Extron FOX II T HD 4K Manuel utilisateur

Catégorie
Commutateurs vidéo
Taper
Manuel utilisateur
User Guide
FOX II T HD 4K
Fiber Optic Extenders
Fiber Optic Transmitter for HDMI
68-2300-01 Rev. C
01 19
Safety Instructions
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within
the product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer
darauf aufmerksam machen, dass im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und
die einen elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di importanti istruzioni di funzionamento
e manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению электрическим
током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 简体中文
警告 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压,
险。
注意 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容,敬请访问 Extron 网站 , www.extron.com,参见
Extron 安全规范指南,产品编号 68-290-01
安全記事 • 繁體中文
警告: 若產品上使用此號,是為了提醒使用者產品機殼內存
可能會導致觸電之風險的未絕緣危險電
注意 產品使用此符號,是為提醒使用備隨附的用戶手冊中有
重要的操作和維(維修説明
有關安全性指導方法規遵EMI/EMF 相容取範圍和相關主題的詳細
訊,請瀏覽 Extron 網站www.extron.com然後參閱《Extron 安全性與法規
守手準則編號 68-290-01
安全上の注意
日本語
警告: この 製品上に表示されている場合は、筐体内に絶縁され
いない高電圧が流れ、感電の危険があるこていま
意:この が製品上に表示されている場合は、本機の取明書に
されている重作と保()のについてユーザー
意を喚起するものです
安全上の注意、法規厳守、EMI/EMF適合性、その他の関連項目
スト イト www.extron.com よ り Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ださい。
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
Copyright
© 2019 Extron Electronics. All rights reserved.
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks®, registered service marks(
SM
), and trademarks(
TM
) are the property of RGBSystems, Inc. or Extron
Electronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(®)
Extron, Cable Cubby, Codec Connect, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, GlobalViewer, Global
Configurator, Global Scripter, Hideaway, IP Intercom, IP Link, Key Minder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA, PlenumVault, PoleVault,
PowerCage, PURE3, Quantum, SoundField, SpeedMount, SpeedSwitch, System INTEGRATOR, TeamWork, TouchLink, V-Lock, VoiceLift, VN-Matrix,
WallVault, WindoWall, XTP, and XTP Systems
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
)
AAP, AFL (Accu-RATE Frame Lock), ADSP - Advanced Digital Sync Processing, Auto-Image, CableCover, CDRS - Class D Ripple Suppression, Codec
Connect, DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), Driver Configurator, DSP Configurator, DSVP (Digital Sync
Validation Processing), eLink, EQIP, EverLast, FastBite, FOX, FOXBOX, HyperLane, IP Intercom HelpDesk, MAAP, MicroDigital, Opti-Torque, ProDSP,
QS-FPC - QuickSwitch Front Panel Controller, Room Agent, Scope-Trigger, ShareLink, Show Me, SIS (Simple Instruction Set), Skew-Free, SpeedNav,
StudioStation, Triple-Action Switching, True4K, Vector™ 4K, VideoLounge, WebShare, XTRA, ZipCaddy, and ZipClip
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part15 of the FCC rules. The ClassA limits provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause interference. This interference must be corrected at
the expense of the user.
Class 1 Laser Product
Any service to this product must be carried out by Extron Electronics and its qualified service
personnel.
CAUTION: Using controls, making adjustments, or performing procedures in a manner
other than what is specified herein may result in hazardous radiation exposure.
NOTE: For more information on safety guidelines, regulatory compliances,
EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and
Regulatory Compliance Guide” on the Extron website.
Produit laser de classe1
Si ce produit a besoin d’un quelconque entretient, celui-ci doit être fait par ExtronElectronics et son
personnel qualifié.
ATTENTION : L’utilisation de commandes, la réalisation de réglages, ou l’exécution de
procédures de manière contraire aux dispositions établies dans le présent document,
présente un risque d’exposition dangereuse aux radiations.
Remarque : Pour plus d'informations sur les directives de sécurité, les conformités de
régulation, la compatibilité EMI/EMF, l'accessibilité, et les sujets en lien, consultez le
«Informations de sécurité et de conformité Extron» sur le site internet d'Extron.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
CAUTION: Risk of minor personal injury.
ATTENTION : Risque de blessuremineure.
ATTENTION:
Risk of property damage.
Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1^* XX2$* X2!* X2% CE}
NOTE: For commands and examples of computer or device responses mentioned
in this guide, the character “0” is used for the number zero and “O” is the capital
letter “o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
viiFOX II T HD 4K Transmitter • Contents
Contents
Introduction............................................................ 1
About this Guide ................................................. 1
About the FOX II T HD 4K Transmitter ................. 2
Fiber Cable Transmission Modes .................... 3
Features ............................................................. 3
Installation and Operation .................................. 5
Installation Overview ........................................... 5
Connections ....................................................... 5
Rear Panel ...................................................... 5
Front Panel Configuration Port ........................ 8
Connection Considerations ............................. 8
Indications and Operation ................................. 11
Front Panel Features ..................................... 11
Rear Panel Features ..................................... 12
Operation ..................................................... 13
Remote Control ................................................... 14
Simple Instruction Set Control .......................... 14
Host-to-Unit Instructions ............................... 14
Unit-Initiated Messages ................................ 15
Error Responses ........................................... 15
Using the Command and Response Table .... 16
Product Configuration Software ........................ 20
Installing the Software ................................... 20
Starting the Program .................................... 22
Using the Software ....................................... 23
Device Menu................................................. 27
Updating the Firmware ................................. 28
Unit Mounting ...................................................... 32
Mounting the Unit ............................................. 32
Tabletop Use ................................................ 32
Mounting Kits ............................................... 32
Rack-Mounting UL Guidelines ...................... 32
FOX II T HD 4K Transmitter • Contents viii
FOX II T HD 4K Transmitter • Introduction 1
Introduction
WARNING: The FOX II T HD 4K outputs continuous invisible light (Class 1 rated), which
may be harmful to the eyes; use with caution.
AVERTISSEMENT :
Le FOX II T HD 4K émet une lumièr
e invisible en continu (conforme
à la classe1) qui peut être dangereux pour les yeux, à utiliser avec précaution.
Do not look into the r
ear panel fiber optic cable connectors or into the fiber optic
cables themselves.
Ne r
egardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
Plug the attached dust cap into the optical transceiver when the fiber optic cable is
unplugged.
Branchez la pr
otection contre la poussière dans l’ensemble émetteur/récepteur
lorsque le câble fibre optique est débranché.
About this Guide
About the FOX II T HD 4K T
ransmitter
Featur
es
About this Guide
This guide contains information about the ultra-high performance Extron FOX II T HD 4K
transmitter, a fiber optic extender (see figure 1 on the next page).
ATTENTION: An ATTENTION is used to indicate potential damage to product or
property.
This is Notations cont to be used as a second paragraph.
ATTENTION:
This Notations Bullet 1 used to list multiple points may be used as for many
separate topics.
Assuming this is a separate Attention topic this is how it looks.
When there is a second paragraph for a bullet 1 use this Notations Bullet 1 cont.
ATTENTION:
This Notations Bullet 1 used to list multiple points may be used as for many
separate topics.
Assuming there is a sub bullet items for a bullet, use Notations bullet 2 topic this
is how it looks.
When there is a second paragraph for a bullet 2 use this Notations Bullet 2
cont.
CAUTION: May result in eye injury. Always wear protective glasses when working
with lasers. (This is Caution Text Style.)
Cautions MUST ALWAYS START with a caution about the possibility of minor injury.
Multiple Cautions in the same table must EACH state the risk of minor injury.
DANGER: Falling may result in serious injury or death. Wear appropriate
climbing gear before attempting to scale this mountain.
This is Danger cont
Danger Bullet 1: If this is the first of a series of separate dangers, each bullet
must state what the danger is.
This is Danger Bullet 1 cont.
This is Danger Bullet 2
DANGER bullet 2 cont
NOTE: Note Text style.
This is Notations cont to be used as a second paragraph.
TIP: This is Tip Text
This is Notations cont to be used as a second paragraph.
WARNING: May result in serious injury. Always wear protective gear.
This is Notations cont to be used as a second paragraph.
When there are multiple warnings in one Warning table cell, EACH must state the
portential risk of serious injury. (This is Notations bullet_1.
FOX II T HD 4K Transmitter • Introduction 2
S
T
A
N
D
B
Y
C
L
A
S
S
2
W
IRIN
G
1
2
XPA 10
0
2
LEVE
L
1
1
2
1
2
LI
MI
TER/
PR
O
TECT
S
I
G
NAL
2
INPUTS
O
UTPUT
R
EM
O
TE
0
0
V
OL/M
U
TE
1
0V
5
0
mA
1
00
-24
0V
1
.
3
A
,
5
0
-6
0
Hz
100-
240V ~ 0
.3A MAX
50-60 Hz
DISPLAYPORT
L R
RS-232
OPT
ICAL
T
x
R
ES
ET
LINK
LINK
Rx
RS-232 IR
ALARM
Tx Rx G
1 2
L R
Tx Rx Tx RxG
AUDIO
OUTPUTS
AUDIO
RET
URN IN
REMOTE
OVER
FIBER
FOX R DP 4K
100-240V ~ 0.5A MAX
50-60 Hz
HDMI LOOP THRU
L R
RS-232
OPTICAL
Tx
RESET
LINK
LINK
Rx
RS-232 IR
ALARM
Tx Rx G 1 2
L R
Tx Rx Tx Rx
G
AUDIO
INPUTS
AUDIO
RETURN OUT
REMOTE
OVER
FIBER
FOX T HD 4K
POW
ER
12V
--A MAX
G
Tx Rx
R
T
S
CT
S
COM 1
G
T
x
Rx
COM
2
V C G
V
OL
RELAYS
1
2 C
1
2 3
4 G
DIGITAL I/O
PWR
OUT
=
6W
eBUS
+V +S
-S
G
LAN
IPCP PRO 250
IR/S
S
G
MODE
L
80
POWER
SD CARD
USB
PLAY STATUS
Extron
Extron
H
e
lp
Syste
m
Off
Display
R
oom
Control
Off
Mute
Screen
Li
ghting
Dece
m
b
e
r 15, 20
13 - 7:5
8
AM
Audio
Control
Volume
Mute
Tuner
1 2 3
VCR
L
a
pto
p
PC
D
VD
D
o
c
C
a
m
Tuner
On
Channel
Las
t
Presets
M
ore
Presets
3
2
1
6
5
4
9
8
7
Ente
r
0
RS-232
Ethernet
Ethernet
4K HDMI
4K DisplayPort
to HDMI
4K HDMI
Extron
SI 28
Surface-mount
Speakers
Extron
XPA 1002
Power Amplie
r
4K Display
RedRay Media Player
Local
Monitor
Up to 30 km (18.75 miles)
Singlemode Fiber
SM Model
Audio
RS-232
Extron
FOX T HD 4K
Fiber Optic Transmitter
Extron
FOX R DP 4K
Fiber Optic Receiver
Extron
TLP Pro 720T
7" Table Top
TouchLink Pro
Touchpanel
TCP/IP
Network
Extron
IPCP Pro 250
IP Link Pro
Control Processor
Figure 1. Typical FOX II T HD 4K Transmitter Application, with FOX II R DP 4K
About the FOX II T HD 4K Transmitter
The FOX II T HD 4K Transmitter is an ultra-high performance fiber optic Extender for
long haul transmission of HDCP-compliant HDMI video, audio, and RS-232 and IR
control signals over fiber optic cabling. The transmitter is compatible with the Extron
FOX II R DP 4K and all other Extron FOX II receivers. The transmitter and compatible
receiver can extend HDMI signals up to 30 km (18.75 miles) for the singlemode model (see
Fiber Cable Transmission Modes on the next page).
FOX II T HD 4K Transmitter • Introduction 3
The FOX II T HD 4K transmitter accepts HDMI video, at a resolution of up to 4K (4096x2160
at 30 Hz). The video input can also include embedded audio. The transmitter also loops the
HDMI input through for a local monitor.
The transmitter can accept an analog audio input on either a 3.5 mm mini jack or a 5-pole
captive screw connector. The transmitter automatically detects whether embedded audio is
present on the HDMI input. If none is detected, the transmitter selects the analog audio for
the unit to embed in the digital video stream and transmit to the receiver. An SIS command
selects either audio.
The transmitter accepts a one-way (transmitter-to-receiver) RS-232 and IR communication
signal input (for applications such as projector control). The transmitter can receive an
optional return (receiver-to-transmitter) stream of serial RS-232 and IR communications from
a controlled device, such as projector responses.
The transmitter converts the HDMI video, the selected audio, and the RS-232 serial
communication into a proprietary data stream and outputs it as an optical signal via fiber
optic small form factor pluggable (SFP) modules on a single LC connector to a compatible,
Extron FOX II fiber optic receiver. It also can receive an audio return channel.
The transmitter has a built-in color bars test pattern to assist in setting up the display.
The transmitter has many controls, including audio adjustments, that are available under
RS-232 and USB port SIS control. The unit also has video, audio, fiber light status, and
lost-light alarm indicators.
The FOX II T HD 4K transmitter is compatible with all Extron FOX II receivers only.
Fiber Cable Transmission Modes
The transmitter is further categorized by the type of fiber optic cable, multimode or
singlemode, which defines the effective range of transmission:
Multimode — FOX II T HD 4K MM, long distance, up to 2 km (6,560 feet) (depending on
the fiber cable)
Singlemode — FOX II T HD 4K SM, very long distance, up to 30 km (18.75 miles)
NOTE: The multimode and singlemode units are physically and functionally identical,
with the exception of the effective range of transmission. In this guide, any reference
applies to either transmission mode unless otherwise specified.
Features
Ultra high performance — Offers lossless HDMI video transmission, up to 4K
(4096x2160 at 30 Hz).
Video input — The transmitter accepts an input from an HDMI source.
Loop-through — The transmitter has a digital video loop-through on an HDMI
connector that allows connection of a local monitor.
HDCP Compliant
Key Minder — Authenticates and maintains continuous HDCP encryption between
input and output devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single source signal to one
or more displays.
EDID Minder — Automatically manages EDID communication between connected
devices to ensure that all sources properly power up and reliably display content.
FOX II T HD 4K Transmitter • Introduction 4
Compatibility with FOX Matrix Switchers
Audio embedding — Converts analog stereo audio signals to digital HDMI audio when
the analog input is selected.
Two analog audio inputs — The transmitter accepts an unbalanced stereo or mono
audio input on a 3.5 mm mini jack and a balanced or unbalanced stereo or mono audio
on a 5-pole captive screw connector.
Automatic audio detection and switching — The transmitter can automatically
detect digital audio embedded in the HDMI input and select it for transmission. If the
transmitter does not detect embedded audio, it switches to the analog audio input.
Or, you can manually select either audio input with an SIS command.
Analog audio input gain and attenuation — The level of the analog audio input can
be adjusted within a range of -18 dB (attenuation) to +24 dB (gain) via the RS-232 serial
port or USB port.
Audio Return Channel — The transmitter and a compatible receiver support analog
audio return from the receiver to the transmitter, such as for return of a microphone
input back to the transmitter.
Bidirectional RS-232 and IR signals over fiber optic cabling for AV device
control
LED indicators for signal presence, HDCP, and power — Provides a visual
indication of system status for real-time feedback and monitoring of key performance
parameters.
Loss-of-light alarms — The transmitter has a discrete output that indicates if the link
from the receiver has suffered a loss of the light signal.
Alarm notification for fiber link loss — The transmitter can be set up to trigger an
external control system for immediate notification when a fiber link has been lost. This
requires a second fiber link.
Product Configuration Software — For remote control from a PC, the Extron
Product Configuration Software, which runs under Microsoft® Windows®, provides a
graphical interface and drag-and-drop/point-and-click operation.
Simple Instruction Set — The transmitter uses the SIS for easy remote control
operation.
Upgradable firmwar
e — The firmware that can be upgraded in the field via the
USB Configuration port without taking the unit out of service. Firmware upgrades
are available for download on the Extron website and they can be installed using the
Product Configuration Software.
Rack mounting
— The FOX II unit is rack mountable in any conventional 19-inch wide
rack, using an Extron 9.5-inch deep rack shelf.
Power — The 100 VAC to 240 VAC, 50-60 Hz internal power supply provides
worldwide power compatibility and low power consumption.
FOX II T HD 4K Transmitter • Installation and Operation 5
Installation and
Operation
This section details the installation of the FOX II T HD 4K transmitter, including:
Installation Overview
Connections
Indications and Operation
Installation Overview
Follow these steps to install and set up an Extron FOX II T HD 4K transmitter for operation:
c Turn off all of the equipment. Ensure that the video sources and the output display are
all turned off and disconnected from the power source.
c Mount the transmitter (see Mounting the Unit on page 32).
c Connect the cables and configure the units (see “Connections”).
c Plug in the power supplies, then turn on the display and the input.
Connections
Rear Panel
100-240V ~ 0.5A MAX
50-60 Hz
HDMI LOOP THRU
LR
RS-232
OPTICAL
Tx
RESET
LINK
LINK
Rx
RS-232 IR
ALARM
Tx Rx G1 2
LR
Tx Rx Tx RxG
AUDIO
INPUTS
AUDIO
RETURN OUT
OVER
FIBER
REMOTE
FOX T HD 4K
II AA HH
EE
GGFFDDBB CC
Figure 2. FOX II T HD 4K Transmitter Rear Panel Connectors
A
HDMI input port (see page 6)
F
Remote RS-232 port (see page 6)
B
Loop-Thru port (see page 6)
G
Alarm port (see page 6)
C
Analog Audio input ports (see page 6)
H
Optical port and LEDs (see page 7)
D
Audio Return Out port (see page 6)
I
Power connector (see page 7)
E
Over Fiber port (see page 6)
FOX II T HD 4K Transmitter • Installation and Operation 6
A
HDMI input port (see figure 2 on the previous page) — Connect a digital
HDMI
video input to this HDMI connector. The transmitter also accepts embedded
digital audio on this connector.
B
Loop-through port — If desired, connect a local monitor to this HDMI
LOOP THRU
connector.
C
Analog audio input ports — These connectors accept the analog,
LR
AUDIO
unamplified, line level audio input that can be transmitted to the
receiver (see Audio connections on page 9 to wire these
connectors).
TRS connector — Plug an unbalanced audio input into this stereo TRS connector.
Captive screw input connector — Connect a balanced or unbalanced audio input to
this 3.5 mm, 5-pole captive screw connector.
NOTE: If both the TRS and captive screw audio connector are connected, the TRS
takes priority.
D
Audio Return Out port — Connect an audio device, such as an amplifier
LR
AUDIO
RETURN OUT
or powered speakers to this 5-pole, 3.5 mm captive screw connector. This
connector outputs returned, unamplified, line level audio from the receiver
(see Audio connections on page 9 to wire this connector).
E
Over Fiber RS-232 and IR port — Connect a serialRS-232 signal, a
RS-232 IR
Tx Rx Tx RxG
OVER
FIBER
modulated or unmodulated IR signal, or both to this 3.5 mm, 5-pole
captive screw connector for bidirectional RS-232 and IR communication.
See RS-232 and IR connections on page 9 to wire the connector.
NOTES:
If you connect only one fiber optic cable (see item
H
, on the next page), you
will not receive RS-232 or IR reports from the controlled device. To receive
responses from the controlled device, you must install two fiber optic cables.
The FOX II T HD 4K can pass RS-232 commands and r
esponses at rates up to
115200 baud.
RS-232 and IR can be active simultaneously.
F
Remote RS-232 port — For serial control of the transmitter, connect a
RS-232
ALAR
M
Tx Rx G
12
REMOTE
host device, such as a computer or touch panel control, via the three
leftmost poles (Tx, Rx, and G) of this 5-pole captive screw connector (see
RS-232 and IR connections on page 9 to wire this connector). See
Remote Control on page 14 for SIS commands.
G
Alarm port — For remote monitoring of the status of the Rx fiber optic link
RS-232
ALARM
Tx Rx G
12
REMOTE
(the optional fiber cable), connect an external control system or a locally-
constructed or furnished monitoring device to the transmitter via the two
rightmost poles (1 and 2) of this 5-pole captive screw connector. When the
transmitter does not detect a light link on fiber cable Rx (optional), pin 1 and
pin 2 of this port are shorted together (see Alarm connection on page 11 to wire this
connector).
FOX II T HD 4K Transmitter • Installation and Operation 7
H
Fiber optic ports and LEDs (see figure 2 on page 5)—
WARNING: The FOX II T HD 4K outputs continuous invisible light (Class 1 rated),
which may be harmful to the eyes; use with caution. Plug the attached dust cap
into the optical transceiver when the fiber optic cable is unplugged.
AVERTISSEMENT :
Le FOX II T HD 4K émet une lumièr
e invisible en continu
(conforme à la classe1) qui peut être dangereux pour les yeux, à utiliser avec
précaution Branchez la protection contre la poussière dans l’ensemble
émetteur/récepteur lorsque le câble fibre optique est débranché.
NOTES:
Ensur
e that you use the proper fiber cable for your transmitter. Typically,
singlemode fiber has a yellow jacket and multimode cable has an orange or
aqua jacket.
Only one fiber optic cable, transmitter
-Tx-to-receiver-Rx, is required for video,
audio, and RS-232 and IR signal transmission. But, if you connect only one
fiber optic cable:
The digital video signal output by the receiver is not HDCP-compliant.
You will not receive RS-232 reports or return audio from the controlled
device.
To receive responses from the controlled device and for HDCP compliance,
you must install both fiber optic cables.
1
Tx (required) — For all one-way video, audio, and serial
ansmitter
to
Receiver
Rx
Tx
LINK
OPTICAL
LINK
1
communications from the transmitter to the receiver, connect a
fiber optic cable to the Tx LC connector.
Connect the opposite end of this fiber optic cable to the Rx LC
connector on a FOX II R DP 4K receiver or to any other compatible
Extron FOX II device.
2
Rx (optional) — For one-way return audio and serial
communications from the receiver to the transmitter, connect a
fiber optic cable to the Rx LC connector.
Connect the opposite end of this fiber optic cable to the Tx LC
connector on a FOX II R DP 4K receiver or to any other compatible
Extron FOX II device.
Tx Link and Rx Link LEDs — When lit, the link is active (light is
sensed).
I
Power input — Plug a standard IEC power cord into this connector to connect the
transmitter to a 100 VAC to 240 VAC, 50-60 Hz power source. The lit LED indicates
power is applied.
FOX II T HD 4K Transmitter • Installation and Operation 8
Front Panel Configuration Port
Configuration port — Connect a controlling device, such as a PC,
CONFIG
CONFIG
PORT
to this mini USB B port for control of all functions of the transmitter
(see Remote Control on page 14 for SIS commands and software
control).
This mini USB B port serves a similar communications function as the
rear panel Remote RS-232 port (see item
F
on page 6), but it is easier
to access than the rear port after the transmitter has been installed and
cabled.
NOTE: A front panel Configuration port connection and a rear panel Remote RS-232
port connection can both be active at the same time. If commands are sent
simultaneously to both, the command that reaches the processor first is handled first.
Connection Considerations
HDMI connections
HDMI signals run at a very high frequency and are prone to errors caused by bad
connections or excessive cable length. To avoid the loss of an image or jitter, follow these
guidelines:
Do not exceed 6.5 feet (2 meters) on the input or buffered loop-through of the
FOX II T HD 4K transmitter.
Use only the cable specifically designed and intended for high speed digital signals
that is supplied by Extron. Use of non-HDMI cables or modified cables can result in a
missing video output.
LockIt Lacing Bracket
Use the LockIt Lacing Brackets, supplied with the transmitter, to securely fasten HDMI
cables to the device as follows:
1. Plug the HDMI cable into the panel connection (see figure 3,
1
).
3
33
11
44
55
22
Figure 3. Installing the LockIt Lacing Bracket
2. Loosen the HDMI connection mounting screw from the panel enough to allow the LockIt
Lacing Bracket to be placed over it (
2
). The screw does not have to be removed.
FOX II T HD 4K Transmitter • Installation and Operation 9
3. Place the LockIt Lacing Bracket on the screw and against the HDMI connector, then
tighten the screw to secure the bracket (see figure 3,
3
).
ATTENTION:
Do not overtighten the HDMI connector mounting scr
ew. The shield it fastens
to is very thin and can easily be stripped.
Ne serr
ez pas trop la vis de montage du connecteur HDMI. Le blindage auquel
elle est attachée est très fin et peut facilement être dénudé.
4.
Loosely place the included tie wrap ar
ound the HDMI connector and the LockIt Lacing
Bracket as shown (
4
).
5. While holding the connector securely against the lacing bracket, use pliers or similar
tools to tighten the tie wrap, then remove any excess length (
5
).
RS-232 and IR connections
Figure 4 shows how to wire the RS-232 and IR connectors.
Ground
Receive pin on connected unit
Transmit pin on connected unit
Connected RS-232
Device Pins
Tx/Rx
Pins
Rx
Tx
Figure 4. RS-232 and IR Connector Wiring
NOTES:
The length of exposed wir
es is important. The ideal length is 3/16 inch (5 mm).
Longer bar
e wires can short together.
Shorter wires are not as secure in the connectors and could be pulled out.
Do not tin the power supply leads before installing them in the connector. Tinned
wires are not as secure in the connector and could be pulled out.
Audio connections
NOTE: The level of the analog audio inputs can be set via an SIS command
(see page 18) or using the Product Configuration Software Analog Input Gain
control (see page 26).
The following table shows the audio format that is sent over the fiber connection, along with
the HDMI video, when the audio input format is set to Auto (the default setting, see the
Input audio selection SIS commands on page 18 to switch the active audio source).
Embedded HDMI
Audio
Analog Audio
Transmitted Audio
Present Not present Embedded audio
Present Present Embedded audio
Not present Present Analog audio
Not present Not present No audio
FOX II T HD 4K Transmitter • Installation and Operation 10
3.5 mm TRS input and output connections
See figure 5 to identify the tip, ring, and sleeve when you are making connections for the
transmitter from existing audio cables. A mono audio connector consists of the tip and
sleeve. A stereo audio connector consists of the tip, ring, and sleeve.
Tip (L+) Sleeve (Gnd)
Tip (L+)
Ring (R+)
Sleeve (Gnd)
Figure 5. Stereo Plug Audio Connector
Captive screw input connections
See figure 6 to properly wire the captive screw input connector.
Unbalanced Stereo Input
Balanced Stereo Input
Do not tin the wires!
Tip
Ring
Tip
Ring
LR
Sleeves
Tip
Sleeve
Sleeve
Tip
LR
Figure 6. Captive Screw Connector Wiring for Stereo Audio Inputs
NOTE: The length of exposed wires is important (see the RS-232 and IR connector
NOTES on page 9 for more information).
Captive screw output connection
See figure 7 to properly wire the captive screw output connector. The connector is included
with transmitter, but you must supply the audio cable. Use the supplied tie-wrap to strap the
audio cable to the extended tail of the connector.
Unbalanced Stereo Output Balanced Stereo Output
Do not tin the wires!
Tip
No Ground Here
No Ground Here
Tip
LR
Sleeves
Tip
Ring
Tip
Ring
LR
Sleeves
Figure 7. Captive Screw Connector Wiring for Stereo Audio Output
ATTENTION:
For unbalanced audio, connect the sleeves to the ground contact. DO NOT
connect the sleeves to the negative (-) contacts.
Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne
PAS
connecter les manchons aux contacts négatifs (–).
NOTE: The length of exposed wires is important (see the RS-232 and IR connector
NOTES on page 9 for more information).
FOX II T HD 4K Transmitter • Installation and Operation 11
Alarm connection
ALARM
Tx Rx 1 2
Pin 1 and pin 2 are
shorted together when
no light is detected.
Do not tin the wires!
RS-232
OVER FIBER
Figure 8. Alarm Connector
NOTE: The length of exposed wires is important (see the RS-232 and IR connector
NOTES on page 9 for more information).
Indications and Operation
Front Panel Features
CONFIG
SELECT
SIGNAL
VIDEO
HDMI FIBER OPTIC TRANSMITTER
AUDIOEDID
HDCP
INPUT
RETURN OUT
FOX T HD 4K
AA DDBB CC
Figure 9. FOX II T HD 4K Front Panel Features
A
(power) indicator — Indicates that power is applied to the unit.
B
Video LEDs
Signal LED — Lights when the transmitter detects an active signal on its video input.
HDCP LED — Lights when the input signal is HDCP encrypted.
C
Audio LEDs
Input LED — Lights when an analog audio or PCM digital audio signal remains above
-35 dBV. The LED goes dark if the audio signal level drops below the threshold for 10
seconds or longer.
Return Out LED — Lights when analog audio is present on the Audio Return Output
connector.
FOX II T HD 4K Transmitter • Installation and Operation 12
D
EDID Select rotary switch (see figure 9 on the previous page) — Set this
SELECT
EDID
switch to one of the positions below to select the source of the DDC or a
specific resolution.
Position 0 — A user-recorded EDID that has been previously:
Captured from the display connected to the receiver output.
Captured from the display connected to transmitter HDMI Loop-through connector
(see item
B
on page 6).
Manually imported via an SIS command (see page 17) or Product Configuration
Software action (see page 24) to the transmitter.
Position 1 — The EDID is selected via the rear panel Remote RS-232 port or the front
panel Configuration port, using an SIS command or the Product Configuration Software.
This is the factory default position.
Position 2 — The EDID is received from the display connected to the receiver.
NOTE: EDID from the display connected to the receiver requires connection of both
fiber cables.
Position 3 — The EDID is received from the display connected to the HDMI Loop-
through connector (see item
B
).
Position 4 – E — Specify a resolution. The table below identifies the switch positions
and the associated resolutions. All resolutions are at 60 Hz with the exception of
4096x2160 (E), which is 30 Hz.
Pos. Source or resolution Pos. Resolution Pos. Resolution
0 User recorded EDID 6 1366x768 C 2048x2160
1 Selected via RS-232 7 1440x900 D 2560x1600
2 Display on Rx output 8 1680x1050 E* 4096x2160
3 Display on Tx loop-through 9 1920x1080 (1080p) F N/A
4 1280x720 (720p) A 1920x1200
5 1280x800 B 2048x1080
* 30 Hz
Rear Panel Features
Reset button — Press and release or press and hold this button to initiate two
RESET
LINK
FOX T HD 4K
Reset
Button
levels of transmitter reset (see Performing resets on the next page).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

Extron FOX II T HD 4K Manuel utilisateur

Catégorie
Commutateurs vidéo
Taper
Manuel utilisateur

dans d''autres langues