Sauder 410375 Assembly Instructions Manual

NOTE

register your new purchase online

www.sauder.com

For immediate service,

our website is available

24 hours a day, 7 days a week

to order replacement parts,

access assembly tips,

register your product,

and view Sauder products.

Mon-Fri - 9am-5:30pm ET

United States and Canada (except holidays)

Consumer Services 1-800-523-3987

DO NOT RETURN YOUR UNIT

TO THE STORE

Contact us ﬁ rst

Most replacement parts ship from our

facility in one or two business days.

www.sauder.com

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Record the date you purchased this unit and save the booklet for

future reference.

If you ever need to contact Sauder about this unit, refer to the lot #

and the model # when calling our toll-free number. For more

information about our furniture, company, or to order replacement

parts, please visit our web site.

06 / 08 / 12

Lot #: 345560

Date Purchased: ____________

5-Shelf Bookcase

Model # 410375

Assembly Instructions

The back pages of this book are French and Spanish

instructions.

Les pages de arrière de ce livre sont des instructions

françaises en español.

Se incluyen las instrucciones françaises en español en

el dorso de este folleto. Para facilitar su uso, se puede

desprenderlas fácilmente.

RIGHT

END - 1

A

LEFT

END - 1

B

LOWER RIGHT

END - 1

C

LOWER LEFT

END - 1

D

TOP - 1

E

BOTTOM - 1

F

SHELF - 1

G

BACK - 1

I

LARGE

BACK - 1

H

ADJUSTABLE

SHELF - 3

J

END

MOLDING - 2

K

PARTS IDENTIFICATION

While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help

distinguish similar parts from each other. Use this

PARTS IDENTIFICATION

to help identify similar parts.

410375

BASE - 1

L

TOP

MOLDING - 1

M

SHELF

MOLDING - 3

N

SKIRT - 1

O

LOWER END

MOLDING - 2

P

PART IDENTIFICATION (CONTINUED):

HARDWARE IDENTIFICATION

SAFETY BRACKET - 1

S

CAM COVER - 8

U

HIDDEN CAM - 12

Q2

CAM DOWEL - 12

R2

ANGLE BRACKET - 8

T

HOLE PLUG - 3

V

METAL PIN - 12

W

410375

SCREWS SHOWN ACTUAL SIZE

Using a SCREW that is too long will caus

e

d

a

mage. Before beginning assembly, separate

each type of SCREW. Carefully study the SCREW diagrams below

(

(SHOWN ACTUAL SIZE

)

.

Pay close attention to the color of each SCREW. You may receive extra hardware with your unit.

HAMMER

1

ASSEMBLY TOOLS REQUIRED

NO. 2 PHILLIPS SCREWDRIVER

TIP SHOWN ACTUAL SIZE

BLACK 1-1/8” PAN HEAD SCREW - 3

Y

BLACK 9/16” LARGE HEAD SCREW - 17

Z

NAIL - 55

AA

BLACK 1-7/8” FLAT HEAD SCREW - 5

X

410375

2

A

B

D

C

F

Do not tighten the HIDDEN CAMS in this step.

Arrow

Insert the metal end of the CAM

DOWEL into the HIDDEN CAM.

www.sauder.com/services

Look for this icon. It means a

video assembly tip is available at:

www.sauder.com/services/tips

Assemble your unit on a carpeted ﬂ oor or on the empty carton to avoid scratching your unit or the ﬂ oor.

 Push twelve HIDDEN CAMS (Q2) into the ENDS (A and B), LOWER ENDS (C and D), and BOTTOM (F). Then, insert the

metal end of the CAM DOWELS (R2) into the HIDDEN CAMS.

410375

(12 used)

Arrow

Q2

R2

3

A

B

E

Notched edge

Long ﬁ nished edge

Caution

Risk of damage or

injury. Hidden Cams

must be completely

tightened. Hidden

Cams that are not

completely tightened

may loosen, and parts

may separate.

To completely tighten:

Start Tighten

Arrow

Maximum

210 degrees

Minimum

190 degrees

 Fasten the ENDS (A and B) to the TOP (E). Tighten four HIDDEN CAMS.

410375

4

 Fasten the TOP MOLDING (M) to the TOP (E). Use three BLACK 1-1/8” PAN HEAD SCREWS (Y).

 Insert three HOLE PLUGS (V) into the holes in the TOP MOLDING (M).

E

V

Curved edge

M

BLACK 1-1/8” PAN HEAD SCREW

(3 used in this step)

Y

www.sauder.com/services

410375

5

A

B

K

 Slide the END MOLDINGS (K) onto the notched edges of the ENDS (A and B).

* U.S. Patent No. 5,499,886

Slide the END MOLDINGS (K)

onto the notched edges.

www.sauder.com/services

410375

6

A

B

 Fasten the SHELF (G) to the ENDS (A and B). Use four BLACK 1-7/8” FLAT HEAD SCREWS (X).

Long ﬁ nished edge

G

Surface with

more holes

www.sauder.com/services

X

BLACK 1-7/8” FLAT HEAD SCREW

(4 used in this step)

410375

7

 Fasten the LOWER LEFT END (D) to the SHELF (G). Tighten two HIDDEN CAMS.

Notched edge

D

G

Maximum

210 degrees

Minimum

190 degrees

Arrow

www.sauder.com/services

410375

8

 Fasten the BOTTOM (F) to the LOWER LEFT END (D). Tighten two HIDDEN CAMS.

Maximum

210 degrees

Minimum

190 degrees

Arrow

Notched edge

These holes should

be located here.

G

F

D

Unﬁ nished

surface

www.sauder.com/services

410375

9

 Fasten the LOWER RIGHT END (C) to the BOTTOM (F) and SHELF (G). Tighten four HIDDEN CAMS.

 Slide the LOWER END MOLDINGS (P) onto the notched edges of the LOWER ENDS (C and D).

* U.S. Patent No. 5,499,886

Slide the LOWER END MOLDINGS (P)

onto the notched edges.

G

D

F

C

P

Maximum

210 degrees

Minimum

190 degrees

Arrow

www.sauder.com/services

410375

10

 Fasten five ANGLE BRACKETS (T) to the LOWER ENDS (C and D) and BOTTOM (F). Use five BLACK 9/16” LARGE

HEAD SCREWS (Z).

NOTE: Be sure the ANGLE BRACKETS are even with the edges of the LOWER ENDS and BOTTOM.

 Fasten the BASE (L) to the LOWER ENDS (C and D) and BOTTOM (F). Use five BLACK 9/16” LARGE HEAD

SCREWS (Z).

D

F

C

L

(5 used)

T

Rounded edge

www.sauder.com/services

BLACK 9/16” LARGE HEAD SCREW

(10 used in this step)

Z

410375

11

 Fasten three ANGLE BRACKETS (T) to the SHELF (G). Use three BLACK 9/16” LARGE HEAD SCREWS (Z).

 Fasten the SKIRT (O) to the SHELF (G). Use three BLACK 9/16” LARGE HEAD SCREWS (Z).

NOTE: There are no pre-drilled holes in the SKIRT. The SCREWS will tighten into the groove.

BLACK 9/16” LARGE HEAD SCREW

(6 used in this step)

Z

(3 used)

T

G

O

www.sauder.com/services

410375

12

 Carefully turn your unit over onto its front edges. Unfold the LARGE BACK (H) and lay it over your unit.

 Make equal margins along all four edges of the LARGE BACK (H). Push on opposite corners of your unit if needed to make it

“square”.

 Fasten the LARGE BACK (H) to your unit using the NAILS (AA). The NAILS should be 5-1/2” apart, 1-1/2” from the

corners, and 1/4” in from the edges. Also, be sure the NAILS are 1/2” from each fold line in the BACK.

 Repeat this step for the BACK (I).

Do not stand the unit upright without the

BACK fastened. The unit may collapse.

Caution

1/4”

5-1/2”

1-1/2”

H

I

1”

1/2”

Do not fasten NAILS along this edge until the

BACK (I) is overlapping the LARGE BACK (H).

www.sauder.com/services

AA

NAIL

(55 used in this step)

410375

13

 Slide the SHELF MOLDING (N) onto the notched edge of one of the ADJUSTABLE SHELVES (J).

 Repeat this step for the other ADJUSTABLE SHELVES (J).

* U.S. Patent No. 5,499,886

J

N

Slide the SHELF MOLDING (N)

onto the notched edge.

www.sauder.com/services

410375

14

 Carefully stand your unit upright.

 Insert the METAL PINS (W) into the hole locations of your choice in the ENDS (A and B) and LOWER ENDS (C and D). Set

the ADJUSTABLE SHELVES (J) onto the METAL PINS.

(12 used)

A

B

C

D

J

W

www.sauder.com/services

410375

15

BLACK 9/16” LARGE HEAD SCREW

(1 used for the SAFETY BRACKET)

Z

www.sauder.com/services

X

BLACK 1-7/8” FLAT HEAD SCREW

(1 used into a stud in your wall)

NOTE: This unit must be placed against a wall.

 We recommend using the SAFETY BRACKET (S) for added stability. Use a BLACK 9/16” LARGE HEAD SCREW (Z) into

the top of the unit and a BLACK 1-7/8” FLAT HEAD SCREW (X) into a stud in your wall.

 Push a CAM COVER (U) onto each visible HIDDEN CAM.

NOTE: Please read the back pages of the instruction booklet for important safety information.

This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.

S

To cover HIDDEN CAMS

Pour couvrir les EXCENTRIQUES ESCAMOTABLES

Para cubrir los EXCÉNTRICOS ESCONDIDOS

(8 used)

U

30 lbs.

No load

30 lbs.

40 lbs.

50 lbs.

410375

1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a

period of ﬁ ve years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As

used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This

Warranty gives you speciﬁ c legal rights, and you may also have other rights which vary from state to state.

2. There is no warranty coverage for defects or conditions that result from the failure to follow product assembly instructions,

information or warnings, misuse or abuse, intentional damage, ﬁ re, ﬂ ood, alteration or modiﬁ cation of the product, or use

of the product in a manner inconsistent with its intended use, nor any condition resulting from incorrect or inadequate

maintenance, cleaning, or care. There is also no warranty coverage for rented products or any products purchased “used” or

“as is”, at a distress or going-out-of business sale, or from a liquidator.

3. As the exclusive remedy under this Warranty, Sauder will (at its sole option) repair or replace any defective furniture

component. Sauder may require independent conﬁ rmation of the claimed defect and proof of purchase. Replacement parts

will be warranted for only the remaining period of the original Warranty. SAUDER SHALL HAVE NO LIABILITY for ANY

INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND and all such damages are EXCLUDED FROM THIS

WARRANTY, such as loss of use, disassembly, transportation, labor or damage to property on or near the product. Some states

do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not

apply to you.

4. This Warranty applies only to warranted defects that ﬁ rst arise and are reported to Sauder within the warranty coverage

period. The Warranty cannot be transferred to subsequent owners or users of the product, and it shall be immediately void in

the event the product is resold, transferred, leased or rented to any third party or person other than the original purchaser.

5.

THERE ARE NO OTHER WARRANTIES APPLICABLE TO THIS PRODUCT. Under the laws of certain states, there

may be no implied warranties from Sauder and all implied warranties, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE are disclaimed where allowed by law. TO THE

EXTENT ANY IMPLIED WARRANTIES ARE APPLICABLE, ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO

THE DURATION OF THIS EXPRESS WARRANTY or the minimum period allowed by law, whichever is shorter. Some states

do not allow limitations on how long an implied Warranty lasts, so the above limitation may not apply to you.

6. For Warranty inquiries or claims, please visit our website www.sauder.com. You can also contact Sauder at

1-800-523-3987. Sauder may require Warranty claims to be submitted in writing to Sauder Woodworking Co., 502 Middle

Street, Archbold, OH 43502 USA. Please include your sales receipt or other proof of purchase and a speciﬁ c description of

the product defect.

5-YEAR LIMITED WARRANTY

www.sauder.com/services

410375

WARNING

Please use your furniture correctly and safely. Improper use can cause safety hazards,

or damage to your furniture or household items. Carefully read the following chart.

Look out for: What can happen: How to avoid the problem:

• Overloaded shelves.

• Improper loading can cause the

product to be top-heavy.

• Risk of injury.

• Top-heavy furniture can tip over.

• Overloaded shelves can break.

• Never exceed the weight limits shown in

the instructions.

• Work from bottom to top when loading

shelves. Place the heavier items on the

lower shelves.

• Improperly moving furniture that is not

designed and equipped with casters.

• Furniture can tip over or break if

improperly moved.

• Physical injury. Furniture can be very

heavy.

• Unload shelves from top to bottom

before moving the furniture.

• Do not push furniture, especially on a

carpeted ﬂ oor. Have a friend help you lift

the item and set it in place.

• This unit must be positioned against a

wall.

• Children climbing on the shelves can

cause the product to tip.

• Risk of injury or death. • Do not allow children to climb on the

shelves. Avoid placing items like toys or

candy on upper shelves.

• Use the supplied safety bracket for added

stability.

• Placing TVs on furniture items that are

not designed to support a television is

hazardous.

• Risk of injury or death. TVs can be

very heavy. Plus the weight and location

of the picture tube tends to make TVs

unbalanced and prone to tipping forward.

• This product is not designed to support a

television.

410375

La page charge ...

Sauder 410375 Assembly Instructions Manual

Sauder 410375 Assembly Instructions Manual

dans d''autres langues

Documents connexes