HIKMICRO HM-TP42-3AQF Mode d'emploi

Marque
HIKMICRO
Modèle
HM-TP42-3AQF
Taper
Mode d'emploi
Pocket Thermography Camera
Quick Start Guide
HIKMICRO Viewer Android
HIKMICRO Viewer iOS
1
English
No.
Description
Function
1
Display Switch
Key
Tap to switch to the live
view interface.
2
File Key
Tap to enter albums.
3 Settings Key
Tap to enter settings
interface.
4 Flash Light
Increase brightness and
output flashing alarm.
5 Thermal Lens
View the thermal
image.
6
Optical Lens
View the optical image.
2
No.
Description
7
Power Key
8 Capture Key
9
Tripod Mount
10
Strip Attachment Point
3
11 Indicator
Indicate the charging status of the device.
Solid red: charging normally
Flashing red: charging exception
12 Type-C Interface
13
Buzzer
Main Functions
Temperarature Measurement
With the built-in high-sensitivity IR detector
and high-performance sensor, the temperature
measurement range is -20 °C to 400 °C (- 4 °F
to 752 °F), and the temperature measurement
accuracy is ± 2 °C (± 3.6 °F) or 2%.
Image Adjustment
Several types of palettes and image modes
can be selected to meet different obervation
requirements. You can adjust the level and
span to achieve a good thermal effect for
better temperature difference analysis.
Video/Image Analysis
You can view live view, capture, and recording
via HIKMICRO Viewer App on your phone, and
analyze pictures offline, and generate a report
via HIKMICRO Analyzer (https://www.
hikmicrotech.com/en/product-c-detail/18) on
Set Alarm Rules
You can add thermography rules to measure
the max., min,. and center temperature of
the live view scene. Alarm linkages such as
audible warning and flashing alarm will be
triggered if there is temperature exception.
4
your PC.
Save and Edit Files
You can save the capture snapshots and videos
in albums. The saved files include both thermal
and optical information. You can move, delete,
or add text notes on the saved files.
User Manual
For detailed operation
guidance, please scan the QR
code and refer to the user
manual.
Legal Information
©2022 Hangzhou Microimage Software Co., Ltd. All
rights reserved.
About this Manual
The Manual includes instructions for using and
managing the Product. Pictures, charts, images and
all other information hereinafter are for description
and explanation only. The information contained in
the Manual is subject to change, without notice, due
to firmware updates or other reasons. Please find
the latest version of this Manual at the HIKMICRO
website (www.hikmicrotech.com/).
Please use this Manual with the guidance and
assistance of professionals trained in supporting the
Product.
Trademarks Acknowledgement
and other HIKMICRO’s trademarks and
logos are the properties of HIKMICRO in various
jurisdictions.
Other trademarks and logos mentioned are the
properties of their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKMICRO MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT
BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER
BASED ON BREACH OF CONTRACT, TORT
(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR
OTHERWISE, IN CONNECTION WITH THE USE OF THE
5
PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE
INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKMICRO SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING
FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKMICRO WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE
WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY,
YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT
IN A MANNER THAT DOES NOT INFRINGE ON THE
RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT
LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA PROTECTION AND
OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS
PRODUCT FOR ANY PROHIBITED END-USES,
INCLUDING THE DEVELOPMENT OR PRODUCTION
OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR
BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS
MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification
not expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
FCC compliance: This equipment has been tested
and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
6
2. This device must accept any interference
received, including interference that may cause
undesired operation.
This device has been tested and meets the FCC/ IC
RF exposure limit. SAR has been tested with 5mm
distance.
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the EMC
Directive 2014/30/EU, the RoHS
Directive 2011/65/EU
2012/19/EU (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at
designated collection points. For more
information see: www.recyclethis.info.
2006/66/EC (battery directive): This
product contains a battery that cannot
be disposed of as unsorted municipal
waste in the European Union. See the
product documentation for specific
battery information. The battery is
marked with this symbol, which may
include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to
your supplier or to a designated
collection point. For more information
see:www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B)
standards requirements.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
7
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for
the transmitter by Industry Canada. To reduce
potential radio interference to other users, the
antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.)
is not more than that necessary for successful
communication.
Conformément à la réglementation d'Industrie
Canada, le présent émetteur radio peut fonctionner
avec une antenne d'un type et d'un gain maximal
(ou inférieur) approuvé pour l'émetteur par
Industrie Canada. Dans le but de réduire les risques
de brouillage radioélectrique à l'intention des
autres utilisateurs, il faut choisir le type d'antenne
et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
L'équipement a été testé pour respecter les limites
d'exposition aux radiofréquences FCC / IC. SAR a
été testé à une distance de 5 mm.
The user manual for local area network devices
shall contain instructions related to the restrictions
mentioned in the above sections, namely that:
(i) the device for operation in the band 5150-5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
(ii) the maximum antenna gain permitted for
devices in the bands 5250-5350 MHz and
5470-5725 MHz shall comply with the e.i.r.p. limit;
and
(iii) the maximum antenna gain permitted for
devices in the band 5725-5825 MHz shall comply
with the e.i.r.p. limits specified for point-to-point
and non point-to-point operation as appropriate.
(i)Les dispositifs fonctionnant dans la bande
5150-5250 MHz sont réservés uniquement pour
une utilisation à l'intérieur afin de réduire les
risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux.
(ii) le gain d'antenne maximal autorisé pour les
appareils dans les bandes 5250-5350 MHz et
5470-5725 MHz doivent respecter le pire limiter; et
(iii) le gain d'antenne maximal autorisé pour les
appareils dans la bande 5725-5825 MHz doivent
respecter le pire limites spécifiées pour le point-à-
point et l'exploitation non point à point, le cas
échéant.
7
Safety Instruction
These instructions are intended to ensure that user
can use the product correctly to avoid danger or
property loss.
Laws and Regulations
●Use of the product must be in strict compliance
with the local electrical safety regulations.
Transportation
●Keep the device in original or similar packaging
while transporting it.
●Keep all wrappers after unpacking them for future
use. In case of any failure occurred, you need to
return the device to the factory with the original
wrapper. Transportation without the original
wrapper may result in damage on the device and
the company shall not take any responsibilities.
●Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interference.
Battery
●The built-in battery cannot be dismantled. Please
contact the manufacture for repair if necessary.
●DO NOT charge other battery types with the
supplied charger. Confirm there is no flammable
material within 2 m of the charger during charging.
●For long-term storage of the battery, make sure it
is fully charged every half year to ensure the battery
quality. Otherwise, damage may occur.
●DO NOT place the battery near heating or fire
source. Avoid direct sunlight.
●DO NOT swallow the battery to avoid chemical
burns.
●DO NOT place the battery in the reach of children.
●The battery voltage is 3.85 V, and the battery
capacity is 2100 mAh.
●The battery is certified by UL2054.
●If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
●A few device components (e.g., electrolytic
capacitor) require regular replacement. The average
lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
●Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
Power Supply
●The input voltage should meet the Limited Power
Source (3.85 VDC, 570 mA) according to the
IEC61010-1 standard. Please refer to technical
specifications for detailed information.
●Make sure the plug is properly connected to the
power socket.
●DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.
8
●If the equipment is used in a manner not specified
by the manufacturer, the protection provided by
the device may be impaired.
●We recommend you send the device back for
calibration once a year, and please contact the
local dealer for the information on maintenance
points.
Using Environment
●DO NOT expose the device to extremely hot, cold,
dusty, corrosive, saline-alkali, or damp
environments. Make sure the running
environment meets the requirement of the
device. The operating temperature shall be -10 °C
to 50 °C (14 °F to 122 °F), and the operating
humidity shall be 95% or less.
●This device can only be safely used in the region
below 2000 meters above the sea level.
●Place the device in a dry and well-ventilated
environment.
●DO NOT expose the device to high electromagnetic
radiation or dusty environments.
●DO NOT aim the lens at the sun or any other bright
light.
●When any laser equipment is in use, make sure that
the device lens is not exposed to the laser beam, or
it may burn out.
●The device is suitable for indoor and outdoor
uses,but do not expose it in wet conditions.
●The level of protection is IP 54.
●The pollution degree is 2.
Technical Support
●The https://www.hikmicrotech.com portal will
help you as a HIKMICRO customer to get the most
out of your HIKMICRO products. The portal gives
you access to our support team, software and
documentation, service contacts, etc.
Emergency
●If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the
power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road,
Xixing Subdistrict,Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products
might be subject to export controls in various
countries or regions, including without limitation,
the United States, European Union, United Kingdom
and/or other member countries of the Wassenaar
Arrangement. Please consult your professional legal
or compliance expert or local government
authorities for any necessary export license
requirements if you intend to transfer, export,
re-export the thermal series products between
different countries.
Facebook: HIKMICRO Thermography LinkedIn: HIKMICRO
Instagram: hikmicro_thermography YouTube: HIKMICRO Thermography
E-mail: info@hikmicrotech.com Website: https://www.hikmicrotech.com/
UDB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

HIKMICRO HM-TP42-3AQF Mode d'emploi

Marque
HIKMICRO
Modèle
HM-TP42-3AQF
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents