AT&T CL82229 Manuel utilisateur

Marque: AT&T

Modèle: CL82229

Catégorie: Téléphones

Taper: Manuel utilisateur

Quick start guide

CL82219/CL82229/CL82319/CL82419

DECT 6.0 cordless telephone/

answering system with caller ID/

call waiting

Congratulations

on your purchase of this AT&T product. Before using this AT&T product, please read

the Important safety information section on pages 1-3 of this manual.

Both the model and serial numbers of your AT&T product can be found on the

bottom of the telephone base. Save your sales receipt and original packaging in

case it is necessary to return your telephone for warranty service.

For customer service, please visit our website at https://telephones.att.com

or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Parts checklist

Your telephone package contains the following items.

Telephone line cord

Power adapter for

telephone base

Telephone base

Cordless handset

(2 for CL82219/

CL82229)

(3 for CL82319)

(4 for CL82419)

Charger for cordless

handset with power

adapter installed

(1 for CL82219/CL82229)

(2 for CL82319)

(3 for CL82419)

Battery for cordless

handset

(2 for CL82219/

CL82229)

(3 for CL82319)

(4 for CL82419)

Battery

compartment cover

(2 for CL82219/

CL82229)

(3 for CL82319)

(4 for CL82419)

Please refer to the online CL82219/CL82229/CL82319/CL82419 DECT

6.0 cordless telephone/ answering system with caller ID/ call waiting

Complete user’s manual for a full set of installation and operation

instructions at

www.telephones.att.com/manuals.

Quick start guide Smart call blocker

leaet

Quick start guide

CL82219/CL82229/CL82319/CL82419

DECT 6.0 cordless telephone/

answering system with caller

ID/ call waiting

Wall-mount bracket

Important safety information

This symbol is to alert you to important operating or servicing instructions

that may appear in this user’s manual. Always follow basic safety precautions

when using this product to reduce the risk of injury, re, or electric shock.

Safety information

f Read and understand all instructions in the user’s manual. Observe all markings on

the product.

f Avoid using a telephone during a thunderstorm. There may be a slight chance of

electric shock from lightning.

f Do not use a telephone in the vicinity of a gas leak. Under certain circumstances,

a spark may be created when the adapter is plugged into the power outlet, or

when the handset is replaced in its cradle. This is a common event associated

with the closing of any electrical circuit. In an inadequately ventilated

environment, the user should not plug the phone into a power outlet, nor put a

charged handset into the cradle where there are concentrations of ammable

or ame-supporting gases. A spark in such an environment could create a re

or explosion. Such environments may include: medical use of oxygen without

adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a

leak of natural gas; etc.

f Do not use this product near water or when you are wet. For example, do not

use it in a wet basement or shower, nor next to a swimming pool, bathtub,

kitchen sink, and laundry tub. Do not use liquids or aerosol sprays for cleaning.

If the product comes in contact with any liquid, unplug any line or power cord

immediately. Do not plug the product back in until it has dried thoroughly.

f Install this product in a protected location where no one can trip over any line or

power cords. Protect cords from damage or abrasion.

f If this product does not operate normally, see the Troubleshooting section of the

online Complete user’s manual. If you cannot solve the problem, or if the product

is damaged, refer to the Limited warranty section on pages 28 - 30. Do not

open this product except as directed in your user’s manual. Opening the product

or reassembling it incorrectly may expose you to hazardous voltages or other

risks.

f Replace batteries only as described in your user’s manual (page 5). Do not burn

or puncture batteries — they contain caustic chemicals.

f The power adapters are intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

Important safety information

CAUTIONS:

f Use only the power adapters provided with this product. To obtain a

replacement, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

f Use only the supplied rechargeable battery or replacement battery (model

BT183342/BT283342). To order, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

CAUTION: To prevent risk of re or battery explosion, replace with

the correct battery type. Dispose of used batteries according to the

instructions.

Especially about cordless telephones

f Privacy: The same features that make a cordless telephone convenient create

some limitations. Telephone calls are transmitted between the telephone base

and the handset by radio waves, so there is a possibility that your cordless

telephone conversations could be intercepted by radio receiving equipment

within range of the cordless handset. For this reason, you should not think

of cordless telephone conversations as being as private as those on corded

telephones.

f Electrical power: The telephone base of this cordless telephone must be

connected to a working electrical outlet which is not controlled by a wall switch.

Calls cannot be made from the handset if the telephone base is unplugged,

switched o or if the electrical power is interrupted.

f Potential TV interference: Some cordless telephones operate at frequencies

that may cause interference to TVs and VCRs. To minimize or prevent such

interference, do not place the telephone base of the cordless telephone near

or on top of a TV or VCR. If interference is experienced, moving the cordless

telephone farther away from the TV or VCR will oen reduce or eliminate the

interference.

f Rechargeable batteries: This product contains nickel-metal hydride rechargeable

batteries. Exercise care in handling batteries in order not to create a short

circuit with conductive material such as rings, bracelets and keys. The battery or

conductor may overheat and cause harm. Observe proper polarity between the

battery and the battery charger.

f Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe

manner. Do not burn or puncture. Like other batteries of this type, if burned or

punctured, they could release caustic material which could cause injury.

The RBRC Seal means that the manufacturer is voluntarily

participating in an industry program to collect and recycle nickel-

metal hydride rechargeable batteries when taken out of service

within the United States. These batteries may be taken to a

participating local retailer of replacement batteries or recycling

center. You may call 1-800-8-BATTERY® for locations accepting

spent Ni-MH batteries.

The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of

Call2recycle, Inc.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led

a multidisciplinary evaluation of the interference between portable wireless

telephones and implanted cardiac pacemakers. Supported by the U.S. Food and

Drug Administration, WTR recommends to physicians that:

Pacemaker patients:

f Should keep wireless telephones at least six inches from the pacemaker.

f Should NOT place wireless telephones directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

f Should use the wireless telephone at the ear opposite the pacemaker.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from

other persons using wireless telephones.

ECO mode

This power conserving technology reduces power consumption for optimal battery

performance. The ECO mode activates automatically whenever the handset is

synchronized with the telephone base.

Especially about telephone answering systems

Two-way recording: This unit does not sound warning beeps to inform the other

party that the call is being recorded. To ensure that you are in compliance with any

federal or state regulations regarding recording a telephone call, you should start

the recording process and then inform the other party that you are recording the

conversation.

SAVE THESE INSTRUCTIONS

Important safety information

Install

Telephone base

Notes:

f Plug one end of the telephone line cord into a telephone jack or a DSL lter.

f If you have DSL high-speed Internet service, a DSL lter (not included) is required.

Charger

Caution: Use only the power adapter(s)

provided with this product. To obtain a

replacement, visit our website at

www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial

1 (866) 288-4268..

Battery

Install the battery, as shown below.

Caution: Use only the supplied rechargeable battery or replacement battery

(model BT183342/BT283342).

Install

Charge your handset(s) before initial use. The battery is fully charged aer 10

hours of continuous charging. The CHARGE light on the top of the handset is on

during charging.

THIS SIDE UP /

CE CÔTÉ VERS LE HAUT

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

183342/

BT283342 (2.4V 400mA

h Ni-MH)

WARNING

/ AVERTISS

EMENT :

NOT B

URN OR PUNCTURE BATTERIES.

E PAS INCINÉRER OU PERCER LES PILES.

Mad

e in Chin

a / Fabriqué en chine CR1349

Handset overview

Handset

REDIAL/

PAUSE

Ì Press repeatedly to view the last ten numbers dialed.

Ì While entering numbers, press and hold to insert a

dialing pause.

MENU/

SELECT

Ì When the handset is not in use, press to show the

menu.

Ì While in the menu, press to select an item or save an

entry or setting.

VOL p DIR

Ì Press to show directory entries when the handset is

not in use.

Ì Press to scroll up while in menus.

Ì Press to increase the listening volume when on a call.

CALL BLOCK Ì Press to block the incoming call when the telephone is

ringing.

Ì When on a call, press to block the call.

Ì When the handset is not in use, press to show the call

block menu.

VOL q CID

Ì Press to show caller ID log when the handset is not in

use.

Ì Press to scroll down while in menus.

Ì Press to decrease the listening volume when on a call.

PHONE/

FLASH

Ì Press to make or answer a call.

Ì During a call, press to answer an incoming call when

you receive a call waiting alert.

OFF/

CANCEL

Ì During a call, press to hang up.

Ì While in a menu, press to cancel an operation, back

up to the previous menu, or exit the menu display; or

press and hold this button to exit to idle mode.

Ì Press and hold to set or dial your voicemail number.

TONE /a>A

Ì Press to switch to tone dialing temporarily during a call

if you have pulse service.

Ì While entering names, press to change the next letter

to upper or lower case.

QUIET# Ì Press and hold to enter the QUIET mode setting

screen, or to deactivate QUIET mode.

PTT Ì Press to initiate a one-to-one or one-to-group

broadcast.

Ì Press and hold to broadcast to a group of system

devices.

MUTE/

DELETE

Ì During a call, press to mute the microphone.

Ì Press to delete digit or character.

/SPEAKER

Ì Press to make or answer a call using the

speakerphone.

CHARGE light Ì On when the handset is charging in the telephone

base or charger.

Handset overview

Telephone base

IN USE

indicator

Ì On when the telephone is in use, or when the

answering system is answering an incoming call.

Ì Flashes when another telephone is in use on the

same line.

/REPEAT Ì Press to repeat a message.

Ì Press twice to play the previous message.

X/DELETE Ì Press to delete the message currently playing.

Ì Press twice to delete all old messages when the

telephone is not in use.

/SKIP Ì Press to skip a message

/PLAY/

STOP

Ì Press to start or stop message playback.

Message

counter

Ì Shows the number of messages.

q VOLUME p

Ì While in idle mode, press to adjust the base ringer

volume.

Ì During message playback, press to adjust the

listening volume.

FIND HS

Ì While the phone is idle, press to page all handsets.

/ANS ON/OFF

Ì Press to turn the built-in answering system on or

o.

Telephone base overview

Initial basic settings

Aer you install your telephone or power returns following a power outage, the

handset and telephone base will prompt you to set the date and time. To skip

setting the date and time, press on the handset.

Voice guide to set Smart call blocker and

answering system

Aer the date and time setting is done or skipped, the telephone base will prompt

if you want to set Smart call blocker. Press MENU/SELECT to start the Smart call

blocker setup via voice guide. To skip the setup, press .

Aer the Smart call blocker setting is done or skipped, the telephone base will then

prompt if you want to set up the answering system. Press MENU/SELECT to start the

answering system setup via voice guide. To skip the setup, press .

We recommend you program your telephone system before use. The following

are a few examples of common features to set before using the telephone. Refer to

the Handset and telephone base settings and Answering system settings in the

Complete user’s manual for detailed instructions on setting all telephone features.

Note: You can restart the voice guide to set Smart call blocker by resetting your handset power.

Date and time

Note: Set the date/time before using the answering system.

1. -> or -> Set date/time -> SELECT.

2. Enter the month, day and year using the dialing keys -> SELECT.

3. Enter the hour and minute using the dialing keys.

4. or to choose AM or PM -> SELECT.

Basic answering system setup via voice guide

You can follow the voice guide to record your own announcement, set the number

of rings and set the message alert tone.

1. -> or -> Answering sys -> SELECT.

2. or -> Voice guide -> SELECT.

3. Set up the answering system by inputting the designated numbers, as

instructed.

Record your own announcement

Your outgoing announcement plays when calls are answered by the answering

system. You can use the preset announcement to answer calls, or replace it with

your own recorded announcement.

1. -> or -> Answering sys -> SELECT.

2. to select Announcement.

3. to select Record annc.

4. Facing the handset, record your announcement and press 5 to end recording.

Number of rings

You can set the answering system to answer an incoming call aer 2, 3, 4, 5, or 6

rings. You can also select toll saver. If you choose toll saver, the answering system

answers a call aer two rings when you have new messages, and aer four rings

when there are no new messages. This enables you to check for new messages and

avoid paying unnecessary long distance charges if you are calling from out of your

local area.

If you want the built-in answering system instead of the voicemail to answer a call,

you should set the answering system to answer a call at least two rings before the

voicemail is set to answer. Contact your telephone service provider for information

on your voicemail settings.

1. -> or -> Answering sys -> SELECT.

2. or -> Ans sys setup -> SELECT.

3. or -> # of rings -> SELECT.

4. or to choose among 2, 3, 4, 5, 6, or Toll saver -> SELECT.

Ringer volume

You can set the ringer volume level to one of the six levels, or turn the ringer o.

1. -> or -> Ringers -> SELECT.

2. to select Ringer volume.

3. or to choose the desire level -> SELECT.

Initial basic settings

Operate

Operation Steps

Making a call

Press

PHONE or /SPEAKER -> Enter the telephone number.

On-hook dialing

(predialing)

Enter the telephone number -> Press

PHONE or

/SPEAKER to call.

Answering a call

Press

PHONE or /SPEAKER, or press any dialing keys

(0-9, TONE or #).

Ending a call

Press

OFF or return the handset to the telephone base or

charger.

Handset

speakerphone

During a call, press /SPEAKER to switch between

handsfree speakerphone and normal handset use.

Redial Press REDIAL repeatedly to select the desired entry ->

PHONE or /SPEAKER to call.

Volume control

Press / VOLUME to decrease or press / VOLUME to

increase the listening volume during a call.

Call waiting

(Requires

subscription from

telephone service

provider)

Press FLASH to put current call on hold and to take the new

call; press again to switch back and forth between calls.

LCD language

Using a cordless handset or the telephone base:

1. MENU -> / -> Settings -> SELECT.

2. SELECT again to select LCD language.

3. / to choose English, Français or Español -> SELECT.

Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to

English without going through the French or Spanish menus.

f Press MENU on the handset in idle mode -> enter 364#; or

Initial basic settings

Directory

The directory can store up to 50 entries, which are shared by all system devices.

Operation Steps

Adding an entry

1. -> or -> Directory -> SELECT.

2. or -> Add contact -> SELECT.

3. Enter a telephone number up to 30 digits -> SELECT.

4. Enter a name up to 15 characters -> SELECT.

Searching/dialing an

entry

1. in idle mode.

2. Press or to browse through the directory, or

press the dialing keys (0-9) to start a name search.

3. Press

or /SPEAKER on a handset to call.

Caller ID

This product supports caller ID services oered by most telephone service

providers. The telephone stores caller ID information of the last 50 incoming calls in

the telephone base. This information is common to all devices.

Caller ID announce

When this feature is on and you have an incoming call, the handset and/or base

speaks “Call from...” and the name of the caller based on the directory or caller ID

information. You can turn this feature o for the base or each individual handset, or

both.

1. -> or -> Settings -> SELECT.

2. or -> Caller ID annc -> SELECT.

3. or to choose Set all On/O, Local handset or Base -> SELECT.

4. or to choose On or O -> SELECT.

Review and dial a number in the call log

1. in idle mode -> or to scroll through the list.

or /SPEAKER to call when the desired entry is displayed.

Erase missed calls indicator in the call log

When the screen shows XX Missed calls, scroll the call log one by one,

or press and hold CANCEL in idle mode.

Smart call blocker

If you have subscribed to caller ID service, then you can use the Smart call blocker

feature to lter incoming calls from unknown callers.

Turn Smart call blocker on or o

Smart call blocker is set to on, and to allow all incoming calls by default. To turn on

or o Smart call blocker:

Ì CALL BLOCK in idle mode -> SELECT -> or -> On or O -> SELECT.

Call controls

Call categories Call control /

Set profile options

Welcome calls Ì Numbers saved in

allow list.

Ì Numbers saved in

directory.

Ì Numbers not found in

block list.

Ì Caller ID names saved

in star name list.

The telephone allows these calls to

get through and ring.

Unwelcome

calls

Ì Numbers saved in

block list.

The telephone blocks these calls

from ringing through.

* Includes licenced Qaltel

technology.

Qaltel

is a trademark of Truecall Group Limited.

Smart call blocker

Call categories Call control /

Set profile options

Unknown calls Calls without numbers

Ì Numbers that are

“out of area“ or set to

“Private“.

You can choose one of the following

ve prole options for handling all

unknown calls:

Screen unknown

The telephone plays the screening

announcement, and then ask the

caller to say his/her name before the

call rings on your telephone. You can

then answer the call, and hear the

caller’s name announced. You can

decide whether to accept or reject

the call, or to forward the call to the

answering system.

Screen robot

The telephone plays the screening

announcement, and then ask

the caller to press the pound key

(#) before the call rings on your

telephone. You can then answer the

call.

Allow unknown

(default setting)

The telephone allows the calls to get

through and ring.

Unknown to answering system

The telephone forwards the calls

to the answering system without

ringing.

Block unknown

The telephone rejects the calls with

block announcement.

Uncategorized calls

Ì With absent caller ID

number.

Ì Numbers not found in

directory.

Ì Numbers not found in

allow list.

Ì Numbers not found in

block list.

Ì With caller ID names

not found in star

name list

Notes:

Ì Smart call blocker is on, once you install your telephone. It allows all incoming calls to get through and

ring by default. You can change the Smart call blocker settings to screen incoming calls from numbers or

names that are not yet saved in your directory, allow list, block list, or star name list. You can easily add

incoming phone numbers to your allow list and block list. This allows you to build up your lists of allowed

and blocked numbers, and Smart call blocker will know how to deal with these calls when they come in

again.

Ì If you turn o Smart call blocker, all incoming calls will ring, including numbers saved in your block

list.

Ì When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls will be

sent to the answering system after screening.

Set up allow list, block list and star name list

Add numbers from caller ID log

Adding CID log

entry to block list

1. Press CID on the handset or on telephone base ->

or .

2. Press SELECT when the desired entry appears.

3. or -> Block list -> SELECT twice.

4. Press SELECT again to save.

Adding CID log

entry to allow list

1. Press CID on the handset or on telephone base ->

or .

2. Press SELECT when the desired entry appears.

3. or -> Allow list -> SELECT.

4. Press SELECT twice to save.

Adding CID log

entry to star name

list

1. Press CID on the handset or on telephone base ->

or .

2. Press SELECT when the desired entry appears.

3. or -> Star name list -> SELECT twice.

Smart call blocker

Add numbers manually

Adding a new

number to the

block list

1. Press CALL BLOCK.

2. or -> Block list -> SELECT.

3. or -> Add new entry -> SELECT.

4. Enter a telephone number up to 30 digits -> SELECT.

5. Enter a name up to 15 characters -> SELECT.

Adding a new

number to the

allow list

1. Press CALL BLOCK.

2. or -> Allow list -> SELECT.

3. or -> Add new entry -> SELECT.

4. Enter a telephone number up to 30 digits -> SELECT.

5. Enter a name up to 15 characters -> SELECT.

Adding a new

name to the star

name list

1. Press CALL BLOCK.

2. or -> Star name list -> SELECT.

3. or -> Add new entry -> SELECT.

4. Enter a name up to 15 characters -> SELECT.

Set prole

There are ve prole setting options, which allows you to quickly set up Smart call

blocker.

Set profile Steps

Screen unknown

Screen all unknown

calls

1. CALL BLOCK -> or -> Set proile -> SELECT.

2. Press SELECT to select Screen unknown.

Screen robot

Screen robocalls

1. CALL BLOCK -> or -> Set proile -> SELECT.

2. or -> Screen robot -> SELECT.

Allow unknown

Block calls on the

block list only (default

settings)

1. CALL BLOCK -> or -> Set proile -> SELECT.

2. or -> Allow unknown -> SELECT.

Smart call blocker

Add a screened number to the block list or allow

list

If you select Screen unknown or Screen robot in Set prole, the telephone plays

a screening announcement to the caller, and asks the caller to respond before the

call rings through to you. Aer the caller responds, the telephone rings and you can

then pick up the call. The telephone then asks whether you want to answer or reject

the call, or to forward the call to the answering system. The telephone announces

“To answer the call, press 1. To answer and always allow this number, press 2. To block

this number, press 3. To send this call to the answering system, press 4. To repeat

these options, press *”.

You can add a screened number to the block list or to the allow list.

Add current number

to the allow list

f Press 2 to answer the call, and

add the current number to the

allow list.

Add current number

to the block list

f Press 3 to block the call, and

add the current number to the

block list.

Notes

Ì Unknown calls without caller ID information will not have the option 2, “answer and always allow

this number”, and option 3, “to block this number”. No number will be added to the allow list or

block list for these calls.

Ì If you do not want to take the call, press

OFF to end the call.

Smart call blocker

Set profile Steps

UnknownToAns.S

Forward all unknown

calls to the answering

system

1. CALL BLOCK -> or -> Set proile -> SELECT.

2. or -> UnknownToAns.S -> SELECT.

Block unknown

Block all unknown

calls

1. CALL BLOCK -> or -> Set proile -> SELECT.

2. or -> Block unknown -> SELECT.

Block the caller while on a call

When you are on a call and speaking to the caller, and you do not want to continue

the call, you can end the call with block announcement and add the number to the

block list.

1. During a call, press CALL BLOCK.

2. Press SELECT to end the call.

Notes

Ì The allow list stores up to 200 entries, the block list stores up to 1,000 entries, and the star name

list stores up to 10 names.

There are many organizations like schools, medical oces, and pharmacies that use robocalls to

communicate important information to you. Robocall uses an autodialer to deliver pre-recorded

messages. By entering the name of the organizations into the star name list, it ensures these calls will

ring through when you only know the caller names but not their numbers.

Unblock a telephone number

If you have added a telephone number to the block list, you can unblock it.

1. Press CALL BLOCK.

2. or -> Block list -> SELECT.

3. Press SELECT to select Review.

4. or to browse through the block entries.

5. When the desired entry displays, press DELETE, then press SELECT to conrm.

Smart call blocker

La page charge ...

AT&T CL82229 Manuel utilisateur

Marque: AT&T

Modèle: CL82229

Catégorie: Téléphones

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: AT&T CL82229 User manual

AT&T CL82229 Manuel utilisateur

AT&T CL82229 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents