COMPAQ 4-in-1 Notebook Accessory Kit
Model CPQ04MAK
FCC STATEMENT
CPQ04MAK
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction guide, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult a service representative for help.
Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. Micro Innovations is not responsible
for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to
this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment.
Responsible party:
Micro Innovations
400 Clearview Ave.
Edison, NJ 08837
Telephone: 1(877) 550-5534
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de classe B est conforme à la norme NMB-003 du Canada.
Table of Contents
USB Notebook Light……………………..……………..………… Page 4
19 Key Slim Keypad….………………….………………..……… Page 5
6 Foot Auto Retractable Phone Cable…...…………………..… Page 6
3 Button Optical Scroll Mouse………………….……………..… Page 7
Troubleshooting………...………………………………………… Page 8
Welcome
Its flexible neck allows you to adjust the USB Notebook Light
to provide long-lasting illumination to you notebook
keyboard. This device is supported in Windows 2000 | XP
Pro | XP Home | XP Tablet Edition
USB Notebook Light
User Setup
STEP 1 – Power on your system.
STEP 2 – Connect the USB Notebook light
to any available USB port or hub
connected to your computer.
4
Its slim and sleek design makes it perfect for traveling and
stores easily into any notebook carrying case. This device is
supported in Windows 2000 | XP Pro | XP Home | XP Tablet
Edition
19 Key USB Slim Keypad
User Setup
STEP 1 – Power on your system.
STEP 2 – Connect the Compaq Slim Keypad
to any available USB port or hub connected to
your computer. The “Found New Hardware”
wizard will appear on your screen. Your
computer will automatically install the
necessary drivers needed.
5
Warning: Watch for quick moving wires while retracting.
6 Foot Auto Retractable Phone Cable
STEP 2 - Be careful not to
pull the cable past the
intended length or it could
result in damage to the
cord or mechanism inside.
STEP 1 - Hold your 6’
Auto Retractable Phone
Cable with one hand
while gently pulling the
modules outward.
STEP 3 - To retract the
cable, push black button
located on the bottom.
6
The advanced design makes the Compaq 3 Button Optical
Mouse with lighted logo comfortable and easy to use. This
device is supported in Windows 2000 | XP Pro | XP Home |
XP Tablet Edition
User Setup
STEP 1 - Power on your system.
STEP 2 - Connect the Compaq 3 Button
Optical Mouse to any available USB port
or hub connected to your computer. Your
mouse is now ready for use.
3 Button Optical Scroll Mouse
7
Troubleshooting
• You may have connected your device while the computer was shut down. Try
restarting your computer and reconnecting your device.
• If you have Windows 95 or Windows NT, these operating systems do not
support USB devices. This device isn’t compatible with Windows 95 or NT.
• The Universal Serial Bus Controller and USB root hub may not be properly
installed on your system. Contact your computer manufacturer for details.
WARNING: Keep all beverages away from the mouse working area and avoid
any spills. There are no user serviceable parts. Service and repair may only be
done by Micro Innovations.
Technical Support
For technical assistance call 1-888-627-3792 or visit www.microinv.com/compaq.
Technical Support hours of operation:
Monday - Friday 8:30am to 7:00pm E.S.T.
8
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
