Emac NRE13S Guide d'installation

Taper
Guide d'installation

Ce manuel convient également à

TECHNICAL FILE
R03.001_09/08/2010
Novorodapie® Aluminium is a skirting with simple design, made of
anodized aluminium, whose face side has a smooth curve which
brings elegance and distinction. This skirting has been designed to
place easily, without work. This makes it ideal for rehabilitation or
reform works.
It is provided covered with protective lm to avoid stains or damage
due to holding or transport.
Available in Brico pack, bagged and labeled individually with
installation instructions.
Novorodapie® Aluminium
Material: Anodized aluminium
Lenght: 6ft5in / 2 l.m.
Dimensions: a: 2-3/4” / 70 mm.
Packaging: 10 u/box
Covered with protective lm
Finishes: 13 - Matt silver
Applications
Novorodapie® Aluminium is a skirting made of anodized aluminium. This skirting has been designed
to protect the bottom of the walls, providing at the same time a high decorative value. Novorodapie®
Aluminium is easy to install using adequate adhesives or silicones.
This skirting is available with an acoustic insulator which helps to fulll with the CTE-DB-HR (Protection
against noise inside the Spanish Technical Building Code) by reducing the level of sound.
Complementary pieces
Covers
Exterior angle
Interior angle
Novorodapie® Aluminium has complementary pieces made of Zamak for a perfect nish.
Alloy: 6063 (L-3441/38-337)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: High
Lightfastness: Excellent
Appearance and color: EN 12373-1
Technical Features
General Features
Page 1 of 3
TECHNICAL FILE
R03.001_09/08/2010
Materials
Aluminium
Novorodapie® Aluminium is a prole made by extrusion of aluminium. These proles have been
anodized, improving mainly by this proccess their corrosion and mechanical resistance and their
appearance.. The anodized applied, has the quality seal “Qualanod” which guarantees the quality of
the process and the resulting proles. This seal regulates several tests: appearance and color, thickness
measurements, sealing and impregnation control, abrasion resistance, lightfastness, acetic saline
chamber and nitric acid immersion.
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
Novorodapie® Aluminium
Zamak
The complementary pieces of Novorodapie® Aluminium are made of Zamak. Zamak is a non ferrous
alloy of Zinc with Aluminium, Magnesium and Copper (UNE EN 1774) It’s tenacious, hard hardeness and
has a high mechanical strenght and an excellent plastic deformability. The nish that is applied on to
the complementary pieces, protect them and complement the Novorodapie® Aluminium.
*For further information see the Technical Files of the materials in www.emac.es
1. Clean the internal side of Novorodapie® Aluminium and the surface where you are gonna go to
place it.
2. Join the complementary pieces with the Novorodapie® Aluminium. This previous step will make
easier the joint of the skirting to the wall. To keep the pieces together in the process, you can use
adhesive or adhesive tape as support. Take care to remove parcially the protective lm in the areas
that will be in touch with the wall.
3. In third place, spread a big amount of adhesive on the internal face of Novorodapie® Aluminium.
You can use an adhesive type MS sealing/express from Fischer or similar or, in case you are
installing the insulator skirting, use silicone.
4. Then place carefully the Novorodapie® Aluminium in the wall and press smoothly. Be sure the
complementary pieces remain correctly in their place.
5. Finally, clean the remaining adhesive and let dry. After this remove the protective lm
*If you want to paint the wall, keep the protective lm until you have nish the operation.
Placement
Page 2 of 3
1
5
6
7
2 3 4
*This graphic sequence shows how to join the pieces to install the skirting. To install the skirting with the interior angle piece,
do it in the same way with the pieces placed in opposite angle. If you prefer, you can put the cover at the end of the installation.
To see the video, capture this
image with your mobile phone
(software QR code reader is
necessary)or click on it.
TECHNICAL FILE
R03.001_09/08/2010R03.001_09/08/2010
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Technical information
Novorodapie® Aluminium
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral. If a preserving agent is applied, as well as keep a very thin layer of water repellent, note that it
can’t be yellow,attract dust or dirt or have iridescent effects.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Cleaning and maintenance
Indoors Wall tiling Recyclable
Page 3 of 3
Outdoors
  • Page 1 1
  • Page 2 2
  • Page 3 3

Emac NRE13S Guide d'installation

Taper
Guide d'installation
Ce manuel convient également à

dans d''autres langues