Pride FULL-SIZE 613 Le manuel du propriétaire

Serial #/série #/serie #/seriell #/serie # /seriale #

Provider:

Détaillant:

Leverancier:

Name:

Rivenditore:

Proveedor:________________________________________________________________________

Address:

Adresse:

Adres:

Adresse:

Indirizzo:

Dirección:________________________________________________________________________

Telephone:

Téléphone:

Telefoon nummer:

Tel. Nummer:

Telefono:

Número de teléfono:________________________________________________________________

Purchase Date:

Date d’achat:

Koop Datum:

Kaufdatum:

Data di acquisto:

Fecha de compra:___________________________________________________________________

Please ﬁ ll out the following information for quick reference:

S.V.P. veuillez compléter les informations ci dessous:

Vul alstublieft de volgende informatie in voor snelle referentie:

Mein autorisierter Fachhändler ist:

Informazioni di riferimento:

Por favor, rellene la siguiente información para tener siempre a mano:

4

SCOOTER FEATURES TABLE

INFMANU4530/Rev D/September 2017

NOTE: Please become familiar with your scooter’s model number. The number can be found on the product

speciﬁ cation sheet in your owner’s package. Throughout this owner’s manual, Scooter attributes are identiﬁ ed by

model number (far left-hand column on Scooter Features Table). Knowing your unit’s model number will aid you

in determining your particular scooter’s unique characteristics.

I

NTENDED USE

The intended use of the mobility device is to provide mobility to persons limited to a seated position that have the

capability of operating a scooter.

REGARDING DEVICES FOR PRESCRIPTION USE

CAUTION! Federal law restricts this device to sale by or on the order of a physician or

other certiﬁ ed personnel licensed by the law of the State (US only) or region in which

this personnel practices to use or order the use of this device.

NOTE: This owner’s manual is compiled from the latest speciﬁ cations and product information available at

the time of publication. We reserve the right to make changes as they become necessary. Any changes to our

products may cause slight variations between the illustrations and explanations in this manual and the product

you have purchased. The latest/current version of this manual is available on our website.

NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.

NOTE: This product complies with IPX4 Classiﬁ cation (IEC 60529).

NOTE: The scooter and its components are not made with natural rubber latex. Consult with the manufacturer

regarding any after-market accessories.

*NOTE: Scooter options vary by country. Please contact your Provider to determine which options are available for

your Scooter.

Full-size Scooter Series 3

CONTENTS

SAFETY GUIDELINES ............................................................................................... 3

I. SAFETY ............................................................................................................ 4

II. YOUR SCOOTER .............................................................................................. 7

III. BATTERIES AND CHARGING ......................................................................... 19

IV. OPERATION ................................................................................................... 26

V. COMFORT ADJUSTMENTS ............................................................................ 28

VI. DISASSEMBLY AND ASSEMBLY .................................................................... 32

VII. BASIC TROUBLESHOOTING .......................................................................... 34

VIII. CARE AND MAINTENANCE ........................................................................... 36

SAFETY GUIDELINES

WARNING! An authorized Provider or qualiﬁ ed technician must perform the initial setup of this

scooter and must perform all of the procedures in this manual.

The symbols below are used throughout this owner’s manual and on the scooter to identify warnings and important

information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated

procedures can cause either personal injury, component damage, or malfunction. On the

product, this icon is represented as a black symbol on a yellow triangle with a black border.

MANDATORY! These actions should be performed as speciﬁ ed. Failure to perform mandatory

actions can cause personal injury and/or equipment damage. On the product, this icon is

represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any

time or in any circumstances. Performing a prohibited action can cause personal injury and/or

equipment damage. On the product, this icon is represented as a black symbol with a red circle

and red slash.

4 Full-size Scooter Series

Manufactured in

Fully charge batteries before operating.

Remove key from an unattended Scooter.

Battery Set Conﬁ guration:

+ = Positive (Red) Terminal Post

- = Negative (Black) Terminal Post

Connect Red wires to Red Positive (+) Terminal Posts.

Connect Black wire to Black Negative (-) Terminal Posts.

Read and follow the information in the owner’s manual.

I. SAFETY

PRODUCT SAFETY SYMBOLS

The symbols below are used on the scooter to identify warnings, mandatory actions, and prohibited actions. It is

very important for you to read and understand them completely.

NOTE: There are more warnings identiﬁ ed and explained in the Consumer Safety Guide that is included with

your scooter. Please become familiar with all the warnings and safety information found in the Consumer

Safety Guide and refer to this resource often.

Indicates tie-down points on the Scooter.

Scooter information label

Does not meet ISO 7176-19 standards for occupied transport in a motor

vehicle. When travelling in a motor vehicle, do not sit in your scooter.

MODEL #

60 AMP

CIRCUIT BREAKER

125A/50V

BATTERY

OR

Full-size Scooter Series 5

I. SAFETY

GENERAL

MANDATORY! Do not operate your new scooter for the ﬁ rst time without completely reading and

understanding this owner’s manual and the Consumer Safety Guide.

Your scooter is a state-of-the-art life-enhancement device designed to increase mobility. We provide an extensive

variety of products to best ﬁ t the individual needs of the scooter user. Please be aware that the ﬁ nal selection and

purchasing decision regarding the type of scooter to be used is the responsibility of the scooter user, who is capable

of making such a decision and his/her healthcare professional (i.e., medical doctor, physical therapist, etc.).

The contents of this manual are based on the expectation that a mobility device expert has properly ﬁ tted the

scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Provider in the

instruction process for the use of the product.

There are certain situations, including some medical conditions, where the scooter user will need to practice

operating the scooter in the presence of a trained attendant. A trained attendant can be deﬁ ned as a family member

or care professional specially trained in assisting a scooter user in various daily living activities.

As you begin using your scooter during daily activities, you will probably encounter situations in which you will

need some practice. Simply take your time and you will soon be in full and conﬁ dent control as you maneuver

through doorways, on and off elevators, up and down ramps, and over moderate terrain.

Additional general information can be found on the supplemental information sheets and booklets included in

your Owner’s Package. Please fully read and review the information, and keep it readily available for future

reference.

Below are some precautions, tips, and other safety considerations that will help you become accustomed to

operating the scooter safely.

PRE-RIDE SAFETY CHECK

Get to know the feel of your scooter and its capabilities. We recommend that you perform a safety check before

each use to make sure your scooter operates smoothly and safely.

Perform the following inspections prior to using your scooter:

 Check the condition of the tires. Make sure they are not damaged or excessively worn.

 Check all electrical connections. Make sure they are tight and not corroded.

 Check all harness connections. Make sure they are secured properly.

 Check the brakes to ensure they operate properly.

 Check the battery condition meter to ensure the batteries are fully charged.

 Ensure the manual freewheel lever is in drive mode before sitting on the scooter.

If you discover a problem, contact your authorized Provider for assistance. Please refer to the Contact Information

insert in your Owner’s Package.

6 Full-size Scooter Series

I. SAFETY

BRAKING INFORMATION

Your scooter is equipped with these powerful brake systems:

 Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the center/

stop position.

 Disc Park Brake: Activates mechanically after regenerative braking slows the vehicle to near stop or when

power is removed from the system for any reason.

 (Optional) Handbrake: This lever provides you with emergency stopping power. See II. “Your Scooter.”

HANDBRAKE LEVER (OPTIONAL — MODELS 613, 713, 714 AND 713ES)

The handbrake lever contains hydraulic ﬂ uid. When the lever is depressed, the ﬂ uid is pushed through the brake

line to engage the brake pads against the brake discs. The handbrake lever is a completely sealed unit, meaning

that the hydraulic ﬂ uid should not leak; however, there are certain safety measures that should be taken if the

handbrake lever becomes cracked or damaged.

 Do not touch spilled material unless wearing protective equipment, such as safety goggles and gloves.

 For small spills, cover the material with dry earth, sand or other non-combustible absorbent material. Once

absorbed, enclose the material in a plastic bag and contact your local waste disposal agency for proper disposal

measures. Do not expose the material to waterways or sewers.

 If the eyes are exposed, check for and remove contact lenses. Flush eyes with cool, clean, low-pressure water

while occasionally lifting and lowering the eyelids. Seek medical attention if excessive tearing, redness or

pain persists.

 If the skin is exposed, remove all contaminated clothing. Wipe off excess material and wash exposed skin

with soap and water. Seek medical attention if skin appears damaged or if irritation persists. Thoroughly clean

contaminated clothing before reuse. Discard contaminated leather goods.

 If ingested, do not induce vomiting or give anything to drink unless directed to by a physician. Never give

anything by mouth to a person who is not fully conscious. Seek medical attention immediately.

 If inhaled, move the affected individual to fresh air. If the affected individual is not breathing, immediately

begin rescue breathing. If breathing is difﬁ cult, 100% humidiﬁ ed oxygen should be administered by a qualiﬁ ed

individual. Seek medical attention immediately and keep the affected individual warm and at rest.

 If ignited, use dry chemical, foam, carbon dioxide or water fog to extinguish.

WARNING! Do not modify the handbrake lever or attempt to replace the hydraulic ﬂ uid. If damage

occurs, follow the safety information in this section and contact your authorized dealer for

handbrake replacement. The hydraulic handbrake should only be serviced or replaced by your

authorized dealer.

WARNING! The handbrake contains hydraulic ﬂ uid that can cause mild skin, eye and nasal/

bronchial irritation. Do not attempt to adjust or service the handbrake without proper protective

equipment such as safety goggles and gloves and wash hands after handling.

Full-size Scooter Series 7

II. YOUR SCOOTER

TILLER CONSOLE

The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial, key

switch, battery condition meter, status LED, horn buttons, turn signal buttons, handbrake lever, tiller adjustment

lever, and the throttle control lever. Please note that some of the features listed in this section are optional items

and may not appear on your scooter. See ﬁ gure 1.

NOTE: If your scooter is equipped with an LCD Control Panel, please advance to the page in this section that

begins TILLER CONSOLE: LCD CONTROL PANEL.

PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console

does become exposed to moisture, do not attempt to operate your scooter until the tiller console

has dried thoroughly.

IDENTIFICATION KEY

1. HORN BUTTON

2. *LEFT TURN SIGNAL BUTTON

3. *HAZARD LIGHTS SWITCH

4. LIGHT SWITCH

5. *RIGHT TURN SIGNAL BUTTON

6. *HI-LOW SWITCH

7. THROTTLE CONTROL LEVER

8. SPEED ADJUSTMENT DIAL

9. BATTERY CONDITION METER

10. KEY SWITCH

11. MIRROR AND MIRROR PLUGS

12. *TILLER ADJUSTMENT LEVER

13. *HANDBRAKE LEVER

14. *BRAKE LOCK

11

8 9 10

13

12

11

7

1

2 5

11

6

4

3

14

7

Figure 1. Tiller Console Components - Style A

*OPTIONAL COMPONENTS AVAILABLE ON SOME MODELS

**LOCATION OF HI-LOW SWITCH MAY VARY DEPENDING ON MODEL**

8 Full-size Scooter Series

II. YOUR SCOOTER

Horn Buttons

These buttons activate a warning horn. Your scooter must be powered up for the horn to be operational. Do not

hesitate to use the warning horn when doing so may prevent accident or injury.

Turn Signal Buttons

Use these buttons to turn on the left and right turn signal (amber) lights.

 Push the left button to activate the left turn signal light. The turn signal LED located in the battery condition

meter will ﬂ ash.

 Push the right button to activate the right turn signal light. The turn signal LED located in the battery condition

meter will ﬂ ash.

 The turn signals are timed to shut off automatically.

Lights Switch

This switch controls your scooter’s lighting system.

 Toggle the switch forward to turn on the lighting system.

 Toggle the switch rearward to turn off the lighting system.

WARNING! Scooter users are required to use their lights when visibility is restricted—day or

night.

Hazard Lights Switch

This switch activates the 4-way ﬂ ashers on your scooter.

 Toggle the hazard lights switch forward to turn on the ﬂ ashers.

 Toggle the hazard lights switch rearward to turn off the ﬂ ashers.

Hi-Low Switch

This switch toggles the scooter’s speed between Hi and Low. Toggle the switch forward (Hi) to achieve the

maximum preprogrammed speed for the scooter. Toggle the switch rearward (Low) to achieve half the maximum

preprogrammed speed of the scooter.

Throttle Control Lever

This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum speed

you preset with the speed adjustment dial.

To Move Forward, use either of the following:

 Use your left thumb to push the left side of the throttle control lever.

 Use your right hand ﬁ ngers to pull back on the right side of the throttle control lever.

To Move Rearward, use either of the following:

 Use your right thumb to push the right side of the throttle control lever.

 Use your left hand ﬁ ngers to pull back on the left side of the throttle control lever.

Release the throttle control lever and allow your scooter to come to a complete stop before engaging the other side

of the lever. When the throttle control lever is completely released, it automatically returns to the center “stop”

position and engages your scooter’s brakes.

Speed Adjustment Dial

This dial allows you to preselect and limit your scooter’s top speed.

 The image of the tortoise represents the slowest speed setting

 The image of the hare represents the fastest speed setting.

Full-size Scooter Series 9

II. YOUR SCOOTER

Battery Condition Meter

When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approximate

battery voltage strength. For further information on battery charging, see III. “Batteries and Charging.”

Status LED

The status LED alerts you to electrical problems that may occur with the scooter. The LED remains constantly lit

while your scooter is on. If your scooter develops an electrical problem, the status LED will ﬂ ash a code. See VII.

