Amazfit PowerBuds Pro
1
01 Package Contents
Charging case USB Type-C
charging cable
Earbuds (in the
charging case)
4 sizes of earplugs (M-size earplugs are
pre-installed on the earbuds)
S M XLL
Product manual
2
02 About the Earbuds
Indicator Type-C charging portFeature button
Heart rate window
(right ear only)
Pressure-sensitive
button
Microphone
Microphone
Microphone
Earplug
Charging contacts
03 Using Your Earbuds
Install the Zepp app to experience more features.
Scan the QR code below with your phone to download and install the
latest version of the app.
3
Installing the Zepp app
4
* Keep Bluetooth on when you are performing device pairing and using
the earbuds. We recommend charging the earbuds before use.
Start the app and log in or register an account.
Choose Profile > My Devices > Add to add the Amazfit PowerBuds Pro.
Open the charging case cover, press and hold the feature button for 2
seconds, and complete pairing as prompted. When you open the charging
case cover for the first time, the earbuds automatically enter the pairing state.
1.
2.
3.
Pairing with the App
5
Choose the earplugs that best fit your ear canals based on the noise
cancellation eect and comfort.
Align the positioning hole on the earplug with the positioning slot at the
earbud mouthpiece.
Replacing the Earplugs
Positioning slot
Positioning hole
6
For better noise cancellation eect, adjust the earbuds to ensure that
they fit closely with your ear canals.
Wearing the Earbuds
Long press the pressure-sensitive button: switch among Active Noise
Cancellation on, Thru Mode, and Active Noise Cancellation o.
Press the pressure-sensitive button once: play, pause, or answer a call.
Press the pressure-sensitive button twice: skip to the next song or reject a call.
Press the pressure-sensitive button three times: wake up the device voice
assistant.
1.
2.
3.
4.
* You can personalize features of the left and right earbud buttons in the app.
* Voice assistant support may vary depending on the device brand and model.
7
Controlling the Earbuds
Pressure-sensitive
button
Place earbuds into the charging case, which will automatically charge the
earbuds.
Use the USB Type-C charging cable to charge the charging case.
Charging the Earbuds
8
After the earbuds are connected to the device, you can check the power
of the earbuds and the charging case in the app.
Open the lid or press the charging case feature button. The white indicator
on the charging case indicates sucient power, and the red indicator
indicates that the power is low and the case needs to be charged.
Viewing Battery Level
04 Basic Specifications
Product model: earbuds A2030; charging case A2031
Battery capacity: earbuds 70 mAh; charging case 510 mAh
Charging case input: 5 V 0.8 A
Charging case output: 5 V 0.3 A
Bluetooth frequency: 2400–2483.5 MHz
BLE output power: <8 dBm
System requirements: Android 5.0 or iOS 10.0 or later
Wireless connection: Bluetooth 5.0, BLE
Waterproof and dustproof rating: earbuds IP55
Functional ambient temperature: 0°C-45°C
HVIN: A2030-Left, A2030-Right
9
10
Tips:
The Amazfit PowerBuds Pro has a waterproof and dustproof rating of
IP55. They are resistant to sweat and moderate rain, but cannot be
immersed in water and are not suitable for any water activities. Do not
wear the earbuds while swimming or showering. Do not charge the
earbuds in the wet environment. If the earbuds come into contact with
liquid, wipe them dry with a soft, dry, and lint-free cloth. The charging
case is not waterproof. Keep it dry and clean.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Anhui Huami Information Technology Co., Ltd. is
under license. Other trademarks and trade names are
those of their respective owners.
05 Regulatory Notice
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC ID: 2AC8UA2030
Any changes or modifications that are not expressly approved by the
party responsible for the compliance may void the user’s authority to
operate the device.
11
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
12
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
IC: 21806-A2030 CAN ICES-003(B)/NMB-003(B)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radioexempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
13
14
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent
émetteur radio peut fonctionner avec une antenne d'un type et d'un gain
maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l'intention
des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.
06 Disposal and Recycling Information
15
All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not
be mixed with unsorted household waste. Instead, you should
protect human health and the environment by handing over
your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed
by the government or local authorities. Correct disposal and recycling
will help prevent potential negative consequences to the
environment and human health. Please contact the installer
or local authorities for more information about the location
as well as terms and conditions of such collection points.
07 Certifications and Safety Approvals
16
Hereby, Anhui Huami Information Technology Co., Ltd.
declares that the radio device type A2030 is in compliance
with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
https://support.amazfit.com/en/
Hereby, Anhui Huami Information Technology Co., Ltd.
declares that the radio device type A2030 is in compliance
with Radio Equipment Regulations 2017 (S.I. 2017/1206). The
full text of the UK declaration of conformity is available at
the following internet address:
http://en.amazfit.com/support.html
08 Battery Safety
17
This device is equipped with a built-in battery that cannot be removed or
replaced. Do not disassemble or modify the battery by yourself.
– Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery can result in an explosion.
– Leaving a battery in an extremely high temperature surrounding
environment can result in an explosion or the leakage of flammable liquid
or gas.
– A battery subjected to extremely low air pressure may result in an
explosion or the leakage of flammable liquid or gas.
Use a power adapter that has passed compulsory certification and meets
standard requirements for charging.
This product and its accessories are small parts. Keep the product and its
accessories out of the reach of children. Children may inadvertently
damage the product and its accessories, or may swallow small parts, and
thereby be exposed to choking or other risks. When not in use, store the
earbuds in the charging case and keep away from children and pets.
1.
2.
09 Safety Notice
Before using this product, please read and follow the precautions below to
ensure the best product performance and avoid dangerous or illegal
situations.
18
When you use the earbuds to listen to music or answer calls, you
are recommended using the minimum volume required for music
or calls to avoid hearing loss. Using the earbuds at high volume
for long periods of time may cause permanent hearing loss.
19
Some people are allergic to plastic, silicone, and other materials.
Long-term contact with the body may cause redness, swelling,
inflammation, and other symptoms. Any user who experiences such
conditions should stop using the product and consult a doctor.
This product contains lithium batteries. Do not disassemble, knock,
squeeze, or put the product into fire. If there is severe swelling, stop
using this product. Additionally, do not expose this product to
high-temperature environments.
This product contains components and radio transmitters that
generate electromagnetic fields which may interfere with pacemakers,
defibrillators, hearing aids, or other medical equipment. Keep the
product a safe distance from medical equipment. Consult your
medical device manufacturer for restrictions on the use of medical
devices. If you suspect that this product is interfering with your
pacemaker, defibrillator, hearing aid, or other medical devices,
immediately stop using it.
3.
4.
5.
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
dans d''autres langues
- English: Amazfit PowerBuds Pro User guide