Thrustmaster TH8A SHIFTER Le manuel du propriétaire

Taper
Le manuel du propriétaire
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ITALIANO
ESPAÑOL
PORTUGUÊS
РУССКИЙ
ΕΛΛΗΝΙΚΑ
TÜRKÇE
POLSKI
ﺔﻴﺑﺮﻌﻟا
简体中文
ENGLISH
1/18
PlayStation®3 PlayStation®4 Xbox OnePC
User Manual
TECHNICAL FEATURES
A Removable gear shift knob
(not installed by default)
B Stick
C Adjustable “H-pattern (7+1)” shift plate
(installed by default)
D Adjustable “Sequential (+/-)” shift plate
(not installed by default)
E 2.5 mm Allen key (included)
F Cable and DIN connector
G Internal tensioning screw
H Adjustable clamping system
I “Screw threads” for cockpit mounting
DIN / USB Detachable DIN / USB cable
DIN / DIN Detachable DIN / DIN cable
2/18
WARNING
Before using this product, be sure to read through this manual carefully. Retain this manual for
future reference.
Warning Electric shock
* Keep this product in a dry place, and do not expose it to dust or sunlight.
* Respect the direction of insertion for connectors.
* Do not twist or pull on the connectors and cables.
* Do not spill liquid on the product or its connector.
* Do not short-circuit the product.
* Do not dismantle this product (apart from for the possible adjustments described in this manual),
do not attempt to burn the product and do not expose the product to high temperatures.
WarningInjuries due to repetitive movements
Playing with a shifter may result in muscle and joint pains. To avoid any problems:
* Avoid playing for extended periods of time.
* Take a 10 to 15 minute break after each hour of playing.
* Should you experience fatigue or pain in your hands, wrists or arms, stop playing and rest for a
few hours before starting to play again.
* If the symptoms or pains described above persist when you resume playing, stop playing and
consult your doctor.
* Verify that the base of the shifter is properly mounted, as described in the instructions found in this
manual.
WarningPinching risk in shift plate openings
* Keep out of the reach of children.
* When playing a game, never place your fingers (or any other parts of your body) in the openings in
the shift plates.
NEVER
3/18
INSTALLING THE GEAR SHIFT KNOB
1. To screw the gear shift knob (A) onto its stick (B): turn the gear shift knob clockwise.
2. To unscrew the gear shift knob: turn the knob counterclockwise.
TIGHTEN
UNTIGHTEN
MOUNTING THE SHIFTER
Mounting is optimized for any type of support:
- Tables, desks or shelves from 1 to 55 mm in thickness, via the clamping system (H).
- Cockpits, via the built-in “screw threads” (the clamping system is removable).
Mounting the shifter on a table or desk
1. Place the nose of the shifter on a table or other flat surface.
2. To tighten: turn the clamping wheel counterclockwise.
3. To untighten: turn the clamping wheel clockwise.
UNTIGHTEN
4/18
Positioning and rotating the clamping system (can be adjusted by 360°)
1. Using the included 2.5 mm Allen key (E), very slightly unscrew the 3 screws holding the
clamping system (H) in place.
The clamping system (and therefore the entire shifter) can now be rotated manually by 360°.
2. Select your preferred position along the 360° of rotation (3 examples are shown below, among
the many other possibilities available).
Next, retighten the 3 screws holding the clamping system in place.
5/18
Mounting the shifter in a cockpit
1. Using the included 2.5 mm Allen key (E), completely unscrew and remove the 3 screws
holding the clamping system (H) in place. Detach the clamping system from the shifter.
2. Once the clamping system has been removed, screw 2 “M6” screws (not included) into the
cockpit shelf, and into 2 of the 4 small “screw threads(I) located on the underside of the shifter's
nose.
Be sure not to use “M6” screws that are too long, which may pierce
and damage the upper part of the shifter’s nose.
A shifter mounting template for cockpits is available at
http://support.thrustmaster.com. Click Racing Wheels / TH8A Shifter, and then select
Manual.
6/18
POSITIONING AND ROTATING THE SHIFT PLATES (CAN BE ADJUSTED
BY 360°)
1. Using the included 2.5 mm Allen key (E), slightly unscrew the 4 screws holding the shift plate
(C or D) in place.
The shift plate can now be rotated manually by 360°.
2. Select your preferred position along the 360° of rotation (3 examples are shown below, among
the many other possibilities available).
3. Retighten the 4 screws holding the shift plate in place.
7/18
SWITCHING FROM THE “H-PATTERN (7+1)” SHIFT PLATE
TO THE “SEQUENTIAL (+/-)” SHIFT PLATE
1. Unscrew (counterclockwise) and remove the gear shift knob (A).
2. Using the included 2.5 mm Allen key (E), completely unscrew and remove the 4 screws
holding the “H-pattern (7+1)” shift plate in place. Remove the shift plate.
During this procedure, take care not to accidentally let
any of the screws fall inside the internal mechanism.
3. Manually rotate the internal structure 90° to the right (clockwise).
Next, install the “Sequential (+/-)” shift plate.
8/18
4. Using the included 2.5 mm Allen key (E), replace and completely retighten the 4 screws holding
the “Sequential (+/-)” shift plate in place. Screw the gear shift knob back on (clockwise).
Carry out this procedure in reverse to replace the “H-pattern (7+1)” shift plate.
Notes regarding the internal structure's top cover:
J: 4 “screw threads” to attach the shift plates (C or D).
K: 2 screws which hold the internal structure in place (do not unscrew).
L: Button which automatically detects the type of shift plate used (C or D). Is pressed automatically
when the “Sequential (+/-)” shift plate is installed. Keep this area clean in order to avoid any
detection problems.
M: Slot for easier positioning of the shift plates.
9/18
ADJUSTING THE GEAR SHIFT RESISTANCE
* Only applies to the “H-pattern (7+1)” shift plate.
* Before making any adjustments, the “H-pattern (7+1)” shift plate must be installed in
its original position (please see the diagram below).
1. Using a large flat head screwdriver, place the screwdriver in the head of the internal tensioning
screw (G) located in the lower left section of the shifter’s housing.
2. To slightly increase the resistance: turn the screw clockwise.
3. To slightly decrease the resistance: turn the screw counterclockwise.
INCREASING THE RESISTANCE
DECREASING THE RESISTANCE
2 full turns are enough to go from one extreme to the other.
To avoid damaging the system:
- Stop tightening the screw when you feel strong resistance.
- Stop untightening the screw if the stick becomes loose and wobbly.
10/18
SETUP INSTRUCTIONS FOR GAME CONSOLES
PLAYSTATION®3
= With all games for PS3™, always connect(*) the TH8A shifter directly
to one of the PS3™'s USB ports (NOT to the Thrustmaster racing
wheel's base).
- Connect the TH8A shifter's DIN connector to the DIN / USB cable.
- Connect the TH8A shifter to one of your PS3™'s USB ports.
- Start the game.
The TH8A shifter can then operate with either the H-PATTERN (7+1) or SEQUENTIAL (+/-)
shift plates.
(*) Important recommendations for the PS3™ system (applicable only if
using a Thrustmaster racing wheel featuring a built-in shifter connector)
- When using the TH8A shifter's SEQUENTIAL (+/-) shift plate, you can also connect the
shifter at the back of the racing wheel using the detachable DIN / DIN cable. The TH8A shifter
is then connected to the racing wheel's UP (= R1) and DOWN (= L1) paddle shifters.
With this racing wheel, the TH8A shifter's SEQUENTIAL (+ /-) shift plate functions with 100% of
racing games PS3™ that are compatible with the racing wheel.
- Some games enable you to use two TH8A shifters simultaneously:
One TH8A shifter with an H-PATTERN (7+1) shift plate, connected to the PS3™'s USB port™
+ One TH8A shifter with a SEQUENTIAL (+/-) shift plate, connected to the back of the racing wheel
* A list of games for PS3™ that are compatible with the TH8A shifter is available here:
http://support.thrustmaster.com. Click Racing Wheels / TH8A Shifter, and then select
Games settings. This list is updated regularly.
* On PS3™ systems, we recommend that you do not use a USB hub when connecting
the racing wheel or TH8A shifter to the games console; connect the device directly to
the PS3™'s USB ports.
* Some games require that you install the latest available updates for the TH8A shifter
to function correctly (your games console must be connected to the internet).
11/18
PLAYSTATION®4
According to the PS4™ game or the racing wheel that you are using:
= Connect(*) the TH8A shifter directly to the PS4™'s USB port
- Connect the TH8A shifter's DIN connector to the DIN / USB cable.
- Connect the TH8A shifter to one of your PS4™'s USB ports.
- Start the game.
The TH8A shifter can then operate with either the H-PATTERN (7+1) or SEQUENTIAL (+/-)
shift plates.
Or
= Connect(*) the TH8A shifter directly to the Thrustmaster racing
wheel's base
(only applicable if your Thrustmaster racing wheel features a built-in shifter
connector)
- Connect the TH8A shifter's DIN connector to the DIN / DIN detachable cable.
- Connect the TH8A shifter to the shifter connector located at the back of the racing wheel's base.
- Connect your racing wheel, then start the game.
The TH8A shifter can then operate with either the H-PATTERN (7+1) or SEQUENTIAL (+/-)
shift plates.
(*) Important recommendations for the PS4™ system (applicable only if
using a Thrustmaster racing wheel featuring a built-in shifter connector)
- When using the TH8A shifter's SEQUENTIAL (+/-) shift plate, you can also connect the
shifter at the back of the racing wheel using the detachable DIN / DIN cable. The TH8A shifter
is then connected to the racing wheel's UP (= R1) and DOWN (= L1) paddle shifters.
With this racing wheel, the TH8A shifter's SEQUENTIAL (+ /-) shift plate functions with 100% of
racing games for PS4™ that are compatible with the racing wheel.
- Some games enable you to use two TH8A shifters simultaneously:
One TH8A shifter with an H-PATTERN (7+1) shift plate, connected to the PS4's USB port™
+ One TH8A shifter with a SEQUENTIAL (+/-) shift plate, connected to the back of the racing wheel
* A list of games for PS4™ that are compatible with the TH8A shifter and the relevant
connection instructions(*) (which vary according to games) are available here:
http://support.thrustmaster.com Click Racing Wheels / TH8A Shifter, and then select
Games settings. This list is updated regularly.
* On PS4™ systems, we recommend that you do not use a USB hub when connecting
the racing wheel or the TH8A shifter; connect the device directly to the PS4™'s USB
ports.
* Some games require that you install the latest available updates for the TH8A shifter
to function correctly (your games console must be connected to the internet).
12/18
XBOX ONE
= With all Xbox One games, always connect the TH8A shifter directly to
the Thrustmaster racing wheel's base (NEVER to the game console's
USB port).
- Connect the TH8A shifter's DIN connector to the DIN / DIN detachable cable.
- Connect the TH8A shifter to the shifter connector located at the back of the racing wheel's base. -
Connect your racing wheel, then start the game.
The TH8A shifter can then operate with either the H-PATTERN (7+1) or SEQUENTIAL (+/-)
shift plates.
Important note about the Xbox One:
When using the TH8A shifter's SEQUENTIAL (+/-) shift plate, the shifter is connected to the racing
wheel's UP (= RB) and DOWN (= LB) paddle shifters.
When using the TH8A shifter's SEQUENTIAL (+ /-) shift plate, the TH8A shifter functions with
100% of racing games for Xbox One that are compatible with the Thrustmaster racing wheel
for Xbox One.
* A list of games for Xbox One that are compatible with the TH8A shifter is available
here:
http://support.thrustmaster.com. Click Racing Wheels / TH8A Shifter, and then select
Games settings. This list is updated regularly.
* Some games require that you install the latest available updates for the TH8A shifter
to function correctly (your games console must be connected to the internet).
To ensure compatibility of your Thrustmaster racing wheel for Xbox One with the
TH8A shifter, you may be required to update the racing wheel's firmware with the
latest version available via PC here: http://support.thrustmaster.com. Click
Racing Wheels / TH8A Shifter, and then select Firmware.
13/18
SETUP INSTRUCTIONS FOR PC
= With all PC games(*), always connect the TH8A shifter directly to one
of the PC's USB ports.
- Connect the TH8A shifter's DIN connector to the DIN / USB cable.
- Connect the TH8A shifter to one of your PC's USB ports.
- When connected to a PC, the TH8A shifter is a Plug & Play device and is automatically detected
and installed.
- The device then appears as 'T500 RS Gear Shift' in the Windows® Control Panel.
- Click Properties to test and view the device's features.
- Start the game.
You are now ready to race!
(*) Important recommendations for PCs (applicable only if using a
Thrustmaster racing wheel featuring a built-in shifter connector)
- When using the TH8A shifter's SEQUENTIAL (+/-) shift plate, you can also connect the
shifter at the back of the racing wheel using the detachable DIN / DIN cable. The TH8A shifter
is then connected to the racing wheel's UP (= 2) and DOWN (= 1) paddle shifters.
With this racing wheel, the TH8A shifter's SEQUENTIAL (+ /-) shift plate functions with 100% of
racing games for PC that are compatible with the racing wheel.
- Some games enable you to use two TH8A shifters simultaneously:
One TH8A shifter with an H-PATTERN (7+1) shift plate, connected to the PC's USB port
+ One TH8A shifter with a SEQUENTIAL (+/-) shift plate, connected to the back of the racing wheel
* On PC, the Thrustmaster shifter is compatible with:
- all games supporting MULTI-USB and shifters.
- all wheels on the market.
* We recommend connecting your racing wheel and TH8A shifter directly to your PC's
USB 2.0 (not USB 3.0) ports, without using a hub.
* For some PC games, you must install the latest available game updates in order for
the TH8A shifter to function properly.
* For some PC games (in order to avoid any conflicts between the wheel and the TH8A
shifter), it may be necessary:
- not to map anything onto the wheel's gear shift paddles.
- to enable the “Hold button for gear” function.
14/18
MAPPING ON PC
SOFTWARE PACKAGE
A software package for PC is available here:
http://support.thrustmaster.com. Click Racing Wheels / TH8A Shifter, and then select Drivers.
- After installing the software package, you will be able to:
* check your TH8A shifter's firmware version.
* update the firmware (if necessary) with the latest available version.
* use the “BOOTLOADER Method” (to restore your shifter, in the event of loss of firmware).
* access a customized Control Panel (game controller) on PC.
* on PC, enjoy the ANALOG mode (handbrake)
ADVANCED CALIBRATION SOFTWARE
The TH8A gear shift calibration is automatically carried out.
An advanced calibration software application for PC is also available here:
http://support.thrustmaster.com. Click Racing Wheels / TH8A Shifter, and then select Software. It
allows you to adjust the gear shift travel to your convenience.
When the settings are complete, they are instantly saved into the internal gear shift memory (and
can be used on PS3™, PS4™, Xbox One and PC).
15/18
SUMMARY INSTRUCTIONS FOR CONNECTING THE TH8A SHIFTER TO
VARIOUS SYSTEMS
Connect the TH8A shifter
PS3™ Always(*) directly to the PS3™ (USB)
PS4™
According to the game or racing wheel (*) :
- Either directly to the PS4™ system (USB)
- Or at the back of the racing wheel (DIN)
XBOX ONE
Always at the back of the racing wheel
(DIN)
PC
Always
(*)
directly to the PC (USB)
(*) For more information regarding any exceptions, please refer to the
Important recommendations sections on the manual's relevant pages.
WARNING
* Never connect the TH8A shifter directly to any device other than a Thrustmaster racing wheel,
even if the device features an identical DIN connector. This could cause damage to the TH8A shifter
or the other device.
TROUBLESHOOTING
* My shifter is not functioning correctly, or seems to be improperly calibrated:
- Turn off your computer or console, disconnect your shifter, reconnect it and then restart your
game.
- In your game, under “Options/Controller”, select or set up the most appropriate configuration.
- Refer to your game's user manual or online help for more information.
- Various help topics and tips (not included in this manual), a list of compatible games, etc. are
available on the http://support.thrustmaster.com website. Click Racing Wheels / TH8A Shifter.
- On Xbox One, to ensure compatibility of your Thrustmaster racing wheel for Xbox One with the
TH8A shifter, you may be required to update the racing wheel's firmware with the latest version
available via PC here: http://support.thrustmaster.com. Click Racing Wheels / TH8A Shifter, and
then select Firmware.
16/18
CONSUMER WARRANTY INFORMATION
Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P.
97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this
Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period
which corresponds to the time limit to bring an action for conformity with respect to this product. In
the countries of the European Union, this corresponds to a period of two (2) years from delivery of
the Thrustmaster product. In other countries, the warranty period corresponds to the time limit to
bring an action for conformity with respect to the Thrustmaster product according to applicable laws
of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster
product (if no such action exists in the corresponding country, then the warranty period shall be one
(1) year from the original date of purchase of the Thrustmaster product).
Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6)
months from the date of original purchase.
Should the product appear to be defective during the warranty period, immediately contact
Technical Support, who will indicate the procedure to follow. If the defect is confirmed, the product
must be returned to its place of purchase (or any other location indicated by Technical Support).
Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s
option, be either replaced or returned to working order. If, during the warranty period, the
Thrustmaster product is subject to such reconditioning, any period of at least seven (7) days during
which the product is out of use shall be added to the remaining warranty period (this period runs
from the date of the consumer’s request for intervention or from the date on which the product in
question is made available for reconditioning, if the date on which the product is made available for
reconditioning is subsequent to the date of the request for intervention). If permitted under
applicable law, the full liability of Guillemot and its subsidiaries (including for consequential
damages) is limited to the return to working order or the replacement of the Thrustmaster product. If
permitted under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a
particular purpose.
This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered
damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any
other cause unrelated to a material or manufacturing defect (including, but not limited to, combining
the Thrustmaster product with any unsuitable element, including in particular power supplies,
rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product);
(2) if the product has been used for any use other than home use, including for professional or
commercial purposes (game rooms, training, competitions, for example); (3) in the event of failure to
comply with the instructions provided by Technical Support; (4) to software, said software being
subject to a specific warranty; (5) to consumables (elements to be replaced over the product’s
lifespan: disposable batteries, audio headset or headphone ear pads, for example); (6) to
accessories (cables, cases, pouches, bags, wrist-straps, for example); (7) if the product was sold at
public auction.
This warranty is nontransferable.
The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or
her country are not affected by this warranty.
17/18
Additional warranty provisions
During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical
Support is the only party authorized to open and/or recondition any Thrustmaster product (with the
exception of any reconditioning procedures which Technical Support may request that the
consumer carry out, by way of written instructions for example, due to the simplicity and the lack
of confidentiality of the reconditioning process and by providing the consumer with the required
spare part(s), where applicable).
Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall
not provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product
whose warranty period has expired.
In the United States of America and in Canada, this warranty is limited to the product’s internal
mechanism and external housing. In no event shall Guillemot or its affiliates be held liable to any
third party for any consequential or incidental damages resulting from the breach of any express or
implied warranties. Some States/Provinces do not allow limitation on how long an implied warranty
lasts or exclusion or limitation of liability for consequential or incidental damages, so the above
limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights which vary from State to State or Province to Province.
Liability
If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its
subsidiaries disclaim all liability for any damages caused by one or more of the following: (1) the
product has been modified, opened or altered; (2) failure to comply with assembly instructions; (3)
inappropriate or abusive use, negligence, an accident (an impact, for example); (4) normal wear; (5)
the use of the product for any use other than home use, including for professional or commercial
purposes (game rooms, training, competitions, for example). If permitted under applicable law,
Guillemot and its subsidiaries disclaim all liability for any damages unrelated to a material or
manufacturing defect with respect to the product (including, but not limited to, any damages caused
directly or indirectly by any software, or by combining the Thrustmaster product with any unsuitable
element, including in particular power supplies, rechargeable batteries, chargers, or any other
elements not supplied by Guillemot for this product).
TECHNICAL SUPPORT
http://support.thrustmaster.com
18/18
COPYRIGHT
© 2017 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of
Guillemot Corporation S.A. All other trademarks are the property of their respective owners.
Illustrations not binding. Contents, designs and specifications are subject to change without notice and
may vary from one country to another. Made in China.
ENVIRONMENTAL PROTECTION RECOMMENDATION
In the European Union: At the end of its working life, this product should not be
disposed of with standard household waste, but rather dropped off at a collection
point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for
recycling.
This is confirmed by the symbol found on the product, user manual or packaging.
Depending on their characteristics, the materials may be recycled. Through
recycling and other forms of processing Waste Electrical and Electronic Equipment,
you can make a significant contribution towards helping to protect the environment.
Please contact your local authorities for information on the collection point nearest you.
For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.
Retain this information. Colours and decorations may vary.
Plastic fasteners and adhesives should be removed from the product before it is used.
www.thrustmaster.com
*Applicable to EU and Turkey only
*
*
1/18
PlayStation®3 PlayStation®4 Xbox OnePC
Manuel de l’utilisateur
CARACTÉRISTIQUES TECHNIQUES
A Pommeau amovible
(non installé par défaut)
B Levier
C Grille « H (7+1) » orientable
(installé par défaut)
D Grille « Séquentielle (+/-) » orientable
(non installé par défaut)
E Clé Allen 2,5 mm fournie
F Câble et connecteur DIN
G Vis de tension interne
H Système de fixation orientable
I « Pas de vis » pour fixation cockpit
DIN / USB Câble détachable DIN / USB
DIN / DIN Câble détachable DIN / DIN
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249

Thrustmaster TH8A SHIFTER Le manuel du propriétaire

Taper
Le manuel du propriétaire