“Basic Troubleshooting” for ﬂ ash codes.

Key Switch

 Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.

 Turn the key counterclockwise to power down (turn off) your scooter.

WARNING! When faced with an emergency situation, switch off the key to power off the scooter.

Use caution. Be advised that turning off power to the scooter may cause the scooter to stop

abruptly. To release the emergency stop and restore driving capability to the scooter, release

the throttle control lever and then switch on the key to the scooter.

WARNING! If the key is turned to the “off” position while your scooter is in motion, the electronic

brakes will engage and your scooter will come to an abrupt stop.

Mirror Positioning and Adjustment

For information on positioning and adjusting your mirror, see V. “Comfort Adjustments.”

Tiller Angle Adjustment

For information on positioning and adjusting your tiller, see V. “Comfort Adjustments.”

Handbrake Lever

This lever provides you with emergency stopping power. When

in motion, release the throttle control lever and gently squeeze the

handbrake lever to come to a stop.

The handbrake can be locked and used as a parking brake by squeezing the

handbrake lever fully and moving the brake lock to the locked position.

See ﬁ gure 1. To release the brake lock, fully squeeze the handbrake.

WARNING! The handbrake is intended for use as an

emergency brake and/or parking brake only.

Off-board Charger Port

The off-board charger power cord plugs into this port during battery

charging. The off-board charger port is located on the tiller. See ﬁ gure 2.

Electrical System Fuses

Your scooter is equipped with a series of electrical system fuses, which

help protect the off-board charging system, key switch and lighting system

from receiving an overload of electrical current. These fuses are the same

type used in automobiles and are located in a compartment on the tiller.

See ﬁ gure 2. See VIII. “Care and Maintenance” for fuse replacement.

NOTE: Keep all electrical areas clean and free of moisture and

foreign material.

IDENTIFICATION KEY

1. OFF-BOARD CHARGER PORT

2. OFF-BOARD CHARGER FUSE

3. KEY SWITCH FUSE

4. LOWER HEADLIGHT FUSE

5. REAR TAIL LIGHTS FUSE

6. LEFT TURN SIGNAL FUSE

7. RIGHT TURN SIGNAL FUSE

1

2

4

6

7

5

3

Figure 2. Off-board Charger Port/Tiller

Console Fuses

10 Full-size Scooter Series

TILLER CONSOLE: LCD CONTROL PANEL

The tiller console and lower tiller house all of the controls needed to drive your scooter, including the LCD control

panel, throttle control levers, key switch, and the throttle control lever switch. See ﬁ gure 3.

PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console

does become exposed to moisture, do not attempt to operate your scooter until the tiller console

has dried thoroughly.

Horn Buttons

These buttons activate a warning horn. Your scooter

must be powered up for the horn to be operational. Do

not hesitate to use the warning horn when doing so

may prevent accident or injury.

Turn Signal Buttons

 Press the appropriate turn signal button once to

activate it. The turn signal will ﬂ ash on the LCD

screen.

 Press the same signal button to turn it off.

NOTE: The turn signals are timed to shut off after

15 seconds. A warning beep will sound as long as the

turn signal is on. See ﬁ gure 5 for volume control.

Lights Button

 Press the lights button once to activate the lighting

system. The light symbol will be shown on the

LCD screen.

 Press the lights button again to turn the lighting

system off.

WARNING! Scooter users are required

to use their lights when visibility is

restricted—day or night.

LCD Screen and Control Panel Settings

The LCD control panel offers easily intuited feedback

information via the LCD screen. See ﬁ gure 3. The

LCD screen is also used during the set-up (activation)

of the various control panel settings.

II. YOUR SCOOTER

IDENTIFICATION KEY

1. HORN BUTTON

2. TURN SIGNAL BUTTONS

3. LIGHTS BUTTON

4. LCD SCREEN

5. SET BUTTON

6. HAZARD LIGHTS BUTTON

7. MODE BUTTON

8. HI-LOW BUTTON

9. SPEED ADJUSTMENT

(INCREASE)

10. SPEED ADJUSTMENT

(DECREASE)

11. THROTTLE CONTROL

10

9

8

2

3

1

2

7

6

5

4

11

Figure 3. LCD Control Panel - Style B

Full-size Scooter Series 11

Hazard Lights Button

This button activates the 4-way yellow ﬂ ashers on your scooter.

 Press the button once to turn on the ﬂ ashers.

 Press the button again to turn off the ﬂ ashers.

NOTE: The 4-way ﬂ ashers will ﬂ ash and a warning beep will sound as long as the hazard lights are on. See

ﬁ gure 5 for volume control.

Mode Button

Use the mode button to scroll between the odometer, tripometer, temperature, and clock.

High-Low Button

This button toggles the scooter’s speed between HIGH and LOW.

 Press the High-Low button once to set the speed adjustment to High. The High-Low indicator will display on

the LCD screen. See ﬁ gure 4. Using this setting in conjunction with the speed adjustment buttons will allow

the scooter to achieve speeds up to the maximum preprogrammed speed for the scooter.

 Press the High-Low button again to set the speed adjustment to Low. The High-Low indicator will not display

on the LCD screen. Using this setting in conjunction with the speed adjustment buttons will allow the scooter

to achieve speeds up to the half the maximum preprogrammed speed for the scooter.

Speed Adjustment Buttons

These adjustment buttons enable you to pre-select and limit your scooter’s speed. This is indicated by the maximum

speed indicator on the LCD screen. See ﬁ gure 4.

 Press the image of the tortoise to decrease the speed of the scooter.

 Press the image of the hare to increase the speed of the scooter.

NOTE: The more bars shown on the maximum speed indicator, the faster your pre-selected maximum speed

will be. See ﬁ gure 4.

Throttle Control Levers

These levers allow you to control the forward speed and the reverse speed of your scooter up to the maximum

speed you preset with the speed adjustment buttons. A throttle control lever is located on the underside of the left

and right side of the tiller handle. See Figure 3.

To Move Forward:

 Squeeze the rear part of the throttle control lever.

To Move Rearward:

 Squeeze the front part of the throttle control lever.

Release the throttle control lever and allow your scooter to come to a complete stop before engaging the other side

of the lever. When the throttle control lever is completely released, it automatically returns to the center “stop”

position and engages your scooter’s brakes.

II. YOUR SCOOTER

12 Full-size Scooter Series

II. YOUR SCOOTER

LCD SCREEN AND CONTROL PANEL SETTINGS

The LCD control panel offers easily intuited feedback information via the LCD screen. See ﬁ gure 4. The LCD

screen is also used during the set-up (activation) of the various control panel settings. See chart 1.

IDENTIFICATION KEY

1. BATTERY CONDITION INDICATOR

2. LIGHTS INDICATOR

3. SPEED/ERROR CODE/VOLUME

4. HI-LOW INDICATOR

5. UNIT INDICATOR

6. MAXIMUM SPEED INDICATOR

7. RIGHT TURN INDICATOR

8. AM/PM

9. CLOCK

10. TEMPERATURE

11. DISTANCE/TIME/TEMP/ERROR MESSAGE

12. TRIPOMETER

13. ODOMETER

14. LEFT TURN INDICATOR

13

14

7

1012 11 9 8

6

54

3

2

1

Figure 4. LCD Screen

Full-size Scooter Series 13

SETTING INFORMATION CHART

SETTING CODE INFORMATION

Odometer

ODO

Measures mph, km/h, and hours of use. Also displays total distance traveled

over life of scooter. (Cannot be reset.)

Tripometer

TRIP

Displays trip distance traveled. Can be reset to “0”.

Temperature

TEMP

Displays current temperature in °F or °C.

Clock Displays time in 12-hour (AM/PM) or 24-hour.

SETTING ODO TRIP TEMP

OPERATION

Press the MODE

button until ODO

option appears.

Press the MODE

button until TRIP

option appears.

Press the MODE

button until TEMP

option appears.

Press and hold MODE button until the clock

symbol appears on screen.

SELECTION

Press and hold SET,

then simultaneously

press the MODE

button until the

setting option

flashes. Scroll

through the options

by pressing the SET

button.

Press and hold

SET, then

simultaneously

press the MODE

button for 2

seconds and

release. Press and

hold SET until

Tripometer resets

to 0.0.

Press and hold SET,

then simultaneously

press the MODE

button until the

setting option ﬂ ashes.

Scroll through the

options (°F or °C) by

pressing SET button.

Press and hold SET, then simultaneously press

the MODE button until the hour digit ﬂ ashes.

Use the SET button to increase the hour to the

correct number. Continue to use the MODE

and SET buttons to program the minutes and

AM/PM setting.

EXIT

When desired option

flashes, press any

button except SET

to exit.

Press any button

except SET to exit.

When your choice is

ﬂ ashing, press any

button except SET to

exit.

Press any button except MODE or SET to exit.

II. YOUR SCOOTER

Chart 1. LCD Control Panel Information

Chart 2. LCD Control Panel Information

Press MODE until the setting you want to change appears on the LED screen. Press and hold SET then follow

the steps corresponding to your setting in chart 2.

Battery Charging Mode

During battery charging, the console will display the clock and the battery condition indicator.

Battery Condition Indicator

When the key is turned to the “on” position, this LED indicator gives an approximate reading of battery strength.

When the scooter’s battery voltage reaches a low enough level, a warning beep will sound once, indicating the

batteries need charging. The warning beep will not sound again until the scooter is restarted or the throttle control

lever is pressed.

14 Full-size Scooter Series

II. YOUR SCOOTER

Maximum Speed Indicator LED

The maximum speed indicator displays the maximum

speed selected with the speed adjustment buttons. The

more bars that are lit, the faster the speed. The maximum

scooter speed will be determined by the HIGH-LOW

setting, which limits the maximum speed to half when

set to LOW. The actual travel speed will be shown in

the speed display on the LCD screen.

Volume Control

The volume of the hazard lights, horn, low voltage,

turn signals, and error message beeps can be increased,

decreased, or turned off separately. See ﬁ gure 5.

To set the volume:

1. Ensure the key is in the “off” position.

2. Press the appropriate two buttons simultaneously

(see chart 3), and turn the key to the “on” position.

3. Once the volume control screen appears, release the

buttons.

4. Press the hare button to increase the volume and the

tortoise button to decrease the volume of the beep

(0 indicates off and 4 indicates the loudest volume).

5. To exit, press any button except the hare or tortoise.

NOTE: The error message language option is set the

same way as the volume.

IDENTIFICATION KEY

1. VOLUME/LANGUAGE OPTION

2. FUNCTION INDICATOR

1

2

Figure 5. Volume Control Display

Chart 3. Volume Control Information

FUNCTION BUTTONS FUNCTION INDICATOR

Hazard Lights SET + HAZARD LIGHTS SET 1

Horn SET + HORN SET 2

Low Voltage SET + LEFT TURN INDICATOR SET 3

Turn Signals SET + RIGHT TURN INDICATOR SET 4

Error Message

Language

Option

SET + LIGHTS

SET 5

6 - Spanish

5 - Italian

4 - French

3 - German

2 - Dutch

1 - English

0 - Close

Full-size Scooter Series 15

II. YOUR SCOOTER

Off-board Charger Port

The off-board charger power cord plugs into this port during battery charging. The off-board charger port will be

located on the tiller. See ﬁ gure 6.

Electrical System Fuses

For information and a complete description of the fuse system, see ﬁ gure 2.

Tiller Adjustment Lever or Tiller Adjustment Knob

See V. “Comfort Adjustments”.

Key Switch

 Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter. See ﬁ gure 6.

 Turn the key counterclockwise to power down (turn off) your scooter.

WARNING! When faced with an emergency situation, switch off the key to power off the scooter.

Use caution. Be advised that turning off power to the scooter may cause the scooter to stop

abruptly. To release the emergency stop and restore driving capability to the scooter, release

the throttle control lever and then switch on the key to the scooter.

WARNING! If the key is turned to the “off” position while your scooter is in motion, the electronic

brakes will engage and your scooter will come to an abrupt stop!

Throttle Control Lever Switch

This switch dictates which throttle control lever (left or right) will function. See ﬁ gure 6.

 Toggle the switch to the left to activate the left throttle control lever.

 Toggle the switch to the right to activate the right throttle control lever.

NOTE: Only one throttle control lever will function at a time.

Water Bottle Holder

The water bottle holder is intended to hold a standard size, plastic water bottle. The holder can be attached to

either side of the scooter using the supplied hardware.

LOWER TILLER (available on models 614 and 714 only)

IDENTIFICATION KEY

1. OFF-BOARD CHARGER PORT

2. FUSE PANEL

3. TILLER ADJUSTMENT KNOB

4. KEY SWITCH

5. THROTTLE CONTROL LEVER SWITCH

6. WATER BOTTLE HOLDER

7. MIRROR

Figure 6. Lower Tiller Components

6

2

1

3 5 4

7

16 Full-size Scooter Series

II. YOUR SCOOTER

REAR COMPONENTS

The manual freewheel lever, anti-tip wheels (if equipped), motor/transaxle assembly, and optional safety ﬂ ag

brackets are located on your scooter as shown. See ﬁ gure 7. The main circuit breaker (reset button) and batteries

(not shown) are also located on the rear component section of your scooter.

WARNING! Before placing your scooter into or taking it out of freewheel mode, remove the key

from the key switch. Never sit on a scooter when it is in freewheel mode. Never put a scooter in

freewheel mode on any incline.

MANUAL FREEWHEEL LEVER

Whenever you need or want to push your scooter for short distances, you can put it in freewheel mode.

1. Remove the key from the key switch.

2. Push forward on the manual freewheel lever to disable the drive system and the brake system. This will enable

you to push the scooter.

3. Pull back on the manual freewheel lever to reengage the drive and the brake systems and take your scooter

out of freewheel mode.

WARNING! When your scooter is in freewheel mode, the braking system is disengaged.

 Disengage the drive motors only on a level surface.

 Ensure the key is removed from the key switch.

 Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on a

scooter to do this.

 After you have ﬁ nished pushing your scooter, always return it to the drive mode to lock the

brakes.

NOTE: If the scooter is placed in freewheel mode (manual freewheel lever forward) while the key is in the

“on” position, the scooter will not run until the manual freewheel lever is pushed backward and the key is

turned to the “off” position, then back to the “on” position.

MOTOR/TRANSAXLE ASSEMBLY

The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your scooter’s

batteries into the controlled mechanical energy that drives the scooter’s wheels.

Figure 7. Rear Components

IDENTIFICATION KEY

1. MANUAL FREEWHEEL LEVER

2. MOTOR/TRANSAXLE ASSEMBLY

3. ANTI-TIP WHEELS (if equipped)

4. SAFETY FLAG BRACKETS

3

2

3

2

1

4

1

A B

Full-size Scooter Series 17

II. YOUR SCOOTER

Anti-Tip Wheels (If equipped)

The anti-tip wheels are an integral and important safety feature of your scooter. They are bolted to the frame at

the rear of the scooter.

PROHIBITED! Do not remove the anti-tip wheels or modify your scooter in any way that is not

authorized by your Provider.

WARNING! The anti-tip wheels may cause interference with the smooth transition of your scooter

when ascending or descending a curb. Contact your authorized Provider for more information.

Batteries

The batteries store electrical energy that powers your scooter. See

III. “Batteries and Charging” for information on how to charge

your scooter batteries.

Safety Flag Bracket (Optional — Models 613/713/713ES)

Accessory brackets for installing an optional safety ﬂ ag are

mounted at the rear of the scooter. See ﬁ gure 7.

To install the safety ﬂ ag:

1. Remove the cap from the top of the bracket.

2. Insert the ﬂ ag pole into the opening.

Main Circuit Breaker

When the voltage in the batteries becomes low or your scooter

is heavily strained because of excessive loads, the main circuit

breaker may trip to protect the motor and electronics from damage.

When the breaker trips, the entire electrical system shuts down. See

ﬁ gure 8.

 Three types:

1. Reset lever ﬂ ips down when the breaker trips.

2. Reset button pops out when the breaker trips.

3. Automatic reset type will reset itself after approximately

a minute or so.

 Allow a minute or so for the electronics to “rest.”

 Push the reset lever up until you hear a click, or push in the

reset button to reset the breaker.

 If the breaker trips frequently, you may need to charge the

batteries more often or have your authorized Provider perform

a load test on the batteries.

 If the main circuit breaker trips repeatedly, see your authorized

Provider for service.

IDENTIFICATION KEY

1. LEVER STYLE

a. reset lever

b. manual shut-off button

2. RESET BUTTON STYLE

3. AUTOMATIC RESET STYLE

(MODELS 614 OR 714)

Figure 8. Main Circuit Breaker

1

a b

2

3

18 Full-size Scooter Series

II. YOUR SCOOTER

NOTE: If the scooter is placed in freewheel mode (manual

freewheel lever forward) while the key is in the “on”

position, the scooter will not run until the manual freewheel

lever is pushed backward and the key is turned to the “off”

position, then back to the “on” position.

SECUREMENT POINTS

Always secure the scooter in a forward-facing position in

the vehicle. Attach the four tie-down straps to the designated

securement points. See ﬁ gures 9 and 10. Tighten the straps

to sufﬁ ciently remove all slack. Never attach tie-downs to

adjustable, moving, or removable parts of the scooter such as

armrests, shrouds, and wheels. These items should be removed.

Position the anchor points for the rear tie-down straps directly

behind the rear securement points on the scooter. The front

tie-down straps should anchor to ﬂ oor points that are spaced

wider than the scooter to provide increased lateral stability.

WARNING! Ensure scooters are properly

secured to the motor vehicle during transport.

Scooters that are not properly secured can

become a hazard to the user and to other

vehicle passengers in the event of a crash,

sudden stopping, or swerving, as the scooter

could tip or slide out of place.

