a finger tip only. Do not place any object on the

work surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard ob-

jects that can leave marks (e.g., pencils and ball point pens).

Try to avoid having any harmful substances such as oil, come in contact with the touch pad.

The cursor may not work properly in such cases.

When the touch pad becomes dirty:

Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied with

detergent diluted with water and then thoroughly wrung.

Do not use benzene or thinner, or rubbing alcohol.

Doing so may adversely affect the sur-

face, e.g., discoloration. In addition, do not use commercially-available household cleaners

and cosmetics, as they may contain components harmful to the surface.

Two quick taps, but on the

second tap leaving your fin-

ger down (applying pres-

sure) and moving it on the

work surface.

While holding down the but-

ton, moving your finger on

the work surface.

Function Operation

Moving the Cursor

Tapping/Clicking

Double-Tapping/

Double-Clicking

Dragging

Scroll

Scroll a document

(The movements will dif-

fer depending on the ap-

plication.)

Move the tip of your finger

lightly over the work surface.

tapping

clicking

double-clickingdouble-tapping

NOTE

Operation

Reference Manual

The Reference Manual and the Important Tips can be accessed on your computer. When a

printer is connected, these manuals can also be printed.

Illustrations may be difficult to view depending on the magnification. If the illustra-

tion is too small, magnify the display.

When the taskbar is hidden at the bottom portion of Acrobat Reader, set the maximum

display window size.

If a printer is connected, we recommend printing pages. The illustrations and display

samples may not print with a high quality.

NOTE

Reference Manual

The Reference Manual explains functions for you to make greater use of the computer,

such as how to add peripheral devices, how the Setup Utility works, and other useful infor-

mation. (Refer to the cover of this manual for a list of the main contents included.)

How to access the Reference Manual

Select [Reference Manual] in [start].

Important Tips

Important Tips provides information on how to maximize use of the battery pack, which is

necessary for computing away from your home or office.

How to access the Important Tips

Select on the desktop.

Important Tips can also be accessed from [start] - [All Programs] - [Panasonic] - [On-

Line Manuals] - [Important Tips].

When the Reference Manual or Important Tips is accessed for the first time, the License Agree-

ment of the Acrobat Reader may be displayed. If it is displayed, after reading the agreement,

select [Accept] to access the Reference Manual or Important Tips.

Refer to Acrobat Reader Help to use the Acrobat Reader.

Reference Manual / Important Tips

Operation

Useful Information

Handling

Display (LCD)

Use the soft cloth included with the computer. (For more information, refer to “Suggestions

About Cleaning the LCD Surface” that comes with the soft cloth.)

Avoid using water when cleaning the panel. Ingredients included in water may leave scratches

and reduce readability of the screen.

Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen.

Sweep dust/dirt with fine brush, then wipe it with a dry soft cloth used for cleaning glasses.

Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with a

dry soft cloth used for cleaning glasses.

Maintenance

This computer has been designed so as to minimize shock to the LCD and hard disk drive, the

leakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against such

trouble. Therefore, as a precision instrument, be extremely careful in the handling.

When carrying the computer, be sure to keep to the following:

Turn off the computer.

Remove all external devices, cables, PC Cards protruding from the computer (see figure on

the left), SD memory cards, and MultiMedia Cards before transporting the computer.

Do not drop or hit your computer against solid objects.

Do not carry your computer when it is on.

Do not place the computer upright or allow it to tip over. When the computer receives extremely

strong shock after falling, the hard disk or floppy disk drive, etc., may become inoperable.

Do not carry the computer while the display is open, or carry it by gripping the display.

Do not put anything (e.g., a piece of paper) between the display and keyboard.

Do not leave a disk in the drive while transporting your computer.

When taking an airplane, always carry your computer with you. Never check it in with

luggage. Before using the computer inside an airplane, we recommend asking the airlines

regarding their policy on this issue.

When transporting a spare battery pack inside a package, briefcase, etc., it is recommended

that it be placed in a plastic bag in order to protect its contacts.

We recommend the following:

Preparing a fully charged battery pack (and optional charger, if possible).

Making backup copies on discs and carrying them with you.

Areas excluding the display

Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the

soft cloth and firmly wringing out excess water.

Environment

Operation: Temperature: 5 °C to 35 °C {41 °F to 95 °F}

Humidity : 30% to 80% RH (No condensation)

Storage: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}

Humidity : 30% to 90% RH (No condensation)

Places not to use your computer

Such areas may result in damage to the computer.

Areas with electronic equipment

These areas may interfere with your display or cause your computer to produce strange sounds.

Areas with extremely high/low temperatures

Do not leave things near the computer that are sensitive to heat. During operation, the

computer may become warm.

Usage Environment

La page charge ...

Panasonic Laptop CF-73 Manuel utilisateur

Marque: Panasonic

Modèle: Laptop CF-73

Taper: Manuel utilisateur

Ce manuel convient également à

CF-73

Télécharger le PDF

rapport

dans d''autres langues

English: Panasonic Laptop CF-73 User manual

Panasonic Laptop CF-73 Manuel utilisateur

Ce manuel convient également à

Panasonic Laptop CF-73 Manuel utilisateur

dans d''autres langues

Documents connexes