Sharp 32U-S50B Manuel utilisateur

Catégorie
Téléviseurs CRT
Taper
Manuel utilisateur
1
COLOR TELEVISION
H OPERATION MANUAL H
MODEL
32U-S50B
A
s an
E
NERGY
S
TAR
®
P
artner, SHARP has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
E
NERGY
S
TA R
®
is a
U.S.
registered
trademark.
CONTENTS
PAGE
IMPORTANT INFORMATION/IMPORTANT
SAFEGUARDS .................................................... 2–4
Supplied Accessories ............................................... 5
Before Operating Your Television .............................. 5
Antenna Connections ........................................... 5, 6
Quick Reference Control Operation ......................... 7
EZ SETUP during First Use ..................................... 8
Demo Mode .............................................................. 9
Accessing the MAIN MENU screen without
Remote Control ........................................................ 9
Language ............................................................... 10
Sleep Timer ............................................................ 10
Video Adjust ........................................................... 11
Audio Select ..................................................... 12, 13
MTS (Multichannel TV Sound) ............................ 12
AUDIO ADJUST ................................................. 13
This operation manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 37–41.
FRENCH is on page 42–46.
PAGE
Closed Caption ....................................................... 14
Parent Control .................................................. 15–25
V-CHIP Operation ......................................... 15–22
VIEW TIMER ................................................ 23–25
Energy Save ........................................................... 26
Set Up .............................................................. 27–31
EZ Setup ............................................................. 27
Channel Setting ............................................ 28–30
Blue Screen .................................................. 30, 31
Auto Input ............................................................... 32
Using the Video and Audio Input Terminals ...... 33, 34
Before Calling for Service ....................................... 35
Calling for Service .................................................. 35
Specifications ......................................................... 36
Limited Warranty .................................................... 47
A542 WJ
2
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
Model No.:
Serial No.:
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
IMPORTANT INFORMATION
There are two important reasons for prompt warranty registration of your new SHARP television set. Use
the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
WHAT IS ENERGY STAR
®
TVs and VCRs use energy both when they are on and when they are off. Americans spend more than $1
billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY
STAR
®
models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than
$500 million a year in energy savings for consumers.
The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution
that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY
STAR
®
models, it would reduce carbon dioxide emissions by five million tons every year — equivalent to
eliminating the pollution from more than one million cars.
By using ENERGY STAR
®
products, you will save money on your electric bills and use less energy. That
makes good economic sense and it’s good for our environment.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
Note to CATV system installer: This reminder is provided to call the CATV system installers attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
3
IMPORTANT INFORMATION (Continued)
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the users authority to operate this
equipment.
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries Alliance:
www.eiae.org
CAUTION: Do not place the AC power cord under the TV set or other heavy items.
CAUTION: Please read all of these instructions before you operate your television and save
these instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4. Do not use this television equipment near water for example, near a bath tub, washbowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7. Wall or shelf mounting should follow the manufacturers instructions, and should use a
mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
insure reliable operation of the television equipment and to protect it from overheating, these openings must
not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a
bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat
this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
IMPORTANT SAFEGUARDS
4
IMPORTANT SAFEGUARDS (Continued)
13. Follow all warnings and instructions marked on the television equipment.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the
National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
15. For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance this indicates a need for
service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NECNATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
5
TV
Supplied Accessories
Size AA
Dry Batteries
Infrared Remote Control
RRMCG1324CESA
Note:
Location
For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are
unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
If the set is not going to be used for a long period, such as during a vacation, unplug the set from the
wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the
radio.
If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Inserting the batteries
With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two
batteries (size “AA”). Be sure to match the battery m/, terminals with the m/, marks inside the
compartment.
Before Operating Your Television
Battery
Cover
Pull up
Antennas
The antenna requirements for good color television reception are more important than those for black
& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
Antenna Connections
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
1. A 75-ohm system is generally a round cable with
F-type connector that can easily be attached to
a terminal without tools (not supplied).
2. A 300-ohm system is a flat “twin-lead” cable that
can be attached to a 75-ohm terminal through a
300/75-ohm ADAPTOR (not supplied).
6
CABLE TV (CATV) CONNECTION
A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by
the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s
channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
Note:
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
OUTDOOR ANTENNA CONNECTION
Refer to one of the following two diagrams when connecting to an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.
REAR OF TV
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
(Not supplied)
or
A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna
Antenna Connections (Continued)
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
REAR OF TV
OUT
A
IN
B
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
F-type connector
75-ohm coaxial cable
When connecting the RF cable to the TV set, do not
tighten F-type connector with tools.
If tools are used, it may cause damage to your TV
set.
(The breaking of internal circuit, etc.)
F-type connector should be finger-tightened only.NOTICE
7
Quick Reference Control Operation
Part Names
Front Panel
Quick Reference Control Operation
IN 2
TV
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
Changes or selects the TV
adjustments on On-Screen Displey.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
4 seconds.
Press again Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
See pages 28–30 for Channel
Setting.
• Moves the E ” mark on the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
When sound is muted, CLOSED
CAPTION appears if available.
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
VIDEO/AUDIO TERMINALS
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
REMOTE CONTROL
SENSOR
POWER
Press On.
Press again Off.
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
INPUT
Press Switches to external video
INPUT 1 mode.
Press twice Switches to external video
INPUT 2 mode.
Press 3 times Switches back to the
original TV mode. See page 34.
8
When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before pressing the
POWER button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See pages 5, 6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE screen will be
displayed.
2 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”.
3 Press VOL k/l to access the EZ SETUP screen.
4 Press VOL k.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press VOL l and it will be canceled.
If you want to SET UP again, please refer to page
27 on SET UP.
To cancel EZ SETUP
Press VOL l.
5 Once EZ SETUP is complete, the lowest channel number
memorized will be displayed.
Note:
If EZ SETUP does not memorize all the channels in your region, please refer to pages 28–30 for
more information on manually memorizing the channels using CHANNEL SETTING.
It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occurring around the area. Please refer to pages 28–30 for more
information on manually memorizing the channels using CHANNEL SETTING.
SELECT
ENGL I SH
FRANCA I S
SELECT : CH
SET : VOL
+
/
/
ESPAÑOL
LANGUAGE
SELECT
ENGL I SH
FRANCA I S
SELECT : CH
SET : VOL
+
/
/
ESPAÑOL
LANGUAGE
START
STOP START
SETUP?EZ
OR CAB L E.CONNECT ANT ENNA
STOP START
PLEASE WA I T
125
AUTO PROGRAMM I NG
2
POWER
(EZ SETUP screen)
EZ SETUP during First Use
(On the Set)
(On the Remote Control)
(SELECT LANGUAGE screen)
(START)
(STOP)
POWER
CHANNEL
UP (a)/
DOWN (s)
VOLUME
(
k
)/(
l
)
9
Demo Mode
To learn more about the TV set, you can enter DEMO mode. Simply
press and hold MENU on the TV set for more than 3 seconds.
To cancel DEMO mode, again press MENU on the TV set.
Example:
DEMO mode display
Accessing the MAIN MENU screen without Remote Control
If you misplaced your Remote Control you can still access most settings
via the MAIN MENU screen by pressing MENU on the TV set.
Some features of your TV set are not accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service
Center for a replacement.
(On the Set)
(On the Set)
MENU
button
MENU
button
10
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s
to move the “E mark to “SET UP”.
3 Press VOL k/l to access the SET UP screen, then press CH a/s
to move the E” mark to “LANGUAGE”.
4 Press VOL k/l to access the LANGUAGE select screen.
5 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”.
6 Press MENU to exit.
Sleep Timer
You can preset your television to turn off automatically in increments of 30, 60, 90, or 120 minutes.
1 Press MENU to access the MAIN MENU screen.
2 Press VOL k/l to access the SLEEP TIMER screen.
3 Press VOL k/l to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press MENU to exit.
Note:
To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”
during step 3.
While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER
turns off the TV, the screen prompts the time remaining for 4 seconds. The SLEEP TIMER shows a
similar display for each remaining minute and a 10-second display right before shutting off the TV.
If you turn the POWER OFF, the SLEEP TIMER will automatically reset.
Language
(SLEEP TIMER screen)
(LANGUAGE select screen)
(MAIN MENU screen)
(SET UP screen)
SLEEP T I MER
AUDI O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJUST
MENU
CC
ES
SLEEP T I MER
AUDI O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJUST
MENU
CC
ES
SLEEP T I MER
AUDI O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJUST
MENU
CC
ES
ENGL I SH
FRANCA I S
ESPAÑOL
LANGUAGE
ENGL I SH
FRANCA I S
ESPAÑOL
IDIOMA
SLEEP T IMER
120M REMAIN
BLUE SCREEN
LANGUAGE
CH SETT ING
SET UP
AUTO I NPUT
11
Description of Adjustment Items
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s
to move the E mark to VIDEO ADJUST.
3 Press VOL k/l to access the PICTURE adjust screen.
4 Press CH a/s
to select the desired adjustment item. (Refer to the
diagram below.)
5 Press VOL k/l to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press MENU to exit.
Note:
VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1 and INPUT 2 modes.
(PICTURE adjust screen)
VOL k
increases contrast
VOL l
decreases contrast
(MAIN MENU screen)
Video Adjust
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
PICTURE
TINT
COLOR
SHARP
COLOR TEMP.
RESET
: CH s
: CH a
BRIGHT
PICTURE 50
PICTURE 50
SLEEP T I MER
AUDI O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJUST
MENU
CC
ES
Selected item VOL
k
button VOL
l
button
PICTURE To increase contrast To decrease contrast
TINT To make skin tones greenish To make skin tones purplish
COLOR To increase color intensity To decrease color intensity
BRIGHT To increase brightness To decrease brightness
SHARP To increase sharpness To decrease sharpness
COLOR TEMP. To choose a LOW, ML, MH or HIGH color tone.
RESET To return all adjustments to factory preset levels.
12
H MTS (Multichannel TV Sound)
This function allows reception of stereo or bilingual TV sound.
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
Stereo broadcasts
Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo sound.
SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
If stereo sound is difficult to hear.
You can obtain clearer sound by manually switching to fixed monaural mode.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s
to move the “E mark to “AUDIO SELECT”.
3 Press VOL k/l
to access the AUDIO SELECT screen.
4 Press CH a/s
to move the “E” mark to “MTS” or “AUDIO
ADJUST”.
5 Press VOL k/l
to select “STEREO”, “SAP” or “MONO” when the
E mark is at “MTS” position.
Audio Select
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJUST
MENU
CC
ES
AU I ODSEECTL
MTS
:STEREO
AUD I DJ USTOA
AU I ODSEECTL
MTS
:STEREO
AUD I DJ USTOA
(MAIN MENU screen)
(AUDIO SELECT screen)
(AUDIO SELECT
screen
)
MTS
STEREO
SAP
MONO
13
H AUDIO ADJUST
When the E mark is at AUDIO ADJUST, press VOL k/l to
access the AUDIO ADJUST screen. To access the desired item,
press CH a/s. To adjust the audio setting, press VOL k/l.
6 Press MENU to exit.
An example screen displaying ON AIR when receiving STEREO broadcasts
Current channel number
ON AIR will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
Note:
Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
Selecting MTS while receiving video signals from INPUT terminals does not change the type of
sound; in this case, sound is determined by the video source.