IDENTIFICATION KEY

1. MODELS 613, 713, AND 713ES

2. MODELS 614 AND 714

1. 3-WHEEL MODELS

2. 4-WHEEL MODELS

Figure 9. Rear Securement Points (Identiﬁ ed

with black dots)

1

2

Figure 10. Front Securement Points (Identiﬁ ed with black dots)

IDENTIFICATION KEY

2

1

2

Full-size Scooter Series 19

III. BATTERIES AND CHARGING

BATTERIES AND CHARGING

Your scooter requires two long-lasting, 12-volt, deep-cycle batteries that are sealed and maintenance free. They

are recharged by an off-board charging system.

 Charge your scooter’s batteries for at least 8 to 14 hours prior to using it for the ﬁ rst time.

 Keep the batteries fully charged to keep your scooter running smoothly.

READING YOUR BATTERY VOLTAGE

The battery condition meter on the tiller console indicates

the approximate strength of your batteries using a color

code. From right to left, green indicates fully charged

batteries, yellow indicates a draining charge, and red

indicates that an immediate recharge is necessary. See

ﬁ gure 11. To ensure the highest accuracy, the battery

condition meter should be checked while operating

your scooter at full speed on a dry, level surface. For

models with the LCD screen, please refer to the “Battery

Condition Indicator” section on page 13.

Figure 11. Battery Condition Meter

CHARGING YOUR BATTERIES

PROHIBITED! Removal of grounding prong can create electrical hazard. If necessary, properly

install an approved 3-pronged adapter to an electrical outlet having 2-pronged plug access.

PROHIBITED! Never use an extension cord to plug in your battery charger. Plug the charger

directly into a properly wired standard electrical outlet.

PROHIBITED! Do not allow unsupervised children to play near the scooter while the batteries

are charging. We recommend that you do not charge the batteries while the scooter is occupied.

MANDATORY! Read the battery charging instructions in this manual and in the manual supplied

with the battery charger before charging the batteries.

WARNING! Explosive gases may be generated while charging the batteries. Keep the scooter and

battery charger away from sources of ignition such as ﬂ ames or sparks and provide adequate

ventilation when charging the batteries.

WARNING! You must recharge your scooter’s batteries with the supplied off-board charger. Do

not use an automotive-type battery charger.

WARNING! Inspect the battery charger, wiring, and connectors for damage before each use.

Contact your authorized Provider if damage is found.

WARNING! Do not attempt to open the battery charger case. If the battery charger does not

appear to be working correctly, contact your authorized Provider.

WARNING! If the battery charger is equipped with cooling slots, then do not attempt to insert

objects through these slots.

WARNING! Be aware that the battery charger case may become hot during charging. Avoid skin

contact and do no place on surfaces that may be affected by heat.

WARNING! If your battery charger has not been tested and approved for outdoor use, then do

not expose it to adverse or extreme weather conditions. If the battery charger is exposed to

adverse or extreme weather conditions, then it must be allowed to adjust to the difference in

environmental conditions before use indoors. Refer to the manual supplied with the battery

charger for more information.

1b1a

20 Full-size Scooter Series

III. BATTERIES AND CHARGING

Follow these easy steps to charge the batteries:

1 2

4 5 6

8-14H

3

Figure 12. Battery Charging Procedures Diagram

WARNING! The LED lights on the charger indicate different charger conditions at various times.

If the LED does not indicate that charging is complete within 24 hours, unplug the charger

from the outlet and contact your Provider. Refer to the operating instructions supplied with the

charger for a complete explanation of these indicators.

NOTE: There is a charger inhibit function on your scooter. The scooter will not run and the battery condition

meter will not operate while the batteries are charging.

FREQUENTLY ASKED QUESTIONS

How does the charger work?

When your scooter’s battery voltage is low, the charger works harder, sending more electrical current to the batteries

to bring up their charge. As the batteries approach a full charge, the charger sends less and less electrical current.

When the batteries are fully charged, the current sent from the charger is at nearly zero amperage. Therefore, when

the charger is plugged in, it maintains the charge on your scooter’s batteries, but does not overcharge them. Refer

to the manual supplied with the battery charger for charging instructions.

Can I use a different charger?

Chargers are selected precisely for particular applications and are especially matched to the type, size and

chemical formulation of speciﬁ c batteries. For the safest and most efﬁ cient charging of your scooter’s batteries

we recommend only use of the charger supplied as original equipment with your product. Any charging method

resulting in batteries being charged individually is especially prohibited.

What if my scooter’s batteries won’t charge?

 Ensure the red (+) and black (-) battery cables are connected properly to the battery terminals.

 Ensure both ends of the charger power cord are inserted fully.

La page est en cours de chargement...

Pride FULL-SIZE 613 Le manuel du propriétaire

Ce manuel convient également à

Pride FULL-SIZE 613 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents