Philips AX1001-00Z Le manuel du propriétaire

Catégorie
Lecteurs DVD
Taper
Le manuel du propriétaire

Ce manuel convient également à

Portable CD player
AX1000
AX1001
DIGITAL AUDIO
COMPACT
BASS
BASS
BASS
DIGITAL
DYNAMIC BASS BOOST
MODE
PROGRAM
CD REWRITABLE COMPATIBLE
PROGRAMMABLE CD PLAYER
PROGRAM
DBB
PROGRAM
DBB
Ultra Basic /01 eng 22/11/00 9:22 Page 1
Es necesario que lea cuidadosamente su instructivo de manejo.
Descripción: Tocadiscos de CD portatil
Modelo: AX 1000/01, AX 1000/16,
AX 1001/01, AX 1001/16
Alimentación: 110–127/220–240 V~ 50–60 Hz
Consumo: 4 W (AY 3170)
Importador: Philips Mexicana, S.A. de C.V.
Domicilio: Norte 45, # 669, Col. Industrial Vallejo
Localidad y Telefono: C.P. 02300 México D.F., Tel. 5728 4200
Exportador: Philips Electronics Hong Kong, Ltd.
País de Origen: China
Nº de Serie: ______________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
No abrir, riesgo de choque eléctrico
Verifique que el voltaje de alimentación
sea el requerido para su aparato
ATENCIÓN
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
PRECAUCIÓN - ADVERTENCIA
México
Ultra Basic /01 eng 22/11/00 9:22 Page 2
3
1
2
3
4
5
6
7
8
9
0
Ultra Basic /01 eng 22/11/00 9:22 Page 3
4
Ultra Basic /01 eng 22/11/00 9:22 Page 4
5
English
Français
Español
English
Controls .................................................6
Quick start .............................................7
Power supply.....................................8–9
CD play..........................................10–11
Features.........................................12–15
Troubleshooting.............................16–17
General information ............................18
Français
Informations générales .......................19
Commandes.........................................20
Mise en service rapide........................21
Alimentation électrique ................22–23
Lecture CD.....................................24–25
Caractéristiques ............................26–29
Pannes et remèdes .......................30–31
Español
Controles .............................................32
Encendido rápido.................................33
Alimentación eléctrica..................34–35
Reproducción de un CD.................36–37
Características ..............................38–41
Localización de averías.................42–43
Información general ............................44
Guarantees
Polizia de garantía
Mexico.........................................58–59
Philips product warranty for
Australia......................................60–61
Guarantee and service for
New Zealand ....................................62
Garantia e Assistência Técnica
Brasil..................................................63
General information ............................45
Controls ...............................................46
Quick start ...........................................47
Power supply.................................48–49
CD play..........................................50–53
Features.........................................54–55
Troubleshooting.............................56–57
Ultra Basic /01 eng 22/11/00 9:22 Page 5
CONTROLS, refer to the illustration on page 3
6
1 MODE..............selects the different playing possibilities: SHUFFLE,
SHUFFLE REPEAT ALL, REPEAT and REPEAT ALL
2 BASS...............switches the bass enhancement on and off. This button also
switches acoustic feedback (the beep) on/off when it is pressed for
more than 2 seconds
3 2;...................switches the player on, starts or pauses CD play
4 9 .....................stops CD play, clears a program or switches the player off
5 ........................display
6 ....................skips and searches CD tracks backwards
7 §....................skips and searches CD tracks forwards
8 OPEN 2...........opens the CD lid
9 VOL E.........adjusts the volume
0 p/LINE OUT....3.5 mm headphone socket, socket to connect the player to another
audio input of an additional appliance
! OFF ..................switches RESUME and HOLD off
RESUME..........stores the last position of a CD track played
HOLD...............locks all buttons
@ PROGRAM.......programs tracks and reviews the program
# 4.5V DC...........socket for external power supply
$ ........................typeplate
% ........................battery compartment
English
This set complies with the radio interference requirements of the
European Community.
Ultra Basic /01 eng 22/11/00 9:22 Page 6
7
English
1 OPEN 2
3 CD 4 5
HOLDOFF
6 7 VOLUME
!!!
AA
LR6
UM3
1.
2.
2.
1.
PLAY
p /LINE OUT
p
/
L
I
N
E
O
U
T
O
F
F
R
E
S
U
M
E
H
O
L
D
p /LINE OUT
QUICK START
Ultra Basic /01 eng 22/11/00 9:22 Page 7
English
POWER SUPPLY
8
You can use the following batteries with this CD-player:
normal batteries type LR6, UM3 or AA (preferably Philips), or
alkaline batteries type LR6, UM3 or AA (preferably Philips).
Note: – Old and new or different types of batteries should not be used in
combination. Remove batteries if they are empty or if the player is
not going to be used for a long time.
Inserting batteries
Open the battery compartment and insert either
2 normal or alkaline batteries.
Battery indication
The approximate power level of your batteries is shown
in the display.
If is shown or flashing (depending on the
version) and bAtt is displayed, the batteries are
empty.
Average playing time of batteries under normal conditions
Battery type Playing time
Normal 7 hours
Alkaline 20 hours
Batteries contain chemical substances, so they should be disposed
of properly.
Batteries (supplied or optionally available)
Ultra Basic /01 eng 22/11/00 9:22 Page 8
POWER SUPPLY / GENERAL INFORMATION
9
Use only the AY 3170 adapter (4.5 V/300 mA direct
current, positive pole to the centre pin). Any other
product may damage the player.
1 Make sure that the adapter’s voltage corresponds to
the local voltage.
2 Connect the adapter to the 4.5V DC socket of the
player and to the wall socket.
Note: Always disconnect the adapter when you are not using it.
Connect the supplied headphones to the p/LINE OUT
socket of the player.
Note:
p/LINE OUT
can also be used for connecting the
player to your HiFi system (with a signal lead) or to
your car radio (with a cassette adapter or signal
lead). In both cases, the volume of the player must
be set to position 8.
Headphones HE 545
4
,
5
V
D
C
Mains adapter (supplied or optionally available)
English
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard
and it is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high that you
cannot hear what is going on around you.
Ultra Basic /01 eng 22/11/00 9:22 Page 9
CD PLAY
10
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
1 Push the OPEN 2 slider to open the CD lid.
2 Insert an audio CD, printed side up, by pressing the
CD onto the hub.
3 Close the player by pressing the lid down.
4 Press 2; to switch the player on and start playback.
y The current track number and elapsed playing
time are displayed.
You can pause playback by pressing 2;.
y The time at which playback was paused starts
flashing.
You can continue playback by pressing 2; again.
5 Press 9 to stop playback.
y The total number of tracks and the total playing
time of the CD are displayed.
6 Press 9 again to switch the player off.
To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
0
MODE
Playing a CD
English
Ultra Basic /01 eng 22/11/00 9:22 Page 10
CD PLAY
11
If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly,
nF dISC is displayed, indicating that the CD has not been finalized. In that
case, use FINALIZE on your CD recorder to complete the recording.
When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds
after pressing 2; for sound reproduction to start.
Playback will stop if you open the CD lid.
While the CD is read, 1 -:- is displayed.
Volume adjustment
Adjust the volume by using VOL E.
Bass adjustment
Press BASS to switch the bass enhancement on or
off
y is shown if the bass enhancement is
activated.
PROGRAM
MODE
Volume and bass
Playback information
English
Ultra Basic /01 eng 22/11/00 9:22 Page 11
FEATURES
12
Selecting a track during playback
Briefly press or § once or several times to skip to
the current, previous or next track.
y Playback continues with the selected track, and
the track’s number is displayed.
Selecting a track when playback is stopped
1 Briefly press or § once or several times to select
the desired track. The track number is displayed.
2 Press 2; to start CD play.
y Playback starts with the selected track.
Searching for a passage during playback
1 Keep or § pressed to find a particular passage in
a backward or forward direction.
y Searching starts while playback continues at low
volume. After 2 seconds the search speeds up.
2 Release the button when you reach the desired passage.
y Playback continues from this position.
Notes: – In SHUFFLE, SHUFFLE REPEAT ALL or REPEAT mode (see MODE chapter), or
while playing a program, searching is only possible within the particular
track.
PROGRAM
MODE
Selecting a track and searching
English
Ultra Basic /01 eng 22/11/00 9:22 Page 12
FEATURES
13
You can store up to 15 tracks to play in a program.
A single track may be stored more than once in the
program.
1 While playback is stopped, select a track with
or §.
2 Press PROGRAM to store the track.
y PROGRAM lights up; the track number
programmed and P with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press 2; to start playback of your selected tracks.
y PROGRAM is shown and playback starts.
You can review the program by pressing PROGRAM for more than 2 seconds.
y The display shows all the stored tracks in sequence.
Notes: – If you press
PROGRAM
and there is no track selected,
SELECt
is displayed.
– If you try to store more than 15 tracks,
FULL
is displayed.
Clearing the program
While playback is stopped, press 9 to clear program.
y CLEAr is displayed once, PROGRAM goes off,
and the program is cleared.
Note: The program will also be cleared if the power supply is interrupted, or if the
CD-player lid is opened, or if the set switches off automatically.
MODE
PROGRAM
Programming track numbers
English
Ultra Basic /01 eng 22/11/00 9:22 Page 13
FEATURES
14
It is possible to play tracks in random order, to repeat a single track or the entire CD.
1 Press MODE during playback as often as required in
order to activate one of the following ‘modes’. The
active mode is shown in the display.
y SHUFFLE: All tracks of the CD are played in
random order until all of them have been played
once.
y SHUFFLE REPEAT ALL: All tracks of the CD are
played repeatedly in random order.
y REPEAT: The current track is played repeatedly.
y REPEAT ALL: The entire CD is played repeatedly.
2 Playback starts in the chosen mode after 2 seconds.
To return to normal playback, press MODE repeatedly
until the display shows no active modes.
MODE
PROGRAM
Selecting different playing possibilities – MODE
English
Ultra Basic /01 eng 22/11/00 9:22 Page 14
FEATURES
15
You can interrupt playback and continue (even after an
extended period of time) from the position where
playback stopped (RESUME) and you can lock all buttons
of the set so that no action will be executed (HOLD).
Use the RESUME–HOLD–OFF slider for these functions.
RESUME – continuing from where you have stopped
1 Switch the slider to RESUME during playback to activate RESUME.
y RESUME is shown.
2 Press 9 whenever you want to stop playback.
3 Press 2; whenever you want to resume playback.
y RESUME is shown and playback continues from
where you have stopped.
To deactivate RESUME, switch the slider to OFF.
y RESUME goes off.
HOLD – locking all buttons
You can lock the buttons of the set by switching the slider to HOLD. Now, when a key
is pressed, no action will be executed. This is of use, for example, when transporting
the player in a bag. With HOLD activated, you can avoid accidental activation of other
functions.
1 Switch the slider to HOLD to activate HOLD.
y All buttons are locked. HoLd is shown when
you press any button. If the set is switched off,
HoLd will be shown only when 2; is pressed.
2 To deactivate HOLD, switch the slider to OFF.
Note: If you deactivate
HOLD
by switching the slider to
RESUME,
you will be
activating the
RESUME
function.
p
/
L
I
N
E
O
U
T
O
F
F
R
E
S
U
M
E
H
O
L
D
RESUME and HOLD
English
Ultra Basic /01 eng 22/11/00 9:22 Page 15
TROUBLESHOOTING
16
Problem Possible cause Solution
No power, Batteries
playback does Batteries inserted incorrectly Insert the batteries
not start correctly.
Batteries are empty. Change the batteries.
Contact pins are dirty. Clean them with a cloth.
Mains adapter
Loose connection Connect the adapter
securely.
nF dISC CD-RW (CD-R) is not recorded Use FINALIZE on the
indication properly. CD recorder to complete
the recording.
no dISC The CD is badly Replace or clean the CD.
indication scratched or dirty.
CD is not or incorrectly inserted. Insert a CD, label upwards.
The laser lens is steamed up. Wait until the lens has
cleared.
HoLd indication HOLD is activated. Deactivate HOLD.
and/or no reaction
Electrostatic discharge Disconnect the set from
to controls
power supply or take out
the batteries for
a few seconds.
English
WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
Ultra Basic /01 eng 22/11/00 9:22 Page 16
TROUBLESHOOTING
17
Problem Possible cause Solution
The CD skips tracks. The CD is damaged or dirty. Replace or clean the CD.
RESUME, SHUFFLE or PROGRAM is Switch RESUME, SHUFFLE
active. or PROGRAM off.
No sound or PAUSE is activated. Press 2;.
bad sound quality
Loose, wrong or dirty Check and clean
connections connections.
Volume is not adjusted. Adjust the volume.
Malfunctions due to nearness Keep the player away from
of active mobile phones active mobile phones.
Strong magnetic fields near Change the player’s position
the player or connections.
English
If a fault occurs, first check the points listed, before taking the set for repair.
If you are unable to solve a problem by following these hints, consult your dealer or
service centre.
CAUTION
Use of controls or adjustments or performance of procedures other
than herein may result in hazardous radiation exposure or other
unsafe operation.
Ultra Basic /01 eng 22/11/00 9:22 Page 17
GENERAL INFORMATION
18
Do not touch the lens A of the CD-player.
Do not expose the set, batteries or CDs to humidity,
rain, sand or excessive heat (caused by heating
equipment or direct sunlight).
You can clean the CD-player with a soft, slightly
dampened, lint-free cloth. Do not use any cleaning
agents as they may have a corrosive effect.
To clean the CD, wipe it in a straight line from the centre towards the edge using a
soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or
attach a sticker to it.
The lens may cloud over when the set is moved suddenly from cold to warm
surroundings. Playing a CD is not possible then. Leave the CD-player in a warm
environment until the moisture has evaporated.
Active mobile phones in the vicinity of the CD-player may cause malfunctions.
Avoid dropping the set as this may cause damage.
All redundant packing material has been omitted. We have done our utmost to
make the packaging easily separable into two mono materials: cardboard (box) and
polyethylene (bags, protective foam sheet).
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the disposal of
packing materials, exhausted batteries and old equipment.
Environmental information
CD-player and CD handling
English
Ultra Basic /01 eng 22/11/00 9:22 Page 18
INFORMATIONS GENERALES
19
Ne touchez jamais la lentille A du lecteur de CD.
N’exposez jamais l’appareil, les piles ou les CD à
l’humidité, à la pluie ou à une chaleur excessive
(chauffage ou lumière directe du soleil).
Vous pouvez nettoyer le lecteur de CD à l’aide d’un
chiffon doux, légèrement humide et non pelucheux.
N’utilisez pas de produits de nettoyage, car ils sont
susceptibles d’avoir un effet corrosif.
Pour nettoyer un CD, essuyez-le en ligne droite du centre vers le bord, à l’aide d’un
chiffon doux non pelucheux. Les produits de nettoyage risquent d’endommager le
disque! N’inscrivez jamais rien sur un CD ou n’y collez aucune étiquette.
La lentille peut se couvrir de buée lorsque vous faites passer brutalement l’appareil
du froid à la chaleur. Il n’est alors plus possible de lire un CD. Laissez le lecteur de
CD dans un environnement chaud jusqu’à ce que la buée s’évapore.
Le fonctionnement du lecteur de CD peut être perturbé si des téléphones portables
fonctionnent près de l’appareil.
Evitez de laisser tomber l’appareil, ce qui risquerait de l’endommager.
Tous les matériaux d’emballage superflus ont été supprimés. Nous avons fait tout
notre possible pour que l’emballage puisse être trié en deux matériaux : carton
(boîte) et polyéthylène (sachets, plaques de protection en mousse).
Votre appareil est composé de matériaux pouvant être recyclés s’il est démonté par
une firme spécialisée. Veuillez observer les règlements locaux lorsque vous
débarrassez des matériaux d’emballage, des piles usagées et de votre ancien appareil.
Informations relatives à l’environnement
Lecteur de CD et manipulation des CD
Français
Ultra Basic /01 eng 22/11/00 9:22 Page 19
COMMANDES,voir illustration page 3
20
1 MODE..............sélectionne l’une des possibilités de lecture : SHUFFLE,
SHUFFLE REPEAT ALL, REPEAT et REPEAT ALL
2 BASS...............active/désactive l’amplification des basses. Une pression de plus de
2 secondes sur ce bouton active/désactive le signal sonore (le bip)
3 2;...................allume le lecteur, démarre ou interrompt la lecture CD
4 9 .....................arrête la lecture CD, efface la programmation du CD ou éteint le
lecteur
5 ........................affichage
6 ....................recule d’une piste sur le CD ou effectue une recherche vers l’arrière
7 §....................avance d’une piste sur le CD ou effectue une recherche vers l’avant
8 OPEN 2...........ouvre le couvercle du lecteur
9 VOL E.........règle le volume
0 p/LINE OUT....prise pour casque de 3,5 mm, prise permettant de connecter le
lecteur à l’entrée audio d’un autre appareil
! OFF ..................désactive les fonctions RESUME et HOLD
RESUME..........enregistre la dernière position de lecture d’une piste de CD
HOLD...............verrouille toutes les touches
@ PROGRAM.......permet de programmer les pistes, affiche la programmation
# 4.5V DC...........prise pour alimentation extérieure
$ ........................identification du modèle
% ........................compartiment à piles
Français
Cet appareil est conforme aux normes de la Communauté
européenne en matière d’interférences radio.
Ultra Basic/01 fre 22/11/00 9:26 Page 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53

Philips AX1001-00Z Le manuel du propriétaire

Catégorie
Lecteurs DVD
Taper
Le manuel du propriétaire
Ce manuel convient également à