Audio Select (Continued)
21
STEREO
SAP
ON
ON
AIR
AIR
MONO
(CHANNEL call on screen)
TREBLE
RESET
BASS
BALANCE
Selected item VOL k button VOL l button
TREBLE To increase treble response. To decrease treble response.
BASS To increase bass response. To decrease bass response.
BALANCE To emphasize the right To emphasize the left
speakers volume. speakers volume.
RESET To return all adjustments to factory preset levels.
TREBL E 0
14
How to set CLOSED CAPTION
Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows conversations, narration, and sound
effects in TV programs and home videos to appear as captions on the
TV screen (see the illustration).
Not all the programs and videos will offer closed captioning. Please
look for the “ ” symbol to ensure that captions will be shown.
Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2.
The CAPTION mode shows subscripts of dialogs and commentaries
of TV dramas and news programs while allowing clear view of the
picture.
The TEXT mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s
to move the E mark to CLOSED CAPTION.
3 Press VOL k/l to access the CLOSED CAPTION setting screen.
4 Press CH a/s
to move the E mark to either MODE or DATA.
5 Press VOL k/l to change the CLOSED CAPTION setting.
6 Press MENU to exit.
Note:
If a broadcast contains CLOSED CAPTION and the MUTE button is pressed, the set enters CAPTION
mode automatically. Pressing MUTE again will return the set to its previous condition.
Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your TV.
If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become
dark and blank for some programs. Should this occur, switch the Closed Caption mode to OFF.
CLOSED
MODE
CAPT I ON
: CAPT I ON
DATA
: CH 1
CC
DATA :CH 1
:CAPT I ONMODE
CLOSED CAPT ION
CC
CLOSED
MODE
CAPT I ON
: CAPT I ON
DATA
: CH 1
CC
CAPTION
TEXT
OFF
CH 1
CH 2
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJUST
MENU
CC
ES
Closed Caption
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
(MAIN MENU screen)
(CLOSED CAPTION setting screen)
MODE :
DATA :
15
1. User setting 2. Block table
PG
age
based
not to
block
not to
block
Select
block
auto-
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
BLOCK
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
1. User setting 2. Block table
PG
age
based
not to
block
not to
block
not to
block
Select
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
Parent Control (V-CHIP Operation)
H V-CHIP
This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
Restriction of TV programs includes two characters that contain information about the programs MPAA
rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted
by age and contents.
Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G GENERAL AUDIENCES. All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for
children under 13.
R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
X X Rating is an older rating that is unified with NC-17 but may be encoded on
older movies data.Note:
MPAA RATING
Example 1:
PG-13 in the age-based rating is blocked, this
will automatically block the higher ratings R,
NC-17, X also.
Note:
MPAA RATING is only age-based.
[2] TV PARENTAL GUIDELINES
content based
AGE D L S V FV
(Sexually (Adult (Sexual (Violence) (Fantasy
Suggestive Language) Situation) Violence)
Dialog)
TV-Y (All children)
V
––
TV-Y7 (Direct to Older Children)
V
––
V
TV-G (General Audience)
V
––
TV-PG (Parental Guidance
V V V V V
Suggested)
TV-14 (Parents Strongly
V V V V V
Cautioned)
TV-MA (Mature Audience Only)
V
V V V
V
: Content Rating can be set.
l : Content Rating cannot be set (not normally broadcast by TV station).
Example 2:
R in the age-based rating is blocked, this will
automatically block the higher rating NC-17, X
also.
age
based
RATING
age
based
16
Parent Control (V-CHIP Operation) (Continued)
TV PARENTAL GUIDELINES (Example)
Example 1.1 : Age Based setting
Clear
V
s (block) from each "AGE" box for all ratings.
This will automatically unblock everything.
Example 1.2 : Age Based setting
For TV-G put a
V
in the "AGE" box. This will automatically block the
higher age ratings TV-PG, TV-14 and TV-MA as well as TV-G.
Please note the content ratings D, L, S, V are automatically blocked
as well.
Example 2.1 : Content Based setting
If you choose to unblock every content-based items (D, L, S, V),
clear the
V
(block) from each AGE box of TV-PG, TV-14 and TV-
MA.
Example 2.2 : Content Based setting
Put a
V
in the box corresponding to TV-PG (row) and V (Violence)
(column). This will automatically block the V boxes for TV-14 and
TV-MA. Setting only TV-PG-V, TV-14-V or TV-MA-V will not block
all programs rated TV-PG, TV-14 or TV-MA.
Example 3 : Resetting an Age Based setting
For TV-14, put a
V
(block) in the AGE box.
This will again automatically block the content ratings D, L, S, V
for TV-MA as well as TV-14 (D is not available for TV-MA).
Please note that the lower age rating TV-PG does not change from its
previous settings after this.
Note:
Content ratings can be modified but only in the combinations indicated by
V
in the table on page 15.
Changing a lower age ratings content setting to BLOCK automatically changes the same higher age
ratings content setting to BLOCK regardless of their previous settings.
Changing a lower ratings AGE setting to BLOCK automatically changes all higher ratings to BLOCK
regardless of their previous settings.
For TV-Y7, TV-PG, TV-14 and TV-MA, if you clear the
V
in the AGE box (unblock) you can still
change settings based on content.
Clearing a higher ratings age or content setting will not clear lower settings. Make sure that all undesired
boxes are blocked.
[3] ADDITIONAL MODE
Besides MPAA RATINGS and TV PARENTAL GUIDELINES, new ratings systems data can be
downloaded when they become available. (See page 19.)
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
VVVV
VVVV
VVV
V
V
V
V
:
:
BLOCK
VIEW
FV
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
V
V
V
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
V
V
V
V
V
V
V
V
V
17
How to set V-CHIP
[1] MPAA RATING
1 Press MENU to access the MAIN MENU screen.
2 Press CH
a/s to move the “E mark to “PARENT CONTROL”.
3 Press VOL
k/l to access the PARENT CONTROL screen.
4 Press VOL
k/l to access the V-CHIP select screen.
Note:
If SECRET No. is already set, enter the SECRET No.
(See
To change the V-CHIP BLOCK after
registering a secret No. on page 22.).
5 Press VOL
k/l to select “MPAA”. Press CH
a/s to move the
E mark to “PG”, then press VOL
k/l to select BLOCK. If you
set “PG” to BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically
blocked.
6 Press MENU to return to the V-CHIP select screen.
(PARENT CONTROL screen)
(V-CHIP select screen)
(MAIN MENU screen)
VOLUME
(
k
)/(
l
)
CHANNEL
UP (a)/
DOWN (b)
MENU
Parent Control (V-CHIP Operation) (Continued)
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJUST
MENU
CC
ES
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJUST
MENU
CC
ES
V I EW T I MER
V CH I P BLOCK
PARENT CONTROL
MP AA
TV GU I DEL I NES
AD : OFFDOWNLO
STATUS : OFF
G
PG
PG 13
R
NC 17
X
B: LOCK
B: LOCK
B: LOCK
B: LOCK
B: LOCK
: ––––
MENU : RE TURN
18
7 Press MENU, then INPUT SECRET No. will be displayed.
Note:
If SECRET No. is already set, skip to step 9.
8 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.
9
When done, press MENU
to exit.
Note:
If you set G to BLOCK , all ratings are automatically blocked.
If you set X to BLOCK, G, PG, PG-13, R and NC-17 are not blocked.
[2] TV GUIDELINES
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH
a/s to move the E mark to TV GUIDELINES.
3 Press VOL
k/l to access the TV GUIDELINES screen.
4 To change AGE and CONTENT SETTING, press CH
a/s to move
the E mark to the desired rating and then press VOL
k/l
to
select.
5 Press CH
a/s to move the E mark to the desired content item
and then press VOL
k/l to select either BLOCK or “– –”
(unblock).
6 Press MENU
to return to the TV GUIDELINES screen.
7 Repeat steps 4 to 6 until all ratings and their contents are set.
8
When done, press MENU
to return to V-CHIP selct screen.
9 Press MENU to exit.
Note:
If SECRET No. is not set, enter a SECRET No. as show in steps 7 and 8 of [1] MPAA RATING.
Parent Control (V-CHIP Operation) (Continued)
(TV GUIDELINES screen)
(CONTENT RATING screen)
(V-CHIP select screen)
I NPU T
––––
SECRET No .
I NPU T
1234
SECRET No .
MP AA
TV GU I DEL I NES
AD : OFFDOWNLO
STATUS : OFF
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
:
:
BLOCK
VIEW
FV
V
A
TVY7
D
GE
L
S
V
V
F
:
:
:
:
:
B LOCK
B LOCK
:
–––––
–––––
–––––
–––––
MENU : RE TURN
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
VVVV
V
VVV
VVV
V
V
V
V
VV
:
:
BLOCK
VIEW
FV
321
654
987
100
0
ENTER
19
Parent Control (V-CHIP Operation Continued)Parent Control (V-CHIP Operation) (Continued)
[3] Downloading additional rating mode
There will be an additional new rating system. In that case,
please set up as follows. Subsequently the new rating
system will set up automatically.
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH a/s to move the E” mark to “DOWNLOAD”.
3 Press VOL k/l to select “DOWNLOAD : ON”.
4 Press MENU, then “INPUT SECRET No.” will be displayed.
Note:
If SECRET No. is already set, skip to step 6.
5 Enter a 4-digit secret No. using the REMOTE KEYPAD.
6 Press MENU to exit.
Downloading V-CHIP data
1 If you watch a program containing “new rating system data”, the
DOWNLOAD screen will be displayed.
2 The DOWNLOAD screen will disappear, once downloading is finished.
Note:
DOWNLOAD will not start, if you are not watching a program containing “new rating system data”.
MP AA
TV GU I DEL I NES
AD : OFFDOWNLO
STATUS : OFF
MP AA
TV GU I DEL I NES
AD : ONDOWNLO
STATUS : OFF
PL AESE AWTI
NOW DOWNLOADI
V CH I P DATA
NG
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
REMOTE
KEYPAD
MENU
I NPU T
––––
SECRET No .
I NPU T
1234
SECRET No .
321
654
987
100
0
ENTER
(DOWNLOAD screen)
20
How to set additional rating mode (Example)
Once downloading is complete, you can set the blocking pattern as follows.
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH a/s to move the E mark to Cdn. English Ratings,
then press VOL k/l.
3 You can select BLOCK or “– –” (unblock) for each rating
item by pressing CH a/s and VOL k/l.
4 You can select BLOCK or “– –” (unblock) for each rating
item by pressing CH a/s and VOL k/l if you select Cdn. French
Ratings in step 2.
Note:
You are able to download up to 4 different rating systems.
MPAA
TV GU I
Cdn .
DOWN L
nEglis Rhatinsg
Cdn .
rFenchRatinsg
EDLINES
OAD : ON
STATU
S:ON
(After downloading the
rating data)
C
C8+
G
PG
14+
18+
INDIV
B: LOCK
: ––––
B: LOCK
: ––––
B: LOCK
: ––––
IDUAL BL
MENU : RE TURN
OCK
(ENGLISH INDIVIDUAL
BLOCK screen)
G
8+
13+
16+
18+
INDIV
: ––––
B: LOCK
: ––––
B: LOCK
: ––––
IDUAL BL
MENU : RE TURN
OCK
(FRENCH INDIVIDUAL
BLOCK screen)
Parent Control (V-CHIP Operation) (Continued)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Sharp 32U-S50B Manuel utilisateur

Catégorie
Téléviseurs CRT
Taper
Manuel utilisateur

dans d''autres langues