KitchenAid KUDF204KPA Le manuel du propriétaire

Marque: KitchenAid

Modèle: KUDF204KPA

Catégorie: Frigos

Taper: Le manuel du propriétaire

For questions about features, operation/performance, parts, accessories, or service, call: 1-800-422-1230

or visit our website at... www.kitchenAid.com

In Canada, call: 1-800-807-6777, or visit our website at... www.KitchenAid.ca

DOUBLE DRAWERS

REFRIGERATOR/FREEZER

REFRIGERATOR/REFRIGERATOR

Models: KUDR204KSB, KUDR204KPA, KUDF204KSB,

KUDF204KPA

TABLE OF CONTENTS

DOUBLE DRAWERS SAFETY .........................................2

Proper Disposal of your Old Double Drawer ......................3

DESIGN SPECIFICATIONS ..............................................3

24” Drawer Models ............................................................. 3

INSTALLATION REQUIREMENTS ...................................3

Tools and Parts .................................................................3

Location Requirements .....................................................3

Product Dimension ...........................................................4

Custom Overlay Drawer Panels .........................................5

Electrical Requirements ....................................................6

INSTALLATION INSTRUCTIONS .....................................6

Unpack the Refrigerator Drawers ......................................6

Water Supply Requirements .............................................7

Connect Water Supply ......................................................7

Move the Refrigerator Drawers to Final Location ................8

Level the Refrigerator Drawers ..........................................8

Install Custom Overlay Panel .............................................9

Complete Installation .........................................................9

REFRIGERATOR DRAWERS USE ..................................9

Normal Sounds .................................................................9

Ensuring Proper Air Circulation .........................................9

Using the Controls ...........................................................10

Ice Maker and Water Filtration System……………… ......11

CARE AND CLEANING ..................................................12

Cleaning .........................................................................12

Removing Base Grille .....................................................13

Power Interruptions .........................................................13

Vacation Care .................................................................13

Moving Care ...................................................................13

TROUBLESHOOTING .................................................... 14

ASSISTANCE .................................................................16

In the U.S.A .....................................................................16

In Canada .......................................................................16

Accessories ....................................................................16

PRODUCT DATA SHEETS .............................................17

W11533205

Use and Care Guide and Installation Instruction

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

DOUBLE DRAWERS SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey

all safety messages.

You can be killed or seriously injured if you don’t immediately follow

instructions.

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your double drawer, follow these

basic precautions:

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

 Plug into a grounded 3 prong outlet.

 Do not remove ground prong.

 Do not use an adapter.

 Do not use an extension cord.

 Disconnect power before servicing.

 Replace all parts and panels before operating.

 Remove doors or drawer(s) from your old double

drawer.

 Use non flammable cleaner.

 Do not store or use petrol, flammable liquids or

gas in the vicinity of this or other electrical

appliances. The fumes can cause fires or

explosions.

 Do not store explosive substances such as aerosol

cans with a flammable propellant in this double

drawer.

 Do not use or place electrical devices inside the

double drawer compartments if they are not of the

type expressly authorized by the manufacturer.

 Use two or more people to move and install

double drawer.

 This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

 Children should be supervised to ensure that they

do not play with the appliance.

 To avoid the risk of children becoming trapped and

suffocating, do not allow them to play or hide

inside the double drawer.

 If the power supply cord is damaged, it must be

replaced by the manufacturer or its service agent

or a similarly qualified person.

 Keep ventilation openings, in the appliance

enclosure or in the built-in structure, clear of

obstruction.

 Do not use mechanical devices or other means to

accelerate the defrosting process, other than those

recommended by the manufacturer.

 Do not damage the refrigerant circuit.

 For the models with ice/water: Connect to potable

water supply only.

SAVE THESE INSTRUCTIONS

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Proper Disposal of your Old

Double Drawer

WARNING: Risk of child entrapment. Before you

throw away your old Double Drawer:

 Take off the door or drawer(s).

 Leave the shelves in place so

that children may not easily

climb inside.

Suffocation Hazard

Remove doors or drawers or lid from your old appliance.

Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not

problems of the past. Junked or abandoned double drawers

are still dangerous – even if they will sit for “just a few days.”

If you are getting rid of your old double drawers, please follow

these instructions to help prevent accidents.

Important information to know about disposal of

refrigerants:

Dispose of refrigerator in accordance with Federal and Local

Regulations. Refrigerants must be evacuated by a licensed,

EPA certified refrigerant technician in accordance with

established procedures.

Refrigerator/Freezer Drawers (with ice maker and

water  lter):

Upper refrigerator drawer and lower freezer drawer provide

additional storage options in the kitchen or other areas of the

home. Factory-installed ice maker in lower drawer ensures a

constant supply of ice on hand at all times.

INSTALLATION

REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Tools and parts needed:

 Phillips screwdriver.

 Custom Overlay Door Panel - Refer “Custom Overlay Panel

Preparation”.

Custom handle and mounting hardware (optional).

Parts supplied:

 M4 x 30 ﬂ athead screws (8).

DESIGN SPECIFICATIONS

24” Drawer Models

Double Refrigerator Drawers:

Two refrigerator drawers provide additional storage options in

the kitchen or other areas of the home.

KUDR204KSB KUDR204KPA

Stainless Steel

Overlay - Custom Panels

and Handles Required

KUDF204KSB KUDF204KPA

Stainless Steel

Overlay - Custom Panels

and Handles Required

IMPORTANT: This appliance is intended to be used in

household and similar applications such as:

 Staff kitchen areas in shops, ofﬁ ce and other working

environments;

 Farm houses and by clients in hotels, motels and other

residential type environments;

Location Requirements

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator drawers.

Failure to do so can result in death, explosion, or fire.

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Recessed

receptacle

locations

Utility

opening

Opening and utility location dimensions

Opening width - A

24” (60.96 cm) min.

Opening depth - B

24” (60.96 cm) min.

Opening height - C

/2” (87.6 cm) min.

35” (88.9 cm) max.

Dimension - D

/16” (30.64 cm)

Dimension - E 21

/4” (55.24 cm)

Dimension - F 1

/4” (4.44 cm)

Dimension - G 3” (7.62 cm)

Dimension - H 4

/2” (11.43 cm)

Dimension - I 9

/4” (23.49 cm)

For flush installation, the power outlet can be installed in

adjacent cabinetry with a cutout on the power cord side for

routing of the power cord.

The power outlet can also be recessed on the back wall

behind the unit as per recommended receptacle locations in

the above illustration.

 Bed and breakfast type environments;

 Catering and similar non-retail applications.

NOTES:

 For the double drawer to be ﬂ ush with the front of the base

cabinets, remove any baseboards or moldings from the rear

of the opening. See “Product Dimensions” and later in this

section, “Opening Dimensions.”

 It is recommended that you do not install the double drawer

near an oven, radiator, or other heat source.

 Do not install in a location where the temperature will fall

below 55 °F (13 °C). For best performance, do not install the

refrigerator drawers behind a cabinet door or block the base

grille.

Opening dimensions:

 Height dimensions are shown with the leveling legs

extended to the minimum height.

NOTE: When leveling legs are fully extended, add 5/8”

(1.5 cm) to the height dimensions. See “Product

Dimensions.”

 If the ﬂ oor of the opening is not level with the kitchen ﬂ oor,

shim the opening to make it level with the kitchen ﬂ oor.

Product Dimension

Drawer height dimensions:

 Height dimensions are shown with the leveling legs

extended to 1/4” (0.63 cm) below the refrigerator drawers.

 When leveling legs are fully extended to 1” (2.54 cm) below

the refrigerator drawers, add 3/4” (1.9 cm) to the height

dimensions.

 The power cord is 60” (152.4 cm) long.

Style 1- Stainless steel (front view)

Style 2 - Overlay (front view)

1/4"

(0.63 cm)

15"

(38.1 cm)

/8"

(76.6 cm)

15"

(38.1 cm)

/8"

(86.8 cm)

1/4"

(0.63 cm)

15"

(38.1 cm)

/8"

(76.6 cm)

15"

(38.1 cm)

/8"

(86.8 cm)

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Drawer depth dimensions:

Style 1 - Stainless steel (side view)

Drawer width dimensions

Style 1- Stainless steel (top view)

Style 2 - Overlay (side view)

Style 2- Overlay (top view)

Custom Overlay Drawer Panels

If you plan to install custom wood panels, you will need to

create the panels yourself or consult a qualiﬁ ed cabinetmaker

or carpenter. See dimension drawings for panel speciﬁ cations.

IMPORTANT:

 The thickness of the overlay panels must be 3/4”

(1.9 cm).

 To avoid damage to the drawers, each overlay panel must

not weigh more than 10 lb (4.54 kg).

 Do not exceed the height dimension for the overlay panels.

Panels that exceed the height dimension may damage the

refrigerator drawers, cabinets or countertop.

 The width of the overlay panels may vary according to the

width of the cabinet opening.

For the installation of the customer panel, you will need the

following parts:

 8 Wood screws

 8 Brackets

A- M4 x 32

B- Left and right brackets

Add 3/4” (1.9 cm) to the height dimension when leveling

legs are fully extended.

For custom panel models, this will vary.

/8"

(55 cm)

/16"

(58.6 cm)

/8"

(60.6 cm)

/8"

(60.6 cm)

/8"

(55 cm)

/8"

(60 cm)

/8"

(65.7 cm)**

/8"

(86.8 cm)*

4" (10.2 cm)*

/8"

(42.9 cm)

/8" (55 cm)

/4" (56.5 cm)

Without water filter

/3" (59.3 cm)

With water filter

38.5" (97.9 cm)

/8"

(86.8 cm)*

/32" (99.3 cm)

4" (10.2 cm)*

/2” (105.5 cm)**

/16"

(44.3 cm)

/8" (55 cm)

/4" (56.5 cm)

Without water filter

/3" (59.3 cm)

With water filter

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Top and bottom overlay drawer panel dimensions:

Electrical Requirements

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your double drawer into its ﬁ nal location,

it is important to make sure you have the proper electrical

connection.

Recommended grounding method:

A 115 V, 60 Hz, AC only, 15 A or 20 A fused, grounded

electrical supply is required. It is recommended that a

separate circuit serving only your double drawer be provided.

Use an outlet that cannot be turned off by a switch.

Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, unplug the double drawer or

disconnect power.

INSTALLATION

INSTRUCTIONS

Unpack the Refrigerator Drawers

Excessive Weight Hazard

Use two or more people to move and install or uninstall

appliance.

Failure to do so can result in back or other injury.

Before using your double drawer, all packaging materials

should be removed and the interior should be cleaned.

 Remove tape and glue residue from surfaces before turning

on the double drawer. With your ﬁ ngers, rub a small amount

of liquid dish soap over any adhesive and wipe with warm

water to remove.

 Do not use sharp instruments, rubbing alcohol, ﬂ ammable

ﬂ uids, or abrasive cleaners to remove tape or glue.

These can damage the surfaces of your double drawer.

For more information, refer “Double Drawer Safety” section.

Bottom

15” (38 cm)

13/16”

(2.05 cm)

11/16”

(1.75 cm)

Top

11/16”

(1.75 cm)

/16”” (34.2 cm)

11/16”

(1.75 cm)

Pilot hole 4 places

3/4”

(1.9 cm)

/8” (56.8 cm)

/4” (60.3 cm)

Bottom

15” (38 cm)

11/16”

(1.75 cm)

11/16”

(1.75 cm)

Top

11/16”

(1.75 cm)

/16” (32.6 cm)

/16”

(3.65 cm)

Pilot hole 4 places

3/4”

(1.9 cm)

/8” (56.8 cm)

/4” (60.3 cm)

Upper Door

Lower Door

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

 Dispose of and/or recycle all packaging materials.

 After all packaging materials have been removed, clean the

inside of your double drawer the cleaning instructions in

“Cleaning” section.

Clean before using:

After you remove all of the package materials, clean the inside

of your refrigerator drawers before using them.

See “Cleaning.”

Water Supply Requirements

(Refrigerator/Freezer Drawers only)

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

IMPORTANT:

 If you turn ON the refrigerator before the water line is

connected, turn OFF the ice maker.

 All installations must meet local plumbing code requirements.

 Use copper tubing and check for leaks. Install copper tubing

only in areas where the household temperatures will remain

above freezing.

Tools needed:

Flat-blade screwdriver, 7/16” and 1/2” open-end wrenches or

two adjustable wrenches, 1/4” nut driver and drill bit, cordless

drill.

NOTE: Your refrigerator dealer has a kit available with a 1/4”

(6.35 mm) saddle-type shutoff valve, a union, and copper

tubing. Before purchasing, make sure a saddle-type valve

complies with your local plumbing codes.

Do not use a piercing-type or 3/16” (4.76 mm) saddle valve

which reduces water flow and clogs more easily.

Water pressure:

A cold water supply with water pressure of between 30 and

120 psi (207 and 827 kPa) is required to operate ice maker.

If you have questions about your water pressure, call a

licensed, qualiﬁ ed plumber.

Reverse osmosis water supply:

IMPORTANT:

 The pressure of the water supply coming out of a reverse

osmosis system going to the water inlet valve of the

refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water ﬁ ltration system is connected to

your cold water supply, the water pressure to the reverse

osmosis system needs to be a minimum of 40 to 60 psi

(276 to 414 kPa).

 Check to see whether the sediment ﬁ lter in the reverse

osmosis system is blocked. Replace the ﬁ lter if necessary.

 Allow the storage tank on the reverse osmosis system to reﬁ ll

after heavy usage.

If you have questions about your water pressure, call a

licensed, qualiﬁ ed plumber.

Connect to water line:

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a 1

/2” to 1

/4” (3.81 cm to 3.18 cm) vertical cold

water pipe near the refrigerator.

IMPORTANT:

 Connect to potable water supply only.

 Make sure it is a cold water pipe.

 Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from

the drill and normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure

from the connection on the lower left rear of refrigerator to

the water pipe. Add 7 ft (2.1 m) to allow for cleaning.

Use 1/4” (0.63 cm) O.D. (outside diameter) copper tubing.

Be sure both ends of copper tubing are cut square.

5. Using a cordless drill, drill a 1/4” hole in the cold water

pipe you have selected.

DEF

A- Cold water pipe

B- Pipe clamp

C- Copper tubing

D- Compression nut

E- Compression sleeve

F- Shutoff valve

G- Packing nut

6. Fasten the shutoff valve to the cold water pipe with the

pipe clamp. Be sure the outlet end is solidly in the 1/4”

drilled hole in the water pipe and that the washer is under

the pipe clamp. Tighten the packing nut.

Tighten the pipe clamp screws slowly and evenly so

washer makes a watertight seal. Do not overtighten or you

may crush the copper tubing.

7. Slip the compression sleeve and compression nut on the

copper tubing as shown. Insert the end of the tubing into

the outlet end squarely as far as it will go.

Screw compression nut onto outlet end with adjustable

wrench. Do not overtighten.

8. Place the free end of the tubing in a container or sink, and

turn ON the main water supply. Flush the tubing until water

is clear. Turn OFF the shutoff valve on the water pipe.

Coil the copper tubing.

Connect to Refrigerator:

1. Attach the copper tubing to the valve inlet using a

compression nut and sleeve as shown.

Tighten the compression nut. Do not overtighten.

Use the tube clamp on the back of the refrigerator to

secure the tubing to the refrigerator, as shown.

This will help avoid damage to the tubing when the

refrigerator is pushed back against the wall.

Connect Water Supply

(Refrigerator/Freezer Drawers only)

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

A- Plug with compression nut

C- Pex tubing

4. The ice maker is equipped with a built-in water strainer.

If your water conditions require a second water strainer,

install it in the 1/4” (0.63 cm) water line at either tube

connection. Obtain a water strainer from your nearest

appliance dealer.

5. Plug in refrigerator or reconnect power.

Move the Refrigerator Drawers

to Final Location

1. Place top of cardboard carton or plywood under the

appliance. Remove dolly.

2. Do not remove film or cover.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Turn ON shutoff valve.

3. Check for leaks. Tighten any

connections (including

connections at the valve) or

nuts that leak.

3. Plug into a grounded 3 prong outlet.

Excessive Weight Hazard

Use two or more people to move and install or uninstall

appliance.

Failure to do so can result in back or other injury.

4. Move the refrigerator drawers straight back and evenly in

front of the opening.

Level the Refrigerator Drawers

IMPORTANT:

 Overlay Model-Be sure to install the custom overlay drawer

panels before leveling the refrigerator drawers. See “Install

Custom Overlay Drawer Panels.”

 Before installing the refrigerator drawers, be sure that the

countertop is level.

 If the countertop is not level, adjust the refrigerator drawers’

leveling legs until the appliance is square with the

countertop. Be sure to maintain 3/8” (0.95 cm) minimum gap

between the top of the drawer and the countertop.

1. Open the top drawer and place the level across the top

drawer, as shown.

Check the level

from left to right.

A- Check the level

from left to right.

2. Turn the leveling legs (front and

back) until the top drawer

measures level from left to right.

3. Remove the level and close the top drawer. Check the gap

between the top of the drawer and the countertop. If the

gap measures less than 3/8” (0.95 cm) minimum, turn all

four leveling bolts equally to the left to raise the leveling

legs (this will lower the appliance). Recheck the level.

4. Open both drawers less than midway. Place the level on

the side flange beside the drawers as shown.

Turn the front leveling bolts together in order

to either raise or lower

the appliance until the

sides of the refrigerator

drawers are plumb.

A- Check the level

from front to back.

5. Remove the level and close the drawers. Recheck the gap

between the top of the drawer and the countertop.

If the gap measures less than 3/8” (0.95 cm), turn all four

leveling bolts equally to raise the leveling legs (this will

lower the appliance). Recheck the level.

NOTE: Be sure to recheck the horizontal level of the top

drawer.

6. Be sure all four levelers are on the floor and supporting the

full weight of the refrigerator drawers.

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Normal Sounds

Your new refrigerator drawers may make sounds that your old

refrigerator drawers didn’t. Because the sounds are new to

you, you might be concerned about them. Most of the new

sounds are normal. Hard surfaces, such as the ﬂ oor, walls, and

cabinets, can make the sounds seem louder. The following

describes the kinds of sounds and what may be making them.

 Your refrigerator drawers are designed to run more efﬁ ciently

to keep your food items at the desired temperatures and to

minimize energy usage. The high efﬁ ciency compressor and

fans may cause your refrigerator drawers to run longer than

your old ones. You may also hear a pulsating or high-pitched

sound from the compressor or fans adjusting to optimize

performance.

 You may hear the evaporator fan motor circulating air through

the refrigerator drawers. The fan speed may increase as you

open the drawers or add warm food.

 As each cycle ends, you may hear a gurgling sound due to

the refrigerant ﬂ owing through the sealed system tubing.

Ensuring Proper Air Circulation

In order to ensure proper temperatures, you need to permit

airﬂ ow inside the drawers.

Do not block any airﬂ ow vents. If the vents are blocked, airﬂ ow

will be obstructed and temperature and moisture problems

may occur.

IMPORTANT:

To avoid odor transfer and drying out of food, wrap or cover

foods tightly.

REFRIGERATOR DRAWERS USE

Install Custom Overlay Panel

IMPORTANT:

 Create a custom overlay panel according to the

speciﬁ cations in “Custom Overlay Drawer Panels.”

 KitchenAid is not responsible for the removal or addition of

molding or decorative panels that would not allow access to

the refrigerator for service.

Attach the overlay panel:

NOTE: If the custom panel is incorrectly placed, the panel

may interfere with optimal use of the drawers.

1. Attach the custom handle of your preference on the overlay

before attaching the overlay to the drawer of the refrigerator.

NOTE: Custom handles may vary in dimensions.

Holes must be made on the panel according the specific

dimensions of your handle.

2. Gently pull back the gasket from the corners of the door.

It is not necessary to remove the gasket.

3. Use the brackets (four per drawer, one in each corner of

the drawers).

4. Align the panel to the drawer and position the overlay

panel 5/64” (2 mm) higher than the door.

5. Using the self-tap wood screws (four per drawer; one in

each corner of the drawers), attach the panel to the drawer.

6. Once the overlay is securely attached to the drawer with the

four screws, put the gasket back in its place by pressing it

against the door until the gasket is even and firmly secured.

Complete Installation

1. Remove all boxes, parts packages and packing materials

from the interior of the refrigerator drawers.

2. Remove the film.

3. Clean the refrigerator drawers before use.

4. The controls are preset at the factory to the recommended

settings. Be sure that the compressor is operating properly

and that all the lights are working.

5. If construction will continue after the refrigerator drawers

have been installed, turn OFF the power for both drawers.

To get the most efficient use from your new refrigerator

drawers, read the “Refrigerator Drawers Use” section.

 Contraction and expansion of the inside walls may cause a

popping noise.

 You may hear air being forced over the condenser by the

condenser fan.

 You may hear water running into the drain pan during the Off

cycle.

A- 4 wood screws

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

IMPORTANT:

 Wait 24 hours after you turn on the refrigerator drawers

before you put food into the drawers. If you add food before

the drawers have cooled completely, your food may spoil.

NOTE: Adjusting the controls to a lower (colder) setting in

one or both drawers will not cool them any faster.

 If the temperature is too warm or too cold in the drawers,

ﬁ rst check the air vents to be sure they are not blocked

before adjusting the controls.

 The preset settings should be correct for normal household

usage. The refrigerator control is set correctly when milk or

juice is as cold as you like.

 The freezer control is set correctly when ice cream is ﬁ rm.

 The actual temperature may differ from the display when a

drawer is open for an extended period of time.

Turning drawers On/Off:

 The ﬁ rst time that the refrigerator is plugged

in, the control will be in Cool Off mode.

Cool On and Cool Off will be the only options

that display.

 Press COOL ON to turn on the drawers.

All menus and recommended temperature settings will be

displayed.

Style 1: Refrigerator drawer models

Style 2: Refrigerator/freezer combo models

 The left temperature and presets touch pads control the

temperature of the upper compartment.

 The right temperature and presets touch pads control the

temperature of the lower compartment.

Set to recommended temperatures:

When the refrigerator is turned

On for the ﬁ rst time, a

recommended temperature

is set by default. The controls

adjust the temperature of both

compartments independently.

To adjust set point temperatures, press “+” (plus) or “

”

(minus) until the desired temperature setting is reached.

NOTES:

 The set point for the double refrigerator drawers model is

37 °F (2.7 °C). The set point range for this model is 32° F to

42 °F (0 °C to 5.5 °C) for both compartments. The set point

range for the refrigerator/freezer drawers model is 32 °F to

42 °F (0 °C to 5.5 °C) for the refrigerator drawer and -8 °F to

6 °F (-22 °C to -14.4 °C) for the freezer drawer.

 Wait at least 24 hours between adjustments for the

product to acclimate.

A. F/C touch pad

Using Presets:

For your convenience, each drawer also has controls that are

preset to recommended storage temperatures for specific

products.

Style 1: Refrigerator drawer models

Style 2: Refrigerator/freezer combo models

Using the Controls

The control panels for both double drawer models are located

in the upper drawer. To view and set the Upper and Lower

control panel, pull out the

upper drawer.

Freezer drawer:

 Soft Serve: 6 °F (-14.4 °C)

 Assorted: 0 °F (-17.7 °C)

NOTE: Soft Serve is a temporary temperature setting that will

only last for 4 hours and returns to the previous temperature

set point when complete.

 Spirits: -2 °F (-18.8 °C)

 Deep Freeze: -8 °F (-22 °C)

Pressing any preset option will set the temperature value to

recommended temperature for each category:

Refrigerator drawers:

 Produce: 39 °F (3.8 °C)

 Assorted: 37 °F (2.7 °C)

 Beverage: 34 °F (1 °C)

 Meat: 32 °F (0 °C)

Viewing Celsius temperatures:

 Press the F/C touch pad to toggle between displaying the

temperature in degrees

Fahrenheit and degrees

Celsius. The corresponding

indicator will illuminate.

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

shut off automatically when the temperature returns to normal.

To let you know an Over Temperature condition occurred, the

indicator light will continue to flash until the Reset Alarm touch

pad is pressed.

If the over temperature condition is still present when an Over

Temp reset is performed, the indicator light will continue to

reactivate every 4 hours until refrigerator and freezer

temperatures are below 45 °F (7 °C) and 15 °F (-9 °C),

respectively.

NOTE: These features will not appear on your control unless

your refrigerator is over temperature and the alarm requires a

reset.

Showroom Mode:

This mode is used only when the refrigerator is on display in a

retail store. If you unintentionally turn on Showroom Mode,

Cool Off will light up on the display, and the controls will

appear to work. Exit Showroom Mode by pressing and holding

COOL ON and SABBATH at the same time for 3 seconds.

Ice Maker and

Water Filtration System

(Refrigerator/Freezer Drawers only)

IMPORTANT:

After connecting the refrigerator to a water source or replacing

the water ﬁ lter, ﬁ ll and discard three full containers of ice to

prepare the water ﬁ lter for use before using ice.

Turning the Ice Maker On/Off:

IMPORTANT:

Use the Icemaker touch pad on

the control panel to turn on or

off the ice maker. Do not adjust

the wire arm located on the ice

maker.

 Press the ICEMAKER touch pad to turn on the ice maker.

The indicator light will illuminate when On.

 Press the ICEMAKER touch pad to turn off the ice maker.

REMEMBER:

 Allow 24 hours to produce the first batch of ice.

 The quality of your ice will only be as good as the quality of

the water supplied to your ice maker.

 Avoid connecting the ice maker to a softened water supply.

Water softener chemicals (such as salt) can damage parts

of the ice maker and lead to poor quality ice. If a softened

water supply cannot be avoided, make sure the water

softener is operating properly and is well maintained.

 Do not store anything in the ice storage bin.

 When the refrigerator is turned ON for the first time, ice

maker is turned OFF. (The ice maker indicator light will dim).

 After confirming that water can be automatically supplied to

the ice maker (connecting the refrigerator to the water

source or replacing the water filter, press the ICEMAKER

touchpad to turn on the ice maker. (The indicator light will

iluminate). When the water cannot be supplied automatically

(not connecting to the water source, etc.) and the ice box is

not filled with ice, if the ice maker is turned ON, the ice

maker will continue to operate and the internal heater of ice

maker will operate frequently. This will heat up the

refrigerator, increasing the compressor running rate and

Max Cool:

The Max Cool feature assists with

periods of heavy usage, full grocery

loads or temporarily warm room

temperatures

Max Cool will reset the temperature for

the refrigerator drawer to 32 °F (0 °C) and -3 °F (-19.4 °C) for

the freezer drawer for a 24 hour period.

Press MAX COOL to activate Max Cool feature.

NOTE: The temperature display will remain at -3 °F (-19.4 °C)

and the indicator light will remain On for a 24-hour period

unless any of the following happens:

 User adjusts any of the compartment temperatures.

 Cool Off Mode is entered (activated by user).

 Sabbath Mode is entered (activated by user).

 After 24 hours, the temperature will automatically return to

the previous temperature set point and the indicator light

will turn Off.

NOTE: If the previous temperature set point was set to Soft

Serve in the freezer drawer, the temperature will return to

the recommended temperature 0 °F (-17.7 °C) instead when

Max Cool is complete.

Sabbath Mode:

Sabbath Mode is designed for the traveler

or for those whose religious observances

require turning off the lights.

By selecting this feature, the temperature

set points remain unchanged but the

control panel lights, interior lights, and

control audio turn off. For most efﬁ cient

refrigerator drawers operation, it is recommended to exit the

Sabbath Mode when it is no longer required.

 Press and hold SABBATH for 3 seconds to turn on the

feature. After the 3-second countdown, the feature will

activate and all other displays will turn Off.

 Press and hold SABBATH for 3 seconds to turn off the

feature and turn on the display.

Drawer open:

If any drawer is open longer than 5 minutes, an alarm will

sound every 2 minutes until all drawers are closed or any

control is pressed.

Over Temp Alarm:

NOTE: If the Over Temp Alarm activates, your food may spoil.

See “Power Interruptions”. Minimize opening of drawers until

temperatures return to normal.

The Over Temperature feature is

designed to let you know when either the

refrigerator drawer temperature rises

above 45 °F (7 °C) or the freezer drawer

temperature rises above 6 °F (-14.4 °C)

for 4 hours or longer. The audio alarm will

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Changing the Water Filter:

The water filter is located through the base grille. You do not

have to remove the base grille in order to change the water

filter.

1. Locate the water filter cap in the front base grille. Rotate

the cap counterclockwise to a vertical position and pull the

cap and water filter out through the base grille.

NOTE: There will be water in the filter. Some spilling may

occur.

2. Remove the filter cap by sliding it off the end of the old

filter. The cap will slide to the left or right.

IMPORTANT:

Do not discard the cap.

It is part of your

refrigerator.

Keep the cap

to use with the

replacement

ﬁ lter.

3. Take the new water filter

out of its packaging and

remove the cover from

the O-rings.

4. Slide the filter cap onto the new water filter.

See the illustration in Step 2.

Using the Ice Maker without the Water Filter:

You can run the ice maker without a water filter. Your water will

not be filtered.

Slide the filter cap off the end of the water filter. With the filter

cap in the horizontal position, insert the cap into the base

grille until it stops.

IMPORTANT:

Do not discard the cap. It is part of your refrigerator. Keep the

cap to use with a replacement ﬁ lter.

CARE AND CLEANING

Cleaning

Explosion Hazard

Risk of fire or explosion.

Flammable refrigerant used.

Do not use mechanical devices to defrost refrigerator.

Do not puncture refrigerant tubing.

Clean the double drawer once a month to avoid buildup of

odors. Wipe up spills immediately.

To clean your Double Drawer:

1. Unplug double drawer or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly. Use a clean sponge or soft cloth

and a mild detergent in warm water.

 To avoid damaging wooden tines and trim pieces, wipe

them off with a clean sponge or soft cloth and warm

water.

 Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, ﬂ ammable ﬂ uids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and door liners or gaskets. Do not use paper towels,

scouring pads, or other harsh cleaning tools.

These can scratch or damage materials.

 To help remove odors, you can wash interior walls with a

mixture of warm water and baking soda [2 tbs to 1 qt

(26 g to 0.95 L) of water].

Water Filter Indicator/Reset Filter:

The water filter indicator light

will help you know when to

change your water filter.

The indicator light will change

from dark to yellow when it is

time to order a new filter.

The indicator light will then

change from yellow to red when

it is time to replace the water

filter.

The disposable water filter

should be replaced at least

every 6 months. After replacing the water filter, reset the water

filter indicator.

Press and hold RESET FILTER for 3 seconds. The indicator

light will turn Off.

NOTE: These features will not appear on your control unless

you need to order or replace your filter.

Water Filtration System:

Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or

after the system.

With the filter cap in the

vertical position, insert the new

filter into the base grille until it

stops. Rotate the cartridge cap

clockwise to a horizontal

position.

power consumption. If you do not need the ice making

(including not automatically supplying water), you should turn

OFF the ice maker. (The indicator light will dim).

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

3. Wash stainless steel and painted metal exteriors with a

clean sponge or soft cloth and a mild detergent in warm

water. Do not use abrasive or harsh cleaners, or cleaners

containing chlorine. These can scratch or damage

materials. Dry immediately with a soft, dry cloth to absorb

any remaining water.

NOTE: To keep your stainless steel drawers looking like

new and to remove minor scuffs or marks, it is

recommended that you use the manufacturer’s approved

Stainless Steel Cleaner and Polish. To order the cleaner,

refer “Accessories” section.

IMPORTANT:

 This cleaner is for stainless steel parts only!

 Do not allow the Stainless Steel Cleaner and Polish to come

into contact with any plastic parts such as the trim pieces,

dispenser covers or door gaskets. If unintentional contact

does occur, clean plastic part with a sponge and mild

detergent in warm water. Dry immediately with a soft, dry

cloth to absorb any remaining water.

Condenser cleaning:

1. Remove the base grille to access condenser for cleaning.

Refer “Removing Base Grille” section.

2. Clean the condenser coils regularly. They are located

behind the base grille. Coils may need to be cleaned as

often as every other month. This may help save energy.

Explosion Hazard

Risk of fire or explosion due to puncture of refrigerant

tubing.

Follow handling instructions carefully.

Flammable refrigerant used.

Removing Base Grille

You must remove the base grille to access the condenser

coils for cleaning.

To remove the base grille:

1. Open the double drawer door.

A. Screws

2. Using a Phillips screwdriver, remove the two screws.

3. Remove the base grille.

To replace the base grille:

1. Open the double drawer door.

2. Position the base grille so that both tabs align and the

base grille snaps into place. Replace two screws.

Tighten the screws.

Power Interruptions

If the power will be out for 24 hours or less, keep both

refrigerator drawers closed to help food stay cold.

If the power will be out for more than 24 hours, do one of the

following:

 Place all perishable food in a food locker or cooler with dry

ice.

 If neither a food locker or cooler is available, consume food

if still cold or throw away perishable food at once.

Vacation Care

If you choose to turn the refrigerator drawers off before you

leave, follow these steps:

1. Remove all from the double drawer.

2. Unplug the double drawer.

3. Clean the double drawer. Refer “Cleaning” section.

4. Tape a rubber or wood block to the top of the door to

prop it open far enough for air to get in. This stops odor

and mold from building.

Moving Care

When you are moving your double drawer to a new

home, follow these steps to prepare it for the move.

1. Remove all from the double drawer.

2. Unplug the double drawer.

3. Clean, wipe, and dry it thoroughly.

4. Take out all removable parts, wrap them well, and tape

them together so they don’t shift and rattle during the

move.

5. Tape the doors shut and tape the power cord to the

double drawer.

When you get to your new home, put everything back and

refer to the “Installation Instructions” received with the double

drawer.

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

GENERAL OPERATION Possible Causes and/or Recommended Solutions

Double Drawer will not operate  Power supply cord unplugged? Plug into a grounded 3 prong outlet.



Is outlet working? Plug in a lamp to see if the outlet is working.

 Household fuse blown, or a circuit breaker tripped? Replace the fuse or reset the

circuit. If the problem continues, call an electrician.

 Are controls on? Be sure that the refrigerator drawers controls are on.

Refer “Controls” section.

 Is the refrigerator control set to the Cool Off setting? See “Using the Controls.”

 Are the refrigerator drawers not cooling? Turn them off then on again to reset.

See “Using the Controls.” If this does not correct the problem, call for service.

The motor seems to run too much  Is the temperature outside hotter than normal? Expect the motor will run longer

under warm conditions. At normal temperatures, expect your motor to run about 40 %

to 80 % of the time. Under warmer conditions, expect it to run even more of the time.

 Has a large amount of food just been added to the refrigerator drawers? Adding a

large amount of food warms the refrigerator drawers. The motor normally will run longer

to cool the refrigerator drawers back down.

 Are the drawers opened often? The motor will run longer when this occurs. Conserve

energy by getting all items out at one time, keeping food organized, and closing the

drawer as soon as possible.

 Are the controls not set correctly for the surrounding conditions? Refer “Controls”

section.

 Are the drawers not closed completely? Close the drawers ﬁ rmly. If they do not close

completely, see “The drawers will not close completely” later in this section.

 Are the drawer gaskets not sealed all the way around? Contact a technician or other

qualiﬁ ed person.

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

GENERAL OPERATION Possible Causes and/or Recommended Solutions

The refrigerator drawers seems to

make too much noise

The divider between the two

compartments is warm

 The sounds may be normal for your refrigerator drawers.?

See “Normal Sounds.”

 The warmth is probably due to normal operation of the automatic exterior

moisture control? If still concerned, call for service.

Temperature is too warm

There is interior moisture buildup

 Are the air vents blocked in either compartment? This obstructs cold air movement

between the compartments. Remove any objects from in front of the air vents.

See “Ensuring Proper Air Circulation” for the location of air vents.

 Are the drawers opened often? The refrigerator drawers will warm when this occurs.

Keep the refrigerator drawers cool by getting all items out at one time, keeping food

organized, and closing the door as soon as possible.

 Has a large amount of food just been added to the refrigerator drawers? Adding a

large amount of food warms the refrigerator drawers. It can take several hours for the

refrigerator drawers to return to the normal temperature.

 Are the controls set correctly for the surrounding conditions? See “Using the

Controls.”

 Are the refrigerator drawers not cooling? Turn them off then on again to reset.

See “Using the Controls.” If this does not correct the problem, call for service.

 Are ice maker operated? When ice maker is operated, the heat of ice maker is

added to the refrigerator. The motor normally will run longer in order to make the ice.

If the ice maker is turned ON when the water connot be supplied automatically

(not connecting to the water source, etc.), the heat of ice maker will be added to the

refrigerator, the motor will run longer and the energy consumption will increase.

See “Turning the Ice Maker ON/OFF”.

 Are the air vents blocked in the refrigerator drawers? Remove any objects from in

front of the air vents. See “Ensuring Proper Air Circulation” for the location of air vents.

 Are the drawers opened often? Avoid humidity buildup by getting all items out at one

time, keeping food organized, and closing the drawer as soon as possible.

 Is the room humid? It is normal for moisture to build up inside the refrigerator

drawers when the room air is humid.

 Is the food packaged correctly? Check that all food is securely wrapped.

Dry damp food containers before placing in the refrigerator drawers.

 Are the controls set correctly for the surrounding conditions? See “Using the

Controls.”

The drawers will not close completely  Are food packages blocking the drawer open? Rearrange containers so that they ﬁ t

more tightly and take up less space.

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

DRAWERS Possible Causes and/or Recommended Solutions

 Are the gaskets dirty or sticky? Clean gaskets and the surface that they touch.

Rub a thin coat of parafﬁ n wax on the gaskets following cleaning.

The drawers are difficult to open

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

If you need service:

Before calling for assistance or service, please check

“Troubleshooting.” It may save you the cost of a service call.

If you still need help, follow the instructions below.

When calling, please know the purchase date and the

complete model and serial number of your appliance.

This information will help us to better respond to your

request. Please refer to the warranty page in this manual

for more information on service.

If you need replacement parts:

Component parts should be replaced with like components

and servicing should be done by factory authorized service

personnel, so as to minimize the risk of possible ignition due

to incorrect parts or improper service.

In the U.S.A.

Call the KitchenAid Customer eXperience Center

toll free: 1-800-422-1230.

Our Consultants Provide Assistance With:

 Features and speciﬁ cations on our full line of appliances.

 Installation information.

 Use and maintenance procedures.

 Accessory and repair parts sales.

 Specialized customer assistance (Spanish speaking,

hearing impaired, limited vision, etc.).

 Referrals to local dealers, repair parts distributors, and

service companies. KitchenAid designated service

technicians are trained to fulﬁ ll the product warranty and

provide after-warranty service, anywhere in the United

States.

To locate the KitchenAid designated service company in

your area, you can also look in your telephone directory

Yellow Pages.

For Further Assistance

If you need further assistance, you can write to KitchenAid

with any questions or concerns at:

KitchenAid Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your

correspondence.

In Canada

Call the KitchenAid Canada Customer eXperience Centre toll

free: 1-800-807-6777.

Our Consultants Provide Assistance With:

 Features and speciﬁ cations on our full line of appliances.

 Use and maintenance procedures.

 Accessory and repair parts sales.

 Referrals to local dealers, repair parts distributors, and

services companies. KitchenAid Canada designated service

technicians are trained to fulﬁ ll the product warranty and

provide after-warranty service, anywhere in Canada.

For Further Assistance

If you need further assistance, you can write to KitchenAid

Canada with any questions or concerns at:

KitchenAid Canada

Customer eXperience Centre

200 – 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your

correspondence.

Accessories

The following accessories are available for your refrigerator

drawer.

To order an accessory, contact us and ask for the Part

Number.

In the U.S.A., visit our webpage

www.kitchenaid.com/accessories

or call 1-800-442-9991.

In Canada, visit our webpage www.whirlpoolparts.ca

or call 1-800-807-6777.

Stainless Steel Cleaner and Polish

Order Part #4396095

Base Grille Water Filter

NOTE: Do not use with water that is microbiologically unsafe

or of unknown quality without adequate disinfection before

or after the system.

Replacement  lter

Order Part #4396702 (L200V / NL120V)

ASSISTANCE

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

PRODUCT DATA SHEETS

Application Guidelines/Water Supply Parameters

 It is essential that operational, maintenance, and ﬁ lter

replacement requirements be carried out for the product to

perform as advertised.

 Model WF-L200V: The ﬁ lter monitor system measures the

amount of water that passes through the ﬁ lter and alerts

you to replace the ﬁ lter. When 90 % of the ﬁ lter’s rated life is

used, the ﬁ lter indicator light changes from green to yellow.

When 100 % of the ﬁ lter’s rated life is used, the ﬁ lter indicator

light changes from yellow to red, and it is recommended

that you replace the ﬁ lter. Use replacement cartridge L200V

/ NL120V, part #4396702. 2014 suggested retail price of

$32.99 U.S.A./ $49.99 Canada. Prices are subject to change

without notice.

Model WF-NL120V: Change the water ﬁ lter cartridge every

6-9 months. Use replacement cartridge L200V / NL120V,

part #4396702. 2014 suggested retail price of $32.99 U.S.A./

$49.99 Canada. Prices are subject to change without notice.

 The product is for cold water use only.

 Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or after

the system.

 Refer to the front cover or “Accessories” section for the

Manufacturer’s name, address and telephone number.

 Refer to the “Warranty” section for the Manufacturer’s limited

warranty.

Base Grille Water Filtration System

Model WF-L200V capacity 200 gallons (757 liters)

Model WF-NL120V capacity 120 gallons (454 liters)

Tested and certified by NSF International against

ANSI/NSF Standard 42 for the reduction of Chlorine,

Taste and Odor, Particulate Class lll*; and against

ANSI/NSF Standard 53 for the reduction of Lead,

Mercury, Benzene, and p-dichlorobenzene.

This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of

the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit

for water leaving the system, as specified in ANSI/NSF 42/53.

Chlorine Taste/Odor

Particulate Class

III*

≥ 50 %

≥ 85 %

1.9 mg/L

49,333/mL

2.0 mg/L ± 10 %

At least 10,000

particles/mL

0.07 mg/L

640 mg/L**

0.06 mg/L

312 mg/L

>75.0 %

98.7 %

>75.0 %

99 %

Lead: @ pH 6.5

Lead: @ pH 8.5

Mercury: @ pH 6.5

Mercury: @ pH 8.5

Benzene

p-dichlorobenzene

0.01 mg/L

0.002 mg/L

0.0050 mg/L

0.075 mg/L

0.14 mg/L***

0.15 mg/L***

0.0059 mg/L

0.0054 mg/L

0.0157 mg/L

0.210 mg/L

0.15 mg/L ± 10 %

0.006 mg/L ± 10 %

0.015 ± 10 %

0.225 ± 10 %

0.0014 mg/L

0.0069 mg/L

0.0009 mg/L

0.0007 mg/L

0.002 mg/L

0.0005 mg/L

0.0011 mg/L

0.0042 mg/L

0.0004 mg/L

0.00043 mg/L

0.00083 mg/L

0.0005 mg/L

99.0 %

95.4 %

84.74 %

87.03 %

87.26 %

99.76 %

99.21 %

97.08 %

92.47 %

91.93 %

87.26 %

99.76 %

Substance

Reduction Aesthetic

Effects

Contaminant

Reduction

NSF Reduction

Requirements

NSF Reduction

Requirements

Average

In uent

Average

In uent

Challenge

Concentration

In uent

Challenge

Concentration

Maximum

Effluent

Maximum

Effluent

Average

Effluent

Average

Effluent

Minimum %

Reduction

Minimum %

Reduction

Average %

Reduction

Average %

Reduction

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa).

Temp. = 63 °F (17.2 °C).

Water Supply City or Well

Water Pressure 30 - 120 psi (207 - 827 kPa)

Water Temperature 33 °F - 100 °F (0.6 °C - 37.8 °C)

Service Flow Rate 0.5 GPM (1.89 L/min.) @ 60 psi. (413.7 kPa)

Class III particle size: >5 to <15 um

**Test requirement is at least 10,000 particles/mL of AC Fine Test Dust.

***These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.

®NSF is a registered trademark of NSF International.

Contaminant NSF Reduction Average Influent Challenge Maximum Average Minimum % Average % Reduction Requirements

Influent Concentration Effluent Effluent Reduction Reduction.

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Pour des questions sur les fonctionnalités, fonctionnement/performance, pièces, accessoires ou service, appelez le: 1-800-422-1230

ou visitez notre site Web à... www.kitchenAid.com

Au Canada, pour assistance, installation ou service, composez le: 1-800-807-6777, ou visitez notre site web à... www.KitchenAid.ca

TABLE DES MATIÈRES

SÉCURITÉ DU DOUBLE TIROIR ...................................19

Mise au Rebut de Votre Vieux Double Tiroir ................. 20

SPÉCIFICATIONS DU DESIGN ......................................20

Modèles de Tiroirs 24” ................................................. 20

EXIGENCES D’INSTALLATION .....................................20

Outils et Pièces .............................................................20

Exigences d’Emplacement ...........................................20

Dimensions du Produit ..................................................21

Panneaux de Superposition Personnalisés des Tiroirs ...22

Spéciﬁ cations Électriques.............................................23

INSTRUCTIONS D’INSTALLATION ...............................23

Déballage du Double Tiroir ............................................ 23

Exigences d’Approvisionnement en Eau ......................24

Connexion d’Approvisionnement en Eau ......................24

Déplacement du Double Tiroir à sa

Localisation Finale ......................................................... 25

Nivellement du Double Tiroir ..........................................25

Installation du Panneau de Superposition

Personnalisé .................................................................. 26

Achèvement de l’Installation ..........................................26

UTILISATION DU DOUBLE TIROIR ..............................26

Bruits Normaux .............................................................26

Comment Assurer la Circulation Appropriée de l’Air.....26

Utilisation des Commandes ...........................................27

La Machine à Glaçons (Ice Maker) et le Système

de Filtration de l’Eau……………… ................................28

ENTRETIEN ET NETTOYAGE ........................................29

Nettoyage .....................................................................29

Enlever la Grille de la Base ...........................................30

Courpures de Courant ..................................................30

Soins de Vacances .......................................................30

Précautions à Prendre Avant un Déménagement .........30

DÉPANNAGE ..................................................................31

ASSISTANCE .................................................................33

Aux États-Unis. .............................................................33

Au Canada ....................................................................33

Accessoires ..................................................................33

FICHES TECHNIQUES DU PRODUIT ............................34

DOUBLE TIROIR

RÉFRIGÉRATEUR/CONGÉLATEUR

RÉFRIGÉRATEUR/RÉFRIGÉRATEUR

Modèles: KUDR204KSB, KUDR204KPA, KUDF204KSB,

KUDF204KPA

Guide d’Utilisation et d’Entretien et Instructions d’Installation

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

SECURITÉ DU DOUBLE TIROIR

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager.

Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer.

Risque possible de décès ou de blessure grave si vous ne suivez pas

immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous ne suivez pas

les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de

blessure et ce qui peut se produire en cas de non-respect des instructions.

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

AVERTISSEMENT: Pour réduire les risques d’incendie, de décharge électrique ou de blessures lors de

l’utilisation du double tiroir, prendre quelques précautions fondamentales, y compris les uivantes:

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à

vous et à d’autres. Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot

“DANGER” ou “AVERTISSEMENT”. Ces mots signifient:

 Brancher sur une prise de courant à 3 alvéoles,

reliée à la terre.

 Ne pas enlever la prise de liaison à la terre.

 Ne pas utiliser d’adaptateur.

 Ne pas utiliser de rallonge.

 Déconnecter la source de courant électrique avant

l’entretien.

 Replacer pièces et panneaux avant de faire la mise

en marche.

 Enlever les portes de votre ancien double tiroir.

 Utiliser un produit de nettoyage ininflammable.

 Ne pas utiliser ou conserver d’essence ni de

liquides ou gaz inflammables à proximité de cet ou

d’autres appareils électriques. Les fumées peuvent

causer des incendies ou des explosions.

 Ne pas conserver de substances explosives, par

exemple des bombes aérosols contenant un agent

propulseur, dans ce double tiroir.

 Ne pas utiliser ni placer dans les compartiments du

double tiroir des dispositifs électriques d’un type

autre que celui expressément autorisé par le

fabricant.

 Utiliser deux personnes ou plus pour déplacer et

installer le double tiroir.

 Cet appareil ne convient pas à une utilisation par

des personnes (y compris des enfants) à capacités

physiques, sensorielles ou mentales réduites, ou

possédant un manque d’expérience et de

connaissances, à moins qu’elles ne soient placées

sous supervision ou qu’elles aient reçu des

instructions concernant l’utilisation de l’appareil par

une personne responsable de leur sécurité.

 Les enfants doivent être placés sous surveillance

afin de s’assurer qu’ils ne jouent pas avec l’appareil.

 Pour éviter le risque que des enfants restent

enfermés à l’intérieur et s’asphyxient, ne pas les

laisser jouer ou se cacher dans le double tiroir.

 Si le cordon d’alimentation est endommagé, il doit

être remplacé par le fabricant ou son technicien

d’entretien ou une personne possédant une

qualification similaire.

 Les prises d’air de l’enceinte de l’appareil ou de la

structure encastré doivent être dégagées en tout

temps.

 Ne pas utiliser d’appareils mécaniques ou d’autres

moyens pour accélérer le dégivrage que ceux

recommandés par le fabricant.

 Ne pas endommager le circuit frigorigène.

 Pour les modèles avec glace/eau: Connectez

uniquement à l’alimentation en eau potable.

CONSERVER CES INSTRUCTIONS

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Mise au Rebut de votre Vieux

Double Tiroir

AVERTISSEMENT: Risque de coincement de

l’enfant. Avant de jeter votre ancien Double Tiroir:

 Enlevez les portes.

 Laissez les étagères en place

afin que les enfants ne

puissent pas facilement

grimper à l’intérieur.

Risque de Suffoquer

Enlevez les portes, les tiroirs ou le couvercle de votre

ancien appareil.

Le non-respect de cette instruction peut causer un

décès ou des lésions cérébrales.

IMPORTANT: Le risque qu’un enfant puisse se retrouver

coincé et suffoquer n’est pas chose du passé.

Les réfrigérateurs jetés ou abandonnés restent dangereux,

même s’ils ne restent à l’extérieur que pour

“quelques jours seulement”. Si l’ancien double tiroir doit être

mis au rebut, suivre les instructions suivantes afin d’éviter les

accidents.

Renseignements importants à propos de la mise

au rebut des  uides réfrigérants:

Mettre le réfrigérateur au rebut conformément à la

réglementation fédérale et locale. Les fluides réfrigérants

doivent être évacués par un technicien certifié et agréé

par l’EPA conformément aux procédures établies.

Réfrigérateur/Congélateur à Tiroir (avec machine à

glaçons et  ltre à eau):

Le tiroir de réfrigération supérieur et le tiroir de congélation

inférieur fournissent des options de stockage additionnelles

dans votre cuisine ou dans autres pièces de la maison.

La machine à glaçons installée en usine dans le tiroir inférieur

assure un approvisionnement constant et immédiat de

glaçons tout le temps.

EXIGENCES

D’INSTALLATION

Outils et Pièces

Rassembler les outils et pièces nécessaires avant

d’entreprendre l’installation.

Outils et pièces nécessaires:

 Tournevis à tête cruciforme.

 Panneau de Porte Décoratif Personnalisé – voir la section

“

Panneaux de Superposition Personnalisés des Tiroirs”.

Poignée personnalisée et matériel de ﬁ xation (facultatif).

Pièces fournies:

 8 vis fraisées de M4 x 30.

SPÉCIFICATIONS DU DESIGN

Modèles de Tiroirs 24”

Réfrigérateur à Double Tiroirs:

Un réfrigérateur à double tiroirs fournit des options de

stockage additionnelles dans la cuisine et dans autres pièces

de la maison.

KUDR204KSB KUDR204KPA

Acier Inoxydable

Panneau de Superposition

- Panneaux et Poignées

Personnalisés Nécessaires

KUDF204KSB KUDF204KPA

Acier Inoxydable

Panneau de Superposition

- Panneaux et Poignées

Personnalisés Nécessaires

IMPORTANT: Cet appareil est destiné à un usage domestique

et à d’autres usages similaires comme:

 Espace de cuisine pour personnel de boutiques, bureaux et

autres environnements professionnels.

 Fermes et par les clients des hôtels, motels et autres

environnements de type résidentiel.

 Environnements de type chambres d’hôtes.

Exigences d’Emplacement

Risque d’Explosion

Garder les matériaux et les vapeurs inflammables, telle

que l’essence, loin la double tiroir.

Le non-respect de cette instruction peut causer

un décès, une explosion ou un incendie.

05-May-2021 10:43:59 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

La page charge ...

KitchenAid KUDF204KPA Le manuel du propriétaire

Marque: KitchenAid

Modèle: KUDF204KPA

Catégorie: Frigos

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: KitchenAid KUDF204KPA Owner's manual
español: KitchenAid KUDF204KPA El manual del propietario

KitchenAid KUDF204KPA Le manuel du propriétaire

KitchenAid KUDF204KPA Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents