MartinLogan Icon 3XW Manuel utilisateur

Marque: MartinLogan

Modèle: Icon 3XW

Catégorie: Haut-parleurs de voiture

Taper: Manuel utilisateur

Ce manuel convient également à

user’s manual

WARNING!

• Refer servicing to a qualified

technician.

• To prevent fire or shock hazard,

do not expose this module to moisture.

• Turn the amplifier off should any abnormal

conditions occur.

• Do not drive speaker beyond its rated power.

Content Check List .....................3

Connection ..........................4

Protect Your Investment .................4

Break-In ............................4

Speaker Placement ....................4

Achieving Superior Imaging ............4

Balancing Hard vs. Soft Surfaces Improves

High- and Mid-Frequency Performance ....4

Choosing a Mounting Location ..........5

Balancing Bass Output................5

Painting the Speaker Grille ..............5

Installation ..........................6

Dimensional Drawings ..................8

Frequently Asked Questions .............10

Troubleshooting ...................... 10

Contacting Customer Service ............11

General Information ..................11

Serial Number .....................11

Service .........................11

Warranty Information ................11

Specifications .......................14

Serial Number:_____________________________

Record your serial number here for easy reference.

You need this information when filling out your

warranty registration. The serial number is located

near the binding posts and on the product carton.

Per the European Union WEEE (Waste

Electrical and Electronic Equipment)

directive effective August 13, 2005,

we would like to notify you that this product may

contain regulated materials which upon disposal,

according to the WEEE directive, requires special

reuse and recycling processing. For this reason,

Martin Logan has arranged with our distributors

in European Union member nations to collect and

recycle this product at no cost to you.

To find your local distributor, please contact the

dealer from whom you purchased this product,

email [email protected] or visit the distributor

locator at www.martinlogan.com.

Please note, only this product itself falls under the

WEEE directive. When disposing of the pack-

aging and other related shipping materials, we

encourage you to recycle these items through the

usual channels.

The lightning bolt flash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the presence

of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.

The exclamation point within an equilat-

eral triangle is intended to alert the user

to the presence of important operating and

maintenance (servicing) instructions in the litera-

ture accompanying the appliance.

The fire within an equilateral triangle is

intended to alert the user to the potential

of creating a fire hazard if they do not follow

the instructions.

The dollar sign within an equilateral tri-

angle is intended to alert the user that

they run the risk of causing damage that could

be potentially expensive to repair if they don’t

follow the instructions.

Icon 3XW

Tribute 5XW

Monument 7XW

Content CheCk List

Your new MartinLogan loudspeaker includes the following items. Should you require assistance, please

call our service department at (785) 749-0133.

Install Template • Grille Cover • Grille Scrim • Baffle Trim • Torx T20 Driver

These speakers are designed with easy-to-use push-

style binding posts that accept bare wire (fig. 1).

Assign the same color to the (+) and (–) terminals

on both the speaker and the amplifier. Make sure

that all connections are tight.

For convenience during installation, Tribute 5XW

and Monument 7XW feature binding posts on

both the top and bottom of the enclosure. Only

one set of connections is necessary.

ConneCtion

WARNING! Turn your amplifier

off before making or breaking any

signal connections!

• Use an amp that approximately matches the

speaker’s specified power handling.

• To avoid damage, turn down the volume of

the speaker is distorting, sounds harsh, or the

bass begins to break up.

• Tone controls and equalizers may increase

the likelihood of distortion, especially at high

volumes. Use these setting sparingly.

When you first begin to play your speakers, they

sound a bit bass shy, due to the high quality,

long-life components used in the drivers. Allow

approximately 72 hours of break-in at 90 dB

(moderate listening levels) before any critical listen-

ing.

Break-in

ProteCt Your investment

Achieving Superior Imaging

These MartinLogan in-wall speakers offer superb

imaging and flexible placement in nearly any loca-

tion. However, for best performance and imaging

place speakers equidistant from one another and

avoid physical obstructions between the speaker

and primary listening position.

Balancing Hard vs. Soft Surfaces Improves High-

and Mid-Frequency Performance

Rooms that are “overdamped” with carpeting, drapes,

and other sound absorbers can cause your system to

be dull and lifeless. On the other hand, rooms can

have so many hard surfaces that the system sounds

like a gymnasium. Experiment by adding or removing

soft surfaces until you find a mix that is right for you.

sPeaker PLaCement

Fig. 1

Choosing a Mounting Location

Install the speaker between wall studs. Be careful to

avoid electrical wires behind the wall and surfaces.

Balancing Bass Output

Corner placement of these speakers reinforces their

bass output. If you require balanced output across

the entire audio spectrum avoid mounting these

speakers in a corner.

When choosing placement, follow these simple tips:

• Place a minimum of 12 inches (30 cm) from

any wall corner.

• Place front and center channels equidistant

between 10–14 feet (3–4.3 m) from the lis-

tening position.

Painting the sPeaker griLLe

IMPORTANT! Before painting, remove the grille from

speakers and remove the cloth scrim attached inside

the grille. The speaker includes an extra scrim.

1. Remove the grille from the speaker. A protec-

tive cloth scrim is attached to the back of the

grille with a low-tack adhesive. Remove this

scrim by gently pulling it away from the grille

and discard it.

2. Paint the grille, being careful not to plug the

holes. Allow the paint to dry completely before

proceeding. IMPORTANT! For best results

use a spray rather than a brush or roller.

3. Gently press the new scrim into place before

reinstalling the speaker grille.

instaLLation

NOTE: These instructions assume the mounting sur-

face is of standard wood frame and conventional

sheetrock construction. If you wish to mount the

speakers to another type of material, you should

contact a bonded contractor.

NOTE: See your local dealer for new construction

pre-install brackets (sold separately).

WARNING! Before installing

check local building codes to

verify compliance with local regu-

lations. WARNING! Before install-

ing check for obstructions behind

drywall. To do this make a small

cut-out, cutting at a 45° angle (this

makes the hole easier to patch if

you find obstacles. Only cut out

the mounting hole after you have

verified there are no obstructions

behind the drywall. WARNING!

Use speaker cable rated for in-wall

use. The UL standard is CL2, CL3,

and CM. The CSA standard is

FT4. WARNING! Turn your ampli-

fier off before making or breaking

any signal connections.

Recommended tools:

• Stud finder

• Sharp pencil or pen

• Pushpin

• Drywall knife/saw

• Wire strippers

• Electric drill

• Tape measure

• Low-tack tape

1. Using a stud finder, position the template

centered between wall studs or ceiling joists.

2. Hold or pin the template in place and mark

cut-out with a pencil.

3. Remove the template and cut out the opening

with a drywall knife/saw.

4. Place fiberglass insulation above and below

the cut-out hole. Place a half thick piece of

fiberglass insulation behind the speaker.

5 Connect speaker cable. Be consistent when

connecting speaker leads to the terminals

on the speaker. Take great care to assign

the same color to the (+) terminal on both

the speaker and the amplifier. For conve-

nience during installation, Tribute 5XW and

Monument 7XW feature binding posts on

both the top and bottom of the enclosure.

Only one set of connections is nec-

essary.

Fig. 2

WARNING! Turn your amplifier

off before making or breaking any

signal connections!

6 Place the speaker in the hole. Monument

7XW: Orient the speaker’s unmarked mid-

range driver (the driver without ‘MartinLogan’

printed on it) so that it is the closest to the

listener’s ear level at the primary listening

position.

7 Use the supplied Torx T20 driver and an

electric drill to lock all mounting locks in

place. Use a low clutch setting on the drill.

8 Always use the Folded Motion XT tweeter in

a vertical orientation. If the speaker’s instal-

lation is horizontal, the tweeter needs to

rotate 90 degrees. To do this, remove alu-

minum baffle (if installed) and using a Phillips

screwdriver, remove the four screws holding

the tweeter assembly in place. Rotate the

tweeter to the correct orientation then screw

the assembly back into place (fig 2).

9 Gently press the trim baffle into place.

Place the magnetic grill cover over the speaker.

10.6 in.

(269.2mm)

4.09 in.

(103.93mm)

0.31 in.

(7.8mm)

9.04 in.

(229.6mm)

31.13 in. (790.82mm)

29.57 in. (751mm)

Binding

Posts

Binding

Posts

Cutout Dimensions (including tolerance)

9.29 x 29.82 in. (236 x 757mm)

Fig. 4: Tribute 5XW

9.94 in.

(252.6mm)

4.11 in.

(104.3mm)

0.31 in.

(7.8mm)

8.39 in.

(213mm)

15.98 in. (405.95mm)

14.41 in. (366.13mm)

Binding

Posts

Cutout Dimensions (including tolerance)

8.64 x 14.66 in. (219 x 372mm)

Fig. 3: Icon 3XW

DimensionaL Drawings

10.6 in.

(269.2mm)

4.11 in.

(104.3mm)

0.31 in.

(7.8mm)

9.04 in.

(229.6mm)

46.86 in. (1190.2mm)

45.32 in. (1151mm)

Binding

Posts

Binding

Posts

Cutout Dimensions (including tolerance)

9.29 x 45.57 in. (236 x 1157mm)

Fig. 5: Monument 7XW

No Output

• Check that all your system components are

turned on, are not muted, and that your bal-

ance control (if applicable) correct.

• Check to make sure your power outlet at the

wall is working.

• Check your power cords, speaker wires, and

interconnecting cables.

• Check to make sure no headphones are

plugged in.

• Swap speaker wires at your amplifier with

those of a speaker that is functioning cor-

rectly. If the lack of output moves to a

different speaker, the problem could be with

other equipment in your system (i.e., amp,

pre-amp, processor, and such).

• Try hooking up a different set of speakers.

The lack of output could point to a problem

with other equipment in your system (i.e.,

amp, pre-amp, processor, and such).

Lack of Bass or Poor Imaging

• Check your speaker wires. Is the polarity cor-

rect — (+) to (+) and (–) to (–).

trouBLeshooting

How do I clean my speakers? Use a clean

cloth or a soft brush to remove the dust from your

speakers. Do not spray any cleaning agents on or

near the drivers.

What size amplifier should I use? We rec-

ommend an amplifier rated within the suitable

amplifier range of your speaker.

Could you suggest a list of suitable electronics

and cables that would be ideal for MartinLogan

speakers? The area of electronics and cable

choice is probably the most common type of

question that we receive. It is also the most

subjective. We have repeatedly found that brands

that work well in one setup drive listeners nuts in

another. We use many brands with great success.

Again, we have no favorites; we use electronics

and cables quite interchangeably. We would

suggest listening to many brands—and above all

else—trust your ears. Dealers are always the best

source for information when purchasing additional

audio equipment or cables and are well versed in

the subject of special safety requirements for in-wall

cable.

Will exposure to sunlight affect the life or

performance of my speakers? We recommend

that you not place any loudspeaker in direct

sunlight. The ultraviolet (UV) rays from the sun can

cause deterioration of grille cloth and speaker

cones. Small exposure to UV does not create a

problem. In general, the filtering of UV rays through

glass significantly reduces the adverse effects.

FrequentLY askeD questions

MartinLogan customer service is available Monday

– Friday between the hours of 8 am – 5 pm

(central time) by calling (785) 749-0133 or by

emailing [email protected].

ContaCting Customer serviCe

SERIAL NUMBER

You can locate the serial number on the back of

the speaker and the product carton.

SERVICE

Should your MartinLogan product be used in a

country other than where initially purchased, we

ask that you note the following:

1 The appointed MartinLogan distributor for any

given country is only responsible for warranty

servicing on units distributed by or through it in

that country, per its applicable warranty.

2 Should a MartinLogan product require service

in a country other than the one in which ini-

tially purchased, the end-user may seek to have

repairs performed by the nearest MartinLogan

distributor, subject to that distributor’s local ser-

vicing policies. The owner of the MartinLogan

product must bear the cost of all repairs (parts,

labor, transportation, and such).

3 If, after owning your speaker for six months,

you relocate to a country other than the one

in which you purchased your speaker, your

warranty may be transferable. Contact

MartinLogan for details.

WARRANTY INFORMATION

Thank you for purchasing a MartinLogan product.

All MartinLogan products meeting the conditions

set forth here are eligible to receive the Limited

Warranty. Please retain your sales receipt for proof

of warranty terms and proof of purchase from an

authorized MartinLogan dealer or distributor in

the United States or Canada. Please register your

purchase on the Online Warranty Registration sys-

tem (https://www.martinlogan.com/register) on

MartinLogan.com.

Limited Warranty and Duration

MartinLogan, Ltd. warrants the product designated

herein to be free of manufacturing defects in mate-

rial and workmanship, subject to the conditions

and for a period set forth below. This Warranty

expires on the anniversary of the date of delivery.

The Limited Warranty period on MartinLogan prod-

ucts is as follows:

• Five (5) Years – Floorstanding, bookshelf, and

on-wall speakers;

• Five (5) Years – On-wall, in-wall, and in-ceiling

speakers;

• Three (3) Years – Powered subwoofers;

• Three (3) Years – Outdoor Living Series satellite

speakers and subwoofers;

• Two (2) Years – Installer Series outdoor/all-

weather speakers;

• Two (2) Years – Soundbars, separate power

amplifiers and pre-amplifiers, and fully pow-

ered speakers;

• One (1) Year – Headphones.

generaL inFormation

How can you be sure to find a current

authorized MartinLogan Dealer?

Only dealers found on the following pages are

current authorized MartinLogan dealers. Goods

purchased from any entity not found on these

lists list are not entitled to MartinLogan Limited

Warranty coverage:

• Authorized Online Dealers

https://www.martinlogan.com/locator

• Authorized United States Dealers

https://www.martinlogan.com/locator

• Authorized Canadian Dealers

https://www.martinlogan.com/locator

What is required for the Limited Warranty of

MartinLogan products?

• Purchase of a new MartinLogan product from

an authorized MartinLogan dealer or distributor

in the United States or Canada;

• A copy of the original receipt of sale from an

authorized MartinLogan dealer or distributor in

the United States or Canada.

Limitations

• Warranty begins on the date of delivery;

• A copy of the original sales receipt from an

authorized MartinLogan dealer or distributor

in the United States or Canada is required for

any warranty work;

• This Warranty is for the sole benefit of the

original purchaser of the covered product,

is restricted to the original purchaser, and

requires the purchase of a new product;

• This warranty is not transferrable to a subse-

quent purchaser of the product;

• Warranty applies to product in normal home use

only. If product is subjected to any conditions

outlined in the next section, warranty is void;

• Warranty does not apply if the product is used

in professional or commercial applications.

The Warranty is Void or Inapplicable if:

• The product was not purchased from an autho-

rized MartinLogan dealer or distributor in the

United States or Canada;

• The serial number has been removed or

defaced;

• The product has been used or handled other

than in accordance with the instructions in the

owner’s manual;

• The product has been used in conjunction with

unsuitable or faulty equipment;

• The product has been abused or misused,

damaged by accident or neglect, or in being

transported;

• The defect is due to the product being repaired

or tampered with by anyone other than

MartinLogan or an authorized MartinLogan

repair center.

Owner Responsibilities:

• Provide normal/reasonable operating care

and maintenance;

• Prior to returning a product to MartinLogan for

repairs covered by the Limited Warranty, the

dealer from whom the speaker was purchased

should first be contacted to see if they can

resolve the issue;

• If a product is returned to MartinLogan for war-

ranty work:

o The product must be properly packaged

and shipped to MartinLogan or an autho-

rized MartinLogan repair center by the

customer at his or her sole expense;

o The product must be accompanied by

an RMA number, obtained from the

MartinLogan service department (service@

martinlogan.com);

o The product must be accompanied by a writ-

ten description of the defect and proof of the

date of purchase in the form of a copy of

the original sales receipt from an authorized

MartinLogan dealer or distributor.

Warranty Outside of the United States and Canada

This warranty applies only to purchases made from

authorized MartinLogan dealers and distributors in

the United States and Canada. For warranty terms,

conditions, and support elsewhere, please con-

tact the authorized MartinLogan distributor in the

country where your purchase was made. Warranty

outside the US and Canada is established and

provided by authorized MartinLogan distributors

around the world.

Refurbished Products Warranty Information

MartinLogan refurbished products may be lightly

pre-owned, demonstration, test products, or factory

closeouts that have undergone rigorous inspection

to ensure they meet MartinLogan’s strict quality

standards for both sonic performance and mechan-

ical integrity. We back every refurbished product

with a Refurbished product warranty.

Our refurbished products are packaged in factory

packaging, complete with all documentation and

where applicable, the accessories that normally

ship with the product. On occasion, refurbished

products may contain minor cosmetic blemishes,

but will sonically perform to our industry leading full

performance standards.

Each refurbished product:

• Has undergone rigorous inspections to ensure it

meets our strict quality standards.

• Is put through full testing to guarantee optimal

sonic performance and mechanical integrity.

• Is supplied with complete documentation.

• Is supplied with a one (1) year non-cosmetic war-

ranty (Headphones offer a 30 day warranty).

• Where applicable, is supplied with cables,

remote control and accessories.

• Where applicable, firmware is updated to the

latest version.

• Is given a new refurbished serial number.

• Comes in factory product packaging with a

“Refurbished” label.

• May have minor cosmetic blemishes.

Remedy

In the event the product fails during the warranty

period and the above conditions are met, the pur-

chaser’s sole remedy under this Warranty shall be

to return the product to MartinLogan or an autho-

rized MartinLogan repair center where the defect

will be rectified without charge for parts or labor.

Conditions

MartinLogan reserves the right to modify the design

of any product without obligation to purchaser of

previously manufactured products and to change

the prices or specifications of any product without

notice or obligation to any person.

Exclusions

Any implied warranties relating to the above prod-

uct shall be limited to the duration of the above

Warranty. This Warranty does not extend to any

incidental or consequential costs or damages to the

purchaser. Some states do not allow limitations on

how long an implied warranty lasts or an exclusion

or limitation of incidental or consequential damag-

es, so the above limitations or exclusions may not

apply to you. This Warranty gives you specific legal

rights, and you may also have other rights which

vary from state to state. This Warranty represents

a limited warranty as per definition by the Federal

Trade Commission (Magnuson-Moss Act).

*Specifications are subject to change without notice.

sPeCiFiCations*

System Frequency Response ...............

Tweeter Dispersion (horizontal x vertical)......

Sensitivity.............................

Impedance ............................

Crossover Frequency.....................

Tweeter Aiming ........................

High-Frequency Driver ...................

Mid-Frequency Driver ....................

Low-Frequency Driver....................

Controls ..............................

Passive Radiator........................

Binding Post Inputs ......................

Components...........................

Suitable Amplifier Range .................

Maximum Power Handling ................

Weight...............................

Overall Size (height x width x depth).........

Required Opening (including tolerance) .......

Projection From the Wall Surface............

Depth Required Behind the Wall Surface ......

Icon 3XW

78–25,000 Hz ± 3 dB

80° x 30°

94 dB @ 2.83 volts/meter

4 ohms. Compatible with 4, 6, or 8 ohm rated amps.

2400 Hz

Rotatable tweeter for horizontal

or vertical installations

1.25 x 2.4” (3.2 x 6.1 cm) Folded

Motion XT Obsidian transducer with 4.5

x 2.75” (11.4 x 7 cm) diaphragm.

—

Two 5.25” (13.33 cm) black carbon fiber cone

with (unidirectional) eleven sections, Nomex

backer cone, and cast aluminum basket, sealed

back chamber format. Concave dust cap.

—

Push style

Custom air core coil inductors, polypropylene

film capacitors in series, and low DF electrolytic

capacitors. Thermal/current protection.

20–250 watts

125 watts

15.5 lb (7 kg)

15.98 x 9.94 x 4.11” (405.95 x 252.6 x 104.3 mm)

14.66 x 8.64” (372 x 219 mm)

0.31” (7.8 mm)

3.8” (96.5 mm)

Tribute 5XW

71–25,000 Hz ± 3 dB

80° x 30°

94 dB @ 2.83 volts/meter

4 ohms. Compatible with 4, 6, or 8 ohm rated amps.

2250 Hz

Rotatable tweeter for horizontal

or vertical installations

1.25 x 2.4” (3.2 x 6.1 cm) Folded

Motion XT Obsidian transducer with 4.5

x 2.75” (11.4 x 7 cm) diaphragm.

—

Two 5.25” (13.33 cm) black carbon fiber cone

with (unidirectional) eleven sections, Nomex

backer cone, and cast aluminum basket, sealed

back chamber format. Concave dust cap.

Two 6.5” (16.51 cm) black carbon fiber cone

with (unidirectional) eleven sections, Nomex

backer cone, and cast aluminum basket, sealed

back chamber format. Concave dust cap.

Push style (two sets for easy installation)

Custom air core coil inductors, polypropylene

film capacitors in series, and low DF electrolytic

capacitors. Thermal/current protection.

20–250 watts

125 watts

25.5 lb (11.6 kg)

31.13 x 10.6 x 4.09” (790.82 x 269.2 x 103.93 mm)

29.82 x 9.29” (757 x 236 mm)

0.31” (7.8 mm)

3.8” (96.5 mm)

Monument 7XW

52–25,000 Hz ± 3 dB

80° x 30°

95 dB @ 2.83 volts/meter

4 ohms. Compatible with 4, 6, or 8 ohm rated amps.

200, 3200 Hz

Rotatable tweeter for horizontal

or vertical installations

1.25 x 2.4” (3.2 x 6.1 cm) Folded

Motion XT Obsidian transducer with 4.5

x 2.75” (11.4 x 7 cm) diaphragm.

6.5” (16.51 cm) black carbon fiber cone with

(unidirectional) 11 sections, Nomex

backer

cone, and cast aluminum basket, sealed

back chamber format. Concave dust cap.

Two 6.5” (16.51 cm) black carbon fiber cone

with (unidirectional) eleven sections, Nomex

backer cone, and cast aluminum basket, sealed

back chamber format. Concave dust cap.

Three 6.5” (16.51 cm) black carbon fiber cone

with (unidirectional) eleven sections, Nomex

backer cone, and cast aluminum basket, sealed

back chamber format. Concave dust cap.

Push style (two sets for easy installation)

Custom air core coil inductors, polypropylene

film capacitors in series, and low DF electrolytic

capacitors. Thermal/current protection.

20–300 watts

150 watts

44.5 lb (20.2 kg)

46.86 x 10.6 x 4.11” (1190.2 x 269.2 x 104.3 mm)

45.57 x 9.29” (1157 x 236 mm)

0.31” (7.8 mm)

3.8” (96.5mm)

Lawrence, Kansas, USA tel 785.749.0133 fax 785.749.5320 www.martinlogan.com

DuPont™ and Nomex® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

manuel de l’utilisateur

Liste de vérification du contenu ...........19

Raccordement........................20

Protéger votre investissement ............20

Rodage ............................20

Positionnement des enceintes ............20

Obtenir une image supérieure ..........20

L’équilibre entre les surfaces dures et molles

améliore le rendement des hautes et des

moyennes fréquences ..............20

Choisir un emplacement de montage .....21

Équilibrage de la sortie des graves.......21

Peinturer la grille de l’enceinte ...........21

Installation ..........................22

Plans Dimensionnels ...................24

Foire aux questions ...................26

Dépannage .........................26

Communiquer Avec le Service à la Clientèle..27

Renseignements Généraux ..............27

Numéro de série...................27

Service .........................27

Renseignements sur la garantie .........27

Spécifications ........................30

Numéro de Série :__________________________

Veuillez inscrire votre numéro de série ici pour pou-

voir vous y référer facilement. Vous aurez besoin

de ce renseignement lorsque vous remplirez votre

enregistrement à la garantie. Le numéro de série

est situé près des bornes de raccordement et sur

l’emballage du produit.

En vertu de la directive WEEE de l’Union euro-

péenne (directive sur les déchets électriques

et électroniques) entrée en vigueur le 13 août

2005, nous vous avisons que ce produit pourrait contenir

des matériaux réglementés dont l’élimination doit faire l’objet

de procédures de réutilisation et de recyclage particulières.

À cette fin, MartinLogan a demandé à ses distributeurs dans

les pays membres de l’Union européenne de reprendre et

de recycler ce produit gratuitement.

Pour trouver le distributeur le plus près, communiquez avec le

revendeur du produit, envoyez un courriel à info@martinlo-

gan.com ou consultez le site Web martinlogan.com.

Notez que seul le produit est régi par la directive

WEEE. Nous vous encourageons à recycler les matéri-

aux d’emballage et autres matériaux d’expédition selon

les procédures normales.

AVERTISSEMENT!

• Pour les réparations, faites appel

à un technicien compétent.

• Pour éviter les risques d’incendie

ou de décharge électrique, n’exposez pas ce

module aux vapeurs d’eau ni à l’humidité.

• Veuillez éteindre l’amplificateur en cas de

conditions anormales.

• Ne poussez pas l’enceinte au-delà de sa

puissance nominale.

Le symbole de l’éclair avec une pointe en forme

de flèche, dans un triangle équilatéral, avertit

l’utilisateur de la présence d’une « tension dangereuse

» potentielle près du produit qui peut être suffisante pour

constituer un risque de décharge électrique.

Le point d’exclamation dans un triangle équi-

latéral avertit l’utilisateur de la présence de

directives importantes en matière de fonctionnement

et d’entretien (service) dans les documents qui accom-

pagnent l’appareil.

Le symbole de feu dans un triangle équilaté-

ral avertit l’utilisateur du risque de créer un

incendie s’il ne suit pas les instructions.

Le symbole de dollar dans un triangle équila-

téral avertit l’utilisateur qu’il coure le risque de

causer des dommages potentiellement dispendieux à

réparer s’il ne suit pas les instructions.

Gabarit d’installation • Couvercle de la grille • Grille canevas • Garniture déflecteur • L’embout de tournevis Torx T20

Liste De vériFiCation Du Contenu

Vous trouverez les éléments suivants dans la boîte pour votre nouvelle enceinte MartinLogan. Si vous avez

besoin d’aide, veuillez appeler notre département de service en composante le 785-749-0133.

Icon 3XW

Tribute 5XW

Monument 7XW

raCCorDement

• Utilisez un amplificateur qui correspond

approximativement à la puissance admissible

de l’enceinte.

• Pour éviter les dommages, baissez le volume

si le son de l’enceinte est déformé ou dur, ou

si les graves commencent à couper.

• Les commandes de tonalité et les égalisateurs

peuvent accroître les possibilités de déforma-

tion du son, particulièrement à volume élevé.

Utilisez ces commandes avec parcimonie.

Protéger votre investissement

Quand vous commencez à l’utilisez les enceintes,

les graves peuvent sonner un peu diminuées. Cette

situation est due aux composants de haute qualité

et à durée de vie élevée utilisés dans les haut-par-

leurs. Un rodage d’environ 72 heures à 90 dB

(niveaux d’écoute moyens) est nécessaire avant

toute écoute critique.

roDage

Obtenir une image supérieure

Ces enceintes MartinLogan encastrables au une

superbe image et un positionnement flexible

presque partout. Toutefois, pour obtenir le meilleur

rendement possible et la meilleure image, placez

les enceintes à équidistance les unes des autres et

éviter les obstacles physiques entre l’enceinte et la

position d’écoute principale.

L’équilibre entre les surfaces dures et molles

Positionnement Des enCeintes

Ces enceintes sont dotées de bornes de raccorde-

ment facile à utiliser de style bouton-poussoir qui

acceptent les fils nus (fig. 1).

Attribuez la même couleur aux bornes (+) et (-) sur

l’enceinte et l’amplificateur. Assurez-vous que tous

les raccords sont bien faits.

Pour plus de commodité lors de l’installation,

Tribute 5XW et Monument 7XW comportent des

bornes de reliure en haut et en bas de l’enceinte.

Un seul ensemble de connexions est

nécessaire.

AVERTISSEMENT! Éteignez

l’amplificateur avant de faire des

raccordements ou d’interrompre

tout raccordement de signal!

Fig. 1

La page charge ...

MartinLogan Icon 3XW Manuel utilisateur

Marque: MartinLogan

Modèle: Icon 3XW

Catégorie: Haut-parleurs de voiture

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: MartinLogan Icon 3XW User manual

Documents connexes

Autres documents

FS FVFL-204 Mode d'emploi