Bose SoundSport® in-ear headphones — Apple devices Le manuel du propriétaire

Catégorie
Hauts-parleurs portatifs
Taper
Le manuel du propriétaire
SoundLink
®
Color
Bluetooth
®
speaker
Owner's Guide
Important Safety Instructions
2 - English
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose
Corporation is under license.
© 2017 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written
permission.
Please read this owners guide carefully and keep for future reference.
The lightning ash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated,
dangerous voltage within the system enclosure that may be of sufcient m
agnitude t
o constitute a risk of electric shock.
The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance
instructions in this owner’s guide.
WARNINGS
Do not expose this apparatus to dripping or splashing, and do not place objects lled with liquids such as vases, on or near
the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Exposure to liquids may
create a failure and/or re hazard.
To reduce the risk of re or electric shock, do not expose this product to rain or moisture.
Do not place naked ame sources, such as lighted candles, on or near the product.
This product contains magnetic material. Contact your physician if you have questions on whether this might affect the
operation of your implantable medical device.
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
CAUTION
Do not make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system
performance, and may void the warranty.
The battery used in this device may present a risk of re or chemical burn if mistreated. Do no disassemble, heat above
113°F (45°C), or incinerate.
NOTES
The product label is located on the bottom of the product.
Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily
operable.
The power supply must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats.
When using the product with a power supply (AC adapter), only use the power supply provided.
The product shall not be exposed to excessive heat such as sunshine, re or the like.
In the event of a battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash
the affected area with copious amounts of water and seek medical advice.
Do not attempt to replace the speaker battery. Contact Bose customer service using the contact information provided in this
guide.
Bose Corporation hereby declares that this product is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete
declaration of conformity can be found at: www.Bose.com/compliance
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
8.
Only use attachments/accessories specied by the manufacturer.
9. Unplug this apparatus during lightning storms or when unused for long periods of time.
10. Refer all servicing to qualied personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Important Safety Instructions
English - 3
Information about products that generate electrical noise
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a different circuit than the one to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
IN CANADA
This Class B digital apparatus complies with Canadian ICES-003, CAN ICES-3 (B) / NMB-3 (B).
This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be
co-located or be operating in conjunction with any other antennas or transmitters.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Output power: 8.99 mW (9.54 dBm) @ 2.48 GHz
This symbol means the product must not be discarded as household waste, and should be delivered to
an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural
resources, human health and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where you bought this product.
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part Name Lead (Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
(CR(VI))
Polybrominated Biphenyl
(PBB)
Polybrominated diphenylether
(PBDE)
PCBs X
O O O O O
Metal parts X O O O O O
Plastic parts O O O O O O
Speakers X O O O O O
Cables X O O O O O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the
limit requirement in SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part
is above the limit requirement in SJ/T 11363-2006.
Speaker battery:
Please complete and retain for your records:
The serial number and model number are located on the bottom of the speaker.
Serial number ________________________________________________________________________________________
Model number ________________________________________________________________________________________
Purchase date ________________________________________________________________________________________
We suggest you keep your receipt with this owner’s guide.
Contents
4 - English
Introduction
About your SoundLink
®
Color Bluetooth
®
speaker ..................................... 6
Features ....................................................................................................... 6
Unpacking ........................................................................................................... 7
Operation
Connecting to AC power ................................................................................... 8
Charging the battery ......................................................................................... 8
Battery indicator ........................................................................................ 9
Selecting a language for voice prompts ........................................................ 9
Turning voice prompts off/on ................................................................. 9
Changing the language ............................................................................. 9
Pairing the first mobile device ........................................................................ 10
Playing music ..................................................................................................... 10
Using the speaker with multiple devices ...................................................... 11
Pairing another device .............................................................................. 11
Managing multiple connections ............................................................. 11
Scrolling through other paired devices ................................................. 11
Clearing the speaker memory .................................................................. 11
Speaker controls ................................................................................................ 12
System status indicators ................................................................................. 13
Connecting an AUX device ............................................................................... 13
Operating on battery power ............................................................................ 14
Checking the battery ................................................................................. 14
Battery protection mode .......................................................................... 14
Auto off feature .................................................................................................. 14
Tips on placing the speaker ............................................................................. 14
English - 5
Contents
Care and Maintenance
Troubleshooting ................................................................................................ 15
Factory reset ....................................................................................................... 16
Cleaning ............................................................................................................... 16
Contacting Customer Service ......................................................................... 16
Limited Warranty ............................................................................................... 16
Technical Information ....................................................................................... 17
Introduction
6 - English
Introduction
About your SoundLink
®
Color Bluetooth
®
speaker
Your music keeps you moving. And with the SoundLink
®
Color Bluetooth
®
speaker,
now it can move with you.
Features
Inspired audio performance, anywhere you go.
Connects wirelessly to your smartphone, tablet or other Bluetooth enabled
devices – up to two at a time.
Voice prompts talk you through Bluetooth pairing so it’s easier than ever.
Available in a selection of colors.
Designed and tested to support an active, mobile lifestyle.
Lithium-ion battery allows up to eight hours of unplugged play time.
Charges with most USB power sources.
Introduction
English - 7
Unpacking
Check the carton for the speaker, the AC power supply, and the power supply
cord (USB). Be sure to save all packing materials. They provide the safest means
for any necessary shipping or transporting.
If any part of the product appears to be damaged, do not attempt to use it.
Contact your authorized Bose dealer immediately or call Bose Customer Service.
For contact information, visit: http://global.Bose.com
SoundLink
®
Color
Bluetooth
®
speaker
Power supply cord (USB)
AC power supply
Adapters (included only in certain regions)
Operation
8 - English
Connecting to AC power
Before using your speaker, connect it to AC power and charge the battery.
1. Plug the small end of the power supply cord into the POWER connector on
the back of the speaker.
2. Plug the large end of the power supply cord into the connector on the AC
power supply.
3. Extend the power supply prongs. If needed, snap on the adapter for your
region. To remove an adapter, pull back the release tab (A) and lift the adapter
up and off (B).
Note: Power hardware varies per region. You may not need to attach an
adapter to your power supply.
4. Plug the power supply into an AC (mains) power outlet.
The battery indicator
blinks amber and the speaker emits a tone.
Charging the battery
Allow three hours for a full charge.
Note: You can use the speaker while charging. Playing the speaker while charging
may increase charge time.
Operation
English - 9
Battery indicator
The battery indicator is located above the power button. While the battery is
charging, the battery indicator glows amber. When the battery is fully charged, the
indicator glows green.
Battery indicator (while speaker is charging)
Amber: Charging | Green: Fully charged
Note: Charging the speaker with the provided AC power supply will provide the
fastest charging time. You can also charge the speaker by connecting to a
powered USB port, such as on your computer. For faster charging time, use
the USB power cord provided by Bose.
Selecting a language for voice prompts
The speaker features voice prompts to guide you through the pairing and
connecting processes. Voice prompts also indicate the name of the currently
connected device(s) and remind you to charge the speaker when the battery is low.
The first time you use your speaker, you will need to select a language:
1. Press
to turn on the speaker.
2. Press
or to scroll through the list of language options:
English, Spanish, French, German, Mandarin, Japanese, Italian,
Portuguese, Dutch, Russian, Polish
3. When you hear your language, press and hold
to select.
Turning voice prompts off/on
If you prefer not to hear voice prompts, press and hold and at the same
time until you hear confirmation that voice prompts are off.
Repeat to turn voice prompts back on.
Changing the language
To change the selected language:
1. Press and hold
and at the same time until you hear the voice prompt
for the first language option.
2. Repeat steps 2 and 3, above.
During language selection the Bluetooth indicator glows solid blue.
Note: For more languages check: updates.Bose.com/SoundLinkColor
Operation
10 - English
Pairing the first mobile device
After you select a language, the speaker is ready to pair with your first mobile
device.
The Bluetooth indicator blinks blue, and the voice prompt says, “Ready to pair”.
1. On your mobile device, make sure Bluetooth is on.
(The Bluetooth menu is usually found in the Settings menu.)
2. Select Bose Color SoundLink from your mobile device’s Bluetooth list.
The Bluetooth indicator glows solid white, and the voice prompt says
“Connected to <device name>”.
Bluetooth
Settings
Devices
Bluetooth
ON
Bose Color SoundLink
Playing music
Once your mobile device is connected, start a music app on the device to play
music. You can use the playback and volume controls on your device or on the
speaker. See “Speaker controls” on page 12.
Operation
English - 11
Using the speaker with multiple devices
The speaker can remember up to eight paired devices and can be actively
connected to two devices at a time.
Pairing another device
1. With the speaker and the mobile device both on, press and hold until
the Bluetooth indicator blinks blue and the voice prompt says, “Ready to pair
another device”.
2. On your mobile device, make sure Bluetooth is on.
(The Bluetooth menu is usually found in the Settings menu.)
3. Select Bose Color SoundLink from the device list.
The Bluetooth indicator glows solid white, and the voice prompt says
“Connected to <device name>”.
Note: The speaker can remember up to eight devices. If you pair a ninth
device, the least recently used device will be deleted from the speaker’s
memory.
Managing multiple connections
When powered on, the speaker will automatically connect to the two most recently
connected devices.
When two devices are actively connected, you can play music from either device.
To switch between connected devices, pause the first device and play music from
the second.
Scrolling through other paired devices
To play music from a device in the speaker’s memory that is not currently
connected:
1. Press
to hear which device(s) are currently connected.
2. Press
again (within three seconds) to connect to the next paired device.
3. Repeat step 2 until you hear the correct device name.
Note: To use this feature, voice prompts must be on. (See “Turning voice
prompts off/on” on page 9.)
Clearing the speaker memory
To clear the speaker’s memory of all devices:
1. Press and hold
for ten seconds, until you hear Bluetooth device list
cleared.”
2. Delete Bose Color SoundLink from your mobile device’s Bluetooth list.
All Bluetooth devices are cleared and the speaker is ready to pair.
Operation
12 - English
Speaker controls
The speaker controls are located on the top of the speaker.
• Press to turn speaker on/off.
• With speaker on, press and hold to check the battery charge state.
• Press to select the Bluetooth source (if in AUX mode).
Press and hold to get ready to pair with another device.
With voice prompts on, press to hear which Bluetooth device is connected.
Press again (within three seconds) to connect with the next paired device.
• Press and hold for ten seconds to clear the speaker memory.
Press to select the AUX source (if in Bluetooth mode).
Press once to Play/Pause | Press twice to skip forward | Press three times
to skip backward. Note: Certain devices may not support these functions.
• In AUX mode, press to mute/unmute.
• In language selection mode, press and hold to select a language.
• Volume down
• Press to scroll through voice prompt language options.
• Volume up
• Press to scroll through voice prompt language options.
Press and hold together for three seconds to turn voice prompts on/off.
Press and hold together for three seconds to change the voice prompt
language.
Press and hold together for ten seconds to return the speaker to factory reset.
(See “Factory reset” on page 16.)
Press and hold together for three seconds to turn the Auto off feature
on/off. (See “Auto off feature” on page 14.)
Operation
English - 13
System status indicators
The system status indicators are located on the top of the speaker, above the
corresponding buttons.
Battery indicator (while speaker is operating on battery power)
Green: High charge
Amber: Medium charge
Red blinking: Low charge/Charge now
See “Operating on battery power” on page 14 for more information.
Bluetooth indicator
Blue blinking: Ready to pair
White blinking: Connecting
White solid: Connected
AUX indicator
White solid: AUX is the selected source
Connecting an AUX device
You can use your speaker with any device that features headphone or audio
output, such as a portable digital music player. This feature requires using a stereo
audio cable with a 3.5 mm plug on each end to connect the audio output of your
device to the AUX input on the speaker. This type of cable is available for purchase
at electronics stores.
To connect an AUX device:
1. Connect the audio cable to the AUX IN connector on the back of the speaker
and to the headphone or audio output connector on the device.
2. Turn on the speaker.
3. Press
to select the AUX source.
4. Adjust the volume on the connected device to near maximum, then use the
speaker volume buttons to adjust the volume level.
Operation
14 - English
Operating on battery power
Battery performance varies with the content played and the volume level at which it
is played. In typical use, the speaker battery lasts up to eight hours.
Checking the battery
Each time you turn the speaker on, the battery indicator will display the battery
charge level for two seconds. (See “System status indicators” on page 13.)
With the speaker on, press and hold
to check the battery charge level.
If the battery indicator begins to blink red while operating on battery power, the
battery is low and you must charge the speaker now.
Battery protection mode
When the speaker is unplugged and unused for more than 24 days, it enters
battery protection mode to preserve battery power. To reactivate the speaker,
connect it to AC power.
Auto off feature
If no Bluetooth device is actively connected, the speaker will automatically turn off
after 30 minutes of inactivity.
To turn off this feature, press and hold
and at the same time. You will hear
a voice prompt (or a tone) confirming that the Auto-off setting is off.
Repeat to turn the Auto-off setting back on.
Tips on placing the speaker
When using your speaker indoors, the sound quality can vary depending on where
the speaker is placed in a room.
When using your speaker outdoors, you should expect the sound quality to change
as you move farther away from the speaker.
Keep the following guidelines in mind when placing your speaker:
The speaker’s Bluetooth range is 33 feet (10 m). If you move the device farther
away from the speaker, sound quality will be affected and the device may
disconnect from the speaker.
For optimal sound, the front of the speaker should face the user.
For best bass response, the back of the speaker should be placed near a wall,
but not directly against a wall. Bass response decreases as the speaker is
moved away from a wall.
Do not place the speaker in small areas that are enclosed on all sides except the
front, as this will adversely affect sound quality.
Do not place the speaker on wet or dirty surfaces.
Only place the speaker upright, sitting on its rubber feet.
Care and Maintenance
English - 15
Troubleshooting
Problem
What to do
Speaker does not
turn on
(while operating on
AC power)
Make sure both ends of the power supply cable are firmly
connected.
Make sure the power supply is connected to a live AC (mains)
outlet.
Make sure you are using the power supply that shipped with your
speaker.
Speaker does not
turn on
(while operating on
battery power)
Battery may be in protection mode or may need to be charged.
Connect to a working AC outlet to restore the battery to
operational mode.
Speaker does not
connect with
mobile device
On your mobile device, turn off Bluetooth and turn it back on. Then
try pairing again.
Delete Bose Color SoundLink from the Bluetooth list on your
mobile device. Then try pairing again.
Move the mobile device closer to the speaker and away from any
interference or obstructions.
Try pairing another mobile device.
Clear the speaker’s memory:
Press and hold
for ten seconds until you hear, “Bluetooth de-
vice list cleared”. Delete Bose Color SoundLink from your mobile
device’s Bluetooth list. Then try pairing again.
No sound from a
Bluetooth device
Make sure the speaker power is on.
Make sure the volume is turned up on the speaker and on your
mobile device (and music app).
Press
to hear the name of the currently connected device.
Move the mobile device closer to the speaker and away from any
interference or obstructions.
Try using a different music app.
Try pairing another mobile device.
If two mobile devices are actively connected, make sure the other
device has been paused first.
If two mobile devices are actively connected, make sure both
devices are within range of the speaker (30 ft. or 10 m).
Poor sound quality
from a Bluetooth
device
Move the mobile device closer to the speaker, and away from any
interference.
Try using a different music app.
Try pairing another mobile device.
If two mobile devices are actively connected, make sure both
devices are within range of the speaker (30 ft. or 10 m) or
disconnect the second device.
Audio plays from
the wrong
Bluetooth device
(when two devices
are actively con-
nected)
Pause or quit the music app on the other device.
Start music on the intended device.
Care and Maintenance
16 - English
Problem
What to do
No audio from the
AUX device
Make sure the connected mobile device is on and playing.
Press the AUX button and check that the AUX indicator is on.
Make sure the 3.5 mm plug is fully inserted into the speaker, and
fully inserted into the source device.
Turn up the speaker volume to make sure the speaker is not muted.
Increase the volume level on the AUX device.
Try using a different AUX cable.
Poor sound quality
from an AUX device
Make sure the audio cable is firmly connected to the AUX IN
connector speaker and the source device.
Try connecting a different AUX device.
Factory reset
To restore the speaker to factory default settings (clear memory, clear language
selection, etc.) make sure the speaker is connected to a power source, then press
and hold
and at the same time for ten seconds.
Cleaning
To clean the exterior surface of your product, you can wipe it using a soft, dry
cloth.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to drop into any openings.
Contacting Customer Service
For questions about your speaker, contact your local Bose dealer.
To contact Bose directly, visit: http://global.Bose.com
US only: http://owners.Bose.com/SoundLinkColor
Limited Warranty
Your Bose
®
SoundLink
®
Color Bluetooth
®
speaker is covered by a limited warranty.
Details of the limited warranty are provided on the product registration card that is
included in the carton. Please refer to the card for instructions on how to register.
Failure to register will not affect your limited warranty rights.
Care and Maintenance
English - 17
Technical Information
Temperature range
32°-113°F (0°-45°C)
Operating time
Up to 8 hours
Bluetooth range
33 feet (10 m)
Power supply rating
Input: 100 - 240VAC , 50-60Hz, 0.18A
Output: 5VDC, 1.0A
Input power rating
Input: 5VDC, 1.0A Max
Dimensions
5.3" H x 5" W x 2.1" D (13.5 cm x 12.7 cm x 5.4 cm)
Weight
1.16 lb (0.53 kg)
©2017 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM724379 Rev. 01
Altavoz SoundLink
®
Color
Bluetooth
®
Guía del usuario
Instrucciones importantes de seguridad
2 - Español
La marca y los logotipos de Bluetooth
®
son marcas comerciales registradas propiedad de Bluetooth SIG Inc. y cualquier uso de
dichas marcas por parte de Bose Corporation se encuentra bajo licencia.
© 2017 Bose Corporation. No se puede reproducir, modificar, distribuir, o usar de otra manera ninguna parte de este trabajo sin
previo consentimiento por escrito.
Lea atentamente esta guía del propietario y consérvela para consultarla en el futuro.
El símbolo de relámpago con punta de flecha dentro de un triángulo equilátero alerta al usuario acerca de la presencia
de voltaje peligroso no aislado dentro de la carcasa del sistema, que puede ser de una m
agnitud s
uficiente para
constituir un riesgo de choque eléctrico.
El signo de exclamación dentro de un triángulo equilátero alerta al usuario de la presencia de instrucciones operativas
y de mantenimiento importantes en la guía del propietario.
ADVERTENCIAS
• No exponga el aparato a goteos o salpicaduras, no coloque encima, ni cerca del aparato, objetos llenos con líquido como
jarrones. Al igual que con los productos electrónicos, tenga cuidado de no derramar líquidos en sobre ninguna pieza del
sistema. La exposición a líquidos puede crear una falla o un peligro de incendio.
Para reducir el riesgo de incendio o de choque eléctrico, no exponga este producto a la lluvia ni a la humedad.
No coloque fuentes de llama al descubierto, como velas encendidas sobre el producto, o en su proximidad.
Este producto contiene material magnético. Póngase en contacto con su médico si tiene preguntas acerca de si esto
podría afectar el funcionamiento de su dispositivo médico implantable.
Contiene piezas pequeñas que pueden representar un peligro de asfixia. No es indicado para niños menores de tres años.
PRECAUCIÓN
• No realice alteraciones no autorizadas al producto; al hacerlo puede comprometer la seguridad, el cumplimiento de las
normas, el rendimiento del sistema y puede invalidar la garantía.
La batería que se usa en este dispositivo puede presentar un riesgo de incendio o quemadura química, si no se trata
correctamente. No desarme, ni caliente a más de 113° F (45° C), ni incinere.
NOTAS
• La etiqueta del producto se encuentra en la parte inferior del producto.
Si se utiliza la clavija de conexión de red o el acoplador del artefacto como el dispositivo de desconexión, dicho dispositivo
de desconexión deberá permanecer listo para funcionar.
La fuente de alimentación debe usarse bajo techo. No está diseñado ni sometido a prueba para su uso al aire libre,
en vehículos de recreación o en barcos.
Al utilizar el producto con una fuente de alimentación (adaptador de CA), use solamente la fuente de alimentación
suministrada.
El producto no deberá exponerse a calor excesivo como la luz solar, el fuego, o algún elemento similar.
En el caso de que la batería presente una fuga, no permita que el líquido entre en contacto con la piel o los ojos. Si se ha
hecho contacto, lave el área afectada con abundante cantidad de agua y busque asistencia médica.
No intente cambiar la batería del altavoz. Comuníquese con el servicio al cliente de Bose usando la información de contacto
que figura en esta guía.
Por la presente, Bose Corporation declara que este producto cumple con los requisitos esenciales y con otras
cláusulas relevantes de la Directiva 2014/53/EU y con todos los demás requisitos de directivas correspondientes
de la UE. La declaración de conformidad completa se puede encontrar en www.Bose.com/compliance
1. Lea estas instrucciones.
2. Conserve estas instrucciones.
3. Tenga en cuenta las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca del agua.
6. Límpielo solamente con un paño seco.
7. No lo coloque cerca de ninguna fuente de calor, como radiadores, rejillas de calefacción, estufas u otros aparatos (incluidos los
amplificadores) que produzcan calor.
8. Utilice únicamente accesorios especificados por el fabricante.
9. Desenchufe este aparato durante tormentas eléctricas o cuando no lo utilice durante períodos de tiempo prolongados.
10. Derive todas las tareas de servicio a personal calificado. Se requieren tareas de servicio cuando el aparato se haya dañado de alguna
manera, por ejemplo si se dañó el cable de alimentación, si se derramó líquido o si cayeron objetos dentro del aparato, el aparato
estuvo expuesto a la lluvia o la humedad, no funciona normalmente, o se ha caído.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Bose SoundSport® in-ear headphones — Apple devices Le manuel du propriétaire

Catégorie
Hauts-parleurs portatifs
Taper
Le manuel du propriétaire