Simplicity 01655-2 Manuel utilisateur

Marque: Simplicity

Modèle: 01655-2

Catégorie: Accessoires pour véhicules automobiles

Taper: Manuel utilisateur

Owner’s Manual / Manuel de l'Utilisateur

Model No. 1655-2 (5,500 Watt AC Generator) Manual No. 195222GS Revision 1 (06/06/2005)

Questions? Help is just a moment away!

Vous avez des questions? Vous n'avez pas besoin d'aller loin pour trouver de l'aide!

Call: Generac Generator Helpline / Appelez la ligne d'assistance de Generac Motor - 1-800-270-1408 M-F 8-5 CT

Web: www.briggsandstratton.com

BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC

JEFFERSON,WISCONSIN, U.S.A.

Generac Portable Products is a licensed trademark of Briggs & Stratton Power Products.

Generac Portable Products est une marque déposéee autorisée de Briggs & Stratton Power Products.

Before using this product, read this manual and follow all

Safety Rules and Operating Instructions.

CAUTION

Avant d’utiliser ce produit, veuillez lire le manuel et suivre

toutes les directives relatives à la sécurité et à l’utilisation.

ATTENTION

WheelHouse™ 5500 Watt Generator

TABLE OF CONTENTS

Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Know Your Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

EQUIPMENT

DESCRIPTION

Read this manual carefully and become

familiar with your generator. Know its

applications, its limitations and any hazards

involved.

This generator is an engine–driven, revolving field,

alternating current (AC) generator. It was designed to

supply electrical power for operating compatible electrical

lighting, appliances, tools and motor loads.The generator’s

revolving field is driven at about 3,600 rpm by a single-

cylinder engine.

CAUTION! DO NOT exceed the generator’s

wattage/amperage capacity. See “Don’t Overload

Generator”.

Every effort has been made to ensure that information in

this manual is accurate and current. However, we reserve

the right to change, alter or otherwise improve the product

and this document at any time without prior notice.

The Emission Control System for this generator is

warranted for standards set by the Environmental

Protection Agency. For warranty information refer to the

engine owner’s manual.

SAFETY RULES

This is the safety alert symbol. It is used to

alert you to potential personal injury hazards.

Obey all safety messages that follow this

symbol to avoid possible injury or death.

The safety alert symbol ( ) is used with a signal word

(DANGER, CAUTION,WARNING), a pictorial and/or a

safety message to alert you to hazards. DANGER indicates

a hazard which, if not avoided, will result in death or

serious injury. WARNING indicates a hazard which, if not

avoided, could result in death or serious injury.

CAUTION indicates a hazard which, if not avoided, might

result in minor or moderate injury. CAUTION, when used

without the alert symbol, indicates a situation that could

result in equipment damage. Follow safety messages to

avoid or reduce the risk of injury or death.

Hazard Symbols and Meanings

The engine exhaust from this product contains

chemicals known to the State of California to cause

cancer, birth defects, or other reproductive harm.

WARNING

Fire

Explosion

Toxic Fumes

Hot Surface

Electrocution

Electrical Shock

Kickback

may be reproduced or transmitted in any form by any

means without the express written permission of Briggs &

Stratton Power Products Group, LLC.

SAVE THESE INSTRUCTIONS

WheelHouse™ 5500 Watt Generator

• This generator does not meet U. S. Coast Guard Regulation

33CFR-183 and should not be used on marine applications.

• Failure to use the appropriate U. S. Coast Guard approved

generator could result in death, serious injury and/or property

damage.

WARNING

• When using generator for backup power, notify utility

company. Use approved transfer equipment to isolate

generator from electric utility.

• Use a ground fault circuit interrupter (GFCI) in any damp or

highly conductive area, such as metal decking or steel work.

• DO NOT touch bare wires or receptacles.

• DO NOT use generator with electrical cords which are worn,

frayed, bare or otherwise damaged.

• DO NOT operate generator in the rain.

• DO NOT handle generator or electrical cords while standing

in water, while barefoot, or while hands or feet are wet.

• DO NOT allow unqualified persons or children to operate or

service generator.

Generator produces powerful voltage.

Failure to isolate generator from power utility

can result in death or injury to electric utility

workers due to backfeed of electrical energy.

WARNING

• Operate generator ONLY outdoors.

• Keep exhaust gas from entering a confined area through

windows, doors, ventilation intakes or other openings.

• DO NOT operate generator inside any building or enclosure,

including the generator compartment of a recreational vehicle (RV).

Running generator gives off carbon monoxide,

an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea,

fainting or death.

WARNING

WHEN ADDING OR DRAINING FUEL

• Turn generator OFF and let it cool at least 2 minutes before

removing fuel cap. Loosen cap slowly to relieve pressure in

tank.

• Fill or drain fuel tank outdoors.

• DO NOT overfill tank.Allow space for fuel expansion.

• Keep fuel away from sparks, open flames, pilot lights, heat, and

other ignition sources.

• DO NOT light a cigarette or smoke.

WHEN STARTING EQUIPMENT

• Ensure spark plug, muffler, fuel cap and air cleaner are in place.

• DO NOT crank engine with spark plug removed.

• If fuel spills, wait until it evaporates before starting engine.

WHEN OPERATING EQUIPMENT

• Do not tip engine or equipment at angle which causes fuel to

spill.

• This generator is not for use in mobile equipment or marine

applications.

WHEN TRANSPORTING OR REPAIRING

EQUIPMENT

• Transport/repair with fuel tank EMPTY or with fuel shutoff

valve OFF.

• Disconnect spark plug wire.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL

IN TANK

• Store away from furnaces, stoves, water heaters, clothes

dryers or other appliances that have pilot light or other

ignition source because they can ignite fuel vapors.

Fuel and its vapors are extremely flammable and

explosive.

Fire or explosion can cause severe burns or

death.

WARNING

WheelHouse™ 5500 Watt Generator

• DO NOT tamper with governed speed. Generator supplies

correct rated frequency and voltage when running at governed

speed.

• DO NOT modify generator in any way.

Excessively high operating speeds increase risk of injury

and damage to generator.

Excessively low speeds impose a heavy load.

CAUTION

• See “Don’t Overload Generator”.

• Start generator and let engine stabilize before connecting

electrical loads.

• Connect electrical loads in OFF position, then turn ON for

operation.

• Turn electrical loads OFF and disconnect from generator

before stopping generator.

Exceeding generators wattage/amperage capacity can

damage generator and/or electrical devices connected

to it.

CAUTION

• Use generator only for intended uses.

• If you have questions about intended use, ask dealer or call

1-800-270-1408.

• Operate generator only on level surfaces.

• DO NOT expose generator to excessive moisture, dust, dirt,

or corrosive vapors.

• DO NOT insert any objects through cooling slots.

• If connected devices overheat, turn them off and disconnect

them from generator.

• Shut off generator if:

-electrical output is lost;

-equipment sparks, smokes, or emits flames;

-unit vibrates excessively.

Improper treatment of generator can damage it and

shorten its life.

CAUTION

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR

GENERATOR

• Disconnect the spark plug wire from the spark plug and place

the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

• Use approved spark plug tester.

• DO NOT check for spark with spark plug removed.

Unintentional sparking can result in fire or

electric shock.

WARNING

• DO NOT touch hot surfaces.

• Allow equipment to cool before touching.

• The generator must be at least 5 feet from structures having

combustible walls and/or other combustible materials.

• Keep at least 3 feet of clearance on all sides of generator for

adequate cooling, maintenance and servicing.

• In the State of California a spark arrester is required by law

(Section 4442 of the California Public Resources Code). Other

states may have similar laws. Federal laws apply on federal

lands. If you equip the muffler with a spark arrester, it must be

maintained in effective working order.

Running engines produce heat.Temperature of

muffler and nearby areas can reach or exceed

150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush,

ect. can catch fire.

WARNING

• When starting engine, pull cord slowly until resistance is felt

and then pull rapidly to avoid kickback.

• NEVER start or stop engine with electrical devices plugged in

and turned on.

Rapid retraction of starter cord (kickback) will

pull hand and arm toward engine faster than

you can let go.

Broken bones, fractures, bruises or sprains could

result.

WARNING

WheelHouse™ 5500 Watt Generator

KNOW YOUR GENERATOR

Read this owner’s manual and safety rules before operating your generator.

Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and

adjustments. Save this manual for future reference.

120 Volt AC, 20 Amp

Duplex Receptacle

Fuel Tank

Choke Lever

Recoil Starter

(not shown)

Rocker Switch

120/240 Volt AC,

30 Amp Receptacle

Air Cleaner

Grounding Fastener

Oil Fill Cap/Dipstick

120 Volt AC, 20 Amp, Duplex Receptacle — May be

used to supply electrical power for the operation of

120 Volt AC, 20 Amp, single phase, 60 Hz electrical lighting,

appliance, tool and motor loads.

120/240 Volt AC, 30 Amp Locking Receptacle — May

be used to supply electrical power for the operation of

120 and/or 240 Volt AC, 30 Amp, single phase, 60 Hz

electrical lighting, appliance, tool and motor loads.

Air Cleaner — Protects engine by filtering dust and

debris out of intake air.

Choke Lever — Used when starting a cold engine.

Double Pole Circuit Breaker (AC) — A double pole

circuit breaker is provided to protect all the receptacles

and generator against electrical overload.

Fuel Tank — Capacity of 5 U.S. gallons (18.9 liters) of fuel.

Grounding Fastener — If required, please consult a

qualified electrician, electrical inspector, or local agency

having jurisdiction.

Oil Fill Cap/Dipstick — Check and add oil to engine

here.

Recoil starter — Used to start the engine.

Rocker Switch — Set this switch to "On" before using

recoil starter. Set switch to "Off" to switch OFF engine.

Double Pole Circuit

Breaker (AC)

WheelHouse™ 5500 Watt Generator

ASSEMBLY

Your generator requires some assembly and is ready for

use after it has been properly serviced with the

recommended oil and fuel. If you have any problems with

the assembly of your generator, please call the generator

helpline at 1-800-270-1408.

Remove Generator From Carton

1. Set the carton on a rigid flat surface.

2. Carefully open the top flaps of the shipping carton.

3. Cut down corners at ends of carton from top to

bottom and lay carton down flat.

4. Remove all packing material, carton fillers, etc.

5. Remove generator from shipping carton.

Carton Contents

Check all contents against those listed below:

• Main unit

• Handle

• Locking 30 Amp plug

• Engine oil

• Two packets of fuel stabilizer

• Handle attachment hardware

• Owner’s manual

• Engine manual

If any parts are missing or damaged, call the generator

helpline at 1-800-270-1408.

Attach Handle to Unit

1. Place handle assembly onto handle supports connected

to main unit. Make sure holes in handle align with

holes on handle supports (Figure 1).

NOTE: It may be necessary to move the handle supports

from side to side in order to align the handle so it will slide

over the handle supports.

2. Insert carriage bolts through holes from outside of the

unit and attach a plastic knob from inside of unit

(Figure 2).Tighten by hand.

Align Holes

Handle

Supports

Figure 1 — Attach Handle to Base

Figure 2 — Secure Handle

WheelHouse™ 5500 Watt Generator

BEFORE STARTING THE

ENGINE

Add Engine Oil

• Place generator on a level surface.

• Use a long neck funnel when adding or changing oil.

• Refer to engine owner’s manual and follow oil

recommendations and instructions.

NOTE: Check oil often during engine break–in. Refer to

engine owner’s manual for recommendations.

NOTE: The generator assembly rotates on a prelubricated

and sealed ball bearing that requires no additional

lubrication for the life of the bearing.

Add Fuel

NOTE: This gasoline engine is certified to operate on

gasoline. Exhaust Emission Control System: EM (Engine

Modifications).

1. Use clean, fresh, regular UNLEADED fuel with a

minimum of 85 octane. DO NOT use fuel which

contains Methanol. DO NOT mix oil with fuel.

2. Turn the vent knob fully counter-clockwise on the fuel

gauge to open it (Figure 3).

3. Clean area around fuel cap/gauge, remove cap.

4. Slowly add regular unleaded fuel to fuel tank. Be

careful not to overfill.Allow about 1.5" of tank space

for fuel expansion (Figure 4).

5. Install fuel cap and wipe up any spilled fuel.

6. If moving generator, turn the vent knob fully clockwise

on the fuel gauge to close it.

IMPORTANT: The vent knob should be closed whenever

you move the generator.

Vent Knob

As is common with all plastic fuel containers, the fuel tank

supplied with this generator may swell or expand due to

build-up of fuel vapors when the vent knob is closed.This

tank is designed and has been tested to safely withstand

pressure-buildup.The 'ballooning' condition is relieved by

turning the vent knob fully counterclockwise.

CAUTION

• Refer to engine manual for oil and fuel fill information.

• Damage to equipment resulting from failure to follow this

instruction will void warranty.

Any attempt to crank or start the engine before it has

been properly filled with the recommended oil will result

in equipment failure.

WHEN ADDING FUEL

• Turn generator OFF and let it cool at least 2 minutes before

removing fuel cap. Loosen cap slowly to relieve pressure in tank.

• Fill fuel tank outdoors.

• DO NOT overfill tank.Allow space for fuel expansion.

• Keep fuel away from sparks, open flames, pilot lights, heat, and

other ignition sources.

• DO NOT light a cigarette or smoke.

Fuel and its vapors are extremely flammable and

explosive.

Fire or explosion can cause severe burns or

death.

WARNING

Fuel

Tank

1.5” Air Space

Figure 4 - Fuel Expansion

Figure 3 — Vent Knob

Vent Knob

WheelHouse™ 5500 Watt Generator

USING THE GENERATOR

System Ground

The generator has a system ground that connects the

generator frame components to the ground terminals on

the AC output receptacles.The system ground is connected

to the AC neutral wire (see “Equipment Description”,

earlier in this manual).

Special Requirements

There may be Federal or State Occupational Safety and

Health Administration (OSHA) regulations, local codes, or

ordinances that apply to the intended use of the generator.

Please consult a qualified electrician, electrical inspector, or

the local agency having jurisdiction.

• In some areas, generators are required to be registered

with local utility companies.

• If the generator is used at a construction site, there may

be additional regulations which must be observed.

Connecting to a Building’s Electrical

System

Connections for standby power to a building’s electrical

system must be made by a qualified electrician.The

connection must isolate the generator power from utility

power, and must comply with all applicable laws and

electrical codes.

Generator Location

Generator Clearance

The generator must be at least 5 ft. (152 cm) from

structures having combustible walls and/or other

combustible materials. Leave at least 3 ft. (92 cm) all around

generator including overhead, for adequate cooling,

maintenance and servicing.

Place generator in a well ventilated area, which will allow

for removal of deadly exhaust gas. DO NOT place

generator where exhaust gas could accumulate and enter

inside or be drawn into a potentially occupied building.

Ensure exhaust gas is kept away from any windows, doors,

ventilation intakes or other openings that can allow

exhaust gas to collect in a confined area (Figure 5).

Prevailing winds and air currents should be taken into

consideration when positioning generator.

• When using generator for backup power, notify utility

company. Use approved transfer equipment to isolate

generator from electric utility.

• Use a ground fault circuit interrupter (GFCI) in any damp or

highly conductive area, such as metal decking or steel work.

• DO NOT touch bare wires or receptacles.

• DO NOT use generator with electrical cords which are worn,

frayed, bare or otherwise damaged.

• DO NOT operate generator in the rain.

• DO NOT handle generator or electrical cords while standing

in water, while barefoot, or while hands or feet are wet.

• DO NOT allow unqualified persons or children to operate or

service generator.

Generator produces powerful voltage.

Failure to isolate generator from power utility

can result in death or injury to electric utility

workers due to backfeed of electrical energy.

WARNING

• Operate generator ONLY outdoors.

• Keep exhaust gas from entering a confined area through

windows, doors, ventilation intakes or other openings.

• DO NOT operate generator inside any building or enclosure,

including the generator compartment of a recreational vehicle (RV).

Running generator gives off carbon monoxide,

an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea,

fainting or death.

WARNING

Figure 5 — Generator Clearance

Exhaust Port

Typical Generator Shown

WheelHouse™ 5500 Watt Generator

OPERATING THE

GENERATOR

Starting the Engine

Disconnect all electrical loads from the generator. Follow

these start instruction steps in numerical order:

1. Make sure unit is on a level surface.

IMPORTANT: Failure to start and operate unit on a level

surface will cause the unit not to start or shut down during

operation.

2. Turn the vent knob fully counter-clockwise to open it.

See Figure 3 on page 7.

IMPORTANT: If you don’t open the vent knob, fuel will

not flow into the fuel line causing the unit to not start.

3. Turn the fuel valve to the “On” position (Figure 6).The

fuel valve handle should be horizontal (pointing straight

across) for fuel to flow.

4. Start the engine according to instructions given in the

engine owner’s manual.

NOTE: If engine starts after 3 pulls but fails to run, or if

unit shuts down during operation, make sure unit is on a

level surface and check for proper oil level in crankcase.

This unit may be equipped with a low oil protection device.

See engine manual.

Connecting Electrical Loads

• Let engine stabilize and warm up for a few minutes after

starting.

• Verify the double pole circuit breaker is ON.

• Plug in and turn on the desired 120 and/or 240 Volt AC,

single phase, 60 Hz electrical loads.

• DO NOT connect 240 Volt loads to the 120 Volt receptacles.

• DO NOT connect 3–phase loads to the generator.

• DO NOT connect 50 Hz loads to the generator.

• DO NOT OVERLOAD THE GENERATOR. See

“Don’t Overload Generator”.

• See “Don’t Overload Generator”.

• Start generator and let engine stabilize before connecting

electrical loads.

• Connect electrical loads in OFF position, then turn ON for

operation.

• Turn electrical loads OFF and disconnect from generator

before stopping generator.

Exceeding generators wattage/amperage capacity can

damage generator and/or electrical devices connected

to it.

CAUTION

• When starting engine, pull cord slowly until resistance is felt

and then pull rapidly to avoid kickback.

• NEVER start or stop engine with electrical devices plugged in

and turned on.

Rapid retraction of starter cord (kickback) will

pull hand and arm toward engine faster than

you can let go.

Broken bones, fractures, bruises or sprains could

result.

WARNING

• DO NOT touch hot surfaces.

• Allow equipment to cool before touching.

• The generator must be at least 5 feet from structures having

combustible walls and/or other combustible materials.

• Keep at least 3 feet of clearance on all sides of generator for

adequate cooling, maintenance and servicing.

• In the State of California a spark arrester is required by law

(Section 4442 of the California Public Resources Code). Other

states may have similar laws. Federal laws apply on federal

lands. If you equip the muffler with a spark arrester, it must be

maintained in effective working order.

Running engines produce heat.Temperature of

muffler and nearby areas can reach or exceed

150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush,

ect. can catch fire.

WARNING

Figure 6 — Fuel Shut-off Valve

Fuel Valve is shown

in the “Off” position

Fuel Tank

WheelHouse™ 5500 Watt Generator

Stopping the Engine

1. Turn off and unplug all electrical loads from generator

panel receptacles. NEVER start or stop engine with

electrical devices plugged in and turned on.

2. Let engine run at no–load for 30 seconds to stabilize

internal temperatures of engine and alternator.

3. Turn engine off according to instructions given in

engine owner’s manual.

4. Move fuel valve to “Off” position.

RECEPTACLES

The control panel is equipped with a flip-up panel to keep

the outlets clean and protected.A double pole rocker

switch circuit breaker is provided to protect all the

receptacles and generator against electrical overload.

120 Volt AC, 20 Amp, Duplex

Receptacle

The duplex receptacle (Figure 7) is protected against

overload by a double pole rocker switch circuit breaker.

Use each receptacle to operate 120 Volt AC, single–phase,

60 Hz electrical loads requiring up to 2,400 watts (2.4 kW)

at 20 Amps of current. Use cord sets that are rated for

125 Volt AC loads at 20 Amps (or greater).

120/240 Volt AC, 30 Amp, Locking

Receptacle

Use a NEMA L14–30 plug with this receptacle. Connect a

4–wire cord set rated for 250 Volt AC loads at 30 Amps

(or greater) (Figure 8).You can use the same 4–wire cord if

you plan to run a 120 Volt load.

This receptacle powers 120/240 Volt AC, 60 Hz, single

phase loads requiring up to 2,750 watts of power at

22.9 Amps for 120 Volts; 5,500 watts of power (5.5 kW) at

22.9 Amps for 240 Volts.The outlet is protected by a

double pole rocker switch circuit breaker.

Figure 7 — 120 Volt AC, 20 Amp Duplex Receptacle

Figure 8 — 120/240 Volt AC, 30 Amp Receptacle

4-Wire Cord Set

240V

120V

W (Neutral)

X (Hot)

Y (Hot)

NEMA L14-30

Ground (Green)

• NEVER attempt to power a device requiring more amperage

than generator or receptacle can supply.

• DO NOT overload the generator. See “Don’t Overload

Generator”.

Receptacles may be marked with rating value greater

than generator output capacity.

CAUTION

WheelHouse™ 5500 Watt Generator

DON'T OVERLOAD

GENERATOR

Capacity

You must make sure your generator can supply enough

rated (running) and surge (starting) watts for the items you

will power at the same time. Follow these simple steps:

1. Select the items you will power at the same time.

2. Total the rated (running) watts of these items.This is

the amount of power your generator must produce to

keep your items running. See Figure 9.

3. Estimate how many surge (starting) watts you will

need. Surge wattage is the short burst of power

needed to start electric motor-driven tools or

appliances such as a circular saw or refrigerator.

Because not all motors start at the same time, total

surge watts can be estimated by adding only the

item(s) with the highest additional surge watts to the

total rated watts from step 2.

Example:

Total Rated (Running) Watts = 3075

Highest Additional Surge Watts = 1800

Total Generator Output Required = 4875

Power Management

To prolong the life of your generator and attached devices,

it is important to take care when adding electrical loads to

your generator.There should be nothing connected to the

generator outlets before starting it's engine.The correct

and safe way to manage generator power is to sequentially

add loads as follows:

1. With nothing connected to the generator, start the

engine as described in this manual.

2. Plug in and turn on the first load, preferably the largest

load you have.

3. Permit the generator output to stabilize (engine runs

smoothly and attached device operates properly.

4. Plug in and turn on the next load.

5. Again, permit the generator to stabilize.

6. Repeat steps 4 and 5 for each additional load.

NEVER add more loads than the generator capacity.Take

special care to consider surge loads in generator capacity,

as described above.

*Wattages listed are approximate only. Check tool or

appliance for actual wattage.

Tool or Appliance

Rated (Running)

Watts

Additional Surge

(Starting) Watts

Window Air

Conditioner

1200 1800

Refrigerator 800 1600

Deep Freezer 500 500

Television 500 -

Light (75 Watts) 75 -

3075 Total

Running Watts

1800 Highest

Surge Watts

Tool or Appliance

Rated*

(Running)

Watts

Additional

Surge

(Starting)

Watts

Essentials

Light Bulb - 75 watt 75 -

Deep Freezer 500 500

Sump Pump 800 1200

Refrigerator/Freezer - 18 Cu. Ft. 800 1600

Water Well Pump - 1/3 HP 1000 2000

Heating/Cooling

Window AC - 10,000 BTU 1200 1800

Window Fan 300 600

Furnace Fan Blower - 1/2 HP 800 1300

Kitchen

Microwave Oven - 1000 Watt 1000 -

Coffee Maker 1500 -

Electric Stove - Single Element 1500 -

Hot Plate 2500 -

Family Room

DVD/CD Player 100 -

VCR 100 -

Stereo Receiver 450 -

Color Television - 27” 500 -

Personal Computer w/17” monitor 800 -

Other

Security System 180 -

AM/FM Clock Radio 300 -

Garage Door Opener - 1/2 HP 480 520

Electric Water Heater - 40 Gallon 4000 -

DIY/Job Site

Quartz Halogen Work Light 1000

Airless Sprayer - 1/3 HP 600 1200

Reciprocating Saw 960 960

Electric Drill - 1/2 HP 1000 1000

Circular Saw - 7 1/4” 1500 1500

Miter Saw - 10” 1800 1800

Table Planer - 6” 1800 1800

Table Saw/Radial Arm Saw - 10” 2000 2000

Air Compressor - 1-1/2 HP 2500 2500

Figure 9 - Wattage Reference Chart

WheelHouse™ 5500 Watt Generator

SPECIFICATIONS

Starting Wattage . . . . . . . . . . . . . . . . . . . . . . . . .8,500 watts

Wattage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5,500 watts

AC Load Current:

At 120 Volts . . . . . . . . . . . . . . . . . . . . . . . . . . . .45.8 Amps

At 240 Volts . . . . . . . . . . . . . . . . . . . . . . . . . . . .22.9 Amps

Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–phase

Rated Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Hertz

Fuel Tank Capacity . . . . . . . . . . . . . . . . . . . . . .5 U.S. gallons

Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .170 lbs.

GENERAL MAINTENANCE

RECOMMENDATIONS

The Owner/Operator is responsible for making sure that

all periodic maintenance tasks are completed on a timely

basis; that all discrepancies are corrected; and that the unit

is kept clean and properly stored. NEVER operate a

damaged or defective generator.

NOTE: Should you have questions about replacing

components on your Generac Portable Products generator,

please call 1-800-270-1408 for assistance.

Engine Maintenance

See engine owner’s manual for instructions.

KEEP OUT OF REACH OF CHILDREN. DON'T

POLLUTE. CONSERVE RESOURCES. RETURN

USED OIL TO COLLECTION CENTERS.

Generator Maintenance

Generator maintenance consists of keeping the unit clean

and dry. Operate and store the unit in a clean dry

environment where it will not be exposed to excessive

dust, dirt, moisture or any corrosive vapors. Cooling air

slots in the generator must not become clogged with

snow, leaves or any other foreign material.

NOTE: DO NOT use a garden hose to clean generator.

Water can enter engine fuel system and cause problems. In

addition, if water enters generator through cooling air

slots, some of the water will be retained in voids and

cracks of the rotor and stator winding insulation.Water

and dirt buildup on the generator internal windings will

eventually decrease the insulation resistance of these

windings.

Generator Cleaning

• Use a damp cloth to wipe exterior surfaces clean.

• Use a soft bristle brush to loosen caked on dirt or oil.

• Use a vacuum cleaner to pick up loose dirt and debris.

• Use low pressure air (not to exceed 25 psi) to blow

away dirt. Inspect cooling air slots and opening on

generator.These openings must be kept clean and

unobstructed.

• Used motor oil has been shown to cause skin cancer in

certain laboratory animals.

• Thoroughly wash exposed areas with soap and water.

Avoid prolonged or repeated skin contact with used

motor oil.

CAUTION

• DO NOT expose generator to excessive moisture, dust, dirt,

or corrosive vapors.

• DO NOT insert any objects through cooling slots.

Improper treatment of generator can damage it and

shorten its life.

CAUTION

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR

GENERATOR

• Disconnect the spark plug wire from the spark plug and place

the wire where it cannot contact spark plug.

Unintentional sparking can result in fire or

electric shock.

WARNING

WheelHouse™ 5500 Watt Generator

STORAGE

The generator should be started at least once every seven

days and allowed to run at least 30 minutes. If this cannot

be done and you must store the unit for more than

30 days, use the following guidelines to prepare it for

storage.

Generator Storage

• Clean the generator as outlined in “Generator Cleaning”.

• Check that cooling air slots and openings on generator

are open and unobstructed.

Engine Storage

See engine owner’s manual for instructions.

Other Storage Tips

• Always store unit with fuel shut off valve in the “Off”

position (Figure 6, earlier).

• To prevent gum from forming in fuel system or on

essential carburetor parts, empty entire contents of both

supplied fuel stabilizer containers into fuel tank and fill

with fresh fuel. Run the unit for several minutes to

circulate the additive through the carburetor.The unit

and fuel can then be stored for up to 24 months.

Additional fuel stabilizer can be purchased locally.

• Fuel tank may swell in storage if vent is closed.When

storing generator with fuel in the tank, make sure the

vent knob is turned fully counter-clockwise.

• Store unit in clean and dry area.

• DO NOT place a storage cover over a hot generator.

• Let equipment cool for a sufficient time before placing the

cover on the equipment.

Storage covers can be flammable.

WARNING

WheelHouse™ 5500 Watt Generator

TROUBLESHOOTING

Problem Cause Solution

Generator is running, but no AC

output is available.

1. Circuit breaker is open.

2. Poor connection or defective cord

set.

3. Connected device is bad.

4. Fault in generator.

1. Reset circuit breaker.

2. Check and repair.

3. Connect another device that is in

good condition.

4. Contact authorized service facility.

Generator runs good but bogs

down when loads are connected.

1. Short circuit in a connected load.

2. Generator is overloaded.

3. Shorted generator circuit.

1. Disconnect shorted electrical load.

2. See "Don't Overload Generator".

3. Contact authorized service facility.

Generator will not start; or starts

and runs rough.

1. Fuel valve is in the "Off" position.

2. Vent knob in fuel gauge is closed.

3. Low oil level.

1. Turn fuel valve to the "On"

position.

2. Open vent knob in fuel gauge.

3. Fill crankcase to proper level or

place generator on level surface.

Generator shuts down during

operation.

1. Out of gasoline.

2. Low oil level.

1. Fill fuel tank.

2. Fill crankcase to proper level or

place generator on level surface.

Generator lacks power.

Load is too high. See "Don't Overload Generator".

GENERAC PORTABLE PRODUCTS OWNER EQUIPMENT WARRANTY POLICY

Effective November 1, 2004

WARRANTY PERIOD*

* The warranty period begins on the date of purchase by the first retail consumer or commercial end user, and continues for the

period of time stated in the table above. "Consumer use" means personal residential household use by a retail consumer.

"Commercial use" means all other uses, including use for commercial, income producing or rental purposes. Once equipment has

been used commercially, it shall thereafter be considered to be in commercial use for purposes of this warranty.

** The engine and starting batteries are warranted solely by the manufacturers of those products.

WARRANTY REGISTRATION IS NOT NECESSARY TO OBTAIN WARRANTY ON BRIGGS & STRATTON POWER

PRODUCTS EQUIPMENT.SAVE YOUR PROOF OF PURCHASE RECEIPT. IF YOU DO NOT PROVIDE PROOF OF THE

INITIAL PURCHASE DATE AT THE TIME WARRANTY SERVICE IS REQUESTED,THE MANUFACTURING DATE OF THE

EQUIPMENT WILL BE USED TO DETERMINE THE WARRANTY PERIOD.

About your equipment warranty:

We welcome warranty repair and apologize to you for being inconvenienced.Any Authorized service dealer may perform warranty

repairs. Most warranty repairs are handled routinely, but sometimes requests for warranty service may not be appropriate. For

example, warranty service would not apply if equipment damage occurred because of misuse, lack of routine maintenance, shipping,

handling, warehousing or improper installation. Similarly, the warranty is void if the manufacturing date or the serial number on the

equipment has been removed or the equipment has been altered or modified. During the warranty period, the Authorized service

dealer, at its option, will repair or replace any part that, upon examination, is found to be defective under normal use and service.This

warranty will not cover following repairs and equipment:

• Normal Wear: Outdoor power equipment, like all mechanical devices, needs periodic parts, service and replacement to perform

well.This warranty does not cover repair when normal use has exhausted the life of a part or the equipment.

• Installation and Maintenance: This warranty does not apply to equipment or parts that have been subjected to improper or

unauthorized installation or alteration and modification, misuse, negligence, accident, overloading, overspeeding, improper

maintenance, repair or storage so as, in our judgment, to adversely affect its performance and reliability.This warranty also does not

cover normal maintenance such as adjustments, fuel system cleaning and obstruction (due to chemical, dirt, carbon or lime, etc.).

• Other Exclusions: Also excluded from this warranty are wear items such as quick couplers, oil gauges, belts, o-rings, filters,

pump packing, etc., pumps which have been run without water supplied or damage or malfunctions resulting from accidents,

abuse, modifications, alterations, or improper servicing or freezing or chemical deterioration.Accessory parts such as guns,

hoses, wands and nozzles are excluded from the product warranty.This warranty excludes failures due to acts of God and other

force majeure events beyond the manufacturers control.Also excluded is used, reconditioned, and demonstration equipment;

equipment used for prime power in place of utility power and equipment used in life support applications.

BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC

JEFFERSON,WISCONSIN, U.S.A.

LIMITED WARRANTY

"Generac Portable Products is a licensed trademark of Briggs & Stratton Power Products. Briggs & Stratton Power Products will

repair or replace, free of charge, any part, or parts of the equipment** that are defective in material or workmanship or both.

Transportation charges on parts submitted for repair or replacement under this warranty must be borne by purchaser.This

warranty is effective for the time periods and subject to the conditions provided for in this policy. For warranty service, find your

nearest Authorized service dealer by calling 1-800-270-1408.Warranty service may only be performed by a Briggs & Stratton

Power Products Authorized service dealer.

THERE IS NO OTHER EXPRESS WARRANTY. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE,ARE LIMITED TO THE TIME PERIOD SPECIFIED, OR TO THE EXTENT PERMITTED

BY LAW.ANY AND ALL IMPLIED WARRANTIES ARE EXCLUDED. LIABILITY FOR CONSEQUENTIAL DAMAGES UNDER

ANY AND ALL WARRANTIES ARE EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY LAW. Some countries or

states do not allow limitations on how long an implied warranty lasts, and some countries or states do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you.This warranty gives

you specific legal rights and you may also have other rights that vary from country to country or state to state.”

PRODUCTS** CONSUMER USE COMMERCIAL USE

Pressure Washer 1 year 90 days

Portable Generator 2 years (2nd year parts only) 1 year

WheelHouse™ 5500 Watt Générateur

TABLE DES MATIÈRES

Règles de Sécurité. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-18

Connaissez Votre Générateur . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Assemblage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21

Opération . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-25

Caractéristiques du Produit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Entretien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Rangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Dépannage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

DESCRIPTION DE L ÉQUIPEMENT

Lisez avec soin ce manuel et familiarisez-vous avec

votre générateur. Connaissez ses applications, ses

limitations et les dangers qu'il implique.

Ce générateur est un générateur entraîné par un moteur à champ

magnétique rotatif produisant du courant alternatif (c.a.). Il a été

conçu pour fournir du courant électrique pour faire marcher des

charges compatibles d'éclairage, d'appareils ménagers, d'outil et de

moteur. Le champ tournant du générateur est entraîné à

3,600 T/M par un moteur seul cylindrique.

ATTENTION! NE PAS dépasser la capacité en watts ou en

Ampères du générateur.Voir "Ne Pas Surcharger Générateur"

pour l'information spécifique.

Tout a été mis en oeuvre pour que les informations contenues

dans ce manuel soient exactes et à jour. Cependant, nous se

réserve le droit de changer, d'altérer ou d'améliorer le produit à

n'importe quel moment sans avis préalable.

Le Système de contrôle de l'émission du générateur est garanti

pour des normes établies par L'Agence de protection de

l'environnement. Pour des informations sur la garantie, se reporter

au manuel du moteur.

RÈGLES DE SÉCURITÉ

Ceci est la sûreté le symbole vif. Il est utilisé pour

vous alerter aux dangers de blessure personnels

potentiels. Obéir tous messages de sûreté qui suivent

ce symbole éviter la blessure ou la mort possibles.

Le symbole indiquant un message de sécurité est accompagné d'un

mot indicateur (DANGER,ATTENTION,AVERTISSEMENT), d'un

message illustré et/ou d'un message de sécurité visant à vous

avertir des dangers. DANGER indique un danger qui, s'il n'est pas

évité, provoquera des blessures graves, voire fatales.

AVERTISSEMENT indique un danger qui, s'il n'est pas évité, peut

provoquer des blessures graves, voire fatales. ATTENTION

indique un danger qui, s'il n'est pas évité, peut provoquer des

blessures mineures ou légères. Le mot ATTENTION, lorsqu'il est

utilisé sans le symbole d'alerte, indique une situation pouvant

endommager l'équipement. Suivez les messages de sécurité pour

éviter ou réduire les risques de blessures ou de mort.

Symboles de Danger et Moyens

L’échappement du moteur de ce produit contient des produits

chimiques que l’État de Californie considère comme causant le

cancer, des déformations à la naissance ou d’autres dangers

concernant la reproduction.

AVERTISSEMENT

Feu

Explosion

Emanations Toxiques

Surface Chaude

Électrocution

Choc Électrique

Recul

VEUILLEZ CONSERVER CES INSTRUCTIONS

WheelHouse™ 5500 Watt Générateur

• Faites fonctionner le générateur SEULEMENT à l'extérieur.

• Évitez que les gaz d'échappement entrent dans un espace restreint,

par une fenêtre, une porte, une prise d'aération ou toute autre

ouverture.

• NE FAITES PAS fonctionner le générateur à l'intérieur d'un bâtiment

ou d'un abri, y compris à l'intérieur du compartiment d'un véhicule de

plaisance.

Le générateur, lorsqu'il fonctionne, produit du monoxyde

de carbone, un gaz toxique inodore et incolore.

Le fait de respirer du monoxyde de carbone provoque

des nausées, des évanouissements ou peut être fatal.

AVERTISSEMENT

• Lorsque vous utilisez le générateur comme source d'énergie de

secours, il est nécessaire d'aviser les services publics d'électricité.

• Utilisez un disjoncteur différentiel lorsque vous utilisez l'appareil dans

des endroits humides ou extrêmement conductibles, comme les

terrasses en métal ou les ouvrages métalliques.

• NE touchez pas les fils dénudés ou les boîtiers.

• N'UTILISEZ pas le générateur avec des cordons électriques usés,

effilochés ou dénudés, ou abîmés de quelque sorte que ce soit.

• N'UTILISEZ pas le générateur sous la pluie.

• NE manipulez pas le générateur ou les cordons d'alimentation lorsque

vous êtes debout dans l'eau, pieds nus ou avec les mains ou les pieds

humides.

• NE laissez pas des personnes non qualifiées ou des enfants se servir

ou réparer le générateur.

Le générateur produit une tension élevée.

NE PAS isoler le générateur de l'installation électrique

risque de provoquer des blessures ou même d'être fatal

pour les ouvriers électriciens et de causer des dommages

au générateur dus à un "backfeed" d'énergie électrique.

AVERTISSEMENT

• Cette génératrice ne satisfait pas aux normes U. S. Coast Guard

Regulation 33CFR-183 et ne doit pas être utilisée pour des

applications marines.

• L'omission d'utiliser une génératrice appropriée et approuvée par U. S.

Coast Guard pourrait entraîner des blessures corporelles ou des

dommages matériels.

AVERTISSEMENT

LORS DE L'AJOUT OU DE LA VIDANGE DU

CARBURANT

• Éteignez le générateur et laissez-le refroidir au moins 2 minutes avant

de retirer le capuchon du réservoir de carburant. Desserrez lentement

le capuchon pour laisser la pression s'échapper du réservoir.

• Remplissez ou vidangez le réservoir d'essence à l'extérieur.

• NE REMPLISSEZ PAS trop le réservoir. Laissez l'expansion de

l'essence.

• Éloignez l'essence des étincelles, des flammes, des veilleuses, de la

chaleur et de toute autre source d'inflammation.

• N'ALLUMEZ PAS de cigarette ou ne fumez pas à proximité de l'appareil.

LORS DU DÉMARRAGE DE L'ÉQUIPEMENT

• Assurez-vous que la bougie d'allumage, le silencieux, le bouchon à

essence et le filtre à air sont en place.

• NE démarrez PAS le moteur lorsque la bougie d'allumage est enlevée.

• Si du carburant est renversé, attendez qu'il s'évapore avant de

démarrer le moteur.

LORSQUE L'ÉQUIPEMENT FONCTIONNE

• NE penchez PAS le moteur ou l'équipement, vous risqueriez de

renverser de l'essence.

• Cette génératrice n'est pas conçue pour être utilisée dans de

l'équipement mobile ou les applications marines.

LORSQUE VOUS TRANSPORTEZ OU RÉPAREZ

L'ÉQUIPEMENT

• Le réservoir d'essence doit être VIDE ou le robinet d'arrêt de

carburant doit être à la position fermée (OFF) pendant le transport

ou la réparation.

• Débranchez le câble de bougie.

LORSQUE VOUS ENTREPOSEZ L'ESSENCE OU UN

ÉQUIPEMENT AVEC UN RÉSERVOIR À ESSENCE

• Entreposez-le loin des appareils de chauffage, des fours, des chauffe-

eau, des sécheuses ou de tout autre appareil électroménager

disposant d'une veilleuse ou de toute autre source d'inflammation

risquant d'enflammer les vapeurs d'essence.

L'essence et ses vapeurs sont extrêmement

inflammables et explosives.

Le feu ou l'explosion risque de provoquer des

blessures graves, pouvant être fatales.

AVERTISSEMENT

WheelHouse™ 5500 Watt Générateur

• NE TRAFIQUEZ PAS la vitesse régulée. Le générateur produit une

fréquence nominale et une tension correctes lorsqu'il fonctionne à

une vitesse régulée.

• NE modifiez le générateur d'aucune façon.

Les vitesses de fonctionnement excessivement élevées

augmentent les risques de blessure ou risquent d'endommager

le générateur.

Les vitesses extrêmement lentes entraînent une charge importante.

ATTENTION

• Voir la section " Ne Pas Surcharger Générateur ".

• Démarrez le générateur et laissez le moteur se stabiliser avant de

brancher les charges électriques.

• Branchez les charges électriques en position ARRÊT, puis, remettez en

position MARCHE.

• Éteignez les charges électriques et débranchez-les du générateur avant

de l'arrêter.

Dépasser la capacité de puissance ou d'ampérage du

générateur risque d'endommager ce dernier et/ou les autres

appareils électriques qui y sont branchés.

ATTENTION

• NE vous servez du générateur que pour les utilisations prévues.

• Si vous avez des questions concernant les utilisations prévues,

demandez à votre distributeur ou appelez 1-800-270-1408.

• Ne faites fonctionner le générateur que sur des surfaces horizontales.

• N'EXPOSEZ pas le générateur à une humidité excessive, à de la

poussière, à de la saleté ou à des vapeurs corrosives.

• N'INSÉREZ aucun objet dans les fentes de refroidissement.

• Si les appareils branchés sont en surchauffe, éteignez-les et

débranchez-les du générateur.

• Arrêtez le générateur si :

-la puissance électrique est inexistante;

-l'équipement produit des étincelles, de la fumée ou des flammes;

-l'unité vibre excessivement.

Un traitement inapproprié du générateur risque de

l'endommager et de raccourcir sa durée d'utilisation.

ATTENTION

LORSQUE VOUS RÉGLEZ OU RÉPAREZ VOTRE

GÉNÉRATEUR

• Débranchez toujours le câble de bougie et placez-le de façon à ce

qu'il ne soit pas en contact avec la bougie.

LORS DE TESTS D'ALLUMAGE DU MOTEUR

• Utilisez un vérificateur de bougies d'allumage approuvé.

• NE vérifiez PAS l'allumage lorsque la bougie d'allumage est enlevée.

Unintentional peut résulter dans feu ou électrique.

AVERTISSEMENT

• NE TOUCHEZ PAS les surfaces chaudes.

• Laissez l'équipement refroidir avant de le toucher.

• La génératrice ne doit pas se trouver à moins de 152,4 cm (5 pi) de

toute structure comportant des murs combustibles et/ou les autres

matériels combustibles.

• Laissez un dégagement d'au moins 1 m (3 pi) tout autour de l'enceinte

de la génératrice pour permettre une ventilation adéquate et un

espace suffisant pour sa maintenance et son entretien.

• Dans l'état de Californie un pare-étincelles est requis par la loi

(section 4442 du Code des ressources publiques de Californie).

D'autres états ont des lois similaires. Les lois fédérales s'appliquent

aux terres fédérales. Si vous équipez le silencieux d'un pare-étincelles,

il doit être en bon état de fonctionnement.

Les moteurs en fonctionnement produisent de la chaleur.

La température du silencieux et des endroits à proximité

peuvent atteindre, voire dépasser 150°F (65°C).

Le contact de ces pièces risque de causer de graves brûlures.

Des débris dans le combustible tels que feuilles, gazon,

broussailles,etc. peuvent s'enflammer.

AVERTISSEMENT

• Lors du démarrage du moteur, tirez lentement sur la corde jusqu'à ce

que vous sentiez une résistance et tirez alors rapidement afin d'éviter

un effet de recul.

• NE démarrez JAMAIS ni n'arrêtez jamais le moteur alors que des

appareils électriques y sont branchés et en fonction.

Une rétroaction rapide de la corde du démarreur

(effet de recul) tirera votre main et votre bras vers le

moteur plus rapidement que vous ne pouvez relâcher

la corde.

Vous risquez ainsi de subir des fractures, des

ecchymoses ou des entorses.

AVERTISSEMENT

WheelHouse™ 5500 Watt Générateur

CONNAISSEZ VOTRE GÉNÉRATEUR

Lire ce manuel de l'utilisateur et les régles de sécurité avant de faire marcher votre générateur.

Comparez les illustrations avec votre générateur pour vous familiariser avec l'emplacement des diverses commandes et réglages. Gardez

ce manuel pour le consulter plus tard.

Bouchon/repère de remplissage d'huile - Ajoutez de l'huile

au moteur à cet endroit.

Commutateur à bascule - Placez ce commutateur sur la

position “On” (Marche) avant d'utiliser le démarrage à recul. Placez

le commutateur sur “Off” (Arrêt) pour ARRÊTER le moteur.

Démarrage à recul - Utilisé pour démarrer le moteur manuellement.

Disjoncteur bipolaire (C.A.) - Un disjoncteur bipolaire est

fourni afin de protéger toutes les prises et la génératrice contre

les surtensions.

Filtre à air – Utilise un élément de filtre du type sec et un pré-

filtre en mousse pour limiter le montant de saleté et de

poussières entrant dans le moteur.

Interrupteur de starter – Utilisé lorsque vous faites un

démarrage à froid du moteur.

Prises de courant double de 120 Volts c.a., 20 Ampères -

peuvent être utilisées pour fournir l'alimentation électrique de

l'éclairage, des électroménagers, des outils ou des moteurs de

120 Volts, 20 Ampères, monophasés, 60 Hz.

Prise de 120/240 Volts c.a., 30 Ampères – Peut être utilisée

pour fournir du courant électrique pour faire marcher des

systèmes d’éclairage, des appareils, des outils ou des moteurs

nécessitant 120 Volts et/ou 240 Volts c.a., 30 Ampères,

monophasés, 60 Hertz.

Réservoir d'essence - Réservoir d'une capacité de 18,9 litres

(5 gallons US).

Vis-papillon de terre – Si a exigé, veuillez consulter un

électricien qualifié, un inspecteur en électricité ou l'agence

compétente de votre région.

Prise de courant double

de120 Volts c.a., 20 Ampères

Réservoir d'essence

Interrupteur de starter

Démarrage à recul

Commutateur à Bascule

Prise de 120/240 Volts,

30 Ampères, c.a.

Filtre à air

Vis-papillon de terre

Bouchon/repère de

remplissage d'huile

Disjoncteur bipolaire (c.a.)

WheelHouse™ 5500 Watt Générateur

ASSEMBLAGE

Votre générateur exige que quelque assemblée et soit prêt pour

l'usage après il a été convenablement entretenu avec le pétrole et

le carburant recommandés. Si vous avez n'importe quels

problèmes avec l'assemblée de votre générateur, s'il vous plaît

appeler le helpline de générateur à 1-800-270-1408.

Enlever le Générateur de la Boite

1. Régler la boîte sur une surface plate rigide avec “This Side

Up” flèches qui indiquent ascendantes.

2. Soigneusement ouvrir les premiers rabats de la boîte qui

expédie.

3. Abattre des coins à une fin de boîte et plie d'haut en bas ce

côté de boîte en bas plat.

4. Enlever tout matériel qui emballe, fillers de boîte, etc.

5. Enlever le générateur de la boîte qui expédie.

Les Contenus De Boîte

Vérifient tous contenus.

• Le générateur

• Le poignée

• Prise de verrouillage 30 Ampères

• Huile moteur

• Deux paquets de stabilisateur d'essence

• Contrôler le matériel d'attachement

• Manuel de l'utilisateur

• Manuel du moteur

Si certaines pièces sont manquantes ou endommagées, appelez le

1-800-270-1408.

Fixez la Poignée à l'Appareil Principal

1. Placez la poignée sur le support déjà raccordé à l'appareil

principal.Assurez-vous que les trous de la poignée sont

alignés avec les trous du support (Figure 10).

REMARQUE: Il peut être nécessaire de déplacer les supports de

la poignée d'un côté à l'autre afin d'aligner la poignée et de la faire

glisser sur les supports.

2. Insérez le boulon dans le trou du côté droit de la poignée

(en regardant l'arrière de l'appareil) et fixez le bouton en

plastique (Figure 11).Vissez le bouton manuellement.

Alignés

Trous

Poignée

Support de

la Poignée

Figure 10 - Fixez la Poignée à l’Base

Figure 11 - Assuré la Poignée

La page charge ...

Simplicity 01655-2 Manuel utilisateur

Marque: Simplicity

Modèle: 01655-2

Catégorie: Accessoires pour véhicules automobiles

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Simplicity 01655-2 User manual

Simplicity 01655-2 Manuel utilisateur

Simplicity 01655-2 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents