ZTE BLADE Q MIni Manuel utilisateur

1

Quick start guide.................................................2

Guide de démarrage rapide..............................15

Guida rapida all'uso .......................................... 29

Kurzanleitung....................................................43

Hızlı Başlangıç Kılavuzu ................................... 58

Snelstartgids ..................................................... 72

Οδηγός γρήγορης έναρξης ...............................87

Snabbguide ....................................................102

Skrócona instrukcja obsługi ............................ 115

Rövid üzembe helyezési útmutató..................129

Vodič za brzi početak......................................143

Stručný návod k použití ..................................157

Ghid de iniţiere rapidă ....................................170

Ръководство за бързо начало ...................... 184

Príručka so stručným návodom ......................198

Kratke upute ...................................................212

Краткое руководство пользователя ............. 226

2

ZTE Blade Q Mini

Quick start guide

3

LEGAL INFORMATION

No part of this publication may be quoted, repro-

duced, translated or used in any form or by any

means, either electronic or mechanical, including

photocopying and microfilm, without the prior

written permission of ZTE Corporation.

Notice

ZTE Corporation reserves the right to make

modications to print errors or update specica-

tions in this guide without prior notice.

We offer self-service for our smart terminal de-

vice users. Please visit the ZTE ofcial website

(at www.ztedevice.com) for more information on

self-service and supported product models. Infor-

mation on the website takes precedence.

Disclaimer

ZTE Corporation expressly disclaims any liability

for faults and damage caused by unauthorised

modications to the software.

Images and screenshots used in this guide may

differ from the actual product. Content in this

guide may differ from the actual product or soft-

ware.

4

Trademarks

ZTE and the ZTE logos are trademarks of ZTE

Corporation. Google and Android are trademarks

of Google, Inc. The Bluetooth

®

trademark and

logos are owned by Bluetooth SIG, Inc. and any

use of such trademarks by ZTE Corporation is

under licence. The microSD logo is a

trademark of SD-3C, LLC. Other trademarks and

trade names are the property of their respective

owners.

Version no.: R1.0

Published: 09/2013

Manual no.:079584506122

5

Getting to know your phone

Power key

• Press and hold to power on, select phone

modes, turn ight mode on/off or power off.

• Press to turn the screen display on or off.

6

Home key

• Touch to return to the home screen from any

application or screen.

• Touch and hold to activate the search

application.

Menu key

• Touch to get the options for the current

screen.

• Touch and hold to see recently used

applications.

Back key

Touch to go to the previous screen.

Volume up/Volume down

Press or hold to turn the volume up or down.

Starting up

Switch off your phone before installing or replac-

ing the battery or the SIM card. The microSD

card is optional and can be installed and re-

moved while the phone is turned on. Unmount

the microSD card before removing it.

1. Place your nger in the slot at the bottom of

the back cover to lift and remove the cover.

2. Hold the SIM card with its cut corner oriented

as shown and slip it into the card holder.

7

3. Hold your microSD card with the metal

contacts facing down and slide it into the

microSD card slot.

NOTE: Your phone may come with a pre-

installed microSD card. Some applications may

not function normally after you remove the card,

whether it is pre-installed or not.

4. Align the connectors on the phone and

the battery and slide the battery into the

compartment. Then gently press the battery

down until it is secured.

8

5. Press the cover gently back into place until

you hear a click.

Charging the battery

1. Connect the adapter to the charging jack.

Ensure that the adapter is inserted with

the correct orientation. Do not force the

connector into the charging jack.

2. Connect the charger to a standard AC power

outlet.

3. Disconnect the charger when the battery is

fully charged.

Powering your phone on/off

Make sure the battery is charged before power-

ing on.

• Press and hold the Power Key to turn on

your phone.

• To turn it off, press and hold the Power Key

to open the options menu. Touch Power off

> OK.

9

Product safety information

Do not use hand-held while driving

Do not use while refuelling

For body-worn operation, maintain a

separation of 15 mm

This device may produce a bright or

ashing light

Small parts may cause a choking

hazard

Do not dispose of it in a re

This device may produce a loud

sound

To prevent possible hearing damage,

do not listen at high volume levels for

long periods

Avoid contact with magnetic media

Avoid extreme temperatures

Keep away from pacemakers and

other personal medical devices

Avoid any contact with liquid; keep it

dry

Switch off when instructed in hospi-

tals and medical facilities

Do not attempt to disassemble

10

Switch off when instructed on aircraft

and in airports

Only use approved accessories

Switch off in explosive environments

Do not rely on this device for emer-

gency communications

Disposal of your old appliance

1. When this crossed-out

wheeled bin symbol is

attached to a product, it

means the product is covered

by European Directive

2012/19/EU.

2. All electrical and electronic

products should be disposed

of separately from the

municipal waste stream via

designated collection facilities

appointed by the government

or local authorities.

3. The correct disposal of

your old appliance will help

prevent potential negative

consequences for the

environment and human

health.

For recycling information for this product based

on the WEEE directive, please send an email to

[email protected]

11

SAR

Your mobile device is a radio transmitter and

receiver. It is designed not to exceed the limits

for exposure to radio waves recommended

by international guidelines. These guidelines

were developed by the independent scientific

organisation ICNIRP and include safety margins

designed to ensure the protection of all persons,

regardless of age and health.

The guidelines use a unit of measurement known

as Specic Absorption Rate, or SAR. The SAR

limit for mobile devices is 2 W/kg and the highest

SAR value for this device when tested was 1.16

W/kg. As mobile devices offer a range of func-

tions, they can be used in other positions, such

as on the body.

As SAR is measured using the device’s highest

transmitting power, the actual SAR of this device

while operating is typically below that indicated

above. This is due to automatic changes to the

power level of the device to ensure it only uses

the minimum power required to communicate

with the network.

12

EC DECLARATION OF

CONFORMITY

It is hereby declared that following designated

product:

Product Type: UMTS/GSM(GPRS) Digital

Mobile Phone

Model No: ZTE Blade Q Mini/Bouygues Tele-

com Bs 402/Blade Q Mini

Product Description: UMTS/GSM Mobile

Phone

Complies with the essential protection require-

ments of Directives on Radio and Telecommuni-

cation Terminal Equipment (Directive 1999/5/EC),

Restriction of the Certain Hazardous Substances

in electrical and electronic equipment (Directive

2011/65/EU), Eco-design Requirements for En-

ergy-Related Products (Directive 2009/125/EC)

and their amendments.

This declaration applies to all specimens manu-

factured identical to the samples submitted for

testing/evaluation.

Assessment of compliance of the product with

the requirements relating to Directive 1999/5/

EC was performed by American TCB (Notified

Body No.1588) and assessment of compliance

of the product with the requirements relating to

Directive 2011/65/EU was performed by Centre

Testing International Corporation SHANGHAI

LAB and Directive 2009/125/EC was performed

by EST Technology Co., Ltd. The assessments

were based on the following regulations and

standards:

13

Requirement Standard Report No.

Health and

safety

EN 50360:2001;

EN 62311:2008;

EN 62479-2010;

EN 62209-1:2006;

EN 62209-2:2010;

EN 50332-1:2000;

EN 50332-2:2003

2013SAR331;

2013TAR664;

EN 60950-1:

2006+A11: 2009+A1:

2010+A12:2011

2013SAF0154;

EMC

EN 301 489-1 V1.9.2;

EN 301 489-3 V1.4.1;

EN 301 489-7 V1.3.1;

EN 301 489-17 V2.1.1;

EN 301 489-24 V1.5.1;

EN 55013:2001+A2:

2006;

EN 55020:

2007+A11:2011

2013EMC329;

2013TAE308;

Radio

Spectrum

EN 301 511 V9.0.2;

EN 301 908-1 V5.2.1;

EN 301 908-2 V5.2.1;

EN 301 908-13 V5.2.1;

EN 300 440-1 V1.6.1:

EN 300 440-2 V1.4.1;

EN 300 328 V1.7.1;

2013FTA301;

2013FTA302;

RZA1307-

0079RF03;

RZA1307-

0079RF02;

RZA1307-

0079RF01;

2013TAR605;

2013RSE330;

RoHS IEC 62321:2008

RHS05F009

421008R01

ErP (EC) No 278/2009

ESTS-

G13022803

14

This declaration is the responsibility of the manu-

facturer:

ZTE Corporation

ZTE Plaza, Keji Road South, Hi-Tech, In-

dustrial Park, Nanshan District, Shenzhen,

Guangdong, 518057, P.R.China

Authorised person signing for the company:

Xu Feng Quality Director, ZTE Corporation

Name in block letters & position in the com-

pany

Shenzhen, 23 September 2013

Place & date Legally valid signature

This equipment may

be operated in: AT BE

CY CZ DK EE FI FR

DE GR HU IE IT LV

LT LU MT NL PL PT

SK SI ES SE GB IS

LI NO CH BG RO TR

15

ZTE Blade Q Mini

Guide de démarrage

rapide

16

MENTIONS LEGALES

Aucune partie de ce guide ne peut être extraite,

reproduite, traduite ou utilisée sous quelque

forme ou par quelque moyen que ce soit, électro-

nique ou mécanique, y compris par photocopie

ou microfilm, sans l'accord préalable écrit de

ZTE Corporation.

Avis

ZTE Corporation se réserve le droit d'apporter

des corrections aux erreurs d'impression ou de

mettre les spécications à jour sans avis préal-

able.

Nous offrons un service d'assistance autonome

aux utilisateurs de nos terminaux. Rendez-vous

sur le site ofciel de ZTE (à l'adresse http://www.

ztedevice.com) pour plus d'informations sur ce

service et les modèles concernés. Les informa-

tions disponibles sur le site Web sont prioritaires.

Limitation de responsabilité

ZTE Corporation décline toute responsabilité

pour tout problème ou dommage résultant d'une

modication non autorisée du logiciel.

Les images et captures d'écran utilisées dans

ce guide peuvent différer du produit final. Le

contenu de ce guide peut différer du produit ou

logiciel nal.

17

Marques commerciales

ZTE et les logos ZTE sont des marques com-

merciales de ZTE Corporation.

Google et Android sont des marques commercia-

les de Google, Inc.

La marque commerciale et les logos Bluetooth

®

sont la propriété de Bluetooth SIG, Inc. et sont

utilisés sous licence par ZTE Corporation.

Le logo microSD est une marque com-

merciale de SD-3C, LLC.

Toutes les autres marques commerciales et

noms commerciaux sont la propriété de leurs

détenteurs respectifs.

Version n° : R1.0

Date d'édition : 9.2013

N° du manuel : 079584506122

18

Faites connaissance avec

votre téléphone

Touche Marche-Arrêt

• Appuyez longuement sur cette touche pour

allumer votre téléphone, afcher les options

du téléphone, activer/désactiver le mode

Avion ou éteindre votre téléphone.

• Appuyez sur cette touche pour activer ou

désactiver l'afchage de l'écran.

19

Touche Accueil

• Appuyez sur cette touche pour revenir à

l'écran d'accueil depuis n'importe quelle

application ou n'importe quel écran.

• Appuyez longuement pour activer la

recherche d'une application.

Touche Menu

• Appuyez sur cette touche pour afcher les

options de l'écran actuel.

• Appuyez longuement pour afficher les

applications récemment utilisées.

Touche Retour

Appuyez sur cette touche pour revenir à l'écran

précédent.

Volume supérieur/Volume inférieur

Appuyez sur ces touches ou maintenez-les en-

foncées pour augmenter ou baisser le volume.

Démarrage

Avant d'installer ou de remplacer la batterie ou

la carte SIM, éteignez votre téléphone. La carte

microSD est en option et peut être installée et reti-

rée même si le téléphone est allumé. Vous devez

désactiver la carte microSD avant de la retirer.

1. Placez votre doigt dans la fente au bas du

cache arrière pour le soulever et le retirer.

20

2. Tenez la carte SIM en orientant sa face

biseautée comme illustré, puis faites-la

glisser dans le support de carte.

3. Insérez votre carte microSD, contacts

métalliques vers le bas, et faites-la glisser

dans son logement.

REMARQUE : votre téléphone peut être livré

avec une carte microSD préinstallée. Certaines

applications peuvent ne pas fonctionner nor-

malement après le retrait de la carte, préinstallée

ou autre.

4. Alignez les connecteurs sur le téléphone

et la batterie et faites glisser cette dernière

dans le compartiment. Puis, poussez

délicatement la batterie jusqu'à ce qu'elle

soit xée.

La page est en cours de chargement...

ZTE BLADE Q MIni Manuel utilisateur

ZTE BLADE Q MIni Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents