Aeg-Electrolux 68002K-MN Manuel utilisateur

Marque: Aeg-Electrolux

Modèle: 68002K-MN

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

68002 K-MN

User Manual

Notice d’utilisation

Ceramic glass induction

hob

Table de cuisson

vetrocéramique à

induction

Contents

Operating Instructions 3

Safety instructions 3

Description of the Appliance 4

Cooking surface layout 4

Control panel layout 5

Operating the appliance 6

Switching the appliance on and off 6

Setting the heat setting 6

Locking/unlocking the control panel 6

Using the child safety device 7

Switching the power function on and off 7

Using the timer 8

Automatic cut-out 11

Tips on Cooking and Frying 11

Cookware for induction cooking zones 11

Tips on energy saving 12

Examples of cooking applications 12

Cleaning and Care 13

What to do if … 14

Disposal 17

Installation Instructions 18

Service 19

Assembly 40

Rating Plate 43

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruc-

tion manual carefully. It will enable you to navigate all processes perfectly and most ef-

ficiently.

To refer to this manual any time you need to, we recommend you to keep it in a safe

place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

The following symbols are used in this user information:

Warning! This must be read! Important advice for the safety of persons and information

on avoiding damage to the appliance

3 General information and advice

2 Information on environmental protection

z Dangerous voltage

3Operating Instructions

Operating Instructions

1 Safety instructions

Please comply with these instructions. If you do not, any damage resulting is not cov-

ered by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose physical,

sensory or mental capabilities or lack of experience and knowledge prevents them

from using the appliance safely without supervision or instruction by a responsible

person to ensure that they can use the appliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and frying of food.

• The appliance must not be used as a work surface or as a storage surface.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or fusible ob-

jects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

• To avoid small children and pets unintentionally switching the appliance on, we rec-

ommend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered service en-

gineers.

• Built-in appliances may only be used after they have built in to suitable built-in units

and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic (cracks,

scratches or splits), the appliance must be switched off and disconnected from the

electrical supply, to prevent the possibility of an electric shock.

• Repairs to the appliance must only be carried out by trained registered service engi-

neers.

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of the appliance or

hot cookware.

• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should keep their upper body at least 30 cm from

induction cooking zones that are switched on.

Description of the Appliance4

• Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and

saucepan lids on the cooking surface, as they can get hot.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or high-pressure

cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by the cookware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch

the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceramic and

should be removed straightaway.

• Do not use the cooking zones with empty cookware or without cookware.

• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying

pans to boil dry.

• The ventilation gap of 5mm between the worktop and front of the unit underneath it

must not be covered.

Description of the Appliance

Cooking surface layout

Induction cooking zone 2200 W

with power function 3700 W

Induction cooking zone 1800 W

Induction cooking zone 1400 W

Control panel Induction cooking zone 1800 W

with power function 2800 W

5Description of the Appliance

Control panel layout

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by

touching sensor fields and confirmed by displays and acoustic signals.

Touch the sensor fields from above, without covering other sensor fields.

Displays

Sensor field Function

On / Off To switch the appliance on and off

Increase settings Increasing heat setting/time

Decrease settings Decreasing heat setting/time

Timer Timer selection

Lock Locking/unlocking the control panel

Power Switching the power function on and off

Display Description

Cooking zone is switched off

- Heat settings Heat setting is set

Fault Malfunction has occurred

Pan detection Cookware is unsuitable or too small or no cook-

ware has been placed on the cooking zone

Residual heat Cooking zone is still hot

Child safety device Lock/child safety device is engaged

Power Power function is switched on

Automatic switch off Switch off is active.

On/Off

with power indicator

Heat setting selection

Lock

Timer display

Power function

Cooking zone indicators

Timer function

Display

Timer

Operating the appliance6

Residual heat indicator

1 Warning! Risk of burns from residual heat. After being switched off, the cooking zones

need some time to cool down. Look at the residual heat indicator

3 Residual heat can be used for melting and keeping food warm.

The induction cooking zones create the heat required for cooking directly in the base

of the cookware. The glass ceramic is merely heated by the residual heat of the cook-

ware.

The cooling fan switches itself on and off depending upon the temperature of the elec-

tronics.

Operating the appliance

3 Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

3 After switching on, within approx. 10 seconds a heat setting or a function must be set,

otherwise the appliance automatically switches itself off.

Setting the heat setting

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in

order to prevent the settings being changed e.g. by wiping over the panel with a cloth.

3 When you switch the appliance off, the locking function is automatically switched off.

Control panel Display Pilot light

To switch on Touch for 1 second / lights up

To switch off Touch for 1 second / none goes out

Control panel Display

Increase Touch to /

Decrease Touch to

Switch off Touch and at the same time

Control panel Display

Switch on Touch (for 5 seconds)

Switch off Touch previously set heat setting

7Operating the appliance

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Setting the child safety device

Overriding the child safety device

The child safety device can be released in this way for a single cooking session; it

remains activated afterwards.

Releasing the child safety device

Switching the power function on and off

The power function makes more power available to the induction cooking zones, e.g.

to bring a large quantity of water to the boil quickly.

The power function is activated for 10 minutes at most. After that the induction cooking

zone automatically switches back to heat setting 9.

3 If the power function has ended, the cooking zones automatically switch back to the

heat setting set previously.

Step Control panel Display/Signal

1. Switch on the appliance

(Do not set a heat setting)

2. Touch until the signal sounds Acoustic signal

3. Touch

Appliance switches off. The child safety device is engaged.

Step Control panel Display/Signal

1. Switch on the appliance

2. Touch and at the same time / acoustic signal

Until the appliance is next switched off, it can be used as normal.

Step Control panel Display/Signal

1. Switch on the appliance

2. Touch until the signal sounds Acoustic signal

3. Touch

Appliance switches off. The child safety device is released.

Control panel Display

Switch on Touch

Switch off Touch

Touch

Operating the appliance8

Power Management

The cooking zones of the cooking surface have

a maximum power.

The maximum power is reached when the heat

setting 9 has been set for all cooking zones.

Two cooking zones generate a pair (see figure)

and therefore, the power management shares

the maximum available power between these

cooking zones.

When the power function is selected for one

cooking zone, the power management makes

the additional power for this cooking zone

available by reducing the power of the corre-

sponding other cooking zone.

Example: the heat setting 9 is selected on one

cooking zone. The power function is switched

on for the corresponding cooking zone. The

power function is carried out but the heat set-

ting 9 of one of the cooking zones and the

power function for the other cooking zone of

the pair exceed the maximum power for both

at the same time. For this purpose, the power management reduces the power of the

cooking zone that switched on first from 9 to example 5 and the display of this cooking

zone changes between 9 and 5 and then stays at the current possible maximum 5. (If the

display changes between 9 and 5 or 9 and 3 or another value depends on the type of

appliance and the size of the cooking zone.).

Using the timer

All cooking zones can use each use one of the two timer functions at the same time.

3 If a cooking zone is switched off, the timer function set is also switched off.

Function Condition Outcome after the time

has elapsed

Automatic cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone switches

off

Countdown timer cooking zones not in use acoustic signal

00 flashes

9Operating the appliance

Selecting a cooking zone

3 The heat setting indicator of the selected cooking zone goes out, as long as the timer

time can be set.

3 If the pilot light is flashing more slowly, the heat setting indicator appears again and the

heat setting can be re-set or modified.

3 If other timer functions are set, after a few seconds the shortest remaining time of all

the timer functions is displayed and the corresponding pilot light flashes.

Setting time

Step Control panel Display

1. Touch once Pilot light of the first cooking

zone flashes

2. Touch once Pilot light of the second cook-

ing zone flashes

3. Touch once Pilot light of the third cooking

zone flashes

4. Touch once Pilot light of the fourth cook-

ing zone flashes

Step Control panel Grill setting

1. Selecting cooking

zone

Telltale of cooking zone selected flashes

2. Touch or from the

selected cooking zone

01 to 99 minutes

3. Touch or from the

selected cooking zone for

more than 4 seconds

... 05...10...15... 20 or... 95... 90... 85...

80... (5-minute steps for easy setting)

After a few seconds the power indicator flashes more slowly.

The time is set.

The time counts down.

Operating the appliance10

Switching off the Timer function

Changing the time

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Step Control panel Display

1. Select a cooking zone Pilot light of the selected cooking zone flashes

more quickly.

Remaining time is displayed

2. Touch for the cooking

zone selected

The remaining time counts down to 00.

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected flashes

faster

The time remaining is displayed

2. Touch or for the

cooking zone selected

01 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected flashes

faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. Touch Acoustic signal to acknowledge.

Acoustic signal stops.

11Tips on Cooking and Frying

Automatic cut-out

Cooking surface

• If after switching on the cooking surface, a heat setting is not set for a cooking zone

within approx. 10 seconds, the cooking surface automatically switches itself off.

• If all cooking zones are switched off, the cooking surface automatically switches itself

off after approx. 10 seconds.

Induction cooking zones

• If cookware that is not suitable is used, lights up in the display and after 2 minutes

the indicator for the cooking zone switches itself off.

• If one of the cooking zones is not switched off after a certain time, or if the heat set-

ting is not modified, the relevant cooking zone switches off automatically. is dis-

played. Before being used again, the cooking zone must be set to .

Tips on Cooking and Frying

3 Information on acrylamides

According to the latest scientific knowledge, intensive browning of food, especially in

products containing starch, can constitute a health risk due to acrylamides. Therefore

we recommend cooking at the lowest possible temperatures and not browning foods

too much.

Cookware for induction cooking zones

Cookware material

3 * Cookware for induction cooking zones is labelled as suitable by the manufacturer.

Heat setting Switches off after

1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

Cookware material suitable

Cast iron +

Steel, enamelled steel +

Stainless steel +*

Multi-layer pan bottom +*

Aluminium, copper, brass -

Glass, ceramic, porcelain -

Tips on Cooking and Frying12

Suitability test

Cookware is suitable for induction cooking, if …

• ... a little water on an induction cooking zone set to heat setting 9 is heated very

quickly.

• ... a magnet sticks to the bottom of the cookware.

Cookware base

The bottom of the cookware should be as thick and flat as possible.

Pan size

Up to a certain limit, induction cooking zones adapt themselves to the size of the bot-

tom of the cookware automatically. However, depending on the cooking zone size, the

magnetic part of the bottom of the cookware must have a minimum diameter.

3 The cookware must be placed centrally on the cooking zone.

Tips on energy saving

2 Place cookware on the cooking zone before it is switched on.

2 If possible, always place a lid on the cookware.

Examples of cooking applications

The information in the table is for guidance only.

Diameter of cooking zone

[mm]

Minimum diameter of dish base [mm]

210 180

180 145

145 120

Heat

setting

Cooking-

process

suitable for

Cooking

time

Hints

0 Off position

Keeping

food warm

To keep cooked foods warm as necessary Cover

1-2

Melting

Hollandaise sauce,

to melt butter, chocolate,

gelatine

5-25 mins. Stir occasionally

Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on

2-3

Simmer-

ing on low

heat

To simmer rice and milk-

based dishes

To heat up ready meals

25-50 mins.

Add minimum twice as

much liquid as rice, stir

milk dishes some times

13Cleaning and Care

The power function is suitable for heating large quantities of liquid.

Cleaning and Care

1 Take care! Risk of burns from residual heat.

1 Warning! Sharp objects and abrasive cleaning materials will damage the appliance.

Clean with water and washing up liquid.

1 Warning! Residues from cleaning agents will damage the appliance. Remove residues

with water and washing up liquid.

Cleaning the appliance after each use

1. Wipe the appliance with a damp cloth and a little washing up liquid.

2. Rub the appliance dry using a clean cloth.

Removing deposits

1. Place a scraper on the glass ceramic surface at an angle.

2. Remove residues by sliding the blade over the surface.

3. Wipe the appliance with a damp cloth and a little washing up liquid.

4. Rub the appliance dry using a clean cloth

3-4

Steaming

Braising

To steam vegetables, fish

to braise meat

20-45 mins.

With vegetables add only

some liquid (some table-

spoons)

4-5 Boiling

To steam potatoes 20-60 mins.

Use only some liquid, e.g.:

max.

¼ l water for

750 g potatoes

To cook larger quantities of

food, stews and soups

60-150 mins.

3 l liquid maximum plus

ingredients

6-7

Gentle

Frying

To fry escalopes, veal cordon

bleu, cutlets, rissoles, sausag-

es, liver, roux, eggs, pancakes,

doughnuts

Steady frying Turn occasionally

7-8

Heavy

Frying

Hash browns, loin steaks,

steaks, Flädle (pancakes for

garnishing soup)

5-15 mins.

per pan

Turn occasionally

Boiling

Searing

Deep

frying

To boil large quantities of water, to cook pasta,

to sear meat (goulash, pot roast), deep frying chips

Heat

setting

Cooking-

process

suitable for

Cooking

time

Hints

What to do if …14

*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops

3 Remove stubborn residues with a cleaner for glass ceramic or stainless steel.

3 Scratches or dark stains on the glass ceramic that cannot be removed do not however

affect the functioning of the appliance.

What to do if …

Remove

Type of dirt

immedi-

ately

when the appliance has

cooled down

using

sugar, food containing sugar yes ---

a scraper*

plastics, tin foil yes ---

limescale and water rings --- yes

cleaner for glass ceram-

ic or stainless steel*

fat splashes --- yes

shiny metallic discolouration --- yes

Problem Possible cause Remedy

The appliance cannot be

switched on or is not operat-

ing

More than 10 seconds have

passed since the appliance was

switched on

Switch the appliance on again.

The lock is switched on Switch off the lock (See the

section “Locking/unlocking the

control panel”)

The child safety device is

switched on

Deactivate child safety device

(See the section “Child safety

device”)

Several sensor fields were

touched at the same time

Only touch one sensor field

Automatic switch off has been

triggered

Remove any objects (pan,

cloths, etc.) that are lying on

the control panel. Switch the

appliance on again

Dirty control panel The sensor fields must be dry

and fat-free.

The cooking zones automati-

cally reduce the cooking level

The sensor fields are partly

covered by a damp cloth or

with liquid

Remove the cloth or the liquid.

Reset the cooking level re-

quired.

15What to do if …

If you are unable to remedy the problem by following the above suggestions,

please contact your local Service Force Centre.

1 Warning! Repairs to the appliance are only to be carried out by qualified service engi-

neers. Considerable danger to the user may result from improper repairs.

3 If the appliance has been operated incorrectly, the engineer's visit will be chargeable,

even during the warranty period.

The residual heat indicator is

not displaying anything

The cooking zone was only on

for a short time and is there-

fore not hot

If the cooking zone is sup-

posed to be hot, call the Cus-

tomer Service Department.

acoustic signal sounds, appli-

ance switches off

One or more sensor fields have

been covered for longer than

10 seconds

Uncover sensor field

A signal sounds when the ap-

pliance is switched off

The control panel is partially or

completely covered by objects

Remove the objects

The appliance switches off, a

signal sounds repeatedly

The control panel was covered

too long

The appliance will be fully

functional after about

50 seconds

The sensor fields cannot be

operated

A single sensor field was cov-

ered for a short period

The sensor field is automati-

cally released after about 10

seconds

Display is switching between

two heat settings

Power management is reduc-

ing the power of this cooking

zone

See the section “Switching the

power function on and off”

lights up Unsuitable cookware Use suitable cookware

No cookware on the cooking

zone

Place cookware on the cook-

ing zone

The diameter of the bottom of

the cookware is too small for

the cooking zone

Move onto a smaller cooking

zone

Use suitable cookware

lights up Automatic switch-off has

been triggered

Switch off the cooking zone.

Switch the cooking zone on

again

and number are displayed Electronics fault Disconnect the appliance from

the electrical supply for a few

minutes (Take the fuse out of

the house’s wiring system)

If after switching on again,

is displayed again, call the cus-

tomer service department

Problem Possible cause Remedy

What to do if …16

Operating noises

Depending on the material and the processing of the base, the following noises may

occur when using induction cooking zones.

• Cracking noise (1)

when using cookware made of different materials (Sandwich construction)

• Whistling (1)

when using an individual cooking zone or several cooking zones with high powers

when the cookware is made of different materials (Sandwich construction)

• Humming (2)

can occur at high power levels

• Clicking (2)

during electric switching processes

• Hissing, buzzing (3)

The device is fitted with a fan for cooling the electrics. A whiring noise can be heard

when operating the fan which may deviate depending on the performance and may

continue for a while after the appliance is switched off.

The noises described are normal and do not refer to any defects.

17Disposal

Disposal

2 Packaging material

The packaging materials are environmentally friendly and can be recycled. The plastic

components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pack-

aging materials in the appropriate container at the community waste disposal facilities.

2 Old appliance

The symbol

W on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it shall be handed over to the applicable collec-

tion point for the recycling of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent potential negative consequences

for the environment and human health, which could otherwise be caused by inappropri-

ate waste handling of this product. For more detailed information about recycling of

this product, please contact your local city office, your household waste disposal service

or the shop where you purchased the product.

Installation Instructions18

Installation Instructions

1 Safety instructions

Warning! This must be read!

The laws, ordinances, directives and standards in force in the country of use are to be

followed (safety regulations, proper recycling in accordance with the regulations, etc.)

Installation may only be carried out by a qualified electrician.

The minimum distances to other appliances and units are to be observed.

Anti-shock protection must be provided by the installation, for example drawers may

only be installed with a protective floor directly underneath the appliance.

The cut surfaces of the worktop are to be protected against moisture using a suitable

sealant.

The sealant seals the appliance to the work top with no gap.

Do not use silicon sealant between the appliance and the work top.

When building in, protect the underside of the appliance from steam and moisture, e.g.

from a dishwasher or oven.

Avoid installing the appliance next to doors and under windows. Otherwise hot cook-

ware may be knocked off the rings when doors and windows are opened.

z Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Follow connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection by installing correctly.

• The appliance must be connected to the electrical supply by a qualified electrician.

z Risk of injury from electrical current.

• Loose and inappropriate plug and socket connections can make the terminal overheat.

• Have the clamping connections correctly installed by a qualified electrician.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connection, the appropriate mains cable of

type H05BB-F Tmax 90°C(or higher) or an equivalent type must be used.

• If this appliance’s mains cable is damaged, it must be replaced by a special cable (type

H05BB-F Tmax 90°C; or higher) or an equivalent type. The latter is available from the

Customer Care Department.

A device must be provided in the electrical installation which allows the appliance to be

disconnected from the mains at all poles with a contact opening width of at least 3 mm.

Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to

be removed from the holder), earth leakage trips and contactors.

19Service

Service

In the event of technical faults, please first check whether you can remedy the problem

yourself with the help of the operating instructions (section “What to do if…”).

If you were not able to remedy the problem yourself, please contact the Customer Care

Department or one of our service partners.

In order to be able to assist you quickly, we re-

quire the following information:

– three digit letter-number combination for

glass ceramic

– Model description

– Product number (PNC)

– Serial number (S No.)

(for numbers see rating plate)

– Type of fault

– Any error messages displayed by the appliance

So that you have the necessary reference num-

bers from your appliance at hand, we recommend that you write them in here:

Model description: .....................................

PNC: .....................................

S No: .....................................

Sommaire

Notice d'utilisation 21

Avertissements importants 21

Description de l'appareil 22

Equipement du plan de cuisson 22

Bandeau de commande 23

Utilisation de l’appareil 24

Mettre l’appareil sous/hors tension 24

Sélectionner le niveau de cuisson 25

Verrouiller/déverrouiller le bandeau de

commande 25

Utilisation de la sécurité enfants 25

Activer/désactiver la fonction Puissance 26

Utilisation du minuteur 27

Arrêt automatique 30

Conseils de cuisson 30

Plats pour cuisson sur zones de cuisson

à induction 30

Conseils d’économie d’energie 31

Exemples d’utilisation pour la cuisson 32

Nettoyage et entretien 33

Que faire si … 34

Protection de l’environnement 37

Instructions d'installation 38

Service après-vente 39

Montage 40

Plaque signalétique 43

Nous vous remercions d’avoir choisi l’un de nos produits de qualité.

Afin de garantir une performance optimale et constante de votre appareil, veuillez lire at-

tentivement cette notice d'utilisation. Il vous permettra d’utiliser correctement et effica-

cement toutes les fonctions de l’appareil. Nous vous recommandons de conserver cette

notice à proximité pour une utilisation rapide et optimale. Si l'appareil devez être vendu

ou cédé à une autre personne, assurez-vous que la notice d'utilisation l'accompagne.

Nous vous souhaitons beaucoup de plaisir avec votre nouvel appareil.

Les symboles suivants sont utilisés dans ce guide d'utilisateur :

Attention ! A lire impérativement ! Remarques importantes relatives à la sécurité des

personnes et informations destinées à prévenir les dommages causés à l'appareil

3 Remarques générales et recommandations

2 Remarques relatives à la protection de l'environnement

z Risque dû à l'alimentation électrique

La page charge ...

Aeg-Electrolux 68002K-MN Manuel utilisateur

Marque: Aeg-Electrolux

Modèle: 68002K-MN

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Aeg-Electrolux 68002K-MN User manual

Aeg-Electrolux 68002K-MN Manuel utilisateur

Aeg-Electrolux 68002K-MN Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents