AR North America 8903791 Le manuel du propriétaire

Questions, problems, missing parts?

Before returning to your retailer, call (1-866-235-5112)

or email (info@arnorthamerica.com) our customer

service department. They are available from 8:00 a.m. -

5:00 p.m., CST, Monday - Friday. www.arblueclean.com

2150 PSI

Electric Pressure Washer

ASSEMBLY, CARE AND

USE INSTRUCTIONS

Model BC383HSS

READ CAREFULLY

IMPORTANT: RETAIN THESE INSTRUCTIONS

AND ATTACH RECEIPT TO MANUAL FOR FUTURE

REFERENCE.

95505-DK

WARNING: This product can expose you to

chemicals including lead, DEHP, DINP, which is

known to the State of California to cause cancer

and or lead to birth defects. For more information

go to www.P65Warnings.ca.gov

2

THANK YOU LETTER

Dear Valued Customer,

My name is Michael Schaller and I wanted to thank you on behalf of AR Blue Clean for purchasing

this AR Blue Clean electric pressure washer. We created this pressure washer from listening to

our customers for the past 10 years on how they use their pressure washer for all kinds of cleaning

projects.

I am excited to tell you that this pressure washer has a 2-year warranty：First year of the warranty

completely covers anything that may happen to it during this time. The second year of the warranty

only covers manufacturer defects. If you have any concerns or questions, please contact us at

866-235-5112 or ARBLUECLEAN.COM where you can email or chat with us. Our friendly customer

service team based here in Fridley, MN can help you with just about anything.

Lastly I would like to ask a favor, please take a moment to review this pressure washer from the place

you purchased it. I look forward to reading your comments.

Thank you and happy cleaning!

Michael Schaller

Product Manager

AR North America Inc.

140 81st Ave. NE Fridley, MN 55432

651.274.2455 cell

763.398.6091 ofce

3

TABLE OF CONTENTS

PRODUCT SPECIFICATIONS

Product Specications ...................................................................................................... 3

Package Contents ............................................................................................................. 4

Hardware Contents ........................................................................................................... 4

Safety Information ............................................................................................................. 5

Assembly Instructions ....................................................................................................... 7

Operating Instructions .....................................................................................................11

Care and Maintenance ................................................................................................... 14

Pump Saver ..................................................................................................................... 15

Troubleshooting ............................................................................................................... 16

Limited Warranty ............................................................................................................. 17

Replacement Parts List .................................................................................................. 18

SPECIFICATIONS

Model Max PSI

(lbs/sq. in.)

Rated PSI

(lbs/sq. in.)

Max GPM

(Gal/per min)

Rated GPM

(Gal/per min)

Cold

Water

Volts Frequency

(Hz)

Amps Weight

(lbs.)

BC383HSS 2150 1700 1.6 1.1 ✔120 60 13 24.7

4

PACKAGE CONTENTSPACKAGE CONTENTS

HARDWARE CONTENTS

PART DESCRIPTION QUANTITY

J Spray Gun Trigger Lock 1

K O-Ring Kit 1

L Handle 1

M Hose Hook 1

N High Pressure Foam Cannon 1

O Rotary Nozzle 1

AA Screws 4

BB Screws 2

PART DESCRIPTION QUANTITY

A Power Washer Unit 1

B Spray Gun Holster 1

C Nozzle Cleaning Wire 1

D High Pressure Hose 1

E Nozzle Tray 1

F Zinc Steel Lance 1

G Garden Hose Adapter 1

H Quick Connect Nozzles 2

I Spray Gun 1

AA

Screws

Qty. 4

E

C

D

G

B

A

AA

K

PW95824

L

M

BB

N

F

15°– Yellow

25°– Green

I

H

J

O

Note: Screw is located in

package with manual.

BB

Screws

Qty. 2

5

SAFETY INFORMATIONSAFETY INFORMATION

Please read and understand this entire manual before

attempting to assemble and operate the product.

This manual contains information that relates to

PROTECTING PERSONAL SAFETY and PREVENTING

EQUIPMENT PROBLEMS. It is very important to read this

manual carefully and understand it thoroughly before

using the product. The symbols listed below are used to

indicate this information.

DANGER

Potential hazard that will result in serious injury or

loss of life.

WARNING

Hazard that could result in serious injury or loss of

life.

CAUTION

Potential hazard that may result in moderate injury

or damage to equipment.

Note: The word “Note” is used to inform the reader of

something the operator needs to know about the tool.

WARNING

To reduce the risk of injury, the user must read

and understand the instructions before using

this product.

1. Warning – When using this product, basic

precautions should always be followed, including the

following.

2. Read all the instructions before using the product.

3. Know how to stop the product and bleed pressures

quickly. Be thoroughly familiar with the controls.

4. Keep operating area clear of persons.

5. Do not overreach or stand on unstable support. Keep

good footing and balance at all times.

6. Follow the maintenance instructions as specied in

the manual.

7. To avoid personal injury and/or damage to property

and to maximize your power washer experience,

carefully follow all of the safety tips, instructions,

warnings and safeguards and become familiar with

all of the controls. Be sure you know how to quickly

bleed off the pressure from all parts of your power

washer and how to turn off the power washer.

8. This power washer conforms to CSA and other safety

and consumer standards. DO NOT modify or rebuild

any part of your power washer.

9. DO NOT use your power washer when you are under

the inuence of alcohol or drugs. Use this power tool

carefully and only when you are alert.

10. Watch your balance and footing while using your

power washer. Surfaces become slippery when wet

and are extra slippery when using a detergent or

cleaner.

11. NEVER operate the power washer in bare feet,

sandals, or open-toed shoes.

12. When using the power washer near children, make

sure they are closely supervised by an adult to avoid

injury. NEVER let a child use the power washer.

13. Keep ngers, hands, feet and any part of your body

clear of the stream of high pressure water. The

powerful spray can cause blindness or blast holes in

the skin. It can break a window if you are too close

when you pull the trigger on the spray gun.

14. ALWAYS wear eye protection to prevent injury to

eyes when operating the power washer.

15. To avoid mishaps or injury, ALWAYS use the trigger

safety lock when not using the power washer even if

only stopping briey.

16. The power washer is equipped with a Ground Fault

Circuit Interrupter (GFCI) which greatly reduces the

chance of electric shock while the unit is in use. If

replacement of the plug or cord is needed, use only

identical replacement parts.

17. Point the spray gun in a safe direction when

beginning a power washer session.

18. Warning- NEVER spray directly at a person, animal,

electrical device or the unit itself.

19. When rst using the spray gun, hold the spray gun

and lance with two hands when pulling the trigger

(one hand to pull the trigger and the other to

stabilize the gun assembly) until you get used to the

“kickback” from the spray gun.

20. When you turn the power switch off, water pressure

may remain in the system. To discharge the

pressure, point the spray gun in a safe direction and

pull the trigger.

21. NEVER spray ammable liquids.

22. NEVER use the power washer in areas that contain

combustible dust, liquids or vapors.

23. Avoid contact of the pressure hose with sharp

objects and examine the hose regularly. Replace

if damaged. Due to the high pressure involved, it

cannot be repaired if cut or damaged.

24. Only use detergent specically formulated for power

washers and follow instructions on the detergent’s

label. Dish or laundry soap is too thick and will

clog the nozzle of your foam cannon.

6

Double Insolated Product

SAFETY INFORMATIONSAFETY INFORMATION

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Servicing of a Double-Insulated Appliance

Ground Fault Circuit Interrupter Protection:

This pressure washer is equipped with a ground-fault

circuit-interrupter (GFCI) built into the plugs of the

power-supply cord. This device provides additional

protection from the risk of electric shock. Should

replacement of the plug or cord become necessary,

use only identical replacement parts that include GFCI

protection.

In a double-insulated product, two systems of insulation

are provided instead of grounding. Grounding means

are not provided for a double insulated product, nor

should grounding means be added to the product.

Servicing a double-insulated product requires extreme

care and knowledge of the system, and should only be

done by qualied service personnel.

Replacement parts for a double-insulated product must

be identical to the original parts.

A double-insulated product is marked with the words

“Double Insulation” or “Double Insulated”. Product may

also be marked with symbol shown here.

25. Protect eyes, lungs, and skin from exposure to

detergent.

26. Warning-If connection is made to a potable water

system, the system Should be protected against

backow.

CAUTION

Store the power washer indoors to prevent the

water in the unit from expanding under freezing

conditions. When the water freezes and expands,

your power washer will be damaged and become

inoperable. Or, if storing outdoors, it is

recommended you use pump saver (not included)

to protect pumps.

27. NEVER use hot water with your power washer. It will

overheat and damage the high pressure pump.

28. NEVER leave the power washer unattended while it

is powered “ON”.

29. ALWAYS turn the water supply on before turning the

power washer power to on. Running the pump dry

will cause damage to the internal components.

30. NEVER use a water supply to your power washer

that exceeds 150 PSI maximum.

31. NEVER disconnect the high pressure hose from the

power washer while the system is pressurized.

32. NEVER permanently engage the trigger mechanism

on the spray gun.

33. NEVER operate the power washer unless all

components are properly and securely connected.

34. NEVER allow the power washer pump to run for

more than one minute after you have turned off the

water supply. This can cause the motor and pump to

overheat and fail.

35. NEVER use lances or other parts that are not

compatible for this specic AR Blue Clean unit.

36. NEVER use an extension power cord since it defeats

the effectiveness of the GFCI and increases the

chance of electrocuting the operator.

37. NEVER spray any electrical outlet with your power

washer.

38. Inspect the power cord before using. DO NOT use it

if it is damaged.

39. Stay alert - watch what you are doing.

7

PREPARATION

Before beginning assembly of product, make sure

all parts are present. Compare parts with package

contents list and hardware contents list. If any part is

missing or damaged, DO NOT attempt to assemble the

product.Please call customer service at 1-866-235-

5112. Replacement parts will be sent no charge.

Estimated Assembly Time: 5 minutes.

Tools Required for Assembly (not included): Phillips

screwdriver.

ASSEMBLY INSTRUCTIONS

PREPARATION

Power Unit Assembly

Slide the spray gun holster (B) onto left side, when

facing the power washer unit (A).

1

B

A

Screw x 1

AA

Screw

Qty. 2

2

A

E

AA

Slip tab into slot and screw the nozzle tray (E) on

bottom left, when facing the power washer unit (A).

Secure with screw (AA).

Note: DO NOT use a power screwdriver. When the screw

is completely tight, give a small nal clockwise twist of

the screwdriver. DO NOT overtighten.

Note: When placing the gun with the lance attached, the

nozzle will rest in this tray.

Hardware Used:

8

3

A

D

High Pressure Hose Assembly

Screw high pressure hose (D) clockwise onto bottom

front of power washer unit (A). Pull back collar and

insert o-ring post into water outlet far enough so

collar can thread onto outlet threads until hand tight.

If it takes fewer than six turns you have not properly

tightened the high pressure hose tting. It is easier to

position the power washer in front of you to ensure that

the threads are started correctly. Failure to properly

tighten high pressure hose will result in the hose

slipping or popping off immediately upon turning unit

on. Do not worry about damage if this occurs–just

reinstall and take extra care when screwing on the high

pressure hose tting.

Note: DO NOT use pliers or locking pliers to tighten.

3

2

4

I

D

1

D

Pull back on collar at the other end of the high pressure

hose (D). Push rmly to connect hose to spray gun (I).

Twist collar to secure. Conrm hose is locked into spray

gun by slightly pulling on them. The hose is now

securely attached to spray gun.

1

3

5

I

D

3

2

D

Twist collar then pull back to release the the high

pressure hose (D) connection from the gun (I).

6

1

I

Unlocked Locked

Locking Spray Gun (Before Lance Installation)

To lock trigger of spray gun (I), point gun away

from you and turn dial to lock (“3” and “9” position).

Squeeze or pull trigger to make sure it is locked.

ALWAYS leave in locked position when not in

use. This ensures the gun is in “safe” mode until it

is ready for use. Turn dial to unlock (“12” and “6”

position) to release spray gun trigger.

Note: The trigger lock prevents trigger from being

accidentally engaged.

ASSEMBLY INSTRUCTIONS

9

ASSEMBLY INSTRUCTIONS

2

1

7

F

I

10

A

G

Garden Hose Adapter Installation

Attach collar of garden hose adapter (G) directly to

power washer water inlet (A). Hand tighten.

Lance Installation

While spray gun (I) is in the locked position, insert

lance (F) into the end of spray gun by inserting and

turning clockwise until fully in place. To remove turn

counterclockwise.

8

F

H

O

N

Attach nozzles (H), rotary nozzle (O) or foam cannon

(N) into end of lance (F) by pressing selected nozzle into

place. It will make a “click” sound when firmly in place.

Note: Always turn the safety lock dial to lock trigger

when changing lances and nozzles to ensure that they

do not accidentally eject with force during removal.

1

2

9

F

H

O

N

To remove nozzle (H), rotary nozzle (O) or foam cannon

(N) pull back on collar of lance (F) and pull out nozzle.

10

ASSEMBLY INSTRUCTIONS

Hose hook assembly

Install hose hook (M) onto back side of handle (L).

Secure with three screws (AA).

Handle Assembly

Install handle (L) to power washer unit (A). Secure

with screws (BB).

Note: Align the hole on both metal tube and handle

before inserting the screws.

Note: DO NOT use a power screwdriver. When the

screw is completely tight, give a small nal clockwise

twist of the screwdriver. DO NOT overtighten.

12

L

A

BB

L

13

M

AA

L

Screws

x 2

x 3

BB

AA

Screw

Qty. 2

Hardware Used:

BB

Screws

Qty. 2

You have now completed assembly and are ready to

begin using your electric power washer. Read and

observe all safety instructions.

Attach garden hose to the garden hose adapter (G).

Note: Flush out garden hose before connecting

to garden hose adapter.

1

11

G

11

OPERATING INSTRUCTIONS

OFF/0

ON/I

OFF/0

ON/I

• Begin power washing by squeezing the trigger on the

spray gun all the way into the handle.

• Release the spray gun trigger to stop the power

washer.

• Allow the motor to come to a complete stop before

squeezing the trigger again.

• Squeezing rapidly will cause the auto start feature to

miss an on/off cycle that may prevent it from turning

on while squeezing trigger after rapid squeezing. Use

slow deliberate trigger pulls to avoid such symptoms.

• Always test a small area to avoid chance of damaging

the surface.

• Make sure the “ON/OFF” switch is in the “OFF”

position. The power switch has international symbols

for ‘on’ and ‘off’: On (|) Off (O).

• Unwind the power cord completely and plug the GFCI

into a grounded 120 volt outlet.

• Turn on water supply at the faucet to completely

open.

• Release safety push trigger lock up and back into

trigger. While pointing the spray gun in a safe

direction, squeeze the trigger on the spray gun until

there is a steady stream of water, letting the water

and air out of the hose. Push trigger lock back down

to lock back into place.

• Turn the power switch to the “ON” (|) position. The

unit will turn on for 1 - 2 seconds and shut off. This is

a normal function of the auto start feature. Squeeze

the spray gun trigger to begin pressure washing.

12

OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS

1

2

3 3

Operation Tips

• Note: Test the GFCI before each use:

1. Plug GFCI into power outlet. Indicator should turn

green to show that cord has power.

2. Press test button, green indicator should turn off

to verify that GFCI cut off power to the cord.

3. Press reset button – green indicator should turn

on to show that cord has power again.

4. When GFCI is working properly, green indicator

will turn on when power is applied. If green

indicator turns off, it has detected electric leakage

and the GFCI cut off power to theappliance.

• If you hear the motor run intermittently when the

trigger is not being squeezed, that is normal.

The pump is priming itself so it is ready to operate

when the trigger is squeezed. Turn off the power

washer if not being used after ve minutes.

• The o-rings on the bayonet end of the nozzle lance

should be cleaned regularly and lubricated with non-

water soluble grease such as petroleum jelly.

• Keep the nozzle cleaning wire for use in unclogging

the nozzle. If you lose the cleaning wire, a

straightened paper clip also works.

How to Avoid Damaging Surfaces

• Damage to surfaces being cleaned occurs because

the impact force of the water pressure exceeds

the durability of the surface. Bare wood can be

penetrated; paint can be peeled off, etc. You can vary

the force of your power washer by controlling:

1. The angle of the surface being cleaned.

2. The distance of the nozzle from the surface being

cleaned.

• NEVER use a narrow high pressure stream of water

on soft surfaces susceptible to damage.

• Use the 25° quick connect nozzle when cleaning

windows. Squeeze the trigger and vary the spray

pattern and angle until optimum cleaning efciency is

achieved.

Attach QC Foam Canon (stored in rear of pressure

washer) into end of lance by pressing cannon into place.

It will make a “click” sound when rmly in place.

Note: Always lock spray gun when changing the foam

cannon to ensure it does not eject with force.

• When using the foam cannon, ll it with a properly

formulated detergent or cleaner with water ratio

according to instructions on the container.

• DO NOT use thick gel-like detergents as they will clog

the power washer and can cause damage.

• The power washer will pull a ratio of water to

detergent of 10:1 or 10 parts water to 1 part

detergent. The detergent concentration can be

adjusted by turning the detergent knob on the top of

the cannon. Turn it left for more concentration or turn

it right for less concentration.

13

OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS

Extending and Lowering Handle

• Extend the handle up by pressing the red button in the

cord hook and pull handle up until it locks in place.

Note: If handle does not easily slide up, add some

petroleum jelly (not included) to help make it

glide easier.

• Lower the handle by pressing the center of the upper

cord hook and push down on the handle until all the

way down.

1 1

2

Using Power Cord

• Easily remove the power cord from side of unit by

swiveling the bottom red cord hook to the right or

left until it faces up. The power cord then can be

easily slid off of the side of the power washer unit.

• Swivel red cord hook back down when ready to

wrap the cord back into place for storage.

14

OPERATING INSTRUCTIONSCARE AND MAINTENANCE

Detergents

• Use detergents designed for power washers. These

can be purchased online at our website www.

arblueclean.com. Hardware stores or home centers

also have power washer detergents for different

cleaning projects. The cleaning solution should be

the consistency of water in order to prevent clogging

your detergent bottle and nozzle.

• This system applies detergent under low pressure.

The cleaning power of the detergents is enhanced

when applied with low pressure and enough time is

given to break down dirt and grime. The combination

of low pressure and chemical action is very effective

and can be better than scrubbing if applied properly.

ALWAYS spray detergent on a dry surface. DO NOT

pre-soak area. Wetting the surface rst dilutes

the detergent and reduces its cleaning ability. DO

NOT allow detergent to dry on surface. On vertical

surfaces being cleaned, apply detergent to lower

surfaces and work your way up to prevent detergent

from causing streaks in the dirt and grime. Rinse

detergent by pressure washing from bottom up for

same reason.

• If a stain is particularly tough, it may be necessary

to reapply the detergent and use a bristled brush to

scrub the stain. Subsequent power washing after

brushing should successfully complete your cleaning

job.

Cleaning Garden Hose Adapter

• The screen inside the adapter should be cleaned

periodically. Remove it by dragging a thumb over the

screen with enough pressure to pull the screen and

washer out. Rinse it with clean water and then place it

back in the adapter.

Cleaning Nozzles

• A clogged or partially clogged nozzle can cause

signicant reduction of water pressure coming out

of the nozzle and/or cause the unit to pulsate while

spraying.

• Turn off the unit.

• Turn off the water supply to the unit.

• Relieve any pressure trapped in the hose by

squeezing the trigger 2-3 times, and then lock the

spray gun.

• Using the nozzle tip cleaner provided (or an unfolded

paper clip), insert the wire into the nozzle hole and

move back and forth until debris is dislodged.

• Back ush water through the nozzles using garden

hose and highest pressure available (either standard

water nozzle or use your thumb over the nozzle to

create water pressure for back ush).

15

OPERATING INSTRUCTIONSCARE AND MAINTENANCE

PUMP SAVER

Pump Saver is a product that protects and prolongs

the life of the pump. This will keep the internal parts

of the pump lubricated and protected from freezing

while being stored in ALL climates. It also assists with

protection from internal corrosion. The Blue Clean part

# is: PW64511 (16oz. bottle). Order online at www.

arblueclean.com

Pump Saver Instructions

Follow the previous storage instructions for your power

washer. To prevent staining, protect the surface under

the power washer from any excess uid. Wear eye

protection when using this product.

Turn unit off and disconnect the gun before adding

pump protector. Unscrew threaded top from bottle to

remove seal and reattach threaded top to bottle.

Remove black cap from bottle.

1) Place top of pump saver bottle onto the garden hose

adapter.

2) Secure pump saver bottle by turning in a clockwise

direction.

3) Turn the power on.

4) Squeeze bottle to help it into the pump.

5) Turn power off when pump saver exits the machine’s

water outlet.

Note: Instructions on Pump Saver Bottle are generic and

not model specic.

1

2

Storage

• When your pressure washer session has been

completed, turn off the power switch located on the

front of the power washer. Unplug the power cord

from the outlet. Turn off the water supply. Pull the

trigger on the spray gun 2-3 times to drain out the

excess water and to release any remaining water

pressure. Disconnect the garden hose adapter from

the water inlet. DO NOT allow the power washer to

run with no water owing through it.

• Remove high pressure hose from spray gun.

• Remove lance from the gun. Place the gun in the

holster on the side. Lances are placed into any of

the slots in the back of the unit.

• Make sure to discard any remaining detergent

from the bottle. Residual chemical will stick to the

container which could become cotaminated, and

can cause the detergent injector to clog and not

function properly. Flush the bottle and nozzle head

with fresh water to prevent clogging.

• Hook the power cord around the cord hook on the

right side of the machine when facing it.

• The pressure hose is stored on the hose hook

located on the back of the handle.

• DO NOT store the power washer where it is

exposed to freezing temperatures unless you use

an antifreeze designed for pumps. Store the power

washer indoors to prevent the water in the unit from

expanding under freezing conditions. When the

water freezes and expands, your power washer will

be damaged and become inoperable. Or, if storing

outdoors, it is recommended you use pump saver

(not included) to protect pumps.

16

PROBLEM CORRECTIVE ACTION

Unit will not turn on. 1. The GFCI module on the end of the power cord must be plugged directly into an outlet.

2. Do not use an extension cord.

3. With the GFCI Connected make sure the power switch is turned on.

Note: When power switch is turned on, the power washer will turn on by itself for 1-2

seconds and shut off. This is normal.

The high pressure (HP)

hose will not connect/

stay connected to the

spray gun. Is this a

spray gun problem?

1. In most cases, the spray gun is not the problem. The problem is the rubber sleeve

covering the tting at the end of the high pressure hose. It has likely slipped up toward

the metal tip. To x: wiggle, twist and/or pull the rubber sleeve down until the entire tip

is visible plus an 1/8 in. of the metal tting below the tip. Now try to insert the hose tip

into the spray gun. It should “click” into place and will not come out until the hose is

released by pushing in the lever on the underside of the gun. You may cut away the end

of the sleeve with a sharp knife if unable to move the sleeve down. Be careful not to cut

or puncture the hose.

2. Do not push in the release button when connecting the high pressure hose.

The unit is running but

there is no water ow.

1. Power should NOT be turned on until water comes through the spray gun. Doing so will

damage the motor.

2. Check the water source.

3. Eject the nozzle from the lance to determine if clog is coming from the nozzle (If nozzle

is clogged, see nozzle cleaning instructions under “Cleaning nozzles”).

4. Take off the lance and just spray out of the spray gun. This will indicate if the problem is

with the lance.

5. Check Garden Hose Adapter for loose connection and the lter for debris.

Why is water leaking

where the high

pressure hose

connects to the spray

gun?

1. Make sure there is an o-ring at the end of the metal tip of the high pressure hose. If

no o-ring is present, the connection between the hose and spray gun will leak. O-Ring

Replacement Kit (K) is included with purchase. Additional O-Ring Kits are available

online at www.arblueclean.com or call Customer Service at 1-866-235-5112 to place

an order.

I can’t remove the

lance from the spray

gun. What should I

do?

1. All lances and the detergent bottles are attached and removed from the extension

lance in the same manner. Insert the quick-release end of the lance/detergent bottle

into the extension lance. Press the extension lance and lance together (about a 1/8”)

and turn clockwise. The lance will lock in place. Remove the lance by reversing this

procedure. Press the extension lance and lance together and turn counter clockwise.

The lance will slide out.

2. Or, hold the extension lance and lance in an upright position with the nozzle end on

the oor. Push the whole assembly straight down to loosen the connection, and then

follow the removal process again. You may also spray soapy water or a lubricant in the

area where the lance connects to the extension lance.

TROUBLESHOOTING

If you have any questions regarding the product, please call customer service at 1-866-235-5112.

17

TROUBLESHOOTING

PROBLEM CORRECTIVE ACTION

The power washer

turns on for

2 seconds, shuts

off, and will not turn

back on. Do I have a

defective unit?

1. It sounds like your power washer is working just ne. When the water is connected,

the accessories are assembled properly, and the power switch is turned on, the power

washer may turn on for 1 - 2 seconds to prime the pump. It automatically shuts off and

waits for the spray gun trigger to be pressed. When the trigger is pressed, water starts

owing through the pump. The water sensor in the pump “senses” the moving water

and automatically turns the power washer on.

2. Turn the power switch to off, hold in the trigger on the spray gun, so that you have a

steady stream of water. While you are holding the trigger open on the spray gun, at the

same time, turn the power switch on.

TROUBLESHOOTING

LIMITED WARRANTY

The Warranty of this product is coverd by A.R.North America.

This product has a 2 (two) year warranty. Please read the following carefully to understand what each warranty

entails:

This product is under warranty to the original retail consumer against defects in material and workmanship for a

period of 1(one) year and is a complete “bumper to bumper” warranty including the spray gun,the high pressure

hose and all accessories from the date of purchase. The warranty is not transferable or assignable.This warranty

covers replacement parts. This limited one year warranty applies only to products used in consumer applications

and is void in rental or any commercial application. Reasonable care must be used in conformity with operation and

maintenance instructions in the owner’s manual and quick start guide. Failure to follow these instructions will void

this warranty. This warranty gives you special legal rights and you may also have other rights which vary from state

to state.

The second year of the warranty only covers manufacturer defects.

Warranty Process

Keep your original receipt of purchase in case of warranty claim.

If your power washer develops a problem, contact Customer Service:

• Call our toll-free number at 1-866-235-5112. Customer Service is available Monday - Friday 8:00 a.m. to 5:00

p.m. Central Standard Time (CST). A Customer Service Representative will work with you to x the problem.

If the power washer needs to be returned for repair, shipping costs to the company must be paid by the customer. A

Return Merchandise Authorization (RMA) Number will be issued for the return. Upon receiving the power washer,

the company will repair or replace the unit. We will send unit back to customer at no charge.

Please note: Power washers sent to the company without an RMA Number will NOT be accepted and will be

shipped back at the expense of the sender.

18

REPLACEMENT PARTS LIST

Printed in China

For replacement parts, call our customer service department at 1-866-235-5112, 8 a.m. - 5:00 p.m., CST,

Monday - Friday or order online at www.arblueclean.com

PART DESCRIPTION PART #

GQuick Connect Nozzle

25˚ – Green

PW4222620

H Nozzle Tray PW4220050

I Garden Hose Adapter PW4221570

J GFCI Assembly PW4221160

K O-Ring Kit PW95824

L Gun Holster PW4220040

PART DESCRIPTION PART #

A High Pressure Foam

Cannon (34 oz.) PW4620594

B High Pressure Hose PW4222420

C Spray Gun PW4221762

D Zinc Steel Lance PW3400960

ERotary Nozzle PW4220680

FQuick Connect Nozzle

15˚ – Yellow

PW4222610

K

E

F

G

PW95824

A

D

B

15°– Yellow

25°– Green

IG

J

H

L

C

Questions, problèmes, pièces manquantes?

Avant de retourner l’appareil chez le marchand, Appe-

lez (1-866-235-5112) ou par courriel (info@arnortha-

merica.com) notre département customerService. Ils

sont disponibles de 8 h à 17 h, HNC, du lundi au ven-

dredi.www.arblueclean.com

2150 PSI

LAVEUSE À PRESSION ÉLECTRIQUE

GUIDE D'ASSEMBLAGE,

D'ENTRETIEN ET

D'UTILISATION

Modèle BC383HSS

Lire attentivement

IMPORTANT : CONSERVER CE GUIDE ET

INSÉRER LA FACTURE DANS LE GUIDE POUR

RÉFÉRENCE ULTÉRIEURE.

95505-DK

20

TABLE DES MATIÈRES

SPÉCIFICATIONS DU PRODUIT

Spécications du produit ................................................................................................ 20

Contenu de l'emballage .................................................................................................. 21

Matériel inclus ................................................................................................................. 21

Consignes de sécurité .................................................................................................... 22

Instructions d'assemblage ............................................................................................. 24

Mode d’emploi .................................................................................................................28

Entretien et maintenance ............................................................................................... 31

Protecteur de pompe ...................................................................................................... 32

Dépannage ...................................................................................................................... 33

Garantie limitée ............................................................................................................... 34

Liste des pièces de rechange ......................................................................................... 35

SPÉCIFICATIONS

Modèle PSI maximum

(k/cm2)

(lb/po2)

PSI Évalué

(k/cm2)

(lb/po2)

Débit maximum

(Litre/min)

(Gal./min)

Débit Évalué

(Litre/min)

(Gal./min)

Eau

froide

Volts Fréquence

(Hz)

Ampères Poids

(kg)

(lb)

BC383HSS 6292

(2150)

4975

(1700)

6.1

(1.6)

4.2

(1.1)

✔120 60 13 11.2

(24.7)

La page est en cours de chargement...

AR North America 8903791 Le manuel du propriétaire

AR North America 8903791 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents