CHAUVET DJ Swarm 5 FX Manuel utilisateur

Catégorie
Projecteurs
Taper
Manuel utilisateur

Ce manuel convient également à

User Manual
English
Español
Français
Deutsche
Nederlands
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
CLASSIFIED PER EN/IEC 60825-1:2007
Complies with FDA performance standards for
laser products except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007.
Table of Contents
Swarm 5 FX User Manual Rev. 5
i
TABLE OF CONTENTS
. Warranty/Garantía/Garantie...........................................................................
1
Limited Warranty...................................................................................................... 1
Garantía Limitada..................................................................................................... 1
Garantie Limitée....................................................................................................... 1
Eingeschränkte Garantie.......................................................................................... 2
Beperkte Garantie.................................................................................................... 2
1. Before You Begin ......................................................................................... 3
What Is Included ...................................................................................................... 3
Unpacking Instructions............................................................................................. 3
Claims ............................................................................................................................ 3
Text Conventions ..................................................................................................... 3
Symbols ................................................................................................................... 3
Disclaimer ................................................................................................................ 3
Intellectual Property ................................................................................................. 3
Safety Notes............................................................................................................. 4
Non-Interlocked Housing Warning ................................................................................. 5
Laser Safety Notes................................................................................................... 5
Laser Safety Label Reproduction............................................................................. 6
Laser Exposure Warning................................................................................................ 6
Laser Emission Data................................................................................................ 6
Laser Compliance Statement................................................................................... 6
2. Introduction................................................................................................... 7
Product Overview..................................................................................................... 7
Product Dimensions................................................................................................. 7
3. Setup.............................................................................................................. 8
AC Power................................................................................................................. 8
Fuse Replacement ......................................................................................................... 8
Power Linking................................................................................................................. 8
Mounting .................................................................................................................. 9
Orientation...................................................................................................................... 9
Rigging........................................................................................................................... 9
Proper Usage........................................................................................................... 9
4. Operation....................................................................................................... 10
Control Panel Operation........................................................................................... 10
Menu Map ................................................................................................................ 10
Configuration (DMX) ................................................................................................ 10
Starting Address............................................................................................................. 10
DMX Channel Assignments and Values .................................................................. 11
9-Channel....................................................................................................................... 11
Configuration (Standalone) ...................................................................................... 13
Automatic Mode ............................................................................................................. 13
Sound-Active Mode........................................................................................................ 13
Master/Slave Mode .................................................................................................. 13
5. Maintenance.................................................................................................. 14
Product Maintenance ............................................................................................... 14
6. Technical Specifications.............................................................................. 15
Returns.............................................................................................................. 16
Contact Us......................................................................................................... 17
Swarm 5 FX User Manual Rev. 5
Índice
ii
ÍNDICE
1. Antes de Empezar ........................................................................................
18
Qué va Incluido ........................................................................................................ 18
Instrucciones de Desembalaje................................................................................. 18
Reclamaciones............................................................................................................... 18
Convenciones del Manual........................................................................................ 18
Símbolos .................................................................................................................. 18
Exención de responsabilidad ................................................................................... 18
Propiedad intelectual................................................................................................ 18
Notas de Seguridad ................................................................................................. 19
Advertencia sobre Carcasa no Cerrada......................................................................... 20
Notas de Seguridad sobre Láser ............................................................................. 20
Reproducción de la Etiqueta de Seguridad del Láser.............................................. 21
Advertencia sobre Exposición al Láser .......................................................................... 21
Datos de Emisión Láser........................................................................................... 21
Declaración de Conformidad Láser.......................................................................... 21
2. Introducción.................................................................................................. 22
Vista general del producto ....................................................................................... 22
Dimensiones del producto........................................................................................ 22
3. Instalación..................................................................................................... 23
Corriente alterna ...................................................................................................... 23
Sustitución del fusible .................................................................................................... 23
Alimentación en cadena................................................................................................. 23
Montaje .................................................................................................................... 24
Orientación..................................................................................................................... 24
Colocación ..................................................................................................................... 24
Uso Adecuado.......................................................................................................... 24
4. Funcionamiento............................................................................................ 25
Funcionamiento del panel de control ....................................................................... 25
Mapa de menú ......................................................................................................... 25
Configuración (DMX)................................................................................................ 25
Dirección de inicio .......................................................................................................... 25
Valores y asignaciones de canal DMX..................................................................... 26
9 canales........................................................................................................................ 26
Configuración (Independiente)................................................................................. 28
Modo automático............................................................................................................ 28
Modo sonido................................................................................................................... 28
Modo Maestro/Esclavo............................................................................................. 28
5. Mantenimiento .............................................................................................. 29
Mantenimiento del producto..................................................................................... 29
6. Especificaciones Técnicas.......................................................................... 30
Devoluciones .................................................................................................... 31
Contacto............................................................................................................ 32
Table des matières
Swarm 5 FX User Manual Rev. 5
iii
TABLE DES MATIÈRES
1. Avant de Commencer...................................................................................
33
Ce Qui Est Compris ................................................................................................. 33
Instructions Relatives au Déballage......................................................................... 33
Réclamations ................................................................................................................. 33
Conventions manuelles............................................................................................ 33
Symboles ................................................................................................................. 33
Clause de Non-Responsabilité................................................................................. 33
Propriété intellectuelle.............................................................................................. 33
Consignes de Sécurité............................................................................................. 34
Avertissement : Boîtier non Verrouillable ....................................................................... 35
Consignes de Sécurité Relatives au Laser .............................................................. 35
Reproduction de l’Étiquette de Sécurité Laser......................................................... 36
Avertissement d'Exposition au Laser ............................................................................. 36
Données d'émission laser ........................................................................................ 36
Déclaration de Conformité Laser ............................................................................. 36
2. Introduction................................................................................................... 37
Vue d'ensemble du produit....................................................................................... 37
Dimensions du produit ............................................................................................. 37
3. Configuration................................................................................................ 38
Alimentation CA........................................................................................................ 38
Remplacement des fusibles........................................................................................... 38
Connexion électrique ..................................................................................................... 38
Installation................................................................................................................ 39
Orientation...................................................................................................................... 39
Suspension .................................................................................................................... 39
Utilisation Adéquate ................................................................................................. 39
4. Fonctionnement............................................................................................ 40
Fonctionnement du Panneau de Commande .......................................................... 40
Plan du menu........................................................................................................... 40
Configuration (DMX) ................................................................................................ 40
Adresse de départ.......................................................................................................... 40
Affectation de canaux DMX et valeurs ..................................................................... 41
9 canaux......................................................................................................................... 41
Configuration (Autonome)........................................................................................ 43
Mode Automatique ......................................................................................................... 43
Mode d'activation par le son .......................................................................................... 43
Mode maître/esclave................................................................................................ 43
5. Entretien........................................................................................................ 44
Entretien de l'appareil .............................................................................................. 44
6. Spécificités Techniques............................................................................... 45
Renvois.............................................................................................................. 46
Nous Contacter................................................................................................. 47
Swarm 5 FX User Manual Rev. 5
Inhaltsverzeichnis
iv
INHALTSVERZEICHNIS
1. Erste Schritte ................................................................................................
48
Packungsinhalt......................................................................................................... 48
Anweisungen für das Auspacken............................................................................. 48
Schadensmeldung ......................................................................................................... 48
Konventionen des Handbuchs ................................................................................. 48
Symbole ................................................................................................................... 48
Haftungsausschluss................................................................................................. 48
Geistiges Eigentum.................................................................................................. 48
Sicherheitshinweise ................................................................................................. 49
Achtung! Kein Schutz bei geöffnetem Gehäuse ............................................................ 50
Hinweise zur Lasersicherheit ................................................................................... 50
Warn- und Sicherheitsschilder auf dem Lasergerät ................................................. 51
Laserexposition – Warnung............................................................................................ 51
Laseremissionsdaten ............................................................................................... 51
Laser-Konformitätserklärung.................................................................................... 51
2. Einleitung ...................................................................................................... 52
Produktüberblick ...................................................................................................... 52
Produktabmessungen .............................................................................................. 52
3. Einrichten des Geräts .................................................................................. 53
Wechselstrom .......................................................................................................... 53
Auswechseln der Sicherung........................................................................................... 53
Reihenschaltung der Geräte .......................................................................................... 53
Montage ................................................................................................................... 54
Montagerichtung ............................................................................................................ 54
Hängende Montage........................................................................................................ 54
Bestimmungsgemäße Verwendung ......................................................................... 54
4. Betrieb ........................................................................................................... 55
Betrieb des Bedienfeldes ......................................................................................... 55
Menüstruktur ............................................................................................................ 55
Konfiguration (DMX)................................................................................................. 55
Startadresse................................................................................................................... 55
DMX-Kanal – Zuordnungen und Werte.................................................................... 56
9-Kanal........................................................................................................................... 56
Konfiguration (Einzelplatzmodus) ............................................................................ 58
Automatische-Modus ..................................................................................................... 58
Musiksteuerungs-Modus ................................................................................................ 58
Master/Slave-Modus ................................................................................................ 58
5. Wartung ......................................................................................................... 59
Wartung des Geräts ................................................................................................. 59
6. Technische Daten ......................................................................................... 60
Reklamationen.................................................................................................. 61
Kontaktiere Uns................................................................................................ 62
Inhoudsopgave
Swarm 5 FX User Manual Rev. 5
v
INHOUDSOPGAVE
1. Voordat tu begint ..........................................................................................
63
Wat is er inbegrepen ................................................................................................ 63
Uitpakinstructies....................................................................................................... 63
Claims ............................................................................................................................ 63
Tekstconventies........................................................................................................ 63
Symbolen ................................................................................................................. 63
Disclaimer ................................................................................................................ 63
Intellectueel eigendom ............................................................................................. 63
Veiligheidsinstructies................................................................................................ 64
Niet-bevestigde waarschuwing op de behuizing ............................................................ 65
Veiligheidsinstructies voor de laser.......................................................................... 65
Reproductie van veiligheidsetiket voor de laser....................................................... 66
Blootstellingswaarschuwing van de laser....................................................................... 66
Emissiegegevens van de laser ................................................................................ 66
Nalevingsverklaring van de laser ............................................................................. 66
2. Inleiding......................................................................................................... 67
Productoverzicht ...................................................................................................... 67
Productafmetingen................................................................................................... 67
3. Instelling........................................................................................................ 68
AC-stroom................................................................................................................ 68
Vervangen van de zekering............................................................................................ 68
Power Linking................................................................................................................. 68
Montage ................................................................................................................... 69
Oriëntatie........................................................................................................................ 69
Opbouw.......................................................................................................................... 69
Correct gebruik......................................................................................................... 69
4. Werking ......................................................................................................... 70
Werking van het bedieningspaneel .......................................................................... 70
Menu Map ................................................................................................................ 70
Configuratie (DMX) .................................................................................................. 70
Startadres....................................................................................................................... 70
DMX-kanaaltoewijzingen en waarden...................................................................... 71
9-kanaals........................................................................................................................ 71
Configuratie (zelfstandig) ......................................................................................... 73
Automatic Mode ............................................................................................................. 73
Geluidsactieve modus.................................................................................................... 73
Master/Slave-modus ................................................................................................ 74
5. Onderhoud .................................................................................................... 75
Productonderhoud.................................................................................................... 75
6. Technische Specificaties ............................................................................. 76
Retouren............................................................................................................ 77
Neem contact Op.............................................................................................. 78
Swarm 5 FX User Manual Rev. 5
Page 1 of 78
Warranty/Garantía/Garantie
Limited Warranty
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR
WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration
.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-registration
.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal
use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited
warranty on our website. This warranty extends only to the original purchaser of the product and is not
transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an
original sales receipt from an authorized dealer that shows the product name and date of purchase.
THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal
rights. You may also have other rights that vary from state to state and country to country. This warranty is
valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your
local distributor.
Garantía Limitada
PARA VER EL REGISTRO DE GARANTÍA Y LOS TÉRMINOS Y CONDICIONES COMPLETOS, VISITE
NUESTRO SITIO WEB.
Para clientes en los Estados Unidos y México: www.chauvetlighting.com/warranty-registration
.
Para clientes en Reino Unido, República de Irlanda, Bélgica, Países Bajos, Luxemburgo, Francia y
Alemania: www.chauvetlighting.eu/warranty-registration
.
Chauvet garantiza que este producto estará libre de defectos de material y mano de obra en condiciones
de uso normales, durante el periodo especificado, sujeto siempre a las exclusiones y limitaciones
establecidas en la garantía limitada completa de nuestro sitio web. Esta garantía se concede únicamente
al comprador original del producto y no es transferible. Para ejercer los derechos que otorga esta garantía,
usted debe proporcionar una prueba de compra en forma de un recibo de compra original, expedido por
un distribuidor autorizado, donde figure el nombre del producto y la fecha de compra. NO EXISTEN
OTRAS GARANTÍAS EXPRESAS NI IMPLÍCITAS. Esta garantía le otorga derechos legales específicos.
Es posible que a usted le asistan otros derechos, que variarán dependiendo del estado o del país. Esta
garantía solamente es válida en los Estados Unidos, Reino Unido, República de Irlanda, Bélgica, Países
Bajos, Luxemburgo, Francia, Alemania y México. Para conocer los términos de garantía en otros países,
consulte a su distribuidor local.
Garantie Limitée
VEUILLEZ VISITER NOTRE SITE INTERNET POUR CONSULTER LES MODALITÉES
D'ENREGISTREMENT DE LA GARANTIE ET LES CONDITIONS GÉNÉRALES COMPLÈTES.
Pour les clients aux États-Unis et au Mexique: www.chauvetlighting.com/warranty-registration
.
Pour les clients du Royaume-Uni, de la République d'Irlande, de la Belgique, des Pays-Bas, du
Luxembourg, de la France et de l'Allemagne: www.chauvetlighting.eu/warranty-registration
.
Chauvet garantit que cet appareil est exempt de défauts de matériaux et de fabrication dans des
conditions normales d'utilisation, pendant la période spécifiée dans la garantie limitée complète
consultable sur notre site Internet et sous réserve des exclusions et limitations qui y sont énoncées. Cette
garantie ne s'applique qu'à l'acheteur initial du produit et n'est pas transférable. Pour exercer les droits
prévus par cette garantie, vous devez fournir une preuve d'achat sous la forme d'un reçu de vente original
d'un revendeur autorisé qui indique le nom du produit et la date d'achat. IL N'EXISTE AUCUNE AUTRE
GARANTIE EXPRESSE OU IMPLICITE. Cette garantie vous confère des droits légaux spécifique. Vous
pouvez également bénéficier d'autres droits qui varient selon les états et les pays. Cette garantie n'est
valable qu'aux États-Unis, au Royaume-Uni, en République d'Irlande, en Belgique, aux Pays-Bas, au
Luxembourg, en France, en Allemagne et au Mexique. Pour connaître les conditions de garantie dans
d'autres pays, veuillez consulter votre revendeur local.
Swarm 5 FX User Manual Rev. 5
Page 2 of 78
Eingeschränkte Garantie
ZUR REGISTRIERUNG FÜR GARANTIEANSPRÜCHE UND ZUR EINSICHT IN DIE VOLLSTÄNDIGEN
GESCHÄFTSBEDINGUNGEN BESUCHEN SIE BITTE UNSERE WEBSITE.
Für Kunden in den USA und in Mexiko: www.chauvetlighting.com/warranty-registration
.
Für Kunden im Vereinigten Königreich, in Irland, Belgien, den Niederlanden, Luxemburg,
Frankreich und Deutschland: www.chauvetlighting.eu/warranty-registration
.
Chauvet garantiert für die in der auf unserer Website veröffentlichten vollständigen eingeschränkten
Garantie genannten Dauer und unter Vorbehalt der darin genannten Haftungsausschlüsse und -
beschränkungen, dass dieses Produkt bei normalen Gebrauch frei von Material- und Verarbeitungsfehlern
ist. Diese Garantie erstreckt sich nur auf den Erstkäufer des Produkts und ist nicht übertragbar. Zur
Ausübung der unter dieser Garantie gewährten Rechte ist der Kaufbeleg in Form der Originalrechnung
von einem autorisierten Händler vorzulegen, in der die Produktbezeichnung und das Kaufdatum vermerkt
sein müssen. ES BESTEHEN KEINE WEITEREN AUSDRÜCKLICHEN ODER STILLSCHWEIGENDEN
GARANTIEN. Diese Garantie gibt Ihnen besondere gesetzliche Rechte. Und Sie haben möglicherweise
weitere Rechte, die von Land zu Land unterschiedlich sein können. Diese Garantie ist nur in den USA, im
Vereinigten Königreich, in Irland, Belgien, den Niederlanden, Luxemburg, Frankreich, Deutschland und
Mexiko gültig. Bezüglich der Garantiebestimmungen in anderen Ländern wenden Sie sich bitte an Ihren
lokalen Händler.
Beperkte Garantie
GA NAAR ONZE WEBSITE VOOR REGISTRATIE VAN DE GARANTIE EN DE VOLLEDIGE
ALGEMENE VOORWAARDEN.
Voor klanten in de Verenigde Staten en Mexico: www.chauvetlighting.com/warranty-registration
.
Voor klanten in het Verenigd Koninkrijk, Ierland, België, Nederland, Luxemburg, Frankrijk en
Duitsland: www.chauvetlighting.eu/warranty-registration
.
Chauvet garandeert dat dit product bij normaal gebruik vrij zal blijven van defecten in materiaal en
vakmanschap, voor de opgegeven periode en onder voorbehoud van de uitzonderingen en beperkingen
die zijn uiteengezet in de volledige beperkte garantie op onze website. Deze garantie geldt uitsluitend voor
de oorspronkelijke koper van het product en is niet overdraagbaar. Om onder deze garantie rechten uit te
oefenen, moet u een aankoopbewijs overleggen in de vorm van een origineel verkoopbewijs van een
geautoriseerde dealer, waarop de naam van het product en de aankoopdatum zichtbaar zijn. ER ZIJN
GEEN ANDERE EXPLICIETE OF IMPLICIETE GARANTIES. Deze garantie geeft u specifieke wettelijke
rechten. Mogelijk heeft u ook andere rechten die van staat tot staat en van land tot land verschillen. Deze
garantie is uitsluitend geldig in de Verenigde Staten, het Verenigd Koninkrijk, Ierland, België, Nederland,
Luxemburg, Frankrijk, Duitsland en Mexico. Neem contact op met uw lokale verkoper voor
garantievoorwaarden in andere landen.
Page 3 of 78
Swarm 5 FX User Manual Rev. 5
Before You Begin
1. Before You Begin
What Is Included
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com
.
Intellectual Property
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2019 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and Swarm 5 FX are registered trademarks or trademarks of Chauvet &
Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company
and product names and logos referred to herein may be trademarks of their respective companies.
•Swarm5FX
Power Cord
User Manual
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Laser safety information.
Page 4 of 78
Before You Begin
Swarm 5 FX User Manual Rev. 5
Safety Notes
The Safety Notes include important laser system safety information. Read and understand all instructions
before powering on the laser for the first time. Knowing these safety instructions is crucial to avoiding laser
eye injury and breaking the law. Keep this User Manual in a safe place for future reference.
STOP AND READ ALL LASER SAFETY DATA
Lasers can be hazardous and have unique safety considerations. Permanent eye injury and
blindness are possible if lasers are used incorrectly. Pay close attention to each safety
REMARK and WARNING statement in this User Manual. Read all instructions carefully
BEFORE operating this device.
Always connect the product to a grounded circuit to avoid the risk of electrocution.
Always disconnect the product from the power source before cleaning.
Avoid direct eye exposure to the light source while the product is on.
Make sure the power cord is not crimped or damaged.
Never disconnect the product from power by pulling or tugging on the cord.
If mounting the product overhead, always secure to a fastening device using a safety cable.
Make sure there are no flammable materials close to the product when operating.
Do not touch the product’s housing when operating because it may be very hot.
This product is not intended for permanent installation.
Always make sure that the voltage of the outlet to which you are connecting the product is
within the range stated on the decal or rear panel of the product.
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the
product to rain or moisture.
Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
Be sure that no ventilation slots on the product’s housing are blocked.
Never connect the product to a dimmer.
Make sure to replace the fuse with another of the same type and rating.
Always use the mounting bracket to carry the product.
Do not switch the product on/off in short intervals. This will reduce the laser diode life.
Do not shake this product. Avoid brute force when mounting or operating this product.
ALWAYS use a safety cable when mounting the product overhead.
The ambient operating temperature for the laser is 59 °F to 95 °F (15 °C to 35 °C). Do not
operate this product outside this range.
In the event of a serious operating problem, stop using the product immediately.
Never try to repair the product. Repairs carried out by unskilled people can lead to damage or
malfunction. Contact the nearest authorized technical assistance center.
CAUTION! Use of controls, adjustments, or procedures other than THOSE specified IN
THIS USER MANUAL may result in hazardous radiation exposure.
Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to
direct laser light.
This laser product can potentially cause instant eye injury or blindness if laser light directly
strikes the eyes.
It is illegal and dangerous to shine this laser into audience areas, where the audience or other
personnel could get direct laser beams or bright reflections in
to their eyes.
It is a U.S. federal offense to shine any laser at aircraft.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect
from power via breaker or by unplugging it.
DO NOT attempt any repairs. Repairs and servicing must be carried out by a certified
technician. Unauthorized modifications are forbidden for safety reasons!
Keep this User Manual for future consultation. If transferring ownership of the product to
another user, be sure this document is kept with the laser.
Page 5 of 78
Swarm 5 FX User Manual Rev. 5
Before You Begin
Non-Interlocked Housing Warning
Laser Safety Notes
Laser light is different from any other light. Laser light can cause eye injury if the product is not set up and
used properly. Laser light is a thousand times more concentrated than any other kind of light. This
concentration can cause instant eye injuries by burning the retina (the light-sensitive portion at the back of
the eye). The heat from a laser light cannot be felt, but it can still injure or blind product operators and the
audience. Even very small amounts of laser light at long distances are potentially hazardous.
DO NOT assume that exposure to an individual laser beam is safe, even a tiny beam split off from a larger
beam. This laser product uses dozens of milliwatts of laser power—Class 3B levels internally—and splits
them into multiple beams—Class 3R levels. The individual Class 3R level beams are potentially hazardous
to the eyes.
DO NOT assume that a moving laser light is safe. Laser light is never without risk. Since eye injuries can
occur instantly, it is critical to prevent the possibility of ANY direct eye exposure. According to laser safety
regulations, it is not legal to aim Class 3R lasers into areas where people can be exposed, even if the laser
is aimed below people’s faces, such as at a dance floor.
This unit contains high power laser devices internally.
Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation.
The laser power levels, accessible if the unit is opened, can cause instant blindness, skin
burns, and fires.
STOP AND READ ALL THE LASER SAFETY NOTES BELOW
Do not operate the laser without first reading and understanding all the safety and technical
data in this manual.
ALWAYS set up and install all laser effects so that any laser light is at least 3 meters (9.8 feet)
above the floor on which people are standing. See the Proper Usage
section of this manual.
After setup, and prior to public use, test the lasers to ensure they are functioning properly. Do
not use the product if any defect is detected.
DO NOT point lasers at people or animals.
DO NOT look into the laser aperture or laser beams.
DO NOT point lasers into areas where people could be exposed to them.
DO NOT point lasers at highly reflective surfaces such as windows, mirrors, and shiny metal.
Even laser reflections can be hazardous.
Never point a laser at aircraft; this is a U.S. federal offense.
Never point unterminated laser beams into the sky.
Do not expose the output optic (aperture) to harsh cleaning chemicals.
Do not use the laser if the housing is damaged, open, or if the optics appear damaged in any
way.
Never open the laser housing. The high laser power levels inside of the protective housing can
start fires or burn skin, and will cause instant eye injury.
Never leave this product running unattended.
The operation of a Class 3R laser show is allowed only if the lasers are operated by a skilled
and well-trained professional, who is familiar with the data included in this manual.
The legal requirements for using laser entertainment products vary from country to country.
The user is responsible for the legal requirements in the location/country of use.
CAUTION! Do not operate this device in ways not specified in this User Manual. Failure to
follow the instructions will void the warranty, may damage the product, or injure the user
or the audience.
CAUTION! This product cannot be discarded with household waste. Contact your local
waste management service for electronic disposal regulations in your area.
Page 6 of 78
Before You Begin
Swarm 5 FX User Manual Rev. 5
Laser Safety Label Reproduction
Laser Exposure Warning
Laser Emission Data
As measured under IEC measurement conditions for classification.
Laser Compliance Statement
Complies with FDA performance standards for laser products except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007. No maintenance is required to keep this product in compliance with
laser performance standards.
LASER LIGHT AVOID DIRECT EYE EXPOSURE
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1
Standard “For Safe Use of Lasers”, available from the Laser Institute of America: www.lia.org
.
Many local governments, corporations, agencies, military, and others, require all lasers to be
used under the guidelines of ANSI Z136.1. Laser Display guidance can be obtained via the
International Laser Display Association: www.ilda.com
.
Laser Classification Class 3R
Red Laser Medium LD GaAIAs, 650 nm/100 mW
Green Laser Medium DPSS Nd:YVO4, 532 nm/50 mW
Beam Diameter <5 mm at aperture
Pulse Data All pulses < 4 Hz (>0.25 sec)
Divergence (each beam) <2 mrad
Divergence (total light) <160 degrees
Laser Power of Each Beam from Aperture <5 mW
RoHS
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
50 mW, 532 nm / 100 mW, 650 nm
Classied per EN/IEC 60825-1:2007
NOT FOR HOUSEHOLD USE
ORIGIN: MADE IN P.R.C.
(26
units @ 230 V)
MAX. OUTPUT CURRENT: 8 A (15 units @ 120 V)
MODEL: Swarm
TM
5 FX
FUSE: T 1.6 A, 250 V
DRY LOCATIONS
DISCONNECT POWER BEFORE SERVICING
USE ONLY FUSE OF SAME TYPE & RATING
THIS APPLIANCE MUST BE GROUNDED
SUNRISE, FLORIDA USA
CHAUVET WORLDWIDE HEADQUARTERS
USA/CANADA
Power: AC 100~125 V, 60 Hz
0.5 A, 62 W
WORLDWIDE
Power: AC 100~240 V, 50 Hz
0.3
A, 66 W
IMPROPRE A L’USAGE DOMESTIQUE
EMPLACEMENTS SECS
LIGHT SOURCE: LED, LASER
ITEM CODE: 10050765
LASER APERTURE
CAUTION
CLASS 3B LASER LIGHT WHEN OPEN
AVOID EXPOSURE TO THE BEAM
Page 7 of 78
Swarm 5 FX User Manual Rev. 5
Introduction
2. Introduction
Product Overview
Product Dimensions
DMX
In/Out
Fuse
Holder
Power
In
Power
Out
LED Indicators
Safety
Loop
White Strobes (x8)
Laser
Output
Microphone
Sensitivity
Knob
Derby Effect (x8)
DMX
Sound
Auto
Slave
Display and Control Buttons
<MENU> <UP> <DOWN> <ENTER>
9.75 in
248 mm
12.2 in
310 mm
11.7 in
298 mm
Page 8 of 78
Setup
Swarm 5 FX User Manual Rev. 5
3. Setup
AC Power
The Swarm 5 FX has an auto-ranging power supply and it can work with an input voltage range of 100 to
240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s
Technical Specifications
. The listed current rating indicates the product’s average current draw under
normal conditions.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
5. Insert the fuse holder back in place and reconnect power.
Power Linking
The product provides power linking via the outlet located in the back of the product. See the diagram below
for further explanation.
Power Linking Diagram
Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or
fire.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Disconnect the product from the power outlet before replacing the fuse.
Always replace a blown fuse with one of the same type and rating.
You can power link up to 15 Swarm 5 FX products on 120 VAC or up to 26 Swarm 5 FX
products on 230 VAC.
The power linking diagram shown above corresponds to the North American version of
the product ONLY! If using the product in other markets, you must consult with the local
Chauvet distributor as power linking connectors and requirements may differ in your
country or region.
Safety cap
Spare fuse holder
(inside safety cap)
Installed fuse
(held by plastic clip)
1
st
Product 2
nd
Product 3
rd
Product
Power
Source
Additional
Products
Page 9 of 78
Swarm 5 FX User Manual Rev. 5
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The Swarm 5 FX must be mounted in a position that includes planning for safe laser usage. In addition,
make sure adequate ventilation is provided around the product.
Rigging
Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming.
Make sure that the structure or surface onto which you are mounting the product can support the
product’s weight (see the Technical Specifications
)
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, such as an elevated platform or a truss.
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. The
bracket has a 13-mm hole, which is appropriate for this purpose.
The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Mounting Diagram
Proper Usage
This product is for overhead mounting only. For safety purposes, Chauvet recommends mounting lighting
effect products on steady elevated platforms or sturdy overhead supports using suitable hanging clamps.
In all cases, use safety cables. Obtain appropriate mounting hardware from your lighting vendor.
International laser safety regulations require that laser products must be operated in the fashion
illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor and
the lowest laser light. Additionally, 3 meters of horizontal separation is required between laser light
and audience or other public spaces.
CAUTION! Use of controls, adjustments, or procedures other than THOSE specified IN
THIS USER MANUAL may result in hazardous radiation exposure.
Safety Cable
(such as CH-05
from Chauvet)
Mounting Clamp
Mounting Bracket
Bracket Adjustment
Knob (x2)
3 meters
Page 10 of 78
Operation
Swarm 5 FX User Manual Rev. 5
4. Operation
This product is not designed for continual use. Make sure there are regular breaks during operation to
maximize the life of the lasers. Always disconnect the Swarm 5 FX from power when not in use.
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview
to see the button locations on the control panel.
Menu Map
Configuration (DMX)
The Swarm 5 FX works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website http://www.chauvetlighting.com/downloads/
DMX_Primer_rev05_WO.pdf.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some of the product’s channels could be
restricted.
The Swarm 5 FX uses 9 DMX channels, which defines the highest configurable address to 504.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com
.
To select the starting address, do the following:
1. Press <MENU> repeatedly until d001–506 shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the starting address.
3. Press <ENTER>.
Button Function
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Navigates upwards through the menu list or increases a selected numeric value
<DOWN> Navigates downwards through the menu list or decreases a selected numeric value
<ENTER> Enables the currently displayed menu or sets a selected value into the selected function
Mode Programming Levels Description
DMX Mode d001–506 Selects the DMX starting address
Automatic
Mode
AUT_
AUT0
S 1–100
Automatic program 0 (laser, derby, strobes)
and speed
AUT1
Automatic program 1 (laser, derby) and
speed
AUT2
Automatic program 2 (laser, strobes) and
speed
AUT3
Automatic program 3 (derby, strobes) and
speed
AUT4 Automatic program 4 (derby) and speed
AUT5 Automatic program 5 (laser) and speed
AUT6 Automatic program 6 (strobes) and speed
Sound-Active
Mode
SOU_
SOU0
Sound-active program 0 (laser, derby,
strobes)
SOU1 Sound-active program 1 (laser, derby)
SOU2 Sound-active program 2 (laser, strobes)
SOU3 Sound-active program 3 (derby, strobes)
SOU4 Sound-active program 4 (derby)
SOU5 Sound-active program 5 (laser)
SOU6 Sound-active program 6 (strobes)
Slave Mode SLA Slave mode
The display will continue to blink until the fixture receives a DMX signal.
Page 11 of 78
Swarm 5 FX User Manual Rev. 5
Operation
DMX Channel Assignments and Values
9-Channel
Channel Function Value Percent/Setting
1 Automatic Programs
000 009 Blackout
010 024 Auto program 0 (laser, derby, white strobes)
025 039 Auto program 1 (laser, derby)
040 054 Auto program 2 (laser, white strobes)
055 069 Auto program 3 (derby, white strobes)
070 084 Auto program 4 (derby)
085 099 Auto program 5 (laser)
100 114 Auto program 6 (white strobes)
115 129 Sound-active program 0 (laser, derby, strobes)
130 144 Sound-active program 1 (laser, derby)
145 159 Sound-active program 2 (laser, white strobes)
160 174 Sound-active program 3 (derby, white strobes)
175 189 Sound-active program 4 (derby)
190 204 Sound-active program 5 (laser)
205 219 Sound-active program 6 (white strobes)
220 255 DMX mode
2 Derby Color
000 009 Blackout
010 014 Red
015 019 Green
020 024 Blue
025 029 Amber
030 034 White
035 039 Red and white
040
044 Red and green
045 049 Green and blue
050 054 Blue and amber
055 059 Amber and white
060 064 Green and white
065 069 Green and amber
070 074 Red and amber
075 079 Red and blue
080 084 Blue and white
085 089 Red, green, and blue
090 094 Red, green, and amber
095 099 Red, green, and white
100 104 Red, blue, and amber
105 109 Red, blue, and white
110 114 Red, amber, and white
115 119 Green, blue, and amber
120 124 Green, blue, and white
125 129 Green, amber, and white
130 134 Blue, amber, and white
135 139 Red, green, blue, and amber
140 144 Red, green, blue, and white
145 149 Green, blue, amber, and white
150 154 Red, green, amber, and white
155 159 Red, blue, amber, and white
160 164 Red, green, blue, amber, and white
165
209 Automatic (one color at a time)
210 255 Automatic (two colors at a time)
Page 12 of 78
Operation
Swarm 5 FX User Manual Rev. 5
3
Derby Automatic Speed
(when Ch. 2 is 165 255)
000 255 Automatic speed, slow to fast
4 Derby Strobe
000 004 No function
005 254 Strobe, fast to slow
255 Sound-active strobe
5White Strobes
000 009 Blackout
010 019 Automatic program 1, fast to slow
020 029 Automatic program 2, fast to slow
030 039 Automatic program 3, fast to slow
040 049 Automatic program 4, fast to slow
050 059 Automatic program 5, fast to slow
060 069 Automatic program 6, fast to slow
070 079 Automatic program 7, fast to slow
080 089 Automatic program 8, fast to slow
090 099 Automatic program 9, fast to slow
100 109 Automatic program 10, fast to slow
110 255 On
6
Lasers
(when Ch. 7 is 005 254)
000 009 Blackout
010 049 Red on
050 089 Green on
090 129 Red and green alternating strobe
130 169 Red on, green strobe
170 209 Red strobe, green on
210
255 Red and green strobe
7
Laser Strobe
(when Ch. 6 is 010 255)
000 004 No function
005 254 Strobe, fast to slow
255 Sound-active strobe
8
Derby Motor
(when Ch. 2 is 010 255)
000 004 Stop
005 127 Rotate clockwise, slow to fast
128 133 Stop
134 255 Rotate counter-clockwise, slow to fast
9
Laser Motor
(when Ch. 6 is 010 255)
000 004 Stop
005 127 Rotate clockwise
128 133 Stop
134 255 Rotate counter-clockwise
For manual operation of LEDs and lasers using DMX control, set Channel 1 to 220 255.
Channel Function Value Percent/Setting
Page 13 of 78
Swarm 5 FX User Manual Rev. 5
Operation
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Automatic Mode
To run the Swarm 5 FX in automatic mode, follow the instructions below.
1. Press <MENU> repeatedly until AUT_ blinks on the display.
2. Use <UP> or <DOWN> to select the desired program, from:
AUT0 (laser, derby, and white strobes)
AUT1 (laser and derby)
AUT2 (laser and white strobes)
AUT3 (derby and white strobes)
AUT4 (derby)
AUT5 (laser)
AUT6 (white strobes)
3. Press <ENTER>.
4. Use <UP> or <DOWN> to increase or decrease the program speed, from S 1–100.
5. Press <ENTER>.
Sound-Active Mode
To run the Swarm 5 FX in sound-active mode, do the following:
1. Press <MENU> repeatedly until SOU_ blinks on the display.
2. Use <UP> or <DOWN> to select the desired program, from:
SOU0 (laser, derby, and white strobes)
SOU1 (laser and derby)
SOU2 (laser and white strobes)
SOU3 (derby and white strobes)
SOU4 (derby)
SOU5 (laser)
SOU6 white strobes)
3. Press <ENTER>.
4. Turn the music on and adjust the sound sensitivity knob until the product starts responding to the
beat of the music.
Master/Slave Mode
The Master/Slave mode allows a single Swarm 5 FX product (the “master”) to control the actions of one or
more Swarm 5 FX products (the “slaves”) without the need of a DMX controller. The master product will be
set to operate in standalone mode, while the slave products will be set to operate in slave mode. Once set
and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until SLA blinks on the display.
2. Press <ENTER>.
3. Connect the DMX input of the first slave product to the DMX output of the master product.
4. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave
product.
5. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in standalone mode.
2. Make the master product the first product in the DMX daisy chain.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
The product will only respond to low frequencies of music (bass and drums).
The laser will black out when in Sound-Active mode after 3 seconds of silence or noise
below the sensitivity setting.
Configure all the slave products before connecting the master to the daisy chain.
The display on the slave products will continue to blink until a signal from the master
product is received.
Never connect a DMX controller to a DMX string configured for Master/Slave operation
because the controller may interfere with the signals from the master.
Do not connect more than 31 slaves to the master.
Page 14 of 78
Maintenance
Swarm 5 FX User Manual Rev. 5
5. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
your lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

CHAUVET DJ Swarm 5 FX Manuel utilisateur

Catégorie
Projecteurs
Taper
Manuel utilisateur
Ce manuel convient également à